Cabinet Hardware Installation Instructions · 2019-05-02 · Cabinet Hardware Installation...
Transcript of Cabinet Hardware Installation Instructions · 2019-05-02 · Cabinet Hardware Installation...
![Page 1: Cabinet Hardware Installation Instructions · 2019-05-02 · Cabinet Hardware Installation Instructions 310) 374-5700 Recommended Tools (not included) 3/16” Drill bit #2 Phillips](https://reader033.fdocuments.us/reader033/viewer/2022050108/5fac1a35dfaf13024c209720/html5/thumbnails/1.jpg)
If you have any questions about how to install your hardware, please call us directly at (310) 374-5700 or contact us at [email protected].
Cabinet Hardware Installation Instructions
310) 374-5700 www.architecturalmailboxes.com
Recommended Tools (not included)
3/16” Drill bit
#2 Phillips screwdriver
Power drill
Pencil
1 Locate area of installation. *For pulls, measure the center to center hole distance.
2
3
Ruler
Drill holes at each mark. *For best accuracy, drill slowly and apply light pressure.
Measure and mark the location of each hole with a ruler or tape measure. Check that the holes are level.
4Align holes on hardware with the drilled holes and secure with screws. ! DO NOT overtighten.
HARDWARE
-or- Tape Measure
(2) #8-32 screws, 1” length(2) #8-32 screws, 1.5” length
(1) #8-32 screws, 1” length(1) #8-32 screws, 1.5” length
For Knobs
For Pulls
© 2017, Architectural Mailboxes Rev I