CaCartridge 57 mm L/70 Pre-FrFragmentedagmented...

1
Cartridge 57 mm L/70 Pre-Fragmented Cartridge 57 mm L/70 Pre-Fragmented High-Explosive C101 with Proximity Fuze High-Explosive C101 with Proximity Fuze For over 40 years, SNC TEC has been a leader in the manufacture and assembly of reliable high-quality ammunition and has meet the stringent operational require- ments of its clients. ISO 9001 certified since 1994, SNC TEC ensures that all its products meet the highest standards of quality, security and performance. The PFHE C101 cartridge, part of the 57mm family of naval ammunition, is a remarkable example of that result. Manufactured under BOFORS license by SNC TEC for the Canadian Forces, it is type classified by the Department of National Defence and meets all Canadian Forces requirements for safety, reliability and effectiveness. This round was specifically designed for air defence in order to optimise the volume of fragmentation delivered by each salvo of proximity-fuzed shells. The fragmentation effect of the shell is designed to give a high kill probability when bursting in proximity to aerial tar- gets. A large number of high velocity fragments are dispersed over a wide angle, thus delivering lethal splinters over large areas of the target. The shell incorporates an electronic proximity fuze, high-explosive bursting charge and a double-walled, high-grade steel body, which houses a large quantity of heavy alloy balls. Upon detonation the balls are given a high velocity and due to their low drag, and high density, achieve excellent penetration. The rear end of the shell is so formed that the fragments of the shell itself are spread out rearwards. PACKAGING • Two cartridges per reusable metal cartridge clip, which interfaces with the weapon system. • Each clip is packed in reusable plas- tic containers qualified to Canadian mili- tary and UN transport safety Standards. • A total of 30 containers are shipped on a single pallet giving the user access to the ammunition without removing the container from the pallet. (Total 60 rounds per pallet). Quality System SNC TEC Registered (Le Gardeur - St-Augustin - Nicolet) v ISO 9001 (2000) When it comes to innovative and safe products SNC TEC is Always on target ! 5, Montée des Arsenaux, Le Gardeur, Québec, Canada J5Z 2P4 w Telephone: (450) 581-3080 w Fax: (450) 581-0913 www.snctec.com E-mail: [email protected] TM TECHNICAL DATA Weapon System 57mm L/70 Cartridge length (w/fuze) 670mm Cartridge weight 6.1 kg Projectile length (w/fuze) 307mm Projectile weight 2.4 kg Mass of bursting charge 0.45 kg NAVAL AMMUNITION COMPONENTS Fuze Thompsons C33 or PF 57-80 Primer C19 Cartridge case Brass C11 Propellant NC 1281 Shell Projectile PFHE C24 BALLISTIC Muzzle velocity 1 025 m/s Maximum range 12 850 m.

Transcript of CaCartridge 57 mm L/70 Pre-FrFragmentedagmented...

Page 1: CaCartridge 57 mm L/70 Pre-FrFragmentedagmented …mail.gd-otscanada.com/imports/pdf/en/fiche_technique48.pdfCaCartridge 57 mm L/70 Pre-FrFragmentedagmented High-Explosive C101 with

Cartridge 57 mm L/70 Pre-FragmentedCartridge 57 mm L/70 Pre-FragmentedHigh-Explosive C101 with Proximity FuzeHigh-Explosive C101 with Proximity FuzeFor over 40 years, SNC TEC has been aleader in the manufacture and assembly ofreliable high-quality ammunition and hasmeet the stringent operational require-ments of its clients. ISO 9001 certifiedsince 1994, SNC TEC ensures that all itsproducts meet the highest standards ofquality, security and performance.

The PFHE C101 cartridge, part of the57mm family of naval ammunition, is aremarkable example of that result.Manufactured under BOFORS license bySNC TEC for the Canadian Forces, it istype classified by the Department ofNational Defence and meets all CanadianForces requirements for safety, reliabilityand effectiveness.

This round was specifically designedfor air defence in order to optimise thevolume of fragmentation delivered byeach salvo of proximity-fuzed shells.The fragmentation effect of the shell isdesigned to give a high kill probabilitywhen bursting in proximity to aerial tar-gets. A large number of high velocityfragments are dispersed over a wideangle, thus delivering lethal splintersover large areas of the target.

The shell incorporates an electronicproximity fuze, high-explosive burstingcharge and a double-walled, high-gradesteel body, which houses a large quantityof heavy alloy balls. Upon detonationthe balls are given a high velocity and dueto their low drag, and high density,achieve excellent penetration. The rearend of the shell is so formed that thefragments of the shell itself are spreadout rearwards.

PACKAGING· Two cartridges per reusable metalcartridge clip, which interfaces with theweapon system.· Each clip is packed in reusable plas-tic containers qualified to Canadian mili-tary and UN transport safety Standards.· A total of 30 containers are shippedon a single pallet giving the user access tothe ammunition without removing thecontainer from the pallet. (Total 60rounds per pallet).

Quality System SNC TEC Registered (Le Gardeur - St-Augustin - Nicolet) v ISO 9001 (2000)

When it comes to innovative and safe productsSNC TEC is Always on target !

5, Montée des Arsenaux, Le Gardeur, Québec, Canada J5Z 2P4 w Telephone: (450) 581-3080 w Fax: (450) 581-0913www.snctec.com E-mail: [email protected]

TM

TECHNICAL DATA

Weapon System 57mm L/70Cartridge length (w/fuze) 670mmCartridge weight 6.1 kgProjectile length (w/fuze) 307mmProjectile weight 2.4 kgMass of bursting charge 0.45 kg

NAVAL AMMUNITION

COMPONENTS

Fuze Thompsons C33 or PF 57-80Primer C19Cartridge case Brass C11Propellant NC 1281Shell Projectile PFHE C24

BALLISTIC

Muzzle velocity 1 025 m/sMaximum range 12 850 m.

BOFORS 40/57 mm 3P - Alternate Wars(0° NATO, RHA) on the 40 mm APFSDS-T. 40 mm APFSDS-T Mk I • Penetration: >120 mm RHA The study shows that 25% increase is possible in the L/70

BOFORS 40/57 mm 3P - Alternate Wars(0° NATO, RHA) on the 40 mm APFSDS-T. 40 mm APFSDS-T Mk I • Penetration: >120 mm RHA The study shows that 25% increase is possible in the L/70

COMPLETE ROBOTIC ARC WELDING SYSTEMS · 3.94” (100 mm) 23.94” (608 mm) 30.16” (766 mm) 3.74” (95 mm) 15.35” (390 mm) 2.40” (61 mm) 2.76” (70 mm) 14.57” (370 mm) 12.99”

COMPLETE ROBOTIC ARC WELDING SYSTEMS · 3.94” (100 mm) 23.94” (608 mm) 30.16” (766 mm) 3.74” (95 mm) 15.35” (390 mm) 2.40” (61 mm) 2.76” (70 mm) 14.57” (370 mm) 12.99”

BRUFER - Quality Products · 200 mm 200 mm 80 x 93 mm 80 x 70 mm 212751-2 2500 Kg 85 mm 200 mm 200 x 50 mm 80 x 93 mm 82 x 70 mm ... TUV N.W./P.N. [KGS) {KGS) N.w_/P.N. (KGS} AIR

BRUFER - Quality Products · 200 mm 200 mm 80 x 93 mm 80 x 70 mm 212751-2 2500 Kg 85 mm 200 mm 200 x 50 mm 80 x 93 mm 82 x 70 mm ... TUV N.W./P.N. [KGS) {KGS) N.w_/P.N. (KGS} AIR

PH Artichoke Ø480 - az666937.vo.msecnd.netDesign Poul Henningsen 17014-I1. 1 2 2 mm 40 - 45 mm 7 mm 2 m m A B C 3 A Arichoe 40 A 0 mm Arichoe 70 A 70 mm Arichoe 00 A 700 mm Arichoe

PH Artichoke Ø480 - az666937.vo.msecnd.netDesign Poul Henningsen 17014-I1. 1 2 2 mm 40 - 45 mm 7 mm 2 m m A B C 3 A Arichoe 40 A 0 mm Arichoe 70 A 70 mm Arichoe 00 A 700 mm Arichoe

042 it mm mm TCE-70 2,750 100 1 9.2 MED-9.5 9,450 … it mm mm TCE-70 2,750 100 1 9.2 MED-9.5 9,450 5.250 100 23 mm mm mm NAZ- 120 1200 142 160 7.8 35518; -frñ* 1 ,820 ,560 150 26.9

042 it mm mm TCE-70 2,750 100 1 9.2 MED-9.5 9,450 … it mm mm TCE-70 2,750 100 1 9.2 MED-9.5 9,450 5.250 100 23 mm mm mm NAZ- 120 1200 142 160 7.8 35518; -frñ* 1 ,820 ,560 150 26.9

Product Data Sheets - Mouser ElectronicsµF A V/µs mm mm pcs mm mm pcs mm mm pcs g 1.0 0.15 20 25 56.5 162 25 57 99 25 55 99 26 1.5 0.22 20 25 56.5 162 25 57 99 25 55 99 26 2.0 0.29

Product Data Sheets - Mouser ElectronicsµF A V/µs mm mm pcs mm mm pcs mm mm pcs g 1.0 0.15 20 25 56.5 162 25 57 99 25 55 99 26 1.5 0.22 20 25 56.5 162 25 57 99 25 55 99 26 2.0 0.29

Manual for installation and operation for · dimension, System SDL Ø mm mm SDH mm LS mm HS mm A mm B mm GX7.5 100 70 100 70 120 120 8 GX10 105 70 110 70 120 120 11 GX15 115 80 120

Manual for installation and operation for · dimension, System SDL Ø mm mm SDH mm LS mm HS mm A mm B mm GX7.5 100 70 100 70 120 120 8 GX10 105 70 110 70 120 120 11 GX15 115 80 120

Criticality Designation: YYeellllooww€¦ · 1 Main - Shell SA-516-70 88.500 mm 1677.000 mm ID 2 Top - Head SA-516-70 69.270 mm 1677.000 mm ID 3 Bottom - Head SA-516-70 69.270 mm

Criticality Designation: YYeellllooww€¦ · 1 Main - Shell SA-516-70 88.500 mm 1677.000 mm ID 2 Top - Head SA-516-70 69.270 mm 1677.000 mm ID 3 Bottom - Head SA-516-70 69.270 mm

CIRCULAR SAWS - VIGRA Saws.pdf · 2016. 8. 10. · 300 280 550 x 1200 x 1800 950 80 80 80 - 65 mm mm mm 80 70 - 70 x 65 100 x 70 75 x 70 - kW RPM mm mm kg mm mm SUPER BROWN 2000 SA

CIRCULAR SAWS - VIGRA Saws.pdf · 2016. 8. 10. · 300 280 550 x 1200 x 1800 950 80 80 80 - 65 mm mm mm 80 70 - 70 x 65 100 x 70 75 x 70 - kW RPM mm mm kg mm mm SUPER BROWN 2000 SA

Xcelite Contents€¦ · Tweezers Xcelite 269 Size Model 120 mm 00SA 4 3/4" 4 70 001 00 90 mm 0C9SA 3 1/2" 4 70 002 00 120 mm 1SA 4 3/4" 4 70 004 00 120 mm 2ASA 4 3/4" 4 70 005 00

Xcelite Contents€¦ · Tweezers Xcelite 269 Size Model 120 mm 00SA 4 3/4" 4 70 001 00 90 mm 0C9SA 3 1/2" 4 70 002 00 120 mm 1SA 4 3/4" 4 70 004 00 120 mm 2ASA 4 3/4" 4 70 005 00

L. 175,00 mm, 0° L. 175,00 mm, 30° L. 175,00 mm, 70° Otoscope Sinoscope Semiflexible Sinoscope Sinoscope.

L. 175,00 mm, 0° L. 175,00 mm, 30° L. 175,00 mm, 70° Otoscope Sinoscope Semiflexible Sinoscope Sinoscope.

Catalogo Iv Small - Infissi in PVC - Infissi in Alluminio · IA-70 IA-59s A-45 profilo da 70 mm con tre camere vetro camera spessore fino a 57 mm fermavetro taglio termico 2 guarnizioni

Catalogo Iv Small - Infissi in PVC - Infissi in Alluminio · IA-70 IA-59s A-45 profilo da 70 mm con tre camere vetro camera spessore fino a 57 mm fermavetro taglio termico 2 guarnizioni

RS Components2 608 662 018 AVZ 70 RT4 Carbide, ⌀ 70 mm 2 608 661 757 ACZ 85 EIB BIM-TiN, ⌀ 85 mm 2 608 661 758 AUZ 70 G 70 × 55 mm 2 608 662 346 AIZ 20 AT Carbide, 20 × 40 mm

RS Components2 608 662 018 AVZ 70 RT4 Carbide, ⌀ 70 mm 2 608 661 757 ACZ 85 EIB BIM-TiN, ⌀ 85 mm 2 608 661 758 AUZ 70 G 70 × 55 mm 2 608 662 346 AIZ 20 AT Carbide, 20 × 40 mm

AMMUNITION 20, 23, 30, 37, 40 and 57 mm

AMMUNITION 20, 23, 30, 37, 40 and 57 mm

LiquidEmbolicAgentsforEndovascularEmbolization ...ficial nidus was 70 mm Hg (70 mm Hg, 70 mm Hg), and distal to the artificial nidus, it was 13 mm Hg (13 mm Hg, 13 mm Hg), resulting

LiquidEmbolicAgentsforEndovascularEmbolization ...ficial nidus was 70 mm Hg (70 mm Hg, 70 mm Hg), and distal to the artificial nidus, it was 13 mm Hg (13 mm Hg, 13 mm Hg), resulting

PRODUCT CATALOGUE...DPE-70 SYSTEM » 5-chamber A class 70 mm profile » glass packet: max. 32 mm for a rounded glazing bar » glass packet: from 33 mm to 42 mm for a classic glazing

PRODUCT CATALOGUE...DPE-70 SYSTEM » 5-chamber A class 70 mm profile » glass packet: max. 32 mm for a rounded glazing bar » glass packet: from 33 mm to 42 mm for a classic glazing

CA TINO - diseniaduschen.de file4 5 Prof. 70 MIN 70 mm IDEAL 80 mm = = 400 = = 1000 / 1200 / 1400 mm 700 mm CX CX 27x14 700 mm 900 mm CX CX 17x14 Prof. 80 MIN 70 mm IDEAL 80 mm = =

CA TINO - diseniaduschen.de file4 5 Prof. 70 MIN 70 mm IDEAL 80 mm = = 400 = = 1000 / 1200 / 1400 mm 700 mm CX CX 27x14 700 mm 900 mm CX CX 17x14 Prof. 80 MIN 70 mm IDEAL 80 mm = =

FIFA Statuten 2016resources.fifa.com/mm/document/affederation/generic/02/78/29/07/... · Disciplinary measures 53 57-59 ... 69 A. FIFA fi nal competitions 61 70-73 B. International

FIFA Statuten 2016resources.fifa.com/mm/document/affederation/generic/02/78/29/07/... · Disciplinary measures 53 57-59 ... 69 A. FIFA fi nal competitions 61 70-73 B. International

NOM VISTES 90 mm 70 mm 10 20 CURS DATA 10 15 30 20 10 15 ... · NOM_ VISTES 90 mm 70 mm 10 20 CURS_ DATA_ 10 15 30 20 10 15 70 mm 10 10 . Created Date: 4/15/2013 6:33:11 PM

NOM VISTES 90 mm 70 mm 10 20 CURS DATA 10 15 30 20 10 15 ... · NOM_ VISTES 90 mm 70 mm 10 20 CURS_ DATA_ 10 15 30 20 10 15 70 mm 10 10 . Created Date: 4/15/2013 6:33:11 PM

Digital Servoamplifier SERVOSTAR® 300 · 303 / 306 / 310 341 / 343 / 346 Height 246 mm 246 mm Width 70 mm 70 mm Depth without connectors 171 mm 171 mm ... LU7 4WG phone : +44 (0)1525

Digital Servoamplifier SERVOSTAR® 300 · 303 / 306 / 310 341 / 343 / 346 Height 246 mm 246 mm Width 70 mm 70 mm Depth without connectors 171 mm 171 mm ... LU7 4WG phone : +44 (0)1525