Cage Trailerdesign also includes handy features like tie-down hooks, double safety chains and...

Cage Trailer

This plan includes 3 handy sizes 7×4, 8×5 and 9x5ft with cage height of 1200mm (4ft). Drop down rear

ramp for ease of loading in a practical design that is inexpensive and easy to build. With max. ATM of

1500kg and TARE of only around 350kg, this trailer will give you up to 1150kg load carrying capacity.

3 Sizes included: 2100x1200mm (7×4ft), 2400x1500mm (8×5ft) or 2700x1500mm (9x5ft)

Max. ATM: 750 to 1500kg

TARE: ±350kg

Load Capacity: up to 1150kg

Chassis Construction: RHS ladder type construction

Suspension: Single Beam Axle & Leaf Springs

Box Body: RHS frame with weldmesh sheets, drop tailgate/ramp

Luggage Trailer

The Luggage Trailer is a multi-purpose single axle box trailer that is compact light and inexpensive to

fabricate. With a maximum GTM of 750kg, no brakes are required. There are 3 popular sizes all with

optional hard lid, roof racks and nose cone storage box. With a sealed lid and handy racks you can

move a stack of goods, even some longer bits. Keep anything that needs to stay dry and secure save in

the lockable box.

3 Sizes: 1500×900 (5x3ft), 1800×1200 (6x4ft) & 2100×1200 (7x4ft)

Overall Size: 1500×900 (5x3ft), 1800×1200 (6x4ft) & 2100×1200 (7x4ft)

Max. ATM: 900kg

Max. GTM: 750kg

TARE: ±370kg

Max. Load capacity: ±530kg

Chassis & Frame Construction: Channel, RHS & SHS (various sections)

Suspension: Single Axle & Leaf Springs

Features: Hard lid, sealed & secure, under-body spare wheel, light weight

Tandem Box Trailer

This plan is for a Tandem Box trailer with beam axle suspension and large box area in 3 popular sizes –

2400 × 1500 (8x5ft), 2700 × 1500 (9x5ft), 3000 × 1800 (10x6ft). The plan uses a tandem box body panel

kit available from most trailers spares suppliers and a strong RHS chassis construction.

3 Sizes: 2400×1500(8x5ft), 2700×1500 (9x5ft), 3000×1800 (10x6ft)

Max ATM: 2400kg

Tare: ±680kg (2700×1500)

Chassis Construction: steel RHS (various sections)

Suspension: Beam Axles & Leaf Springs

Options Included: Spare wheel mount, ladder racks, tie-down rails…

Box Trailer

A heavy duty single axle box trailer in 3 popular sizes (6×4, 7×4 and 7x5ft), a tried and tested design

that is strong and economical.

3 Sizes: 1800×1200(6x4ft), 2100x1200mm(7x4ft), 2100×1500(7x5ft)

Max. ATM: 750 to 2000kg

Tare: ±250kg

Chassis Construction: Various RHS sections


Box Body: Body Kit with drop tailgate

Options Included: Spare wheel bracket, tie-down rails, ladder racks…

4m Enclosed Motorbike Trailer

A medium size enclosed trailer with a load area of 4000x2000x1500 (about 13×6.5x5ft) and a

maximum ATM of 2600kg, suitable for moving anything from motorbikes, quads or, if needed, a

mate’s furniture. The enclosed trailer volume amounts to a very handy 12m³ (422ft³) and there is a

side door for quick access to the trailer. The rear door drops down to become a ramp for ease of

loading. Chassis and frame is RHS construction and enclosed panel material can either be steel, zinc

anneal, zinc aluminium, composite or suitable alternatives.

Enclosed Size LxWxH: 4000x2000x1500mm (±13×6½x5ft)

Overall Size LxWxH: 5618x2000x2043mm (±18½x6½x6½ft)

Internal width between wheel boxes: 1370mm

Max. ATM: 2600kg

TARE: ±1000kg


Chassis & Frame Construction: RHS & SHS (various sections)


Features: Rear door ramp, side access door, wheel chocks, tie-downs, finishing trim for a sealing

and a professional look

2.1m Enclosed Trailer

A 2100x1200mm (7x4ft) box style trailer with enclosed sides and rear door 1400mm (4½ft) high. The

enclosed volume amounts to a very handy 3.5m³ (126ft³). Chassis and frame is of RHS construction

and enclosed panel material can either be steel, zinc anneal, zinc aluminium, composite or suitable

alternatives. Drawbar mounted spare wheel carrier, rear door swings sideways and intergrated

overhead racks are some of the key features.

Enclosed Size LxWxH: 2100x1200x1400mm (7x4x4½ft)

Overall Size LxWxH: 3780x1715x2200mm (12½x6x7½ft)

Max. ATM: 1750kg

TARE: ±450kg

Construction: Chassis & Frame RHS (various sections)


Features: Finishing trim for a great professional look, ladder storage racks, spare wheel mount

2200kg Single Axle Flatbed Trailer

Our Single Axle Flatbed Trailer is specially designed for lighter applications hauling smaller vehicles

and loads. With a max ATM of 2200kg and a TARE of only 650kg you have a generous load capacity of

up to 1550kg. The trailer has a load area of 4200x1950mm and includes adjustable vehicle ramps with

fixed stabilisers.

Load Area LxWxH: 4200x1950x510mm (±14×6½x1.7ft)

Overall Size LxWxH: 5954x2460x2300mm (±19½x8x7½ft) Ramps Up

Max. ATM: 2200kg

TARE: ±650kg


Chassis & Frame Construction: Channel, RHS & SHS (various sections)


Features: Adjustable ramps, front guards, light weight, quick ramp deployment & storage

The trailer features an optional chariot style nose guard to protect the cargo from potential stone

damage from the tow vehicle. This is particularly useful on long-haul trips and on dirt roads. The

design also includes handy features like tie-down hooks, double safety chains and chequer plate bed

that could be either full width or strip.

2500kg Flatbed Trailer

This flatbed trailer is designed with two ramps that conveniently stow away under the trailer bed

when not in use. The design also includes handy features like tie-down hooks, double safety chains

and chequer plate bed. There is also a winch mounting for dragging non-running vehicles onto the

trailer.

Bed Size: 4200x1870mm (14×6 ft)

Overall Size: 6200x2380mm (20×8 ft)

Max. ATM: 2500kg

TARE: ±700kg

Chassis Construction: RHS (various sections)

Running Gear: Tandem Beam Axle & Leaf Springs

Options Included: Winch bracket, tie-down hooks…

2500kg Tilt Flatbed Trailer

The flatbed tilt trailer is designed to tilt at a pivot point behind the drawbar, allowing the bed to tilt

and enabling better access to the load area. Choose hydraulic or pneumatic tilt-assist or simply use

unassisted tilt. The optional rear drop ramps are hinged on the trailer making for quick deployment,

safe loading and easy storage in upright position. Also included are handy features like tie-down

hooks, double safety chains and weight-saving chequer plate bed.

Bed Size: 4200x1870mm (14x6ft)

Overall Size: 6120x2380mm (20x8ft)

Max. ATM: 2500kg

TARE: ±750kg



Suspension: Tandem Beam Axle & Leaf Springs

Options Included: Tilt-assist mechanisms – hydraulic or pneumatic, Tie-down hooks, Drop ramps,

Jerry can holders, Spare wheel mount on drawbar

3500kg Flatbed Trailer

With a max. ATM of 3500kg and a TARE of 1000kg you have a generous load capacity of up to

2500kg. The trailer is designed with two pivot ramps that hinge on the rear of the trailer and held in

the upright position with sturdy supports. Loading ramp angle is ±17° and the design includes handy

features like tie-down hooks, double safety chains and chequer plate bed. There is also a winch

mounting for dragging non-running vehicles onto the trailer.

Bed Size: 4800x1760mm (15’9″×5’9″)

Bed Height: 537mm (1’9″)

Overall Size: 6690x2300mm (21’11″×7’6″)

Ramp Upright Height: 2287mm (7’6″ ft)

Max. ATM: 3500kg

TARE: ±1000kg


Chassis Construction: RHS (various sections), Angle, Deck Plates


Features: Vehicle Ramps, Winch bracket, tie-down hooks…

4.8m Flat Top Trailer

A full width trailer bed extending over the wheels to give the maximum load area possible – great for

large loads or to be used as a platform for onsite work or remote jobs. With a max. ATM of 3500kg

and a TARE of ±1000kg, you have a generous load capacity of up to 2500kg. The front features a sturdy

headboard frame to assist with securing loads.

Bed Size: 4800x2400mm (16×8 ft)


Overall Size: 6484×2400mm (22×8 ft)

Max. ATM: 3500kg

TARE: ±1000kg

Load capacity: up to 2500kg

Construction: RHS (various sections), Checker plate floor

Suspension: Tandem Beam Axle & Leaf Springs (or similar)

The Flat Top trailer can be built with traditional tie-down side rails, or if you prefer, side panels that

give the trailer a clean stylish look. The front of the bed features a support frame to assist with

locating and securing loads. The design also includes handy features like tie-down hooks, double

safety chains and chequer plate bed.

6m Flat Top Trailer

A full width trailer bed extending over the wheels to give the maximum load area possible – great for

large loads or to be used as a platform for onsite work or remote jobs. With a max. ATM of 3500kg

and a TARE of ±1180kg, you have a generous load capacity of up to 2320kg. The front features a sturdy

headboard frame to assist with securing loads.

Bed Size: 6000x2400mm (20×8 ft)


Overall Size: 7634×2400mm (25×8 ft)

Max. ATM: 3500kg

TARE: ±1180kg

Load Capacity: ±2320kg

Construction: RHS (various sections), checker plates floor


The Flat Top trailer features traditional tie-down side rails, front headboard to assist with locating and

securing loads. The design also includes handy features like tie-down hooks, double safety chains and

chequer plate bed.

Motorbike Trailer

This is a practical design that is inexpensive and relatively easy to build. Includes handy features like

tie-down hooks, spare wheel carrier, jerry can holder and a checker plate bed. Features staggered rails

for fitting up to 3 bikes, chassis mounted tie-down lugs, two jerry can holders, spacious drawbar with

lots of room for storage or a toolbox, as well as a side-mounted spare wheel carrier.

Bed Size: 2200x1500mm (±7x5ft)

Overall Size: 4000x2000mm (13×6.5ft)

Max. ATM: 1000kg

TARE: ±250kg



Options Included: Jerry Can Holders, Tie-down hooks and more

Cage Trailerdesign also includes handy features like tie-down hooks, double safety chains and...

Documents

Transcript of Cage Trailerdesign also includes handy features like tie-down hooks, double safety chains and...