CA Mainframe Application Tuner 9.0 1 CA RS 1306 Service List · ro54176 analysis of adabas activity...
Transcript of CA Mainframe Application Tuner 9.0 1 CA RS 1306 Service List · ro54176 analysis of adabas activity...
CA Mainframe Application Tuner 9.0 1
CA RS 1306 Service ListCA Mainframe Application Tuner 9.0 1
CA RS 1306 Service List
Release Service Description Hiper
9.0 RO51432 INCORRECT PERCENTAGE MODVIEW ANALYSIS IS SET TO ACTIVE
RO51434 BATCH REPORTING SYSOUT(*) NOT BEING HONORED
RO51497 ?UTRSAMP NOT UPDATED IN THE TUNBATCH JCL MEMBER
RO51583 DELAY PERCENTAGE TOTAL GT 100%
RO51759 TN0491E LEAVES A CONTROL BLOCK
RO51813 IMS PROBLEMS WITH DELAYVIEW AND CODEVIEW HIGH ACTIVITY
RO51897 GUI CSV: TRAN DATA TOTPCT NO DEC POINTS
RO51898 WAS MODE APPL SHOW ONLY LAST CHARS OF CLASS NAME
RO51899 WRONG DATASET DETAILS IN MAT GUI AND ISPF
RO51934 TASKVIEW CALLERID DOES NOT SHOW STATEMENTS
RO51999 PROVIDE CUSTOMIZATION FOR GUI
RO52083 GETINDEXPAGES 0 FOR 8K, 16K OR 32K BP
RO52112 GUI BULK APAR - FIXES AFTER REGRESSION TESTING
RO52113 WAS WEBSPHERE SQL STATEMENTS PER URL INCOMPLETE
RO52118 LOG ENTRY FOR EVERY EXIT IN TNMIIDMS MODULE
RO52155 PMA PROFILE NAME INCORRECT
RO52278 IDMS DML TARGET/QUALIFER INTERMITTENTLY SHOW GARBLED DATA
RO52542 TNMINIT ESTAE RECOVERY ROUTINE ABEND S0C6 IN TNSLOGM
RO52659 DB2 HARVESTED DATA MISSING
RO52737 GUI/SERVER BULK APAR - FIXES AFTER GA
RO52738 GUI/SERVER BULK APAR - FIXES AFTER GA
RO52789 VSAM I/O REPORTED AS OPEN/CLOSE/EOV
RO52823 WRONG CURSOR NAME IN CA MAT ISPF DB2 STATEMENT DETAILS VIEW
RO53014 ABEND0C1 IN MODULE APCSA008 AT +X'838'
RO53026 ABEND S0C4 IN TNEXSTP AT +X'2E2'
RO53148 CA MAT CSECT DESCRIPTION TYPOS
RO53156 UNNECESSARY LOG RECORDS FOR IMS
RO53201 ABEND0C9 IN APCYANAR AT +X'5F80'
RO53413 JCAMAT31 MEMBER MISSING FROM CEESDATV LIBRARY
RO53495 ISPF MESSAGES INCORRECT DURING INSTALL
RO53589 ABEND102 OR ABEND602 IN TNOCMDP
RO53644 CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE
RO54078 PROBLEM WITH CALLERID AND LISTINGS FROM IBM SAVERS SOURCE
RO54128 FILTERING ON ADABAS ACTIVITY DOES NOT WORK
RO54176 ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS
RO54388 A S0C4 ABEND OCCURS IN PROGRAM TNMECAT MEASUREMENT DB2
RO54551 TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO
RO54625 ADD SUPPORT FOR CICS CTS 5.1
RO55131 SAMPLES INCORRECTLY COMPUTED FOR DELAY VIEW GUI
RO55188 MONITOR VIEW OPENS INCORRECT LATEST ANALYSIS USING GUI
RO55438 ADD DIAGNOSTIC MODULE MAPPING TOOL
RO56654 TIMEZONE NOT SET IN CA MAT GUI SERVER
The CA RS 1306 service count for this release is 42
CA Mainframe Application Tuner 8.5 2
CA RS 1306 Service ListCA Mainframe Application Tuner 8.5 2
CA RS 1306 Service List
Release Service Description Hiper
8.5 RO51015 ADD CONFIGURATION FOR CA MAT ON MSM
RO53200 ABEND0C9 IN APCYANAR AT +X'5F80'
RO53587 ABEND102 OR ABEND602 IN TNOCMDP
RO53641 CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE
RO53966 APCIASDI IN/EXCLUDE CHECK FAILURE PMA
RO54022 S0C7 JOB APCIJM44 PGM APCIAM44 OFFSET +316
RO54549 TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO
RO54617 ADD SUPPORT FOR CICS CTS 5.1
RO54848 FILTERING ON ADABAS ACTIVITY DOES NOT WORK
RO54855 ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS
RO55199 REMOVE POINT AND SHOOT FIELD IMSVIEW FROM 2 PANELS
RO55249 WEBSPHERE APP/VIA CLASS VIEW PRECENTAGE ERROR
RO55251 INACCURATE PERCENTS ON DATACOM STATEMENTS PANEL
RO55290 TUNT3900 TRUNCATED DELAY TYPE
RO55297 PANEL TUNT5310 POINT AND SHOOT FIELD MODULE INACTV
RO55300 ADABAS VERSION LEVEL VERSION INCORRECT
RO55326 WEBSPHERE DELAY ACCOUNTABLES DISPLAY CLASSES PROBLEM
RO55329 CODEVIEW DETAIL - INVALID PRIMARY COMMAND
RO55330 WEBSPHERE SQL ISPF DISPLAY SQL LINE COMMAND DOES NOT WORK
RO55337 L COLUMN IN CODEVIEW FOR USS INCORRECT
RO55395 USS FUNCTION MVS PROGRAM NAME VALUE INCORRECT
RO55400 ENVIRONMENT SHOWS WRONG RELEASE LEVEL R 8.5 DISPLAYS R 4.2
RO55437 ADD DIAGNOSTIC MODULE MAPPING TOOL
RO55461 CSV AUTONAV NEXTEXEC WRONG DESCRIPTION
RO55584 CSV: MQ QUEUE NAME TRUNCATED
RO55689 TUNX2640 FILE SEGOUT NOT FREED
RO55690 MISSING HELP ON PANEL TUNW6410
RO56275 LKYN=Y DOES NOT WORK FOR CSV NO LINKLIST ENTRIES
RO56279 CSECT DESCRIPTION IS MISSING
RO56595 LISTING INCORRECT VIA CODEVIEW LISTING UNAVAILABLE
RO56804 CORRECT LONG NAMES FOR JVM TYPES
RO56852 INCORRECT PERCENTAGE COUNT IN 4GL HISTOGRAM VIEW.
RO56875 INCORRECT DBD
The CA RS 1306 service count for this release is 33
CA Mainframe Application Tuner 3
CA RS 1306 Service List for CEES850CA Mainframe Application Tuner 3
CA RS 1306 Service List for CEES850
FMID Service Description Hiper
CEES850 RO51015 ADD CONFIGURATION FOR CA MAT ON MSM
RO53587 ABEND102 OR ABEND602 IN TNOCMDP
RO53641 CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE
RO54549 TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO
RO54617 ADD SUPPORT FOR CICS CTS 5.1
RO54848 FILTERING ON ADABAS ACTIVITY DOES NOT WORK
RO54855 ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS
RO55199 REMOVE POINT AND SHOOT FIELD IMSVIEW FROM 2 PANELS
RO55249 WEBSPHERE APP/VIA CLASS VIEW PRECENTAGE ERROR
RO55251 INACCURATE PERCENTS ON DATACOM STATEMENTS PANEL
RO55290 TUNT3900 TRUNCATED DELAY TYPE
RO55297 PANEL TUNT5310 POINT AND SHOOT FIELD MODULE INACTV
RO55300 ADABAS VERSION LEVEL VERSION INCORRECT
RO55326 WEBSPHERE DELAY ACCOUNTABLES DISPLAY CLASSES PROBLEM
RO55329 CODEVIEW DETAIL - INVALID PRIMARY COMMAND
RO55330 WEBSPHERE SQL ISPF DISPLAY SQL LINE COMMAND DOES NOT WORK
RO55337 L COLUMN IN CODEVIEW FOR USS INCORRECT
RO55395 USS FUNCTION MVS PROGRAM NAME VALUE INCORRECT
RO55400 ENVIRONMENT SHOWS WRONG RELEASE LEVEL R 8.5 DISPLAYS R 4.2
RO55437 ADD DIAGNOSTIC MODULE MAPPING TOOL
RO55461 CSV AUTONAV NEXTEXEC WRONG DESCRIPTION
RO55584 CSV: MQ QUEUE NAME TRUNCATED
RO55689 TUNX2640 FILE SEGOUT NOT FREED
RO55690 MISSING HELP ON PANEL TUNW6410
RO56275 LKYN=Y DOES NOT WORK FOR CSV NO LINKLIST ENTRIES
RO56279 CSECT DESCRIPTION IS MISSING
RO56595 LISTING INCORRECT VIA CODEVIEW LISTING UNAVAILABLE
RO56804 CORRECT LONG NAMES FOR JVM TYPES
RO56852 INCORRECT PERCENTAGE COUNT IN 4GL HISTOGRAM VIEW.
RO56875 INCORRECT DBD
The CA RS 1306 service count for this FMID is 30
CA Mainframe Application Tuner 4
CA RS 1306 Service List for CEES900CA Mainframe Application Tuner 4
CA RS 1306 Service List for CEES900
FMID Service Description Hiper
CEES900 RO51432 INCORRECT PERCENTAGE MODVIEW ANALYSIS IS SET TO ACTIVE
RO51434 BATCH REPORTING SYSOUT(*) NOT BEING HONORED
RO51497 ?UTRSAMP NOT UPDATED IN THE TUNBATCH JCL MEMBER
RO51583 DELAY PERCENTAGE TOTAL GT 100%
RO51759 TN0491E LEAVES A CONTROL BLOCK
RO51813 IMS PROBLEMS WITH DELAYVIEW AND CODEVIEW HIGH ACTIVITY
RO51897 GUI CSV: TRAN DATA TOTPCT NO DEC POINTS
RO51898 WAS MODE APPL SHOW ONLY LAST CHARS OF CLASS NAME
RO51899 WRONG DATASET DETAILS IN MAT GUI AND ISPF
RO51934 TASKVIEW CALLERID DOES NOT SHOW STATEMENTS
RO51999 PROVIDE CUSTOMIZATION FOR GUI
RO52083 GETINDEXPAGES 0 FOR 8K, 16K OR 32K BP
RO52113 WAS WEBSPHERE SQL STATEMENTS PER URL INCOMPLETE
RO52118 LOG ENTRY FOR EVERY EXIT IN TNMIIDMS MODULE
RO52155 PMA PROFILE NAME INCORRECT
RO52278 IDMS DML TARGET/QUALIFER INTERMITTENTLY SHOW GARBLED DATA
RO52542 TNMINIT ESTAE RECOVERY ROUTINE ABEND S0C6 IN TNSLOGM
RO52659 DB2 HARVESTED DATA MISSING
RO52737 GUI/SERVER BULK APAR - FIXES AFTER GA
RO52789 VSAM I/O REPORTED AS OPEN/CLOSE/EOV
RO52823 WRONG CURSOR NAME IN CA MAT ISPF DB2 STATEMENT DETAILS VIEW
RO53026 ABEND S0C4 IN TNEXSTP AT +X'2E2'
RO53148 CA MAT CSECT DESCRIPTION TYPOS
RO53156 UNNECESSARY LOG RECORDS FOR IMS
RO53413 JCAMAT31 MEMBER MISSING FROM CEESDATV LIBRARY
RO53495 ISPF MESSAGES INCORRECT DURING INSTALL
RO53589 ABEND102 OR ABEND602 IN TNOCMDP
RO53644 CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE
RO54078 PROBLEM WITH CALLERID AND LISTINGS FROM IBM SAVERS SOURCE
RO54128 FILTERING ON ADABAS ACTIVITY DOES NOT WORK
RO54176 ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS
RO54388 A S0C4 ABEND OCCURS IN PROGRAM TNMECAT MEASUREMENT DB2
RO54551 TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO
RO54625 ADD SUPPORT FOR CICS CTS 5.1
RO55438 ADD DIAGNOSTIC MODULE MAPPING TOOL
RO56654 TIMEZONE NOT SET IN CA MAT GUI SERVER
The CA RS 1306 service count for this FMID is 36
CA Mainframe Application Tuner 5
CA RS 1306 Service List for CEES901CA Mainframe Application Tuner 5
CA RS 1306 Service List for CEES901
FMID Service Description Hiper
CEES901 RO52112 GUI BULK APAR - FIXES AFTER REGRESSION TESTING
RO52738 GUI/SERVER BULK APAR - FIXES AFTER GA
RO55131 SAMPLES INCORRECTLY COMPUTED FOR DELAY VIEW GUI
RO55188 MONITOR VIEW OPENS INCORRECT LATEST ANALYSIS USING GUI
The CA RS 1306 service count for this FMID is 4
CA Mainframe Application Tuner 6
CA RS 1306 Service List for CEET850CA Mainframe Application Tuner 6
CA RS 1306 Service List for CEET850
FMID Service Description Hiper
CEET850 RO53200 ABEND0C9 IN APCYANAR AT +X'5F80'
RO53966 APCIASDI IN/EXCLUDE CHECK FAILURE PMA
RO54022 S0C7 JOB APCIJM44 PGM APCIAM44 OFFSET +316
The CA RS 1306 service count for this FMID is 3
CA Mainframe Application Tuner 7
CA RS 1306 Service List for CEET900CA Mainframe Application Tuner 7
CA RS 1306 Service List for CEET900
FMID Service Description Hiper
CEET900 RO53014 ABEND0C1 IN MODULE APCSA008 AT +X'838'
RO53201 ABEND0C9 IN APCYANAR AT +X'5F80'
The CA RS 1306 service count for this FMID is 2
CA Mainframe Application Tuner 9.0 8
CA RS 1306 - PTF RO51432 DetailsCA Mainframe Application Tuner 9.0 8
CA RS 1306 - PTF RO51432 Details
Release Service Details9.0 RO51432 RO51432 M.C.S. ENTRIES = ++PTF (RO51432)
INCORRECT PERCENTAGE MODVIEW ANALYSIS IS SET TO ACTIVE
PROBLEM DESCRIPTION:
Incorrect percentages are being displayed in MODVIEW when the
Analysis is set to ACTIVE. (This is the MAT V9.0 version of RO49543)
SYMPTOMS:
When the Analysis option is set to ACTIVE some values on the
ModView panel in the pct column are wrong.
IMPACT:
Invalid percentage of activity is being reported.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 112
Copyright (C) 2012 CA. All rights reserved. R00057-EES090-SP1
DESC(INCORRECT PERCENTAGE MODVIEW ANALYSIS IS SET TO ACTIVE) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51432 )
CA Mainframe Application Tuner 9.0 9
CA RS 1306 - PTF RO51434 DetailsCA Mainframe Application Tuner 9.0 9
CA RS 1306 - PTF RO51434 Details
Release Service Details9.0 RO51434 RO51434 M.C.S. ENTRIES = ++PTF (RO51434)
BATCH REPORTING SYSOUT(*) NOT BEING HONORED
PROBLEM DESCRIPTION:
When running the batch reporting facility in CA MAT and specifying
a SYSOUT Class of '*', CA MAT is removing the '*'. This is causing
allocation of the DDNAME TUNREPT to be allocated to the default
output class as defined in the security product.
SYMPTOMS:
SYSOUT is not going to the Message Class as specified on the Jobcard
however is going to the default SYSOUT class defined in the security
product.
IMPACT:
The TUNREPT can go to the wrong SYSOUT class, resulting in unexpected
results. CA MAT continues to function.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 114
Copyright (C) 2012 CA. All rights reserved. R00059-EES090-SP1
DESC(BATCH REPORTING SYSOUT(*) NOT BEING HONORED) .
++VER (Z038)
FMID (CEES900)
SUP ( RO50081 TR50081 TR51434 )
CA Mainframe Application Tuner 9.0 10
CA RS 1306 - PTF RO51497 DetailsCA Mainframe Application Tuner 9.0 10
CA RS 1306 - PTF RO51497 Details
Release Service Details9.0 RO51497 RO51497 M.C.S. ENTRIES = ++PTF (RO51497)
?UTRSAMP NOT UPDATED IN THE TUNBATCH JCL MEMBER
PROBLEM DESCRIPTION:
TRCUST step 7 - (Create CA MAT batch report procedure) does not
update ?UTRSAMP in the Tunbatch JCL member
SYMPTOMS:
SYSPROC is not set correctly during product customization (still
shows ?UTRSAMP)
IMPACT:
Results in JCL error running TUNBATCH
CIRCUMVENTION:
Manually change ?UTRSAMP to the data set name of the customized
sample library that was created during product customization.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 9.0
CA MAT Base Component Release 8.5
Star Problem(s):
MATUNE 115
Copyright (C) 2012 CA. All rights reserved. R00061-EES090-SP1
DESC(?UTRSAMP NOT UPDATED IN THE TUNBATCH JCL MEMBER) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51497 )
CA Mainframe Application Tuner 9.0 11
CA RS 1306 - PTF RO51583 DetailsCA Mainframe Application Tuner 9.0 11
CA RS 1306 - PTF RO51583 Details
Release Service Details9.0 RO51583 RO51583 M.C.S. ENTRIES = ++PTF (RO51583)
DELAY PERCENTAGE TOTAL GT 100%
PROBLEM DESCRIPTION:
Data View panel shows Delay % total greater than 100%.
SYMPTOMS:
Data View panel shows Delay % total greater than 100%.
IMPACT:
The product remains usable. However, DataView presents mis-leading
or inaccurate information.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Applicaiton Tuner Release 09.0
Star Problem(s):
MATUNE 116
Copyright (C) 2012 CA. All rights reserved. R00063-EES090-SP1
DESC(DELAY PERCENTAGE TOTAL GT 100%) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50926 )
SUP ( TR51583 )
CA Mainframe Application Tuner 9.0 12
CA RS 1306 - PTF RO51759 DetailsCA Mainframe Application Tuner 9.0 12
CA RS 1306 - PTF RO51759 Details
Release Service Details9.0 RO51759 RO51759 M.C.S. ENTRIES = ++PTF (RO51759)
TN0491E LEAVES A CONTROL BLOCK
TN0491E LEAVES A CONTROL BLOCK
PROBLEM DESCRIPTION:
When monitoring a short running job such as IEFBR14, the job can
be ended before the monitor started.
CA Mainframe Application Tuner server issues
'TN0491E Target never located for profile: ________' message.
The problem is that a control block is not cleaned up correctly.
SYMPTOMS:
When 'TN0491E Target never located for profile: ________' message
is issued, the profile stays in 'waiting' status.
IMPACT:
The Monitor stays in 'waiting' status.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 97
Copyright (C) 2012 CA. All rights reserved. R00064-EES090-SP1
DESC(TN0491E LEAVES A CONTROL BLOCK) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51759 )
CA Mainframe Application Tuner 9.0 13
CA RS 1306 - PTF RO51813 DetailsCA Mainframe Application Tuner 9.0 13
CA RS 1306 - PTF RO51813 Details
Release Service Details9.0 RO51813 RO51813 M.C.S. ENTRIES = ++PTF (RO51813)
IMS PROBLEMS WITH DELAYVIEW AND CODEVIEW HIGH ACTIVITY
PROBLEM DESCRIPTION:
With MAT 9.0 testing BMPs from an IMS Tool called Bubba we noticed that a lot
of the WAIT% in delayview was being classified as unknown wait type. In 8.5
this same WAIT% looks to be going to IMS Statement delay. We also saw that
we may incorrectly identify wait/active mods.
When using DELAYVIEW or CODEVIEW to analyze an IMS BMP, the unknown delay
type seem excessively high, and suspicious high activity is seen in
modules such as DFSFLGGO.
SYMPTOMS:
High unknown delay time. Suspicious high
activity seen in some modules such as the
logger.
IMPACT:
Not all IMS SSA data will be seen.
Additionally some CodeView data may be
suspect.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
Star Problem(s):
MATUNE 120
Copyright (C) 2012 CA. All rights reserved. R00065-EES090-SP0
DESC(IMS PROBLEMS WITH DELAYVIEW AND CODEVIEW HIGH ACTIVITY) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50926 RO51260 )
SUP ( TR51813 )
CA Mainframe Application Tuner 9.0 14
CA RS 1306 - PTF RO51897 DetailsCA Mainframe Application Tuner 9.0 14
CA RS 1306 - PTF RO51897 Details
Release Service Details9.0 RO51897 RO51897 M.C.S. ENTRIES = ++PTF (RO51897)
GUI CSV: TRAN DATA TOTPCT NO DEC POINTS
PROBLEM DESCRIPTION:
Tran Data Details view in the CA MAT Eclipse Pluging shows Delay% as
rounded integer value without decimal points, which is different than
the view in the CA MAT ISPF client.
SYMPTOMS:
Different Tran Data Details Delay% values in the CA MAT Eclipse plugin
and CA MAT ISPF client.
IMPACT:
Different Delay% values.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Eclipse Plugin Release 9.0
Star Problem(s):
MATUNE 123
Copyright (C) 2012 CA. All rights reserved. R00066-EES090-SP1
DESC(GUI CSV: TRAN DATA TOTPCT NO DEC POINTS) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51897 )
CA Mainframe Application Tuner 9.0 15
CA RS 1306 - PTF RO51898 DetailsCA Mainframe Application Tuner 9.0 15
CA RS 1306 - PTF RO51898 Details
Release Service Details9.0 RO51898 RO51898 M.C.S. ENTRIES = ++PTF (RO51898)
WAS MODE APPL SHOW ONLY LAST CHARS OF CLASS NAME
PROBLEM DESCRIPTION:
The CA MAT Websphere Classes view (panel TUNT4420) show sometimes in the
column Class Name only the last characters of the name instead of
showing the name from the beginning. The issue occurs randomly,
sometimes all class names are shown as expected, starting from the
beginning of the name.
SYMPTOMS:
The Class Name column only contain the suffix of a class name.
IMPACT:
Lack of information, a Class Name suffix might give you not enough
information to see where the performance metrics belong to.
CIRCUMVENTION:
Enter line command NC to get the full class name.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 125
Copyright (C) 2012 CA. All rights reserved. R00068-EES090-SP1
DESC(WAS MODE APPL SHOW ONLY LAST CHARS OF CLASS NAME) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51898 )
CA Mainframe Application Tuner 9.0 16
CA RS 1306 - PTF RO51899 DetailsCA Mainframe Application Tuner 9.0 16
CA RS 1306 - PTF RO51899 Details
Release Service Details9.0 RO51899 RO51899 M.C.S. ENTRIES = ++PTF (RO51899)
WRONG DATASET DETAILS IN MAT GUI AND ISPF
PROBLEM DESCRIPTION:
The CA MAT Eclipse plugin shows different Dataset Detail values for
allocation information Unit, Primary and Secondary
SYMPTOMS:
Dataset Details, allocation information Unit, Primary and Secondary,
in the CA MAT Eclipse plugin, differ to the information displayed in
the CA MAT ISPF client.
IMPACT:
Different Dataset Details in CA MAT Eclipse plugin and CA MAT ISPF
client.
CIRCUMVENTION:
Use the allocation information from DataView.
PRODUCT(S) AFFECTED: CA MAT Eclipse Plugin Release 9.0
Star Problem(s):
MATUNE 124
Copyright (C) 2012 CA. All rights reserved. R00067-EES090-SP1
DESC(WRONG DATASET DETAILS IN MAT GUI AND ISPF) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51899 )
CA Mainframe Application Tuner 9.0 17
CA RS 1306 - PTF RO51934 DetailsCA Mainframe Application Tuner 9.0 17
CA RS 1306 - PTF RO51934 Details
Release Service Details9.0 RO51934 RO51934 M.C.S. ENTRIES = ++PTF (RO51934)
TASKVIEW CALLERID DOES NOT SHOW STATEMENTS
CallerId opened from Task View does not display statement numbers and
aggregate
lines by statement, even when a listing is correctly registered. CallerId
opened
from for example Code View does this.
Problem is only in 9.0, caused by a recent code change.
PROBLEM DESCRIPTION:
aggregate
lines by statement, even when a listing is correctly registered. CallerId
opened
from for example Code View does this.
SYMPTOMS:
CallerId opened from elsewhere than CodeView does not show statement info
IMPACT:
CallerId is inconsistent when opened from different screens, making it less
credible
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 126
Copyright (C) 2012 CA. All rights reserved. R00071-EES090-SP1
DESC(TASKVIEW CALLERID DOES NOT SHOW STATEMENTS) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50926 )
SUP ( TR51910 TR51933 TR51934 )
CA Mainframe Application Tuner 9.0 18
CA RS 1306 - PTF RO51999 DetailsCA Mainframe Application Tuner 9.0 18
CA RS 1306 - PTF RO51999 Details
Release Service Details9.0 RO51999 RO51999 M.C.S. ENTRIES = ++PTF (RO51999)
PROVIDE CUSTOMIZATION FOR GUI
PROBLEM DESCRIPTION:
During development, the GUI was not added to the standard CA MAT
customization process (TRCUST).
SYMPTOMS:
No step available to customize GUI in TRCUST.
IMPACT:
Manually customized elements may be over-written during the application
of product maintenance.
CIRCUMVENTION:
Customers must save any customized elements prior to applying maintenance.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 127
Copyright (C) 2012 CA. All rights reserved. R00072-EES090-SP1
DESC(PROVIDE CUSTOMIZATION FOR GUI) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51999 )
CA Mainframe Application Tuner 9.0 19
CA RS 1306 - PTF RO52083 DetailsCA Mainframe Application Tuner 9.0 19
CA RS 1306 - PTF RO52083 Details
Release Service Details9.0 RO52083 RO52083 M.C.S. ENTRIES = ++PTF (RO52083)
GETINDEXPAGES 0 FOR 8K, 16K OR 32K BP
PROBLEM DESCRIPTION:
Get Index Pages (GETINDEXPAGES) is zero when used with an 8K,
16K or 32K buffer pool.
SYMPTOMS:
CA MAT does not show the GetIndexPages or GetIndexPages shows as zero.
IMPACT:
Incorrect output is displayed.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 121
Copyright (C) 2012 CA. All rights reserved. R00073-EES090-SP1
DESC(GETINDEXPAGES 0 FOR 8K, 16K OR 32K BP) .
++VER (Z038)
FMID (CEES900)
SUP ( TR52083 )
CA Mainframe Application Tuner 9.0 20
CA RS 1306 - PTF RO52112 DetailsCA Mainframe Application Tuner 9.0 20
CA RS 1306 - PTF RO52112 Details
Release Service Details9.0 RO52112 RO52112 M.C.S. ENTRIES = ++PTF (RO52112)
GUI BULK APAR - FIXES AFTER REGRESSION TESTING
Gui apar fixing issues found (mostly) during regression testing of GA PAX
file:
21184841-1 - P4 - Ga Function Synchronize
21184822-1 - P4 - Ga Analysis Req Not Canceled
21184802-1 - P4 - Ga Data Details Command
21184792-1 - P4 - Ga Description In Adabas View
21180306-1 - P4 - Listing Cmd From Delaylocation
20643274-1 - P4 - Bug In Focus Change After F1
21173160-1 - P3 - Beta Problem Analysing Gui
21184790-1 - P4 - Ga Websphere Sql Stmts Trans.
21177378-1 - P4 - Ga Gui Extended Details
21177367-1 - P4 - Ga Gui Missing Code Details
21173293-1 - P3 - Beta Explain Data Not On Gui
21186327-1 - P4 - Ga Gui PoolView Data Sets command
21184788-1 - P4 - Ga Websphere Sql Details
PROBLEM DESCRIPTION:
attached issues
SYMPTOMS:
This is a set of fixes, individual problems fixed are described in the
attached issues
IMPACT:
Mostly low-severity issues, but one issue (21173160) can make the GUI
unusable by making Analysis impossible
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 122
Copyright (C) 2012 CA. All rights reserved. R00074-EES090-SP1
DESC(GUI BULK APAR - FIXES AFTER REGRESSION TESTING) .
++VER (Z038)
FMID (CEES901)
PRE ( RO49764 RO50774 RO51551 )
SUP ( RO51220 TR49674 TR51076 TR51079 TR51129 TR51167
TR51220 TR52112 )
CA Mainframe Application Tuner 9.0 21
CA RS 1306 - PTF RO52113 DetailsCA Mainframe Application Tuner 9.0 21
CA RS 1306 - PTF RO52113 Details
Release Service Details9.0 RO52113 RO52113 M.C.S. ENTRIES = ++PTF (RO52113)
WAS WEBSPHERE SQL STATEMENTS PER URL INCOMPLETE
PROBLEM DESCRIPTION:
CA MAT ISPF analyze of a WebSphere monitor:
when line command S is selected for an URL in display mode URL then
the result shown in WebSphere SQL Statements might be incomplete, not
all available SQL statements are shown.
SYMPTOMS:
Not all SQLs associated with the selected URL are displayed.
IMPACT:
The result shown in the Websphere SQL statements view might be
incomplete.
CIRCUMVENTION:
Select display mode SQL to see all SQL statements for all URLs.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 128
Copyright (C) 2012 CA. All rights reserved. R00075-EES090-SP1
DESC(WAS WEBSPHERE SQL STATEMENTS PER URL INCOMPLETE) .
++VER (Z038)
FMID (CEES900)
SUP ( TR52113 )
CA Mainframe Application Tuner 9.0 22
CA RS 1306 - PTF RO52118 DetailsCA Mainframe Application Tuner 9.0 22
CA RS 1306 - PTF RO52118 Details
Release Service Details9.0 RO52118 RO52118 M.C.S. ENTRIES = ++PTF (RO52118)
LOG ENTRY FOR EVERY EXIT IN TNMIIDMS MODULE
PROBLEM DESCRIPTION:
When monitoring an IDMS online region, there is a log entry on the
CA Mainframe Application Tuner server for every monitor.
SYMPTOMS:
When monitoring an IDMS online region, there is a log entry on the
CA Mainframe Application Tuner server for every monitor.
IMPACT:
Low
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 118
Copyright (C) 2012 CA. All rights reserved. R00076-EES090-SP1
DESC(LOG ENTRY FOR EVERY EXIT IN TNMIIDMS MODULE) .
++VER (Z038)
FMID (CEES900)
SUP ( TR52118 )
CA Mainframe Application Tuner 9.0 23
CA RS 1306 - PTF RO52155 DetailsCA Mainframe Application Tuner 9.0 23
CA RS 1306 - PTF RO52155 Details
Release Service Details9.0 RO52155 RO52155 M.C.S. ENTRIES = ++PTF (RO52155)
PMA PROFILE NAME INCORRECT
PROBLEM DESCRIPTION:
When invoking CA MAT Analysis from the PMA Measurement Overview
screen, the last profile name is displayed instead of APC.
SYMPTOMS:
The last profile name is displayed when invoking CA MAT Analysis from
PMA instead of APC.
IMPACT:
This is a cosmetic fix.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 113
Copyright (C) 2012 CA. All rights reserved. R00077-EES090-SP1
DESC(PMA PROFILE NAME INCORRECT) .
++VER (Z038)
FMID (CEES900)
SUP ( TR51433 TR52155 )
CA Mainframe Application Tuner 9.0 24
CA RS 1306 - PTF RO52278 DetailsCA Mainframe Application Tuner 9.0 24
CA RS 1306 - PTF RO52278 Details
Release Service Details9.0 RO52278 RO52278 M.C.S. ENTRIES = ++PTF (RO52278)
IDMS DML TARGET/QUALIFER INTERMITTENTLY SHOW GARBLED DATA
PROBLEM DESCRIPTION:
IDMS samples will intermittently show garbage or garbled characters
in the DML Target and DML Qualifier fields of the DML Delays panel.
SYMPTOMS:
IDMS DML Target and Qualifier fields can display garbage data.
IMPACT:
Data displayed on the DML Delays panel is incorrect.
CIRCUMVENTION:
There is no circumvention.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 111
Copyright (C) 2012 CA. All rights reserved. R00078-EES090-SP1
DESC(IDMS DML TARGET/QUALIFER INTERMITTENTLY SHOW GARBLED DATA) .
++VER (Z038)
FMID (CEES900)
SUP ( RO50885 RO51439 TR50885 TR51279 TR51439 TR52278 )
CA Mainframe Application Tuner 9.0 25
CA RS 1306 - PTF RO52542 DetailsCA Mainframe Application Tuner 9.0 25
CA RS 1306 - PTF RO52542 Details
Release Service Details9.0 RO52542 RO52542 M.C.S. ENTRIES = ++PTF (RO52542)
TNMINIT ESTAE RECOVERY ROUTINE ABEND S0C6 IN TNSLOGM
PROBLEM DESCRIPTION:
CA MAT abends with an 0C6 in TNSLOGM+X'3c7'.
SYMPTOMS:
0C6 abend in TNSLOGM+X'3C7'.
IMPACT:
High
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 130
Copyright (C) 2012 CA. All rights reserved. R00079-EES090-SP1
DESC(TNMINIT ESTAE RECOVERY ROUTINE ABEND S0C6 IN TNSLOGM) .
++VER (Z038)
FMID (CEES900)
SUP ( RO51759 TR51759 TR52542 )
CA Mainframe Application Tuner 9.0 26
CA RS 1306 - PTF RO52659 DetailsCA Mainframe Application Tuner 9.0 26
CA RS 1306 - PTF RO52659 Details
Release Service Details9.0 RO52659 RO52659 M.C.S. ENTRIES = ++PTF (RO52659)
DB2 HARVESTED DATA MISSING
PROBLEM DESCRIPTION:
Harvested data is missing when summarization is enabled for DB2 on
the first FETCH. This information includes CPU Time.
SYMPTOMS:
CPU time is missing from the first fetch encounters and CA MAT analysis
is showing only sampled data.
IMPACT:
Incorrect results are displayed.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 136
Copyright (C) 2012 CA. All rights reserved. R00080-EES090-SP1
DESC(DB2 HARVESTED DATA MISSING) .
++VER (Z038)
FMID (CEES900)
SUP ( TR52659 )
CA Mainframe Application Tuner 9.0 27
CA RS 1306 - PTF RO52737 DetailsCA Mainframe Application Tuner 9.0 27
CA RS 1306 - PTF RO52737 Details
Release Service Details9.0 RO52737 RO52737 M.C.S. ENTRIES = ++PTF (RO52737)
GUI/SERVER BULK APAR - FIXES AFTER GA
PROBLEM DESCRIPTION:
Various problems with the Mainframe Application Tuner GUI application.
- For the IDMS view, the column name contains additional character "%" (it
should not be Wait%).
- Two columns are missing - DML Delays (SSC Prog, Front-End).
- Temporary ISPF PROFILE data sets are not being deleted.
- Problems with the DEPLOY, runtime JCL, and option files:
- Errors in allocating multi-level paths
- Set values are not exported properly
- DD definition errors
- Some spelling errors
SYMPTOMS:
Various symptoms, IDMS DML Delays (SSC Prog and Front-End) are missing.
TSS7220E 102 J=MATSRVR A=userid VOL=vvvvvv ACC=SCRATCH DSN=...
TSS722E SCRATCH Access Not Granted to Dataset ....
Difficulty with installation of the GUI web server.
IMPACT:
Low
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 132
Copyright (C) 2012 CA. All rights reserved. R00081-EES090-SP1
DESC(GUI/SERVER BULK APAR - FIXES AFTER GA) .
++VER (Z038)
FMID (CEES900)
PRE ( RO49763 RO50773 )
SUP ( RO51168 TR51168 TR52737 )
++IF FMID(CEES901) REQ(RO52738) .
++HOLD (RO52737) SYSTEM FMID(CEES900)
REASON (ACTION ) DATE (13009)
COMMENT (
After SMP/E work is complete, the MAT GUI web server must be
reconfigured and redeployed for changes to take effect. Afterward,
the GUI can be updated with the patch file available through the
web server. For details, see the CA MAT Installation Guide (in
particular the documentation updates provided by PTF RI52361),
Chapter 7: Customization.
).
CA Mainframe Application Tuner 9.0 28
CA RS 1306 - PTF RO52738 DetailsCA Mainframe Application Tuner 9.0 28
CA RS 1306 - PTF RO52738 Details
Release Service Details9.0 RO52738 RO52738 M.C.S. ENTRIES = ++PTF (RO52738)
GUI/SERVER BULK APAR - FIXES AFTER GA
PROBLEM DESCRIPTION:
Various problems with the Mainframe Application Tuner GUI application.
- For the IDMS view, the column name contains additional character "%" (it
should not be Wait%).
- Two columns are missing - DML Delays (SSC Prog, Front-End).
- Temporary ISPF PROFILE data sets are not being deleted.
- Problems with the DEPLOY, runtime JCL, and option files:
- Errors in allocating multi-level paths
- Set values are not exported properly
- DD definition errors
- Some spelling errors
SYMPTOMS:
Various symptoms, IDMS DML Delays (SSC Prog and Front-End) are missing.
TSS7220E 102 J=MATSRVR A=userid VOL=vvvvvv ACC=SCRATCH DSN=...
TSS722E SCRATCH Access Not Granted to Dataset ....
Difficulty with installation of the GUI web server.
IMPACT:
Low
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 09.0
Star Problem(s):
MATUNE 132
Copyright (C) 2012 CA. All rights reserved. R00081-EES090-SP1
DESC(GUI/SERVER BULK APAR - FIXES AFTER GA) .
++VER (Z038)
FMID (CEES901)
PRE ( RO49764 RO50774 RO51551 )
SUP ( RO51220 RO52112 TR49674 TR51076 TR51079 TR51129
TR51167 TR51220 TR52112 TR52738 )
++IF FMID(CEES900) REQ(RO52737) .
++HOLD (RO52738) SYSTEM FMID(CEES901)
REASON (ACTION ) DATE (13009)
COMMENT (
After SMP/E work is complete, the MAT GUI web server must be
reconfigured and redeployed for changes to take effect. Afterward,
the GUI can be updated with the patch file available through the
web server. For details, see the CA MAT Installation Guide (in
particular the documentation updates provided by PTF RI52361),
Chapter 7: Customization.
).
CA Mainframe Application Tuner 9.0 29
CA RS 1306 - PTF RO52789 DetailsCA Mainframe Application Tuner 9.0 29
CA RS 1306 - PTF RO52789 Details
Release Service Details9.0 RO52789 RO52789 M.C.S. ENTRIES = ++PTF (RO52789)
VSAM I/O REPORTED AS OPEN/CLOSE/EOV
PROBLEM DESCRIPTION:
VSAM I/O is being displayed as Open/Close/EOV during MAT analysis processing
in the DelayView.
SYMPTOMS:
During analysis of a monitor session, MAT is showing an inflated Open/Close
EOV in the DelayView screen. This is because VSAM I/O is being added to
Open/Close/EOV.
IMPACT:
Incorrect results are displayed.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 139
Copyright (C) 2012 CA. All rights reserved. R00082-EES090-SP1
DESC(VSAM I/O REPORTED AS OPEN/CLOSE/EOV) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50926 )
SUP ( RO51583 TR51583 TR52789 )
CA Mainframe Application Tuner 9.0 30
CA RS 1306 - PTF RO52823 DetailsCA Mainframe Application Tuner 9.0 30
CA RS 1306 - PTF RO52823 Details
Release Service Details9.0 RO52823 RO52823 M.C.S. ENTRIES = ++PTF (RO52823)
WRONG CURSOR NAME IN CA MAT ISPF DB2 STATEMENT DETAILS VIEW
PROBLEM DESCRIPTION:
In the DB2 Statement Details view (displayed when line commad D is
selected in the DB2 View panel) the Cursor Name (if applicable) has
the same content as the previous information value.
Example:
Thread Count 534
Cursor Name 534
The problem occurs if the monitor dataset contains only sampled DB2
information for the SQL statement.
SYMPTOMS:
The Cursor Name shown in the DB2 Statement Details can be wrong.
IMPACT:
Wrong information is displayed.
CIRCUMVENTION:
Check for the cursor name in the related SQL statement which is
shown using line command S (Select SQL) or SD (Show Declare)
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 131
Copyright (C) 2012 CA. All rights reserved. R00083-EES090-SP1
DESC(WRONG CURSOR NAME IN CA MAT ISPF DB2 STATEMENT DETAILS VIEW) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50202 )
SUP ( TR52823 )
CA Mainframe Application Tuner 9.0 31
CA RS 1306 - PTF RO53014 DetailsCA Mainframe Application Tuner 9.0 31
CA RS 1306 - PTF RO53014 Details
Release Service Details9.0 RO53014 RO53014 M.C.S. ENTRIES = ++PTF (RO53014)
ABEND0C1 IN MODULE APCSA008 AT +X'838'
PROBLEM DESCRIPTION:
When using the Performance Management Assistant (PMA), a S0C1 or S0C4
abend may occur possibly resulting from a branch to location 0 or some
other odd storage location.
In addition this corrects an ABEND0C1 at offset +838 in module APCSA008.
SYMPTOMS:
A S0C1 or S0C4 abend when using the Performance Management Assistant (PMA).
IMPACT:
The Performance Management Assistant (PMA) abends
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 138
Copyright (C) 2012 CA. All rights reserved. R00085-EES090-SP1
DESC(ABEND0C1 IN MODULE APCSA008 AT +X'838') .
++VER (Z038)
FMID (CEET900)
SUP ( TR52858 TR53014 )
CA Mainframe Application Tuner 9.0 32
CA RS 1306 - PTF RO53026 DetailsCA Mainframe Application Tuner 9.0 32
CA RS 1306 - PTF RO53026 Details
Release Service Details9.0 RO53026 RO53026 M.C.S. ENTRIES = ++PTF (RO53026)
ABEND S0C4 IN TNEXSTP AT +X'2E2'
PROBLEM DESCRIPTION:
ABEND0C4 IN TNEXSTP AT +X'2E2' when R3 is pointing to a freed
JCT. TPROT was issued with the wrong storage key.
SYMPTOMS:
A system abend of S0C4-04 occurs in module TNEXSTP at offset
+x'2E2'. A SVC dump is taken and the server recovers.
IMPACT:
The server continues to function, however an ABEND0C4-04 occurs.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 146
Copyright (C) 2013 CA. All rights reserved. R00086-EES090-SP1
DESC(ABEND S0C4 IN TNEXSTP AT +X'2E2') .
++VER (Z038)
FMID (CEES900)
SUP ( TR53026 )
CA Mainframe Application Tuner 9.0 33
CA RS 1306 - PTF RO53148 DetailsCA Mainframe Application Tuner 9.0 33
CA RS 1306 - PTF RO53148 Details
Release Service Details9.0 RO53148 RO53148 M.C.S. ENTRIES = ++PTF (RO53148)
CA MAT CSECT DESCRIPTION TYPOS
PROBLEM DESCRIPTION:
Some csect descriptions in the module/csect description table have
spelling errors.
SYMPTOMS:
Misspelled csect descriptions.
IMPACT:
Low.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 129
Copyright (C) 2012 CA. All rights reserved. R00087-EES090-SP1
DESC(CA MAT CSECT DESCRIPTION TYPOS) .
++VER (Z038)
FMID (CEES900)
PRE ( RO49523 RO50037 RO50301 RO50926 )
SUP ( TR53148 )
++HOLD (RO53148) SYSTEM FMID(CEES900)
REASON (ACTION ) DATE (12349)
COMMENT (
After the APAR has been applied, please stop/restart your CA MAT Server
started task to get the changed Csect descriptions updated in your GIF
(Global Information File) dataset.
).
CA Mainframe Application Tuner 9.0 34
CA RS 1306 - PTF RO53156 DetailsCA Mainframe Application Tuner 9.0 34
CA RS 1306 - PTF RO53156 Details
Release Service Details9.0 RO53156 RO53156 M.C.S. ENTRIES = ++PTF (RO53156)
UNNECESSARY LOG RECORDS FOR IMS
PROBLEM DESCRIPTION:
Unnecessary CA MAT IMS log records may be written to the CA MAT
monitor file.
SYMPTOMS:
This problem would not be noticeable when analyzing a monitor file,
unless in the unlikely case that so many records were written that
it slows down analysis.
IMPACT:
Low, the product will continue to function.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 148
Copyright (C) 2013 CA. All rights reserved. R00089-EES090-SP1
DESC(UNNECESSARY LOG RECORDS FOR IMS) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50926 RO51260 )
SUP ( RO51813 TR51813 TR53156 )
CA Mainframe Application Tuner 9.0 35
CA RS 1306 - PTF RO53201 DetailsCA Mainframe Application Tuner 9.0 35
CA RS 1306 - PTF RO53201 Details
Release Service Details9.0 RO53201 RO53201 M.C.S. ENTRIES = ++PTF (RO53201)
ABEND0C9 IN APCYANAR AT +X'5F80'
PROBLEM DESCRIPTION:
ABEND0C9 occurs in module APCYANAR at offset x'5F80' when CPU time
exceeds what will fit into a 31bit register.
SYMPTOMS:
The PMA Scanner routine for the CA MAT Batch reports fails on an S0C9
abend.
IMPACT:
APCYJLST batch job fails on a S0C9 abend code.
CIRCUMVENTION:
Rename the monitor file to remove it from PMA, or delete the
monitor file.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 142
Copyright (C) 2013 CA. All rights reserved. R00090-EES090-SP1
DESC(ABEND0C9 IN APCYANAR AT +X'5F80') .
++VER (Z038)
FMID (CEET900)
SUP ( TR53201 )
CA Mainframe Application Tuner 9.0 36
CA RS 1306 - PTF RO53413 DetailsCA Mainframe Application Tuner 9.0 36
CA RS 1306 - PTF RO53413 Details
Release Service Details9.0 RO53413 RO53413 M.C.S. ENTRIES = ++PTF (RO53413)
JCAMAT31 MEMBER MISSING FROM CEESDATV LIBRARY
PROBLEM DESCRIPTION:
The WebSphere agent comes in two versions, one for WebSphere running
in 31-bit mode and one for 64-bit mode. When CA MAT V9 was packaged
for the GA release, the 31-bit agent was overlooked and was not
included.
SYMPTOMS:
The procedures outlined in Chapter 8 of the CA MAT Installation
Guide cannot be completed since there is no member named JCAMAT31
in the &HLQ.CEESDATV library.
IMPACT:
Customers running WebSphere in 31-bit mode will not be able to use
CA MAT to monitor their WebSphere applications.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 147
Copyright (C) 2012 CA. All rights reserved. R00092-EES090-SP1
DESC(JCAMAT31 MEMBER MISSING FROM CEESDATV LIBRARY) .
++VER (Z038)
FMID (CEES900)
SUP ( TR53152 TR53413 )
CA Mainframe Application Tuner 9.0 37
CA RS 1306 - PTF RO53495 DetailsCA Mainframe Application Tuner 9.0 37
CA RS 1306 - PTF RO53495 Details
Release Service Details9.0 RO53495 RO53495 M.C.S. ENTRIES = ++PTF (RO53495)
ISPF MESSAGES INCORRECT DURING INSTALL
PROBLEM DESCRIPTION:
The dataset name is not displayed when a message received about a dataset
not found. In addition, an incorrect message is display when
updating the table dataset during installation/customization. The
message indicates the table dataset is full and needs to be
compressed when the user does not have the sufficient access.
SYMPTOMS:
1. Missing dataset name when dataset is missing.
2. Incorrect message is displayed when insufficient security access
to the table dataset or UTRCUST dataset.
IMPACT:
Incorrect information is provided.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 140
Copyright (C) 2013 CA. All rights reserved. R00093-EES090-SP1
DESC(ISPF MESSAGES INCORRECT DURING INSTALL) .
++VER (Z038)
FMID (CEES900)
SUP ( TR53495 )
CA Mainframe Application Tuner 9.0 38
CA RS 1306 - PTF RO53589 DetailsCA Mainframe Application Tuner 9.0 38
CA RS 1306 - PTF RO53589 Details
Release Service Details9.0 RO53589 RO53589 M.C.S. ENTRIES = ++PTF (RO53589)
ABEND102 OR ABEND602 IN TNOCMDP
PROBLEM DESCRIPTION:
An abend S102 or S602 occurs in TNOCMDP when the user has logged off
or has been cancelled off the system while CA MAT is performing
work on behalf of a User's request. When MAT completes the
processing and issues a cross memory post to the non-existing user
a system abend 102 or 602 will occur.
SYMPTOMS:
An abend S102 or S602 occurs when the user has logged off. A system
dump is taken.
IMPACT:
No impact, the server recovers and a SVC dump is taken.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 149
Copyright (C) 2013 CA. All rights reserved. R00094-EES090-SP1
DESC(ABEND102 OR ABEND602 IN TNOCMDP) .
++VER (Z038)
FMID (CEES900)
SUP ( TR53589 )
CA Mainframe Application Tuner 9.0 39
CA RS 1306 - PTF RO53644 DetailsCA Mainframe Application Tuner 9.0 39
CA RS 1306 - PTF RO53644 Details
Release Service Details9.0 RO53644 RO53644 M.C.S. ENTRIES = ++PTF (RO53644)
CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE
PROBLEM DESCRIPTION:
When exporting a monitor file to a CSV (Spreadsheet) file, the
CA Datacom delay numbers are incorrect.
SYMPTOMS:
Incorrect output in the CSV file for CA Datacom delays.
IMPACT:
Incorrect output in the CSV file for CA Datacom delays.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 151
Copyright (C) 2013 CA. All rights reserved. R00095-EES090-SP1
DESC(CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE) .
++VER (Z038)
FMID (CEES900)
SUP ( TR53644 )
CA Mainframe Application Tuner 9.0 40
CA RS 1306 - PTF RO54078 DetailsCA Mainframe Application Tuner 9.0 40
CA RS 1306 - PTF RO54078 Details
Release Service Details9.0 RO54078 RO54078 M.C.S. ENTRIES = ++PTF (RO54078)
PROBLEM WITH CALLERID AND LISTINGS FROM IBM SAVERS SOURCE
PROBLEM DESCRIPTION:
When registering a COBOL listing from IBM SAVERS source unexpected
carriage control character can cause incorrect association of code
offsets with COBOL verbs with invalid statement numbers.
SYMPTOMS:
Callerid detail screen shows invalid offset and "0" statement number
from registered Cobol listing.
IMPACT:
Misleading callerid information is displayed.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 161
Copyright (C) 2013 CA. All rights reserved. R00098-EES090-SP1
DESC(PROBLEM WITH CALLERID AND LISTINGS FROM IBM SAVERS SOURCE) .
++VER (Z038)
FMID (CEES900)
SUP ( TR54078 )
CA Mainframe Application Tuner 9.0 41
CA RS 1306 - PTF RO54128 DetailsCA Mainframe Application Tuner 9.0 41
CA RS 1306 - PTF RO54128 Details
Release Service Details9.0 RO54128 RO54128 M.C.S. ENTRIES = ++PTF (RO54128)
FILTERING ON ADABAS ACTIVITY DOES NOT WORK
PROBLEM DESCRIPTION:
When running analysis on an Adabas monitor file and attempt to filter
either the DB ID or FILE #, nothing is displayed.
SYMPTOMS:
After entering a value to filter on either DB ID or FILE #, nothing
gets displayed.
IMPACT:
Unable to filter on DB ID or FILE #.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 162
Copyright (C) 2013 CA. All rights reserved. R00099-EES090-SP1
DESC(FILTERING ON ADABAS ACTIVITY DOES NOT WORK) .
++VER (Z038)
FMID (CEES900)
SUP ( TR54128 )
CA Mainframe Application Tuner 9.0 42
CA RS 1306 - PTF RO54176 DetailsCA Mainframe Application Tuner 9.0 42
CA RS 1306 - PTF RO54176 Details
Release Service Details9.0 RO54176 RO54176 M.C.S. ENTRIES = ++PTF (RO54176)
ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS
PROBLEM DESCRIPTION:
When running analysis on an Adabas monitor file, duplicate Adabas
statements may be displayed.
SYMPTOMS:
Multiple Adabas statements appear (same DB ID, File #, CMD, CMD-ID
with most likely different ACTV%, WAIT% and TOTL%.
IMPACT:
To get accurate information on the duplicate statements for a
command, you have to add the values together.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 163
Copyright (C) 2013 CA. All rights reserved. R00100-EES090-SP1
DESC(ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50926 )
SUP ( RO51583 RO52789 TR51583 TR52789 TR54176 )
CA Mainframe Application Tuner 9.0 43
CA RS 1306 - PTF RO54388 DetailsCA Mainframe Application Tuner 9.0 43
CA RS 1306 - PTF RO54388 Details
Release Service Details9.0 RO54388 RO54388 M.C.S. ENTRIES = ++PTF (RO54388)
A S0C4 ABEND OCCURS IN PROGRAM TNMECAT MEASUREMENT DB2
PROBLEM DESCRIPTION:
A S0C4 abend occurs in program TNMECAT when doing a measurement
with a DB2 trigger.
SYMPTOMS:
A S0C4 abend occurs in program TNMECAT. The log shows messages:
TE0029E TriTune SQL Information service ABEND S0C4-00000004
TE0029E Error occurred in PGM=TNMECAT
IMPACT:
CA MAT 9.0 fails with a S0C4 so the measurement is not completed.
CIRCUMVENTION:
There is no circumvention.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 166
Copyright (C) 2013 CA. All rights reserved. R00101-EES090-SP1
DESC(A S0C4 ABEND OCCURS IN PROGRAM TNMECAT MEASUREMENT DB2) .
++VER (Z038)
FMID (CEES900)
SUP ( TR54388 )
CA Mainframe Application Tuner 9.0 44
CA RS 1306 - PTF RO54551 DetailsCA Mainframe Application Tuner 9.0 44
CA RS 1306 - PTF RO54551 Details
Release Service Details9.0 RO54551 RO54551 M.C.S. ENTRIES = ++PTF (RO54551)
TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO
PROBLEM DESCRIPTION:
CA Mainframe Application Tuner displays from TranView are different than
those from DelayView and DataView because they are intended to be specific
to the transaction and they are based on sample data only. However, when
viewing the DB2 Statements from TranView after viewing DB2View, TranView
is inconsistent and may incorrectly show data from the Harvester with
Total Samps of zero.
SYMPTOMS:
- Issue an Analyze Normal on a monitor profile.
- Select Option 6 for TranView.
- Enter line command D on a TRAN to get to DelayView Detail.
- Tab to Data Delay and hit enter to get to DB2 Statements.
- From the DB2 Statements screen, page thru and you will NOT see the DB2
Statements from the Harvester with Total Samps of zero, which is correct.
- However, Issue an Analyze Normal on the same monitor profile.
- Select Option 10 for DB2View.
- PF3 to return to the Interactive Analysis menu.
- Select Option 6 for TranView.
- Enter line command D on a TRAN to get to DelayView Detail.
- Tab to Data Delay and hit enter to get to DB2 Statements.
- From the DB2 Statements screen, page thru and you will INCORRECTLY
see the DB2 Statements from the Harvester with Total Samps of zero.
IMPACT:
The TranView display is inconsistent.
CIRCUMVENTION:
After viewing the DB2View, the user would need to PF3 back to issue
the Analyze Normal on a monitor profile and then go to the Tranview.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 167
Copyright (C) 2013 CA. All rights reserved. R00102-EES090-SP1
DESC(TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO) .
++VER (Z038)
FMID (CEES900)
PRE ( RO50202 )
SUP ( TR54551 )
CA Mainframe Application Tuner 9.0 45
CA RS 1306 - PTF RO54625 DetailsCA Mainframe Application Tuner 9.0 45
CA RS 1306 - PTF RO54625 Details
Release Service Details9.0 RO54625 RO54625 M.C.S. ENTRIES = ++PTF (RO54625)
ADD SUPPORT FOR CICS CTS 5.1
PROBLEM DESCRIPTION:
CA MAT does not capture or report on CICS 6.8 CTS 5.1 information.
SYMPTOMS:
CICS CTS 5.1 statistics are not on the monitor file and therefore
are not being display within the analysis panels.
IMPACT:
CICS CTS 5.1 does not get monitored.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 165
Copyright (C) 2013 CA. All rights reserved. R00103-EES090-SP1
DESC(ADD SUPPORT FOR CICS CTS 5.1) .
++VER (Z038)
FMID (CEES900)
SUP ( TR54625 )
CA Mainframe Application Tuner 9.0 46
CA RS 1306 - PTF RO55131 DetailsCA Mainframe Application Tuner 9.0 46
CA RS 1306 - PTF RO55131 Details
Release Service Details9.0 RO55131 RO55131 M.C.S. ENTRIES = ++PTF (RO55131)
SAMPLES INCORRECTLY COMPUTED FOR DELAY VIEW GUI
PROBLEM DESCRIPTION:
When using the GUI, DELAY VIEW ignores wait samples with type 3/11
SYMPTOMS:
Wrong percentages are shown in DELAY VIEW
IMPACT:
Wrong percentages are shown in DELAY VIEW
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT GUI Release 9.0
Star Problem(s):
MATUNE 175
Copyright (C) 2013 CA. All rights reserved. R00105-EES090-SP1
DESC(SAMPLES INCORRECTLY COMPUTED FOR DELAY VIEW GUI) .
++VER (Z038)
FMID (CEES901)
PRE ( RO49764 RO50774 RO51551 RO52738 )
SUP ( RO51220 RO52112 TR49674 TR51076 TR51079 TR51129
TR51167 TR51220 TR52112 TR55131 )
++HOLD (RO55131) SYSTEM FMID(CEES901)
REASON (ACTION ) DATE (13050)
COMMENT (
After SMP/E work is complete, the MAT GUI web server must be
reconfigured and redeployed for changes to take effect. Afterward,
the GUI can be updated with the patch file available through the
web server. For details, see the CA MAT Installation Guide (in
particular the documentation updates provided by PTF RI52361),
Chapter 7: Customization.
).
CA Mainframe Application Tuner 9.0 47
CA RS 1306 - PTF RO55188 DetailsCA Mainframe Application Tuner 9.0 47
CA RS 1306 - PTF RO55188 Details
Release Service Details9.0 RO55188 RO55188 M.C.S. ENTRIES = ++PTF (RO55188)
MONITOR VIEW OPENS INCORRECT LATEST ANALYSIS USING GUI
PROBLEM DESCRIPTION:
When using the GUI, in some cases, the monitor tree view uses the wrong
measurement. Example, 2 measurements done, one before noon (11:30 AM) and
another after noon (12:30 PM). The GUI may pick the 11:30 AM measurement
as the last measurement.
SYMPTOMS:
User sees incorrect analysis.
IMPACT:
User sees incorrect analysis
CIRCUMVENTION:
Use the History command on a monitor, then select the latest measurement from
the list.
PRODUCT(S) AFFECTED: CA MAT GUI Release 9.0
Star Problem(s):
MATUNE 178
Copyright (C) 2013 CA. All rights reserved. R00106-EES090-SP1
DESC(MONITOR VIEW OPENS INCORRECT LATEST ANALYSIS USING GUI) .
++VER (Z038)
FMID (CEES901)
PRE ( RO49764 RO50774 RO51551 RO52738 RO55131 )
SUP ( RO51220 RO52112 TR49674 TR51076 TR51079 TR51129
TR51167 TR51220 TR52112 TR55188 )
++HOLD (RO55188) SYSTEM FMID(CEES901)
REASON (ACTION ) DATE (13051)
COMMENT (
After SMP/E work is complete, the MAT GUI web server must be
reconfigured and redeployed for changes to take effect. Afterward,
the GUI can be updated with the patch file available through the
web server. For details, see the CA MAT Installation Guide (in
particular the documentation updates provided by PTF RI52361),
Chapter 7: Customization.
).
CA Mainframe Application Tuner 9.0 48
CA RS 1306 - PTF RO55438 DetailsCA Mainframe Application Tuner 9.0 48
CA RS 1306 - PTF RO55438 Details
Release Service Details9.0 RO55438 RO55438 M.C.S. ENTRIES = ++PTF (RO55438)
ADD DIAGNOSTIC MODULE MAPPING TOOL
PROBLEM DESCRIPTION:
This adds the ability to display where the CA-MAT modules are loaded
for diagnostic purposes. This display may be requested by CA Support as
part of diagnosing a problem (it provides no information for tuning an
application).
SYMPTOMS:
This is used for diagnostic purposes only
IMPACT:
N/A
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 191
Copyright (C) 2013 CA. All rights reserved. R00108-EES090-SP1
DESC(ADD DIAGNOSTIC MODULE MAPPING TOOL) .
++VER (Z038)
FMID (CEES900)
SUP ( TR55438 )
CA Mainframe Application Tuner 9.0 49
CA RS 1306 - PTF RO56654 DetailsCA Mainframe Application Tuner 9.0 49
CA RS 1306 - PTF RO56654 Details
Release Service Details9.0 RO56654 RO56654 M.C.S. ENTRIES = ++PTF (RO56654)
TIMEZONE NOT SET IN CA MAT GUI SERVER
PROBLEM DESCRIPTION:
Time displayed in STDOUT/STDERR being displayed as GMT/UTC time
instead of local time after RO52737 and RO52738.
SYMPTOMS:
Messages have incorrect time being displayed.
IMPACT:
Messages have incorrect time being displayed.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA MAT Base Component Release 9.0
Star Problem(s):
MATUNE 203
Copyright (C) 2013 CA. All rights reserved. R00118-EES090-SP1
DESC(TIMEZONE NOT SET IN CA MAT GUI SERVER) .
++VER (Z038)
FMID (CEES900)
PRE ( RO49763 RO50773 RO52737 )
SUP ( TR56066 TR56654 )
CA Mainframe Application Tuner 8.5 50
CA RS 1306 - PTF RO51015 DetailsCA Mainframe Application Tuner 8.5 50
CA RS 1306 - PTF RO51015 Details
Release Service Details8.5 RO51015 RO51015 M.C.S. ENTRIES = ++PTF (RO51015)
ADD CONFIGURATION FOR CA MAT ON MSM
PROBLEM DESCRIPTION:
Unable to configure CA Mainframe Application Tuner using CA MSM Software
Configuration Services.
SYMPTOMS:
The deployment for CA Mainframe Application Tuner is not configurable.
IMPACT:
The product cannot be configured using CA MSM.
CIRCUMVENTION:
Configure the product manually using the instructions provided in the
Installation Guide.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 104
Copyright (C) 2013 CA. All rights reserved. R00096-EES085-SP1
DESC(ADD CONFIGURATION FOR CA MAT ON MSM) .
++VER (Z038)
FMID (CEES850)
SUP ( RO29916 TR29916 TR51015 )
++HOLD (RO51015) SYSTEM FMID(CEES850)
REASON (ENH ) DATE (13004)
COMMENT (
Configuration for MSM added
).
CA Mainframe Application Tuner 8.5 51
CA RS 1306 - PTF RO53200 DetailsCA Mainframe Application Tuner 8.5 51
CA RS 1306 - PTF RO53200 Details
Release Service Details8.5 RO53200 RO53200 M.C.S. ENTRIES = ++PTF (RO53200)
ABEND0C9 IN APCYANAR AT +X'5F80'
PROBLEM DESCRIPTION:
ABEND0C9 occurs in module APCYANAR at offset x'5F80' when CPU time
exceeds what will fit into a 31bit register.
SYMPTOMS:
The PMA Scanner routine for the CA MAT Batch reports fails on an S0C9
abend.
IMPACT:
APCYJLST batch job fails on a S0C9 abend code.
CIRCUMVENTION:
Rename the monitor file to remove it from PMA, or delete the
monitor file.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 142
Copyright (C) 2013 CA. All rights reserved. R00107-EES085-SP1
DESC(ABEND0C9 IN APCYANAR AT +X'5F80') .
++VER (Z038)
FMID (CEET850)
SUP ( RO29983 TR29983 TR53200 )
CA Mainframe Application Tuner 8.5 52
CA RS 1306 - PTF RO53587 DetailsCA Mainframe Application Tuner 8.5 52
CA RS 1306 - PTF RO53587 Details
Release Service Details8.5 RO53587 RO53587 M.C.S. ENTRIES = ++PTF (RO53587)
ABEND102 OR ABEND602 IN TNOCMDP
PROBLEM DESCRIPTION:
An abend S102 or S602 occurs in TNOCMDP when the user has logged off
or has been cancelled off the system while CA MAT is performing
work on behalf of a User's request. When MAT completes the
processing and issues a cross memory post to the non-existing user
a system abend 102 or 602 will occur.
SYMPTOMS:
An abend S102 or S602 occurs when the user has logged off. A system
dump is taken.
IMPACT:
No impact, the server recovers and a SVC dump is taken.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 149
Copyright (C) 2013 CA. All rights reserved. R00108-EES085-SP1
DESC(ABEND102 OR ABEND602 IN TNOCMDP) .
++VER (Z038)
FMID (CEES850)
SUP ( RO47235 TR47235 TR53587 )
CA Mainframe Application Tuner 8.5 53
CA RS 1306 - PTF RO53641 DetailsCA Mainframe Application Tuner 8.5 53
CA RS 1306 - PTF RO53641 Details
Release Service Details8.5 RO53641 RO53641 M.C.S. ENTRIES = ++PTF (RO53641)
CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE
PROBLEM DESCRIPTION:
When exporting a monitor file to a CSV (Spreadsheet) file, the
CA Datacom delay numbers are incorrect.
SYMPTOMS:
Incorrect output in the CSV file for CA Datacom delays.
IMPACT:
Incorrect output in the CSV file for CA Datacom delays.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 151
Copyright (C) 2013 CA. All rights reserved. R00109-EES085-SP1
DESC(CA DATACOM DELAY TOTALS INCORRECT ON CSV FILE) .
++VER (Z038)
FMID (CEES850)
SUP ( TR53641 )
CA Mainframe Application Tuner 8.5 54
CA RS 1306 - PTF RO53966 DetailsCA Mainframe Application Tuner 8.5 54
CA RS 1306 - PTF RO53966 Details
Release Service Details8.5 RO53966 RO53966 M.C.S. ENTRIES = ++PTF (RO53966)
APCIASDI IN/EXCLUDE CHECK FAILURE PMA
PROBLEM DESCRIPTION:
Data import for the PMA IMS Info feature: In/Exclude functionality
does not work proper.
SYMPTOMS:
Excluded Systems/Transactions are taken or imported Sytems/Transactions
are not imported to the PMA IMS Info feature.
IMPACT:
Loss of data, or unwanted data imported to PMA.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 157
Copyright (C) 2013 CA. All rights reserved. R00112-EES085-SP1
DESC(APCIASDI IN/EXCLUDE CHECK FAILURE PMA) .
++VER (Z038)
FMID (CEET850)
SUP ( TR53966 )
CA Mainframe Application Tuner 8.5 55
CA RS 1306 - PTF RO54022 DetailsCA Mainframe Application Tuner 8.5 55
CA RS 1306 - PTF RO54022 Details
Release Service Details8.5 RO54022 RO54022 M.C.S. ENTRIES = ++PTF (RO54022)
S0C7 JOB APCIJM44 PGM APCIAM44 OFFSET +316
PROBLEM DESCRIPTION:
Job APCIJM44 abends with S0C7 during processing of MV IMS V4.6
records from date range 2012/12/31 to 2013/01/02.
SYMPTOMS:
Abend S0C7 Job APCIJM44 Step APCIAM44 Program APCIAM44 Offset +316
IMPACT:
Abend, loss of data.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 159
Copyright (C) 2013 CA. All rights reserved. R00113-EES085-SP1
DESC(S0C7 JOB APCIJM44 PGM APCIAM44 OFFSET +316) .
++VER (Z038)
FMID (CEET850)
SUP ( TR54022 )
CA Mainframe Application Tuner 8.5 56
CA RS 1306 - PTF RO54549 DetailsCA Mainframe Application Tuner 8.5 56
CA RS 1306 - PTF RO54549 Details
Release Service Details8.5 RO54549 RO54549 M.C.S. ENTRIES = ++PTF (RO54549)
TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO
PROBLEM DESCRIPTION:
CA Mainframe Application Tuner displays from TranView are different than
those from DelayView and DataView because they are intended to be specific
to the transaction and they are based on sample data only. However, when
viewing the DB2 Statements from TranView after viewing DB2View, TranView
is inconsistent and may incorrectly show data from the Harvester with
Total Samps of zero.
SYMPTOMS:
- Issue an Analyze Normal on a monitor profile.
- Select Option 6 for TranView.
- Enter line command D on a TRAN to get to DelayView Detail.
- Tab to Data Delay and hit enter to get to DB2 Statements.
- From the DB2 Statements screen, page thru and you will NOT see the DB2
Statements from the Harvester with Total Samps of zero, which is correct.
- However, Issue an Analyze Normal on the same monitor profile.
- Select Option 10 for DB2View.
- PF3 to return to the Interactive Analysis menu.
- Select Option 6 for TranView.
- Enter line command D on a TRAN to get to DelayView Detail.
- Tab to Data Delay and hit enter to get to DB2 Statements.
- From the DB2 Statements screen, page thru and you will INCORRECTLY
see the DB2 Statements from the Harvester with Total Samps of zero.
IMPACT:
The TranView display is inconsistent.
CIRCUMVENTION:
After viewing the DB2View, the user would need to PF3 back to issue
the Analyze Normal on a monitor profile and then go to the Tranview.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 167
Copyright (C) 2013 CA. All rights reserved. R00117-EES085-SP1
DESC(TRANVIEW SHOWS HARVESTER DATA WITH TOTAL SAMPS OF ZERO) .
++VER (Z038)
FMID (CEES850)
SUP ( TR54549 )
CA Mainframe Application Tuner 8.5 57
CA RS 1306 - PTF RO54617 DetailsCA Mainframe Application Tuner 8.5 57
CA RS 1306 - PTF RO54617 Details
Release Service Details8.5 RO54617 RO54617 M.C.S. ENTRIES = ++PTF (RO54617)
ADD SUPPORT FOR CICS CTS 5.1
PROBLEM DESCRIPTION:
CA MAT does not capture or report on CICS 6.8 CTS 5.1 information.
SYMPTOMS:
CICS CTS 5.1 statistics are not on the monitor file and therefore
are not being display within the analysis panels.
IMPACT:
CICS CTS 5.1 does not get monitored.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 141
Copyright (C) 2013 CA. All rights reserved. R00118-EES085-SP1
DESC(ADD SUPPORT FOR CICS CTS 5.1) .
++VER (Z038)
FMID (CEES850)
PRE ( RO32701 )
SUP ( TR54266 TR54617 )
CA Mainframe Application Tuner 8.5 58
CA RS 1306 - PTF RO54848 DetailsCA Mainframe Application Tuner 8.5 58
CA RS 1306 - PTF RO54848 Details
Release Service Details8.5 RO54848 RO54848 M.C.S. ENTRIES = ++PTF (RO54848)
FILTERING ON ADABAS ACTIVITY DOES NOT WORK
PROBLEM DESCRIPTION:
When running analysis on an Adabas monitor file and attempt to filter
either the DB ID or FILE #, nothing is displayed.
SYMPTOMS:
After entering a value to filter on either DB ID or FILE #, nothing
gets displayed.
IMPACT:
Unable to filter on DB ID or FILE #.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
Star Problem(s):
MATUNE 171
Copyright (C) 2013 CA. All rights reserved. R00119-EES085-SP1
DESC(FILTERING ON ADABAS ACTIVITY DOES NOT WORK) .
++VER (Z038)
FMID (CEES850)
SUP ( TR54848 )
CA Mainframe Application Tuner 8.5 59
CA RS 1306 - PTF RO54855 DetailsCA Mainframe Application Tuner 8.5 59
CA RS 1306 - PTF RO54855 Details
Release Service Details8.5 RO54855 RO54855 M.C.S. ENTRIES = ++PTF (RO54855)
ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS
PROBLEM DESCRIPTION:
When running analysis on an Adabas monitor file, duplicate Adabas
statements may be displayed.
SYMPTOMS:
Multiple Adabas statements appear (same DB ID, File #, CMD, CMD-ID
with most likely different ACTV%, WAIT% and TOTL%.
IMPACT:
To get accurate information on the duplicate statements for a
command, you have to add the values together.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
Star Problem(s):
MATUNE 170
Copyright (C) 2013 CA. All rights reserved. R00120-EES085-SP1
DESC(ANALYSIS OF ADABAS ACTIVITY DISPLAYS DUPLICATE STATEMENTS) .
++VER (Z038)
FMID (CEES850)
SUP ( RO52758 TR52758 TR54855 )
CA Mainframe Application Tuner 8.5 60
CA RS 1306 - PTF RO55199 DetailsCA Mainframe Application Tuner 8.5 60
CA RS 1306 - PTF RO55199 Details
Release Service Details8.5 RO55199 RO55199 M.C.S. ENTRIES = ++PTF (RO55199)
REMOVE POINT AND SHOOT FIELD IMSVIEW FROM 2 PANELS
PROBLEM DESCRIPTION:
The IMSview point and shoot field on the IMS Statements panel does not
function correctly.
SYMPTOMS:
When using the IMSview field the IMS TranNameView panel is displayed
incorrect because the return to the previous panel does not work.
The is also an error message visible: Invalid primary command
IMPACT:
The IMSview is a point and shoot field which when used should display the
IMS TranNameView panel.It does not function properly.
CIRCUMVENTION:
Use IMSVIEW,a global command in CA MAT to display the IMS TranNameView panel.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 176
Copyright (C) 2013 CA. All rights reserved. R00124-EES085-SP1
DESC(REMOVE POINT AND SHOOT FIELD IMSVIEW FROM 2 PANELS) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55199 )
CA Mainframe Application Tuner 8.5 61
CA RS 1306 - PTF RO55249 DetailsCA Mainframe Application Tuner 8.5 61
CA RS 1306 - PTF RO55249 Details
Release Service Details8.5 RO55249 RO55249 M.C.S. ENTRIES = ++PTF (RO55249)
WEBSPHERE APP/VIA CLASS VIEW PRECENTAGE ERROR
PROBLEM DESCRIPTION:
Wrong percentage is displayed for the 1st entry in a WAS monitor on
the WebSphere Classes panel.
SYMPTOMS:
On the WebSphere Classes panel the first entry has a much higher percent
than it should have. This is number is not accurate. This number is
higher than normal because other entries without a name are added
to the first entry.
IMPACT:
Misleading data displayed. The reports on Websphere Classes are not
accurate.
CIRCUMVENTION:
Using a D as Line command in front of the first entry will show the
real percent.
CA MAT v9.0 has this problem fixed.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 179
Copyright (C) 2013 CA. All rights reserved. R00127-EES085-SP1
DESC(WEBSPHERE APP/VIA CLASS VIEW PRECENTAGE ERROR) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55249 )
CA Mainframe Application Tuner 8.5 62
CA RS 1306 - PTF RO55251 DetailsCA Mainframe Application Tuner 8.5 62
CA RS 1306 - PTF RO55251 Details
Release Service Details8.5 RO55251 RO55251 M.C.S. ENTRIES = ++PTF (RO55251)
INACCURATE PERCENTS ON DATACOM STATEMENTS PANEL
PROBLEM DESCRIPTION:
Incorrect percentage can appear for Adabas, Datacom or Ideal in
either active or wait analyze mode.
SYMPTOMS:
When analyzing a monitor for any of the three in active or wait mode,
incorrect percentages which can be higher than 100% for the Total % column
can be displayed.
IMPACT:
Misleading information is displayed. This info cannot be used for an
accurate report on the Adabas or Datacom activity.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 180
Copyright (C) 2013 CA. All rights reserved. R00128-EES085-SP1
DESC(INACCURATE PERCENTS ON DATACOM STATEMENTS PANEL) .
++VER (Z038)
FMID (CEES850)
PRE ( RO33430 )
SUP ( RO54848 TR54848 TR55251 )
CA Mainframe Application Tuner 8.5 63
CA RS 1306 - PTF RO55290 DetailsCA Mainframe Application Tuner 8.5 63
CA RS 1306 - PTF RO55290 Details
Release Service Details8.5 RO55290 RO55290 M.C.S. ENTRIES = ++PTF (RO55290)
TUNT3900 TRUNCATED DELAY TYPE
PROBLEM DESCRIPTION:
When analyzing a monitor file using DelayView, and using the S line
command on the Major Category Unix System Services, the
Delay Distribution panel shows the Delay type being truncated.
SYMPTOMS:
The Delay Distribution panel shows the Delay type being truncated
IMPACT:
None
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 188
Copyright (C) 2013 CA. All rights reserved. R00129-EES085-SP1
DESC(TUNT3900 TRUNCATED DELAY TYPE) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55290 )
CA Mainframe Application Tuner 8.5 64
CA RS 1306 - PTF RO55297 DetailsCA Mainframe Application Tuner 8.5 64
CA RS 1306 - PTF RO55297 Details
Release Service Details8.5 RO55297 RO55297 M.C.S. ENTRIES = ++PTF (RO55297)
PANEL TUNT5310 POINT AND SHOOT FIELD MODULE INACTV
PROBLEM DESCRIPTION:
The MODule point and shoot field on the IDMS Delays panel does not function.
SYMPTOMS:
When using the MODule field CA MAT gives an error: Mode missing or invalid
At the command line CA MAT puts a text: MODE MODULE
IMPACT:
Cannot use the MODule point and shoot function on the IDMS Delays panel.
CIRCUMVENTION:
Instead of using the point and shoot MODule field, use MOD in command line
for the module list.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 177
Copyright (C) 2013 CA. All rights reserved. R00130-EES085-SP1
DESC(PANEL TUNT5310 POINT AND SHOOT FIELD MODULE INACTV) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55247 TR55297 )
CA Mainframe Application Tuner 8.5 65
CA RS 1306 - PTF RO55300 DetailsCA Mainframe Application Tuner 8.5 65
CA RS 1306 - PTF RO55300 Details
Release Service Details8.5 RO55300 RO55300 M.C.S. ENTRIES = ++PTF (RO55300)
ADABAS VERSION LEVEL VERSION INCORRECT
PROBLEM DESCRIPTION:
When running the Analysis on an Adabas monitor file and choose option 0
(OverView), the Adabas Level is displayed incorrectly.
SYMPTOMS:
The Adabas Level is displayed incorrectly as X.X.X, not X.X
IMPACT:
None, the analyis of the Adabas monitor file is not impacted.
CIRCUMVENTION:
NONE
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 182
Copyright (C) 2013 CA. All rights reserved. R00131-EES085-SP1
DESC(ADABAS VERSION LEVEL VERSION INCORRECT) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55300 )
CA Mainframe Application Tuner 8.5 66
CA RS 1306 - PTF RO55326 DetailsCA Mainframe Application Tuner 8.5 66
CA RS 1306 - PTF RO55326 Details
Release Service Details8.5 RO55326 RO55326 M.C.S. ENTRIES = ++PTF (RO55326)
WEBSPHERE DELAY ACCOUNTABLES DISPLAY CLASSES PROBLEM
PROBLEM DESCRIPTION:
Incorrect display of the delay accountable for WebSphere Classes.
SYMPTOMS:
Incorrect data displayed on the WebSphere Classes panel when trying to
display the delay cause. The delay is always Network and displayed red.
IMPACT:
Function to display the delay accountables on the Websphere Classes panel
not working. Incorrect delay accountables displayed for WebSphere Classes.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 183
Copyright (C) 2013 CA. All rights reserved. R00132-EES085-SP1
DESC(WEBSPHERE DELAY ACCOUNTABLES DISPLAY CLASSES PROBLEM) .
++VER (Z038)
FMID (CEES850)
PRE ( RO29679 )
SUP ( TR55326 )
CA Mainframe Application Tuner 8.5 67
CA RS 1306 - PTF RO55329 DetailsCA Mainframe Application Tuner 8.5 67
CA RS 1306 - PTF RO55329 Details
Release Service Details8.5 RO55329 RO55329 M.C.S. ENTRIES = ++PTF (RO55329)
CODEVIEW DETAIL - INVALID PRIMARY COMMAND
PROBLEM DESCRIPTION:
In CA MAT release 8.5, when analyzing a DB2 monitor dataset,
point-n-shoot version of the MODE command does not work on the CodeView
Detail panel
SYMPTOMS:
Point-n-shoot version of the MODE command doesn't work on the CodeView
detail panel. An error message "Invalid primary command" appears.
IMPACT:
When trying to use any option for the MOde command via point-n-shoot,
an error message "Invalid primary command" appears.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 189
Copyright (C) 2013 CA. All rights reserved. R00134-EES085-SP1
DESC(CODEVIEW DETAIL - INVALID PRIMARY COMMAND) .
++VER (Z038)
FMID (CEES850)
PRE ( RO42003 )
SUP ( TR55329 )
CA Mainframe Application Tuner 8.5 68
CA RS 1306 - PTF RO55330 DetailsCA Mainframe Application Tuner 8.5 68
CA RS 1306 - PTF RO55330 Details
Release Service Details8.5 RO55330 RO55330 M.C.S. ENTRIES = ++PTF (RO55330)
WEBSPHERE SQL ISPF DISPLAY SQL LINE COMMAND DOES NOT WORK
PROBLEM DESCRIPTION:
When viewing the WebSphere classes the display SQL line command does not
work.
SYMPTOMS:
On the Websphere classes panel the line command S to display the SQL for
any class doesn't return any SQL. A error message is displayed:
No data available.
IMPACT:
Unable to see any SQL associated with the Websphere classes. This results
in incomplete WebSphere reports.
CIRCUMVENTION:
None for CA MAT v8.5. For CA MAT v9.0 this problem is resolved.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 184
Copyright (C) 2013 CA. All rights reserved. R00135-EES085-SP1
DESC(WEBSPHERE SQL ISPF DISPLAY SQL LINE COMMAND DOES NOT WORK) .
++VER (Z038)
FMID (CEES850)
PRE ( RO29679 )
SUP ( TR55327 TR55330 )
CA Mainframe Application Tuner 8.5 69
CA RS 1306 - PTF RO55337 DetailsCA Mainframe Application Tuner 8.5 69
CA RS 1306 - PTF RO55337 Details
Release Service Details8.5 RO55337 RO55337 M.C.S. ENTRIES = ++PTF (RO55337)
L COLUMN IN CODEVIEW FOR USS INCORRECT
PROBLEM DESCRIPTION:
Incorrect display of A or B in the L column on the CodeView panel for
USS modules.
SYMPTOMS:
When analyzing a monitor of a USS workload, in the CodeView panel the
USS modules are displayed A(above 16Mb) or B(below 16Mb) on the L(location)
column. Modules from MVS are displayed correctly.
IMPACT:
Misleading information is displayed. This information cannot be used for
accurate reports. No functionality is lost.
CIRCUMVENTION:
None for CA MAT v8.5.
In CA MAT v9.0 the problem has been resolved.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 186
Copyright (C) 2013 CA. All rights reserved. R00136-EES085-SP1
DESC(L COLUMN IN CODEVIEW FOR USS INCORRECT) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55337 )
CA Mainframe Application Tuner 8.5 70
CA RS 1306 - PTF RO55395 DetailsCA Mainframe Application Tuner 8.5 70
CA RS 1306 - PTF RO55395 Details
Release Service Details8.5 RO55395 RO55395 M.C.S. ENTRIES = ++PTF (RO55395)
USS FUNCTION MVS PROGRAM NAME VALUE INCORRECT
PROBLEM DESCRIPTION:
In CA MAT release 8.5, when analyzing a monitor dataset using USSVIEW
(Option 9) and the Line Code F (Functions), if the Function name consists of
more than one word, the MVS Program name will be the second word of the
Function name rather than the MVS Program name.
SYMPTOMS:
Part of the Function name is displayed as the MVS Program name when using
the F Line Command in USSVIEW.
IMPACT:
The MVS Program name is not available.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 192
Copyright (C) 2013 CA. All rights reserved. R00137-EES085-SP1
DESC(USS FUNCTION MVS PROGRAM NAME VALUE INCORRECT) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55395 )
CA Mainframe Application Tuner 8.5 71
CA RS 1306 - PTF RO55400 DetailsCA Mainframe Application Tuner 8.5 71
CA RS 1306 - PTF RO55400 Details
Release Service Details8.5 RO55400 RO55400 M.C.S. ENTRIES = ++PTF (RO55400)
ENVIRONMENT SHOWS WRONG RELEASE LEVEL R 8.5 DISPLAYS R 4.2
PROBLEM DESCRIPTION:
In CA MAT release 8.5, go into the client and select the administration
option. There is an environment option on the displayed panel. When you
select that, the release number 4.2.01 is displayed
SYMPTOMS:
In CA MAT 8.5 select option A-Administration,I-Environment. In CA MAT
Information: Server Release - 4.2.01
IMPACT:
None
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA MAT Base Component Release 8.5
Star Problem(s):
MATUNE 187
Copyright (C) 2013 CA. All rights reserved. R00138-EES085-SP1
DESC(ENVIRONMENT SHOWS WRONG RELEASE LEVEL R 8.5 DISPLAYS R 4.2) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55400 )
CA Mainframe Application Tuner 8.5 72
CA RS 1306 - PTF RO55437 DetailsCA Mainframe Application Tuner 8.5 72
CA RS 1306 - PTF RO55437 Details
Release Service Details8.5 RO55437 RO55437 M.C.S. ENTRIES = ++PTF (RO55437)
ADD DIAGNOSTIC MODULE MAPPING TOOL
PROBLEM DESCRIPTION:
This adds the ability to display where the CA-MAT modules are loaded
for diagnostic purposes. This display may be requested by CA Support as
part of diagnosing a problem (it provides no information for tuning an
application).
SYMPTOMS:
This is used for diagnostic purposes only
IMPACT:
N/A
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 9.0
Star Problem(s):
MATUNE 191
Copyright (C) 2013 CA. All rights reserved. R00140-EES085-SP1
DESC(ADD DIAGNOSTIC MODULE MAPPING TOOL) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55437 )
CA Mainframe Application Tuner 8.5 73
CA RS 1306 - PTF RO55461 DetailsCA Mainframe Application Tuner 8.5 73
CA RS 1306 - PTF RO55461 Details
Release Service Details8.5 RO55461 RO55461 M.C.S. ENTRIES = ++PTF (RO55461)
CSV AUTONAV NEXTEXEC WRONG DESCRIPTION
PROBLEM DESCRIPTION:
In the CSV DelayView report of a monitor either with MQ, USS or IDMS
workload, the view name which is displayed in ISPF using the
Autonav function is wrong.
SYMPTOMS:
When creating a CSV report for MQ,USS or IDMS workload, the VISUAL
column displays inaccurate data.
IMPACT:
Inaccurate information displayed for the delay
CIRCUMVENTION:
None. Description of the field must be changed.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 193
Copyright (C) 2013 CA. All rights reserved. R00141-EES085-SP1
DESC(CSV AUTONAV NEXTEXEC WRONG DESCRIPTION) .
++VER (Z038)
FMID (CEES850)
SUP ( RO50617 TR49508 TR50617 TR55461 )
CA Mainframe Application Tuner 8.5 74
CA RS 1306 - PTF RO55584 DetailsCA Mainframe Application Tuner 8.5 74
CA RS 1306 - PTF RO55584 Details
Release Service Details8.5 RO55584 RO55584 M.C.S. ENTRIES = ++PTF (RO55584)
CSV: MQ QUEUE NAME TRUNCATED
PROBLEM DESCRIPTION:
In CA MAT release 8.5,in the CSV report, a Queue name which is longer
than 15 characters is truncated in MQ Queue Info.
SYMPTOMS:
MQ Queue name is truncated in CSV report.
IMPACT:
Only first 15 characters of Queue name are displayed in CSV report.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 197
Copyright (C) 2013 CA. All rights reserved. R00144-EES085-SP1
DESC(CSV: MQ QUEUE NAME TRUNCATED) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55584 )
CA Mainframe Application Tuner 8.5 75
CA RS 1306 - PTF RO55689 DetailsCA Mainframe Application Tuner 8.5 75
CA RS 1306 - PTF RO55689 Details
Release Service Details8.5 RO55689 RO55689 M.C.S. ENTRIES = ++PTF (RO55689)
TUNX2640 FILE SEGOUT NOT FREED
PROBLEM DESCRIPTION:
When analyzing a monitor file using DB2View, and using the D line
command, the DB2 Statement Detail panel is open. When exiting this panel
with END/F3, following message comes up: IKJ6247I FILE SEGOUT NOT FREED,
IS NOT ALLOCATED. This happens only when there is no SQL data in DB2
Statement Detail panel.
SYMPTOMS:
When there is no SQL data, exiting from the DB2 Statement Detail panel is
followed by error IKJ6247I FILE SEGOUT NOT FREED, IS NOT ALLOCATED.
IMPACT:
none.
CIRCUMVENTION:
none.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 190
Copyright (C) 2013 CA. All rights reserved. R00145-EES085-SP1
DESC(TUNX2640 FILE SEGOUT NOT FREED) .
++VER (Z038)
FMID (CEES850)
SUP ( RO54549 TR54549 TR55689 )
CA Mainframe Application Tuner 8.5 76
CA RS 1306 - PTF RO55690 DetailsCA Mainframe Application Tuner 8.5 76
CA RS 1306 - PTF RO55690 Details
Release Service Details8.5 RO55690 RO55690 M.C.S. ENTRIES = ++PTF (RO55690)
MISSING HELP ON PANEL TUNW6410
PROBLEM DESCRIPTION:
In CA MAT release 8.5, when trying to add new group(Group Definition-
panel TUNW6410), there is no response when pressing F1,no help
panel is displayed
SYMPTOMS:
No help panel is displayed when pressing F1 on the panel Group
Definition. Also after this on the panel Monitor Profile Groups is
displayed message "Help * not found"
IMPACT:
Help panel is not displayed
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 198
Copyright (C) 2013 CA. All rights reserved. R00146-EES085-SP1
DESC(MISSING HELP ON PANEL TUNW6410) .
++VER (Z038)
FMID (CEES850)
SUP ( TR55690 )
CA Mainframe Application Tuner 8.5 77
CA RS 1306 - PTF RO56275 DetailsCA Mainframe Application Tuner 8.5 77
CA RS 1306 - PTF RO56275 Details
Release Service Details8.5 RO56275 RO56275 M.C.S. ENTRIES = ++PTF (RO56275)
LKYN=Y DOES NOT WORK FOR CSV NO LINKLIST ENTRIES
PROBLEM DESCRIPTION:
In CA MAT release 8.5, linklist entries never show up in the
CSV file even if option Linklist=Y is set in the CSV Reports.
SYMPTOMS:
Linklist entries never show up in the CSV file.
IMPACT:
Linklist information is not included into the CSV report.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 194
Copyright (C) 2013 CA. All rights reserved. R00148-EES085-SP1
DESC(LKYN=Y DOES NOT WORK FOR CSV NO LINKLIST ENTRIES) .
++VER (Z038)
FMID (CEES850)
SUP ( RO50617 RO55461 TR49508 TR50617 TR55461 TR56275 )
CA Mainframe Application Tuner 8.5 78
CA RS 1306 - PTF RO56279 DetailsCA Mainframe Application Tuner 8.5 78
CA RS 1306 - PTF RO56279 Details
Release Service Details8.5 RO56279 RO56279 M.C.S. ENTRIES = ++PTF (RO56279)
CSECT DESCRIPTION IS MISSING
PROBLEM DESCRIPTION:
In CA MAT release 8.5, on the panel Delay locations, column
Csect Descriptions shows blank for some csect names
SYMPTOMS:
Column Csect Descriptions show blank
IMPACT:
No Csect description information for some csect names is displayed
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 199
Copyright (C) 2013 CA. All rights reserved. R00149-EES085-SP1
DESC(CSECT DESCRIPTION IS MISSING) .
++VER (Z038)
FMID (CEES850)
SUP ( TR56279 )
CA Mainframe Application Tuner 8.5 79
CA RS 1306 - PTF RO56595 DetailsCA Mainframe Application Tuner 8.5 79
CA RS 1306 - PTF RO56595 Details
Release Service Details8.5 RO56595 RO56595 M.C.S. ENTRIES = ++PTF (RO56595)
LISTING INCORRECT VIA CODEVIEW LISTING UNAVAILABLE
PROBLEM DESCRIPTION:
Listing of a module in codeview when doing analysis of a monitor is not
possible in some special cases.
SYMPTOMS:
When using line command 'L' to see the listing of a module in the codeview
of a monitor, the CA MAT client is displaying message 'Listing unavailable'
although the registration was done before and the listing is valid.
IMPACT:
Listing command in codeview of modules is not possible. CA MAT continues
to run normally.
CIRCUMVENTION:
Need to restart the CA MAT client or reregister the listing of that module.
PRODUCT(S) AFFECTED:
CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 212
Copyright (C) 2013 CA. All rights reserved. R00150-EES085-SP1
DESC(LISTING INCORRECT VIA CODEVIEW LISTING UNAVAILABLE) .
++VER (Z038)
FMID (CEES850)
PRE ( RO32378 RO47197 )
SUP ( RO29847 TR29847 TR56595 )
CA Mainframe Application Tuner 8.5 80
CA RS 1306 - PTF RO56804 DetailsCA Mainframe Application Tuner 8.5 80
CA RS 1306 - PTF RO56804 Details
Release Service Details8.5 RO56804 RO56804 M.C.S. ENTRIES = ++PTF (RO56804)
CORRECT LONG NAMES FOR JVM TYPES
PROBLEM DESCRIPTION:
Wrong JVM Method and Class names can show up in following JVM Views:
JVM Applications
JVM Methods
JVM Method Detail
Java Name
SYMPTOMS:
The JVM Method and Class names are displayed wrong at randomly
when the view is changed by switching between modes in the
JVM Applications panel.
IMPACT:
Wrong JVM Method and Class names can mislead in the interpretation of
JVM monitor results.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 216
Copyright (C) 2013 CA. All rights reserved. R00152-EES085-SP1
DESC(CORRECT LONG NAMES FOR JVM TYPES) .
++VER (Z038)
FMID (CEES850)
SUP ( TR56804 )
CA Mainframe Application Tuner 8.5 81
CA RS 1306 - PTF RO56852 DetailsCA Mainframe Application Tuner 8.5 81
CA RS 1306 - PTF RO56852 Details
Release Service Details8.5 RO56852 RO56852 M.C.S. ENTRIES = ++PTF (RO56852)
INCORRECT PERCENTAGE COUNT IN 4GL HISTOGRAM VIEW.
PROBLEM DESCRIPTION:
The percentage count in 4GL HISTOGRAM view is incorrect. The values
are higher than 100%.
SYMPTOMS:
Incorrect data is displayed. Percentages total greater than 100%.
IMPACT:
NONE
CIRCUMVENTION:
NONE
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 213
Copyright (C) 2013 CA. All rights reserved. R00153-EES085-SP1
DESC(INCORRECT PERCENTAGE COUNT IN 4GL HISTOGRAM VIEW.) .
++VER (Z038)
FMID (CEES850)
SUP ( TR56852 )
CA Mainframe Application Tuner 8.5 82
CA RS 1306 - PTF RO56875 DetailsCA Mainframe Application Tuner 8.5 82
CA RS 1306 - PTF RO56875 Details
Release Service Details8.5 RO56875 RO56875 M.C.S. ENTRIES = ++PTF (RO56875)
INCORRECT DBD
PROBLEM DESCRIPTION:
In CA MAT release 8.5,when displaying DBD Information for a particular
transaction, the wrong DBD name is shown in case if not matching PSB name
is found
SYMPTOMS:
When displaying DBD information for a particular transaction, wrong
DBD name is shown
IMPACT:
Incorrect DBD name is displayed
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA Mainframe Application Tuner Release 8.5
Star Problem(s):
MATUNE 196
Copyright (C) 2013 CA. All rights reserved. R00154-EES085-SP1
DESC(INCORRECT DBD) .
++VER (Z038)
FMID (CEES850)
SUP ( TR56875 )