Cabling Your Vision Control Panel V I S I O N · 2019. 3. 19. · QMD or Octane/QMD-X Frame Master...
Transcript of Cabling Your Vision Control Panel V I S I O N · 2019. 3. 19. · QMD or Octane/QMD-X Frame Master...
Cabling Your Vision Control Panel
4800DR-310-09
V I S I O N
© 2014 Ross Video Limited. Ross®, Octane®, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
REF
LOOPLOCK
CP
U
PS 1
PS 2
PS 3
PS 4
(Canada 120V~only)100-120V~
47-63Hz 9A 650W
(Canada 120V~only)100-120V~
47-63Hz 9A 650W
(Canada 120V~only))100-120V~
47-63Hz 9A 650W
(Canada 120V~only)100-120V~
47-63Hz 9A 650W
MAXIMUMRATING1950W
LAN1
10/100 10/100
LAN2GP I/O PERIPH1 PERIPH2 PERIPH3 PERIPH4 PANEL
USB
LTC A
B
CIN
DIN
EIN
FIN
GIN
HIN
I
OU
T
J
OU
T
K
OU
T
L
M
1
2
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
REF
LOOPLOCK
CP
U
LAN1
10/100 10/100
LAN2GP I/O PERIPH1 PERIPH2 PERIPH3 PERIPH4 PANEL
USB
LTC A
B
E
OU
T
CIN
DIN
1615141312111098765431 2
IN
PS
2P
S 1
1
2
Octane/QMD-X Frame
QMD Frame
6
6
6
6
6
VGA DVI PS1 USB
PREV NEXT
PS2
GA DVI PS1 USB
PREV NEXT
PS2GA DVI PS1 USB
PREV NEXT
PS2
Control Panel
2b3b
2a4a
1b
4b
3a
5a 5b
1a
6
Having a problem? Call our free, 24-hour technical support hotline to speak with a live product specialist located right here in our facility. Tel: (+1) 613 • 652 • 4886 Email: [email protected]
1Connect the DVI Cable to the DVI port on the back of the Touchscreen Display.Connect the other end of the DVI Cable to the DVI port on the back of the Control Panel.
DVI Cable1a
1b
?Connect an LCD monitor (not provided by Ross Video) to the DVI port on the back of the Control Panel according to the manufacturer’s instructions.
Proceed to Step 5.
No Touchscreen Display?
2Plug the USB Cable into the USB port on the back of the Touchscreen Display.Plug the other end of the USB Cable into the bottom USB port on the back of the Control Panel.
USB Cable2a
2b
3Plug the Control Cable into the PREV port on the back of the Touchscreen Display.
Plug the other end of the Control Cable into the External Link 1 port on the back of the Control Panel.
Control Cable3a
3b
Touchscreen Control Cabling
4Connect the DC Power Cord from the AC Power Adapter to the PS1 port on the back of the Touchscreen Display.
If you have a redundant AC Power Adapter option, connect it to the PS2 port.
4a
4b
Connect the AC Power Cord to the AC port on the back of the Control Panel.
If you have the redundant power supply option, connect the second AC Power Cord to the second AC port.
5a
5b
5 6Connect the AC Power Cords to the PS ports on the back of the QMD or QMD-X Frame for each Power Supply installed in your Frame.
7Connect all the AC Power Cords from the AC Power Adapters and frame to electrical outlets.
Power Cabling
Caution: Before you set up and operate your switcher, see the “Important Safety Instructions” in your Engineering manual.
Warning: Always connect the AC Power Adapter to the Touchscreen Display before connecting to Mains Power.
Network Cabling and Setup
Printed In Canada
V I S I O N
Touchscreen Display
HOME
UPONE
HOLD
HOME
UPONE
HOLD
FRAME
FAIL
PANEL
FAIL
SYSTEM
POWER
EXIT ENTER
DISPLAY
F2 F3 F4 F5 F6 MOREF1
11b
11a
1615141312111098765431 2
1615141312111098765431 2
1615141312111098765431 2
REF
LOOPLOCK
CP
U
LAN1
10/100 10/100
LAN2GP I/O PERIPH1 PERIPH2 PERIPH3 PERIPH4 PANEL
USB
LTC A
B
E
OU
T
CIN
DIN
1615141312111098765431 2
IN
PS
2P
S 1
1
2
MAXIMUMRATING1950W
100-
120V
~ 22
0-24
0V~
47-6
3Hz
9A 6
50W
(C
anad
a 12
0V~o
nly)
Upgrade Computer
Optional LAN2 Connection
OR
Local Area Network(subnet 1)
Local Area Network(optional subnet 2)
QMD or Octane/QMD-X Frame
Master Vision Control Panel
8b
8a
9
11d
12c
12d
8Plug a CAT5 Network Cable into the LAN port on the back of the Control Panel.
Plug a CAT5 Network Cable into the LAN1 port on the back of the QMD or Octane/QMD-X Frame.
Control Panel Cable
8a
8b
Network Cabling
13
If a message saying a Panel/Frame software version mismatch appears on the Main Menu, a Software Upgrade is required.
Contact Ross Video Technical Support for assistance.
Upgrade(if required)
12On the Upgrade Computer, open a web browser, and go to http://192.168.1.1 (default IP address)
Log in to the frame and click Network on the Other tab.
Frame Network Setup
12a
12bEnter the new IP Address, Network Mask, and Gateway of the Frame LAN 1 port. Optionally, you can enter the address of the LAN 2 port, but it must be on a different subnet.
12c
Enter the IP Address of the Vision Panel. This must be the same as set in Step 11d.
12d
Click Change and Reboot.12e
11Press HOME three times.
Tap Setup More Network Setup to show the Network Setup Menu.
Enter the new IP Address, Subnet Mask, and Gateway of the Panel.
Master Control Panel Network Setup
11a11b
11c11d
11e
11f
Enter the IP Address of the Frame. This does not set the IP Address of the frame, but tells the panel the address the frame is at.
Use the Panel ID knob to select Master Panel.
Tap Save, and Yes.
Network Setup (only if your frame is not set to the default IP Address)
?If you are setting up a MultiPanel configuration, set up the Master Panel first, and then refer to the Vision Manuals for information on setting up Satellite Panels.
MultiPanel Setup
9Plug a CAT5 Network Cable into the ethernet port of the Upgrade Computer.
The Upgrade Computer can be any computer with a network connection and a web browser.
Upgrade Computer
10See the Vision Manuals for information on powering up your switcher.
Power Up Switcher