Cable Rollers - Cable Laying Equipment - Cable Handling Equipment
Click here to load reader
-
Upload
reid-brothers-uk -
Category
Technology
-
view
842 -
download
0
description
Transcript of Cable Rollers - Cable Laying Equipment - Cable Handling Equipment
6 Straight line cable / pipe rollersThe SLR1 is a compact cable roller for use in narrow trenches and/or in confined areas and suitable for cables up to 90mm.
The SLR2 bridge style cable roller is principally the same as the SLR1 but with the added benefit of being able to stand over existing cables or objects in the trench.
The SLR3 is an economical yet versatile and very compact cable roller for use in narrow trenches or secured on cable trays/gantries. Due to the design, this can also be used as a pipe roller for diameters of up to 200mm.
The SLR4 is a heavy duty cable roller for use in most cable laying applications and suitable for cables up to 130mm. Note – for the heaviest of cables, the Diablo roller can be substituted for a heavy duty parallel roller.
The SLR5 cable roller is principally the same as the SLR4 but with the added benefit of being able to bridge existing cables or objects already in the trench.
The SLR6 is an economical yet versatile cable roller for use in trenches, secured on cable trays or bolted down as a materials roller. Due to the design, this can also be used as a pipe roller.
For full roller specifications
Straight line cable / pipe rollers 6 The SLR7 is an heavy duty straight line cable roller, this roller is unique in that all edges are rounded to prevent the cable being damaged if for example the roller flips over etc. Due to the base size, this cable roller is also suitable for ladder racks and gantries.
The SLR8 is an heavy duty super bridge style cable roller. The design allows for the roller to be placed over multiple cables and also has the added benefit of a high elevation of the cable.
The SLR9 Cable Roller is principally the same as the SLR4 but is fitted with a steel flat plate bottom for use on sand and soft ground conditions.
The SLR10 is a heavy duty cable roller similar to the SLR5 but suitable for cables up to 205mm. Note – For the heaviest of cables, the Diablo roller can be substituted for an heavy parallel roller.
HR1 Hanging Cable Roller enables cable to be installed and suspended in elevated positions. Suspension rollers can be supplied as shown or with a ‘pigs tail’ fixing for attaching to a staining wire. Rollers can be supplied with a heavier duty roller for taking the initial elevation strain.
go to www.tws-ltd.co.ukFor full roller specifications