CALGARY 1 11 SASKA 1 11 1 - Maxquip

CALGARY 1-866-629-7847 EDMONTON 1-800-661-7770 SASKATOON 1-800-667-5886 1WINNIPEG 1-844-278-5771

DELIVERY10 600 USWG TANDEM

AMMONIATRAILERS

tandem axle10,600 USWG capacity verses industry standard 8000 USWG capacity

1 866 629 7847www.maxquip.ca

Lighter weight QT steel

DELIVERY12 600 USWG TRIDEM

AMMONIATRAILERS

88" diametera manageable length that pulls better and has a lower center of gravity

Manufactured by

Manufactured by

Our trailers come loaded with lots of standard features that are not-so-standard for others!

www.maxquip.ca

PROPANE?Serving the propane distribution industry’s needs for parts, storage components andsystems, transport, pump and metering of Liquified Petroleum Gas (LPG) has been

Maxquip’s core business since our company was founded over 15 years ago!

did someone say

visit maxquip.ca to download our propane catalog

NH3PROPERTIES

Very corrosive to living tissue,copper, copper alloys and

galvanized surfaces

EXPLOSIVELIMITS16% TO 25%VOLUME OF

VAPOURIN AIR

CORROSIVENESS

AUTO IGNITIONTEMPERATURE

651°C (1,204°F)

LIQUID WEIGHT

5.14 lbs. NH3 per USGor 4.22 lbs. N per USG

AFFINITY FOR WATER

VERY HIGH

BOILING POINT

-33.3°C (-28°F)

VISCOSITY

70°F: 0.0100 cP

COLOUR

COLOURLESS

SPECIFIC GRAVITY

0.62

ODOURPUNGENT

N

H

H

H

• 1 part nitrogen (82% by weight) to 3 parts hydrogen (18% by weight).• Is a gas unless cooled to minus 28 degrees Fahrenheit (-33.3 degrees Celsius) or is sufficiently compressed.• Approximately 840 parts vapour must be compressed to equal 1 part liquid at atmospheric condi�ons. At 100 psi, liquid to vapour ra�o is approximately 1:200.• Exposure to liquid or high concentra�ons of vapour can cause severe burns.• Excessive inhala�on may cause severe damage to the lungs or suffoca�on.• Classified by the Department of Transporta�on as a non-flammable compressed gas because igni�on condi�ons are extremely difficult to achieve under normal agricultural opera�ng condi�ons.• Its strong pungent odour will discourage a person from voluntarily remaining in a concentra�on which could be injurious.• The agent for controlling ammonia emergencies and the first aid treatment for exposure are the same: WATER and lots of it quickly!• NH3 gas is lighter than air and dissolves in water.• Is typically stored & transported as a liquid under pressure.

Anhydrous Ammonia (NH3) Facts

WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 OAKVILLE 1.800.801.8512 • MONTREAL 1.877.629.7847

5

helpful formulas

eamyTotal pounds nitrogen per hour (Lbs. N / Hour) = Implement �idth (�.) X �peed (M�H) X Rate per Acre (actual N) X 0.1212

tank capacityMaximum withdrawal rate from a NH3 nurse tank is 2% of tank capacityper minute, but will vary somewhat with temperatures of liquid andatmosphere and intake line restric�ons. �or example, a 1,000 gallon tankwill be limited to 20 gpm maximum withdrawal rate.

Plumbing Size Rates 1” Up to 3,600 Lbs. N / Hour

1 – ¼” Up to 6,000 Lbs. N / Hour 1 – ½” Over 6,000 Lbs. N/ Hour

Recommended Plumbing Nurse Tank to Meter or Cooler

Recommended Plumbing Nurse Tank to Maxflow VRC IIPlumbing Size Rates

1-1/4” Up to 3500 Lbs. N/Hour 1-1/2” Up to 6000 Lbs. N/Hour

2” 6000 Lbs. N/Hour and over

A properly designed feed line will minimi�e vapour forma�on by limi�ngline restric�ons and preven�ng vapour pocket forma�ons. �ince NH3 willhave a tendency to vapori�e, the intake piping plays a cri�cal role in theefficiency and longevity of every system. The following is a list ofconsidera�ons to ensure you have op�mal �ow rates�

• Inlet piping from tank to the metering system should be as short as possible.• Meter should be at a lower level than the tank’s lowest liquid level.• �se low restric�on type valves and ��ngs. �ong sweep radius bends are preferred.• Nearest ��ng or strainer should be at least 10 pipe diameters from the pump inlet.• Check and clean inlet strainers regularly.• Avoid up-across and down pipe loops where vapors can accumulate.

feed line plumbing considerations

traditionalmetering systemcapacities

Maximum Capacity at Various Tank Pressures (Lbs. N / Hour)

Meter 50 PSI 75 PSI 100 PSI �on�nenta� �-4103-6572 3000 3500 4000

�on�nenta� �-�500 4400 5300 6200 Raven Accuflow 1-1/4” 4000 5000 6000

Superflow 1-1/4” 6000 6500 7000

6 CALGARY 1-866-629-7847 EDMONTON 1-800-661-7770 SASKATOON 1-800-667-5886 WINNIPEG 1-844-278-5771

splitter capacity

eamy

manifold systemcapacities

Maxflow VRCMetering SystemCapacities

Maximum Pump Capacity a Various �i�eren�al Pressures (Lbs. N / Hour)

15 PSI 30 PSI 50 PSI 100 PSI MAX2A Pump 10,000 9,375 8,750 7,500 LGLD2 Pump 20,000 18,750 16,750 14,250

Maximum Capacity at Various Tank Pressures (LBS N / Hour)

50 PSI 75 PSI 100 PSI 3 �a� Spli�er

w/ Cooler 3000 3500 4000

4 �a� Spli�er w/ Cooler

4100 4800 5400


5100 6000 6800


10,560 12,540 13,860


10,560 12,540 13,860


10,560 12,540 13,860

Maximum Capacity at Various Manifold Pressures

(Lbs. N / Hour / Opener) Tradi�onal Cooler 50 PSI 75 PSI 100 PSI

*Manifold w/ ½” or 3/8” hose 105 – 145 120 – 165 140 – 190 Manifold w/ O.170 hose 77 88 100 Manifold w/ 0.125” hose 60 70 80 Manifold w/ 0.125” hose & 0.085 SS Tubes (15”)

48 55 62

Manifold w/ 0.085” hose 40 46 52 Maxflow VRC II

Manifold w/ O.170 hose 180 to 640 Manifold w/ 0.125” hose 125 to 350 Manifold w/ 0.085” hose 16 to 98 Manifold w/ 0.125” hose & 0.085 SS Tubes (15”)

30 to 180

Manifold w/ 0.125” hose & 0.055 SS Tubes (15”)

16 to 90

�ote� Manifold capaci�es are �ased on �5 �. hose len�ths� �ased on a 60” wide implement at5 MPH. *Depends on which cooler is put in front of the Manifold System

CALGARY 1-866-629-7847 EDMONTON 1-800-661-7770 SASKATOON 1-800-667-5886 7WINNIPEG 1-844-278-5771


nurse wagon edcnurse wagon edc

squibb-taylor electric

nurse wagon edc

cs air solutions

• Electric discharge control system for Anhydrous Ammonia Nurse Wagons.• �an �e �ired into �a�en N�� A��lica�on �its

Part Number Descrip�on

SQU P810 Actuator for Fisher ESV

SQU P810 - R Actuator for Rego ESV

SQU P810 -M Actuator for Marshal ESV


SQU C810 - F Actuator for Fisher 2"/3" ISC

SQU C810 - R2 Actuator for Rego 2" ISC

SQU C810 - R3 Actuator for Rego 3" ISC

• �neuma�c discharge control system for Anhydrous Ammonia Nurse Wagons.• �an �e �aired �ith any �neuma�c Actuated �� or E��


AIR BOX Complete Air Kit

AIR BOX HARDWARE KIT Hardware Kit

AIR BOX UNION 1/4 1/4" Union QL1362-4

AIR BOX HOSE BL Blue Hose Roll

ACTUATOR FOR ESV ACTUATOR FOR ISC


63

Prices All quotations are made for immediate acceptance unless otherwise stated. Prices are subject to change without notice. Prices are quoted FOB our ware-house exclusive of applicable taxes unless otherwise stated. We shall not be held responsible for any consular fees, fees for legalizing invoices, certificates of origin, stamping bills of lading, or other charges required by the laws of any country of destination, or any fines, penalties or interest imposed due to incorrect declarations.

PaymentWe accept cash, cheques, electronic fund transfers, MasterCard or Visa. Payment is due upon receipt of invoice. Late charge of 2% per month, which is an annual percentage of 24% may be assessed on all overdue accounts. Payment is due whether or not technical documentation and/or any third party certifi-cations are complete at the time of shipment. We will be entitled to recover all reasonable attorneys’ fees and other costs incurred in the collection of overdue accounts.

Credit LimitWith credit approval, you will be allowed to charge to an open account. We accept cash, cheque or electronic fund transfer only for payment of account. Your credit limit will be set according to the references listed on your credit application if you have not established credit. Your creditworthiness may be re-con-firmed from time to time at our sole discretion. We reserve the right, where a genuine doubt exists as to your financial position or if you are in default of any payment obligation, to suspend delivery or performance of any agreement or any part thereof without liability and without prejudice to, and without limita-tion of, any other remedy available to us until you cure the default or satisfactory security for payment has been provided. We will have the option to extend the delivery date by a time at least equal to the period of such suspension.

Damage/Shortage ClaimsAll goods are carefully packed and inspected prior to shipping. We will attempt to pack or prepare all shipments so that they will not break, rust or deterio-rate in shipment, but we do not guarantee against such damage. Check all goods immediately upon receipt. If goods are damaged in transit or shortages appear, it is your responsibility to file a claim with the delivery carrier. We accept no responsibility for any damage, shortage or loss in transit. Ownership and risk of loss passes to you upon the earlier of (a) our delivery of the goods, or (b) invoicing by us for the goods where you are unable to accept delivery on the scheduled date. We will retain a security interest in the goods until the purchase price has been paid, and you agree to perform upon request all acts required to secure our interest. Please note all damages and shortages on the freight bill before signing. All shortages must be reported within 24 hours after receipt of shipment or claim will be denied.

ShipmentsFees for carriers will be prepaid and invoiced to the customer, unless otherwise directed by the customer to use the customer’s own account with a specific carrier. Shipments made by bus lines and common courier will be collect unless otherwise specified. We do not ship via postal service. Unless otherwise agreed to by us in writing, delivery terms shall be EXW Maxquip’s premises (INCOTERMS 2010), except to the extent modified by this General Terms and Conditions. Where goods are to be supplied from stock, such supply is subject to availability of stocks at the date of delivery. Partial shipments may be made as agreed to between you and us. Stated delivery dates are approximate only and cannot be guaranteed. We will have no liability for damages arising out of the failure to keep a projected delivery date, irrespective of the length of the delay. In the event you are unable to accept delivery of goods when tendered, we may, at our option, arrange for storage of the goods at your sole risk and you will be liable to us for the reasonable cost of such storage. This provision is without prejudice to any other rights which we may have with respect to your failure to take delivery of goods, which includes the right to invoice you for the goods. You agree that title to the stored goods will transfer to you upon invoicing notwithstanding your inability to accept delivery and that you assume all risk of loss or damage to the goods from the date title passes to you. You are responsible for all shipping costs from our premises to the location as designat-ed by you. All shipping costs for the return of goods from the location specified by you to our premises will also be for your account.

Special OrdersOn special items we order that are not normal stock items, we cannot accept cancellations or returns in most cases. In certain cases (to be determined by Maxquip Inc. in its sole discretion) returns may be possible, subject to a restocking fee.

ReturnsNo returns will be accepted after 30 days. No material should be returned for credit without Maxquip’s approval. All freight charges must be prepaid on returned items, and all original prepaid freight charges must be paid in full. Goods returned must be accompanied by a Returned Goods Authorization (RGA) number and a copy of the original invoice. All shipped to Maxquip without prior authorization (RGA) will not be accepted and the item will be returned freight collect. Restocking charges will apply.

General Terms & Conditions

SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886

64

continued...

WarrantyWarranties as expressed by individual manufacturers will be honored. We will comply with all instructions given by the manufacturer in each given instance. All freight charges incurred on warrantable items are the customers responsibility. Please return warrantable/defective items to Maxquip Inc. within 30 days or the warranty will be void.

TaxesYou will be responsible for, and shall protect, indemnify, defend and save harmless, us from and against the reporting, filing and payment of any taxes, duties, charges, licenses, or fees (and any related fines, penalties or interest and the like) imposed directly on you in connection with the purchase of the goods and all liabilities, costs, and associated expenses (including lawyers’ and experts’ fees) which may be incurred in connection therewith. Such taxes, duties, charges, licenses, or fees include but are not limited to any local, state, federal, foreign, or international sales, use, value added tax (“VAT”), goods and services tax (“GST”), rental, import, export, personal property, stamp, excise and like taxes and duties. If we pay any such tax, you will, within thirty (30) days of our demand, reim-burse us for the tax including interest, fines, and penalties, paid by us. It will be your sole obligation after payment to us to challenge the applicability of any tax. Notwithstanding the foregoing, we will provide you with a copy of all exporting documents and any other documents reasonably requested by you to prove or substantiate to the appropriate tax authorities the goods were timely exported.

CooperationYou will cooperate with us, and at our request, you will use your best efforts to supply us such information (including documentary information) in connection with your activities as may be required by us for any of the following purposes:

a) to enable us to comply with the lawful demand or requirement for such information by any appropriate government authority or to en sure that all requirements of the applicable law are being complied with; b) to enable us to conduct, defend, negotiate or settle any claim arising out of, or in connection with, such activities, whether or not such claim shall have become the subject of arbitration or judicial proceedings; c) to enable us to make any application (including, but without limitation, any claim for any allowances or relief ) or representation in connection with, or to contest any assessment on, or our liability in connection with any taxes, duties, levies, charges and contributions (and any interest or penalties thereon); or d) to secure for us any beneficial tax treatment and legally minimize any tax obligations in connection with the sale of our goods.

Liabilities, Releases and IndemnificationFor purpose of this section, the following definitions will apply:

“Claims” shall mean all claims, demands, causes of action, liabilities, damages, judgments, fines, penalties, awards, losses, costs, expenses (including, without limitation, attorneys’ fees and costs of litigation) of any kind or character arising out of, or related to, the performance of or subject matter of this Agreement (including, without limitation, property loss or damage, personal or bodily injury, sickness, disease or death, loss of services and/or wages, or loss of consortium or society).

NOTWITHSTANDING ANYTHING CONTAINED IN THIS AGREEMENT TO THE CONTRARY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER AND EACH PARTY RELEAS-ES THE OTHER FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOST PRODUCTION, LOST REVENUE, LOST PRODUCT, LOST PROFIT, LOST BUSINESS OR BUSINESS OPPORTUNITIES.

Maxquip’s total liability for all claims, damages, causes of action, demands, indemnities, judgments, fines, penalties, awards, losses, costs and expenses(including attorney’s fees and cost of litigation) shall be limited to and shall not exceed the value of the goods purchased by the customer.

Maxquip shall not be liable for any claims, damages, causes of action, demands, indemnities, judgments, fines, penalties, awards, losses, costs and expenses (including attorney’s fees and cost of litigation) that may arise as a result of the customer’s use of the supplied equipment in a manner which such equipment is not adequately certified for. The customer is required to ensure appropriate certification for the equipment it intends to use and to confirm that such certifica-tion(s) are applicable for the jurisdiction in which the equipment is being used and have not expired, changed or otherwise materially been altered.

The customer acknowledges that the customer has selected the equipment and that Maxquip does not and will not make any representation or warranty, express or implied, with respect to the equipment or its adequacy for the customer’s purpose or otherwise. Except as expressly stated herein, Maxquip makes no other representation, warranty or condition with respect to the equipment and disclaims all other representations, warranties or conditions, express or implied, with respect to the merchantability or fitness for a particular purpose of the equipment.

THE EXCLUSIONS OF LIABILITY, RELEASES AND INDEMNITIES SET FORTH IN THIS SECTION SHALL APPLY TO ANY CLAIM(S), LOSSES OR DAMAGES WITHOUT REGARD TO THE CAUSE(S) THEREOF, INCLUDING BUT NOT LIMITED TO PRE-EXISTING CONDITIONS, WHETHER SUCH CONDITIONS BE PATENT OR LATENT, THE UN-SEAWORTHINESS OF ANY VESSEL OR VESSELS, IMPERFECTION OF MATERIAL, DEFECT OR FAILURE OF PRODUCTS OR EQUIPMENT, BREACH OF REPRESENTATION OR WARRANTY (EXPRESS OR IMPLIED), ULTRAHAZARDOUS ACTIVITY, STRICT LIABILITY, TORT, BREACH OF CONTRACT, BREACH OF DUTY (STATUTORY OR OTHER-WISE), BREACH OF ANY SAFETY REQUIREMENT OR REGULATION, OR THE NEGLIGENCE OR OTHER LEGAL FAULT OR RESPONSIBILITY OF ANY PERSON (INCLUDING THE INDEMNIFIED OR RELEASED PARTY), WHETHER SUCH NEGLIGENCE BE SOLE, JOINT OR CONCURRENT, ACTIVE OR PASSIVE.

Force MajeureIf either party is unable by reason of Force Majeure (as defined below) to carry out any of its obligations under this Agreement, other than the obligations to pay money when due and indemnification obligations assumed hereunder, then on such party giving notice and particulars in writing to the other party within a reasonable time after the occurrence of the cause relied upon, such obligations shall be suspended. “Force Majeure” shall include acts of God, laws andregulations, government action, war, civil disturbances, strikes and labor problems, delays of vendors, carriers, lightening, fire, flood, washout, storm, breakage or accident to equipment or machinery, shortage of raw materials, and any other causes that are not reasonably within the control of the party so affected. We will be paid our applicable standby rate, if any, during any such Force Majeure event.

SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886

66

TX & TXD seriessliding vane pumps

STX DEF series

TRANSPORT PUMPSFOR DIESEL EXHAUST

FLUID (DEF)

www.maxquip.ca

PUMPSPETROLEUM

WE ALSO OFFER:hand operated pumps

transport pumps for defsliding vane pumps

heavy duty sliding vane pumps

GNX & GNXH series

alignment free - heavy duty sliding vane pumps


67

TX & TXD seriessliding vane pumps

STX DEF series

TRANSPORT PUMPSFOR DIESEL EXHAUST

FLUID (DEF)

www.maxquip.ca

PUMPSPETROLEUM

WE ALSO OFFER:hand operated pumps

transport pumps for defsliding vane pumps

heavy duty sliding vane pumps

GNX & GNXH series

alignment free - heavy dutysliding vane pumps

CALGARY 1 11 SASKA 1 11 1 - Maxquip

Documents

Transcript of CALGARY 1 11 SASKA 1 11 1 - Maxquip