cảm biến áp suất -phan1
-
Upload
bui-the -
Category
Technology
-
view
496 -
download
2
description
Transcript of cảm biến áp suất -phan1
Siemens FI01 · 2011
2/2 Product overview
Transmitters for basic requirements2/4 SITRANS P Z for gauge pressure2/6 SITRANS P Z for gauge and absolute pres-
sure2/13 SITRANS P250 for differential pressure2/18 SITRANS P MPS (submersible sensor)
Transmitter for hydrostatic level 2/22 SITRANS P Compact for gauge and ab-
solute pressure
Transmitters for pressure with WirelessHART communication
2/29 SITRANS P280 for gauge and absolute pressure
Transmitters for food, pharma-ceuticals and biotechnology
2/34 SITRANS P300 for gauge and absolute pressure
2/54 SITRANS P300 Accessories/Spare parts2/55 SITRANS P300 - Factory-mounting of
valve manifolds on transmitters
Transmitters for gauge pressure for the paper industrySITRANS P DS III and SITRANS P300 with PMC connection
2/57 Technical descriptionTechnical specifications, ordering data, dimensional drawings
2/62 - SITRANS P DS III with PMC connection2/68 - SITRANS P300 with PMC connection
Transmitters for general requirementsSITRANS P DS III
2/74 Technical descriptionTechnical specifications, ordering data, dimensional drawings
2/81 - for gauge pressure2/89 - for gauge and absolute pressure with
front-flush diaphragm2/100 - for absolute pressure (from gauge
pressure series)2/108 - for absolute pressure
(from differential pressure series)2/117 - for differential pressure and flow2/130 - for level2/139 SITRANS P DS III Supplementary
electronics for 4-wire connection2/141 SITRANS P DS III Accessories/Spare parts2/147 SITRANS P DS III - Factory-mounting of
valve manifolds on transmitters
Remote seals for transmitters and pressure gauges
2/150 Technical descriptionDiaphragm seals of sandwich design
2/158 - with flexible capillaryDiaphragm seals of flange design
2/161 - with flexible capillary2/164 - directly fitted on transmitter2/167 - fixed connection and with capillary
Diaphragm seal, screwed design2/170 - directly mounted or/and with capillary2/173 Quick-release diaphragm seals2/177 Miniature diaphragm seals2/179 Flushing rings for diaphragm seals2/181 Inline seals for flange-mounting2/184 Quick-release inline seals2/187 Measuring setups2/188 - with remote seals 2/190 - without remote seals2/192 Questionnaire
Fittings2/195 Technical description2/196 Selection aid
Shut-off valves for gauge and absolute pressure transmitters
2/198 - Shut-off valves to DIN 16270, DIN 16271 and DIN 16272
2/200 - Angle adapter2/201 - Double shut-off valves2/202 - Accessories for shut-off
valves/double shut-off valvesShut-off valves for differential pressure transmitters
2/203 - 2-, 3- and 5-spindle valve manifolds DN 52/206 - Multiway cocks PN 1002/208 - 3-way and 5-way valve manifolds DN 52/211 - 3-way valve manifold DN 82/214 - Valve manifold combination DN 5/DN 82/216 - Valve manifold combination DN 82/218 - 2-, 3- and 5-spindle valve manifolds
for installing in protective boxes2/222 - 3- and 5-spindle valve manifolds for
vertical angular diff. pressure lines2/225 - Low-pressure multiway cock
Accessories2/227 - Oval flange2/228 - Adapters, connection glands2/229 - Connection pieces, connection gland2/230 - Connection parts G½2/231 - Water traps, Sealing rings to EN 837-12/232 - Pressure surge reducers2/233 - Primary shut-off valves2/235 - Compensation vessels2/236 - Connection parts
You can download all instructions, catalogs and certificates for SITRANS P free of charge at the following Internet address: www.siemens.com/sitransp
Pressure Measurement
© Siemens AG 2010
Pressure MeasurementProduct overview
2/2 Siemens FI 01 · 2011
2
■ Overview
Application Description Software for parameteriza-tion
SITRANS P · Transmitters for basic requirements
Two or three-wire transmitters for measuring gauge and absolute pressure
SITRANS P ZCompact single-range transmittersAnalog electronicsAvailable ex stock
2/4 –
Two or three-wire transmitter for measuring differential pressure
SITRANS P250Compact single-range transmittersAnalog electronicsAvailable ex stock
2/13 –
Two-wire transmitter for mea-suring hydrostatic levels
SITRANS P MPS (submersible sensor)For measuring liquid levels in wells, tanks, channels, dams etc.
2/18 –
Transmitters for gauge and absolute pressure for food, pharmaceuticals and biotech-nology
SITRANS P CompactSingle-range transmitters in two-wire systemHygiene-based design with various aseptic connec-tions according to EHEDG, FDA and GMP recom-mendations.
2/22 –
SITRANS P · Transmitters with WirelessHART communication
Wireless transmitter with Wire-less HART for measuring gauge and absolute pressure
SITRANS P280Wireless communication with WirelessHARTBattery operationParameterization using 3 buttons and SIMATIC PDM with HART modem or wireless with WirelessHART
2/29 SIMATIC PDM
SITRANS P · Transmitters for food, pharmaceuticals and biotechnology
Two-wire transmitters for mea-suring gauge and absolute pressure
SITRANS P300• Hygiene-based design according to EHEDG, 3A,
FDA and GMP• Parameterization using 3 buttons and communica-
tion over HART, PROFIBUS PA or FOUNDATION Fieldbus
• Standard process connection G½", ½-NPT and front-flush process connections available
• Range adjustment 100: 1
2/34 SIMATIC PDM
Factory-mounting of valve manifolds on SITRANS P300 transmitters• Simplified assembly• With pressure test• Stainless steel valve manifolds
2/55 –
SITRANS P · Transmitter for gauge pressure for the paper industry
Two-wire transmitters for mea-suring gauge and absolute pressure
SITRANS P DS III and SITRANS P300 with PMC connection • Range adjustment 100: 1• Process connections for the paper industry• Parameterization using 3 buttons and HART,
PROFIBUS PA or FOUNDATION Fieldbus
2/57 SIMATIC PDM
© Siemens AG 2010