CALRAD

150

90-781 TEST LEAD SETFeatures 5 color-coded leads,terminated with wire hooks forhands free testing. 5 colors:black, green, red, white andyellow

RUBBER INSULATEDALLIGATOR CLIPSSturdy nickel plated jaws withstrong spring and hard bite. 11/2"long. Specify color. 90-765 ......................................Black90-766 ......................................Red

90-768 ALLIGATOR CLIPSKit of 5 alligator clips. Nickelplated with screw terminals. Alsofits banana plugs.

90-767 TEST CLIP SETThin wire kit of 10 leads, 15"long. Miniature insulatedalligator clip each end. (2 eachof 5 colors: black, green, red,white and yellow) #27 awgwire.

90-771 2 Black, 2 Red90-771-BK 2 Black90-771-RD 2 RedALLIGATOR CLIPS WITHINSULATED HANDLESInsulated alligator clips. Screwterminals. Also fits banana plugs.

90-764Same as 90-767, but withmedium weight clips and wire.Colors: black, green, red, whiteand yellow. #21 awg wire.

90-772 BATTERY CONNECTORSCompletely insulated, snap fastenertype with color-coded leads. Made to fitflat 9-volt and miniature 45-voltbatteries with 1/2" connector spacing.Available with 21/2", 4", 61/2", and 8"leads.90-772-2.5......................... 2.5” leads90-772-4............................ 4” leads90-772-6.5......................... 6.5” leads90-772-8............................ 8” leads90-772MMolded 9-volt battery clip with 6 “ leads.

90-770 HEAVY DUTY TEST CLIP LEADSHeavy duty, f lexible wire,insulated clips. Four 30" cables(Black, Green, Red andYellow). #18 awg wire.

SNAP-IN “AA” BATTERY HOLDERSSturdy, plastic, l ightweightconstruction. For use with radios,recorders, school projects andmany transistor applications. Willaccommodate 11/2-volt penlightbatteries.

90-773 2 cell holder (less batteries)90-774 4 cell holder (less batteries)90-775 2 cell holder (less batteries)90-777 8 cell holder (less batteries)90-779 4 cell holder (less batteries)

90-773

90-774

90-775

90-777

90-779

90 Series - Test Clip Leads, Alligator Clips & Battery Holders

CALRAD

151

90-782PANEL MOUNT FUSEHOLDERPanel mounting for 3AG-typefuses. Mounting hole size .59".19/32" long.Rating ....... 10 amps / 250 Vac

90-811 UNIVERSAL INLINE FUSE HOLDERConsists of insulated plasticfuse holder and 25"-wire.Handles 3AG-type fuses.Excellent for home, auto radiosand tape players. 18 gaugewire.

90-783-ULFUSE HOLDERUL VERSIONPanel mounting fuse holder for3AG fuses. Mounts in .59” hole.11/4" deep behind panel. Rating ....... 10 amps / 250 Vac90-783 NON-UL VERSION. 19/32" long. Mounts in .59” holeRating...................... 15 amps / 125 Vac

90-818 HEAVY DUTY INLINEFUSE HOLDER10-gauge wire with 30-Ampfuse included. Length is 13”.

90-838CB REPLACEMENTHARNESSFits many CB sets on themarket today. Complete withcolor-coded wire, fuse holderand 2-Amp fuse and moldedplug.

90-7514-PUSH TERMINALCONNECTORSPush terminal wire connecting block.2 red and 2 black push posts. Just atouch of the finger completes the circuit.Simple, yet positive action. Perfect foramplifier and speaker connections. Size: 211/16"(L) x 15/16"(W) x 5/8"(D)Mounting centers .................. 23/8”

90-755 2-PUSH TERMINALCONNECTORSPush terminal wire connectingblock. 1 red and 1 black pushposts. Dimensions......... 25/16"W x 1"HMounting Centers .......... 113/16"

HEAVY DUTY INLINE FUSEHOLDERS

ATC/ATO* blade type fuseholder. Length is 8”.90-731.............. 16-gauge wire90-732.............. 10-gauge wire* ® ATC/ATO is a registered trademark ofLittle Fuse Company.

“AAA” BATTERY HOLDERSMade of durable plastic shell andnickel plated contacts to stopcorrosion from battery acid. Allhave 6 inch leads (red and black).

90-745 .1 cell holder (less batteries)90-746 .2 cell holder (less batteries)90-747 .4 cell holder (less batteries)

90-745

90-746

90-747

90-780 SAFETY FUSE HOLDERPanel mounting for 3AG-typefuses. Fits in panels up to 3/16"thick, 19/32" mounting hole.Overall length 13/4" behind panel115/16". Rating ....... 10 amps / 250 Vac

90 Series - Battery & Fuse Holders, Speaker Terminals

CALRAD

152

90-740 SPEAKER TERMINAL CUP

21/4" x 21/4" square. Has springloaded connectors. Red andblack posts. Spade lug orsolderable rear terminals240 Vac @ 5 amps.

90-741 SPEAKER TERMINAL CUP21/2" x 31/8" size. Has springloaded connectors. Red andblack posts. Spade lug orsolderable rear terminals.

5-WAY BINDING POSTSPlastic insulation. Has 5/16" keyedthreaded mounting shaft. Willmount in panels up to 1/4" thick.Colors shown below. 90-799...............................Black90-800 .................................Red

90-730-BK Negative90-730-RD Positive

BATTERY POSTCONNECTOR

Gold plated battery postconnector for automotivebattery. Accepts 4 and 8 gaugewire.

90-735BATTERY RINGCONNECTOR

Gold plated ring terminal forconnecting to automotivebattery. Accepts 4 gauge wire.5/16” hole size.

90-798 RUBBER FEET

Black, non-marking semi-coneconstruction, countersunk screwheads. Size: 13/16" diameter (4 per pkg.)

90-756 PUSHBUTTON BINDINGPOST TERMINAL CUP

Ideal for fast connections. Springloaded. Just press and insertwires, release and wires aresecurely fastened. Installs easilyinto most speaker cabinets. Redand Black posts. Mounts in 2"hole, 25/16" dia. mounting centers.

90-757GAll Gold Terminal Version

Gold Plated Banana Plug &Binding Post Terminal Cup

All gold terminals. Red and BlackIdentification bands. Mounts in 2”hole. Mount ing holes 21/2”Center to Center. Outside FaceDiameter 27/8”.Mounting hardwarenot included.

90-757 Banana Plug & Binding Post

Terminal Cup.Gold terminals with plastic screwnut. Red and Black coloredplastic nuts. Mounting Holes 21/2”Center to Center. Mounts in 2”Hole. Outside Face Dia. 27/8”Mounting hardware not included.

90-758 Banana Plug & Binding

Post Terminal Stripgold terminals wi th p last icscrew nut with red and blackidentification bandsSize: 21/8” (L) X 15/16”(W)

90-758GAll Gold Terminal Version

Dual Banana/Speaker TerminalStrip. Accepts either standardbanana plugs or speaker wire upto 10 AWG. Solder, spade lug orscrew rear terminal optionsavailable. Size: 21/8” (L) X 15/16”(W).

90 Series - Speaker Terminals & Accessories

CALRAD

153

90-817 RUBBER FEET

Non-marking, semi-cone construc-tion and countersunk mountingscrews. Size: 9/16" dia. (4 per pkg.)

90-796RUBBER FEET

Adhesive-backed molded bum-pers apply instantly. Just peel offbacking and apply to any dry,clean surface. 4 per pkg.Dimensions... 0.400" Ht. x .880 dia.

90-797RUBBER FEET

Adhesive-backed molded bum-pers apply instantly. Just peel offbacking and apply to any dry,clean surface. 4 per pkg.Dimensions....0.320" Ht. x .635" dia.

90-794RUBBER FEET

Adhesive-backed molded bumpersapply instantly. Just peel off backingand apply to any dry, clean surface. 4per pkg.Size: 0.129"(H) x .520"(sq.)

90-795Same as 90-794 only larger.Size: 0.300"(H) x .880"(sq.)

90-819 HEAVY DUTY ALUMINUM

UTILITY BOXPrecision made. Ideal for mountingcontrols, intercom's and mosttransistor switching devices. Boxwall thickness .085”Size: 4.65”(L) X 3.65”(W) X 1.36”(H)

HANDY BOXES WITHALUMINUM PANEL

Made of sturdy black ABS plastic,removable aluminum cover. Perfectfor housing test equipment,experimental products. 90-784 ... 31/4"L x 21/8"W x 11/8"H90-785 ..... 4"L x 2 1/8"W x 15/8"H90-786 ...... 61/4"L x 33/4"W x 2"H

PLASTIC UTILITY BOXESSlotted for circuit boards. Graysturdy ABS plastic.90-880 ......2 1/8"L x 4 1/8"W x 1 3/4"H 90-881 ...... 2 1/2"L x 5 1/8"W x 1 3/4"H90-882 .......3 1/2"L x 5 7/8"W x 2 1/2"H90-883 ......41/2"L x 7 3/8"W x 2 9/16"H

90-936FLEXIBLE RATCHET DRIVER

SETComfortable ratchet wrench withflexible neck and ten inter-changeable tips. Flex neck isdetachable. Bits: 3 slotted, 4 phillips,3 torx.

90-935TWIN WRENCH DRIVER SETDual headed wrench with teninterchangeable tips. One wrenchis straight the other right angled.Bits: 3 slotted, 4 phillips, and 3torx.

90 Series - Rubber Feet, Chassis Boxes & Tools

90-940MAGNETIZERDEMAGNETIZERUsed to magnet ize ordemagnetize small handtoolssuch as screwdrivers, probesor needlenose plier tips.

CALRAD

154

90-8417-PIECE SLOTTED

SCREWDRIVER SETScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: .8-1.2-1.6-2.0-2.4-3.0-3.5 x 40mm

90-84722-PIECE SCREWDRIVER

AND TOOL SETHas interchangeable tips withslotted and phil l ipsscrewdrivers. Also hex nutwrenches and a flexible shaft.

90-807 METRIC 6-PIECE PLASTICINSULATED SLOTTED &

PHILLIPS SCREW-DRIVERSET

Contains: slotted; 1.0, 1.6, 2.4, and 3.0philips; 0 and 1.

90-8426-PIECE PHILLIPS

SCREWDRIVER SETScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: 0.5-0.4-0.3-0.2-0-1.2 x 40mm

90-8437-PIECE HEX BALL DRIVERSET WITH HARDENED TIPSScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: 0.7-0.9-1.3-1.5-2.0-2.5-3.0 x 40mm

90-8547-PIECE TORX DRIVER

SETScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: 05-06-07-08-09-10-15 x 40mm

90-802 11-PIECE SLOTTED &

PHILLIPS & SCREW-DRIVERSET

Contains 4 phillips, 5 slotted and 1magnet and 1 awl. Phillips sizes:#0-2, 0, 1. Slotted: 1mm, 1.2mm,1.4mm, 1.8mm, 2.4mm, 3.0mm,

90-806 METRIC 16-PIECE MULTI-

PURPOSE TOOL KITThis kit contains 6 blade screwdrivers(0.8 to 3.8 mm); 4 Phillipsscrewdrivers (2-No. 0 and 2-No. 1); 3Allen-type drivers (1.5, 2.0 & 2.5mm); 3 Hex nut drivers (3, 4 & 5 mm);plastic case.

90-93817 PIECE OFFSET RATCHET

& SOCKET DRIVER SET -American

Handy ratchet wrench with teninterchangeable tips or six sockets.Sockets are metric sizes. Sockets:3/16”, 7/32”, 1/4”, 5/16”, 11/32”, 3/8”. Bits: 3slotted, 4 phillips, 3 torx.

90-93717 PIECE OFFSET RATCHET

& SOCKET DRIVER SET -Metric

Handy ratchet wrench with teninterchangeable tips or six sockets.Sockets are in fractions of an inch.Sockets: 5, 6, 6.5, 8, 9, 10. Bits: 3slotted, 4 phillips, 3 torx.

90 Series - Tools

CALRAD

155

90-828 3-PIECE LONG-HANDLE

SCREWDRIVER SETScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: slotted;2.4x75, 3.0x100. phillips; 0-2x7.

90-859 6-PIECE LONG HANDLE

SCREWDRIVER SETScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: slotted;2.4x75, 3.0x100,4.0x150. phillips;0-2x7,0x100,1x150.

90-8447-PIECE COMBO SET

Screwdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection oflight, swivel top is suitable forminiature work. Contains: slotted;1.4 - 2.0 - 2.4 - 3.0 x 40mm &phillips’ 0.3 - 0.2 - 0 x 40mm

90-8468-PIECE SLOTTED

SCREWDRIVER SETScrewdrivers are made ofhardened and temperedmolybdemum steel. Black pointblades are against reflection ofl ight, swivel top is suitable forminiature work. Contains: slotted;1.4x40, 1.6x40, 2.0x40, 2.4x75,3.0x75. phillips; 0.2x75, 0.3x50,0x75.

90-8557-PIECE SLOTTED AND

PHILLIPS SETComes with magnifying lens,tweezers, and sharp probe.Contains: slotted; 1.0, 1.4, 2.0,2.4. phillips; 0.4, 0.3, 0.2.

90-910 3.2 x 75mm BLADESCREWDRIVER90-911 5 x 75mm BLADESCREWDRIVERAll above have easy-grip ergonomic handles.

90-941 20-IN-1 SCREWDRIVER

SETHinged storage handle, 19 types oftips includes: slotted, phillips, torx,metric sockets, 17.5” telescopingmagnetic pickup tool.

90-8406-PIECE NUT DRIVER SET

MetricIn plastic case. Contains: 3.0 x 20 mm, 3.5 x 20 mm, 4.0 x20mm, 4.5 x 20mm, 5 x 20mm.

90-942 20 PIECE SCREWDRIVER

SET6-1/4” hex driver socket type handlewith various tips, includes: slotted,phillips, torx, and hex ball.Complete with impact resistantcarrying case.

90 Series - Tools

90-915 3.2 x 75mm PHILLIPSSCREWDRIVER90-916 5 x 75mm PHILLIPSSCREWDRIVERAll above have easy-grip ergonomic handles.

CALRAD

156

90-934 5 INCH CURVED

FORCEPSStainless steel forceps withrubber coated grips.

90-930METRIC 7-PIECE FOLD-UP

HEX KEY SETContains: 1.3mm, 1.5mm, 2mm,2.5mm, 3mm, 4mm, 5mm.Finish: case painted in greenlacquered finish. Key fingerssand blasted and then nickelplated.

90-930AAMERICAN 7-PIECE

FOLD-UP HEX KEY SETContains: 1/16”, 5/64”, 3/32”,1/8”, 5/32”, 3/16”, 1/4”. Finish:case painted in green lacqueredfinish. Key fingers sand blastedand then nickel plated.

90-93130-PIECE AMERICAN/METRIC HEX KEY SET

Fold-up case. Long arm design in inches.Short arm design in metric. Contains: 15pieces; 3/8”, 5/16”, 1/4”, 7/32”, 3/16”, 5/32”,9/64”, 1/8”, 7/64”, 3/32”, 5/64”, 1/16”, 0.050”,0.028”. 15-pieces; 10mm, 8mm, 7mm,6mm, 5.5mm, 5mm, 4.5mm, 4mm, 3mm,2.5mm, 2mm, 1.5mm, 1.3mm, 0.9mm,0.7mm.

90-9335 INCH STRAIGHT

FORCEPSStainless steel forceps withrubber coated grips.

90-909 7-PIECE AMERICAN

STANDARD HEX KEY ANDBALL SET WITH HOLDER

Sizes: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”,5/16, 3/8”.

90-9089-PIECE METRIC HEX

KEYS SET WITH HOLDERSizes: 1.5mm, 2mm, 2.5mm,3mm, 4mm, 5mm, 6mm, 8mm,10mm.

90-9055-PIECE NEEDLE FILE

SET5 style edges: f lat, round,square, half-round, and triangle.

90-9064-PIECE PRECISION

TWEEZER SETFine sharp point, curved tip,general point tip, and flat tip.Comes with carrying pouch.

90-839 7-PIECE METRIC HEX NUT

DRIVER SETRubber handle grips with vinylpouch. Contains: 3mm, 3.5mm,4mm, 4.5mm, 5mm, 5.5mm, 6mm.65mm shaft length.

90 Series - Tools

CALRAD

157

90-9124 PIECE CERAMIC NON

CONDUCTIVE TWEEZER SETIdeal for handling semiconductors,silicon chips and delicate wafers. Staticdissipative and conductive ideal for usewith sensitive components where ESDdamage is a concern. Tweezers aremanufactured with carbon loadedmaterials. 4 blade types: duck bill, wideduck bill, 60° fine tip, and straight finetip. Heat resistant up to 180°C (250°F),Acid resistance. tips do not spreadunder pressure. No contamination andnon magnetic. Overall length 4.75”.

90-849 MICRO BENT NOSE PLIER

90-850MICRO FLAT NOSE PLIER

90-851MICRO CUTTING NIPPER

90-852MICRO ROUND NOSE

PLIER

90-853MICRO LONG NOSE PLIER

90-902 POCKET STYLE BUTANE

SOLDERING TOOLComes with two tips - a torchand a pointed tip. Cap with built-in lighter. Length: 6” Diameter:.75”

90-927-890-927-12

BNC INSERTION ANDREMOVAL TOOLS

Easy grip handle. Available in 8”and 12” shaft lengths.

90-928-8COAX CABLE ASSEMBLY

TOOLThis tool is used to remove ‘F’connectors in tight areas. Alsoaids in the assembly of standard‘F’ ser ies connectors wi th afemale mounted connector topush against. also used to cleardamaged or stripped threads.

90-803 3 PIECE PRECISIONALIGNMENT TOOLS

Insulated handles with steel tips.Antistatic nylon construction.

90-80410 PIECE PLASTIC

ALIGNMENT TOOLS4.5” long molded plastic rods withvarious types of tips: slotted,hexagon, and square. Easy griphandles.

90-921 AC SOLDERING IRON

30 watt pencil style. 6’ cord.

90-922 REPLACEMENT TIP

Replacement tip for 90-921.

90-903 BUTANE GAS TORCH WITH

CERAMIC HEADComes with different tips for allstyles of work. Unit is refillable.Five different tips are included.

90 Series - Tools

CALRAD

158

90-925 SOLDERING IRON STAND

WITH SPONGEWorks with Calrad solderingirons 90-921, 90-923, and otherAC irons.

90-900 TEMP-CONTROLLED

SOLDERING STATIONThis electronic temperature control solderingstation uses a sophisticated electronic circuitenabling the user to change the temperaturefrom 300°F (150°C) to 900°F (480°C) withoutchanging the t ip or heating element.Temperature is maintained within ±10°F of itspreset temperature by a unique temperaturesensor located near the tip giving rapidresponse and little temperature variation.Soldering station has a digital readout.90-900T Replacement tip for 90-900.90-900R Soldering iron replacement.

90-926 60/40 ROSIN

CORE SOLDER370 degree me l t i ng po in t ,18 awg, 7 i nch d i spensertube.

90-9042-PIECE SOLDERING AID

PROBE KITOne with right angle tip and theother straight. Useful in scrapingflux, glue, and micro positioning.Overall length 6”.

90-879TELESCOPIC INSPECTION

MIRRORAll angle ball joint mirror with stainlesssteel mirror backs. Allows visualinspection of hidden areas. Double balljoint l ink that swivels the mirror forviewing 360°. Made of tempered springsteel to move more freely and hold adesired position. Telescopic handle withvinyl grip. Mirror size: 2” x 1”, overallhandle length: adjustable 8.6” x 15”.

90-848 AUTOMATIC WIRE

STRIPPER/ TERMINALCRIMPER 10-26 AWG

90-857 SELF-ADJUSTING

CUTTER-STRIPPER2-in-1 cutter/wire stripper with self-adjusting mechanism providingprecise wire stripping withoutdamaging the conductor. Easy-to-use adjustable wire stop guaranteesconsistent strip lengths. Adjustmentdial sets blade pressure to thicknessof the insulation. Prepares wires.5mm2 to 8mm2

90-805CABLE SLITTING TOOL

Easy grip handle, adjustable cuttingblade. Prepares cables up to 1.75”.This tool can cut around or slit thelength of the cable jacket.

90-920 RATCHET CRIMPING

TOOLDesigned to produce a solid anduniform crimp with every use.Crimps spade type connectors from.5-1mm2, 1.5-2.5mm2, 4.0-6mm2.Handles cable sizes from 10 to 22gauge wire. Comfortable plastic grip.

90-900R

90-923 AC SOLDERING IRON

40 watt pencil style. 6’ cord.

90-924 REPLACEMENT TIP

Replacement tip for 90-923.

90 Series - Tools

CALRAD

159

90-856PRECISION WORK

HOLDER WITH 1.75”MAGNIFYING GLASS

Adjustable heads with 6 balljoints for all angles, locks at anyangle. Alligator spring clips foreasy use. Nickel plated fittingswith heavy cast-iron base.

90-787 HIGH INSULATION

ELECTRICAL TAPE Plastic electrical tape consists of highdielectric strength and flexible stretch,snug wrap, waterproof. Will resist oil,gasoline, water, salt water, alkalis andsunlight. 3/4" wide, 60 ft. UL approved.Please specify color whenordering90-787 .................................Black90-787-BU.............................Blue90-787-GN..........................Green90-787-WH ..........................White

90-602 POWER CORD EXTENSION

"Y" ADAPTER POWERCABLE

Enables two 12 volt units to beconnected to one 12 volt battery pack orauto accessory outlet. Includesreplaceable 3 amp fuse. Rated up to 15amps. 18 awg cable. Black cable.

DRILL BITS1/4”

99-F12F . . . . . 1/4" x 12” Flex Shaft99-F18F . . . . . 1/4" x 18” Flex Shaft99-F24F . . . . . 1/4" x 24” Flex Shaft99-F36F . . . . . 1/4" x 36” Flex Shaft99-F58F . . . . . 1/4" x 58” Flex Shaft99-F72F . . . . . 1/4" x 72” Flex Shaft

1/2”99-1218B . . . . 1/2" x 18” Stiff Shaft99-1218C . . . 1/2" x 18” Carbide Bit99-1218F . . . . 1/2" x 18” Flex Shaft99-1224F . . . . 1/2" x 24” Flex Shaft99-1224B . . . . 1/2" x 24” Stiff Shaft99-1236F . . . . 1/2" x 36” Flex Shaft99-1236B . . . . 1/2" x 36” Stiff Shaft99-1236C . 1/2" x 36” Masonary Bit99-1258F . . . . 1/2" x 58” Flex Shaft99-1258B . . . . 1/2" x 58” Stiff Shaft99-1272F . . . . 1/2" x 72” Flex Shaft

3/8”99-3812B . . . . 3/8” x 12” Stiff Shaft99-3812F . . . . 3/8” x 12” Flex Shaft99-3818B . . . . 3/8” x 18” Stiff Shaft99-3818C . . . 3/8” x 18” Carbide Bit99-3818F . . . . 3/8” x 18” Flex Shaft99-3824F . . . . 3/8” x 24” Flex Shaft99-3824B . . . . 3/8” x 24” Stiff Shaft99-3824C . . . 3/8” x 24” Carbide Bit99-3836F . . . . 3/8” x 36” Flex Shaft99-3836B . . . . 3/8” x 36” Stiff Shaft99-3836C . 3/8” x 36” Masonary Bit99-3848B . . . . 3/8” x 48” Stiff Shaft99-3858F . . . . 3/8” x 58” Flex Shaft99-H3858F 3/8" x 58” Flex w/ extra hole99-3872F . . . . 3/8" x 72” Flex Shaft

3/4”99-7548B . . . . 3/4” x 48” Stiff Shaft

Auger Bits99-A10036B 1” x 36” Flex Shaft, Auger99-A10048B . . . . . . . 1” x 48” Auger99-A1224B . . . . . . 1/2” x 24” Auger99-A1236B . . . . . . 1/2” x 36” Auger99-A1248B . . . . . . 1/2” x 48” Auger99-A3424B . 3/4” x 24” Stiff Shaft, Auger99-A3436B . . . . . . 3/4” x 36” Auger99-A3448B . . . . . . 3/4” x 48” Auger99-A3472B . . . . . . 3/4” x 72” Auger99-A3824B . . . . . . 3/8” x 24” Auger99-A3836B . . . . . . 3/8” x 36” Auger99-A3848B . . . . . . 3/8” x 48” Auger99-A3872B . . . . . . 3/8” x 72” Auger99-A5836B . . . . . . 5/8” x 36” Auger99-A5848B . . . . . . 5/8” x 48” Auger

All drill bits have the holeat the end of the shaft forfeeding wires thru thewall or window sill.

90 & 99 Series - Tools, Tape & Cigarette Lighter Plugs

90-604CIGARETTE LIGHTER PLUG

Snap-together case with singlescrew nut for fast easyreplacement. Easy accesssolderless terminals. Single fingerground system. Accepts up to 18awg cable. Over all length: 2.86”.Spring loaded tip.

90-601 CIGARETTE LIGHTER

JACKCigarette lighter jack for autoaccessories. Rated up to 15amps. Accepts up to .25” O.D.cable. Over all length: 2.7”.

90-600CIGARETTE LIGHTER

SOCKETChassis mount version mountsin 7/8" diameter hole. Over alllength: 2.64”. 0.15” diameterpost and 0.25” spade.Currentrating 15A.

CALRAD

160

90-610CIGARETTE LIGHTER

PLUG Snap-together case with singlescrew nut for fast easyreplacement. Easy accesssolderless terminals. Singlefinger ground system. Acceptsup to 16 awg cable. Over alllength: 2.86”. Spring loaded tip.

90-611CIGARETTE LIGHTER

PLUG 2-ear version for better groundconnection. Fuse protected,complete with 5 amp fuse.Accepts up to .25” O.D. cable.Over all length: 3.3”. Rubberstrain relief. Color black.

90-612CIGARETTE LIGHTER

PLUG2-ear version for better groundconnection, bakelite material.Accepts up to .25” O.D. cable.Over all length: 3”. No fuseprotection. Spring loaded tip.

90-613CIGARETTE LIGHTER

PLUGFuse protected, complete with 5amp fuse. 2-ear version forbetter ground. Accepts up to.17” O.D. cable. Over all length:3.7”. Rubber strain relief. Colorblack. Spring loaded tip.

90-606 CIGARETTE LIGHTER

PLUGFits most automotive lightersockets. 3 amp / 3 AG fuse. 18awg zip cable - red/black. 16”leads and fused plug.

90 Series -

90-615CIGARETTE LIGHTER

PLUG2-ear version for better groundconnection. Easy grip handle forremoval. O.D.: 0.25”. Overalllength: 3.7”. Rubber strain relief.Color black. Spring loaded tip.

90-616RIGHT ANGLE CIGARETTE

LIGHTER PLUGAccepts 18-22 gauge wire.Fuse protected with a 2A fuse.2 ear ground system and cablestrain relief. O.D.: 0.25”Overall length: 2.7”

90-620ADJUSTABLE CIGARETTELIGHTER PLUG W/ SWITCHRatchet style cigarette lighter plugwith built-in illuminated (L.E.D.)power switch. 10A fuse protected(fuse included). 2 finger groundsystem. 95° adjustable head.Accepts up to 16awg. cable.

90-614 CIGARETTE LIGHTERPLUG W/ RED L.E.D.

Same as 90-613 with LED forpower indication. O.D.: 0.19”Overall length: 3.8”. Rubberstrain relief. Color black. Springloaded tip.

90-617CIGARETTE LIGHTER

PLUG WITH 20 AMP FUSEHeavy Duty cigarette plug witha 20 Amp fuse. Dual contactsand heavy duty spring.

Cigarette Lighter Plugs, Jacks & Cable Assemblies

CALRAD

161

90-618CIGARETTE LIGHTER CABLE

WITH 2.1mm COAX PLUG 6’ 20awg. black cable with 2.1mm malecoax plug to male 5A fuse protectedcigarette l ighter plug with powerindicator L.E.D. for use with all typesof portable electronics requiring 12Vdc.

90-619CIGARETTE LIGHTER CABLE

WITH 2.5mm COAX PLUG6’ 20awg. black cable with 2.5mmmale coax plug to male 5A fuseprotected cigarette lighter plug withpower indicator L.E.D. for use with alltypes of portable electronics requiring12Vdc.

45-821 LIGHTER PLUGFused l ighter plug with LEDindicator. 6 ft. cord with 2.1 coaxplug on the other end. Fuseprotected at 5 amps. With positivecenter.

45-820 LIGHTER PLUGFused l ighter plug with 6detachable plugs. 12 ft. coiled cordwith multi plugs on the other end.Fuse protected at 2 amps.

90 Series - Cigarette Lighter Cable Assemblies

90-617-6CIGARETTE LIGHTER

PLUG WITH 20 AMP FUSE6’ 16 awg. black cable with strippedand tinned ends. Heavy dute 20Afuse protected cigarette lighter plugwith power indicator L.E.D. Dual earcontacts and heavy duty tip spring.For use with all types of portableelectronics requiring 12Vdc.

90-605 15 AMP CIGARETTE

LIGHTER PLUG WITHRETRACTABLE CABLE

Black, heavy duty 18 AWG coiled cable.Extends to 15 ft. Fits most automotivelighter sockets. Adds portability to yourelectronic equipment either inside oroutside of vehicle. 3 amp fuse. rated upto 15 amps. Black cable. Stripped andtinned leads.

90-607 CIGARETTE LIGHTER PLUG

WITH CABLEFits most automotive lightersockets. 32” black 18awg.cable. No fuse protection.

90-608 3AMP RIGHT ANGLECIGARETTE LIGHTERPLUG WITH CABLE

Right angle low profile cigarettelighter plug with 2-ear groundingsystem for stability and solidelectrical connections. 3A/3AGfuse protected. 16”, 18awg. cablewith a black PVC jacket.

CALRAD

162

90-895 REUSABLE 5-INCH CABLE TIE

90-896 REUSABLE 8-INCH CABLE TIE

CABLE TIE PRODUCTSThese tie products are manufactured of 100% non-corrosive, Type 6/6 Nylon. They meet MIL-S-23190, MS 3367, ASTM D4066-82, and are recognized under the component program of theUnderwriter's Laboratories, Inc. (File No. E 37800). All products are Self-Extinguishing UL 94Flam., Class: V-2. They are stocked in natural and weather-resistant, heat-stabilized black.Other colors are available upon request as noted on illustrations. The part numbers shown arefor bulk-packaged, natural ties. Order other colors by adding color desired to part numbershown. All cable ties sold in lots of 25, 100 or 1000 except part numbers 90-861, 90-862, 90-865, 90-866, 90-895, 90-896 which are sold in lots of 25, 100, 500.

90-830*

90-831***

90-832**

90-833**

90-860****

90-861**

90-862**

90-863*

90-864*

Minimum Bundle DiameterLoop Tensile Overall

Part Cross Strength Minimum Maximum Military LengthNumber Section lbs. (kg) in. (mm) in. (mm) Standard in. (mm)

90-830 * STD 18 (8.1) 3/16” (4.7) 7/8 (22.2) MS 3368-5 4.0 (101.6)90-831 *** MIN 18 (8.1) 1/16” (1.6) 7/8 (22.2) MS3367-4 4.0 (101.6)90-832 ** INT 40 (18.1) 1/16” (1.6) 11/4 (31.7) MS3367-5 5.5 (139.7)90-833 ** STD 50 (22.7) 1/16” (1.6) 13/4 (44.5) MS3367-1 7.5 (190.5)90-860 *** INT 40 (18.1) 1/16” (1.6) 21/8 (53.9) No App. Std 8.0 (203.2)90-861 ** STD 50 (22.7) 1/16” (1.6) 3 (76.2) MS3367-7 11.0 (279.4)90-862 ** STD 50 (22.7) 1/16” (1.6) 4 (101.6) MS3367-2 14.0 (381.0)90-863 ** STD 50 (22.7) 1/16” (1.6) 13/4 (44.5) No App. Std 8.0 (203.2)90-863-11** STD 50 (22.7) 1/16” (1.6) 3 (76) No App. Std 11.0 (282.0)90-863-14** STD 50 (22.7) 1/16” (1.6) 4 (102) No App. Std 14.0 (365.0)90-864 * STD 50 (22.7) 3/8” (9.5) 13/4 (44.5) MS3368-1 7.5 (190.5)90-869 ** 175 (79.3) 3/16” (9.5) 7.2 (184) No App. Std 24.0 (612.0)90-870 ** 175 (79.3) 23/4” (9.5) 103/4 (273) No App. Std 36.0 (914.0)90-872 175 (79) 3)3/16” (9.5) 15 (375) No App. Std 48.0 (1216)90-895 ** 50 (22.7) 1/8” (9.5) 11/4 (32) No App. Std 5.9 (150.0)90-896 ** 50 (22.7) 1/8” (9.5) 2 (51) No App. Std 7.8 (198.0)

* Available in Natural.** Available in Natural and Black.*** Available in Natural, Black, Red, Orange, Yellow, Green, Blue, Purple, Brown, and Gray.

90 Series - Cable Ties

For New ProductInformation Please VisitUs at: www.calrad.com

CALRAD

163

CABLE TIE MOUNTSSupplied with two mounts per peel-off strip, for faster separation from backing. Made of high-impactType 6 Nylon providing high tensile strength. Four-way insertion feature speeds assembly, sinceties slide easily into mounts from any of the four sides. The 1", adhesive-backed mounts have aload carrying capability of 0.5 lbs, while the 3/4" mounts are rated at 0.25 lbs. Mount Application:Steel/aluminum, glass/ceramics, painted surfaces, rigid vinyl, plasticized vinyl, polystyrene. Sold inbags of 25, 100, 500 and 1000 pieces.90-865 ...................................................... 3/4" 90-866 ........................................................ 1"90-865-BK ...................................... 3/4" Black 90-866-BK........................................ 1" Black..........................................................................................................................................................................

Initial Ultimate..........................................................................................................................................................................Peel Strength Medium Very HighRelative Shear Strength Very HighRelative Solvent Resistance High..........................................................................................................................................................................

Continuous Intermittent..........................................................................................................................................................................Temperature Performance 225°F 375°F..........................................................................................................................................................................

90-867A CABLE TIE INSTALLATION TOOL

Designed to combine maximum productivity and speed with operator comfort and safety.Simple to use - place tie around bundle and pull hand tight. Apply tool at head of tie andsqueeze. Tie is pulled to pre-set tension and cut off in one simple operation. Adjustable, pre-set tension results in uniform cable tie application, neater bundles more efficient harnessing.Replacement cutting blades available for extended life. Short squeeze factor for greatercomfort with less fatigue. Lightweight, only 12 ounces. Hand contoured handle. Positivepositioning feature on tension adjustment knob.

90-868 CABLE TIE TENSION TOOL

SPLIT AND SOLID WIRE CONDUITSplit or Solid PVC, Corrugated Tubing ProtectsWiring from Abrasion and Sunlight. Organizes Wireand Eliminates Clutter. Split Allows for Easy WireInsertion, While the Solid Insures Secure BlindInsertion.1/2” to 1” Split Conduit90-630-BK ...................................... 100 ft.1/2” Black90-630-GY ...................................... 100 ft. 1/2” Grey90-631-BK ...................................... 100 ft. 3/4” Black90-631-GY ...................................... 100 ft. 3/4” Grey90-632-BK ...................................... 50 ft. 1.0” Black90-632-GY ...................................... 50 ft. 1.0” GreySolid 2 Inch Conduit90-635-BK ...................................... 50 ft. 2.0” Black

90-630

90-631

90-632

90 Series - Cable Tie Accessories & Wire Conduit

90-635

CALRAD

164

90-6978 POSITION L.E.D. LAMP

Flexible 12" gooseneck with sturdy removable base assembly. Over 50 year average lamp life.Smooth adjustable brightness control with precise regulation circuitry. L.E.D lamps produce purewhite light for easy reading, the lamp assemply never gets hot. Perfect for A\V Mixing Consoles,orany area that needs Illumination. Detachable 9V power supply for easy wire routing. Inludes velcrowtape for easy mounting, DC power supply, free standing base. Features:Flexible 12" gooseneckRemovable table top & Fixed base assembliesOver 50 year Avg. L.E.D lamp lifeSmooth Adjustable Brightness ControlPure white light for easy readingLamp Assembly never gets hotSolid State L.E.D’S with regulation circiuitry for accurate and trouble free operation.Detacheable Power Supply for easy wire routing, Polarity sensative (+), (-) connectors.Inline Male\Female connector for easy cable routing. Polarity type connector (+), (-)

Specifications:Power.................................................................. 9 Vdc Lamp Life Avg ...................................... over 50 years.Current Draw Max............................................. 250mA Power Supply 9Vdc, 300mA, CALRAD 45-757S includedPower output .................................................... 4 Watts Standard Base Assembly Size L- 4.750" x W- 2" x H- 1.5"Cable Length ............................................................. 6’ Lamp Assembly Color ........................................ BlackLarge Removable Base Assembly Size L- 5" x W- 2-5" taper x H- .75"Readable Viewing Area 12 " x 12", L.E.D Output Angle 20° x 8 L.E.D’S

90-697-PMB PERMANENT MOUNT BASEBracket for permanately mounting the 90-697 to a flat surface. Includes allhardware.

90-699-XLR90-700-BNC

Perfect for mixing consoles or desk top, publicaddress usage. Gooseneck length 12".Terminates to a male XLR or BNC connector.Over 50 year Avg. L.E.D lamp life. Materialcolor: BlackSpecifications:Power ..................8 L.E.D lamps operates on 12Vdc.Current consumption .....................................250mA.Gooseneck length.................................................12"(90-699-XLR) Wiring XLR Pin 1=ground, Pin 2=12Vdc(90-700-BNC) Wiring BNC shield=ground, center pin 2=12VdcMaterial color.....................................................Black

90-702For use in Car's truck's. Provides a brightpure white light for reading. Never getshot, easy to handle and operate.Terminates to a male cigarette lighterconnector with ON/OFF switch. Over 50year Avg. L.E.D lamp life.Fuse protected.Specifications:Power 8 L.E.D lamps operates on 12Vdc.Current consumption ...................250mA.Gooseneck length...............................12"Material color...................................Black

90-701-XLR-RAPerfect for mixing consoles or desk top,public address usage. Terminates to amale XLR connector. Over 50 year Avg.L.E.D lamp life. Material color: Black.

Specifications:Power 8 L.E.D lamps operates on 12Vdc.Current consumption ...................250mA.Gooseneck length...............................12"Wiring. XLR Pin 1=ground, Pin 2=12VdcMaterial color...................................Black

90-1000 PERSONAL L.E.D SAFETY

LIGHTWith the mini-flash unit on atnight, you wil l stay visible tomotorists while walking or joggingon the road. Clip the mini -flasheither on your hat or clothes.Momentary push on\off powerswitch. Bright flashing red L.E.D. .Easy to replace 3V lithium batteryCR2032.

90-1000-BAT3V lithium replacement batteryCR2302.

90-697-PMB

90-750-BL (Blue)90-750-GN (Green)90-750-RD (Red)90-750-WH (White)MICRO LIGHT L.E.D. FLASHLIGHTOver 100,000 hours of bulb life, includes two 3V lithium batteries.Durable case with keychain ring. Shock and water resistant design.Push button for momentary operation or mini ON/OFF switch. Availablein 5 different colors. This unit will provide many years of trouble freeoperation.

90-750-BAT3V lithium battery for 90-750, two required.

Momentary Button

ON/OFF Switch

Durable PlasticOpening,

Difficult to Break

90 Series - L.E.D. Lamps