6th International Conference-Workshop

CCoommppaattiibbiilliittyy aanndd PPoowweerr EElleeccttrroonniiccss May 20 - 22, 2009

http://peandes.unex.es/cpe2009

Organized by

University of Extremadura Badajoz, Spain

Gdynia Maritime University Gdynia, Poland

with collaboration of

Honorary Chairman Juan Francisco Duque Carrillo Rector of the University of Extremadura (Spain)

General Chairmen Enrique Romero Cadaval University of Extremadura (Spain) Ryszard Strzelecki Gdynia Maritime University (Poland)

Technical Program Co-Chairs Fermín Barrero González University of Extremadura (Spain) María Isabel Milanés Montero University of Extremadura (Spain) Marek Hartman Gdynia Maritime University (Poland) Antoni Arias Polytechnic University of Catalonia (Spain) Juhan Laugis Tallinn Technical University (Estonia)

Organization Committee Eva González Romera University of Extremadura (Spain) Alfredo Álvarez García University of Extremadura (Spain) Víctor Miñambres Marcos University of Extremadura (Spain) Daniel Wojciechowski Gdynia Maritime University (Poland) Marek Adamowicz Gdynia Maritime University (Poland)

Deadlines 15/10/2008 Submission of full papers.

15/01/2009 Paper acceptance notification.

15/03/2009 Final date for early fee and for submission of final version papers.

30/04/2009 Final date for fee. Contact

CPE 2009 Office Eva González Romera School of Industrial Engineering University of Extremadura Avda. de Elvas, s/n. 06071 Badajoz (Spain) Phone: +34.924289647 FAX: +34.924289601

cpe2009@peandes.unex.es

Invitation

In the field of electrical engineering, power electronics is being dynamically developed. It is being applied in many industrial branches. Many production technologies became more efficient, when applying power electronics equipment. Power electronics and energy systems integration provide high standards of man friendly environment. The next generation of power electronics systems must change environmental factors, customer concerns and reliability. Conference-Workshop CPE 2009 will be an international wide forum for researchers, practitioners and postgraduate students to exchange new ideas and experiences in the area of power electronics application to different systems.

Distinguished lectures Power Electronics for Renewable Sea Wave Energy Given by Prof. Dr. Marian P. Kazmierkowski. Director of the Institute of Control and Industrial Electronics of the Warsaw University of Technology.

http://www.isep.pw.edu.pl/ICG/english/people/mpkazmierkowski.html Advanced Power Electronics Interfaces for More-Electric Aircraft Power Systems Given by Prof. Dr. Johann Walter Kolar, Director of the Power Electronic Systems Laboratory of the ETH Zurich.

http://www.pes.ee.ethz.ch/en/general-information/people/professor.html Large-Scale FACTS (up to 50 MW) Integration into the Spanish Power System for Wind Power Applications Given by Eng. Manuel Visier Guixot, Director of WINDFACT Project (by ENERTRON – GAMESA) and Partner-Director of Windsun Consulting. Topics CT1: Power Quality, Alternative Energy and Distributed Systems General power quality problems and measurements. Distribution networks. Distributed generation. Reliability and economics. Hybrid energy systems. Energy storages. Fuel cell. Renewable energy sources. CT2: Power Electronics Controllers for Power Systems FACTS and HVDC. Grid interfaces. Filters and compensators. Custom power devices. UPS. Active power quality controllers. Voltage restorers. UPQC. CT3: Electro-Mechanical Energy Conversion Unconventional motors and generators. Motor drives. Variable and constant speed generators. Power electronics converters for drives and generators. Motion control. Modulation techniques. Energy saving and compatibility of electrical drives and generators. CT4: EMI and ESI Problems General problems. EMC standardization. Measurements and computation-property of the power electronics circuits. EMC improvement with new materials and elements, systems construction and protection. CT5: Special Power Electronic Systems and Applications Unconventional power electronics converters. Automotive vehicles. Aircraft. Ships. Military technology.

The above listed topics do not exclude submission and presentation of papers from other specific fields related to the general theme of the Workshop-Conference.

Technical Program Committee

João Luís Afonso Universidade do Minho (Portugal)

Josep Balcells Sendra Polytechnic University of Catalonia (Spain)

Andrés Barrado Bautista Universidad Carlos III de Madrid (Spain)

Grzegorz Benysek University of Zielona Góra (Poland)

Frede Blaabjerg Aalborg University (Denmark)

Mihail Cernat “Transilvania" University of Brasov (Romania)

Valery Chrisanov St. Petersburg State Telecommunication University (Russia)

Tadeusz Citko Bialystok University of Technology (Poland)

Jon C. Clare The University of Nottingham (United Kingdom)

Brayima Dakyo University of Lehavre (France)

Sergey Denysyuk National Technical University of Ukraine “KPI” (Ukraine)

Jesús Doval Gandoy Universidad de Vigo (Spain)

Ali Emadi Illinois Institute of Technology (USA)

Friedrich W. Fuchs University of Kiel (Germany)

Leopoldo G. Franquelo University of Sevilla (Spain)

Ilja Galkin Riga Technical University (Latvia)

Pablo García González Universidad Pontificia de Comillas (Spain)

Sergej Kalaschnikow Danfoss Gesellschaft mbH (Austria)

Marian-P. Kazmierkowski Warsaw University of Technology (Poland)

Marius Klytta Giessen-Friedberg University of Applied Science (Germany)

Wlodzimierz Koczara Warsaw University of Technology (Poland)

Johann W. Kolar Swiss Ferderal Institute of Technology Zurich (Switzerland)

Zbigniew Krzeminski Gdansk University of Technology (Poland)

Jorma Kyyrä Helsinki University of Technology (Finland)

Andreas Lindemann Otto-von-Guericke-Universität Magdeburg (Germany)

Marco Liserre Polytechnic of Bari (Italy)

Josef Lutz Chemnitz University of Technology (Germany)

Mariusz Malinowski Warsaw University of Technology (Poland)

António João Marques Cardoso Universidade de Coimbra (Portugal)

Salvador Martínez García Universidad Nacional de Educación a Distancia (Spain)

Luis Martínez Salamero Universidad Rovira i Virgili (Spain)

João Francisco A. Martins Universidade Nova de Lisboa (Portugal)

Juan Carlos Montaño Asquerino Consejo Superior de Investigaciones Científicas (Spain)

Antonio Moreno Muñoz University of Córdoba (Spain)

Adel Nasiri University of Wisconsin-Milwaukee (USA)

Josep Pou Polytechnic University of Catalonia (Spain)

Leonids Ribickis Riga Technical University (Latvia)

Detlef Schulz University of the Armed Forces Hamburg (Germany)

Andrzej Sikorski Bialystok University of Technology (Poland)

J. Fernando A. Silva Instituto Tecnico Superior de Lisboa (Portugal)

Paolo Tenti University of Padova (Italy)

Dimitri Vinnikov Tallinn University of Technology (Estonia)

Helmut Weiss University of Leoben (Austria)

Qing-Chang Zhong University of Liverpool (United Kingdom)

Valery Zhuikov National Technical University of Ukraine “KPI” (Ukraine)

Gennady Zinoviev Novosibirsk State Technical University (Russia)

Conference Location

The CPE 2009 Conference-Workshop will be held in Badajoz, a city in the southwest of Spain, in the Region of Extremadura that borders Portugal.

The best way to reach Badajoz is by airplane. Badajoz has a national airport with links with the international airports of Madrid, Barcelona and Bilbao. There will be free buses from the airport (about 15 km from the city center) to the recommended hotels in Badajoz.

It is possible to reach Badajoz by car on the highway, by bus or by train from Madrid (about 400 km), Sevilla (215 km) and Lisbon (Portugal, 225 km).

The conference will take place in IFEBA (www.ifeba.net), the trade fair institution of Badajoz.

General information

In accordance with the IEEE-IES Technical Co-sponsorship conditions papers should be accepted after a review process by three referees. Accepted papers will be presented in oral/dialoged sessions. Poster sessions are not scheduled. The technical program committee will ask the authors for improving their papers according to the reviewer’s recommendations. Initial submissions must be full papers. No abstracts will be reviewed. All submitted papers must be in Portable Document File (.pdf) IEEE Xplore compliant format. Instructions for typescript preparation are available on

the conference website: http://peandes.unex.es/cpe2009. The accepted papers will be published in the CD-Rom Workshop-Conference Proceedings and included in the IEEE Xplore database, only if at least

one author is registered using the registration form and has paid the registration fee. An award will be given for the best student paper per workshop topic.

Registration fee The registration fee includes the Workshop-Conference Proceedings CD-Rom, the three day lunches and coffee breaks, the

welcome party and the gala dinner.

Non IEEE Members IEEE Members* IES and PELS Members *

Early registration (before 15/03/2009) 375 € 325 € 300 € Normal registration (after 15/03/2009) 475 € 425 € 400 € Student registration* (before 15/03/2009) 250 € 215 € 200 €

* IEEE, IEEE-IES and IEEE-PELS Members must indicate their IEEE member number within registration process. Student must send a document from their universities that acreditates their student condition.

Updated information at http://peandes.unex.es/cpe2009