8/6/2019 CAESAR II Trainer's Profile

1/3

Muhammad Umair Arshad

-------------------------------------------------------------------------------------------

EXPERIENCE PROFILE

PIPING STRESS ENGINEER

My overall professional experience is more than 6 year & working in Piping Stress Analysis for 5.5years. My first design job has proven to be a real successful experience in my professional career.

The job description is as follows:

Identification of Critical Lines under defined rules for Static and Rotary Equipments.

Piping flexibility analysis specification preparation. Modeling of critical line circuits in Caesar-II Software.

Setting up the load cases to perform static analysis and also wind and seismic analysis If required.

Identifying Supports, Restraints or Special pipe supports for Critical lines.

Using of Hanger Supports where required and preparing their data sheets. Calculations for the Nozzle Displacements of different equipments.

Preparation of Nozzle evaluation sheets for Static and Rotary equipments.

Loading calculations of pipes on structural and grounded supports. Preparation of the stress isometrics manually and also with the software.

Coordination with the civil and mechanical engineers regarding loading information.

Recommendations to the piping designers to enhance the piping flexibility.

PROJECTS

Gassi Touil Project AlgeriaClient: JGC (Japan Gasoline Corporation)

Currently I am leading Stress Analysis of Gassi Touil Project Algeria. The job consists of about 350

calculations including multi tasks like Civil Loading, AFCs, Towers, Heat Exchangers, Compressors,Pumps and various equipment nozzle evaluations & Stress Analysis. Scheduling, Planning, Monitoring

& Managing the activities of Stress Analysis for this EPC job along with meeting the clients

expectations fulfilling the quality & schedule with minimum cost impact.

Area of common pipe rack was also handed over to me, for closing 60% clients model reviewcomments. So this was a blissful opportunity to work with PDS operators & then Final Isometric

issuance was also performed by me.

Bonny River Terminal Expansion NigeriaClient: JGC (Japan Gasoline Corporation)

Worked on different areas of the project on miscellaneous type of equipments including pumps, heat

exchangers and vessels. This was my debut project.

Fertil Urea Debottlenecking (Ruwaiz Fertilizers Limited)Client: DEL (Descon Engineering Limited)

Stress Lead engineer on the project handling the CO2 Recovery, Granulation & Utility Areas. About 92

calculations were done on the project for S&T Heat Exchangers, Plate & Frame Heat Exchangers

Centrifugal Pumps, Sump pumps, Towers, Vessels, Air Fin Coolers & very challenging calculationsrelated to Turbines.

8/6/2019 CAESAR II Trainer's Profile

2/3

Bosicor CDU Revamp ProjectClient: DEL (Descon Engineering Limited)

Stress Lead engineer on the project to enhance the capacity of 14500BPD existing plant to 30,000BPD.

About 40 calculations were done for S&T Heat Exchangers, Pumps, Crude Oil Heater, vessels andColumns.

Oxychem Hydrogen Peroxide

Client: DEL (Descon Engineering Limited)

Stress Lead engineer on the project of first Hydrogen Peroxide plant in Pakistan. About 40 calculations

were done on this project.

ICI Soda Ash Expansion ProjectClient: ICI Pakistan Chemicals Industries

Stress Analysis of the project to enhance the capacity of 235KTPA existing plant to 285KTPA.

Arranged special supports and route for highly critical lines on existing rack between existing lines.

Sulfur Recovery UnitClient: PDIL (Presson Descon International Limited)

Stress Lead Engineer on the project of Oil & Gas Development Corporation Pakistan. 50 calculationsare involved on the project includingJacketed Piping.

Wellhead Miano-12Client: OMV Pakistan

Project manager on the wellhead project, involves scope of lay outing, design information of civil

foundations as well as stress analysis of above & under ground piping.

Pak American Fertilizers LimitedClient: Pak American Fertilizers Limited

Stress Lead Engineer on the project of Fertilizer capacity enhancement & Benfeild Recovery Unit.

Miscellaneous Projects

OMV: Miano 11 Wellhead Development Project

ECPL (Engro chemicals pvt. Ltd.): Detailed Engineering of civil Works (utilities) for newammonia complex

OMV: SAWAN 11 Wellhead Development Project (Including

Underground)

BAPCO: Modification of gas dehydration unit

MOL Manzalai Field Development Surface Facilities

PROFESSIONAL SKILLSConducting training of stress Analysis & Caesar II for new hires in JGC-Descon for 3 years.

INDUSTRIAL VISITS 1 week visit of Bosicor Refinery for Tie-in verification.

1 day visit of ICI plant for Tie-in verification.

8/6/2019 CAESAR II Trainer's Profile

3/3

ACADEMIC QUALIFICATIONM.S. Total Quality Management 2006-2007 University of the Punjab LahoreB.Sc. Chemical Engineering 2000-2004 NFC Institute of Engg. & Fertilizer Research Fsd.

Effective Communication Skills Workshop (2 Days Workshop)Center Of Management Development

COMPUTER SKILLS CAESAR II. (Piping Stress Analysis Software).

Nevis Works. Operation (3D model Software) MS Office. (MS Word, Excel, Power Point, Access etc.)

Adobe Acrobat. (Full command)

PERSONAL SKILLS

Excellent orator and debater, capable of doing well versed presentations.

Excellent time management skills hence ability to meet deadlines. Enjoy working in a group and can also work alone with same efficiency.

Professionally committed and determined to progress in my career.

Prepared to take challenges set forth.

PERSONAL INFORMATIONFathers Name : Ch. Muhammad Arshad Munir

Birth Date : July 27, 1981N.I.C Number : 36502-8109941-9

Martial Status : Married

Religion : Islam

Nationality/Domicile: Pakistan/PunjabLanguages : English, Urdu, Punjabi