Caesar Business Faria Lima, São Paulo SP - Brazil May 19 ... · PDF fileCaesar Business...
Transcript of Caesar Business Faria Lima, São Paulo SP - Brazil May 19 ... · PDF fileCaesar Business...
2014 ESSS CONFERENCE & ANSYS USERS MEETINGCaesar Business Faria Lima, São Paulo SP - BrazilMay 19-21, 2014
FINAL PROGRAM
Organization:
Sponsors:
Academic Challenge Support:
ArgentinaBuenos Aires
May, 14
PeruLima
May, 14-15
ChileSantiago
May, 16
BrazilSão PauloMay, 19-21
ColombiaBogotá
May, 12-13
WELCOME
REGISTRATION
The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America.
During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software update, plenary sessions, free workshops, user technical presentations, and ask the expert sessions.
Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time.
THE EVENT
• Pre-Conference Training Courses
• Plenary Keynote Speakers
• Software Update
• Free Workshops
• 80+ User Technical Presentations
• Ask the Expert
• Academic Challenge
www.esss.com.br/usersmeeting
8:00 REGISTRATION OPEN
8:30 TRAINING COURSES
10:00 REFRESHMENTS IN EXHIBITION AREA
10:30 TRAINING COURSES
12:00 LUNCH
13:00 TRAINING COURSES
15:30 REFRESHMENTS IN EXHIBITION AREA
16:00 TRAINING COURSES
17:30 END OF 1st DAY
uu May 19
CONFERENCE AT-A-GLANCEuu May 20 uu May 21
8:00 REGISTRATION OPEN
8:30 FREE WORKSHOPS
9:30 SOFTWARE UPDATE
10:30 REFRESHMENTS IN EXHIBITION AREA
11:00 OPENING SESSION11:10 Alvaro Toubes Prata - Ministério da Ciência, Tecnologia e Inovação MCTI
National Secretary of Technological Development and Innovation11:40 Ravi Kumar - ANSYS, Inc.
Regional Sales Director12:10 Álvaro Maia da Costa - PETROBRAS
Technical Advisor to the Presidency 12:50 LUNCH
14:30 TECHNICAL SESSIONS
15:50 REFRESHMENTS IN EXHIBITION AREA
16:20 TECHNICAL SESSIONS
17:40 ASK THE EXPERT
18:10 CONFERENCE SOCIAL (COCKTAIL)
8:00 REGISTRATION OPEN
8:30 FREE WORKSHOPS
9:30 SOFTWARE UPDATE
10:10 REFRESHMENTS IN EXHIBITION AREA
10:40 Pablo Filgueira Rodeiro - Whirlpool S.A.Global Manager, Simulation Based Design
11:05 Rodrigo Tasca - ESSSAccount Manager
11:45 Evandro S. Nogueira - Ministério da Ciência, Tecnologia e Inovação MCTIArmy Major - Coordination of Sensitive Goods
12:10 Corrado Groth - RBF MorphTechnical Manager
12:25 ESSS / ANSYS Customer Portal12:35 ESSS ACADEMIC CHALLENGE AWARD12:50 LUNCH
14:30 TECHNICAL SESSIONS
15:50 REFRESHMENTS IN EXHIBITION AREA
16:20 TECHNICAL SESSIONS
17:20 ASK THE EXPERT
17:50 CLOSING SESSION (EACH ROOM)
2014 ESSS CONFERENCE & ANSYS USERS MEETING
PLENARY SESSION
Room FARIA LIMA 2
11:00OPENING SESSIONClovis Maliska Jr. - ESSSPresident
11:10 Alvaro Toubes Prata - Ministério da Ciência, Tecnologia e Inovação MCTINational Secretary of Technological Development and Innovation
“Challenges and opportunities for Technological Development and innovation in Brazil”
11:40
Ravi Kumar - ANSYS, Inc. Regional Sales Director
“Predict with Confidence utilizing Comprehensive Solution Practices”
12:10
Álvaro Maia da Costa - PETROBRAS Technical Advisor to the Presidency
“Overcoming the Challenge of the Salt”
Room FARIA LIMA 2
10:40
Pablo Filgueira Rodeiro - Whirlpool S.A.Global Manager, Simulation Based Design
“Driving Product Development with CAE at Whirlpool Corporation – A Knowledge Perspective ”
11:05
Rodrigo Tasca - ESSSAccount Manager
“Productivity Enabling Simulation Driven Product Development” - ESSS
11:45
Evandro S. Nogueira - Ministério da Ciência, Tecnologia e Inovação MCTIArmy Major - Coordination of Sensitive Goods
“Brazilian Outreach Programme (PRONABENS) for the industry and the applications of CAE Tools on the Implementation of the CWC (Chemical Weapons Convention) in Brazil under the Article X for Assistance and Protection purposes”
12:10
Corrado Groth - RBF MorphTechnical Manager
“RBF Morph Software - How to Reshape the CAE Workflows by Radial Basis Functions Mesh Morphing”
12:25 ESSS / ANSYS Customer Portal
12:35 ESSS ACADEMIC CHALLENGE AWARD
uu May 20 uu May 21
2014 ESSS CONFERENCE & ANSYS USERS MEETING
2014 ESSS CONFERENCE & ANSYS USERS MEETING
TRAINING COURSES
VenueRoom
CAESAR BUSINESS FARIA LIMASÃO PAULO 4
CAESAR BUSINESS FARIA LIMASÃO PAULO 5
CAESAR BUSINESS FARIA LIMASÃO PAULO 6
CAESAR BUSINESS FARIA LIMASÃO PAULO 7
8:30 - 17:30
Combustion Modeling using ANSYS FLUENT 15.0
Contents: 1. Gas Combustion,;2. Detailed Chemistry;3. Surface Chemistry;4. Pollutant Formation;5. DPM, Spray, Solid Combustion6. LES/Gas Turbine Applications.
Instructor: Stefano Orsino, ANSYS, Inc.Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
Turbomachinery Flow Modeling using ANSYS CFX 15.0
Contents: 1. Modelling Single Frame of Reference (SFR);2. Modelling Multiple Frames of Reference (MFR);3. Pre-processing using ANSYS Turbo-Pre;4. Advanced modelling for transient turbomachinery
simulations;5. Post-processing using ANSYS Turbo-Post.
Instructor: Bruno Contessi, ESSSLenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
Analysis and Design of Electromechanical Systems Contents:
1. Introduction to Electromechanical Systems: The Integration of Magnetic Components with Drives;
2. Detailed Component Design and Analysis using Computational Electromagnetics:• Electric Machine Design;• Transformer Design;• Advanced Core Loss Capability;• Consideration of Temporal and Spatial Harmonics.
3. Multiphysics approach to Electric Machine & Transformer Design:• Thermal Considerations;• User defined output and Motor Design Kit;• NVH - Acoustic Noise• Demo.
4. Power Electronics Design for Drive Systems - a Multi-Scale Approach:• Device Characterization of IGBT, Power MOSFET and
Power Diode;• Equation Based Characterization;• Switch Level Models.
5. Advanced System Level Simulation Leveraging the Power of Reduced Order Models (ROMs):• System Level ROMs Extracted from Computational
Electromagnetics for Motors/Generators and Transformers;
• System Level ROMs Extracted from Computational Fluid Dynamics;
• System Level ROMs Extracted from Computational Mechanics.
Instructor: Scott Stanton, ANSYS, Inc.Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
Composite Materials Modeling using ANSYS Mechanical 15.0 and ACP
Contents: 1. Composite Introduction;2. ANSYS Composite PrepPost Workflow;3. ANSYS Composite PrepPost Integration
in ANSYS Workbench;4. Rosettes;5. The Oriented Element Sets;6. Draping;7. Solid Modeling;8. Parameters in ANSYS Composite PrepPost;9. Failure Criteria;10. Progressive Failure and Crack Growth Analyses.
Instructor: Eduardo Francisco Rocha de Araujo, ESSSLenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
uu May 19
2014 ESSS CONFERENCE & ANSYS USERS MEETING
TRAINING COURSES
VenueRoom
CAESAR BUSINESS FARIA LIMASÃO PAULO 8
ESSS SP1
ESSS SP2
8:30 - 17:30
Structural Simulation with ANSYS 15.0 - New Features and Integration Workbench-APDL Contents:
1. New Contact Features;2. Bolt Joint Contact;3. Contact Debonding and Interface Delamination
for Composites;4. Shell-to-Solid Submodeling;5. Mesh Import in ANSYS Workbench;6. Model Assembly;7. APDL Programming Features in Workbench Interface.
Instructor: Roberto Silva, ESSSLenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
Electromagnetic Analysis of Electronic Products Contents:
1. Introduction to the concept of full wave electromagnetic analysis;
2. Importing MCAD geometries;3. Boundaries and excitations setup for RF
applications;4. Electromagnetic extraction;5. How to create near and far field plots;6. Electric and magnetic fields plot; 7. Comparison between simulation and
measurements from local customers;8. Beam scanning antenna simulation;9. Optimization of the beam scanning antenna
to comply with Anatel Resolution 610;10. Design and optimization of an impedance match
circuit for a dipole antenna;11. Signal integrity analysis of serial channels of
a print circuit board;12. Near field, EMI and radiated emissions from
a print circuit board.
Instructor: Juliano Fujioka Mologni, ESSSLenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
Assessing Design Robustness and Reliability using Optimization Techniques Contents:
1. Introduction:• What is a robust design?• Statistical Moments;• Probability density function and Cumulative
distribution function. 2. Sampling Methodologies and Polynomial Chaos:
• Monte Carlo Random sampling;• Latin Hypercube sampling;• Polynomial Chaos.;
3. Robust Design Optimization: • Expected value vs Uncertainty;• Dominance Criteria and Pareto Design;• Reverse Multi-Objective Robust Design Optimization;• Hands on Example.
4. Reliability-Based Optimization: • Reliability Introduction;• Percentil estimation based on Polynomial Chaos;• Hands on Examples;
Instructor: Guilherme Jenovencio, ESSSLenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).
uu May 19
2014 ESSS CONFERENCE & ANSYS USERS MEETING
Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 78:30 - 9:00
Structural Mechanics: Bolt Modeling in R15.0
Instructor: Fabiano Nunes, ESSS
Fluid Dynamics: Pre-processing using SpaceClaim
Instructor: Leon White Nogueira, ESSS
Electromechanical: Harmonic Stress Modeling and Acoustic Noise in Electric Motors
Instructor: Scott Stanton, ANSYS, Inc.
HF Electromagnetics: Optimization of the beam scanning antenna to comply with ANATEL Resolution 610/2013
Instructor: Juliano Fujioka Mologni, ESSS
modeFRONTIER: Making web-based optimization real
Instructor: Matteo Nicolich, Esteco
9:00 - 9:30
Structural Mechanics: What´s new related to Fracture Mechanics in R15.0
Instructor: Eduardo Araújo, ESSS
RBF Morph: A simple set-up for complex workflows
Instructor: Corrado Groth, RBF Morph
HF Electromagnetics: New Features of ANSYS HFSS 2014
Instructor: Juliano Fujioka Mologni, ESSS
An introduction to Topology Optimization Method focused on Mechanical Engineering
Instructor: Eduardo Simões / Valmir Fleischmann, VirtualCAE
uu May 20
FREE WORKSHOPS
Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 78:30 - 9:00
Structural Mechanics: Beam Elements Analysis
Instructor: Thiago Lopes, ESSS
Fluid Dynamics: Combustion Modeling - Finite-Rate x LFM ApproachesInstructor: Raphael David Bachi, ESSS
ANSYS Customization Tool Kit: Customizations based on ACT
Instructor: Luiz Lima, ESSS
SpaceClaim: Create Clean Geometry for Analysis from Structural Optimization Outputs
Instructor: Roman Walsh, SpaceClaim
VCollab: Reduce, Visualize, Mine & Share ANSYS DataInstructor: Prasad Mandava, VCollab
9:00 - 9:30
Structural Mechanics: Workflow Enhancements in ANSYS Workbench R15.0
Instructor: Roberto Silva, ESSS
ANSYS EKM: New Features R15.0 - Remote Visualization & Job TemplatesInstructor: Vinicius Strugata Ambrosio, ESSS
uu May 21
2014 ESSS CONFERENCE & ANSYS USERS MEETING
SOFTWARE UPDATE
Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7
9:30 - 10:30
ANSYS Structural Mechanics Update
Tim Pawlak ANSYS, Inc.
ANSYS Fluid Dynamics Update
Stefano Orsino ANSYS, Inc.
ANSYS Electromagnetics Update
Scott Stanton ANSYS, Inc.
Esterel: Embedded Systems and Software Engineering with Complete Virtual Prototyping
Tony Karam ESTEREL-Technologies
modeFRONTIER Update and ESTECO Enterprise Solutions
Matteo Nicolich ESTECO
uu May 20
Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 6 SÃO PAULO 7
9:30 - 10:10
ANSYS Workbench Update
Tim Pawlak ANSYS, Inc.
ANSYS Reacting Flow Update: CFD & Reaction Design
Stefano Orsino ANSYS, Inc.
Ensight: FEA & CFD Post-processing
Martin Faber CEI
Rocky
Alexander Potapov GDI
uu May 21
2014 ESSS CONFERENCE & ANSYS USERS MEETING
Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 SÃO PAULO 8Chairman Germano Gavarrão Fabiano Diesel Karolline Ropelato Fabio Kurokawa Giuseppe Mirlisenna Juliano Mologni14:30 A Procedure to Integrate AQWA with
FriendShip for the Application of Optimization Techniques in PSV Vessels DesignMiguel Altimari Perdigão Pelia - POLI-USP
Use of FEA to Improve the Design of Suspension Springs for Reciprocating Compressor Mattias Castro - Embraco S.A. / Fabiano Diesel - ESSS
FEM-based Modeling, Simulation and Calibration of Hydraulic Fracturing for Oil and Gas ApplicationsJohannes Will - DYNARDO GmbH
FSI - Special Impeller for AgitatorsAlexandre Sampaio - Semco
Verifying the Influence of Modifying the Geometry Parameters in a Typical Pump’s Impeller from an ESP SystemAna Carla Costa Andrade - Universidade Federal RN
Reconfigurable Resonator for RFID Chipless TagAndreia Ap. de Castro Alves - UNICAMP
14:50 Hydrodynamics of the Flow Around an Underwater Pipeline with the Use of CFDDiener Volpin Ribeiro Fontoura - UNICAMP
Investigation of the Discharge Port Position of Hermetic CompressorsJonatas Ferreira Lacerda - TPC
A Methodology for Determining the Rotordynamics Coefficients of a Hybrid Seal by CFDLetícia de Rezende Tapajoz - PETROBRAS
ANSYS Mechanical Coupling Control in FSI Simulations to Reduce Computational TimeTadeu Tonheiro Rodrigues - Embraco S.A. / Bruno Contessi - ESSS
Geometry prep for turbomachineryRoman Walsh - SpaceClaim
Optically Controlled Adaptive Antenna for ISM Bands and Tri-band Slotted Waveguide Antenna Array for Millimetric-waves ApplicationsIgor Feliciano Costa - Inatel / UNIFEI
15:10 A Numerical Study of Towing Tank Resistance Hydrodynamic Experiments for Submerged BodiesJoão Lucas Dozzi Dantas - IPT
Taking Advantage of DesignXplorer in Ideation StageCassiano Antunes Cezario - WEG
Effect of Nozzles Design and Configuration on Catalyst and Gas Homegenization in FCC RiserDaniel Cicero Pelissari - UNICAMP/PETROBRAS
Hydraulic Fracturing Modelling in a Multilayer Reservoir through FEMPedro Cheroto - ESSS
Development of a Semi-Axial Pump through CFDIsmael Nicholas Schröer - Higra
Multi-scale Based Electric Drive System Simulation Lucas Kostetzer - Esterel-Technologies/ESSS
15:30 CFD Water on Deck Simulations for FPSOsDaniel Fonseca - PETROBRAS
Numerical Evaluation for Channel Position in a Helical Oil Pump Applied on Reciprocating CompressorsMauricio Pereira Tada - Embraco S.A. / Martin Kessler - ESSS
Experimental and Numerical Vortex Induced Vibration Analysis in a Horizontal PipePatrick Farias - FMC
FSI Analysis of Plate Heat ExchangersRafael Sanches Rangel - PETROBRAS
CFD Modeling of a Stirred Tank Heated by Helical Coils to Obtain the Nusselt EquationRonald Jaimes Prada - UNICAMP
Analysis of the Electric Field in the Vicinity of a Metal Vacuum Dielectric Triple Junction by the Use of the Software MAXWELL-ANSYS Guilherme Mauad Sant Anna - UNICAMP
15:50 REFRESHMENTS IN EXHIBITION AREAChairman Armando Souza Roberto Silva Daniel Boniatti Luiz Lima Eduardo Araújo Ricardo Barros16:20 Radar Cross Section and Antenna Co-Site
in AircraftsJuliano Mologni - ESSS
Explicit Simulations of Ceramic Materials With Ballistic ApplicationsGuilherme Pinto Guimarães - CTEx
Pre-certification of ROPS for Agricultural Tractors through CAE TechnologyIgor Saveljevas Rodrigues - VirtualCAE
Finite Element Analysis for Structural Reinforcement in Concrete Railway BridgesCarlos Alberto Medeiros - UMC
Crack Propagation Simulation by ANSYS Under Constant Amplitude Loading and Correlation with Experimental DataLuiz Carlos H. Ricardo - Ipen
Particle Deposition During Breath Holding and Exhalation Using Computational Fluid Dynamics (CFD)Liliana de Luca Xavier Augusto - UFSCar
16:40 Complete Avionics System SimulationTony Karam - Esterel-Technologies
The GTN Damage Model Application on Mechanical Conformation ProcessEduardo Luís Gaertner - Embraco S.A. / Fabiano Diesel - ESSS
Numerical and Experimental Study of Constitutive Models for Plasticity Representation in Cases with Statics LoadsRóbinson João Jabuonski Júnior - Stara S.A.
Thermoviscoelastic Model with Ageing for Mass ConcreteFlavio Mamede - Furnas
Supporting ANSYS Workbench with Valid and Traceable Materials Property ModelsGustavo Olivella - Granta Design
Fluid Structure Interaction Analysis in Abdominal Aortic AneurysmAntonio Braulio Neto - POLI-USP
17:00 Advanced Techniques for Electromechanical Design and Analysis Using a Combined Finite Element Method and System SimulationScott Stanton - ANSYS, Inc.
Leveraging SGI’s UV™ and VizServer® Platform to Enable Multiple CAE Users to Run ANSYS® Software with Remote Visualization in a Data CenterEverton Paulino - SGI
Validation of Filtered Two-fluid Models for Gas Particle Flows in Bubbling Fluidized BedsStefano Orsino - ANSYS, Inc.
Increasing Performance with IBM Platform Computing Marcos Pitanga - IBM
How your Technical Cloud Can Transform Engineering into a Powerful, Mobile and Collaborative ExperienceAndrea Rodolico - Nice
HP Workstations PortfolioAugusto Rosa - Planus
17:20 DOP Ballistic Investigations with Explicit AnalyzesGuilherme Pinto Guimarães - CTEx
Topology Optimization Method Considering a Consistent Manufacturing Constraints using ANSYSLeandro Garbin - VirtualCAE
Monitoring and 3D Thermal Modeling of the Spiral Casing of Batalha Hydroeletric Power Plant since its Early Ages Flavio Mamede - Furnas
Distortions Caused by the Welding Process: Comparative Evaluation Using Finite Element Analysis and Experimental AssessmentRafael Vetturazzi - UCS/ESSS
Hunting Hot Spots on a Hearing Aid Low Power ProjectPaulo Roberto Bueno de Carvalho - Design House -LSITEC
17:40 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert
uu May 20
USER TECHNICAL SESSIONS
2014 ESSS CONFERENCE & ANSYS USERS MEETING
USER TECHNICAL SESSIONS
uu May 21
Room FARIA LIMA 3 FARIA LIMA 4 SÃO PAULO 5 SÃO PAULO 6 SÃO PAULO 7 SÃO PAULO 8Chairman Ismael Daoud Bruno Contessi Carlos Fontes Roberto Silva Silvio Alano Cesareo Siqueira14:30 A Response Surface Model to Predict
Flammable Gas Cloud Volume in Offshore ModulesTatiele Dalfior Ferreira - UNICAMP
Thermal-Mechanical Analysis for the new Brazilian Synchrotron Light Source (Sirius) using ANSYS Workbench® Thiago Mendes da Rocha - Lab. Nacional de Luz Sincrotron
Bagasse Swirl Burner Design Explained by CFDDaniel José de Oliveira Ferreira - USP
Fitness for Service Assessment of a Storage TankHervandil Santanna - PETROBRAS
Structural Behavior of a Semi-Trailer Chassis Subjected to Lateral and Vertical Dynamic ManeuversLeandro Garbin - Guerra / VirtualCAE
Imperfections’ Influence in the Structural Resistance of SubmarinesThiago Pontin Tancredi - USP
14:50 Basic Engineering Design of Flares on oil Plataforms Using Computational Fluid DynamicsMauro Cresta de Barros Dolinsky - PETROBRAS/CENPES
Applying ANSYS/Fluent in the Teaching of Natural ConvectionThiago Antonini Alves - UTFPR
Development of Methodology for Fluid Dynamics and Heat Transfer Study in a Spray Wash Section of Coker FractionatorMariana Dantas - PETROBRAS/ESSS
Internal Sealing Performance of a Hydrotreating High Pressure Heat ExchangerRafael Pavan Bagagli - PETROBRAS
An Improvement Study of a Ejector Panel for the 2013 GarbageFábio Carlos Cavalcanti - Librelato Implementos Rodoviários S/A
The Influence of Non-uniform Velocity Profile at the Inlet of a CycloneKarolline Ropelato - ESSS
15:10 CFD Modeling on Gas Dispersion for Developing Response CurvesCarolina Marion de Godoy - UNICAMP
Using the Extension Library (ACT) to Perform a Modal Optimization in the Workbench EnvironmentMarcelo Verardi - WEG
Methodology of a Cool Down Analysis for Three Phase SeparatorsPatrick Farias - FMC Technologies / Thiago Ribeiro - ESSS
Flanges Stiffness Determination on Prestressed Bolted Connections and its Validation by Finite Element AnalysisCarlos Eduardo Ribeiro de Camargo Nogueira - USP
Understanding the Durability of Your DesignEduardo Araujo - ESSS
Numerical Evaluation of the Effective Width in Structures Built by Plates with Orthogonal Stiffeners: Comparison with Analytical Solutions Bruno Pegoraro - USP
15:30 Modeling Gas Dispersion and the Behavior of the Plume as a Function of the LeakageKarolline Ropelato - ESSS
Multiphase Simulation of a Pumping ModuleBruno Alexandre Contessi - PETROBRAS/ESSS
CFD Analysis of a Distillation Sieve Tray of the Ethanol IndustryGladson de Oliveira - UFSCar
Analysis of Repairs in Metal-Composite in the Oil Industry Carlos Eduardo Reuther de Siqueira - PETROBRAS
Simplification of Tridem Suspension for Transient Analysis of Trailer ChassisVinicius de Almeida Lima - VirtualCAE
FEM Modelling of the Torpedo Anchor Penetration in the Seabed Pedro Cheroto - ESSS
15:50 REFRESHMENTS IN EXHIBITION AREAChairman Nicolas Spogis Giuseppe Mirlisenna Armando Souza Eduardo Araújo Rodrigo Ferraz Fabio Kurokawa16:20 New Hopper System for Re-Screening Plant
Ueld da Nóbrega - ValeANSYS Technical PresentationTim Pawlak - ANSYS, Inc.
Comparison between Commercial and Free Numerical Codes in Simulations of Coal Combustion in Fluidized Beds: Fluent vs MfixCleiton Elsner da Fonseca - Unisinos
Computer Simulation Analysis of Material used in Compressed Air TankLeonardo Camilo dos Reis - USIMINAS
Hydrodynamic Shape Optimization of Semisubmersibles with Seakeeping Criteria Evaluated with Neural Network Response SurfaceFelipe Carvalho dos Santos - POLI-USP
Numerical Analysis of the Aerospace Vehicle 14-X B at Mach Number 7Alexandre Kazuo Carvalhal - Instituto de Estudos Avançados - CTA
16:40 Granular Flow of Particles Submitted to Pressurized Air InjectionMarcelo José Alba - Universidade Tecnológica Federal - PR
Computational Simulation of a Bag House Filter for Steel IndustryCarlos Fontes - Gerdau/ESSS
Numerical Evaluation of Natural Convection in Evacuated Tube Solar Collector Marcelo Dalla - UFRGS
Introducing Residual Stresses in FEM through INISTATE CommandPaulo Rogério Franquetto - CT da Marinha em São Paulo
Wind Power Unit Collaborative Multidisciplinary Optimization at AirworksMatteo Nicolich - ESTECO
Numerical Investigation to Identify Modal Parameters Considering Fiber Orientation of Flexible Composite Wing ModelsEduardo Francisco Rocha de Araujo - ESSS
17:00 Analysis of the Structure of a Conveyor Belt to Determine the Root Cause of its Failure with the Use of Computer SimulationLuiz Otavio Rocha Peres - Usiminas
Simulation of a Novel Assisted Toolholder for Precision MachiningLaercio Junior - UTFPR-PG
Numerical Simulation to Study the Vortices Formation in Water Intakes at HydroelectricsSérgio Leonardo Neves - Unisinos
Modeling of Heat Source Welding with Multiple Pass and Evaluation of Thermal Behavior Thiago Lopes - ESSS
A Procedure to Automatic Design of Structures using ANSYS APDL Coupled with modeFrontierBruno Pegoraro - USP
Preliminary Numerical Simulation of the Brazilian 14-X B Hypersonic Scramjet at Mach Number 7Felipe Jean da Costa - Instituto de Estudos Avançados - CTA
17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert
2014
3 ESSS COMPUTATIONAL
MODELING CHALLENGErd
2014 ESSS CONFERENCE & ANSYS USERS MEETING
uu CHALLENGE WINNERS ANNOUNCEMENT
Winners will be announced at the end of the Plenary Session on Wednesday May 21, 2014.
ESSS COMPUTATIONAL MODELING CHALLENGE: 3rd EDITION
uu SUPPORT
ESSS and Eletrobras Cepel are pleased to invite all conference participants to visit the poster session at the foyer on May 20 and 21, 2014. The challenge was created with the objective to promote the exchange of ideas and experiences between academia and industry.
In this 3rd edition, ESSS will count with the contribution of the Electric Power Research Center (Cepel-Eletrobras), considered the greatest research center on electric power of the Southern Hemisphere.
The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS.
2014 ESSS CONFERENCE & ANSYS USERS MEETING
SOUTH AMERICA REGIONAL SERIES IN NUMBERS
ColombiaBogotá
May 12-13
ArgentinaBuenos Aires
May 14
PeruLima
May 14-15
ChileSantiagoMay 16
BrazilSão PauloMay 19-21
TECHNICAL PAPERS 28 22 18 18 90
COMPANIES ATTENDANCE 20 25 20 25 60
UNIVERSITIES / R&D CENTERS ATTENDANCE 15 15 10 10 30
EXPECTED NUMBER OF ATTENDEES 100 100 100 100 300
The South America Regional Series will be held in Brazil, Argentina, Chile, Peru and Colombia. At the end of this conference series, more than 150 companies, universities, and R&D Centers will present a total of 150 user technical papers to approximately 600 attendees in South America.
www.esss.com.br/usersmeeting
VENUE
Daily rate for 2014 ESSS Conference & ANSYS Users Meeting. Phone Number: +55 (11) 3049 6623
Single Room: R$ 486,00 (+ 5%) Double Room: R$544,00 (+5%)
RATES
For another options of Hotels in the region, please contact Valencia Agência de Viagens e Turismo Ltda.
E-mail: [email protected] Phone: (11) 3111 2454 / (11) 9 9621 6875
CAESAR BUSINESS FARIA LIMA
2014 ESSS CONFERENCE & ANSYS USERS MEETING
INFORMATION AND REGISTRATION
www.esss.com.br/usersmeetingE-mail: [email protected] São Paulo: +55 (11) 3046 5744 | Rio de Janeiro: +55 (21) 3293 1300 | Florianópolis: +55 (48) 3953 0000
Rua Olimpíadas, 205 - São Paulo - SP - BrazilPhone Number: +55 (11) 2161 4900 www.accorhotels.com
Strategically located in the city’s new business hub, the Vila Olímpia, which is considered to be an important commercial and financial center, and home to major companies. The hotel is situated less than 10 minutes from the airport and from Ibirapuera park and is very close to excellent bars and restaurants, prestigious international stores and the city’s best entertainment venues.
Airports
GUARULHOS (36.50 km / 22.68 mi)CONGONHAS (5.50 km / 3.42 mi)
MORE INFORMATION