CABLE HOLDER AND SUSPENSION SYSTEMS

Carl Stahl TECHNOCABLES - We guarantee quality, service and performance

2

The Carl Stahl TECHNOCABLES GmbH, member of the Carl Stahl Group, has been working with technical ropes and strandsfor decades and is today one of the world‘s market leaders in this field.

As a traditional German company, we place the highest value on quality. Utilizing our many years of experience in the fieldof wire rope technology we are constantly developing new products and solutions for a wide variety of industrial applica-tions.

For users in the field of ceiling suspensions, lights, fall arresters, acoustic elements, interior design, etc. we develop, produceand deliver suspension systems and their accessories. The Carl Stahl TECHNOCABLES team is always at your disposal.

ABOUT US

3

ÜBERSICHT LIEFERPROGRAMM

CABLE HOLDERfor rope –Ø 1,0 mm – 1,8 mm

Stepless adjustmentInstallation without toolsTime-saving installation

COMPLETE ROPESUSPENSION SETS

SUSPENSION CABLES

Many standard lengths & diameters in stock Of course we also produce ropes and cables individually according to your requirements.

Application examples can be found on pages 14 and 15.

Rope suspension sets can be adapted individually to your requirements.

PRODUCT PROGRAM

CABLE HOLDER

Female threadwith lateral run outDiameter: 10 mmLength: 33 mmThread depth: 7 mm

Item no.:M6 = SL000151M5 = SL000153M4 = SL000154

Male threadwith lateral run outDiameter: 10 mmLength: 41 mmThread length: 8 mm

Item no.:M6 = SL000155M5 = SL000156

Male threadstraight run outDiameter: 10 mmLength: 28 mmThread length: 8 mm

Item no.:M6 = SL000161M5 = SL000162

Item no.:M6 = SL000177*M5 = SL000178*M4 = SL000179*

with locknut

Item no.:M6 = SL000180*M5 = SL000181*

with locknut

Item no.:M6 = SL000182*M5 = SL000183*

with locknut

4

Item no.: SL000187*

LOOPfor quick production of arope loopWidth: 20 mmLength: 20 mm

Item no.:SL000167

HINTS

All cable holders are shown approximately in original size, unless otherwisespecified. All cable holders are made of nickel plated brass.Other surfaces, depending on quantity, are possible.All cable holders are TÜV-Süd certified.

*available on request

with locknut

5

Snap hookstraight run outsafety latchOpening: 7 mmLength: 28 mm

Item no.:SL000172


Eyeletstraight run outØ-Ring outside: 24 mmØ-Ring inside: 14 mmLength: 28 mm

Item no.:SL000173

3-Cable branchingstraight run outSuitable ropes page 11Diameter: 14 mmLength: 16 mm

Item no.:SL000158

4-Cable branchingstraight run outSuitable ropes page 11Diameter: 14 mmLength: 16 mm

Item no.:SL000157

Hook straight run outsafety latchDiameter: 10.8 mmLength: 48.8 mm

Item no.: SL000121

SUITABLE COUPLING PARTS FOR OUR CABLE HOLDERS WITH M6 - MALE THREAD

Please consider the workload table onpage 9

Mounting clipfor NORDIC busbarBore: 10 mmWidth: 28 mmHeight: 10 mmLength: 30 mm

Item no.: SN000115

with locknut

Item no.: SL000193*

CABLE HOLDER

Busbar clip holderstraight run outGroove width: 1mmpossible sheetthickness: 1mmDiameter: 10 mmLength: 17 mm

Item no.: SL000192

6

CABLE HOLDER


Item no.:M6 = SL000188*M5 = SL000189*

Item no.:M6 = SL000190*M5 = SL000191*

with locknut with locknut

Swivel headmale threadwith lateral run outSwiveling about 180°Diameter: 10 mmLength: 46 mmThread length: 8 mm

Item no.:M6 = SL000168M5 = SL000169

Swivel headfemale threadwith lateral run outSwiveling about 180°Diameter: 10 mmLength: 44 mmThread length: 7 mm

Item no.:M6 = SL000170M5 = SL000171

Cable holder forY-suspension with slitwith lateral run out with slit andknurled screwDiameter: 10 mmLength: 37 mm

Item no.:

SL000163

Item no.:SL000184*

Item no.:SL000185*

Cable holder forY-suspension with borewith lateral run out with bore andknurled screwDiameter: 10 mmLength: 37 mm

Item no.:

SL000164

with locknut with locknut

7

CABLE HOLDER

Feel free to contact us!

Depending on project and quantity

we develop together with you your

specific cable holder.

+49 (0) 7162 4007- 2280

+49 (0) 7162 4007- 8827

[email protected]

www.carlstahltechnocables.com

You haven‘tfound yourcable holder?


Ceiling attachmentM13x1Female threadBore in the bottom: Ø 7 mmCollar diameter: 20 mmØ-Sleeve: 16 mmLength: 22 mm

Item no.: SL000175

Ceiling attachment M12x1Female threadwith slot 2.5 mmBore in the bottom: Ø 5 mmCollar diameter: 18 mmØ-Sleeve: 14 mmLength: 29 mm

Item no.: SL000166

Ceiling attachmentM10x1Female threadThread in the bottom: M6Collar diameter: 16 mmØ-Sleeve: 12 mmLength: 18 mm

Item no.: SL000159

Ceiling attachment M13x1Male threadwith straight run outFor width across flat: 14Collar diameter: 16 mmLength: 14 mm

Item no.: SL000176

Immersible M12x1Male threadwith straight run outCollar diameter: 14 mmLength: 18 mm

Item no.: SL000165

Ceiling attachment M10x1Male threadwith straight run outCollar diameter: 12 mmLength: 13 mm

Item no.: SL000160

Ceiling attachment M13x1Swiveling about 180° for sloped ceilingsHead diameter: 16 mmLength: 19 mm

Item no.: SL000174

Item no.: SL000186*

with locknut

8

CERTIFIED SECURITY

All our cable holders are of course TÜV-Süd certified.

Of course TÜV-Süd certified

Download the complete certificate under: www.carlstahltechnocables.com/download

9

CABLE HOLDERS / SUSPENSION ROPES

Nominal tensile strength = 1570 N/mm² (stainless steel) & 2400 N/mm² (galvanized steel)Material = Stainless steel or galvanized steelConstruction = 6x7- WSCEnd terminal = Zinc die-cast or pressed out of brass, stainless steel or galvanized steelOpen rope end = Thermally welded

Suspension cables must not be oiled or greased! For ropes with different specification, we don’t extend warranty.

a) Screw in the cable and lightly press the button.b) Feed the cable to the desired positon. It will lock automa- tically with a slight pull.c) The cable may be released by pressing the button and the cable holder may be adjusted freely on the cable.

Rope – Ø (mm)

Galvanized steel, 6x7-WSC

Max. working load (kg)

Stainless steel rope, 1.4401 (AISI 316), 6x7-WSC


Ø 1.00

SE000491

10 kg

SE000497

7 kg

Working load of cable holders is specified with safety factor 5:1!

Download detailed instruction manual under:https://www.carlstahl-technocables.com/downloads.html

Installation of cable holders

Specification standard suspension ropes

Ø 1.20

SE000492

15 kg

SE000498

10 kg

Ø 1.50

SE000494

22 kg

SE000499

19 kg

Ø 1.80

SE000496

28,5 kg

SE000500

24 kg

Rope – Ø (mm)

Galvanized steel, 6x7-WSC


Ø 1.00

-

-

Ø 1.20

SE000492

13 kg

Ø 1.50

SE000494

17 kg

Ø 1.80

SE000496

26.5 kg

Working load, rope types and rope diameters

Working load, rope types and rope diameters for cable holder SL000121

10

Swaged terminals Die-cast terminals

Basically, you can choose from the following types of rope end terminals:

PRE-ASSEMBLED SUSPENSION CABLES

As a wire rope manufacturer with our own cable factory and assembly shop with experience since 1885, we areyour expert in the field of steel cables and their applications.

In conjunction with our cable holders, we process ropes in the diameter range 1.0 - 1.8 mm. You choose from the materials stainless steel or galvanized steel. Other materials are available on request.

By this you will receive complete rope suspension solutions from Carl Stahl Technocables, consisting of pre-assembled ropes & cable holders, on request also packed as a complete set.

Everything from one single source: Carl Stahl TECHNOCABLES

11

Cable with ball Ø 6 mmcable - Ø 1.2 mm, galvanized steel

Any other length also available

Length in mm Item no.

1,5003,000

TC004305TC004990

Cable with ball Ø 3.5 mmcable - Ø 1.2 mm, galvani-zed steel for 3- and 4- cablebranching



5001,000

TC004709TC004710


Cable with sleeve Ø 5 x L 7mm cable - Ø 1.5 mm, galvanized steel



1,5003,000

TC005122TC005123

Cable with sleeve Ø 4 x L 4mm cable - Ø 1.5 mm, galvanized steel



1,5003,000

TC004151TC004152

Cable with soft eyecable - Ø 1.5 mm, galvani-zed steel

Rope with eyezinc diecastcable - Ø 1.2 mm, galvanizedbolt - Ø max.: 5.0 mmLength max.: 15.5 mm

B

Please indicate bolt - Ø andmeasure B according to yourrequirements. The dimension A isabout twice as large as measure B.

A

Ø

L

12

Feel free to contact us!Depending on project and quantitywe develop together with you your specific cable.

+49 (0) 7162 4007- 2280

+49 (0) 7162 4007- 8827

[email protected]


You haven‘t found yourcable?


Rope with drawbar eyeØ - inside 5.1 mmcable - Ø 1.2 mm, galvanized steel

Cable with thread M6x10cable - Ø 1.5 mm, galvanized steel

Rope with 2 x eyelet Ø - inside 5.4 mm cable - Ø 1.5 mm, galvanized steel

SPECIAL - spring rope with soft eyes

cable - Ø 1.6 mm, stainless steel

Length in mm

500

Item no.

TC004656


13

Feel free to contact us!Depending on project and quantity we develop together with you your specific suspension set.

+49 (0) 7162 4007- 2280

+49 (0) 7162 4007- 8827

[email protected]


You haven‘t found yourcombination?

READY ASSEMBLED SUSPENSION SETS

EXAMPLES OF USE

SL000155 combined with SL000172

Three and four cable branching in action…

14




SL000155 combined withSL000158 & SL000157

SL000161 combined withSL000158 & SL000157

15

EXAMPLES OF USE

Y-cable holder with slit and lock nutSuspension for NORDIC - conductor rail

Y-cable holder with bore LOOP – for the swift creation of a loop

Changes reserved / Reproduction of this brochure, even in part, is prohibited.

Carl Stahl TECHNOCABLES GmbHTobelstraße 273079 Süßen / Germany

+49 (0) 71 62 40 07- 2280+49 (0) 71 62 40 07- 88 [email protected]

Development, manufacturing and consultation from one source:

Carl Stahl TECHNOCABLES

CABLE HOLDER AND SUSPENSION SYSTEMS

Documents

Transcript of CABLE HOLDER AND SUSPENSION SYSTEMS