CAD Services And BIM Services Requirements To Tesla Outsourcing Services For Cost Effectiveness
-
Upload
tesla-outsourcing-services -
Category
Documents
-
view
12 -
download
0
description
Transcript of CAD Services And BIM Services Requirements To Tesla Outsourcing Services For Cost Effectiveness
-
www.teslaoutsourcingservices.com Page 1
Architectural Drawings-Its Importance in Architectural Industry
Architectural drawings are technical drawings created by architects to exhibit home interior as
well as exteriors, buildings, bridges and other simple as well as intricate structures. Architectural
Drawings provides in-depth representation of various aspects of a building or structure. These
drawings are utilized by architects to convert design notion into logical proposal, to interact with
clientele regarding the design ideas and concepts and to create a record of the construction
process. The architectural and construction industry worldwide require specific standards for
drawings. They predominantly relate to paper sizes, dimensions, symbols and blueprint markups.
Traditionally, Architectural drawings were drawn with ink on paper, and all copies desired
needed to be laboriously created manually. The advancement of the computer had a significant
influence on the techniques accustomed to design and develop Architectural drawings. This has
made manual drafting practically outdated, thus enabling us to employ natural shapes and
intricate geometry. Architectural Drawings nowadays are created utilizing CAD softwares like AutoCAD referred to as CAD Drawings. Architectural drawings allow basis for the scheduling
and creating budget of the project prior to actual construction process. These drawings are
created to scale in order to accurately exhibit relative sizes.
Various kinds of views employed in Architectural Drawings are:
Site Plan View:
View which is attained by looking upon the building or a location from the top is known
as Plan View. They typically exhibits exterior details like the boundaries lines, pathways
around the building, landscaping, parking areas, trees, etc.
-
www.teslaoutsourcingservices.com Page 2
Floor Plan View: It incorporates boxes in a building representing various types of room areas such as living
room, rest room, store room, balcony, lobby areas, etc. These provides details regarding
thickness of wall as symbolically represent windows, doors, fixtures and other amenities
Cross Sectional Views: Cross sectional view is acquired when one cut-through the building with a vertical
section plane. These views facilitate us in distinguishing changes in floor levels, roofs,
ceilings etc
Elevation View: Observing a building with a flat plane from single side which exhibits exterior look of the
building is known as Elevation View. There are different kinds of elevations such as front
elevation, north elevation, south elevation etc.
-
www.teslaoutsourcingservices.com Page 3
Architectural Drawings are categorized as:
Presentation drawings:
These drawings are employed to demonstrate design concepts to clientele. Fundamental
presentation drawings usually incorporate people, vehicles and vegetation, etc.
Presentation drawings created by architects are generally views or detailed site plans,
floor plans and elevations.
Survey drawings:
Survey Drawings are evaluated drawings of pre-existing property, structures and
buildings. Architects require a precise set of survey drawings as grounds for their
working drawings, to establish accurate dimensions for the construction task.
Record drawings:
Traditionally, architects used to make record drawings to comprehend and replicate the
great architecture known to them. They are also employed in construction projects,
wherein as-built drawings of the accomplished building take account of all the changes
done during construction process.
Working drawings or Construction Drawings:
Working drawings or Construction Drawings are detailed drawings employed in a
construction project. These are classified as Assembly, Location and Component
Drawings. Location drawings incorporate floor plans, elevation, cross-sections and
sections. They exhibit where the construction components are placed. Assembly
drawings exhibit how the various components are assembled. Component Drawings
facilitate self-contained components like Windows and door sets, to be manufactured in a
workshop, and sent to site accomplished and ready to install.
-
www.teslaoutsourcingservices.com Page 4
Contact Us:
Australia Office Address Canada Office Address India Office Address
17 Tinks Road,
Narre Warren
3805
Melbourne
Victoria
Call Us: (03) 8786 3814
Mo: 04 3174 5425
Global Business Park,
1065 Canadian Place, Unit# 124,
Mississauga, ON L4W 0C2
Canada
706, Pinnacle Business Park
Opp. Royal Orchid
Corporate Road
Prahladnagar
Ahmedabad 380015 e: [email protected]
Phone: +91 79 4000 8100
Fax: +91 79 4000 8103
Instant Messengers:
Skype: inquiry_tesla
MSN: [email protected]
Visit us: www.teslaoutsourcingservices.com
Presentation drawings: Survey drawings: Record drawings: Working drawings or Construction Drawings: