CA Jobtrac Job Management 11.0 1 CA RS 1309 … · QO93496 Increase SPACE allocation for REXX...

CA Jobtrac Job Management 11.0 1

CA RS 1309 Service ListCA Jobtrac Job Management 11.0 1

CA RS 1309 Service List

Release Service Description Hiper

11.0 QO86119 CCPF TABLE ENTRIES BUILT INCORRECTLY

QO86694 JOBS AWAIT START CAUSE SPILL

QO87951 EVENT HIST SYS ABEND INCORRECT

QO88082 PARM WLMRSRC=YES CAUSES S0C4

QO88150 DEPENDENCY CODE "D" NOT DISPLAYED ON THE SED PANEL.

QO88188 EVENT DELETE FROM ISPF JT UI WITH CA-11 CAUSES S0C4

QO88266 ENVIRONMENTAL DEPENDENCIES DO NOT DISPLAY ON SED

QO88464 EXCLUDE ARCHIVED EVENTS FROM BUSGRP DISPLAY

QO88475 CORRECT S/D22 ABEND IN PROGRAMS ISSUING COMMANDS

QO88685 DUPLICATE EVENTS ON FUTURE SCHEDULE LOAD

QO88686 EDEP: ISPF ERROR ISPP353 FOR HELP PANEL "GJHENV6".

QO88873 AUTO-SCHD JOBS NOT PROCESSED

QO88890 X DEPENDENCY NOT REMOVED UNDER CERTAIN CIRCUMSTANCE

QO88992 MESSAGE 'TRAC020I' MAY BE ISSUED TWICE FOR A JOB.

QO89066 GJTRABTR: S0C3 IF EDEP WITH INVALID RETRY INTERVAL.

QO89470 MESSAGE ISPP121 FOR HELP PANEL 'GJHAUD1' ON MODEL2.

QO89471 Correct Prompt On Max Lines value in Global Options

QO89599 SYSOUT CAPTURE OPTIONS MAX LINES ENTRY 2 INCORRECT

QO89730 EVENTS NOT TRIGGERED DURING TABLE ACTIVATION

QO89757 KEY 8 CSA

QO89761 S0C2 IN GCSLOP RUNNING GJTRCONV OR GJTRMAJC

QO89777 S0C4 ABEND IN GJTRTSVD WHEN USING "F" LINE COMMAND.

QO89801 SYSOUT CAPTURE: LINE COUNT INCORRECT AFTER TRAC196A

QO89804 EVENTS ARCHIVED REGARDLESS OF T= PARAMETER VALUES

QO89805 SYSOUT CAPTURE FILE FULL AND CAN NOT ARCHIVE W/ARCH

QO89823 ISPF: S0C4 POSSIBLE WHEN DISPLAYING "PURGED" EVENT.

QO89824 GJTRMAJC MAY NOT ALWAYS DELETE OR LIST ALL MEMBERS.

QO89825 JOBTRAC START-UP PARAMETER "OPTS=NN" DOESN'T WORK.

QO89826 COMPLETION PROCESSING LOOPS IF SUCC EVENT = EVENT

QO89882 SUPPORT FOR NEW TOP-LINE COMMANDS VIEW AND VIEWDB.

QO89993 EXECUTION OF CMDSET CAUSES ABEND S0C4 IN GJTRAUTO.

QO90008 EXECUTION OF MVS COMMANDS FROM "CMDSETS" MAY FAIL.

QO90009 "D T" DEFINED FOR 0000, BUT ISSUED AT 0430

QO90010 SYSOUT CAPTURE: PREVENT LOOP FOR WTOR 'TRAC196A'.

QO90097 SCS (SYSTEM COMMAND SCHED.) COMMAND MAY BE SKIPPED.

QO90099 CYC/HOL CALENDAR ENTRIES DELETED IF NO DFLT EXISTS

QO90101 ABEND CODE MISSING FROM TRACWARN MESSAGE

QO90293 EDEP FEATURE: EDEP'S IMODS NEVER START TO EXECUTE.

QO90340 PRIMARY SELECTION COMMAND "D=" NOT WORKING PROPERLY

QO90341 EDEP NOT ADDED IF FINAL "/" NOT SPECIFIED ON ED=

QO90367 ENVIRONMENTAL DEPENDENCY ARG NOT PASSED TO IMOD

QO90382 ABENDS S978 AND S0C4 RELATED TO THE BUSGRP COMMAND.

QO90388 MESSAGE "EVENT CHANGE IGNORED" IF EVENT GOES LATE

QO90524 ABEND S0C9 IN GJTRAUTO MAY HAPPEN AFTER START-UP.

QO90615 EVENT STATUS REMAINS WAIT EXEC WHEN JOB IS PURGED

QO90653 INCORRECT FMID WILL BE LISTED ON GJTRJARC'S REPORTS

QO90654 ABEND S0C4 IN GJTRVWTR MAY HAPPEN DURING START-UP.

QO90742 PRIMARY SELECTION COMMAND "K=" NOT WORKING PROPERLY

QO90743 EVENT ADDED WITH GJTRABTR GETS "J" DEPENDENCY

QO90869 ORPHANED / DELETED DATA RESTORED DURING CONVERSION

QO90870 REPORTING INTERVAL IS INCORRECT IN REPORT GJTREZST

QO90871 GSO EVENT CALENDAR USES INCORRECT HOL/CYC CALENDAR

QO90888 SCL LOAD: GLOBAL CONTROLS @WORKD/@WDNNN DON'T WORK.

QO90918 Correct abend 0CA in GJTRDCOM

QO90928 STATUS: ALL ZEROS ARE SUPPRESSED FOR SOME % FIELDS.

QO90966 INTERVAL JOB MAY END EARLY IF ASAP TIME SPECIFIED




QO90968 MESSAGE GJTRJARP/012E-0036; IS NOT VALID SUPPL TYPE

QO91152 ARCHIVE TASK REMOVES ARGUMENTS FROM INTERVAL EVENTS

QO91153 RETRY FEATURE NOT WORKING FOR IMOD'S USED AS EDEP'S

QO91169 ABEND 80A-10 IN GSS ADDRESS SPACE

QO91172 TRACWARN MESSAGE DISPLAYED FOR NJE JOBS IMMEDIATELY

QO91255 ARCHIVE REPORT: ALWAYS SCHEDULED TIME SHOWN AS TIME

QO91414 ABEND S0C4 POSSIBLE AT SUBMISSION OF PANVALET JOBS.

QO91415 ABEND SD22-08 POSSIBLE WHEN EXECUTING SCS COMMANDS.

QO91417 FAILING STEP NUMBER INCORRECT ON TRACWARN MESSAGE.

QO91501 GET AND QUERY DON'T RETURN THE NEXT EVENT FOR V(N).

QO91533 TYPE 'E' INCORRECTLY USED AS DEFAULT FOR INTERVALS.

QO91582 GJTRABTR: GET/QUERY NOT CORRECT FOR GENERIC REQ'S.

QO91583 REVERSE CONVERSION: PRED COUNT MAY NOT BE CORRECT.

QO91597 THRESHOLDS T/S/A NOT CORRECT, EARLY ABORT POSSIBLE.

QO91598 ABORT PROCESSING POSSIBLE FOR TIME THRESHOLDS T/S.

QO91752 Support IPV6; Fix Interval Job Handling in email

QO91799 TRAC051E HAS INCORRECT ABEND

QO91800 *DYNAMIC*: NBR OF INCOMPLETE PREDECESSORS NOT SHOWN

QO91901 CHANGE FOR VARIABLE EMAIL SERVER PORT NUMBER.

QO91989 EMAIL SENT BY JOBTRAC DOESN'T DISPLAY BUSINESS GRP.

QO92219 SCL CONTINUATION DATES/PRED/SUCC/OSD/VER INCORRECT

QO92279 JOBS RUN IMMEDIATELY IF HOLIDAY ACTION IS N, P, OR W

QO92288 EVENTS W/HARDCODED VERSIONS MAY CAUSE VRSN CONFLICTS

QO92317 SCHEDULE LOAD LOOPS IF PROCESSING PERIOD IS @EVTNAME

QO92344 Change JOBTRA00 STATINVL to STATINTV

QO92430 Genlevel changed to SP01..

QO93493 S106-0C POSSIBLE IF DATACOM IS DOWN WHILE JT IS UP.

QO93494 SUBMIT POSSIBLE IF M-DEP SET WHILE AWAITING/SUBMIT.

QO93495 S0C7 ABEND MAY OCCUR FOR LINE COMMAND ON HIST PANEL

QO93496 Increase SPACE allocation for REXX samples

QO93639 CORRECT TRACMAC CONTINUATION CAUSING ASSEMBLY ERROR

QO93829 ABEND S878 MAY HAPPEN IF MANY CALENDARS ARE DEFINED

QO93831 S0C7 ABEND IN GJTRENF1 AFTER SUBMISSION OF NJE JOB.

QO93977 ADR/DSNS COMMAND DISPLAYS ACTION 'DCNT' AS 'PURG'.

QO93999 AMR SAVE FAILS IF MESSAGE ID IS DUPLICATED

QO94151 ISPF ERROR MESSAGE ISPP353 FOR HELP PANEL GJHSCC2.

QO94207 S0C7 ABEND CAN OCCUR AFTER RUN OR ADD CMD FOR ISPF.

QO94211 MODIFY CMD DEL (REL/PRG/ADD) NOT WORKING CORRECTLY.

QO94258 TRAC006I DOESN'T LIST EVENT NAME AFTER MODIFY/ADD=.

QO94369 MONITOR CMDS: EITHER NO DATA RETURNED OR ABEND S0C4

QO94373 YEAR NOT SHOWN IN VERSION ON EED, EHD AND NED PANEL

QO94398 MODIFY "F JT,DUMP" CAUSES ABEND S806 FOR GJTRDBIO.

QO94445 SED(ISPLAY) PANEL ALWAYS SHOWS "SUBMITTED 00:00".

QO94556 STEP LEVEL CC CHECK FOR "LE" NOT WORKING CORRECTLY.

QO94620 SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A.

QO94624 CAN'T RESET OPT "D" OF "CATALOG ERROR CHECK (2RUD)"

QO94653 NJE JOBS NOT TRACKED IF JT/R11 RUNS ON REMOTE NODE.

QO94774 MESSAGE TRAC014E MAY INCLUDE GARBAGE AS REASON CODE

QO94791 NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE

QO94801 SOME GARBAGE ON NJE EXECUTION DETAIL PANEL GJTREVNJ

QO94979 HIST: NO START TIME DISPLAYED FOR SCHEDULED SCL'S.

QO94981 NOTIFY/SEND MESSAGE INCLUDES DATA FROM PREVIOUS JOB

QO95046 ARCHIVE TASK CAN LEAVE ORPHANED "CCD" SUPPLEMENTS.

QO95063 "BUSGRP" TRUNCATED ON EASYTRIEVE'S REPORT GJTREZJS.

QO95098 SCS COMMANDS WON'T BE REPEATED IF INTERVAL IS GIVEN

QO95099 EMAIL LISTS ARCH/SCHD FOR JOBTRAC'S INTERNAL TASKS.




QO95152 GJTRJPRG DELETES NEWEST NOT OLDEST HISTORY ENTRIES.

QO95153 GJTRCYCL DOES NOT ADD/UPDATE CYCLIC CAL CORRECTLY

QO95200 S0C7 ABEND IN GJTRCTIM DURING JTS TABLE CONVERSION

QO95222 IEFU83 S0C7 IF ADR TRIGGER WITH PROC PER NOT DAILY

QO95269 INCORRECT PREDECESSOR VERSION ASSIGNED

QO95270 CHG SUCCESSORS DOES NOT CHG "P" DEP ON SUCC EVENT

QO95271 ISPF INTERFACE: LOCKOUT AFTER DELETE OF JTS TABLE.

QO95415 LOCKOUT POSS. IF TSO/DELETE PARALLEL TO COMPLETION.

QO95453 Conversion propagates previous HOL Cal entries

QO95454 Conversion propagates previous CYCLIC Cal entries

QO95503 AUTO-SCHED: MESSAGE TRAC024C IF JOB ALREADY EXISTS.

QO95504 STATUS "DELETED BY USERID" NOT SHOWN ON HIST PANEL.

QO95506 GJTRABTR: "POST" MAY BE REJECTED WITH RC=4 OR RC=8.

QO95520 AMR FEATURE: ABEND S0C4 POSSIBLE IN GJTRVMXT/GCSLIO

QO95549 S0C7 in Jobtrac 3.5 to r11 conversion job. Abending

QO95562 SED: PRIMARY COMMAND "I EVENT" TRUNCATES EVENT NAME

QO95563 THE "SCL LOAD DATE" IS ALWAYS MISSING ON SED PANEL.

QO95669 GJTRABTR/@JOBTRAC RETURN RC=20 FOR "END" STATEMENT.

QO95670 IMOD: "MAXCC CHECK" AND MSG TRAC849I AREN'T CORRECT

QO96060 ADI FEATURE: EXPRESSION ",\=_OSD-1_" NOT PROCESSED.

QO96074 ADR: "ACT=PURG" IS SUBMITTING NOT PURGING AN EVENT.

QO96101 RESTARTED JOB MAY INCORRECTLY WAIT FOR SUBMIT TIME.

QO96103 DIFFERENT JT CAN MARK SAME JOB IN JT11 AS COMPLETE.

QO96474 MISSING PANEL: PRED/SUCC MISSING AFTER DEL & RE-ADD

QO96506 GJTRABTR: GET/QUERY LIST "STAT CC" FOR COMPLETED OK

QO96549 ABTR: GET/QUERY PRINT "CMPC ??" FOR INTERNAL TASKS.

QO96558 ABTR: GET/QUERY PRINT "CMPC ??" FOR SCHEDULE LOADS.

QO96559 MULTIPLE SELECTS ON BUSGRP PANEL RESULT IN S978-04.

QO97130 SCL LOAD GETS RC=12 IF SAME RESOURCE DEFINED TWICE.

QO99065 SCL @EMAIL= WRONG WHEN DATE FORMAT IS INTERNATIONAL

QO99101 JOB START TIME IS INCORRECT IF THRESH USED ON CONT

QO99104 Subtask GJTRENFM ended suddently.

QO99150 ARCHIVE LISTS WRONG EVENT TYPE FOR SCL/IMOD/ARCHIVE

QO99151 THE DUMMY SCHEDULE IS NOT HANDLED AS A DUMMY EVENT.

QO99230 ABEND S0C4 POSSIBLE IN WTO INTERCEPT EXIT GJTRVMXT.

QO99231 CAN'T REMOVE O-DEP FLAG IF NO EXIT TRACX26 IS USED.

QO99232 MESSAGE TRAC006I DOESN'T INCLUDE ANY "RETURN CODE".

QO99241 GJTRABTR: POST DOESN'T REMOVE SUCCESSOR, BUT P-DEP.

QO99242 AUTO-SCHED IN JT11 MAY PREVENT AUTO-SCHED IN JT35.

QO99340 AUTO-SCHED JOBS MAY BE REJECTED WITH MSG TRAC024C.

QO99347 COND ON JOBCARD -> "CC CHECK" AND S0C7 IN GJTRVWTR.

QO99464 CORRECT REPORT HEADINGS

QO99617 Prevent Jobtrac from S001 abend in GJTRVWTR.

QO99658 SUPPORT FOR HARDCODED SCLLIB IF NOT USING DYNAMLOC.

QO99728 MSG $HASP003/RC=(84) POSSIBLE FOR AUTOSCHD RELEASE.

QO99736 CANNOT REMOVE O-DEP ON EVENT EXECUTION DETAIL PANEL

QO99816 CORRECT ARCHIVE AND PURGE REPORT HEADINGS

QO99833 TRAC049C changed to TRAC049I for clarity.

QO99851 AUTO-SCHD JOB NOT RELEASED, IF COND=(0,GT) IS USED.

QO99856 P DEP NOT ADDED IF SUCCESSOR EVENT ALREADY EXISTS

QO99879 GET 'TRAC200C - S0C4 ABEND' WHEN RUNNING VINIT3

QO99886 AUTOSCHD: NO "VERSION INCREASE" FOR ACTION CODE 'R'

QO99915 A78 ABEND IN GJTRSTAT

QO99924 ABEND S0C4 IN GJTRSQLT DURING REVERSE CONVERSION.

QO99925 JTS/AMR TABLE INCOMPLETE AFTER REVERSE CONVERSION.

QO99940 PURGE OR DELETE COMMAND DOES NOT RESET JOB STATUS.




QO99981 JTS/CCPF TABLE(S) MISSING AFTER REVERSE CONVERSION.

QO99982 JTS/SCS COMMANDS MAY BE MISSING AFTER REVERSE CONV.

QO99983 JTS/ADR TRIGGERS MAY BE MISSING AFTER REVERSE CONV.

QO99993 GJTRJPRG deletes STATs even if NODELETE specified.

QO99995 HOLIDAY 'H' DOESN'T SHOW FOR INTERNATIONAL DATE

QO99996 REMOVING O-DEP FROM IMOD ELEMENT RE-ADDS THIS IMOD.

QO99999 Events not Archived if Successors missing.

RO00033 JCLTRAC WITH "TYPRUN(JOBSCAN)" IS MISSING SOME JOBS

RO00034 EVENT NOT RELEASING

RO00035 L LINE CMD SHOULDN'T LIST ARCHIVED PREDS AND SUCCS.

RO00036 PREVENT JOBTRAC FROM S32E ABEND DURING STARTUP.

RO00037 MODIFY ADJ COMMAND DOES NOT ADJUST EVENT TIMES

RO00105 End-time not being recognized by the interval job.

RO00125 GJTRJPRG deletes AUDITs even if NODELETE specified.

RO00134 GJTRABTR: NO END DATE/TIME STAMP CREATED FOR DELETE

RO00135 LOOP IN GJTRENF3 IF JOBNAME IS 1 CHARACTER LONG

RO00142 CONVERTB: IPL RECORDS MISSING AFTER REV. CONVERSION

RO00143 ABEND S0C7 IN GJTRCTIM DURING CONVERSION

RO00153 @ Line Command No Longer Works

RO00174 P DEP ADDED INCORRECTLY AFTER EVENT UPDATE IN ISPF

RO00182 Genlevel changed to SP02..

RO00809 WRONG LOCATION IN MSG "NOT SCHED ... IS A HOLIDAY".

RO00811 DEFAULT0=YES: MSG TRAC020I MAY LIST WRONG LOCATION.

RO00815 EASYTRIEVE REPORTS: FILTER SELECTIONS MAY NOT WORK.

RO00819 SHOW/UPD YEAR FOR SELECT DATES ON ISPF EVENT PANELS

RO00821 CORRECT S133 ABEND DURING CONVERSION ON Z/OS 1.10

RO00843 P-DEP FLAG NOT ALWAYS REMOVED FOR "COMPLETED" PRED.

RO00844 TSO/ISPF: K=A DOESN'T DISPLAY JOBS WITH "CC CHECK".

RO00967 ADR: DISPLAY FULLY QUALIFIED DSNAME IN MSG TRAC003I

RO01067 CORRECT CONVERSION DATA ERRORS

RO01068 DO NOT KNIT RESTAGED SCHD RECORDS

RO01069 Honor HARD CODED PRED COUNT for CONVERTB

RO01203 ERROR MESSAGE "GJTRJPRA/005E" DURING HISTORY PURGE.

RO01316 ABENDS S80A/S878 POSSIBLE, IF MSG DB00101I WRITTEN.

RO01320 TRAC609W JMF SKIP LIST OPEN FAILED FOR GJMF20/GJMF30

RO01403 ISPF: TOP-LINE COMMAND "IPLS" WILL RESULT IN A LOOP

RO01421 WTO Over Max PREDs SUCCs EDTs and CPMs

RO01450 EMAIL TEXT MISSING IF NO USER TEXT IN TEMPLATE MBR.

RO01497 ISPF: RESTART CMD MAY CAUSE ABEND S0C4 IN GJTRCA11.

RO01500 AUTO-SCHED JOB: TYPRUN=HOLD ON JOBCARD NOT HONORED.

RO01502 JOBTRAC STAYS UP AFTER MSG "GJTRSTAT...TERMINATING"

RO01528 TRAC024C CANCELS AUTO-SCHD JOBS WITH SAME JOBNAME

RO01554 ARCHIVE REPORT: SCL EVENT MAY BE FLAGGED AS "JOB".

RO01592 "CATALOG ERROR CONDITIONS" NOT PROCESSED CORRECTLY.

RO01593 ARCHIVE ISSUES MSG "GJTRJARA/001E" FOR IPL RECORDS.

RO01597 CORRECT S/013-20 WHEN GJTRFCST SYSPRINT TO DASD

RO01641 JES JOB NUMBER NOT SET IN EXECUTION LIST ELEMENT

RO01686 AUTO EVENTS DOUBLED WITH 2 JT

RO01688 PURGE UTIL SYNTAX ERROR DELETES ALL STAT/AUDIT RECS

RO01690 STATINTV OPTION

RO01723 Miscelaneous conversion issues

RO01724 Convert "MISSING" Preds and Successors

RO01726 JCL CONTROL STATEMENT (SYNTAX) ERROR NOT RECOGNIZED

RO01737 "LATE" EMAIL PRINTS INCORRECT SYSID AND SUBMIT D/T.

RO01738 ARCHIVE UTILITY GJTRJARC INCLUDES FILE IPLPRINT/DD.

RO01743 JCLERR "RACF FAILED THE SUBMISSION" NOT RECOGNIZED.




RO01744 WTO message TRAC207E is not displayed in VINITx

RO01761 IPL RECORDS ARE NOT PROCESSED BY THE PURGE UTILITY.

RO01821 S0C1 POSSIBLE IN MOD GJTRCSCN IF DATABASE IS CLOSED

RO01883 CALCULATE LOWEST POSSIBLE VERSION NBR ON EVENT ADD

RO01886 FORECAST JOB: LOOP OR DUPLICATE EVENTS CAN HAPPEN.

RO01917 HISTORY DETAIL PANEL: WRONG VERSION FOR P/S LISTED.

RO01945 ARCHIVE WITH EVENT AWAITING RERUN DROPS SUCCESSORS

RO02125 Easytrieve Forecast Report missing Doclib/Man Act

RO02174 COMPILE ERRORS IN REPORTS WHEN USING EASYTRIEVE R11

RO02208 S0C7 ABEND IN FORECAST REPORT IF NO MATCHING EVENTS

RO02211 SCL LOAD FAILS IF MULTIPLE CC= DEF'S FOR SAME STEP.

RO02212 FORECAST MAY LIST WRONG LOCATION IF "@SETLOC=" USED

RO02218 ENLARGE KEY "SCCK" FOR CCD ELEMENT ON STAGING AREA.

RO02303 Interval job runs once or not across mid-night.

RO02309 AUTOSCHD JOB NOT POSTED IF ACTION CODE "T" IS USED.

RO02332 PURGE/CANCEL OPTION OF GENERIC RESOURCE NOT WORKING

RO02333 CUUS088E IF SUPPLYING JT'S TOKEN VIA SUBSYS(TOKEN).

RO02343 THE SYSTEM-ID MAY NOT BE CORRECT IF USING SYSAFF=.

RO02366 Add Extended Trace

RO02424 Increase performance for sequential access


RO03202 DELETE AND RE-ADD OF P/S MAY LIST STATUS "DELETED".

RO03427 EVENT SCHEDULED WITH P DEPENDENCY DOES NOT WAIT.

RO03445 ADD PANEL: START D/T WRONG WHEN DEFINING AS "ASAP".

RO03446 AN AUTO-SCHED JOB CAN REMAIN IN "WAIT EXEC" STATUS.

RO03616 P-DEP OF SUCCESSOR MAY NOT BE REMOVED BY PRED JOB.

RO03625 S0C4 POSSIBLE AT SUBMIT TIME WHEN USING RESOURCES.

RO03661 IMOD EXECUTION MAY RESULT IN S0C1/4 IN MOD GJTRSUB.

RO04349 Pred/Succ knit with wrong version if hardcoded on

RO04385 AUTO-SCHED: A JCL ERROR TURNS A Q-DEP INTO A J-DEP.

RO04440 ADD/ADDV: INTERNAL TRACE TABLE IS MISSING THE KEY.

RO04442 CAPTURE FILE INDEX: "PERCENT IN USE" VALUE GT 100%.

RO04515 S0C1 POSSIBLE IF TWO DSN TRIGGERS IN SAME MICROSEC.

RO04517 "ASAP" START D/T LISTED BY EASYTRIEVE/ARCHIVE/PURGE

RO04527 EDEP IMOD'S NOT RE-EXECUTED AFTER JOBTRAC RE-CYCLE.

RO04627 Remove Stage Delays from ADD/RUN

RO04680 Locations not reset for Calendar search in SCL

RO04717 @TODAY=08366 shows syntax error in SCL.

RO04966 THIS CHANGE CORRECTS THE FOLLOWING PROBLEMS:

RO05032 CANNOT REMOVE O-DEP FLAG IF TRACAUTH TABLE IS USED.

RO05084 CCPF PROCESSING IGNORED IF COND= CODED ON JOBCARD.

RO05124 DSN TRIGGERS MISSING IF MULT. TRIGGERS FOR SAME DSN

RO05142 SYSOUT NOT CAPTURED IF MULTIPLE OUTPUT GROUPS EXIST

RO05164 S0C1 ABEND POSSIBLE AFTER PROCESSING OF SCS COMMAND

RO05235 WRONG SCHEDULE, IF COND OPER FIELD ON COMMENT CARD.

RO05239 ONE SYSOUT TOO MANY IS CAPTURED; HOLD OPTION NOT OK

RO05241 TSO: S0C1 ABEND POSSIBLE IF THE "HIS AREA" IS FULL.

RO05282 SYSOUT CAPTURE: DON'T WRITE INDEX BLOCK IF NO DATA.

RO05283 SCL LOAD OK, EVEN THOUGH ERROR MSG TRAC176I ISSUED.

RO05321 Correct XPLAT jobs 'WAITING EXEC' at midnight

RO05346 CANNOT ADD 'O-DEP', IF STATUS IS WAIT-EXEC OR EXEC.

RO05347 JCLTRAC: MSG JCL1072E MAY SHOW UP FOR ADI VARIABLE.

RO05394 JOB WORKSHEET RPT GJTREZJW NO OUTPUT IF PARM ERROR

RO05508 Z/OS 1.7: ABEND S0C4 POSSIBLE FOR CMD JOBQ=JOBNAME.

RO05529 ABTR UTILITY: VERSION=50333, "STPC" FIELD INCORRECT

RO05581 ABTR UTILITY: QUERY W/ "L(N)" MAY LIST WRONG ENTRY.




RO05595 NOT-CAPTURED SYSOUT MAY NOT ALWAYS BE HELD, IF REQ.

RO05711 ABTR UTILITY: MODIFY OF AN IMOD -> WARNING CUUS042W

RO05729 ABTR UTILITY/MOD: CUUS040E W/ RC=4: RETRIES SKIPPED

RO05758 GLOBAL OPTION "HOLD ABENDING JOB" NOT WORKING.

RO05764 JOB SUMMARY RPT GJTREZJS GETS B101 COMPILER ERROR

RO05776 UNABLE TO SPECIFY RELATIVE DATES IN JOBTRAC REPORTS

RO05816 TRAC088W/TRAC089I AND X-DEP PROBLEMS.

RO05841 START-UP: JOBS MAY BE SUBMITTED DESPITE "PARM=HOLD"

RO06191 GJTRJARC: PARMS LIST/LAW AND EXCP NOT WORKING CORR.

RO06204 JOB STATUS IS NOT RESET TO PRODUCTION IN CA-11

RO06209 DUPLICATE JES-ID WILL RESULT IN STATUS "WAIT EXEC".

RO06234 Can't Delete MISSING events

RO06240 REMOVAL OF FINAL D-DEP VIA IMOD DOESN'T SUBMIT JOB.

RO06262 P-DEP NOT CLEARED, AFTER LAST PREDECESSOR REMOVED.

RO06268 SUPPORT FOR REQUEUE CMD $EJ,CANCEL (USED BY CA-MIM)

RO06290 MULT. "CC=" ENTRIES FOR SAME STEP NOT ALW. WORKING.

RO06317 0SYSARCH MAY DISPLAY "ARCHIVE IN PROGRESS" FOREVER.

RO06330 REMOTE: NJE JOBS DON'T HONOR CONDITION CODE CHECKS.

RO06335 NJE SURROGATE ENTRY BUILT, IF USING LOCAL JES NODE.

RO06353 AUTOS Q Restage as J / R Autos WaiT EXEC /R CMD QJ

RO06360 P-DEP ASSIGNED EVEN THOUGH COND PRED DOESN'T EXIST.

RO06399 S0C4 IN GJTRVSCH IF USING UDEFS TOGETHER WITH FLOWS

RO06401 OPTION $HJWAIT FOR AUTOSCHD JOBS DELAYS SUBMISSION.

RO06403 L LINE CMD DOESN'T DISPLAY MESSAGE "LOOP DETECTED".

RO06411 EVENT PURGED/RESTAGED IF OUTPUT PURGED FOR MULTI-CPU

RO06413 ENF r12 DCM Compatibility - Support Added Index

RO06414 SUPPORT FOR "DSC" FUNCTION OF THRUPUT MANAGER (TM).

RO06427 "COND. OPERATOR" NOT IGNORED ON CONTINUATION LINES.

RO06429 JT11 START-UP: RECOVERY OF IMOD MAY NOT BE WORKING.

RO06442 "L" LINE CMD MAY LIST "LOOP DETECTED", IF NO LOOP.

RO06457 SCHEDULE DOES NOT LOAD DUE TO LOOP IN GJTRDCOM

RO06469 MODIFY/PRG= PURGES THE EVENT BUT ALSO ADDS AN O-DEP

RO06488 ERRONEOUS TRAC179I MESSAGE ISSUED WITH RC=00

RO06511 CAN'T REMOVE A-DEP (OR M-DEP) FROM COMPLETED EVENT.

RO06583 INTERVAL JOB IS BEING RESTAGED WITH 'P' DEPENDENCY.

RO06638 FORECAST RC=8 IF DATA EXISTS AND CLEAR IS NOT USED

RO06645 FORECAST WILL NOT LOAD SAME SCHED FOR DIFFERENT DAY

RO06702 EVENT UPDATED EVEN IF USER DOES NOT HAVE SECURITY

RO06708 ADR ENTRY W/ "ACTION=PURG" MAY NOT PURGE THE EVENT.

RO06711 GJTRENFM SUBTASK ENDS PROCESSING QUEUED JOBPURGE EVT

RO06718 IMOD to support Web Services

RO06824 CANNOT REMOVE "?" DEPENDENCY FROM COMPLETED EVENT.

RO06845 GJTRABTR: ADD DOESN'T HONOR HARD-CODED P/S VERSION.

RO06890 JOBTRAC GOT MESSAGE TRAC179I DB ERROR: RET CD=11,

RO07056 TYPRUN=SCAN LEAVES JOB IN WAIT EXEC STATUS

RO07060 MISSING command is slow to respond

RO07151 INCREASE RANGE OF PRGDEFER STARTUP PARAMETER

RO07180 Restore Step Footers Feature

RO07214 Both Holiday and Cyclic Calendars must be defined

RO07230 Versions Not Connecting P/S Correctly / TRACX13 Parms

RO07286 S0C4 in GJTRVSCH when using CPM or Forecast.

RO07312 Historical Start Times incorrect in r11 Conversion.

RO07317 MULTIPLE JTS CALLS MAY HANG THE ISPF/ONLINE SESSION

RO07318 TRACMAC and STAGE1 changes for SP04..

RO08327 Abend S0C4/S0C1 in GJTRTRTB





RO08907 J-DEP POSSIBLE EVEN THOUGH EDEP/IMOD ENDS WITH RC=0

RO08913 JOBTRAC TERMINATES AFTER S214-0C FOR TASK 0SYSARCH.

RO08973 R-DEP NOT CLEARED IF DIFFERENT OSD'S FOR RESOURCES.

RO09045 EVENT STATUS MAY NOT BE ACCURATE ON REPORTS

RO09059 Autoschd jobs do not run when Jobtrac on Hold

RO09060 Module Names GJTRMAIV/GJTRMAHI were changed in r11

RO09124 SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A.

RO09129 K=E COMMAND MAY SHOW COMPLETED/ABENDED JOBS

RO09183 S0C4 ABEND, IF RUNNING GJTRJPRG WITHOUT FILE SYSIN.

RO09218 S0C7 ABEND IF SPECIFYING LOC="1 " ON THE ADD PANEL

RO09231 FAILING AUTO-SCHED JOB WILL RELEASE SUCCESSOR EVENT

RO09268 Schedules do not restage when o removed

RO09272 P/S VERSION NOT DEFAULTING TO "1", IF "DATE=*" USED

RO09278 MONITOR SYSTEM WASN'T SET UP TO SEND "LATE" EMAILS.

RO09315 RESTART CMD DOESN'T RE-ESTABLISH P/S RELATIONSHIPS.

RO09318 JOBNAME AND VERSION MISSING FOR TRAC822I + TRAC824I

RO09329 F LINE IN FORECAST MODE / @ LINE FOR ABENDED EVENT.

RO09948 Inefficient sequential processing caused delay

RO09969 JT/R11 DISPLAYS AND PROCESSES DUPLICATE AMR ENTRIES

RO10067 S0C7 IN GJTRBHSM POSSIBLE DURING REVERSE CONVERSION

RO10140 R35: AMR ENTRY NOT LISTED AFTER REVERSE CONVERSION.

RO10141 REVERSE CONVERSION: CONF. PANEL BUT NO CHANGE MADE.

RO10225 REVERSE CONVERSION: P/S MISSING AND STRANGE BUSGRP.

RO10226 REVERSE CONVERSION ADDS NEEDLESS EDEP/ARG RECORDS.

RO10345 STATUS "NOT SCHD" FOR ARCHIVED P/S AFTER CONVERSION

RO10362 Cyclic Calendar not reset for Hardcoded LOCS.

RO10446 Pred & Succ Vers not like 3.5/Threshold Changes Ver

RO10452 "MIM/REQUEUE" FEATURE NOT WORKING AFTER PTF RO06209

RO10467 CONDITION CODE CHECKS NOT BYPASSED IN CASE OF CC=0.

RO10468 MIM/REQUEUE: REQUEUED JOB MAY BE FLAGGED WITH S222.

RO10592 Delay the DELETE request of GJTRABTR.

RO10616 Holiday and Cyclic Calender issues In SCL

RO10630 Timing Problem Causes Jobs to Hang or CODE=PURGE

RO10690 JOB ALREADY EXISTS W/VER,SCL LOAD FAILED & HOL LOOP

RO10693 REMOTE/XPS EVENTS CAN REMAIN IN STATUS "WAIT EXEC".

RO10710 SUPPORT FOR THE "F" LINE COMMAND IN FORECAST MODE.

RO10909 TRACAUTH: "T" LINE CMD MAY GET MSG "UNAUTHORIZED".

RO11006 MAXCC Fail message, but job completes normally

RO11034 FORECAST P/S VERSIONS NOT LIKE SCHED LOAD

RO11098 S878-10 POSSIBLE, IF ARCHIVING THOUSANDS OF EVENTS.

RO11165 Reclaim/Reuse JCIBs to avoid S878 abend.

RO11195 REMOVAL OF AN "O-DEP" MAY NOT RESTAGE A FAILED SCL.

RO11334 MSG TRAC844I: EDEP/IMOD LOSES ARGUMENT DURING RETRY

RO11341 TRACAUTH: ACCESS NOT ALLOWED EVEN THOUGH IT'S OKAY.

RO11432 A CANCELED EDEP/IMOD REMAINS IN STATUS "EXECUTING".

RO11459 MESSAGE TRACDBRC (CEXL/PUTA) IS ISSUED FOR NJE JOBS

RO11551 EVENT CHANGE DOESN'T CANCEL EXISTING EDEP EXECUTION

RO11621 PRED'S CAN BE CHANGED EVEN THOUGH TRACAUTH SAYS NO.

RO11725 "$" TAKEN AS JES COMMAND CHARACTER ON JES3 SYSTEMS.

RO11737 SB37 POSSIBLE FOR SYSPRINT FILE IF RUNNING ARCHIVE.

RO11757 JCLTRAC: JOBSCAN ERRONEOUSLY LISTS MESSAGE IEFC612I

RO11758 S0C7 Abend in GJTRCIMD with NJE JOBs

RO11873 AUTOSCHD JOB NOT RELEASED, IF "/*PURGE" IN THE JCL.

RO12210 JOB ERRONEOUSLY FLAGGED/NOT FLAGGED WITH JCL ERROR.

RO12212 CA Jobtrac is not returning status to Autosys

RO12254 Z LINE CMD NOT RECAPTURING SYSOUT OF COMPLETED JOBS




RO12261 TRAC020I MISSES THE LOCATION, IF NJE JOB FROM JT35.

RO12308 FORECAST RC=0 EVEN IF SCL CONTAINS A SYNTAX ERROR

RO12356 ABORT FUNCTION NOT WORKING FOR 1ST HR AFT MIDNIGHT.

RO12358 NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE

RO12442 MSG TRAC014E/RC=15 FOR LOCAL NJE JOBS, IF INTERVAL.

RO12512 NO ASAP STARTTIME AFTER RESTAGE IN CASE OF AN ABEND

RO12670 INCORRECT START DATE/TIME AFTER R LINE COMMAND

RO12716 "@" LINE CMD WITH 'DEP' OPTION DOESN'T IGNORE PREDS

RO12771 JTS: AMR/ADR FEATURE ADDING EVENT WITH VERSION OF 0

RO12778 P-DEP NOT ASSIGNED, IF "@" W/ DEP USED MULT. TIMES.

RO12819 SCL LOAD: CONNECT TO COMPLETE PRED MAY SET 'P-DEP'.

RO13311 Autos JCL, Bad SYSAFF or NJE Node, S0C1, CODE=PURG

RO13344 S0C4 DURING JOBTRAC STARTUP WITH DIAG IGVINITGETMAIN

RO13687 TRACFC11E PFT COPY FAILED ISSUED DURING FORECAST RUN

RO14263 ISPF displays START TIME incorrectly.

RO14264 Options To Allow Pre-convert of r3.5 JOBHIST/ S0C7

RO14269 S0C7 in ISPF followed by BACKOUT loop

RO14270 MSG "CMD TASK BUSY" AFTER MODIFY "F JT,LONGERTHAN8"

RO14303 Prevent Jobtrac from high I/O problem, because

RO14312 R-DEP REMOVED BY JOBTRAC WHEN UPDATING PRIORITY

RO14409 ERROR UPDATING JTS SCS TABLE WITH SAME COMMAND

RO14433 MAKE SAMPLE JCL AVAILABLE FROM SMP/E TARGET DATASET

RO14444 NO 'P-DEP' FOR SUCC, IF ADDING A PRED WITH 'O-DEP'.

RO14508 S0C7 ABEND, IF DEFINING EVENT AS ITS OWN PRED/SUCC.

RO14550 SCL: TEST MODE (+TODAY=*) DISPLAYS "ALREADY EXISTS"

RO14571 NJE FROM V35 TO JT/R11 RESULTS IN MESSAGE TRAC822I.

RO14579 FORECAST REPORT HAS DUPLICATE PRED/SUCC RECORDS

RO14598 ABEND S0C4 POSSIBLE DURING SHUTDOWN OF JOBTRAC.

RO14613 AJO @ Event Reference Process Period Doesn't Work

RO14745 GJTRABTR/QUERY MAY LOOP IF EVENT WITH COLLISION KEY

RO14890 GJTRJPRG: GOING BACK BEFORE Y2K DELETES ALL HISTORY

RO14943 GJTRABTR/QUERY RETURNS STATUS ?? FOR COMPLETED IMOD

RO14960 GJTRJPRG/STTDAYS: ONLY PURGES FROM 1ST SYSID FOUND.

RO15166 TRACING IS DONE FOR EVERY CALL OF IMOD $UNIJT_INIT.

RO15183 HOURLY WRITTEN STATISTIC RECORDS, STATINTV IGNORED.

RO15322 MESSAAGE - TRACDBRC CEXL RC=08(14/048) PUTA

RO15400 WARNING JCL1070W BUT JCLTABL= HAS DIFFERENT MAXIMUM

RO15405 SCL: WRONG START/TARGET DATE, IF "P" USED ON 12/31.

RO15406 DB2 PLAN BIND FAILS WITH MSGS DSNX200I AND DSNT201I

RO15414 Allow CONVERTB to force 5 or 7 digit JobIDs.

RO15450 REVERSE CONVERSION: S0C7 IN GJTRBLIB IF MUF IS DOWN

RO15469 JOBS NJE'D TO LOCAL NODE STAYS IN WAIT-EXEC

RO15499 MSG TRAC098W MAY BE ISSUED FOR EVERY SYSOUT CAPTURE

RO15508 THE NUMBER of RUNNING JOBS EXCEEDS THE GENERIC VALUE

RO15535 ENFSTATS COMMAND ACTIVATES ENFTRACE STATISTICS

RO15633 Expanded Forecast Support- Numeric Tokens & Locking

RO15641 EXPAND THE LIMITS FOR 'L' LINE COMMAND.

RO15674 ABEND S0C4 POSSIBLE DURING EXECUTION OF STATUS CMD.

RO15693 BUSGRP display select does not work after T4N1238


RO16680 TRACWARN MSG STOPS ITERATIONS OF INTERVAL SCHEDULE.

RO16699 ERROR IF INVOKING JT'S CLIST TWICE ON SPLIT SCREENS

RO16718 EASYTRIEVE JOB GJTREZJW SHOWS ASAP FOR START VALUE

RO16721 JES3: HOLD ABENDING OUTPUT REJECTED W/ MSG IEE305I.

RO16724 LOOP IF GET (OR QUERY) W/ "V(N)" FOR ABENDED EVENT.

RO16740 CORRECT LINE COUNT FOR SYSOUT CAPTURE BROWSE




RO16753 EMAIL FUNCTION FAILS ON LONG EMAIL SERVER REPLY

RO16810 TRAC169I IS NOT HIGHLIGHTED

RO16860 S0C4 ABEND IN SMF EXIT GJTRU832 AT EARLY IPL STAGE.

RO16922 MONITOR TASKS DON'T SUSP/INTV NODE CLR/INTV M DEP

RO17032 R TYPE AUTO-SCHD ADD DOES NOT RUN WHEN JT ON HOLD

RO17066 ERROR IN ABORT TIME PROCESSING, IF EVENT HAS X-DEP.

RO17131 NULL ("//") STATEMENT APPENDED AT END OF EVERY JOB.

RO17156 FORECAST REPORT DOES NOT PAGE BREAK DOCLIB

RO17235 Abending Jobs with O-Deps do not restage.

RO17287 WRONG FORMAT OF LONG INTERNATIONAL DATES ON REPORTS

RO17299 NJE JOBS DO NOT SHOW EXEC SYSTEM ID

RO17340 ABEND U0203 IF UPDATE OF STATISTIC RECORD WILL FAIL

RO17574 JES JOBNUMBER OF COMPLETED EVENT WILL BE OVERLAID.

RO17639 SCHEDULE LOAD: ADD TEXT "ERROR=>" TO ERROR MESSAGE.

RO17844 Data Truncated on Output Browse

RO18311 GJTRJPRG MULTIPLE ISSUES ADDRESSED

RO18319 NOT RE-PROCESS THE LAST ENF EVENTS DURING RECOVERY

RO18323 INTERVAL JOB WITH EVENT TYPE DUMMY LOSES NODE NAME.

RO18557 SCL WITH COND OPER=R: P/S ENTRY MAY GET WRONG OSD.

RO18586 MESSAGE TRAC823I MAY BE ISSUED FOR NJE REMOTE JOB.

RO19162 WRONG YEAR IS DISPLAYED IN FORECAST BATCH REPORT

RO19292 Support for CA MSM r3.0 Software Deployment Service

RO19419 CROSS-PLATFORM: CUSN018W IF PROCESSP INCLUDES "!".

RO19515 NO TRACWARN MSG ISSUED IF JCL ERROR AFTER CC CHECK.

RO19760 Dynamic calculation of Eligible Devices.

RO21441 ARCHIVE TASK 0SYSARCH DOESN'T TERMINATE.

RO21669 THE STATUS OF A RUNNING JOB IS MARKED 'COMPLETE'

RO21692 BATCH FORECAST JOB GOT S0C4 ABEND AT GJTRHKV+72E

RO21711 Jobs routed to different Time Zones may be lost.

RO21837 EMAIL FEATURE/O-DEP REMOVAL: TRAC051E ISSUED TWICE.

RO21854 NEW OPTION WEEKENDHOL= TO MARK WEEKENDS AS HOLIDAY.

RO22533 FORECAST RUN: NO INDICATION, IF ALLEVENTS WAS USED.

RO22582 TRACX26 OPTION FOR RESTART

RO22603 STATUS DISPLAY: LARGE RECORD COUNTS ARE TRUNCATED.

RO22620 MH-DEP ASSIGNED IF "HOLIDAY ACTION TIME" IS IN USE.

RO22661 ISPF: ABEND S0C4 IF LEAVING AFTER STATUS AND FSWAP.

RO22728 MESSAGE 'TRACFAIL' POSSIBLE DURING AMR PROCESSING.

RO22809 SED: ARCHIVED P/S ENTRY AS (NOT SCHD) AFTER UPDATE.

RO22811 Z/OS 1.10: MOD GJTRCPER IS ON OPDATA TRACKING LIST.

RO22922 Presubmission JCL Errors not reported to XPLAT

RO22964 MSG TRAC310I ISSUED REPEATEDLY, R-DEP NEVER POSTED.

RO23063 ARCHIVE WITH T= PARAMETER NOT POSSIBLE FOR PRIOR YEARS

RO23157 TOP-LINE CMDS AMR/WTOS DON'T PRINT ALL AMR ENTRIES.

RO23197 TRACAUTH: MESSAGE UNAUTHORIZED FOR "ADD EVENT,L=N".

RO23255 AUTOSCHD: CONDITION CODE CHECKING DONE PER DEFAULT.

RO23270 SED PANEL: "D=*" DOESN'T LIST RESTAGED AUTOSCHD JOB

RO23511 NJE EVENT: "EXL" ELEMENT IS CREATED AT REMOTE NODE.

RO23557 AUTOSCHD: DEFAULT CONDITION CODE CHECKING NOT OKAY.

RO23622 CONVERSION: LOOP POSSIBLE IF "PRE-CONVERSION" DONE.

RO23868 GETS "WAIT EXEC" IF CANCELED WHILE WAITING FOR DSN.

RO23932 GJTRABTR: S878 ABEND POSSIBLE IF CALLED MANY TIMES.

RO24015 ROUTED TO DIFF TIME ZONE: CAN REMAIN IN EXEC STATUS

RO24108 NJE: JCL ERROR FLAGGED AS USER ABEND U0737 OR U0761

RO24110 ISPF: K=H LISTS ALL EVENTS W/"WAITING DEPENDENCIES"

RO24238 GJTRABTR: COMMAND MAY BE DONE FOR THE WRONG JOBTRAC

RO24833 IMOD REMAINS IN EXECUTING STATUS AFTER JT/RE-CYCLE.




RO24852 CONVERTED JOB IS MARKED AS COMPLETE DESPITE FAILURE

RO25240 Genlevel changed to AM01..

RO27371 GJTRJARC: CLEAN DONE FOR ARCHIVED (HISTORY) EVENTS.

RO27418 XPLATRERUN=LOCAL + TRAC014E/RC=01/07: EVENT HANGING

RO27470 CHANGE TO INCREASE SCAN INTERVAL W/ MODIFY COMMAND.

RO27779 RESTAGECC=NO:O-DEP CAN'T BE REMOVED FROM FAILED SCL

RO27898 IMOD RECONNECT/MESSAGE TRAC849I: VERSION INCORRECT.

RO27900 GJTRJARC: EVENT TYPE "JOB" CAN BE LISTED FOR IMODS.

RO27938 GJTRABTR: INCORRECT YEAR, IF CROSSING YEAR BOUNDARY

RO27953 ONLY P-DEP CANNOT BE REMOVED IN BATCH OR WITH IMOD.

RO28022 Staging Table rows are orphaned if exceptions used.

RO28172 GJTREZJW: P/S SECTION MISSING FOR ARCHIVED PRD/SUC.

RO28287 XPLAT HAS DUPLICATE JOBINITU FOR SCHEDULE LOAD

RO28379 HANG-UP OF JOBTRAC POSSIBLE DURING SHUTDOWN PROCESS

RO28536 S13C/U203 ABEND WHEN DIAG TRAPS(IGVINITGETMAIN) SET

RO28569 TRAC899I: GARBAGE AS TOKENS AFTER SWITCHING PRIMARY

RO29042 P-DEP FLAG NOT REMOVED, IF DELETE ON MISSING PANEL.

RO29378 JOBTRAC/EMAIL: BUSGRP FIELD MAY BE PADDED WITH N/Y.

RO29996 GJTRABTR: DUMP ISN'T LISTING SUPPLEMENTAL ELEMENTS.

RO30375 Ignore SMFID Processing for NJE jobs.

RO31053 JCL ERROR: "SYSTEM ID" OF PRIMARY JOBTRAC DISPLAYED

RO31136 GJTRABTR: ABEND S0C7, WHEN USING OPTION "CC(MC,N)".

RO31290 GJTRABTR: USE DEFAULT TOKEN, IF NO "DD DUMMY" STMT.

RO31401 JTS: AMR ENTRY FOR "TRACWARN" MESSAGE NOT PROCESSED

RO31457 GJTRJARC: ONLY THE LAST SPECIFIED LOCATION IS USED.

RO31460 SCL LOAD: S0C7, IF VALUE FOR @TODAY= ISN'T NUMERIC.

RO31601 NO "O-DEP" IS ASSIGNED, IF THE "ARCHIVE" TASK FAILS

RO32156 GJTRABTR: OPTION CC(JC) SKIPS COMPLETION CODE JCLCN

RO32352 Jobtrac got S0C4 at GJTRDCOM+654 during shutdown

RO32448 TABLE INFORMATIONS IN STATUS COMMAND ARE MISSING

RO32475 The failed job with O-dep can not be restaged.

RO32583 JOBTRAC TERMINATED AFTER MESSAGE TRCE016E.

RO32675 JOBTRAC GOT S0C4 ABEND WHEN REFRESHEXCL ISSUED.

RO32858 GENLEVEL CHANGED TO AM02.

RO34683 S0C1/4 POSSIBLE IN GJTRVWTR AFTER $HASP708 W/RC=06.

RO34690 THE COMPLETED R-AUTOSCHD JOB IS ADDED BACK

RO34755 JOB REMAINS IN STATUS "ABENDED/EX" AFTER $HASP310.

RO35076 NJE EXECUTION DETAIL PANEL: INCORRECT ORIG. VERSION

RO35077 TRAC822I/RC=2012: NJE JOB REMAINS IN STATUS "NAWT".

RO35203 NJE JOBS NEVER SHOW A STATUS OF EXECUTING ("NEXE").

RO35288 IVP JOB "JOBT@#$J": NO DATA ABOUT IEFACTRT SNAPPED.

RO35515 MONITOR/JT MAY FLAG INTERVAL JOB AS "ABENDED/PURGE"

RO36615 EASYTRIEVE: DELETED EVENTS AREN'T LISTED ON REPORTS

RO36930 AUTOSCHD WITH ACTION CODE T REJECTED WITH TRAC024C.

RO37069 MSG "TRACDBRC CEXL RC=08(14/048) GET9 K=TEVENT VVV"

RO37185 AUTO-SCHED JOB: JES HOLD COMMAND $HJNN MAY FAIL.

RO37285 JOB NOT TRACKED AND MSG CONVERTER POST ERROR ISSUED

RO37681 GENERIC RESOURCE: MORE JOBS EXECUTING THAN ALLOWED.

RO37696 SCL LOAD: LOOP POSSIBLE FOR PROCESSP="@!EVENTNAME".

RO37851 MSG TRAC320E IF LOADING MANY CPM FLOWS AT SAME TIME

RO37938 JOBTRAC MAY ABEND AFTER ARCH REPLY TO WTOR TRAC096A

RO38569 HISTORICAL-RUN-TIME in CPM flow job shows zero.

RO38613 GJTRABTR: YEAR VALUE OF START TIME IS NOT ADJUSTED.

RO38749 STATUS: GARBAGE FOR % DATA USED IF CAPTURE FILE NEW

RO40633 ABEND U0305 POSSIBLE FOR THE PURGE UTILITY GJTRJPRG

RO40674 Incorrect year is at the version date of predecessor




RO42344 NON-JOBTRAC JOB GETS MESSAGE "CONVERTER POST ERROR"

RO42347 GJTRABTR: RC MESSAGE: VERSION NO. MAY BE INCORRECT.

RO42381 SED PANEL: END DATE/TIME IS INCORRECT FOR NJE JOBS.

RO43235 Incorrect year is at the default version date

RO43607 MSG TRAC187I AND DUPLICATE EVENT ISN'T LOADED TWICE

RO43633 NO ERROR MESSAGE GIVEN, IF FAILURE DURING RESTAGING


RO45052 SCHEDULE REPORT-GJTREZJS READS EXCESSIVE I/O.

RO45053 REMOVING AM LEVEL REFERENCE

RO45140 OPT_AREA OF FORECAST/DB (FILE OPT0162) CAN RUN FULL

RO49018 SUPPORT INSTREAM DATA IN INSTREAM PROCEDURE.

RO49022 PROF COMMAND: ERROR ISPP353 FOR HELP PANEL GJHPRF2.

RO49024 GJTRSUB: A WRONG KEY WAS USED FOR AN UPDATE REQUEST

RO49025 LINES AT BOTTOM OF PASSWORD COMMAND CAN BE OVERLAID

RO49103 SA03 DURING SHUTDOWN, IF 0ARCHIVE RUNS AT SAME TIME

RO49177 MESSAGE TRACDBRC (WITH CEXL/GET9) FOR INTERVAL JOBS

RO49670 REDUCING THE I/O OF CXX.

RO49689 EXCESSIVE I/O'S DONE FOR THE EZT REPORT "GJTREZJW".

RO49724 NO WARNING MSG ISSUED, IF CAPTURE FILE BECOMES FULL

RO50497 NJE: LOOP IN COMPLETION PROCESSING AT REMOTE NODE.

RO52536 XPLAT: MSG CASH_E_0148 WITH TEXT SUBMISSION FAILED.

RO52538 PENDING DB REQUEST, MSGS DB00309I/DB01329I FOR MUF.

RO52539 TRACWARN MSG FOR CAPTURE FILE WITH DATA PART > 100%


RO52899 NJE JOB CAN REMAIN IN STATUS "NAWT" AT LOCAL NODE.

RO53649 EVENT SOURCE NOT DISPLAYED ON HISTORY DETAIL

RO54356 T18D831-ABEND S0C4-11 IN MODULE GJTRDCOM AT X'65C'

RO54472 RETURN CODE 3955 IN MESSAGE TRAC822I ISN'T CORRECT

RO55045 FORECAST JOB GETS ABEND S0C7 WITH EASYTRIEVE 11.6.

RO55046 OVERRIDE "@CYCNNN=MMDD,..." DOESN'T WORK CORRECTLY

RO55093 AN "M-DEP" ERRONEOUSLY ASSIGNED TO A FUTURE EVENT.

RO55397 CONVERTED JOB REMAINS IN STATUS "WAIT EXEC" IN R11

RO55750 S0C6 ABEND IN GSVXSPF WHEN ISSUING THE Q COMMAND

The CA RS 1309 service count for this release is 593

CA Jobtrac Job Management 12

CA RS 1309 Service List for CHDB000CA Jobtrac Job Management 12

CA RS 1309 Service List for CHDB000

FMID Service Description Hiper

CHDB000 QO86119 CCPF TABLE ENTRIES BUILT INCORRECTLY

QO86694 JOBS AWAIT START CAUSE SPILL

QO87951 EVENT HIST SYS ABEND INCORRECT

QO88082 PARM WLMRSRC=YES CAUSES S0C4

QO88150 DEPENDENCY CODE "D" NOT DISPLAYED ON THE SED PANEL.

QO88188 EVENT DELETE FROM ISPF JT UI WITH CA-11 CAUSES S0C4

QO88266 ENVIRONMENTAL DEPENDENCIES DO NOT DISPLAY ON SED

QO88464 EXCLUDE ARCHIVED EVENTS FROM BUSGRP DISPLAY

QO88475 CORRECT S/D22 ABEND IN PROGRAMS ISSUING COMMANDS

QO88685 DUPLICATE EVENTS ON FUTURE SCHEDULE LOAD

QO88686 EDEP: ISPF ERROR ISPP353 FOR HELP PANEL "GJHENV6".

QO88873 AUTO-SCHD JOBS NOT PROCESSED

QO88890 X DEPENDENCY NOT REMOVED UNDER CERTAIN CIRCUMSTANCE

QO88992 MESSAGE 'TRAC020I' MAY BE ISSUED TWICE FOR A JOB.

QO89066 GJTRABTR: S0C3 IF EDEP WITH INVALID RETRY INTERVAL.

QO89470 MESSAGE ISPP121 FOR HELP PANEL 'GJHAUD1' ON MODEL2.

QO89471 Correct Prompt On Max Lines value in Global Options

QO89599 SYSOUT CAPTURE OPTIONS MAX LINES ENTRY 2 INCORRECT

QO89730 EVENTS NOT TRIGGERED DURING TABLE ACTIVATION

QO89757 KEY 8 CSA

QO89761 S0C2 IN GCSLOP RUNNING GJTRCONV OR GJTRMAJC

QO89777 S0C4 ABEND IN GJTRTSVD WHEN USING "F" LINE COMMAND.

QO89801 SYSOUT CAPTURE: LINE COUNT INCORRECT AFTER TRAC196A

QO89804 EVENTS ARCHIVED REGARDLESS OF T= PARAMETER VALUES

QO89805 SYSOUT CAPTURE FILE FULL AND CAN NOT ARCHIVE W/ARCH

QO89823 ISPF: S0C4 POSSIBLE WHEN DISPLAYING "PURGED" EVENT.

QO89824 GJTRMAJC MAY NOT ALWAYS DELETE OR LIST ALL MEMBERS.

QO89825 JOBTRAC START-UP PARAMETER "OPTS=NN" DOESN'T WORK.

QO89826 COMPLETION PROCESSING LOOPS IF SUCC EVENT = EVENT

QO89882 SUPPORT FOR NEW TOP-LINE COMMANDS VIEW AND VIEWDB.

QO89993 EXECUTION OF CMDSET CAUSES ABEND S0C4 IN GJTRAUTO.

QO90008 EXECUTION OF MVS COMMANDS FROM "CMDSETS" MAY FAIL.

QO90009 "D T" DEFINED FOR 0000, BUT ISSUED AT 0430

QO90010 SYSOUT CAPTURE: PREVENT LOOP FOR WTOR 'TRAC196A'.

QO90097 SCS (SYSTEM COMMAND SCHED.) COMMAND MAY BE SKIPPED.

QO90099 CYC/HOL CALENDAR ENTRIES DELETED IF NO DFLT EXISTS

QO90101 ABEND CODE MISSING FROM TRACWARN MESSAGE

QO90293 EDEP FEATURE: EDEP'S IMODS NEVER START TO EXECUTE.

QO90340 PRIMARY SELECTION COMMAND "D=" NOT WORKING PROPERLY

QO90341 EDEP NOT ADDED IF FINAL "/" NOT SPECIFIED ON ED=

QO90367 ENVIRONMENTAL DEPENDENCY ARG NOT PASSED TO IMOD

QO90382 ABENDS S978 AND S0C4 RELATED TO THE BUSGRP COMMAND.

QO90388 MESSAGE "EVENT CHANGE IGNORED" IF EVENT GOES LATE

QO90524 ABEND S0C9 IN GJTRAUTO MAY HAPPEN AFTER START-UP.

QO90615 EVENT STATUS REMAINS WAIT EXEC WHEN JOB IS PURGED

QO90653 INCORRECT FMID WILL BE LISTED ON GJTRJARC'S REPORTS

QO90654 ABEND S0C4 IN GJTRVWTR MAY HAPPEN DURING START-UP.

QO90742 PRIMARY SELECTION COMMAND "K=" NOT WORKING PROPERLY

QO90743 EVENT ADDED WITH GJTRABTR GETS "J" DEPENDENCY

QO90869 ORPHANED / DELETED DATA RESTORED DURING CONVERSION

QO90870 REPORTING INTERVAL IS INCORRECT IN REPORT GJTREZST

QO90871 GSO EVENT CALENDAR USES INCORRECT HOL/CYC CALENDAR

QO90888 SCL LOAD: GLOBAL CONTROLS @WORKD/@WDNNN DON'T WORK.

QO90918 Correct abend 0CA in GJTRDCOM

QO90928 STATUS: ALL ZEROS ARE SUPPRESSED FOR SOME % FIELDS.

QO90966 INTERVAL JOB MAY END EARLY IF ASAP TIME SPECIFIED




QO90968 MESSAGE GJTRJARP/012E-0036; IS NOT VALID SUPPL TYPE

QO91152 ARCHIVE TASK REMOVES ARGUMENTS FROM INTERVAL EVENTS

QO91153 RETRY FEATURE NOT WORKING FOR IMOD'S USED AS EDEP'S

QO91169 ABEND 80A-10 IN GSS ADDRESS SPACE

QO91172 TRACWARN MESSAGE DISPLAYED FOR NJE JOBS IMMEDIATELY

QO91255 ARCHIVE REPORT: ALWAYS SCHEDULED TIME SHOWN AS TIME

QO91414 ABEND S0C4 POSSIBLE AT SUBMISSION OF PANVALET JOBS.

QO91415 ABEND SD22-08 POSSIBLE WHEN EXECUTING SCS COMMANDS.

QO91417 FAILING STEP NUMBER INCORRECT ON TRACWARN MESSAGE.

QO91501 GET AND QUERY DON'T RETURN THE NEXT EVENT FOR V(N).

QO91533 TYPE 'E' INCORRECTLY USED AS DEFAULT FOR INTERVALS.

QO91582 GJTRABTR: GET/QUERY NOT CORRECT FOR GENERIC REQ'S.

QO91583 REVERSE CONVERSION: PRED COUNT MAY NOT BE CORRECT.

QO91597 THRESHOLDS T/S/A NOT CORRECT, EARLY ABORT POSSIBLE.

QO91598 ABORT PROCESSING POSSIBLE FOR TIME THRESHOLDS T/S.

QO91752 Support IPV6; Fix Interval Job Handling in email

QO91799 TRAC051E HAS INCORRECT ABEND

QO91800 *DYNAMIC*: NBR OF INCOMPLETE PREDECESSORS NOT SHOWN

QO91901 CHANGE FOR VARIABLE EMAIL SERVER PORT NUMBER.

QO91989 EMAIL SENT BY JOBTRAC DOESN'T DISPLAY BUSINESS GRP.

QO92219 SCL CONTINUATION DATES/PRED/SUCC/OSD/VER INCORRECT

QO92279 JOBS RUN IMMEDIATELY IF HOLIDAY ACTION IS N, P, OR W

QO92288 EVENTS W/HARDCODED VERSIONS MAY CAUSE VRSN CONFLICTS

QO92317 SCHEDULE LOAD LOOPS IF PROCESSING PERIOD IS @EVTNAME

QO92344 Change JOBTRA00 STATINVL to STATINTV

QO92430 Genlevel changed to SP01..

QO93493 S106-0C POSSIBLE IF DATACOM IS DOWN WHILE JT IS UP.

QO93494 SUBMIT POSSIBLE IF M-DEP SET WHILE AWAITING/SUBMIT.

QO93495 S0C7 ABEND MAY OCCUR FOR LINE COMMAND ON HIST PANEL

QO93496 Increase SPACE allocation for REXX samples

QO93639 CORRECT TRACMAC CONTINUATION CAUSING ASSEMBLY ERROR

QO93829 ABEND S878 MAY HAPPEN IF MANY CALENDARS ARE DEFINED

QO93831 S0C7 ABEND IN GJTRENF1 AFTER SUBMISSION OF NJE JOB.

QO93977 ADR/DSNS COMMAND DISPLAYS ACTION 'DCNT' AS 'PURG'.

QO93999 AMR SAVE FAILS IF MESSAGE ID IS DUPLICATED

QO94151 ISPF ERROR MESSAGE ISPP353 FOR HELP PANEL GJHSCC2.

QO94207 S0C7 ABEND CAN OCCUR AFTER RUN OR ADD CMD FOR ISPF.

QO94211 MODIFY CMD DEL (REL/PRG/ADD) NOT WORKING CORRECTLY.

QO94258 TRAC006I DOESN'T LIST EVENT NAME AFTER MODIFY/ADD=.

QO94369 MONITOR CMDS: EITHER NO DATA RETURNED OR ABEND S0C4

QO94373 YEAR NOT SHOWN IN VERSION ON EED, EHD AND NED PANEL

QO94398 MODIFY "F JT,DUMP" CAUSES ABEND S806 FOR GJTRDBIO.

QO94445 SED(ISPLAY) PANEL ALWAYS SHOWS "SUBMITTED 00:00".

QO94556 STEP LEVEL CC CHECK FOR "LE" NOT WORKING CORRECTLY.

QO94620 SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A.

QO94624 CAN'T RESET OPT "D" OF "CATALOG ERROR CHECK (2RUD)"

QO94653 NJE JOBS NOT TRACKED IF JT/R11 RUNS ON REMOTE NODE.

QO94774 MESSAGE TRAC014E MAY INCLUDE GARBAGE AS REASON CODE

QO94791 NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE

QO94801 SOME GARBAGE ON NJE EXECUTION DETAIL PANEL GJTREVNJ

QO94979 HIST: NO START TIME DISPLAYED FOR SCHEDULED SCL'S.

QO94981 NOTIFY/SEND MESSAGE INCLUDES DATA FROM PREVIOUS JOB

QO95046 ARCHIVE TASK CAN LEAVE ORPHANED "CCD" SUPPLEMENTS.

QO95063 "BUSGRP" TRUNCATED ON EASYTRIEVE'S REPORT GJTREZJS.

QO95098 SCS COMMANDS WON'T BE REPEATED IF INTERVAL IS GIVEN

QO95099 EMAIL LISTS ARCH/SCHD FOR JOBTRAC'S INTERNAL TASKS.




QO95152 GJTRJPRG DELETES NEWEST NOT OLDEST HISTORY ENTRIES.

QO95153 GJTRCYCL DOES NOT ADD/UPDATE CYCLIC CAL CORRECTLY

QO95200 S0C7 ABEND IN GJTRCTIM DURING JTS TABLE CONVERSION

QO95222 IEFU83 S0C7 IF ADR TRIGGER WITH PROC PER NOT DAILY

QO95269 INCORRECT PREDECESSOR VERSION ASSIGNED

QO95270 CHG SUCCESSORS DOES NOT CHG "P" DEP ON SUCC EVENT

QO95271 ISPF INTERFACE: LOCKOUT AFTER DELETE OF JTS TABLE.

QO95415 LOCKOUT POSS. IF TSO/DELETE PARALLEL TO COMPLETION.

QO95453 Conversion propagates previous HOL Cal entries

QO95454 Conversion propagates previous CYCLIC Cal entries

QO95503 AUTO-SCHED: MESSAGE TRAC024C IF JOB ALREADY EXISTS.

QO95504 STATUS "DELETED BY USERID" NOT SHOWN ON HIST PANEL.

QO95506 GJTRABTR: "POST" MAY BE REJECTED WITH RC=4 OR RC=8.

QO95520 AMR FEATURE: ABEND S0C4 POSSIBLE IN GJTRVMXT/GCSLIO

QO95549 S0C7 in Jobtrac 3.5 to r11 conversion job. Abending

QO95562 SED: PRIMARY COMMAND "I EVENT" TRUNCATES EVENT NAME

QO95563 THE "SCL LOAD DATE" IS ALWAYS MISSING ON SED PANEL.

QO95669 GJTRABTR/@JOBTRAC RETURN RC=20 FOR "END" STATEMENT.

QO95670 IMOD: "MAXCC CHECK" AND MSG TRAC849I AREN'T CORRECT

QO96060 ADI FEATURE: EXPRESSION ",\=_OSD-1_" NOT PROCESSED.

QO96074 ADR: "ACT=PURG" IS SUBMITTING NOT PURGING AN EVENT.

QO96101 RESTARTED JOB MAY INCORRECTLY WAIT FOR SUBMIT TIME.

QO96103 DIFFERENT JT CAN MARK SAME JOB IN JT11 AS COMPLETE.

QO96474 MISSING PANEL: PRED/SUCC MISSING AFTER DEL & RE-ADD

QO96506 GJTRABTR: GET/QUERY LIST "STAT CC" FOR COMPLETED OK

QO96549 ABTR: GET/QUERY PRINT "CMPC ??" FOR INTERNAL TASKS.

QO96558 ABTR: GET/QUERY PRINT "CMPC ??" FOR SCHEDULE LOADS.

QO96559 MULTIPLE SELECTS ON BUSGRP PANEL RESULT IN S978-04.

QO97130 SCL LOAD GETS RC=12 IF SAME RESOURCE DEFINED TWICE.

QO99065 SCL @EMAIL= WRONG WHEN DATE FORMAT IS INTERNATIONAL

QO99101 JOB START TIME IS INCORRECT IF THRESH USED ON CONT

QO99104 Subtask GJTRENFM ended suddently.

QO99150 ARCHIVE LISTS WRONG EVENT TYPE FOR SCL/IMOD/ARCHIVE

QO99151 THE DUMMY SCHEDULE IS NOT HANDLED AS A DUMMY EVENT.

QO99230 ABEND S0C4 POSSIBLE IN WTO INTERCEPT EXIT GJTRVMXT.

QO99231 CAN'T REMOVE O-DEP FLAG IF NO EXIT TRACX26 IS USED.

QO99232 MESSAGE TRAC006I DOESN'T INCLUDE ANY "RETURN CODE".

QO99241 GJTRABTR: POST DOESN'T REMOVE SUCCESSOR, BUT P-DEP.

QO99242 AUTO-SCHED IN JT11 MAY PREVENT AUTO-SCHED IN JT35.

QO99340 AUTO-SCHED JOBS MAY BE REJECTED WITH MSG TRAC024C.

QO99347 COND ON JOBCARD -> "CC CHECK" AND S0C7 IN GJTRVWTR.

QO99464 CORRECT REPORT HEADINGS

QO99617 Prevent Jobtrac from S001 abend in GJTRVWTR.

QO99658 SUPPORT FOR HARDCODED SCLLIB IF NOT USING DYNAMLOC.

QO99728 MSG $HASP003/RC=(84) POSSIBLE FOR AUTOSCHD RELEASE.

QO99736 CANNOT REMOVE O-DEP ON EVENT EXECUTION DETAIL PANEL

QO99816 CORRECT ARCHIVE AND PURGE REPORT HEADINGS

QO99833 TRAC049C changed to TRAC049I for clarity.

QO99851 AUTO-SCHD JOB NOT RELEASED, IF COND=(0,GT) IS USED.

QO99856 P DEP NOT ADDED IF SUCCESSOR EVENT ALREADY EXISTS

QO99879 GET 'TRAC200C - S0C4 ABEND' WHEN RUNNING VINIT3

QO99886 AUTOSCHD: NO "VERSION INCREASE" FOR ACTION CODE 'R'

QO99915 A78 ABEND IN GJTRSTAT

QO99924 ABEND S0C4 IN GJTRSQLT DURING REVERSE CONVERSION.

QO99925 JTS/AMR TABLE INCOMPLETE AFTER REVERSE CONVERSION.

QO99940 PURGE OR DELETE COMMAND DOES NOT RESET JOB STATUS.




QO99981 JTS/CCPF TABLE(S) MISSING AFTER REVERSE CONVERSION.

QO99982 JTS/SCS COMMANDS MAY BE MISSING AFTER REVERSE CONV.

QO99983 JTS/ADR TRIGGERS MAY BE MISSING AFTER REVERSE CONV.

QO99993 GJTRJPRG deletes STATs even if NODELETE specified.

QO99995 HOLIDAY 'H' DOESN'T SHOW FOR INTERNATIONAL DATE

QO99996 REMOVING O-DEP FROM IMOD ELEMENT RE-ADDS THIS IMOD.

QO99999 Events not Archived if Successors missing.


RO00034 EVENT NOT RELEASING

RO00035 L LINE CMD SHOULDN'T LIST ARCHIVED PREDS AND SUCCS.

RO00036 PREVENT JOBTRAC FROM S32E ABEND DURING STARTUP.

RO00037 MODIFY ADJ COMMAND DOES NOT ADJUST EVENT TIMES

RO00105 End-time not being recognized by the interval job.

RO00125 GJTRJPRG deletes AUDITs even if NODELETE specified.

RO00134 GJTRABTR: NO END DATE/TIME STAMP CREATED FOR DELETE

RO00135 LOOP IN GJTRENF3 IF JOBNAME IS 1 CHARACTER LONG

RO00142 CONVERTB: IPL RECORDS MISSING AFTER REV. CONVERSION

RO00143 ABEND S0C7 IN GJTRCTIM DURING CONVERSION

RO00153 @ Line Command No Longer Works

RO00174 P DEP ADDED INCORRECTLY AFTER EVENT UPDATE IN ISPF


RO00809 WRONG LOCATION IN MSG "NOT SCHED ... IS A HOLIDAY".

RO00811 DEFAULT0=YES: MSG TRAC020I MAY LIST WRONG LOCATION.

RO00815 EASYTRIEVE REPORTS: FILTER SELECTIONS MAY NOT WORK.

RO00819 SHOW/UPD YEAR FOR SELECT DATES ON ISPF EVENT PANELS

RO00821 CORRECT S133 ABEND DURING CONVERSION ON Z/OS 1.10

RO00843 P-DEP FLAG NOT ALWAYS REMOVED FOR "COMPLETED" PRED.

RO00844 TSO/ISPF: K=A DOESN'T DISPLAY JOBS WITH "CC CHECK".

RO00967 ADR: DISPLAY FULLY QUALIFIED DSNAME IN MSG TRAC003I

RO01067 CORRECT CONVERSION DATA ERRORS

RO01068 DO NOT KNIT RESTAGED SCHD RECORDS

RO01069 Honor HARD CODED PRED COUNT for CONVERTB

RO01203 ERROR MESSAGE "GJTRJPRA/005E" DURING HISTORY PURGE.

RO01316 ABENDS S80A/S878 POSSIBLE, IF MSG DB00101I WRITTEN.

RO01320 TRAC609W JMF SKIP LIST OPEN FAILED FOR GJMF20/GJMF30

RO01403 ISPF: TOP-LINE COMMAND "IPLS" WILL RESULT IN A LOOP

RO01421 WTO Over Max PREDs SUCCs EDTs and CPMs

RO01450 EMAIL TEXT MISSING IF NO USER TEXT IN TEMPLATE MBR.

RO01497 ISPF: RESTART CMD MAY CAUSE ABEND S0C4 IN GJTRCA11.

RO01500 AUTO-SCHED JOB: TYPRUN=HOLD ON JOBCARD NOT HONORED.

RO01502 JOBTRAC STAYS UP AFTER MSG "GJTRSTAT...TERMINATING"

RO01528 TRAC024C CANCELS AUTO-SCHD JOBS WITH SAME JOBNAME

RO01554 ARCHIVE REPORT: SCL EVENT MAY BE FLAGGED AS "JOB".

RO01592 "CATALOG ERROR CONDITIONS" NOT PROCESSED CORRECTLY.

RO01593 ARCHIVE ISSUES MSG "GJTRJARA/001E" FOR IPL RECORDS.

RO01597 CORRECT S/013-20 WHEN GJTRFCST SYSPRINT TO DASD

RO01641 JES JOB NUMBER NOT SET IN EXECUTION LIST ELEMENT

RO01686 AUTO EVENTS DOUBLED WITH 2 JT

RO01688 PURGE UTIL SYNTAX ERROR DELETES ALL STAT/AUDIT RECS

RO01690 STATINTV OPTION

RO01723 Miscelaneous conversion issues

RO01724 Convert "MISSING" Preds and Successors

RO01726 JCL CONTROL STATEMENT (SYNTAX) ERROR NOT RECOGNIZED

RO01737 "LATE" EMAIL PRINTS INCORRECT SYSID AND SUBMIT D/T.

RO01738 ARCHIVE UTILITY GJTRJARC INCLUDES FILE IPLPRINT/DD.

RO01743 JCLERR "RACF FAILED THE SUBMISSION" NOT RECOGNIZED.




RO01744 WTO message TRAC207E is not displayed in VINITx

RO01761 IPL RECORDS ARE NOT PROCESSED BY THE PURGE UTILITY.

RO01821 S0C1 POSSIBLE IN MOD GJTRCSCN IF DATABASE IS CLOSED

RO01883 CALCULATE LOWEST POSSIBLE VERSION NBR ON EVENT ADD

RO01886 FORECAST JOB: LOOP OR DUPLICATE EVENTS CAN HAPPEN.

RO01917 HISTORY DETAIL PANEL: WRONG VERSION FOR P/S LISTED.

RO01945 ARCHIVE WITH EVENT AWAITING RERUN DROPS SUCCESSORS

RO02125 Easytrieve Forecast Report missing Doclib/Man Act

RO02174 COMPILE ERRORS IN REPORTS WHEN USING EASYTRIEVE R11

RO02208 S0C7 ABEND IN FORECAST REPORT IF NO MATCHING EVENTS

RO02211 SCL LOAD FAILS IF MULTIPLE CC= DEF'S FOR SAME STEP.

RO02212 FORECAST MAY LIST WRONG LOCATION IF "@SETLOC=" USED

RO02218 ENLARGE KEY "SCCK" FOR CCD ELEMENT ON STAGING AREA.

RO02303 Interval job runs once or not across mid-night.

RO02309 AUTOSCHD JOB NOT POSTED IF ACTION CODE "T" IS USED.

RO02332 PURGE/CANCEL OPTION OF GENERIC RESOURCE NOT WORKING

RO02333 CUUS088E IF SUPPLYING JT'S TOKEN VIA SUBSYS(TOKEN).

RO02343 THE SYSTEM-ID MAY NOT BE CORRECT IF USING SYSAFF=.

RO02366 Add Extended Trace

RO02424 Increase performance for sequential access


RO03202 DELETE AND RE-ADD OF P/S MAY LIST STATUS "DELETED".

RO03427 EVENT SCHEDULED WITH P DEPENDENCY DOES NOT WAIT.

RO03445 ADD PANEL: START D/T WRONG WHEN DEFINING AS "ASAP".

RO03446 AN AUTO-SCHED JOB CAN REMAIN IN "WAIT EXEC" STATUS.

RO03616 P-DEP OF SUCCESSOR MAY NOT BE REMOVED BY PRED JOB.

RO03625 S0C4 POSSIBLE AT SUBMIT TIME WHEN USING RESOURCES.

RO03661 IMOD EXECUTION MAY RESULT IN S0C1/4 IN MOD GJTRSUB.

RO04349 Pred/Succ knit with wrong version if hardcoded on

RO04385 AUTO-SCHED: A JCL ERROR TURNS A Q-DEP INTO A J-DEP.

RO04440 ADD/ADDV: INTERNAL TRACE TABLE IS MISSING THE KEY.

RO04442 CAPTURE FILE INDEX: "PERCENT IN USE" VALUE GT 100%.

RO04515 S0C1 POSSIBLE IF TWO DSN TRIGGERS IN SAME MICROSEC.

RO04517 "ASAP" START D/T LISTED BY EASYTRIEVE/ARCHIVE/PURGE

RO04527 EDEP IMOD'S NOT RE-EXECUTED AFTER JOBTRAC RE-CYCLE.

RO04627 Remove Stage Delays from ADD/RUN

RO04680 Locations not reset for Calendar search in SCL

RO04717 @TODAY=08366 shows syntax error in SCL.

RO04966 THIS CHANGE CORRECTS THE FOLLOWING PROBLEMS:

RO05032 CANNOT REMOVE O-DEP FLAG IF TRACAUTH TABLE IS USED.

RO05084 CCPF PROCESSING IGNORED IF COND= CODED ON JOBCARD.

RO05124 DSN TRIGGERS MISSING IF MULT. TRIGGERS FOR SAME DSN

RO05142 SYSOUT NOT CAPTURED IF MULTIPLE OUTPUT GROUPS EXIST

RO05164 S0C1 ABEND POSSIBLE AFTER PROCESSING OF SCS COMMAND

RO05235 WRONG SCHEDULE, IF COND OPER FIELD ON COMMENT CARD.

RO05239 ONE SYSOUT TOO MANY IS CAPTURED; HOLD OPTION NOT OK

RO05241 TSO: S0C1 ABEND POSSIBLE IF THE "HIS AREA" IS FULL.

RO05282 SYSOUT CAPTURE: DON'T WRITE INDEX BLOCK IF NO DATA.

RO05283 SCL LOAD OK, EVEN THOUGH ERROR MSG TRAC176I ISSUED.

RO05321 Correct XPLAT jobs 'WAITING EXEC' at midnight

RO05346 CANNOT ADD 'O-DEP', IF STATUS IS WAIT-EXEC OR EXEC.

RO05347 JCLTRAC: MSG JCL1072E MAY SHOW UP FOR ADI VARIABLE.

RO05394 JOB WORKSHEET RPT GJTREZJW NO OUTPUT IF PARM ERROR

RO05508 Z/OS 1.7: ABEND S0C4 POSSIBLE FOR CMD JOBQ=JOBNAME.

RO05529 ABTR UTILITY: VERSION=50333, "STPC" FIELD INCORRECT

RO05581 ABTR UTILITY: QUERY W/ "L(N)" MAY LIST WRONG ENTRY.




RO05595 NOT-CAPTURED SYSOUT MAY NOT ALWAYS BE HELD, IF REQ.

RO05711 ABTR UTILITY: MODIFY OF AN IMOD -> WARNING CUUS042W

RO05729 ABTR UTILITY/MOD: CUUS040E W/ RC=4: RETRIES SKIPPED

RO05758 GLOBAL OPTION "HOLD ABENDING JOB" NOT WORKING.

RO05764 JOB SUMMARY RPT GJTREZJS GETS B101 COMPILER ERROR

RO05776 UNABLE TO SPECIFY RELATIVE DATES IN JOBTRAC REPORTS

RO05816 TRAC088W/TRAC089I AND X-DEP PROBLEMS.

RO05841 START-UP: JOBS MAY BE SUBMITTED DESPITE "PARM=HOLD"

RO06191 GJTRJARC: PARMS LIST/LAW AND EXCP NOT WORKING CORR.

RO06204 JOB STATUS IS NOT RESET TO PRODUCTION IN CA-11

RO06209 DUPLICATE JES-ID WILL RESULT IN STATUS "WAIT EXEC".

RO06234 Can't Delete MISSING events

RO06240 REMOVAL OF FINAL D-DEP VIA IMOD DOESN'T SUBMIT JOB.

RO06262 P-DEP NOT CLEARED, AFTER LAST PREDECESSOR REMOVED.

RO06268 SUPPORT FOR REQUEUE CMD $EJ,CANCEL (USED BY CA-MIM)

RO06290 MULT. "CC=" ENTRIES FOR SAME STEP NOT ALW. WORKING.

RO06317 0SYSARCH MAY DISPLAY "ARCHIVE IN PROGRESS" FOREVER.

RO06330 REMOTE: NJE JOBS DON'T HONOR CONDITION CODE CHECKS.

RO06335 NJE SURROGATE ENTRY BUILT, IF USING LOCAL JES NODE.

RO06353 AUTOS Q Restage as J / R Autos WaiT EXEC /R CMD QJ

RO06360 P-DEP ASSIGNED EVEN THOUGH COND PRED DOESN'T EXIST.

RO06399 S0C4 IN GJTRVSCH IF USING UDEFS TOGETHER WITH FLOWS

RO06401 OPTION $HJWAIT FOR AUTOSCHD JOBS DELAYS SUBMISSION.

RO06403 L LINE CMD DOESN'T DISPLAY MESSAGE "LOOP DETECTED".

RO06411 EVENT PURGED/RESTAGED IF OUTPUT PURGED FOR MULTI-CPU

RO06413 ENF r12 DCM Compatibility - Support Added Index

RO06414 SUPPORT FOR "DSC" FUNCTION OF THRUPUT MANAGER (TM).

RO06427 "COND. OPERATOR" NOT IGNORED ON CONTINUATION LINES.

RO06429 JT11 START-UP: RECOVERY OF IMOD MAY NOT BE WORKING.

RO06442 "L" LINE CMD MAY LIST "LOOP DETECTED", IF NO LOOP.

RO06457 SCHEDULE DOES NOT LOAD DUE TO LOOP IN GJTRDCOM

RO06469 MODIFY/PRG= PURGES THE EVENT BUT ALSO ADDS AN O-DEP

RO06488 ERRONEOUS TRAC179I MESSAGE ISSUED WITH RC=00

RO06511 CAN'T REMOVE A-DEP (OR M-DEP) FROM COMPLETED EVENT.

RO06583 INTERVAL JOB IS BEING RESTAGED WITH 'P' DEPENDENCY.

RO06638 FORECAST RC=8 IF DATA EXISTS AND CLEAR IS NOT USED

RO06645 FORECAST WILL NOT LOAD SAME SCHED FOR DIFFERENT DAY

RO06702 EVENT UPDATED EVEN IF USER DOES NOT HAVE SECURITY

RO06708 ADR ENTRY W/ "ACTION=PURG" MAY NOT PURGE THE EVENT.

RO06711 GJTRENFM SUBTASK ENDS PROCESSING QUEUED JOBPURGE EVT

RO06718 IMOD to support Web Services

RO06824 CANNOT REMOVE "?" DEPENDENCY FROM COMPLETED EVENT.

RO06845 GJTRABTR: ADD DOESN'T HONOR HARD-CODED P/S VERSION.

RO06890 JOBTRAC GOT MESSAGE TRAC179I DB ERROR: RET CD=11,

RO07056 TYPRUN=SCAN LEAVES JOB IN WAIT EXEC STATUS

RO07060 MISSING command is slow to respond

RO07151 INCREASE RANGE OF PRGDEFER STARTUP PARAMETER

RO07180 Restore Step Footers Feature

RO07214 Both Holiday and Cyclic Calendars must be defined

RO07230 Versions Not Connecting P/S Correctly / TRACX13 Parms

RO07286 S0C4 in GJTRVSCH when using CPM or Forecast.

RO07312 Historical Start Times incorrect in r11 Conversion.

RO07317 MULTIPLE JTS CALLS MAY HANG THE ISPF/ONLINE SESSION

RO07318 TRACMAC and STAGE1 changes for SP04..

RO08327 Abend S0C4/S0C1 in GJTRTRTB





RO08907 J-DEP POSSIBLE EVEN THOUGH EDEP/IMOD ENDS WITH RC=0

RO08913 JOBTRAC TERMINATES AFTER S214-0C FOR TASK 0SYSARCH.

RO08973 R-DEP NOT CLEARED IF DIFFERENT OSD'S FOR RESOURCES.

RO09045 EVENT STATUS MAY NOT BE ACCURATE ON REPORTS

RO09059 Autoschd jobs do not run when Jobtrac on Hold

RO09060 Module Names GJTRMAIV/GJTRMAHI were changed in r11

RO09124 SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A.

RO09129 K=E COMMAND MAY SHOW COMPLETED/ABENDED JOBS

RO09183 S0C4 ABEND, IF RUNNING GJTRJPRG WITHOUT FILE SYSIN.

RO09218 S0C7 ABEND IF SPECIFYING LOC="1 " ON THE ADD PANEL

RO09231 FAILING AUTO-SCHED JOB WILL RELEASE SUCCESSOR EVENT

RO09268 Schedules do not restage when o removed

RO09272 P/S VERSION NOT DEFAULTING TO "1", IF "DATE=*" USED

RO09278 MONITOR SYSTEM WASN'T SET UP TO SEND "LATE" EMAILS.

RO09315 RESTART CMD DOESN'T RE-ESTABLISH P/S RELATIONSHIPS.

RO09318 JOBNAME AND VERSION MISSING FOR TRAC822I + TRAC824I

RO09329 F LINE IN FORECAST MODE / @ LINE FOR ABENDED EVENT.

RO09948 Inefficient sequential processing caused delay

RO09969 JT/R11 DISPLAYS AND PROCESSES DUPLICATE AMR ENTRIES

RO10067 S0C7 IN GJTRBHSM POSSIBLE DURING REVERSE CONVERSION

RO10140 R35: AMR ENTRY NOT LISTED AFTER REVERSE CONVERSION.

RO10141 REVERSE CONVERSION: CONF. PANEL BUT NO CHANGE MADE.

RO10225 REVERSE CONVERSION: P/S MISSING AND STRANGE BUSGRP.

RO10226 REVERSE CONVERSION ADDS NEEDLESS EDEP/ARG RECORDS.

RO10345 STATUS "NOT SCHD" FOR ARCHIVED P/S AFTER CONVERSION

RO10362 Cyclic Calendar not reset for Hardcoded LOCS.

RO10446 Pred & Succ Vers not like 3.5/Threshold Changes Ver

RO10452 "MIM/REQUEUE" FEATURE NOT WORKING AFTER PTF RO06209

RO10467 CONDITION CODE CHECKS NOT BYPASSED IN CASE OF CC=0.

RO10468 MIM/REQUEUE: REQUEUED JOB MAY BE FLAGGED WITH S222.

RO10592 Delay the DELETE request of GJTRABTR.

RO10616 Holiday and Cyclic Calender issues In SCL

RO10630 Timing Problem Causes Jobs to Hang or CODE=PURGE

RO10690 JOB ALREADY EXISTS W/VER,SCL LOAD FAILED & HOL LOOP

RO10693 REMOTE/XPS EVENTS CAN REMAIN IN STATUS "WAIT EXEC".

RO10710 SUPPORT FOR THE "F" LINE COMMAND IN FORECAST MODE.

RO10909 TRACAUTH: "T" LINE CMD MAY GET MSG "UNAUTHORIZED".

RO11006 MAXCC Fail message, but job completes normally

RO11034 FORECAST P/S VERSIONS NOT LIKE SCHED LOAD

RO11098 S878-10 POSSIBLE, IF ARCHIVING THOUSANDS OF EVENTS.

RO11165 Reclaim/Reuse JCIBs to avoid S878 abend.

RO11195 REMOVAL OF AN "O-DEP" MAY NOT RESTAGE A FAILED SCL.

RO11334 MSG TRAC844I: EDEP/IMOD LOSES ARGUMENT DURING RETRY

RO11341 TRACAUTH: ACCESS NOT ALLOWED EVEN THOUGH IT'S OKAY.

RO11432 A CANCELED EDEP/IMOD REMAINS IN STATUS "EXECUTING".

RO11459 MESSAGE TRACDBRC (CEXL/PUTA) IS ISSUED FOR NJE JOBS

RO11551 EVENT CHANGE DOESN'T CANCEL EXISTING EDEP EXECUTION

RO11621 PRED'S CAN BE CHANGED EVEN THOUGH TRACAUTH SAYS NO.

RO11725 "$" TAKEN AS JES COMMAND CHARACTER ON JES3 SYSTEMS.

RO11737 SB37 POSSIBLE FOR SYSPRINT FILE IF RUNNING ARCHIVE.

RO11757 JCLTRAC: JOBSCAN ERRONEOUSLY LISTS MESSAGE IEFC612I

RO11758 S0C7 Abend in GJTRCIMD with NJE JOBs

RO11873 AUTOSCHD JOB NOT RELEASED, IF "/*PURGE" IN THE JCL.

RO12210 JOB ERRONEOUSLY FLAGGED/NOT FLAGGED WITH JCL ERROR.

RO12212 CA Jobtrac is not returning status to Autosys

RO12254 Z LINE CMD NOT RECAPTURING SYSOUT OF COMPLETED JOBS




RO12261 TRAC020I MISSES THE LOCATION, IF NJE JOB FROM JT35.

RO12308 FORECAST RC=0 EVEN IF SCL CONTAINS A SYNTAX ERROR

RO12356 ABORT FUNCTION NOT WORKING FOR 1ST HR AFT MIDNIGHT.

RO12358 NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE

RO12442 MSG TRAC014E/RC=15 FOR LOCAL NJE JOBS, IF INTERVAL.

RO12512 NO ASAP STARTTIME AFTER RESTAGE IN CASE OF AN ABEND

RO12670 INCORRECT START DATE/TIME AFTER R LINE COMMAND

RO12716 "@" LINE CMD WITH 'DEP' OPTION DOESN'T IGNORE PREDS

RO12771 JTS: AMR/ADR FEATURE ADDING EVENT WITH VERSION OF 0

RO12778 P-DEP NOT ASSIGNED, IF "@" W/ DEP USED MULT. TIMES.

RO12819 SCL LOAD: CONNECT TO COMPLETE PRED MAY SET 'P-DEP'.

RO13311 Autos JCL, Bad SYSAFF or NJE Node, S0C1, CODE=PURG

RO13344 S0C4 DURING JOBTRAC STARTUP WITH DIAG IGVINITGETMAIN

RO13687 TRACFC11E PFT COPY FAILED ISSUED DURING FORECAST RUN

RO14263 ISPF displays START TIME incorrectly.

RO14264 Options To Allow Pre-convert of r3.5 JOBHIST/ S0C7

RO14269 S0C7 in ISPF followed by BACKOUT loop

RO14270 MSG "CMD TASK BUSY" AFTER MODIFY "F JT,LONGERTHAN8"

RO14303 Prevent Jobtrac from high I/O problem, because

RO14312 R-DEP REMOVED BY JOBTRAC WHEN UPDATING PRIORITY

RO14409 ERROR UPDATING JTS SCS TABLE WITH SAME COMMAND

RO14433 MAKE SAMPLE JCL AVAILABLE FROM SMP/E TARGET DATASET

RO14444 NO 'P-DEP' FOR SUCC, IF ADDING A PRED WITH 'O-DEP'.

RO14508 S0C7 ABEND, IF DEFINING EVENT AS ITS OWN PRED/SUCC.

RO14550 SCL: TEST MODE (+TODAY=*) DISPLAYS "ALREADY EXISTS"

RO14571 NJE FROM V35 TO JT/R11 RESULTS IN MESSAGE TRAC822I.

RO14579 FORECAST REPORT HAS DUPLICATE PRED/SUCC RECORDS

RO14598 ABEND S0C4 POSSIBLE DURING SHUTDOWN OF JOBTRAC.

RO14613 AJO @ Event Reference Process Period Doesn't Work

RO14745 GJTRABTR/QUERY MAY LOOP IF EVENT WITH COLLISION KEY

RO14890 GJTRJPRG: GOING BACK BEFORE Y2K DELETES ALL HISTORY

RO14943 GJTRABTR/QUERY RETURNS STATUS ?? FOR COMPLETED IMOD

RO14960 GJTRJPRG/STTDAYS: ONLY PURGES FROM 1ST SYSID FOUND.

RO15166 TRACING IS DONE FOR EVERY CALL OF IMOD $UNIJT_INIT.

RO15183 HOURLY WRITTEN STATISTIC RECORDS, STATINTV IGNORED.

RO15322 MESSAAGE - TRACDBRC CEXL RC=08(14/048) PUTA

RO15400 WARNING JCL1070W BUT JCLTABL= HAS DIFFERENT MAXIMUM

RO15405 SCL: WRONG START/TARGET DATE, IF "P" USED ON 12/31.

RO15406 DB2 PLAN BIND FAILS WITH MSGS DSNX200I AND DSNT201I

RO15414 Allow CONVERTB to force 5 or 7 digit JobIDs.

RO15450 REVERSE CONVERSION: S0C7 IN GJTRBLIB IF MUF IS DOWN

RO15469 JOBS NJE'D TO LOCAL NODE STAYS IN WAIT-EXEC

RO15499 MSG TRAC098W MAY BE ISSUED FOR EVERY SYSOUT CAPTURE

RO15508 THE NUMBER of RUNNING JOBS EXCEEDS THE GENERIC VALUE

RO15535 ENFSTATS COMMAND ACTIVATES ENFTRACE STATISTICS

RO15633 Expanded Forecast Support- Numeric Tokens & Locking

RO15641 EXPAND THE LIMITS FOR 'L' LINE COMMAND.

RO15674 ABEND S0C4 POSSIBLE DURING EXECUTION OF STATUS CMD.

RO15693 BUSGRP display select does not work after T4N1238


RO16680 TRACWARN MSG STOPS ITERATIONS OF INTERVAL SCHEDULE.

RO16699 ERROR IF INVOKING JT'S CLIST TWICE ON SPLIT SCREENS

RO16718 EASYTRIEVE JOB GJTREZJW SHOWS ASAP FOR START VALUE

RO16721 JES3: HOLD ABENDING OUTPUT REJECTED W/ MSG IEE305I.

RO16724 LOOP IF GET (OR QUERY) W/ "V(N)" FOR ABENDED EVENT.

RO16740 CORRECT LINE COUNT FOR SYSOUT CAPTURE BROWSE




RO16753 EMAIL FUNCTION FAILS ON LONG EMAIL SERVER REPLY

RO16810 TRAC169I IS NOT HIGHLIGHTED

RO16860 S0C4 ABEND IN SMF EXIT GJTRU832 AT EARLY IPL STAGE.

RO16922 MONITOR TASKS DON'T SUSP/INTV NODE CLR/INTV M DEP

RO17032 R TYPE AUTO-SCHD ADD DOES NOT RUN WHEN JT ON HOLD

RO17066 ERROR IN ABORT TIME PROCESSING, IF EVENT HAS X-DEP.

RO17131 NULL ("//") STATEMENT APPENDED AT END OF EVERY JOB.

RO17156 FORECAST REPORT DOES NOT PAGE BREAK DOCLIB

RO17235 Abending Jobs with O-Deps do not restage.

RO17287 WRONG FORMAT OF LONG INTERNATIONAL DATES ON REPORTS

RO17299 NJE JOBS DO NOT SHOW EXEC SYSTEM ID

RO17340 ABEND U0203 IF UPDATE OF STATISTIC RECORD WILL FAIL

RO17574 JES JOBNUMBER OF COMPLETED EVENT WILL BE OVERLAID.

RO17639 SCHEDULE LOAD: ADD TEXT "ERROR=>" TO ERROR MESSAGE.

RO17844 Data Truncated on Output Browse

RO18311 GJTRJPRG MULTIPLE ISSUES ADDRESSED

RO18319 NOT RE-PROCESS THE LAST ENF EVENTS DURING RECOVERY

RO18323 INTERVAL JOB WITH EVENT TYPE DUMMY LOSES NODE NAME.

RO18557 SCL WITH COND OPER=R: P/S ENTRY MAY GET WRONG OSD.

RO18586 MESSAGE TRAC823I MAY BE ISSUED FOR NJE REMOTE JOB.

RO19162 WRONG YEAR IS DISPLAYED IN FORECAST BATCH REPORT

RO19292 Support for CA MSM r3.0 Software Deployment Service

RO19419 CROSS-PLATFORM: CUSN018W IF PROCESSP INCLUDES "!".

RO19515 NO TRACWARN MSG ISSUED IF JCL ERROR AFTER CC CHECK.

RO19760 Dynamic calculation of Eligible Devices.

RO21441 ARCHIVE TASK 0SYSARCH DOESN'T TERMINATE.

RO21669 THE STATUS OF A RUNNING JOB IS MARKED 'COMPLETE'

RO21692 BATCH FORECAST JOB GOT S0C4 ABEND AT GJTRHKV+72E

RO21711 Jobs routed to different Time Zones may be lost.

RO21837 EMAIL FEATURE/O-DEP REMOVAL: TRAC051E ISSUED TWICE.

RO21854 NEW OPTION WEEKENDHOL= TO MARK WEEKENDS AS HOLIDAY.

RO22533 FORECAST RUN: NO INDICATION, IF ALLEVENTS WAS USED.

RO22582 TRACX26 OPTION FOR RESTART

RO22603 STATUS DISPLAY: LARGE RECORD COUNTS ARE TRUNCATED.

RO22620 MH-DEP ASSIGNED IF "HOLIDAY ACTION TIME" IS IN USE.

RO22661 ISPF: ABEND S0C4 IF LEAVING AFTER STATUS AND FSWAP.

RO22728 MESSAGE 'TRACFAIL' POSSIBLE DURING AMR PROCESSING.

RO22809 SED: ARCHIVED P/S ENTRY AS (NOT SCHD) AFTER UPDATE.

RO22811 Z/OS 1.10: MOD GJTRCPER IS ON OPDATA TRACKING LIST.

RO22922 Presubmission JCL Errors not reported to XPLAT

RO22964 MSG TRAC310I ISSUED REPEATEDLY, R-DEP NEVER POSTED.

RO23063 ARCHIVE WITH T= PARAMETER NOT POSSIBLE FOR PRIOR YEARS

RO23157 TOP-LINE CMDS AMR/WTOS DON'T PRINT ALL AMR ENTRIES.

RO23197 TRACAUTH: MESSAGE UNAUTHORIZED FOR "ADD EVENT,L=N".

RO23255 AUTOSCHD: CONDITION CODE CHECKING DONE PER DEFAULT.

RO23270 SED PANEL: "D=*" DOESN'T LIST RESTAGED AUTOSCHD JOB

RO23511 NJE EVENT: "EXL" ELEMENT IS CREATED AT REMOTE NODE.

RO23557 AUTOSCHD: DEFAULT CONDITION CODE CHECKING NOT OKAY.

RO23622 CONVERSION: LOOP POSSIBLE IF "PRE-CONVERSION" DONE.

RO23868 GETS "WAIT EXEC" IF CANCELED WHILE WAITING FOR DSN.

RO23932 GJTRABTR: S878 ABEND POSSIBLE IF CALLED MANY TIMES.

RO24015 ROUTED TO DIFF TIME ZONE: CAN REMAIN IN EXEC STATUS

RO24108 NJE: JCL ERROR FLAGGED AS USER ABEND U0737 OR U0761

RO24110 ISPF: K=H LISTS ALL EVENTS W/"WAITING DEPENDENCIES"

RO24238 GJTRABTR: COMMAND MAY BE DONE FOR THE WRONG JOBTRAC

RO24833 IMOD REMAINS IN EXECUTING STATUS AFTER JT/RE-CYCLE.




RO24852 CONVERTED JOB IS MARKED AS COMPLETE DESPITE FAILURE

RO25240 Genlevel changed to AM01..

RO27371 GJTRJARC: CLEAN DONE FOR ARCHIVED (HISTORY) EVENTS.

RO27418 XPLATRERUN=LOCAL + TRAC014E/RC=01/07: EVENT HANGING

RO27470 CHANGE TO INCREASE SCAN INTERVAL W/ MODIFY COMMAND.

RO27779 RESTAGECC=NO:O-DEP CAN'T BE REMOVED FROM FAILED SCL

RO27898 IMOD RECONNECT/MESSAGE TRAC849I: VERSION INCORRECT.

RO27900 GJTRJARC: EVENT TYPE "JOB" CAN BE LISTED FOR IMODS.

RO27938 GJTRABTR: INCORRECT YEAR, IF CROSSING YEAR BOUNDARY

RO27953 ONLY P-DEP CANNOT BE REMOVED IN BATCH OR WITH IMOD.

RO28022 Staging Table rows are orphaned if exceptions used.

RO28172 GJTREZJW: P/S SECTION MISSING FOR ARCHIVED PRD/SUC.

RO28287 XPLAT HAS DUPLICATE JOBINITU FOR SCHEDULE LOAD

RO28379 HANG-UP OF JOBTRAC POSSIBLE DURING SHUTDOWN PROCESS

RO28536 S13C/U203 ABEND WHEN DIAG TRAPS(IGVINITGETMAIN) SET

RO28569 TRAC899I: GARBAGE AS TOKENS AFTER SWITCHING PRIMARY

RO29042 P-DEP FLAG NOT REMOVED, IF DELETE ON MISSING PANEL.

RO29378 JOBTRAC/EMAIL: BUSGRP FIELD MAY BE PADDED WITH N/Y.

RO29996 GJTRABTR: DUMP ISN'T LISTING SUPPLEMENTAL ELEMENTS.

RO30375 Ignore SMFID Processing for NJE jobs.

RO31053 JCL ERROR: "SYSTEM ID" OF PRIMARY JOBTRAC DISPLAYED

RO31136 GJTRABTR: ABEND S0C7, WHEN USING OPTION "CC(MC,N)".

RO31290 GJTRABTR: USE DEFAULT TOKEN, IF NO "DD DUMMY" STMT.

RO31401 JTS: AMR ENTRY FOR "TRACWARN" MESSAGE NOT PROCESSED

RO31457 GJTRJARC: ONLY THE LAST SPECIFIED LOCATION IS USED.

RO31460 SCL LOAD: S0C7, IF VALUE FOR @TODAY= ISN'T NUMERIC.

RO31601 NO "O-DEP" IS ASSIGNED, IF THE "ARCHIVE" TASK FAILS

RO32156 GJTRABTR: OPTION CC(JC) SKIPS COMPLETION CODE JCLCN

RO32352 Jobtrac got S0C4 at GJTRDCOM+654 during shutdown


RO32475 The failed job with O-dep can not be restaged.

RO32583 JOBTRAC TERMINATED AFTER MESSAGE TRCE016E.

RO32675 JOBTRAC GOT S0C4 ABEND WHEN REFRESHEXCL ISSUED.

RO32858 GENLEVEL CHANGED TO AM02.

RO34683 S0C1/4 POSSIBLE IN GJTRVWTR AFTER $HASP708 W/RC=06.

RO34690 THE COMPLETED R-AUTOSCHD JOB IS ADDED BACK

RO34755 JOB REMAINS IN STATUS "ABENDED/EX" AFTER $HASP310.

RO35076 NJE EXECUTION DETAIL PANEL: INCORRECT ORIG. VERSION

RO35077 TRAC822I/RC=2012: NJE JOB REMAINS IN STATUS "NAWT".

RO35203 NJE JOBS NEVER SHOW A STATUS OF EXECUTING ("NEXE").

RO35288 IVP JOB "JOBT@#$J": NO DATA ABOUT IEFACTRT SNAPPED.

RO35515 MONITOR/JT MAY FLAG INTERVAL JOB AS "ABENDED/PURGE"

RO36615 EASYTRIEVE: DELETED EVENTS AREN'T LISTED ON REPORTS

RO36930 AUTOSCHD WITH ACTION CODE T REJECTED WITH TRAC024C.

RO37069 MSG "TRACDBRC CEXL RC=08(14/048) GET9 K=TEVENT VVV"

RO37185 AUTO-SCHED JOB: JES HOLD COMMAND $HJNN MAY FAIL.

RO37285 JOB NOT TRACKED AND MSG CONVERTER POST ERROR ISSUED

RO37681 GENERIC RESOURCE: MORE JOBS EXECUTING THAN ALLOWED.

RO37696 SCL LOAD: LOOP POSSIBLE FOR PROCESSP="@!EVENTNAME".

RO37851 MSG TRAC320E IF LOADING MANY CPM FLOWS AT SAME TIME

RO37938 JOBTRAC MAY ABEND AFTER ARCH REPLY TO WTOR TRAC096A

RO38569 HISTORICAL-RUN-TIME in CPM flow job shows zero.

RO38613 GJTRABTR: YEAR VALUE OF START TIME IS NOT ADJUSTED.

RO38749 STATUS: GARBAGE FOR % DATA USED IF CAPTURE FILE NEW

RO40633 ABEND U0305 POSSIBLE FOR THE PURGE UTILITY GJTRJPRG

RO40674 Incorrect year is at the version date of predecessor




RO42344 NON-JOBTRAC JOB GETS MESSAGE "CONVERTER POST ERROR"

RO42347 GJTRABTR: RC MESSAGE: VERSION NO. MAY BE INCORRECT.

RO42381 SED PANEL: END DATE/TIME IS INCORRECT FOR NJE JOBS.

RO43235 Incorrect year is at the default version date

RO43607 MSG TRAC187I AND DUPLICATE EVENT ISN'T LOADED TWICE

RO43633 NO ERROR MESSAGE GIVEN, IF FAILURE DURING RESTAGING


RO45052 SCHEDULE REPORT-GJTREZJS READS EXCESSIVE I/O.

RO45053 REMOVING AM LEVEL REFERENCE

RO45140 OPT_AREA OF FORECAST/DB (FILE OPT0162) CAN RUN FULL

RO49018 SUPPORT INSTREAM DATA IN INSTREAM PROCEDURE.

RO49022 PROF COMMAND: ERROR ISPP353 FOR HELP PANEL GJHPRF2.

RO49024 GJTRSUB: A WRONG KEY WAS USED FOR AN UPDATE REQUEST

RO49025 LINES AT BOTTOM OF PASSWORD COMMAND CAN BE OVERLAID

RO49103 SA03 DURING SHUTDOWN, IF 0ARCHIVE RUNS AT SAME TIME

RO49177 MESSAGE TRACDBRC (WITH CEXL/GET9) FOR INTERVAL JOBS

RO49670 REDUCING THE I/O OF CXX.

RO49689 EXCESSIVE I/O'S DONE FOR THE EZT REPORT "GJTREZJW".

RO49724 NO WARNING MSG ISSUED, IF CAPTURE FILE BECOMES FULL

RO50497 NJE: LOOP IN COMPLETION PROCESSING AT REMOTE NODE.

RO52536 XPLAT: MSG CASH_E_0148 WITH TEXT SUBMISSION FAILED.

RO52538 PENDING DB REQUEST, MSGS DB00309I/DB01329I FOR MUF.

RO52539 TRACWARN MSG FOR CAPTURE FILE WITH DATA PART > 100%


RO52899 NJE JOB CAN REMAIN IN STATUS "NAWT" AT LOCAL NODE.

RO53649 EVENT SOURCE NOT DISPLAYED ON HISTORY DETAIL

RO54356 T18D831-ABEND S0C4-11 IN MODULE GJTRDCOM AT X'65C'

RO54472 RETURN CODE 3955 IN MESSAGE TRAC822I ISN'T CORRECT

RO55045 FORECAST JOB GETS ABEND S0C7 WITH EASYTRIEVE 11.6.

RO55046 OVERRIDE "@CYCNNN=MMDD,..." DOESN'T WORK CORRECTLY

RO55093 AN "M-DEP" ERRONEOUSLY ASSIGNED TO A FUTURE EVENT.

RO55397 CONVERTED JOB REMAINS IN STATUS "WAIT EXEC" IN R11

RO55750 S0C6 ABEND IN GSVXSPF WHEN ISSUING THE Q COMMAND

The CA RS 1309 service count for this FMID is593


CA RS 1309 - PTF QO86119 DetailsCA Jobtrac Job Management 11.0 23

CA RS 1309 - PTF QO86119 Details

Release Service Details11.0 QO86119 QO86119 M.C.S. ENTRIES = ++APAR (QO86119)

DESC (CCPF TABLE ENTRIES BUILT INCORRECTLY)

/* ---------------------------------------------------------------- */

/* PRODUCT: CA-Jobtrac */

/* RELEASE: 11.0 */

/* DATE: 21 FEB 2007 */

/* HYPER: YES */

/* */

/* STARTRAK PROBLEM PRODUCT NAME: JOBTRC PROBLEM NUMBER: 768 */

/* ---------------------------------------------------------------- */

/* CCPF TABLE ENTRIES BUILT INCORRECTLY */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.

++VER (Z038) FMID(CHDB000)

SUP (T5EA003).





DESC (JOBS AWAIT START CAUSE SPILL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAR 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* JOBS AWAIT START CAUSE SPILL */

/* ---------------------------------------------------------------- */

/* The Datacom log requires frequent spilling when */

/* many jobs are awaiting start time. The CA Jobtrac */

/* system appears to be idle other than waiting for */

/* jobs to become eligible for submission. */

/* ---------------------------------------------------------------- */.


SUP (T5EA004).





DESC (EVENT HIST SYS ABEND INCORRECT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 MAY 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT HIST SYS ABEND INCORRECT */

/* ---------------------------------------------------------------- */

/* The completion code is displayed incorrectly on the */

/* event history display when a system abend occurs. */

/* completion codes for maximum condition code and */

/* user abend display properly. */

/* ---------------------------------------------------------------- */.


SUP (T5EA007).





DESC (PARM WLMRSRC=YES CAUSES S0C4)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 MAY 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PARM WLMRSRC=YES CAUSES S0C4 */

/* ---------------------------------------------------------------- */

/* If WLMRSRC=YES is specified in the CA Jobtrac */

/* startup parameters and WLM is not available, a S0C4 */

/* abend may occur during CA Jobtrac initialization. */

/* ---------------------------------------------------------------- */.


SUP (T5EA005).





DESC (DEPENDENCY CODE "D" NOT DISPLAYED ON THE SED PANEL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 MAY 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* DEPENDENCY CODE "D" NOT DISPLAYED ON THE SED PANEL. */

/* ---------------------------------------------------------------- */

/* IF AN EVENT IS LOADED WITH A DATA SET DEPENDENCY, */

/* THEN THE SED PANEL WILL LIST THE CORRECT DSN COUNT, */

/* BUT IS DOESN'T DISPLAY A DEPENDENCY CODE OF "D". */

/* THE EVENT IS FLAGGED WITH "AWAITING SUBMISSION", */

/* EVEN THOUGH IT WON'T BE SUBMITTED RIGHT AWAY. */

/* ---------------------------------------------------------------- */.


SUP (T18D396).





DESC (EVENT DELETE FROM ISPF JT UI WITH CA-11 CAUSES S0C4)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 MAY 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* EVENT DELETE FROM ISPF JT UI WITH CA-11 CAUSES S0C4 */

/* ---------------------------------------------------------------- */

/* If the "D" (Delete the event) line command is used */

/* from the Jobtrac Scheduled Event Display for an */

/* event with a "P" dependency a S0C4 abend will occur */

/* if CA-11 is installed. */

/* ---------------------------------------------------------------- */.


SUP (T5EA012).





DESC (ENVIRONMENTAL DEPENDENCIES DO NOT DISPLAY ON SED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 MAY 2007 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* ENVIRONMENTAL DEPENDENCIES DO NOT DISPLAY ON SED */

/* ---------------------------------------------------------------- */

/* When the EDEP command is issued from the CA Jobtrac */

/* Scheduled Event Display (SED) panel, error message */

/* GJTRA009 is displayed even though environmental */

/* dependencies exist. */

/* ---------------------------------------------------------------- */.


PRE (QO88150)

SUP (T5EA014).





DESC (EXCLUDE ARCHIVED EVENTS FROM BUSGRP DISPLAY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 MAY 2007 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* EXCLUDE ARCHIVED EVENTS FROM BUSGRP DISPLAY */

/* ---------------------------------------------------------------- */

/* Archived events are included in the processing of */

/* the BUSGRP command and they should not be. */

/* ---------------------------------------------------------------- */.


SUP (T5EA010).





DESC (CORRECT S/D22 ABEND IN PROGRAMS ISSUING COMMANDS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 MAY 2007 */

/* HYPER: YES */

/* */

/* */

/* ---------------------------------------------------------------- */

/* CORRECT S/D22 ABEND IN PROGRAMS ISSUING COMMANDS */

/* ---------------------------------------------------------------- */

/* Several programs issuing JES commands are issuing */

/* an SVC 34 with a malformed parameter list resulting */

/* in S/D22 abends. */

/* ---------------------------------------------------------------- */.


PRE (QO86694)

SUP (T5EA009).





DESC (DUPLICATE EVENTS ON FUTURE SCHEDULE LOAD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAY 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* DUPLICATE EVENTS ON FUTURE SCHEDULE LOAD */

/* ---------------------------------------------------------------- */

/* If a schedule is awaiting start time, duplicate */

/* events will be created when the start time is */

/* reached and the schedule is loaded. */

/* ---------------------------------------------------------------- */.


PRE (QO88475)

SUP (T5EA013).





DESC (EDEP: ISPF ERROR ISPP353 FOR HELP PANEL "GJHENV6".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAY 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EDEP: ISPF ERROR ISPP353 FOR HELP PANEL "GJHENV6". */

/* ---------------------------------------------------------------- */

/* ENTERING TOP-LINE COMMAND "EDEP" ON THE "SED" PANEL */

/* AND INVOKING HELP FOR THE "RETRY INTERVAL FIELD" */

/* (PF1/OPTION "5") RESULTS IN ISPF MESSAGE "ISPP353". */

/* ---------------------------------------------------------------- */.


SUP (T5EA015).





DESC (AUTO-SCHD JOBS NOT PROCESSED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 JUN 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHD JOBS NOT PROCESSED */

/* ---------------------------------------------------------------- */

/* When an AUTO-SCHD job is submitted with //$AUTO, */

/* PARM='Q@' the job is held, but is not processed */

/* further. */

/* ---------------------------------------------------------------- */.


PRE (QO88475,QO88685)

SUP (T5EA011).





DESC (X DEPENDENCY NOT REMOVED UNDER CERTAIN CIRCUMSTANCE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 JUN 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* X DEPENDENCY NOT REMOVED UNDER CERTAIN CIRCUMSTANCE */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (T5EA019).





DESC (MESSAGE 'TRAC020I' MAY BE ISSUED TWICE FOR A JOB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 JUN 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE 'TRAC020I' MAY BE ISSUED TWICE FOR A JOB. */

/* ---------------------------------------------------------------- */

/* IF WILL OCCUR, IF MORE THAN ONE JOBTRAC IS RUNNING */

/* ON THE SAME LPAR, AND IF ONE OF THESE JOBTRAC'S IS */

/* FROM RELEASE 11.0. */

/* ---------------------------------------------------------------- */.


PRE (QO88873)

SUP (T18D415).





DESC (GJTRABTR: S0C3 IF EDEP WITH INVALID RETRY INTERVAL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 JUN 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: S0C3 IF EDEP WITH INVALID RETRY INTERVAL. */

/* ---------------------------------------------------------------- */

/* ADDING AN "EDEP" REQUIREMENT IN BATCH WITH AN IN- */

/* VALID RETRY INTERVAL WILL RESULT IN ABEND S0C3. */

/* LISTING AN EVENT WITH AN EDEP REQUIREMENT IN BATCH */

/* WILL ALWAYS DISPLAY "00:00" AS RETRY INTERVAL. */

/* ---------------------------------------------------------------- */.


SUP (T18D414).





DESC (MESSAGE ISPP121 FOR HELP PANEL 'GJHAUD1' ON MODEL2.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 JUN 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE ISPP121 FOR HELP PANEL 'GJHAUD1' ON MODEL2. */

/* ---------------------------------------------------------------- */

/* THE HELP PANEL GJHAUD1 INCLUDES MORE THAN 24 LINES, */

/* SO THAT IT DOESN'T FIT ANYMORE ON MODEL2 TERMINALS */

/* (WITH 24 LINES) THUS CAUSING ERROR MESSAGE ISPP121. */

/* ---------------------------------------------------------------- */.


SUP (T18D416).





DESC (Correct Prompt On Max Lines value in Global Options)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 JUN 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Correct Prompt On Max Lines value in Global Options */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (TF51309).





DESC (SYSOUT CAPTURE OPTIONS MAX LINES ENTRY 2 INCORRECT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SYSOUT CAPTURE OPTIONS MAX LINES ENTRY 2 INCORRECT */

/* ---------------------------------------------------------------- */

/* When a value is entered for "Max Lines" on the */

/* second entry of the Sysout Capture Options, the */

/* value that is written to the database is incorrect. */

/* ---------------------------------------------------------------- */.


PRE (QO89471)

SUP (T5EA028).





DESC (EVENTS NOT TRIGGERED DURING TABLE ACTIVATION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENTS NOT TRIGGERED DURING TABLE ACTIVATION */

/* ---------------------------------------------------------------- */

/* Activating a JTS table may cause dataset or message */

/* triggers to be missed or condition code filtering */

/* processes to fail. */

/* ---------------------------------------------------------------- */.


PRE (QO86119,QO88475)

SUP (T5EA002).





DESC (KEY 8 CSA)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Remove use of Key-8 CSA from all Jobtrac programs. */

/* --------------------------------------------------- */

/* In order to apply this maintenance, the Jobtrac */

/* internals must be unloaded by performing a Jobtrac */

/* system backout ( F jtstcname,BACK ) or an IPL. If */

/* you elect to perform an IPL, please do not start */

/* Jobtrac or explicitly load the Jobtrac internals */

/* until after this maintenance has been applied. */

/* ---------------------------------------------------------------- */.


PRE (QO89730,QO88464)

SUP (T5U5079).





DESC (S0C2 IN GCSLOP RUNNING GJTRCONV OR GJTRMAJC)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C2 IN GCSLOP RUNNING GJTRCONV OR GJTRMAJC */

/* ---------------------------------------------------------------- */

/* A S0C1 abend may occur during execution of the */

/* conversion program, GJTRCONV. Also, a S0C2 abend */

/* may occur during execution of the GJTRMAJC utility */

/* program. In either case, the underlying abend is a */

/* S0C2 in GCSLOP. */

/* ---------------------------------------------------------------- */.


PRE (QO89757)

SUP (T5EA026).





DESC (S0C4 ABEND IN GJTRTSVD WHEN USING "F" LINE COMMAND.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 ABEND IN GJTRTSVD WHEN USING "F" LINE COMMAND. */

/* ---------------------------------------------------------------- */

/* USAGE OF "F" LINE COMMAND (TO DISPLAY THE "TRIGGER */

/* LIST" OF THE ADR TABLE) WILL RESULT IN ABEND S0C4. */

/* ---------------------------------------------------------------- */.


PRE (QO88266,QO89757)

SUP (T18D409).





DESC (SYSOUT CAPTURE: LINE COUNT INCORRECT AFTER TRAC196A)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SYSOUT CAPTURE: LINE COUNT INCORRECT AFTER TRAC196A */

/* ---------------------------------------------------------------- */

/* IF "MAX LINES" IS REACHED DURING SYSOUT CAPTURE AND */

/* IF "Y" IS REPLIED TO WTOR TRAC196A, THEN THE "LINE */

/* COUNT" ON THE "SYSOUT CAPTURE" PANEL WILL BE WRONG. */

/* ---------------------------------------------------------------- */.


SUP (T5EA021).





DESC (EVENTS ARCHIVED REGARDLESS OF T= PARAMETER VALUES)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENTS ARCHIVED REGARDLESS OF T= PARAMETER VALUES */

/* ---------------------------------------------------------------- */

/* The Jobtrac event archival program is archiving */

/* events regardless of the date / time range (T=) */

/* parameter. */

/* ---------------------------------------------------------------- */.


SUP (T5EA024).





DESC (SYSOUT CAPTURE FILE FULL AND CAN NOT ARCHIVE W/ARCH)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SYSOUT CAPTURE FILE FULL AND CAN NOT ARCHIVE W/ARCH */

/* ---------------------------------------------------------------- */

/* If the SYSOUT capture file fills during normal */

/* Jobtrac operation or is full when Jobtrac is */

/* started, message TRAC096A is issued. Responding */

/* "ARCH" to archive the SYSOUT capture data does not */

/* archive the data. */

/* ---------------------------------------------------------------- */.


SUP (T5EA025).





DESC (ISPF: S0C4 POSSIBLE WHEN DISPLAYING "PURGED" EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF: S0C4 POSSIBLE WHEN DISPLAYING "PURGED" EVENT. */

/* ---------------------------------------------------------------- */

/* USAGE OF ANY LINE COMMAND ON THE SED PANEL FOR A */

/* PURGED EVENT MAY RESULT IN ABEND S0C4 IN GJTREVWT. */

/* ---------------------------------------------------------------- */.


PRE (QO89777)

SUP (T18D420).





DESC (GJTRMAJC MAY NOT ALWAYS DELETE OR LIST ALL MEMBERS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRMAJC MAY NOT ALWAYS DELETE OR LIST ALL MEMBERS. */

/* ---------------------------------------------------------------- */

/* NOT ALL REQUIRED MEMBERS FROM THE TEMPORARY-USE JCL */

/* FILE WILL BE DELETED AND/OR LISTED. */

/* ---------------------------------------------------------------- */.


SUP (T18D422).





DESC (JOBTRAC START-UP PARAMETER "OPTS=NN" DOESN'T WORK.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOBTRAC START-UP PARAMETER "OPTS=NN" DOESN'T WORK. */

/* ---------------------------------------------------------------- */

/* IF FOR EXAMPLE PARM='OPTS=11' IS USED, THE OPTIONS */

/* OF MEMBER "JOBTRA11" AREN'T USED, BUT THE PREVIOUS */

/* ACTIVE OPTIONS OR MEMBER "JOBTRA00" WILL BE TAKEN. */

/* IF MEMBER "JOBTRA00" DOESN'T EXIST IN TRACPARM/DD, */

/* THEN ERROR MESSAGE "TRAC406E" WILL BE ISSUED. */

/* ---------------------------------------------------------------- */.


PRE (QO89757)

SUP (T18D398).





DESC (COMPLETION PROCESSING LOOPS IF SUCC EVENT = EVENT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 JUL 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* COMPLETION PROCESSING LOOPS IF SUCC EVENT = EVENT */

/* ---------------------------------------------------------------- */

/* If an SCL successor event name and version is the */

/* same as the base event name and version, */

/* predecessor and successor elements will be created */

/* that have the same event name, OSD and version as */

/* the primary event. This results in a loop during */

/* completion processing. Datacom message "DB00113I - */

/* BACKOUT..." is issued until Jobtrac is stopped and */

/* the event is deleted. This also corrects a possible */

/* S0C7 in GJTRVAUT. */

/* ---------------------------------------------------------------- */.


PRE (QO88266,QO89757)

SUP (T5EA016).





DESC (SUPPORT FOR NEW TOP-LINE COMMANDS VIEW AND VIEWDB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SUPPORT FOR NEW TOP-LINE COMMANDS VIEW AND VIEWDB. */

/* ---------------------------------------------------------------- */

/* THEY REPLACE THE OLD COMMANDS SAR AND SARDB, WHICH */

/* DO STILL EXIST FOR COMPATIBILITY. */

/* ---------------------------------------------------------------- */.


PRE (QO89826)

SUP (T18D413).





DESC (EXECUTION OF CMDSET CAUSES ABEND S0C4 IN GJTRAUTO.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EXECUTION OF CMDSET CAUSES ABEND S0C4 IN GJTRAUTO. */

/* ---------------------------------------------------------------- */

/* EXECUTION OF CMDSETS (MODIFY COMMAND "F JT,CMDSET") */

/* WILL RESULT IN ABEND S0C4 IN GJTRAUTO AND THE ERROR */

/* MESSAGES TRAC200C, TRAC404C AND TRAC112E. */

/* ---------------------------------------------------------------- */.


PRE (QO89730)

SUP (T18D404).





DESC (EXECUTION OF MVS COMMANDS FROM "CMDSETS" MAY FAIL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EXECUTION OF MVS COMMANDS FROM "CMDSETS" MAY FAIL. */

/* ---------------------------------------------------------------- */

/* MVS CONSOLE COMMANDS CAN BE GROUPED TOGETHER AS A */

/* MEMBER OF FILE "TRACMDS/DD", CALLED "CMDSETS". THEY */

/* WILL BE ISSUED WITH MODIFY "F JOBTRAC,CMDSET". THE */

/* EXECUTION OF THE ONE OR OTHER COMMAND MAY FAIL. */

/* ---------------------------------------------------------------- */.


PRE (QO89993)

SUP (T18D408).





DESC ("D T" DEFINED FOR 0000, BUT ISSUED AT 0430)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "D T" DEFINED FOR 0000, BUT ISSUED AT 0430 */

/* ---------------------------------------------------------------- */

/* THE DEFAULT SYSTEM COMMAND ("D T") IS ISSUED AT EOM */

/* ("END-OF-MONTH") AT "04:30" INSTEAD OF MIDNIGHT. */

/* ---------------------------------------------------------------- */.


PRE (QO89730)

SUP (T5EA020).





DESC (SYSOUT CAPTURE: PREVENT LOOP FOR WTOR 'TRAC196A'.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SYSOUT CAPTURE: PREVENT LOOP FOR WTOR 'TRAC196A'. */

/* ---------------------------------------------------------------- */

/* SYSOUT CAPTURE FOR FILES WITH RECFM=U/V INCLUDING A */

/* DUMMY RECORD (OF LENGTH 0) MAY CAUSE AN OVERLAY, SO */

/* THAT THE REPLY "Y/N" FOR WTOR TRAC196A WON'T BE RE- */

/* COGNIZED ANYMORE, CAUSING A LOOP FOR THIS WTOR. */

/* ---------------------------------------------------------------- */.


PRE (QO89801)

SUP (T5EA022).





DESC (SCS (SYSTEM COMMAND SCHED.) COMMAND MAY BE SKIPPED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 JUL 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* SCS (SYSTEM COMMAND SCHED.) COMMAND MAY BE SKIPPED. */

/* ---------------------------------------------------------------- */

/* DURING PERIODS OF HIGH ACTIVITY OR JTS TABLE LOADS, */

/* TIME SPECIFIC SCS COMMANDS MAY BE MISSED. */

/* ---------------------------------------------------------------- */.


PRE (QO90008)

SUP (T5EA018).





DESC (CYC/HOL CALENDAR ENTRIES DELETED IF NO DFLT EXISTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 JUL 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* CYC/HOL CALENDAR ENTRIES DELETED IF NO DFLT EXISTS */

/* ---------------------------------------------------------------- */

/* If no default entry (location 000) exists for the */

/* cyclic / holiday calendars, the calendars will not */

/* be properly displayed by the "SYS CYCS"/"SYS HOLS" */

/* commands. Messages JOBV128 and JOBV129 will be */

/* displayed and the default calendar will be shown in */

/* the panel. If PF3 is then pressed, the existing */

/* calendar entries will be deleted and replaced with */

/* the default entry. */

/* ---------------------------------------------------------------- */.


SUP (T5EA030).





DESC (ABEND CODE MISSING FROM TRACWARN MESSAGE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 JUL 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND CODE MISSING FROM TRACWARN MESSAGE */

/* ---------------------------------------------------------------- */

/* If a job step abends with a user or a system abend */

/* the abend code is missing from the TRACWARN */

/* message. */

/* ---------------------------------------------------------------- */.


PRE (QO88475,QO89730)

SUP (T5EA031).





DESC (EDEP FEATURE: EDEP'S IMODS NEVER START TO EXECUTE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EDEP FEATURE: EDEP'S IMODS NEVER START TO EXECUTE. */

/* ---------------------------------------------------------------- */

/* AN IMOD CONNECTED TO AN EVENT AS AN EDEP WILL NEVER */

/* BE EXECUTED: ITS STATUS REMAINS "NOT SCHEDULED" AND */

/* THE EVENT'S STATUS REMAINS "AWAITING DEPENDENCIES". */

/* AN EDEP DEFINED WITH "E" (NOT "ED=") AS REFERBACK */

/* ENTRY WILL NOT BE ATTACHED. ALSO, THE SED(ISPLAY) */

/* PANEL DOESN'T SHOW AN I-DEP REQUIREMENT. */

/* ---------------------------------------------------------------- */.


PRE (QO88873,QO89826,QO89882)

SUP (T18D419).





DESC (PRIMARY SELECTION COMMAND "D=" NOT WORKING PROPERLY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PRIMARY SELECTION COMMAND "D=" NOT WORKING PROPERLY */

/* ---------------------------------------------------------------- */

/* IF MULTIPLE SELECTION CODES ARE ENTERED FOR EXAMPLE */

/* "D=JO", THEN EVENTS WITH A J-DEP MIGHT BE MISSING. */

/* EVENTS WITH AN E-DEP OR H-DEP ARE NEVER SELECTED. */

/* ---------------------------------------------------------------- */.


PRE (QO90293)

SUP (T18D424).





DESC (EDEP NOT ADDED IF FINAL "/" NOT SPECIFIED ON ED=)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EDEP NOT ADDED IF FINAL "/" NOT SPECIFIED ON ED= */

/* ---------------------------------------------------------------- */

/* If an environmental dependency referback (ED=) SCL */

/* statement does not specify the final slash after */

/* the retry interval, the EDEP is not added to the */

/* event. However, the sysout from the schedule load */

/* indicates that the EDEP was successfully added to */

/* the event. */

/* ---------------------------------------------------------------- */.


PRE (QO90293)

SUP (T5EA017).





DESC (ENVIRONMENTAL DEPENDENCY ARG NOT PASSED TO IMOD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ENVIRONMENTAL DEPENDENCY ARG NOT PASSED TO IMOD */

/* ---------------------------------------------------------------- */

/* If an argument is specified for an environmental */

/* dependency, the argument is not passed to the IMOD. */

/* ---------------------------------------------------------------- */.


PRE (QO90293)

SUP (T5EA036).





DESC (ABENDS S978 AND S0C4 RELATED TO THE BUSGRP COMMAND.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABENDS S978 AND S0C4 RELATED TO THE BUSGRP COMMAND. */

/* ---------------------------------------------------------------- */

/* ABENDS S978 OR S0C4 MAY HAPPEN, WHEN DISPLAYING THE */

/* BUSINESS GROUP STATUS PANEL (SEE "BUSGRP" COMMAND). */

/* ---------------------------------------------------------------- */.


PRE (QO90340)

SUP (T18D425).





DESC (MESSAGE "EVENT CHANGE IGNORED" IF EVENT GOES LATE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE "EVENT CHANGE IGNORED" IF EVENT GOES LATE */

/* ---------------------------------------------------------------- */

/* If an event is being edited and goes late before */

/* the changes are saved, message "EVENT CHANGE */

/* IGNORED" (GJTRA013 The event was updated while you */

/* were making your change.) is issued. The event edit */

/* must be cancelled to continue. */

/* ---------------------------------------------------------------- */.


SUP (T5EA027).





DESC (ABEND S0C9 IN GJTRAUTO MAY HAPPEN AFTER START-UP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 AUG 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C9 IN GJTRAUTO MAY HAPPEN AFTER START-UP. */

/* ---------------------------------------------------------------- */

/* IT WILL OCCUR IN GJTRAUTO+X'7DE' AFTER PTF QO90097. */

/* ---------------------------------------------------------------- */.


PRE (QO90097)

SUP (T18D427).





DESC (EVENT STATUS REMAINS WAIT EXEC WHEN JOB IS PURGED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT STATUS REMAINS WAIT EXEC WHEN JOB IS PURGED */

/* ---------------------------------------------------------------- */

/* If a job is waiting to be executed and the job is */

/* purged with the JES $P command the Jobtrac event */

/* status will remain "WAIT EXEC" rather than being */

/* changed to "OPERATOR PURGE". */

/* ---------------------------------------------------------------- */.


PRE (QO88475)

SUP (T5EA038).





DESC (INCORRECT FMID WILL BE LISTED ON GJTRJARC'S REPORTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* INCORRECT FMID WILL BE LISTED ON GJTRJARC'S REPORTS */

/* ---------------------------------------------------------------- */

/* "CHD4000" APPEARS ON THE HEADLINE OF THESE REPORTS. */

/* ---------------------------------------------------------------- */.


PRE (QO89804)

SUP (T18D418).





DESC (ABEND S0C4 IN GJTRVWTR MAY HAPPEN DURING START-UP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C4 IN GJTRVWTR MAY HAPPEN DURING START-UP. */

/* ---------------------------------------------------------------- */

/* THE PSW AT TIME OF THIS ERROR INCLUDES AN ADDRESS */

/* OF X'00404040', AND JOBTRAC WILL SHUT DOWN AFTER */

/* MESSAGE "CA-JOBTRAC - SUBTASK GJTRVWTR ENDED...". */

/* ---------------------------------------------------------------- */.


PRE (QO90010)

SUP (T18D429).





DESC (PRIMARY SELECTION COMMAND "K=" NOT WORKING PROPERLY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PRIMARY SELECTION COMMAND "K=" NOT WORKING PROPERLY */

/* ---------------------------------------------------------------- */

/* IF MULTIPLE SELECTION CODES ARE ENTERED FOR EXAMPLE */

/* "K=CA", THEN THE COMPLETED EVENTS WON'T BE LISTED, */

/* ONLY THE ABENDED ONES. HOWEVER, "K=AC" WORKS FINE. */

/* ---------------------------------------------------------------- */.


PRE (QO90382)

SUP (T18D434).





DESC (EVENT ADDED WITH GJTRABTR GETS "J" DEPENDENCY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT ADDED WITH GJTRABTR GETS "J" DEPENDENCY */

/* ---------------------------------------------------------------- */

/* When an event is added with the GJTRABTR utility, */

/* the event gets a "J" dependency if an alternate */

/* member name is not explicitly specified. */

/* ---------------------------------------------------------------- */.


SUP (T5EA032).





DESC (ORPHANED / DELETED DATA RESTORED DURING CONVERSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ORPHANED / DELETED DATA RESTORED DURING CONVERSION */

/* ---------------------------------------------------------------- */

/* Under certain conditions JTS tables that have been */

/* orphaned or records that have been "soft deleted" */

/* may be improperly restored during the conversion */

/* process. */

/* ---------------------------------------------------------------- */.


SUP (T5EA029).





DESC (REPORTING INTERVAL IS INCORRECT IN REPORT GJTREZST)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REPORTING INTERVAL IS INCORRECT IN REPORT GJTREZST */

/* ---------------------------------------------------------------- */

/* The time shown in the reporting interval on the */

/* statistics report GJTREZST is incorrect. */

/* ---------------------------------------------------------------- */.


SUP (T5EA033).





DESC (GSO EVENT CALENDAR USES INCORRECT HOL/CYC CALENDAR)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GSO EVENT CALENDAR USES INCORRECT HOL/CYC CALENDAR */

/* ---------------------------------------------------------------- */

/* When the "K" command is used in GSO to display the */

/* event forecast calendar, the location 000 (default) */

/* holiday and cyclic calendars are always used. */

/* ---------------------------------------------------------------- */.


SUP (T5EA035).





DESC (SCL LOAD: GLOBAL CONTROLS @WORKD/@WDNNN DON'T WORK.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL LOAD: GLOBAL CONTROLS @WORKD/@WDNNN DON'T WORK. */

/* ---------------------------------------------------------------- */

/* USE OF GLOBAL CONTROL RECORDS @WORKD=/@WDNNN= WILL */

/* RESULT IN RC=8 AND MESSAGE TRAC005A (AT SCL LOAD). */

/* ALSO, TEXT CORRECTIONS TO TWO WARNING MESSAGES. */

/* ---------------------------------------------------------------- */.


PRE (QO90341)

SUP (T18D430).





DESC (Correct abend 0CA in GJTRDCOM)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Correct abend 0CA in GJTRDCOM */

/* ---------------------------------------------------------------- */

/* decimal overflow occurs in GJTRDCOM at +A8E update */

/* counter field overflow */

/* ---------------------------------------------------------------- */.


SUP (T5DR014).





DESC (STATUS: ALL ZEROS ARE SUPPRESSED FOR SOME % FIELDS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 AUG 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* STATUS: ALL ZEROS ARE SUPPRESSED FOR SOME % FIELDS. */

/* ---------------------------------------------------------------- */

/* ALL ZEROS ARE SUPPRESSED FOR THE PERCENTAGE VALUES */

/* OF THE CAPTURE FILE ON THE STATUS PANEL, SO THAT */

/* FOR EXAMPLE " %" IS DISPLAYED (INSTEAD OF "0%"). */

/* ---------------------------------------------------------------- */.


SUP (T18D433).





DESC (INTERVAL JOB MAY END EARLY IF ASAP TIME SPECIFIED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* INTERVAL JOB MAY END EARLY IF ASAP TIME SPECIFIED */

/* ---------------------------------------------------------------- */

/* An interval job may end early if a starting time of */

/* ASAP is specified. */

/* ---------------------------------------------------------------- */.


SUP (T5EA034).





DESC (MESSAGE GJTRJARP/012E-0036; IS NOT VALID SUPPL TYPE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE GJTRJARP/012E-0036; IS NOT VALID SUPPL TYPE */

/* ---------------------------------------------------------------- */

/* RUNNING ARCHIVE UTILITY GJTRJARC WITH OPTION FULL */

/* (OR SUMM) WILL ISSUE ABOVE MENTIONED ERROR MESSAGE */

/* FOR AN EVENT WITH A MUTUALLY EXCLUSIVE REQUIREMENT */

/* OR FOR AN NJE JOB, WHEN EXECUTING AT THAT TIME. */

/* ---------------------------------------------------------------- */.


SUP (T18D431).





DESC (ARCHIVE TASK REMOVES ARGUMENTS FROM INTERVAL EVENTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE TASK REMOVES ARGUMENTS FROM INTERVAL EVENTS */

/* ---------------------------------------------------------------- */

/* IF AN INTERVAL EVENT HAS ARGUMENTS, ISN'T COMPLETE */

/* YET (NO MESSAGE TRAC018I), BUT SOME ITERATIONS DID */

/* ALREADY RUN, THEN RUNNING THE ARCHIVE TASK AT THIS */

/* TIME WILL CAUSE THE ARGUMENTS TO BE DELETED. */

/* ---------------------------------------------------------------- */.


PRE (QO89804)

SUP (T18D426).





DESC (RETRY FEATURE NOT WORKING FOR IMOD'S USED AS EDEP'S)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* RETRY FEATURE NOT WORKING FOR IMOD'S USED AS EDEP'S */

/* ---------------------------------------------------------------- */

/* THE GLOBAL OPTIONS DEFINE "REXX RETRY INTERVAL" AND */

/* "REXX RETRY MAXIMUM COUNT", BUT A FAILING IMOD USED */

/* AS ENVIRONMENTAL DEPENDENCY (EDEP) WASN'T RETRIED. */

/* ALSO, PANEL "GJTREDEP" DISPLAYED "NOT SCHEDULED" IN */

/* CASE OF "CANCELED DUE TO RETRY COUNT". */

/* ---------------------------------------------------------------- */.


PRE (QO90367)

SUP (T18D436).





DESC (ABEND 80A-10 IN GSS ADDRESS SPACE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND 80A-10 IN GSS ADDRESS SPACE */

/* ---------------------------------------------------------------- */

/* A system abend 80A-10 may occur in the GSS address */

/* space caused by many copies of program GJTRSQLT */

/* being loaded. */

/* ---------------------------------------------------------------- */.


PRE (QO90743)

SUP (T5EA037).





DESC (TRACWARN MESSAGE DISPLAYED FOR NJE JOBS IMMEDIATELY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACWARN MESSAGE DISPLAYED FOR NJE JOBS IMMEDIATELY */

/* ---------------------------------------------------------------- */

/* NJE JOBS WILL BE FLAGGED WITH A J-DEP REQUIREMENT */

/* RIGHT AFTER THEIR ROUTING TO THE REMOTE SYSTEM AND */

/* BEFORE FEEDBACK IS RETURNED FROM THE REMOTE SYSTEM. */

/* ---------------------------------------------------------------- */.


PRE (QO90615)

SUP (T18D440).





DESC (ARCHIVE REPORT: ALWAYS SCHEDULED TIME SHOWN AS TIME)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE REPORT: ALWAYS SCHEDULED TIME SHOWN AS TIME */

/* ---------------------------------------------------------------- */

/* THE "SCHEDULED TIME" IS ALSO DISPLAYED AS SUBMIT, */

/* START AND END TIME ON THE REPORT "GJTRJARC-01" */

/* INSTEAD OF THE CORRECT TIME VALUES. */

/* ---------------------------------------------------------------- */.


PRE (QO90968)

SUP (T18D432).





DESC (ABEND S0C4 POSSIBLE AT SUBMISSION OF PANVALET JOBS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C4 POSSIBLE AT SUBMISSION OF PANVALET JOBS. */

/* ---------------------------------------------------------------- */

/* IF THE JCL OF A JOB RESIDES IN A PANVALET LIBRARY, */

/* THEN A S0C4 ABEND MAY OCCUR AT SUBMISSION TIME. */

/* ---------------------------------------------------------------- */.


SUP (T18D441).





DESC (ABEND SD22-08 POSSIBLE WHEN EXECUTING SCS COMMANDS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND SD22-08 POSSIBLE WHEN EXECUTING SCS COMMANDS. */

/* ---------------------------------------------------------------- */

/* SCS COMMANDS BEING LONGER THAN 122 CHARACTERS WILL */

/* RESULT IN ABEND SD22-08 DURING THEIR EXECUTION. */

/* ---------------------------------------------------------------- */.


PRE (QO90524)

SUP (T18D443).





DESC (FAILING STEP NUMBER INCORRECT ON TRACWARN MESSAGE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FAILING STEP NUMBER INCORRECT ON TRACWARN MESSAGE. */

/* ---------------------------------------------------------------- */

/* THE TRACWARN MESSAGE DOES NOT DISPLAY THE CORRECT */

/* STEP NUMBER IN CASE OF CONDITION CODE FAILURES. */

/* ---------------------------------------------------------------- */.


PRE (QO90101)

SUP (T18D445).





DESC (GET AND QUERY DON'T RETURN THE NEXT EVENT FOR V(N).)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GET AND QUERY DON'T RETURN THE NEXT EVENT FOR V(N). */

/* ---------------------------------------------------------------- */

/* IF "VERSION(NEXT)" IS SPECIFIED FOR THE FUNCTIONS */

/* GET OR QUERY OF THE BATCH UTILITY GJTRABTR, THEN */

/* ALWAYS THE SAME EVENT IS DISPLAYED, BUT NOT THE */

/* NEXT ONE OR A RETURN CODE OF 8, IF NONE EXISTS. */

/* ALSO, THE BATCH UTILITY ALWAYS TERMINATES WITH */

/* RC=0, EVEN IF AN ERROR MESSAGE IS ISSUED. */

/* ---------------------------------------------------------------- */.


PRE (QO91169)

SUP (T18D437).





DESC (TYPE 'E' INCORRECTLY USED AS DEFAULT FOR INTERVALS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TYPE 'E' INCORRECTLY USED AS DEFAULT FOR INTERVALS. */

/* ---------------------------------------------------------------- */

/* IF NO "INTERVAL TYPE" IS DEFINED, THEN "E" IS USED */

/* INSTEAD OF "S". THE "INTERVAL RANGE START TIME" IS */

/* DISPLAYED IN MINUTES, NOT HHMM. A NON-INTERVAL JOB */

/* SHOWS SOME INTERVAL RELATED DATA ON THE SED PANEL. */

/* ---------------------------------------------------------------- */.


PRE (QO90888)

SUP (T18D447).





DESC (GJTRABTR: GET/QUERY NOT CORRECT FOR GENERIC REQ'S.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: GET/QUERY NOT CORRECT FOR GENERIC REQ'S. */

/* ---------------------------------------------------------------- */

/* THE BATCH UTILITY GJTRABTR DOESN'T RETURN CORRECT */

/* RESULTS IN CASE OF "NOT FOUND" CONDITIONS AND FOR */

/* GENERIC REQUESTS WITH PARAMETER "VERSION(NEXT)". */

/* ---------------------------------------------------------------- */.


PRE (QO91501)

SUP (T18D438).





DESC (REVERSE CONVERSION: PRED COUNT MAY NOT BE CORRECT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION: PRED COUNT MAY NOT BE CORRECT. */

/* ---------------------------------------------------------------- */

/* THE "PRED COUNT" IS INCORRECT ON THE RELEASE 3.5 */

/* CHECKPOINT FILE AFTER REVERSE CONVERSION IN CASE OF */

/* INCOMPLETE PREDECESSORS; THE P-DEP FLAG IS SET. */

/* ---------------------------------------------------------------- */.


SUP (T18D444).





DESC (THRESHOLDS T/S/A NOT CORRECT, EARLY ABORT POSSIBLE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* THRESHOLDS T/S/A NOT CORRECT, EARLY ABORT POSSIBLE. */

/* ---------------------------------------------------------------- */

/* USE OF THE TIME THRESHOLD "T" IN CONJUNCTION WITH A */

/* SUCCESSOR JOB MAY ABORT THE JOB BEFORE SUBMISSION. */

/* ---------------------------------------------------------------- */.


PRE (QO91533)

SUP (T18D448).





DESC (ABORT PROCESSING POSSIBLE FOR TIME THRESHOLDS T/S.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 SEP 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABORT PROCESSING POSSIBLE FOR TIME THRESHOLDS T/S. */

/* ---------------------------------------------------------------- */

/* THRESHOLD TYPES T AND S MAY ABORT AN EVENT. */

/* OSD/DATE MAY BE MISSING FOR MESSAGE TRAC102W. */

/* ---------------------------------------------------------------- */.


PRE (QO91533,QO90293,QO90388)

SUP (T18D449).





DESC (Support IPV6; Fix Interval Job Handling in email)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Support IPV6; Fix Interval Job Handling in email */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (T241002).





DESC (TRAC051E HAS INCORRECT ABEND)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC051E HAS INCORRECT ABEND */

/* ---------------------------------------------------------------- */

/* If a job ends with a JCL error, max condition code, */

/* system abend or user abend, message TRAC051E always */

/* indicates a user abend has occurred. */

/* ---------------------------------------------------------------- */.


PRE (QO91752)

SUP (T5EA006).





DESC (*DYNAMIC*: NBR OF INCOMPLETE PREDECESSORS NOT SHOWN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* *DYNAMIC*: NBR OF INCOMPLETE PREDECESSORS NOT SHOWN */

/* ---------------------------------------------------------------- */

/* R11 ALLOWS TO DEFINE AN UNLIMITED NUMBER OF PREDE- */

/* CESSORS WHICH WILL BE DENOTED BY FLAG *DYNAMIC* ON */

/* SED PANEL. THIS CHANGE ADDS THE CURRENT NUMBER OF */

/* INCOMPLETE PREDECESSORS TO THIS FLAG DURING THE */

/* INITIAL DISPLAY OF THE SED(ETAIL) PANEL. */

/* ---------------------------------------------------------------- */.


PRE (QO89823,QO88266)

SUP (T18D450).





DESC (CHANGE FOR VARIABLE EMAIL SERVER PORT NUMBER.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CHANGE FOR VARIABLE EMAIL SERVER PORT NUMBER. */

/* ---------------------------------------------------------------- */

/* A NEW OPTION IN MEMBER JOBTRANN (CALLED EMAILPORT) */

/* AND A NEW INPUT CONTROL CARD (LIKE "PORT:NNN") FOR */

/* THE BATCH EMAIL TEST UTILITY ALLOWS TO SPECIFY A */

/* DIFFERENT EMAIL SERVER PORT NUMBER; DEFAULT IS 25. */

/* ---------------------------------------------------------------- */.


PRE (QO89825,QO91752)

SUP (T18D435).





DESC (EMAIL SENT BY JOBTRAC DOESN'T DISPLAY BUSINESS GRP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EMAIL SENT BY JOBTRAC DOESN'T DISPLAY BUSINESS GRP. */

/* ---------------------------------------------------------------- */

/* BLANKS ARE SHOWN FOR THE BUSGRP ON JOBTRAC'S MAILS. */

/* ---------------------------------------------------------------- */.


PRE (QO91901,QO91752)

SUP (T18D446).





DESC (SCL CONTINUATION DATES/PRED/SUCC/OSD/VER INCORRECT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 OCT 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* SCL CONTINUATION DATES/PRED/SUCC/OSD/VER INCORRECT */

/* ---------------------------------------------------------------- */

/* This APAR corrects the following SCL-related errors */

/* - Target/start date in event element is overwritten */

/* if date is specified on PRED/SUCC continuation - */

/* Event version is overwritten if version number is */

/* specified on PRED/SUCC continuation - PRED/SUCC is */

/* created with an incorrect date if a date is */

/* specified on PRED/SUCC continuation. This results */

/* in a PRED/SUCC not being properly tied to the event */

/* - "R" conditional operator does not work properly - */

/* If a "T" threshold is specified on a continuation */

/* card, the card may be ignored with message "* NO */

/* UPDATE MADE, JOB NOT SCHEDULED *" - If a date */

/* override is used and the adjustment crosses a year */

/* boundary, the current year is still used. This is */

/* true for target, start, abort, and PRED/SUCC OSD */

/* dates. */

/* ---------------------------------------------------------------- */.


PRE (QO91597)

SUP (T5EA040).





DESC (JOBS RUN IMMEDIATELY IF HOLIDAY ACTION IS N, P, OR W)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 OCT 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* JOBS RUN IMMEDIATELY IF HOLIDAY ACTION IS N, P, OR */

/* W */

/* ---------------------------------------------------------------- */

/* If a job is scheduled with a future date / time and */

/* a holiday action code of 'N', 'P' or 'W', the job */

/* may be submitted immediately (if no additional */

/* dependencies exist). */

/* ---------------------------------------------------------------- */.


PRE (QO92219)

SUP (T5EA041).





DESC (EVENTS W/HARDCODED VERSIONS MAY CAUSE VRSN CONFLICTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENTS W/HARDCODED VERSIONS MAY CAUSE VRSN */

/* CONFLICTS */

/* ---------------------------------------------------------------- */

/* If an event is defined in an SCL member without a */

/* hardcoded version number and another event with the */

/* same name is defined later in the SCL member (or a */

/* nested SCL member) with a hardcoded version number, */

/* a version number conflict may occur. The output */

/* from the schedule load indicates both events are */

/* added, but the event with the conflicting version */

/* number is not added to the checkpoint. Message */

/* TRAC176I is issued. */

/* ---------------------------------------------------------------- */.


PRE (QO89826)

SUP (T5EA043).





DESC (SCHEDULE LOAD LOOPS IF PROCESSING PERIOD IS @EVTNAME)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCHEDULE LOAD LOOPS IF PROCESSING PERIOD IS */

/* @EVTNAME */

/* ---------------------------------------------------------------- */

/* If a schedule uses a processing period @EVTNAME */

/* where EVTNAME is the name of a scheduled event, a */

/* loop may occur during the schedule load. */

/* ---------------------------------------------------------------- */.


PRE (QO92279)

SUP (T5EA042).





DESC (Change JOBTRA00 STATINVL to STATINTV)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 OCT 2007 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* Change JOBTRA00 STATINVL to STATINTV */

/* ---------------------------------------------------------------- */

/* Change Jobtrac STC REGION=6144K to REGION=0M Change */

/* Jobtrac STC SYSUDUMP to SYSMDUMP Add EMAILPORT */

/* option to JOBTRA00 */

/* */

/* Note: Please follow instructions in ++HOLD */

/* ---------------------------------------------------------------- */.


SUP (TF51310).

++HOLD(TF51310) SYSTEM REASON(ACTION) FMID(CHDB000) COMMENT(

.If you are applying this APAR before installing Jobtrac r11:

. No additional changes are required.

.If you are applying this APAR to an existing Jobtrac r11:

. After applying this SYSMOD, the JOBTRA00 member of your

. PPOPTION dataset must be modified:

.o Change the name of the following parameter:

. from STATINVL=60

. _to_ STATINTV=60

.o Change the REGION parameter on your Jobtrac STC:

. from REGION=6144K

. _to_ REGION=0M

.o Change the dump DD statements in your Jobtrac STC:

. from //SYSUDUMP DD SYSOUT=*

. _to_ //SYSMDUMP DD DISP=SHR,DSN=SYS1.DUMP30

.o Add the following PARM to your JOBTRA00 member

. Add__ *EMAILPORT=nnnnn /* EMAIL PORT Default=25 */

. After *EMAILFROM=address /* RETURN ADDR DESCRIPt */

).





DESC (Genlevel changed to SP01..)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 OCT 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Genlevel changed to SP01.. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO86119,QO86694,QO87951,QO88082,QO88150,QO88188,

QO88266,QO88464,QO88475,QO88685,QO88686,QO88873,

QO88890,QO88992,QO89066,QO89470,QO89471,QO89599,

QO89730,QO89757,QO89761,QO89777,QO89801,QO89804,

QO89805,QO89823,QO89824,QO89825,QO89826,QO89882,

QO89993,QO90008,QO90009,QO90010,QO90097,QO90099,

QO90101,QO90293,QO90340,QO90341,QO90367,QO90382,

QO90388,QO90524,QO90615,QO90653,QO90654,QO90742,

QO90743,QO90869,QO90870,QO90871,QO90888,QO90918,

QO90928,QO90966,QO90968,QO91152,QO91153,QO91169,

QO91172,QO91255,QO91414,QO91415,QO91417,QO91501,

QO91533,QO91582,QO91583,QO91597,QO91598,QO91752,

QO91799,QO91800,QO91901,QO91989,QO92219,QO92279,

QO92288,QO92317,QO92344)

SUP (TF51312).





DESC (S106-0C POSSIBLE IF DATACOM IS DOWN WHILE JT IS UP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 DEC 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S106-0C POSSIBLE IF DATACOM IS DOWN WHILE JT IS UP. */

/* ---------------------------------------------------------------- */

/* ABEND S106 MAY OCCUR DURING JOBTRAC'S RECOVERY LOOP */

/* TO RECONNECT TO THE DATABASE WHILE THE MUF IS DOWN. */

/* ---------------------------------------------------------------- */.


PRE (QO90918)

SUP (T18D452).





DESC (SUBMIT POSSIBLE IF M-DEP SET WHILE AWAITING/SUBMIT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 DEC 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SUBMIT POSSIBLE IF M-DEP SET WHILE AWAITING/SUBMIT. */

/* ---------------------------------------------------------------- */

/* IF A JOB IS "AWAITING SUBMISSION" AND IF AN M-DEP */

/* IS ADDED AT THIS STAGE, THEN IT MAY HAPPEN THAT THE */

/* JOB WILL BE SUBMITTED DESPITE THE M-DEP. */

/* ---------------------------------------------------------------- */.


PRE (QO91598)

SUP (T18D455).





DESC (S0C7 ABEND MAY OCCUR FOR LINE COMMAND ON HIST PANEL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 DEC 2007 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND MAY OCCUR FOR LINE COMMAND ON HIST PANEL */

/* ---------------------------------------------------------------- */

/* USE OF TABLE TRACAUTH AND ENTERING ANY LINE COMMAND */

/* ON THE "EVENT HISTORY DISPLAY" PANEL (HIST COMMAND) */

/* MAY RESULT IN ABEND S0C7 IN MODULE GJTREVHI. */

/* ---------------------------------------------------------------- */.


PRE (QO88266)

SUP (T18D463).





DESC (Increase SPACE allocation for REXX samples)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 DEC 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* Increase SPACE allocation for REXX samples */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO92344)

SUP (TF51317).





DESC (CORRECT TRACMAC CONTINUATION CAUSING ASSEMBLY ERROR)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 DEC 2007 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* CORRECT TRACMAC CONTINUATION CAUSING ASSEMBLY ERROR */

/* ---------------------------------------------------------------- */

/* Correct continuation in TRACMAC to correct Assembly */

/* error in Stage 1 job. */

/* ---------------------------------------------------------------- */.


PRE (QO92344)

SUP (T5EA052,QO93496).





DESC (ABEND S878 MAY HAPPEN IF MANY CALENDARS ARE DEFINED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S878 MAY HAPPEN IF MANY CALENDARS ARE DEFINED */

/* ---------------------------------------------------------------- */

/* IF MANY HOLIDAY AND CYCLIC CALENDARS ARE DEFINED, */

/* AND IF MANY SCHEDULE LOADS ARE DONE WITHOUT RE- */

/* CYCLING JOBTRAC, THEN FINALLY ABEND S878 MAY OCCUR. */

/* ---------------------------------------------------------------- */.


PRE (QO92317)

SUP (T18D468).





DESC (S0C7 ABEND IN GJTRENF1 AFTER SUBMISSION OF NJE JOB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND IN GJTRENF1 AFTER SUBMISSION OF NJE JOB. */

/* ---------------------------------------------------------------- */

/* JOBTRAC MAY ABEND WITH S0C7 AFTER SUBMISSION OF AN */

/* NJE REMOTE JOB (WITH DD CARD "/*ROUTE XEQ LOCAL"). */

/* ---------------------------------------------------------------- */.


SUP (T18D478).





DESC (ADR/DSNS COMMAND DISPLAYS ACTION 'DCNT' AS 'PURG'.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ADR/DSNS COMMAND DISPLAYS ACTION 'DCNT' AS 'PURG'. */

/* ---------------------------------------------------------------- */

/* ACTION=DCNT WILL ERRONEOUSLY BE DISPLAYED AS 'PURG' */

/* BY TOP-LINE COMMAND ADR (SYNONYM FOR ADR IS DSNS). */

/* BY THE WAY, THE ACTION WILL BE PROCESSED CORRECTLY. */

/* ---------------------------------------------------------------- */.


PRE (QO89777)

SUP (T18D467).





DESC (AMR SAVE FAILS IF MESSAGE ID IS DUPLICATED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AMR SAVE FAILS IF MESSAGE ID IS DUPLICATED */

/* ---------------------------------------------------------------- */

/* If multiple AMR entries exist with the same message */

/* ID, an error occurs when the AMR table is saved. */

/* The short message is "ISPF ERROR" and the extended */

/* message is "JTSM325 Unknown error occurred during */

/* ISPF request for AMR table." */

/* ---------------------------------------------------------------- */.


SUP (T5EA045).





DESC (ISPF ERROR MESSAGE ISPP353 FOR HELP PANEL GJHSCC2.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF ERROR MESSAGE ISPP353 FOR HELP PANEL GJHSCC2. */

/* ---------------------------------------------------------------- */

/* REQUESTING HELP FOR THE "MAX CC" FIELD DESCRIPTION */

/* RESULTS IN ISPF ERROR MESSAGE ISPP353. */

/* ---------------------------------------------------------------- */.


SUP (T18D456).





DESC (S0C7 ABEND CAN OCCUR AFTER RUN OR ADD CMD FOR ISPF.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND CAN OCCUR AFTER RUN OR ADD CMD FOR ISPF. */

/* ---------------------------------------------------------------- */

/* IT MAY HAPPEN, IF THE CMD IS DONE WITH A VERSION */

/* LIKE "RUN JOBNAME.NN" AND IF THIS VERSION "NN" IS */

/* NOT NUMERIC. HOWEVER, IT DOESN'T ALWAYS OCCUR. */

/* ---------------------------------------------------------------- */.


PRE (QO90742)

SUP (T18D469).





DESC (MODIFY CMD DEL (REL/PRG/ADD) NOT WORKING CORRECTLY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MODIFY CMD DEL (REL/PRG/ADD) NOT WORKING CORRECTLY. */

/* ---------------------------------------------------------------- */

/* IF ONLY THE VERSION NUMBER IS SPECIFIED AND IF IT */

/* HAS MORE THAN 1 DIGITS (AS "F JT,DEL=JOBA.0012"), */

/* THEN THE DELETE WILL FAIL WITH MESSAGE TRAC017W. IF */

/* THE SAME EVENT EXISTS TWICE WITH VERSIONS FROM */

/* YESTERDAY AND TODAY, THEN "F JT,DEL=JOBB.MMDDNNNN" */

/* WILL DELETE THE EVENT FROM TODAY, EVEN THOUGH THE */

/* "MMDDNNNN" SPECIFIED THE EVENT FROM YESTERDAY. */

/* SIMILAR PROBLEMS WILL OCCUR FOR REL, PRG AND ADD. */

/* ---------------------------------------------------------------- */.


SUP (T18D451).





DESC (TRAC006I DOESN'T LIST EVENT NAME AFTER MODIFY/ADD=.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC006I DOESN'T LIST EVENT NAME AFTER MODIFY/ADD=. */

/* ---------------------------------------------------------------- */

/* IF AN EVENT IS ADDED WITH JOBTRAC'S MODIFY COMMAND */

/* "F JT,ADD=JOBA", THEN THE MESSAGE TRAC006I DOESN'T */

/* DISPLAY THE EVENT NAME BUT VERSION NUMBER ".00001". */

/* ---------------------------------------------------------------- */.


PRE (QO94211)

SUP (T18D457).





DESC (MONITOR CMDS: EITHER NO DATA RETURNED OR ABEND S0C4)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MONITOR CMDS: EITHER NO DATA RETURNED OR ABEND S0C4 */

/* ---------------------------------------------------------------- */

/* JOBTRAC'S MONITOR COMMANDS (LIKE ENQN, DSNQ, JOBQ) */

/* WILL EITHER NOT RETURN ANY DATA OR WILL ABEND WITH */

/* A S0C4 (SINCE Z/OS 1.8). */

/* ---------------------------------------------------------------- */.


SUP (T18D480).





DESC (YEAR NOT SHOWN IN VERSION ON EED, EHD AND NED PANEL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* YEAR NOT SHOWN IN VERSION ON EED, EHD AND NED PANEL */

/* ---------------------------------------------------------------- */

/* The Scheduled Event Detail shows the event version */

/* as "YYYYMMDD.VVVV" which includes the year. The */

/* Event Execution Detail, Event History Detail and */

/* NJE Execution Detail panels do not include the year */

/* in the event version. This fix adds the year to the */

/* version for these three panels to provide */

/* consistency with the Scheduled Event Detail panel. */

/* ---------------------------------------------------------------- */.


PRE (QO88266,QO93495)

SUP (T5EA050).





DESC (MODIFY "F JT,DUMP" CAUSES ABEND S806 FOR GJTRDBIO.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MODIFY "F JT,DUMP" CAUSES ABEND S806 FOR GJTRDBIO. */

/* ---------------------------------------------------------------- */

/* JOBTRAC'S MODIFY COMMAND "F JT,DUMP" CAUSES ABEND */

/* S806 FOR MODULE GJTRDBIO. ALSO, SNAPPED INFORMATION */

/* ABOUT "TRACUSI EXIT" INCLUDES GARBAGE. */

/* ---------------------------------------------------------------- */.


SUP (T18D473).





DESC (SED(ISPLAY) PANEL ALWAYS SHOWS "SUBMITTED 00:00".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SED(ISPLAY) PANEL ALWAYS SHOWS "SUBMITTED 00:00". */

/* ---------------------------------------------------------------- */

/* IF A JOB IS SUBMITTED BUT NOT RUNNING YET, THEN THE */

/* SED(ISPLAY) PANEL ALWAYS LISTS "SUBMITTED 00:00". */

/* ---------------------------------------------------------------- */.


PRE (QO94207)

SUP (T18D479).





DESC (STEP LEVEL CC CHECK FOR "LE" NOT WORKING CORRECTLY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 JAN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* STEP LEVEL CC CHECK FOR "LE" NOT WORKING CORRECTLY. */

/* ---------------------------------------------------------------- */

/* STEP LEVEL CONDITION CODE CHECKING ISN'T WORKING */

/* CORRECTLY IF THE OPERATOR "LE" IS BEING USED (FOR */

/* EXAMPLE "CC=003,LE,0008"). */

/* ---------------------------------------------------------------- */.


PRE (QO91417)

SUP (T18D453).





DESC (SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A. */

/* ---------------------------------------------------------------- */

/* "MAXIMUM CC" WILL ALWAYS BE DISPLAYED AS "0000". */

/* ---------------------------------------------------------------- */.


PRE (QO91598,QO91533)

SUP (T18D487).





DESC (CAN'T RESET OPT "D" OF "CATALOG ERROR CHECK (2RUD)")

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CAN'T RESET OPT "D" OF "CATALOG ERROR CHECK (2RUD)" */

/* ---------------------------------------------------------------- */

/* IT WILL ONLY HAPPEN, IF OPTION "NODELETE ERROR MSG" */

/* IS SET TO "Y". (SEE JT/ONLINE COMMAND "SYS O/1" TO */

/* DISPLAY OR MODIFY THE "GLOBAL OPTIONS"). */

/* ---------------------------------------------------------------- */.


PRE (QO89599)

SUP (T18D486).





DESC (NJE JOBS NOT TRACKED IF JT/R11 RUNS ON REMOTE NODE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE JOBS NOT TRACKED IF JT/R11 RUNS ON REMOTE NODE. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO88475,QO88873,QO91153,QO91989)

SUP (T18D483).





DESC (MESSAGE TRAC014E MAY INCLUDE GARBAGE AS REASON CODE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE TRAC014E MAY INCLUDE GARBAGE AS REASON CODE */

/* ---------------------------------------------------------------- */

/* IF THE JCL RESIDES IN A PANVALET OR LIBRARIAN FILE */

/* AND IF THERE WILL BE A PROBLEM (FOR EXAMPLE "MEMBER */

/* NOT FOUND"), THEN THE RESULTING MESSAGE TRAC014E */

/* MAY INCLUDE GARBAGE AS REASON CODE ("RC="). */

/* ---------------------------------------------------------------- */.


PRE (QO91414)

SUP (T18D459).





DESC (NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE */

/* ---------------------------------------------------------------- */

/* AN NJE SURROGATE RECORD IS CREATED FOR AN NJE JOB, */

/* WHICH IS NOT ROUTED TO A REMOTE SYSTEM (BECAUSE OF */

/* "/*ROUTE XEQ LOCAL"), AND THIS NJE SURROGATE EVENT */

/* WILL REMAIN IN "WAIT EXEC" STATUS FOREVER. */

/* ---------------------------------------------------------------- */.


PRE (QO93494)

SUP (T18D485).





DESC (SOME GARBAGE ON NJE EXECUTION DETAIL PANEL GJTREVNJ)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SOME GARBAGE ON NJE EXECUTION DETAIL PANEL GJTREVNJ */

/* ---------------------------------------------------------------- */

/* SOME INFORMATION IS DISPLAYED IN WRONGS FIELDS AS */

/* FOR EXAMPLE FOR "NODE NAME" OR "FAIL CODE". */

/* ---------------------------------------------------------------- */.


PRE (QO94373)

SUP (T18D484).





DESC (HIST: NO START TIME DISPLAYED FOR SCHEDULED SCL'S.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* HIST: NO START TIME DISPLAYED FOR SCHEDULED SCL'S. */

/* ---------------------------------------------------------------- */

/* THE EVENT HISTORY DISPLAY PANEL DOESN'T SHOW ANY */

/* START TIME FOR SCL'S SCHEDULED VIA AN SCL MEMBER. */

/* ---------------------------------------------------------------- */.


SUP (T18D476).





DESC (NOTIFY/SEND MESSAGE INCLUDES DATA FROM PREVIOUS JOB)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NOTIFY/SEND MESSAGE INCLUDES DATA FROM PREVIOUS JOB */

/* ---------------------------------------------------------------- */

/* THE 'SEND' COMMAND (GENERATED BECAUSE OF "NOTIFY=Y" */

/* IN THE TRACAUTH TABLE) DISPLAYS INFORMATION ABOUT */

/* THE PREVIOUSLY EXECUTED JOB. */

/* ---------------------------------------------------------------- */.


PRE (QO94556)

SUP (T18D477).





DESC (ARCHIVE TASK CAN LEAVE ORPHANED "CCD" SUPPLEMENTS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE TASK CAN LEAVE ORPHANED "CCD" SUPPLEMENTS. */

/* ---------------------------------------------------------------- */

/* RUNNING THE ARCHIVE TASK FOR EVENTS WITH ATTACHED */

/* "CCD" RECORDS WILL LEAVE THE CCD SUPPLEMENT (FOR */

/* "CONDITION CODE" TESTING) ON THE CURRENT SCHEDULE. */

/* ALSO, THE "CLEAN" OPTION MAY MISS TO DELETE THE */

/* FOLLOWING SUPPLEMENTS: ARG, CPM, EDT, RSC OR EML. */

/* SEE ERROR MESSAGES ON ARCHIVE'S EXCEPTION REPORT. */

/* ---------------------------------------------------------------- */.


SUP (T18D454).





DESC ("BUSGRP" TRUNCATED ON EASYTRIEVE'S REPORT GJTREZJS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "BUSGRP" TRUNCATED ON EASYTRIEVE'S REPORT GJTREZJS. */

/* ---------------------------------------------------------------- */

/* THE "BUSINESS GROUP" DISPLAYED ON THE EASYTRIEVE */

/* REPORT GJTREZJS HAS THE FIRST TWO CHARS CUT OFF. */

/* ---------------------------------------------------------------- */.


SUP (T18D458).





DESC (SCS COMMANDS WON'T BE REPEATED IF INTERVAL IS GIVEN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCS COMMANDS WON'T BE REPEATED IF INTERVAL IS GIVEN */

/* ---------------------------------------------------------------- */

/* SCS COMMANDS WILL ONLY BE EXECUTED ONCE AT DEFINED */

/* START TIME; NO REPEAT OCCURS IF INTERVAL IS GIVEN. */

/* ---------------------------------------------------------------- */.


PRE (QO91415)

SUP (T18D465).





DESC (EMAIL LISTS ARCH/SCHD FOR JOBTRAC'S INTERNAL TASKS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EMAIL LISTS ARCH/SCHD FOR JOBTRAC'S INTERNAL TASKS. */

/* ---------------------------------------------------------------- */

/* EMAILS DISPLAY THE "SYSTEM-ID" FOR JOBS, BUT STRING */

/* "ARCH" (OR "SCHD") FOR JOBTRAC'S INTERNAL TASKS (AS */

/* 0ARCHIVE OR SCL LOAD). WITH THIS CHANGE, THE SYSTEM */

/* ID WILL BE LISTED NOW, WHERE JOBTRAC RUNS. */

/* ---------------------------------------------------------------- */.


PRE (QO91989)

SUP (T18D466).





DESC (GJTRJPRG DELETES NEWEST NOT OLDEST HISTORY ENTRIES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJPRG DELETES NEWEST NOT OLDEST HISTORY ENTRIES. */

/* ---------------------------------------------------------------- */

/* OPTION "GEN=N" FOR BATCH UTILITY GJTRJPRG SHOULD */

/* KEEP "N" GENERATIONS AND IF THERE ARE MORE, THEN */

/* THE OLDEST ONES SHOULD BE PURGED, BUT ACTUALLY THE */

/* NEWEST ONES WILL BE DELETED. ALSO, OPTION "DAYS=M" */

/* MAY NOT ALWAYS WORK CORRECTLY IN SOME RARE CASES. */

/* ---------------------------------------------------------------- */.


SUP (T18D464).





DESC (GJTRCYCL DOES NOT ADD/UPDATE CYCLIC CAL CORRECTLY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRCYCL DOES NOT ADD/UPDATE CYCLIC CAL CORRECTLY */

/* ---------------------------------------------------------------- */

/* The GJTRCYCL utility to update the cyclic calendar */

/* from a batch job does not work correctly. If one or */

/* more entries are added and no calendar entries */

/* currently exist, the records are added with an */

/* incorrect key. If an update to an existing entry is */

/* performed, the calendar entry is not updated */

/* correctly. */

/* ---------------------------------------------------------------- */.


SUP (T5EA047).





DESC (S0C7 ABEND IN GJTRCTIM DURING JTS TABLE CONVERSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 FEB 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND IN GJTRCTIM DURING JTS TABLE CONVERSION */

/* ---------------------------------------------------------------- */

/* A S0C7 abend may occur during conversion under the */

/* following conditions: */

/* */

/* 1) more than 14 entries exist in an AMR table 2) */

/* more than 34 entries exist in an SCS table */

/* ---------------------------------------------------------------- */.


PRE (QO90869,QO91989)

SUP (T5EA046).





DESC (IEFU83 S0C7 IF ADR TRIGGER WITH PROC PER NOT DAILY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 FEB 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* IEFU83 S0C7 IF ADR TRIGGER WITH PROC PER NOT DAILY */

/* ---------------------------------------------------------------- */

/* A S0C7 abend will occur in IEFU83 if a dataset */

/* (ADR) trigger occurs and the processing period */

/* specified in the ADR entry is other than DAILY. */

/* */

/* The abend occurs in GJTRHKV at offset +1C2. */

/* */

/* ***NOTE*** ***NOTE*** ***NOTE*** ***NOTE*** A */

/* Jobtrac system backout must be performed after this */

/* fix is applied in order for the changes to be made */

/* effective. ***NOTE*** ***NOTE*** ***NOTE*** */

/* ***NOTE*** */

/* ---------------------------------------------------------------- */.


PRE (QO89730)

SUP (T5EA048).





DESC (INCORRECT PREDECESSOR VERSION ASSIGNED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 MAR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* INCORRECT PREDECESSOR VERSION ASSIGNED */

/* ---------------------------------------------------------------- */

/* An incorrect predecessor version may be assigned if */

/* the predecessor event exists on the database with a */

/* different version than the event being scheduled. */

/* ---------------------------------------------------------------- */.


PRE (QO92288)

SUP (T5EA049).





DESC (CHG SUCCESSORS DOES NOT CHG "P" DEP ON SUCC EVENT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 MAR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* CHG SUCCESSORS DOES NOT CHG "P" DEP ON SUCC EVENT */

/* ---------------------------------------------------------------- */

/* If successor events are manually added to/removed */

/* from an event through the Scheduled Event Detail */

/* panel, a "P" dependency is not properly added to/ */

/* removed from the successor event(s). */

/* ---------------------------------------------------------------- */.


PRE (QO91800)

SUP (T5EA051).





DESC (ISPF INTERFACE: LOCKOUT AFTER DELETE OF JTS TABLE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF INTERFACE: LOCKOUT AFTER DELETE OF JTS TABLE. */

/* ---------------------------------------------------------------- */

/* AFTER DELETE OF A JTS TABLE THE CORRESPONDING DATA- */

/* COM REQUEST REMAINS ACTIVE, SO THAT OTHER TASKS */

/* (LIKE OTHER TSO USERS, SMUFI OR DBSQLPR IN BATCH) */

/* WILL HANG, IF TRYING TO ACCESS THE SAME JTS TABLE. */

/* DATACOM'S MODIFY COMMAND "COMM STATUS" WILL SHOW */

/* THE ACTIVE AND ALL WAITING TASKS. IF THE TSO USER */

/* LEAVES HIS JT SESSION, THE REQUEST WILL BE CLEARED. */

/* ---------------------------------------------------------------- */.


PRE (QO90009)

SUP (T18D471).





DESC (LOCKOUT POSS. IF TSO/DELETE PARALLEL TO COMPLETION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* LOCKOUT POSS. IF TSO/DELETE PARALLEL TO COMPLETION. */

/* ---------------------------------------------------------------- */

/* A LOCKOUT FOR THE TSO USER, FOR JOBTRAC AND MAYBE */

/* ALSO MUF CAN HAPPEN, IF THE DELETE OF AN EVENT (TSO */

/* INTERFACE) IS DONE AT THE SAME TIME AS JOB COMPLE- */

/* TION PROCESSING. THIS IS VERY TIMING DEPENDENT AND */

/* IT MAY REQUIRE THE RE-CYCLE OF JOBTRAC AND MUF TO */

/* CLEAR THE LOCKOUT SITUATION. */

/* ---------------------------------------------------------------- */.


SUP (T18D474).





DESC (Conversion propagates previous HOL Cal entries)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Conversion propagates previous HOL Cal entries */

/* ---------------------------------------------------------------- */

/* if the previous LOC had more entries. */

/* ---------------------------------------------------------------- */.


SUP (TF51314).





DESC (Conversion propagates previous CYCLIC Cal entries)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Conversion propagates previous CYCLIC Cal entries */

/* ---------------------------------------------------------------- */

/* if the previous LOC Cyclic had more entries. */

/* ---------------------------------------------------------------- */.


SUP (TF51315).





DESC (AUTO-SCHED: MESSAGE TRAC024C IF JOB ALREADY EXISTS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHED: MESSAGE TRAC024C IF JOB ALREADY EXISTS. */

/* ---------------------------------------------------------------- */

/* AN AUTOSCHD JOB IS CANCELED AFTER MESSAGE TRAC024C */

/* IF THIS JOB ALREADY EXISTS ON THE CHECKPOINT FILE */

/* AND IF A BLANK ACTION CODE IS USED FOR AUTO-SCHED. */

/* HOWEVER, A BLANK ACTION CODE MEANS TO ADD A NEW JOB */

/* WITH THE NEXT AVAILABLE UNUSED VERSION NUMBER. */

/* ---------------------------------------------------------------- */.


PRE (QO94653)

SUP (T18D488).





DESC (STATUS "DELETED BY USERID" NOT SHOWN ON HIST PANEL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* STATUS "DELETED BY USERID" NOT SHOWN ON HIST PANEL. */

/* ---------------------------------------------------------------- */

/* IF AN EVENT WAS DELETED (PRIOR TO EXECUTION), THEN */

/* THE HISTORY PANEL GJTRHITB DOESN'T LIST THE STATUS */

/* "DELETED BY USERID", BUT IT'S LAST ACTUAL STATUS, */

/* LIKE "LATE - AWAITING DEPENDENCIES". ALSO, IT DOES */

/* NOT DISPLAY ANY END DATE AND TIME STAMP. */

/* ---------------------------------------------------------------- */.


SUP (T18D489).





DESC (GJTRABTR: "POST" MAY BE REJECTED WITH RC=4 OR RC=8.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: "POST" MAY BE REJECTED WITH RC=4 OR RC=8. */

/* ---------------------------------------------------------------- */

/* THE POST (OR MODIFY) COMMAND MAY BE REJECTED WITH */

/* RC=4 AND MSG CUUS102I (OR RC=8 AND MSG CUUS020W IF */

/* VERSION "V(N)" WAS SPECIFIED), EVEN THOUGH THE */

/* SPECIFIED JOB CORRECTLY EXISTS ON THE CHECKPOINT. */

/* ---------------------------------------------------------------- */.


PRE (QO91582)

SUP (T18D490).





DESC (AMR FEATURE: ABEND S0C4 POSSIBLE IN GJTRVMXT/GCSLIO)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AMR FEATURE: ABEND S0C4 POSSIBLE IN GJTRVMXT/GCSLIO */

/* ---------------------------------------------------------------- */

/* ABEND S0C4 MAY HAPPEN, IF THE AMR FEATURE IS USED. */

/* A "BACK" IS REQUIRED TO ACTIVATE THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (QO89757)

SUP (T18D491).





DESC (S0C7 in Jobtrac 3.5 to r11 conversion job. Abending)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 in Jobtrac 3.5 to r11 conversion job. Abending */

/* ---------------------------------------------------------------- */

/* module identified as GJTRCONV. */

/* ---------------------------------------------------------------- */.


PRE (QO95200)

SUP (TF51319).





DESC (SED: PRIMARY COMMAND "I EVENT" TRUNCATES EVENT NAME)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SED: PRIMARY COMMAND "I EVENT" TRUNCATES EVENT NAME */

/* ---------------------------------------------------------------- */

/* THE PRIMARY COMMAND "I EVENTNAME" TRUNCATES THE */

/* FIRST FOUR CHARACTERS OF THE ENTERED EVENT NAME. */

/* ---------------------------------------------------------------- */.


PRE (QO94445)

SUP (T18D492).





DESC (THE "SCL LOAD DATE" IS ALWAYS MISSING ON SED PANEL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* THE "SCL LOAD DATE" IS ALWAYS MISSING ON SED PANEL. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO94620)

SUP (T18D493).





DESC (GJTRABTR/@JOBTRAC RETURN RC=20 FOR "END" STATEMENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR/@JOBTRAC RETURN RC=20 FOR "END" STATEMENT. */

/* ---------------------------------------------------------------- */

/* THE END STATEMENT IS NEEDED TO FREE ALL RESOURCES */

/* USED BY THE INTERFACE CALL, EITHER BATCH OR IMOD. */

/* ---------------------------------------------------------------- */.


PRE (QO89066)

SUP (T18D481).





DESC (IMOD: "MAXCC CHECK" AND MSG TRAC849I AREN'T CORRECT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* IMOD: "MAXCC CHECK" AND MSG TRAC849I AREN'T CORRECT */

/* ---------------------------------------------------------------- */

/* "MAXCC CHECK" DOESN'T CORRECTLY WORK FOR IMODS AND */

/* MESSAGE TRAC849I SHOWS INVALID IMOD NAME & VERSION. */

/* ---------------------------------------------------------------- */.


PRE (QO94653)

SUP (T18D494).





DESC (ADI FEATURE: EXPRESSION ",\=_OSD-1_" NOT PROCESSED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ADI FEATURE: EXPRESSION ",\=_OSD-1_" NOT PROCESSED. */

/* ---------------------------------------------------------------- */

/* ADI EXPRESSIONS (LIKE "\=_OSD+NN_" OR "\=_OSD-NN_") */

/* AREN'T PROCESSED CORRECTLY. ALSO, THE ERROR MESSAGE */

/* TRAC014E GIVES "RC=01" IN CASE OF AN ERROR WITH THE */

/* ADI FEATURE (BUT IT SHOULD RETURN "RC=11"). */

/* ---------------------------------------------------------------- */.


SUP (T18D495).





DESC (ADR: "ACT=PURG" IS SUBMITTING NOT PURGING AN EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* ADR: "ACT=PURG" IS SUBMITTING NOT PURGING AN EVENT. */

/* ---------------------------------------------------------------- */

/* "ACT=PURG" (ADR FEATURE) DOESN'T WORK PROPERLY: IT */

/* SUBMITS THE EVENT INSTEAD OF PURGING IT. AFTER COM- */

/* PLETION THE EVENT HANGS IN STATUS "ABENDED/EX" AND */

/* THE HDEL COMMAND IS NEEDED TO REMOVE IT. */

/* ---------------------------------------------------------------- */.


PRE (QO95098)

SUP (T18D496).





DESC (RESTARTED JOB MAY INCORRECTLY WAIT FOR SUBMIT TIME.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 MAR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* RESTARTED JOB MAY INCORRECTLY WAIT FOR SUBMIT TIME. */

/* ---------------------------------------------------------------- */

/* A TARGET ("T") THRESHOLD TIME WILL BECOME A SUBMIT */

/* TIME REQUIREMENT DURING THE RESTAGE PROCESS FOR AN */

/* ABENDED JOB, RESULTING IN "AWAITING START TIME". */

/* ---------------------------------------------------------------- */.


PRE (QO90966)

SUP (T18D497).





DESC (DIFFERENT JT CAN MARK SAME JOB IN JT11 AS COMPLETE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 MAR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* DIFFERENT JT CAN MARK SAME JOB IN JT11 AS COMPLETE. */

/* ---------------------------------------------------------------- */

/* AN AWAITING JOB IN JT11 WILL BE MARKED AS COMPLETE, */

/* IF AN IDENTICAL NAMED JOB COMPLETES IN A DIFFERENT */

/* JOBTRAC, FOR EXAMPLE IN JT35. THE JOB IN JT11 ISN'T */

/* SUBMITTED, BUT ITS SUCCESSORS WILL BE POSTED. ALSO, */

/* IT SHOWS NO SUBMIT DATE/TIME ON THE SED PANEL. A */

/* "BACK" IS REQUIRED TO ACTIVATE THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (QO88992)

SUP (T18D499).





DESC (MISSING PANEL: PRED/SUCC MISSING AFTER DEL & RE-ADD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MISSING PANEL: PRED/SUCC MISSING AFTER DEL & RE-ADD */

/* ---------------------------------------------------------------- */

/* IF MANUALLY ADDED PREDECESSORS AND/OR SUCCESSORS */

/* ARE DELETED AND THEN RE-ADDED (UNDER ISPF), THEN */

/* THE MISSING PANEL DOESN'T DISPLAY THEM ANY MORE. */

/* ---------------------------------------------------------------- */.


PRE (QO95415,QO95270)

SUP (T18D498).





DESC (GJTRABTR: GET/QUERY LIST "STAT CC" FOR COMPLETED OK)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: GET/QUERY LIST "STAT CC" FOR COMPLETED OK */

/* ---------------------------------------------------------------- */

/* FUNCTIONS GET AND QUERY OF UTILITY GJTRABTR DISPLAY */

/* STATUS "CC" ("CONDITION CODE ERROR") FOR SUCCESS- */

/* FULLY COMPLETED EVENTS. HOWEVER, IN THIS CASE "TM" */

/* ("TERMINATED SUCCESSFULLY") SHOULD BE PRINTED. */

/* ---------------------------------------------------------------- */.


PRE (QO95506)

SUP (T18D501).





DESC (ABTR: GET/QUERY PRINT "CMPC ??" FOR INTERNAL TASKS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABTR: GET/QUERY PRINT "CMPC ??" FOR INTERNAL TASKS. */

/* ---------------------------------------------------------------- */


/* A COMPLETION CODE OF "??" (HERE "CMPC ?? 0000") FOR */

/* JOBTRAC'S INTERNAL TASKS (AS 0ARCHIVE OR 0SYSARCH) */

/* IN CASE OF A SUCCESSFUL COMPLETION. */

/* ---------------------------------------------------------------- */.


PRE (QO94979)

SUP (T18D502).





DESC (ABTR: GET/QUERY PRINT "CMPC ??" FOR SCHEDULE LOADS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABTR: GET/QUERY PRINT "CMPC ??" FOR SCHEDULE LOADS. */

/* ---------------------------------------------------------------- */


/* A COMPLETION CODE OF "??" (HERE "CMPC ?? 0000") FOR */

/* SCHEDULE (SCL) LOADS, EVEN IF THEY WERE SUCCESSFUL. */

/* ---------------------------------------------------------------- */.


PRE (QO93829)

SUP (T18D503).





DESC (MULTIPLE SELECTS ON BUSGRP PANEL RESULT IN S978-04.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MULTIPLE SELECTS ON BUSGRP PANEL RESULT IN S978-04. */

/* ---------------------------------------------------------------- */

/* ISPF: IF MULTIPLE SELECT LINE COMMANDS ARE ENTERED */

/* ON THE BUSGRP PANEL, THEN ABEND S978-04 WILL OCCUR. */

/* ---------------------------------------------------------------- */.


PRE (QO95562)

SUP (T18D504).





DESC (SCL LOAD GETS RC=12 IF SAME RESOURCE DEFINED TWICE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL LOAD GETS RC=12 IF SAME RESOURCE DEFINED TWICE. */

/* ---------------------------------------------------------------- */

/* IF THE SAME RESOURCE IS DEFINED TWICE (LIKE "R=AA" */

/* OR "RS=BB,BB" ON A REFERBACK LINE), THE SCHEDULE */

/* LOAD WILL ABEND WITH RC=12 AND MESSAGE TRAC002C. */

/* ---------------------------------------------------------------- */.


PRE (QO96558)

SUP (T18D507).





DESC (SCL @EMAIL= WRONG WHEN DATE FORMAT IS INTERNATIONAL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL @EMAIL= WRONG WHEN DATE FORMAT IS INTERNATIONAL */

/* ---------------------------------------------------------------- */

/* The SCL @EMAIL global statement is not processed */

/* properly when the international date format global */

/* option is specified. */

/* ---------------------------------------------------------------- */.


PRE (QO97130)

SUP (T5EA054).





DESC (JOB START TIME IS INCORRECT IF THRESH USED ON CONT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 APR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* JOB START TIME IS INCORRECT IF THRESH USED ON CONT */

/* ---------------------------------------------------------------- */

/* If a time threshold is specified on an SCL continu- */

/* ation card, the job start time may be set to 00:00. */

/* This may cause the job to run prematurely if a */

/* target/start time was specified and all other */

/* dependencies have been met. Additionally, if a date */

/* is specified on the threshold continuation card, */

/* the date is being ignored. This fix corrects both */

/* of these problems. */

/* ---------------------------------------------------------------- */.


PRE (QO99065)

SUP (T5EA055).





DESC (Subtask GJTRENFM ended suddently.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Subtask GJTRENFM ended suddently. */

/* ---------------------------------------------------------------- */

/* GJTRENFM requests to update an event record, but it */

/* failed to get exclusive control (RC=61) of the */

/* record, GJTRENFM terminates itself instead of */

/* retrying the request. */

/* ---------------------------------------------------------------- */.


PRE (QO91172)

SUP (TB91750).





DESC (ARCHIVE LISTS WRONG EVENT TYPE FOR SCL/IMOD/ARCHIVE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE LISTS WRONG EVENT TYPE FOR SCL/IMOD/ARCHIVE */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO91255)

SUP (T18D514).





DESC (THE DUMMY SCHEDULE IS NOT HANDLED AS A DUMMY EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* THE DUMMY SCHEDULE IS NOT HANDLED AS A DUMMY EVENT. */

/* ---------------------------------------------------------------- */

/* THE EVENTS IN A DUMMY SCHEDULE SHOULD NOT BE LOAD */

/* OR RUN. */

/* ---------------------------------------------------------------- */.


PRE (QO93494)

SUP (TB91755,QO94791).





DESC (ABEND S0C4 POSSIBLE IN WTO INTERCEPT EXIT GJTRVMXT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C4 POSSIBLE IN WTO INTERCEPT EXIT GJTRVMXT. */

/* ---------------------------------------------------------------- */

/* MOD GJTRVMXT CAN BE INVOKED IN A MODE NOT ALLOWING */

/* TO ACCESS ONE OF OUR CONTROL BLOCKS; HENCE, ABEND */

/* S0C4. A "BACK" IS REQUIRED TO ACTIVATE THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (QO95520)

SUP (T18D508).





DESC (CAN'T REMOVE O-DEP FLAG IF NO EXIT TRACX26 IS USED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CAN'T REMOVE O-DEP FLAG IF NO EXIT TRACX26 IS USED. */

/* ---------------------------------------------------------------- */

/* THE REMOVING IS REJECTED WITH MESSAGE UNAUTHORIZED */

/* ("YOU ARE NOT AUTHORIZED TO UPDATE THIS EVENT."). */

/* ---------------------------------------------------------------- */.


PRE (QO94373)

SUP (T18D509).





DESC (MESSAGE TRAC006I DOESN'T INCLUDE ANY "RETURN CODE".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE TRAC006I DOESN'T INCLUDE ANY "RETURN CODE". */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO94653)

SUP (T18D510).





DESC (GJTRABTR: POST DOESN'T REMOVE SUCCESSOR, BUT P-DEP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: POST DOESN'T REMOVE SUCCESSOR, BUT P-DEP. */

/* ---------------------------------------------------------------- */

/* THE MODIFY (POST) COMMAND WITH PARM "S(-SUCCESSOR)" */

/* DOESN'T REMOVE THE SUCCESSOR ENTRY BUT THE P-DEP */

/* FLAG, SHOULD THE EVENT HAVE PREDECESSORS DEFINED. */

/* IF THERE ARE MULTIPLE PREDECESSORS ASSIGNED, THEN */

/* PARM "P(-PREDECESSOR)" WILL ALSO REMOVE THE P-DEP */

/* FLAG, EVEN IF THERE ARE STILL INCOMPLETE PRED'S. */

/* HARD CODED PRED COUNTS AREN'T ADJUSTED CORRECTLY. */

/* ---------------------------------------------------------------- */.


PRE (QO96506)

SUP (T18D505).





DESC (AUTO-SCHED IN JT11 MAY PREVENT AUTO-SCHED IN JT35.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHED IN JT11 MAY PREVENT AUTO-SCHED IN JT35. */

/* ---------------------------------------------------------------- */

/* IF ANOTHER JOBTRAC (AS JT35) IS RUNNING ON AN LPAR */

/* WITH JT11, THEN JT35'S AUTO-SCHED JOB(S) WILL BE */

/* CANCELED AFTER MESSAGES TRAC024C AND TRAC049C. A */


/* ---------------------------------------------------------------- */.


PRE (QO96103)

SUP (T18D506).





DESC (AUTO-SCHED JOBS MAY BE REJECTED WITH MSG TRAC024C.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHED JOBS MAY BE REJECTED WITH MSG TRAC024C. */

/* ---------------------------------------------------------------- */

/* IF PROGRAM NAME OR "COND=" FIELD ON THE AUTO-SCHED */

/* STEP (STEPNAME "$AUTO") AREN'T EQUAL TO JOBTRAC'S */

/* "AUTOSCHD" STEP, THEN MESSAGE TRAC024C IS ISSUED. */

/* ---------------------------------------------------------------- */.


PRE (QO95503)

SUP (T18D513).





DESC (COND ON JOBCARD -> "CC CHECK" AND S0C7 IN GJTRVWTR.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* COND ON JOBCARD -> "CC CHECK" AND S0C7 IN GJTRVWTR. */

/* ---------------------------------------------------------------- */

/* RUNNING A JOB WITH THE "COND" FIELD ON THE JOBCARD */

/* CAUSES IT TO FAIL WITH A "CC CHECK" IN JOBTRAC, IF */

/* THE JOB PREMATURELY ENDS BECAUSE OF THIS COND PARM. */

/* SYSOUT CAPTURE FOR SUCH A JOB CAUSES A S0C7 ABEND. */

/* ---------------------------------------------------------------- */.


PRE (QO90101)

SUP (T18D515).





DESC (CORRECT REPORT HEADINGS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 APR 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CORRECT REPORT HEADINGS */

/* ---------------------------------------------------------------- */

/* Change the company name in the Easytrieve report */

/* headings. */

/* ---------------------------------------------------------------- */.


PRE (QO93639,QO90870)

SUP (T5EA053).





DESC (Prevent Jobtrac from S001 abend in GJTRVWTR.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Prevent Jobtrac from S001 abend in GJTRVWTR. */

/* ---------------------------------------------------------------- */

/* When capturing the damaged sysout data set, Jobtrac */

/* ESTAE can not recover S001 abend, but also get S0C1 */

/* S0C2 or S0C4 abends. */

/* ---------------------------------------------------------------- */.


PRE (QO90654)

SUP (TB91751).





DESC (SUPPORT FOR HARDCODED SCLLIB IF NOT USING DYNAMLOC.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SUPPORT FOR HARDCODED SCLLIB IF NOT USING DYNAMLOC. */

/* ---------------------------------------------------------------- */

/* CURRENTLY, CONTROL CARD "MEM=MEMBER,NNN" (SYSIN/DD) */

/* FOR THE FORECAST JOB IS REJECTED WITH "MEMBER NOT */

/* FOUND", IF JOBTRAC DOESN'T USE "DYNAMLOC", EVEN IF */

/* THE NEEDED SCLLIB/DD IS ADDED TO THE FORECAST JOB. */

/* ---------------------------------------------------------------- */.


SUP (T18D516).





DESC (MSG $HASP003/RC=(84) POSSIBLE FOR AUTOSCHD RELEASE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MSG $HASP003/RC=(84) POSSIBLE FOR AUTOSCHD RELEASE. */

/* ---------------------------------------------------------------- */

/* RELEASING AN AUTO-SCHED JOB (JES2 CMD $AJNNN) MAY */

/* BE REJECTED WITH $HASP003/RC=(84)/BUSY-TRY LATER. */

/* OPTION $HJWAIT CAN BE USED NOW TO DELAY CMD $AJ. */

/* ---------------------------------------------------------------- */.


PRE (QO99151)

SUP (T18D523).





DESC (CANNOT REMOVE O-DEP ON EVENT EXECUTION DETAIL PANEL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CANNOT REMOVE O-DEP ON EVENT EXECUTION DETAIL PANEL */

/* ---------------------------------------------------------------- */

/* AFTER REMOVAL OF O-DEP FLAG AND RETURN TO SED PANEL */

/* THE O-DEP FLAG IS STILL THERE. ENTERING THE EVENT */

/* EXECUTION PANEL AGAIN STILL SHOWS THE O-DEP FLAG. */

/* ---------------------------------------------------------------- */.


PRE (QO99231)

SUP (T18D518).





DESC (CORRECT ARCHIVE AND PURGE REPORT HEADINGS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CORRECT ARCHIVE AND PURGE REPORT HEADINGS */

/* ---------------------------------------------------------------- */

/* Change the company name in the event archive and */

/* purge report headings. */

/* ---------------------------------------------------------------- */.


PRE (QO90653)

SUP (T5EA057).





DESC (TRAC049C changed to TRAC049I for clarity.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC049C changed to TRAC049I for clarity. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO99242)

SUP (TF51324).





DESC (AUTO-SCHD JOB NOT RELEASED, IF COND=(0,GT) IS USED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHD JOB NOT RELEASED, IF COND=(0,GT) IS USED. */

/* ---------------------------------------------------------------- */

/* IF "COND=(0,GT)" IS DEFINED ON THE AUTO-SCHED STEP */

/* (STEPNAME "$AUTO"), THEN THE AUTO-SCHED JOB ISN'T */

/* RELEASED AFTER MSG TRAC049C; IT'S WAITING FOREVER. */

/* ---------------------------------------------------------------- */.


PRE (QO99340)

SUP (T18D517).





DESC (P DEP NOT ADDED IF SUCCESSOR EVENT ALREADY EXISTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 MAY 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* P DEP NOT ADDED IF SUCCESSOR EVENT ALREADY EXISTS */

/* ---------------------------------------------------------------- */

/* If an event is added and specifies a successor */

/* event that already exists on the database a 'P' */

/* dependency is not correctly added to the successor */

/* event. This may allow the successor event to be */

/* submitted prematurely. */

/* ---------------------------------------------------------------- */.


PRE (QO95269)

SUP (T5EA056).





DESC (GET 'TRAC200C - S0C4 ABEND' WHEN RUNNING VINIT3)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GET 'TRAC200C - S0C4 ABEND' WHEN RUNNING VINIT3 */

/* ---------------------------------------------------------------- */

/* RUNNING VINIT3 WITH PARM='ONLY=XXXX', JOBTRAC GOT */

/* S0C4 ABEND WITH MESSAGE 'TRAC200C - S0C4 ABEND', */

/* BECAUSE JIAREA POINTER IN JICA IS CLEARED. IT ALSO */

/* FIX THE PROBLEM THAT THE VALUE CHANGES IN JOBTRA00 */

/* ARE NOT UPDATED INTERNALLY (AMRLCNT,SCLMAX#, */

/* JCLTABL AND $HJWAIT). */

/* ---------------------------------------------------------------- */.


PRE (QO91901)

SUP (TB91756).





DESC (AUTOSCHD: NO "VERSION INCREASE" FOR ACTION CODE 'R')

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTOSCHD: NO "VERSION INCREASE" FOR ACTION CODE 'R' */

/* ---------------------------------------------------------------- */

/* IF AN AUTO-SCHED JOB ALREADY EXISTED ON THE CHECK- */

/* POINT, A NEW RUN WAS REJECTED WITH MESSAGE TRAC024C */

/* ALTHOUGH THE NEW JOB SHOULD HAVE BEEN ADDED AFTER */

/* INCREASING THE VERSION IN CASE OF ACTION CODE "R". */

/* ---------------------------------------------------------------- */.


PRE (QO99851)

SUP (T18D526).





DESC (A78 ABEND IN GJTRSTAT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* A78 ABEND IN GJTRSTAT */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (T5U5080).





DESC (ABEND S0C4 IN GJTRSQLT DURING REVERSE CONVERSION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C4 IN GJTRSQLT DURING REVERSE CONVERSION. */

/* ---------------------------------------------------------------- */

/* IF ANY OF THE JTS TABLES DOESN'T EXIST FOR JT/R11, */

/* THEN A REVERSE CONVERSION WILL FAIL WITH ABEND S0C4 */

/* IN MOD GJTRSQLT (SEE SAMPJCL JOB "CONVERTB"). */

/* ---------------------------------------------------------------- */.


SUP (T18D530).





DESC (JTS/AMR TABLE INCOMPLETE AFTER REVERSE CONVERSION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JTS/AMR TABLE INCOMPLETE AFTER REVERSE CONVERSION. */

/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION (SEE SAMPJCL JOB CONVERTB) MAY */

/* MISS SOME JTS/AMR TABLE ENTRIES ("SYSTEM MESSAGE"). */

/* ---------------------------------------------------------------- */.


SUP (T18D535).





DESC (PURGE OR DELETE COMMAND DOES NOT RESET JOB STATUS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PURGE OR DELETE COMMAND DOES NOT RESET JOB STATUS. */

/* ---------------------------------------------------------------- */

/* JOB STATUS MUST BE CHANGED FROM RESTART TO */

/* PRODUCTION AFTER THE ABENDING JOB IS PURGED OR */

/* DELETED FROM CHECKPOINT. */

/* ---------------------------------------------------------------- */.


SUP (TB91753).





DESC (JTS/CCPF TABLE(S) MISSING AFTER REVERSE CONVERSION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JTS/CCPF TABLE(S) MISSING AFTER REVERSE CONVERSION. */

/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION (SEE SAMPJCL JOB CONVERTB) DOES */

/* NOT CREATE THE JTS/CCPF ENTRIES ("PROGRAM FILTER"). */

/* ---------------------------------------------------------------- */.


SUP (T18D533).





DESC (JTS/SCS COMMANDS MAY BE MISSING AFTER REVERSE CONV.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JTS/SCS COMMANDS MAY BE MISSING AFTER REVERSE CONV. */

/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION (SEE SAMPJCL JOB CONVERTB) ONLY */

/* TAKES THE FIRST ENTRY FROM A JTS/SCS (CMDS) TABLE. */

/* ---------------------------------------------------------------- */.


SUP (T18D534).





DESC (JTS/ADR TRIGGERS MAY BE MISSING AFTER REVERSE CONV.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JTS/ADR TRIGGERS MAY BE MISSING AFTER REVERSE CONV. */

/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION (SEE SAMPJCL JOB CONVERTB) MAY */

/* BE MISSING SOME ADR TABLE ENTRIES ("DSN TRIGGER"). */

/* ---------------------------------------------------------------- */.


SUP (T18D536).





DESC (GJTRJPRG deletes STATs even if NODELETE specified.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 MAY 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJPRG deletes STATs even if NODELETE specified. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO95152)

SUP (TF51321).





DESC (HOLIDAY 'H' DOESN'T SHOW FOR INTERNATIONAL DATE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* HOLIDAY 'H' DOESN'T SHOW FOR INTERNATIONAL DATE */

/* ---------------------------------------------------------------- */

/* When using GSO and international date format, the */

/* holiday calendar(s) are built incorrectly causing */

/* the month and day to be reversed. This results in */

/* an error building the event calendar when the "K" */

/* command is used because the "H" indicator is not */

/* shown. */

/* ---------------------------------------------------------------- */.


SUP (T5EA058).





DESC (REMOVING O-DEP FROM IMOD ELEMENT RE-ADDS THIS IMOD.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REMOVING O-DEP FROM IMOD ELEMENT RE-ADDS THIS IMOD. */

/* ---------------------------------------------------------------- */

/* IF AN IMOD FAILS BECAUSE OF A "MAX CONDITION CODE", */

/* THEN IT WILL GET AN O-DEP FLAG. REMOVNG THIS O-DEP */

/* FLAG CAUSES THE SAME IMOD ENTRY TO BE ADDED AGAIN. */

/* ---------------------------------------------------------------- */.


PRE (QO99736)

SUP (T18D520).





DESC (Events not Archived if Successors missing.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 MAY 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* Events not Archived if Successors missing. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO91152)

SUP (TF51322).


CA RS 1309 - PTF RO00033 DetailsCA Jobtrac Job Management 11.0 198

CA RS 1309 - PTF RO00033 Details

Release Service Details11.0 RO00033 RO00033 M.C.S. ENTRIES = ++APAR (RO00033)

DESC (JCLTRAC WITH "TYPRUN(JOBSCAN)" IS MISSING SOME JOBS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JCLTRAC WITH "TYPRUN(JOBSCAN)" IS MISSING SOME JOBS */

/* ---------------------------------------------------------------- */

/* OPTION "JOBSCAN" IS USED TO ANALYZE ALL INCOMPLETE */

/* JOBS FROM THE CHECKPOINT BUT SOME JOBS ARE MISSING. */

/* ---------------------------------------------------------------- */.


SUP (T18D521).





DESC (EVENT NOT RELEASING)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT NOT RELEASING */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO96549)

SUP (T241003).





DESC (L LINE CMD SHOULDN'T LIST ARCHIVED PREDS AND SUCCS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* L LINE CMD SHOULDN'T LIST ARCHIVED PREDS AND SUCCS. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO96559)

SUP (T18D522).





DESC (PREVENT JOBTRAC FROM S32E ABEND DURING STARTUP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PREVENT JOBTRAC FROM S32E ABEND DURING STARTUP. */

/* ---------------------------------------------------------------- */

/* GJTRENFM REQUESTS TO CANCEL A TIMER, BUT THE TIMER */

/* ID SPECIFIED DOES NOT EXIST. */

/* ---------------------------------------------------------------- */.


PRE (QO99104)

SUP (TB91754).





DESC (MODIFY ADJ COMMAND DOES NOT ADJUST EVENT TIMES)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 MAY 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MODIFY ADJ COMMAND DOES NOT ADJUST EVENT TIMES */

/* ---------------------------------------------------------------- */

/* The adjust (ADJ) modify task operator command does */

/* not correctly adjust target times. */

/* ---------------------------------------------------------------- */.


PRE (QO91598,QO94258,QO88082)

SUP (T5EA059).





DESC (End-time not being recognized by the interval job.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 JUN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* End-time not being recognized by the interval job. */

/* ---------------------------------------------------------------- */

/* This only occurs when the interval job has been */

/* held and run after the End-time, and End-time is */

/* greater than the Start-time in the interval range. */

/* ---------------------------------------------------------------- */.


PRE (QO96101)

SUP (TB91757).





DESC (GJTRJPRG deletes AUDITs even if NODELETE specified.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 JUN 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJPRG deletes AUDITs even if NODELETE specified. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO99993)

SUP (TF51327).





DESC (GJTRABTR: NO END DATE/TIME STAMP CREATED FOR DELETE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 JUN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: NO END DATE/TIME STAMP CREATED FOR DELETE */

/* ---------------------------------------------------------------- */

/* THE HIST PANEL WILL SHOW BLANKS AS END DATE/TIME. */

/* ---------------------------------------------------------------- */.


PRE (QO99241)

SUP (T18D519).





DESC (LOOP IN GJTRENF3 IF JOBNAME IS 1 CHARACTER LONG)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 JUN 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* LOOP IN GJTRENF3 IF JOBNAME IS 1 CHARACTER LONG */

/* ---------------------------------------------------------------- */

/* A loop will occur in GJTRENF3 at or near offset */

/* +102 if a one character jobname is specified. */

/* ---------------------------------------------------------------- */.


PRE (QO88475)

SUP (T5EA062).





DESC (CONVERTB: IPL RECORDS MISSING AFTER REV. CONVERSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 JUN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CONVERTB: IPL RECORDS MISSING AFTER REV. CONVERSION */

/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION DOESN'T CONVERT ANY IPL RECORDS. */

/* ---------------------------------------------------------------- */.


SUP (T18D540).





DESC (ABEND S0C7 IN GJTRCTIM DURING CONVERSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 JUN 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C7 IN GJTRCTIM DURING CONVERSION */

/* ---------------------------------------------------------------- */

/* Depending on the contents of the Jobtrac History */

/* file, a S/0C7 abend may occur in GJTRCTIM at offset */

/* +0005C8. */

/* ---------------------------------------------------------------- */.


PRE (QO95200)

SUP (T5EA064).





DESC (@ Line Command No Longer Works)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 JUN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* @ Line Command No Longer Works */

/* ---------------------------------------------------------------- */

/* For r11, the @ line command does not resubmit */

/* events. This correction will allow the @ line */

/* command to function as in r3.5. */

/* ---------------------------------------------------------------- */.


PRE (RO00035)

SUP (T241004).





DESC (P DEP ADDED INCORRECTLY AFTER EVENT UPDATE IN ISPF)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 JUN 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P DEP ADDED INCORRECTLY AFTER EVENT UPDATE IN ISPF */

/* ---------------------------------------------------------------- */

/* If an event is modified from the ISPF Scheduled */

/* Event Display panel and the event has been updated */

/* since the last panel refresh, the "EVENT CHANGE */

/* IGNORED" message is not properly issued. Depending */

/* on the changes made, dependencies may be added */

/* incorrectly. */

/* ---------------------------------------------------------------- */.


PRE (RO00153)

SUP (T5EA061).






/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 JUN 2008 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */


/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.



QO95063,QO95046,QO94981,QO94979,QO94801,QO94791,

QO94774,QO94653,QO94624,QO94620,QO94556,QO94445,

QO94398,QO94373,QO94369,QO94258,QO94211,QO94207,

QO94151,QO93999,QO93977,QO93831,QO93829,QO93639,

QO93496,QO93495,QO93494,QO93493,QO99231,QO99230,

QO99151,QO95222,QO95269,QO95270,QO95271,QO95415,

QO95453,QO95454,QO95503,QO95504,QO95506,QO95520,

QO95549,QO95562,QO95563,QO95669,QO95670,QO96060,

QO96074,QO96101,QO96103,QO96474,QO96506,QO96549,

QO96558,QO96559,QO97130,QO99065,QO99101,QO99104,

QO99150,QO99232,QO99241,QO99242,QO99340,QO99347,

QO99464,QO99617,QO99658,QO99728,QO99736,QO99816,

QO99833,QO99851,QO99856,QO99879,QO99886,QO99915,

QO99924,QO99925,QO99940,QO99981,QO99982,QO99983,

QO99993,QO99995,QO99996,QO99999,RO00033,RO00034,

RO00035,RO00036,RO00037,RO00105,RO00125,RO00134,

RO00135,RO00142,RO00143,RO00153,RO00174)

SUP (TF51328).





DESC (WRONG LOCATION IN MSG "NOT SCHED ... IS A HOLIDAY".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WRONG LOCATION IN MSG "NOT SCHED ... IS A HOLIDAY". */

/* ---------------------------------------------------------------- */

/* IF AN EVENT ISN'T SCHEDULED BECAUSE OF A HOLIDAY, */

/* THEN MESSAGE "* NOT SCHEDULED MM/DD IS A HOLIDAY */

/* FOR LOCATION NNN" DISPLAYS AN INCORRECT LOCATION. */

/* ---------------------------------------------------------------- */.


PRE (QO99101)

SUP (T18D511).





DESC (DEFAULT0=YES: MSG TRAC020I MAY LIST WRONG LOCATION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* DEFAULT0=YES: MSG TRAC020I MAY LIST WRONG LOCATION. */

/* ---------------------------------------------------------------- */

/* IF A JOB IS DEFINED WITH A LOCATION OTHER THAN ZERO */

/* AND IF THE CORRESPONDING JCLLIB DOESN'T INCLUDE THE */

/* JCL FOR THIS JOB AND IF OPTION "DEFAULT0=YES" IS IN */

/* USE, THEN MSG TRAC020I WILL INCLUDE THE ORIGINALLY */

/* DEFINED LOCATION INSTEAD OF LOCATION "000". */

/* ---------------------------------------------------------------- */.


PRE (QO93831)

SUP (T18D541).





DESC (EASYTRIEVE REPORTS: FILTER SELECTIONS MAY NOT WORK.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EASYTRIEVE REPORTS: FILTER SELECTIONS MAY NOT WORK. */

/* ---------------------------------------------------------------- */

/* THE CHANGE AUDIT REPORT WILL NOT LIST ANY DATA, IF */

/* FILTER SELECTIONS FOR OSD OR "CHANGE DATE/TIME" ARE */

/* SPECIFIED, ALTHOUGH CHANGE AUDIT RECORDS DO EXIST. */

/* SIMILAR PROBLEMS MAY OCCUR FOR SCHEDULE REPORTS AND */

/* FOR SCHEDULE WORKSHEET (EASYTRIEVE) REPORTS. */

/* ---------------------------------------------------------------- */.


PRE (QO99464)

SUP (T18D545).





DESC (SHOW/UPD YEAR FOR SELECT DATES ON ISPF EVENT PANELS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SHOW/UPD YEAR FOR SELECT DATES ON ISPF EVENT PANELS */

/* ---------------------------------------------------------------- */

/* If the target, start or abort date is changed for */

/* an existing event, the year remains the same even */

/* if the date change should cross a year boundary. */

/* The existing ISPF panels do not allow the year to */

/* be specified. */

/* */

/* The event detail panels have been changed to show */

/* the year for selected event dates. You will be able */

/* to see and modify the full target, start and abort */

/* dates from the Scheduled Event Detail panel. If a */

/* new target date (other than AS-AP) is specified */

/* from the Scheduled Event Display panel, a popup */

/* panel will be displayed allowing you to confirm the */

/* event dates. */

/* ---------------------------------------------------------------- */.



RO00174)

SUP (T5EA060).





DESC (CORRECT S133 ABEND DURING CONVERSION ON Z/OS 1.10)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CORRECT S133 ABEND DURING CONVERSION ON Z/OS 1.10 */

/* ---------------------------------------------------------------- */

/* Correct S/133 abend during execution of the r11 */

/* conversion program, GJTRCONV, on z/OS 1.10. The */

/* underlying abend is a S/0C4 in module GCJFCL+248. */

/* ---------------------------------------------------------------- */.


SUP (T5EA068).





DESC (P-DEP FLAG NOT ALWAYS REMOVED FOR "COMPLETED" PRED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P-DEP FLAG NOT ALWAYS REMOVED FOR "COMPLETED" PRED. */

/* ---------------------------------------------------------------- */

/* IT CAN HAPPEN, IF A NON-COMPLETED PRED IS REPLACED */

/* BY A COMPLETED PRED. IN THIS CASE, THE PRED COUNT */

/* IS ZERO, THE PRED STATUS IS COMPLETE, BUT THE P-DEP */

/* FLAG IS NOT REMOVED (FROM THE SUCCESSOR EVENT). */

/* ---------------------------------------------------------------- */.


PRE (RO00819)

SUP (T18D529).





DESC (TSO/ISPF: K=A DOESN'T DISPLAY JOBS WITH "CC CHECK".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TSO/ISPF: K=A DOESN'T DISPLAY JOBS WITH "CC CHECK". */

/* ---------------------------------------------------------------- */

/* JOBS "ABENDED" BECAUSE OF A CONDITION CODE FAILURE */

/* SHOULD BE INCLUDED IN "K=A"'S DISPLAY, WHEREAS K=C */

/* SHOULD NOT LIST THEM. */

/* ---------------------------------------------------------------- */.


PRE (RO00819)

SUP (T18D549).





DESC (ADR: DISPLAY FULLY QUALIFIED DSNAME IN MSG TRAC003I)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ADR: DISPLAY FULLY QUALIFIED DSNAME IN MSG TRAC003I */

/* ---------------------------------------------------------------- */

/* CURRENTLY, WE ONLY LIST THE GENERIC NAME WHEN DOING */

/* A DSN TRIGGER (ADR FEATURE) WITH A GENERIC DSNAME. */

/* A "BACK" IS REQUIRED TO IMPLEMENT THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (QO95222,QO96074)

SUP (T18D524).





DESC (CORRECT CONVERSION DATA ERRORS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JUL 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* CORRECT CONVERSION DATA ERRORS */

/* ---------------------------------------------------------------- */

/* This APAR corrects several problems where existing */

/* data was not correctly converted during conversion. */

/* These problems include: */

/* */

/* - ASAP date improperly converted to 0000/01/01 - */

/* ASAP time improperly converted to 00:00 - */

/* Production JCL member name missing - Temporary JCL */

/* member name missing - REXX IMOD name missing - */

/* Interval value converted improperly - Event source */

/* name missing - SCL load date missing - Temp JCL */

/* member name overlaid prod member name - Cross */

/* platform node name converted improperly - IMOD */

/* argument contains extraneous data - Successor jobs */

/* not releasing after predecessor completes; "J" */

/* dependency added to successor job(s) - Message */

/* "MEMBERNAME ERROR" - "GJTRA008 Error generating */

/* temporary JCL member name." if "J" line command */

/* used on job with "J" dependency */

/* ---------------------------------------------------------------- */.


PRE (QO95549,RO00819)

SUP (T5EA067).





DESC (DO NOT KNIT RESTAGED SCHD RECORDS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* DO NOT KNIT RESTAGED SCHD RECORDS */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (T5U5081).





DESC (Honor HARD CODED PRED COUNT for CONVERTB)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Honor HARD CODED PRED COUNT for CONVERTB */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO91583)

SUP (T5U5082).





DESC (ERROR MESSAGE "GJTRJPRA/005E" DURING HISTORY PURGE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ERROR MESSAGE "GJTRJPRA/005E" DURING HISTORY PURGE. */

/* ---------------------------------------------------------------- */

/* PURGING HISTORY RECORDS WILL DISPLAY ERROR MESSAGE */

/* "GJTRJPRA/005E" IF CCD RECORDS ARE INVOLVED. ALSO, */

/* THE INTERNATIONAL DATE ISN'T DISPLAYED CORRECTLY. */

/* ---------------------------------------------------------------- */.


SUP (T18D525).





DESC (ABENDS S80A/S878 POSSIBLE, IF MSG DB00101I WRITTEN.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABENDS S80A/S878 POSSIBLE, IF MSG DB00101I WRITTEN. */

/* ---------------------------------------------------------------- */

/* IF WRITING OF MESSAGES DB00101I AND DB00102I ISN'T */

/* SUPPRESSED IN MUF'S START-UP MEMBER DBDATIN1, THEN */

/* JT11'S REGION MAY RUN FULL, RESULTING IN S80A/S878. */

/* ---------------------------------------------------------------- */.


PRE (RO00034)

SUP (T18D550).





DESC (TRAC609W JMF SKIP LIST OPEN FAILED FOR GJMF20/GJMF30)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 JUL 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC609W JMF SKIP LIST OPEN FAILED FOR */

/* GJMF20/GJMF30 */

/* ---------------------------------------------------------------- */

/* The message TRAC609W JMF SKIP LIST OPEN FAILED is */

/* issued when programs GJMF20 and GJMF30 are */

/* executed. The open error occurs because the two */

/* programs are not authorized and the JMF data is */

/* stored in Key-0 CSA. This APAR sets the AC=1 */

/* attribute on the two programs. */

/* ---------------------------------------------------------------- */.


SUP (T5EA074).





DESC (ISPF: TOP-LINE COMMAND "IPLS" WILL RESULT IN A LOOP)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF: TOP-LINE COMMAND "IPLS" WILL RESULT IN A LOOP */

/* ---------------------------------------------------------------- */

/* THE TOP-LINE COMMAND "IPLS" (TO LIST IPL RECORDS */

/* UNDER TSO/ISPF) WILL CAUSE THE TSO-USER TO LOOP. */

/* ---------------------------------------------------------------- */.


SUP (T18D537).





DESC (WTO Over Max PREDs SUCCs EDTs and CPMs)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WTO Over Max PREDs SUCCs EDTs and CPMs */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (RO01068,RO01069,QO91583)

SUP (T5U5083).





DESC (EMAIL TEXT MISSING IF NO USER TEXT IN TEMPLATE MBR.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EMAIL TEXT MISSING IF NO USER TEXT IN TEMPLATE MBR. */

/* ---------------------------------------------------------------- */

/* THE FIRST PART OF THE EMAIL DATA IS MISSING, IF THE */

/* EMAIL TEMPLATE (MEMBER IN FILE TRACM000/DD) DOESN'T */

/* INCLUDE ANY ADDITIONAL USER DEFINED TEXT. */

/* ---------------------------------------------------------------- */.


PRE (QO95099)

SUP (T18D547).





DESC (ISPF: RESTART CMD MAY CAUSE ABEND S0C4 IN GJTRCA11.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF: RESTART CMD MAY CAUSE ABEND S0C4 IN GJTRCA11. */

/* ---------------------------------------------------------------- */

/* USING THE R(ESTART) LINE COMMAND ON THE SED PANEL */

/* MAY RESULT IN ABEND S0C4 IN MOD GJTRCA11, IF CA 11 */

/* IS USED TO RERUN AND/OR RESTART JOBS. */

/* ---------------------------------------------------------------- */.


PRE (QO88188)

SUP (T18D538).





DESC (AUTO-SCHED JOB: TYPRUN=HOLD ON JOBCARD NOT HONORED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHED JOB: TYPRUN=HOLD ON JOBCARD NOT HONORED. */

/* ---------------------------------------------------------------- */

/* USE OF "TYPRUN=HOLD" WAS NOT REGARDED, THAT IS AN */

/* AUTOSCHD JOB WAS RELEASED RIGHT AFTER SUBMISSION, */

/* EVEN THOUGH TYPRUN=HOLD WAS CODED ON THE JOBCARD. A */


/* ---------------------------------------------------------------- */.


PRE (QO99833,QO99886,QO99728,QO94653)

SUP (T18D539).





DESC (JOBTRAC STAYS UP AFTER MSG "GJTRSTAT...TERMINATING")

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOBTRAC STAYS UP AFTER MSG "GJTRSTAT...TERMINATING" */

/* ---------------------------------------------------------------- */

/* IF JOBTRAC CANNOT OPEN THE DATABASE, THEN IT ISSUES */

/* FOLLOWING ERROR MESSAGES, BUT IT STAYS UP: DB00501E */

/* - OPEN ERROR - RETURN CODE 68 (011) CXX= GJTRSTAT */

/* DATABASE ERROR - TERMINATING . */

/* ---------------------------------------------------------------- */.


PRE (RO00037,QO99915)

SUP (T18D559).





DESC (TRAC024C CANCELS AUTO-SCHD JOBS WITH SAME JOBNAME)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC024C CANCELS AUTO-SCHD JOBS WITH SAME JOBNAME */

/* ---------------------------------------------------------------- */

/* If multiple auto-schd jobs with the same jobname */

/* are submitted in rapid succession the message */

/* "TRAC024C - jobname HAS IMPROPER DEPENDENCIES, */

/* SUBMISSION DENIED." may be issued and the job may */

/* be cancelled. */

/* ---------------------------------------------------------------- */.


PRE (RO01500)

SUP (T5EA072).





DESC (ARCHIVE REPORT: SCL EVENT MAY BE FLAGGED AS "JOB".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE REPORT: SCL EVENT MAY BE FLAGGED AS "JOB". */

/* ---------------------------------------------------------------- */

/* IF AN SCL IS PURGED AFTER BEING RESTAGED, THEN IT */

/* SHOWS UP WITH EVENT TYPE JOB ON THE ARCHIVE REPORT. */

/* ---------------------------------------------------------------- */.


PRE (RO00105)

SUP (T18D531).





DESC ("CATALOG ERROR CONDITIONS" NOT PROCESSED CORRECTLY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "CATALOG ERROR CONDITIONS" NOT PROCESSED CORRECTLY. */

/* ---------------------------------------------------------------- */

/* CATALOG ERROR CHECKS (LIKE "NOT CATLGD 2" OR "NOT */

/* RECATLGD", SEE GLOBAL OPTIONS) SHOULD RESULT IN AN */

/* "O" DEPENDENCY FOR THE JOB (IF ACTIVATED). HOWEVER */

/* THEY ACTUALLY CAUSE THE JOB TO ABEND. */

/* ---------------------------------------------------------------- */.


PRE (QO99347)

SUP (T18D527).





DESC (ARCHIVE ISSUES MSG "GJTRJARA/001E" FOR IPL RECORDS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE ISSUES MSG "GJTRJARA/001E" FOR IPL RECORDS. */

/* ---------------------------------------------------------------- */

/* IF IPL RECORDS DO EXIST, THEN THE ARCHIVE TASK WILL */

/* FLAG THEM WITH ERROR MESSAGE "GJTRJARA/001E". BTW, */

/* IPL RECORDS SHOULD ONLY BE HANDLED BY THE PURGE */

/* FUNCTION, SINCE THEY BELONG TO THE "HIS_AREA". */

/* ---------------------------------------------------------------- */.


PRE (QO99999,QO99816)

SUP (T18D532).





DESC (CORRECT S/013-20 WHEN GJTRFCST SYSPRINT TO DASD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CORRECT S/013-20 WHEN GJTRFCST SYSPRINT TO DASD */

/* ---------------------------------------------------------------- */

/* A system abend 013 rc=20 will occur while executing */

/* the forecasting program GJTRFCST if the SYSPRINT */

/* output is redirected to DASD. */

/* ---------------------------------------------------------------- */.


PRE (QO99658)

SUP (T5EA063).





DESC (JES JOB NUMBER NOT SET IN EXECUTION LIST ELEMENT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JES JOB NUMBER NOT SET IN EXECUTION LIST ELEMENT */

/* ---------------------------------------------------------------- */

/* The JES job number may be missing from an Execution */

/* List element if the CHDUJV2S ENF event is received */

/* before the Execution List element is added for the */

/* job. This can result in orphaned elements in the */

/* Execution List table and may cause erroneous "X" */

/* dependencies to be added to an event. */

/* ---------------------------------------------------------------- */.


SUP (T5EA065).





DESC (AUTO EVENTS DOUBLED WITH 2 JT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO EVENTS DOUBLED WITH 2 JT */

/* ---------------------------------------------------------------- */

/* Two EVENTs created for one AUTOSCHD job when two */

/* Jobtracs are running on the same LPAR. */

/* ---------------------------------------------------------------- */.


PRE (RO01500,RO00036)

SUP (T241005).





DESC (PURGE UTIL SYNTAX ERROR DELETES ALL STAT/AUDIT RECS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PURGE UTIL SYNTAX ERROR DELETES ALL STAT/AUDIT RECS */

/* ---------------------------------------------------------------- */

/* If a syntax error occurs on one or more control */

/* cards specified to the purge utility, GJTRJPRG, the */

/* audit and statistics purge date may be incorrectly */

/* calculated. This may cause all of the audit and */

/* statistics records to be purged. Additionally, if */

/* all of the statistics records are deleted and the */

/* Jobtrac started task is active, message "GJTRSTAT */

/* DATABASE ERROR - TERMINATING" will be issued */

/* repeatedly. */

/* ---------------------------------------------------------------- */.


PRE (RO00125)

SUP (T5EA066).





DESC (STATINTV OPTION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* STATINTV OPTION */

/* ---------------------------------------------------------------- */

/* A STATINTV value that is a multiple of 60 gives an */

/* incorrect result. */

/* ---------------------------------------------------------------- */.


PRE (QO99879)

SUP (T241006).





DESC (Miscelaneous conversion issues)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Miscelaneous conversion issues */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (QO91583,QO95200,QO99925,RO00142,RO01421)

SUP (T5U5084).





DESC (Convert "MISSING" Preds and Successors)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Convert "MISSING" Preds and Successors */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (T5U5086).





DESC (JCL CONTROL STATEMENT (SYNTAX) ERROR NOT RECOGNIZED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JCL CONTROL STATEMENT (SYNTAX) ERROR NOT RECOGNIZED */

/* ---------------------------------------------------------------- */

/* A JOB WITH AN INVALID CONTROL STATEMENT (SYNTAX JCL */

/* ERROR) REMAINS IN "WAIT EXEC" STATUS AND THE JES-ID */

/* FIELD SHOWS BLANKS. IT SHOULD GET A "J-DEP" FLAG. */

/* ---------------------------------------------------------------- */.


PRE (RO01686,QO88475)

SUP (T18D544).





DESC ("LATE" EMAIL PRINTS INCORRECT SYSID AND SUBMIT D/T.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "LATE" EMAIL PRINTS INCORRECT SYSID AND SUBMIT D/T. */

/* ---------------------------------------------------------------- */

/* EMAIL SENT IN CASE OF A LATE EVENT WILL SHOW BLANK */

/* AS SYSID AND AN INVALID VALUE FOR SUBMIT DATE/TIME. */

/* KEYWORD RELEASE WAS WRITTEN IN UPPER CASE LETTERS. */

/* ---------------------------------------------------------------- */.


PRE (RO01450)

SUP (T18D555).





DESC (ARCHIVE UTILITY GJTRJARC INCLUDES FILE IPLPRINT/DD.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE UTILITY GJTRJARC INCLUDES FILE IPLPRINT/DD. */

/* ---------------------------------------------------------------- */

/* THIS FILE IS NEEDED BY THE PURGE UTILITY GJTRJPRG. */

/* IF YOU DON'T WANT TO RERUN THE INSTALLATION JOBS, */

/* THEN PLEASE MOVE FILE IPLPRINT/DD FROM JCL PROC */

/* GJTRJARC TO JCL PROC GJTRJPRG IN FILE "CAIPROC". */

/* ---------------------------------------------------------------- */.


PRE (QO99464)

SUP (T18D548).





DESC (JCLERR "RACF FAILED THE SUBMISSION" NOT RECOGNIZED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JCLERR "RACF FAILED THE SUBMISSION" NOT RECOGNIZED. */

/* ---------------------------------------------------------------- */

/* A JOB REMAINS IN "WAIT EXEC" STATUS, IF RACF FAILS */

/* IT BECAUSE THE SUBMITTING USER-ID IS REVOKED. SUCH */

/* A JOB SHOULD BE FLAGGED WITH A JCL ERROR (J-DEP). */

/* ---------------------------------------------------------------- */.


PRE (RO01726)

SUP (T18D546).





DESC (WTO message TRAC207E is not displayed in VINITx)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WTO message TRAC207E is not displayed in VINITx */

/* ---------------------------------------------------------------- */

/* when TRACPARM DD was not included in the JCL of */

/* GJTRS5IN or an invalid parm provided. */

/* ---------------------------------------------------------------- */.


PRE (QO99879,RO01690)

SUP (TB91758).





DESC (IPL RECORDS ARE NOT PROCESSED BY THE PURGE UTILITY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* IPL RECORDS ARE NOT PROCESSED BY THE PURGE UTILITY. */

/* ---------------------------------------------------------------- */

/* IPL RECORDS (ONLY) RESIDE IN THE HIS_AREA, AND THE */

/* UTILITY GJTRJPRG SHOULD PURGE THEM. A NEW OPTION */

/* "IPLDAYS=NNNN" IS CREATED SIMILAR TO AUDDAYS=NNNN, */

/* AND FILE IPLPRINT/DD NEEDS TO BE ADDED TO GJTRJPRG. */

/* ---------------------------------------------------------------- */.


PRE (RO01203,RO01688,QO99816,QO93493)

SUP (T18D543).





DESC (S0C1 POSSIBLE IN MOD GJTRCSCN IF DATABASE IS CLOSED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C1 POSSIBLE IN MOD GJTRCSCN IF DATABASE IS CLOSED */

/* ---------------------------------------------------------------- */

/* IF THE DATABASE IS CLOSED WHILE JOB COMPLETION PRO- */

/* CESSING IS DONE, THEN ABEND S0C1 MAY OCCUR IN MOD */

/* GJTRCSCN WHEN ISSUEING WTO "CANNOT OPEN DATABASE". */

/* ---------------------------------------------------------------- */.


PRE (RO01554,QO95670,RO01528)

SUP (T18D557).





DESC (CALCULATE LOWEST POSSIBLE VERSION NBR ON EVENT ADD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 AUG 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* CALCULATE LOWEST POSSIBLE VERSION NBR ON EVENT ADD */

/* ---------------------------------------------------------------- */

/* Use the lowest possible version number when adding */

/* events to the Jobtrac database. Prior to this fix, */

/* r11 would calculate the version number based on the */

/* highest version for a matching Jobname and OSD. */

/* This APAR changes the version number calculation to */

/* be the same as Jobtrac r3.5. */

/* ---------------------------------------------------------------- */.


PRE (RO01761)

SUP (T5EA070).





DESC (FORECAST JOB: LOOP OR DUPLICATE EVENTS CAN HAPPEN.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST JOB: LOOP OR DUPLICATE EVENTS CAN HAPPEN. */

/* ---------------------------------------------------------------- */

/* WHEN USING NESTED SCL'S IN THE FORECAST JOB, THEN */

/* EITHER A LOOP OR DUPLICATE EVENTS MAY OCCUR. */

/* ---------------------------------------------------------------- */.


PRE (RO01597)

SUP (T18D551).





DESC (HISTORY DETAIL PANEL: WRONG VERSION FOR P/S LISTED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* HISTORY DETAIL PANEL: WRONG VERSION FOR P/S LISTED. */

/* ---------------------------------------------------------------- */

/* THE VERSION FROM THE PRIMARY EVENT IS ERRONEOUSLY */

/* DISPLAYED AS VERSION FOR ALL PREDECESSORS AND */

/* SUCCESSORS ON THE HISTORY DETAIL PANEL GJTREVHI. */

/* ---------------------------------------------------------------- */.


PRE (RO00819)

SUP (T18D553).





DESC (ARCHIVE WITH EVENT AWAITING RERUN DROPS SUCCESSORS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 AUG 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE WITH EVENT AWAITING RERUN DROPS SUCCESSORS */

/* ---------------------------------------------------------------- */

/* If a job containing successors is restaged after an */

/* abend and an archive is performed before the re-run */

/* of the restaged event has completed, the restaged */

/* event's successor elements will be incorrectly */

/* archived and cause the successors to not be */

/* released properly. */

/* */

/* Also, the "C" and "ALLC" archive options are */

/* related to the status of successor jobs and aren't */

/* always handled correctly. */

/* ---------------------------------------------------------------- */.


PRE (RO01593)

SUP (T5EA071,T18D542).





DESC (Easytrieve Forecast Report missing Doclib/Man Act)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Easytrieve Forecast Report missing Doclib/Man Act */

/* ---------------------------------------------------------------- */

/* The Easytrieve forecast report that is contained in */

/* SAMPJCL members FORECAST and GJTREZFC does not */

/* include the text contained in the DOCLIB member for */

/* the job, like JREPORT3 did in release 3.5. In */

/* addition this PTF chanhes the way that PRED and */

/* SUCC jobs are listed to improve readability. */

/* */

/* Once the PTF is applied, the following changes to */

/* the jcl for the step that runs PGM=GJTREZCS. (The */

/* 3rd step in the FORECAST job, The only step in the */

/* GJTREZFC job). 1. Add a //JOBTRACx DD DUMMY to the */

/* step, where x is the token of your production CA */

/* Jobtrac. 2. Add a //TRACDnnn DD for each of your */

/* location DOCLIBs, specifying the DOCLIB library: */

/* //TRACD000 DD DSN=CA.JOBTRAC.TRACD000,DISP=SHR */




/* */

/* If a the //JOBTRACx DD Dummy is not specified, a */

/* new Message will be displayed on the report. */

/* JTEZ0011E - GJTREZFC; JICA NOT FOUND - MANUAL */

/* ACTIONS NOT FILTERED BY PROC PERIOD If a location */

/* DDname is not present the following message will */

/* appear on the report. ****TRACD006 DD NOT FOUND */

/* ---------------------------------------------------------------- */.


PRE (QO99464)

SUP (T4N1181).

++HOLD(T4N1181) SYSTEM REASON(ACTION) FMID(CHDB000) COMMENT(

Add the following phrase to the APPLY command to allow SMP/E to

install the sysmod:

-

BYPASS(HOLDSYS(ACTION))

-

The Easytrieve Forecast report that is contained in

SAMPJCL members FORECAST and GJTREZFC does not

include the text from the DOCLIB member for the

job, like JREPORT3 did in release 3.5. Once the

PTF is applied, the following changes should be made

to the JCL for the step that runs PGM=GJTREZCS (The 3rd

step in the FORECAST job, The only step in the GJTREZFC

job).

1. Add a //JOBTRACx DD DUMMY to the step, where x is

the token of your production CA Jobtrac.

2. Add a //TRACDnnn DD for each of your location

DOCLIBs, specifying the DOCLIB library:

//TRACD000 DD DSN=CA.JOBTRAC.TRACD000,DISP=SHR




-

If the //JOBTRACx DD Dummy is not specified, a new



Release Service Detailsmessage will be displayed on the report.

JTEZ0011E - GJTREZFC; JICA NOT FOUND - MANUAL ACTIONS

NOT FILTERED BY PROC PERIOD

If a location DDname is not present the following

message will appear on the report.

****TRACD006 DD NOT FOUND

).





DESC (COMPILE ERRORS IN REPORTS WHEN USING EASYTRIEVE R11)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* COMPILE ERRORS IN REPORTS WHEN USING EASYTRIEVE R11 */

/* ---------------------------------------------------------------- */

/* Easytrieve compiler warning and error messages are */

/* issued when executing Jobtrac Easytrieve reports */

/* under Easytrieve r11. Possible warnings include: */

/* */

/* W94: object will be truncated to size of subject */

/* field W719: LABEL name is unreferenced */

/* */

/* Possible error messages include: */

/* */

/* E27: alpha field expected */

/* */

/* These warnings/errors are not issued when using */

/* Easytrieve 6.4. */

/* ---------------------------------------------------------------- */.


PRE (QO95063,QO99464,RO00815,RO02125)

SUP (T5EA069).





DESC (S0C7 ABEND IN FORECAST REPORT IF NO MATCHING EVENTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND IN FORECAST REPORT IF NO MATCHING EVENTS */

/* ---------------------------------------------------------------- */

/* A S0C7 abend will occur in module GJTREZDO+00000162 */

/* when running the Easytrieve Forecast report */

/* GJTREZFC if no events are found. This could occur */

/* if a specific token was specified and no events */

/* exist in the forecast database for that token. */

/* ---------------------------------------------------------------- */.


PRE (RO02174)

SUP (T5EA073).





DESC (SCL LOAD FAILS IF MULTIPLE CC= DEF'S FOR SAME STEP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL LOAD FAILS IF MULTIPLE CC= DEF'S FOR SAME STEP. */

/* ---------------------------------------------------------------- */

/* SCHEDULE LOAD WILL TERMINATE WITH RC=12, IF THERE */

/* ARE MULTIPLE CONDITION CODE CHECKS DEFINED FOR THE */

/* SAME STEP, FOR EXAMPLE "CC=03,EQ,1001,03,EQ,1002". */

/* NOTE: REQUISITE FIX T5U5085 HAS TO BE APPLIED TOO. */

/* ---------------------------------------------------------------- */.


PRE (RO01883,QO99856,RO01945,RO01886)

SUP (T18D552)

REQ (RO02218).





DESC (FORECAST MAY LIST WRONG LOCATION IF "@SETLOC=" USED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST MAY LIST WRONG LOCATION IF "@SETLOC=" USED */

/* ---------------------------------------------------------------- */

/* IF MULTIPLE SCL'S ARE FORECASTED (FORECAST/SAMPJCL) */

/* AND IF @SETLOC IS USED TO DEFINE A NEW LOCATION, */

/* THEN THIS LOCATION IS USED FOR THE NEXT SCL ALSO. */

/* ---------------------------------------------------------------- */.


PRE (RO00809)

SUP (T18D556).





DESC (ENLARGE KEY "SCCK" FOR CCD ELEMENT ON STAGING AREA.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ENLARGE KEY "SCCK" FOR CCD ELEMENT ON STAGING AREA. */

/* ---------------------------------------------------------------- */

/* THIS CHANGE WILL EXTEND KEY "SCCK" ON THE DATABASE. */

/* NOTE: 1) PLEASE FOLLOW THE INSTRUCTIONS IN THE */

/* ++HOLD. 2) APPLY BOTH FIXES AND THEN RUN BOTH JOBS */

/* LISTED IN THE ++HOLD. 3) BOTH JOBS NEED TO RUN */

/* WHILE JOBTRAC IS DOWN AND DATACOM MUF IS UP. BE */

/* SURE THAT YOUR ISPF IS NOT ACCESSING THE DATABASE */

/* TO AVOID U1000 ERROR. 4) FOR SAFETY REASONS, CREATE */

/* A DATABASE BACKUP BY RUNNING (DBBKSTAT) FROM YOUR */

/* SAMPJCL LIBRARY. */

/* ---------------------------------------------------------------- */.


SUP (T5U5085)

REQ (RO02211).

++HOLD(RO02218) SYSTEM REASON(ACTION) FMID(CHDB000) COMMENT(

THE FOLLOWING 2 JOBS WILL ASSEMBLE THE TRACBTG MACRO WITH THE

DBIDS FOR THE PRIMARY AND FORECAST DATABASES.

IN THE 1ST JOB CHANGE THE PPP TO YOUR PRIMARY DATABASE DBID.

IN THE 2ND JOB CHANGE THE FFF TO YOUR FORECAST DATABASE DBID.

----------------------------------------------------

THESE 2 JOBS MUST BE EXECUTED IN ORDER TO ACTIVATE THE NEW KEY.

PLEASE CHANGE THE JCL TO REFERENCE JOBTRAC'S CAIMAC, SAMPJCL, AND

CAILIB DATASETS, AS WELL AS DATACOM'S CUSLIB, CAILIB, IXX, AND CXX

DATASETS. THESE DATASETS ARE NOTED WITH A PREFIX OF @#.

----------------------------------------------------

If you do not use 161 as your Primary DBID, you will need to add

the -RTV BASIS,HD0161 card to the SYSIN DD statement for the

DDCATC step in the first JOB. Ie.:

----------------------------------------------------

-USR DATACOM-INSTALL,NEWUSER

-CXX CATALOG,DATABASE,HD0ppp(T001)

-RTV BASIS,HD0161

----------------------------------------------------

//BTGCHNG1 JOB (00000001),'BTGCHNG PRIMARY DBID',

// CLASS=A,

// MSGCLASS=X,

// NOTIFY=YOURUSERID,

// REGION=4096K

//***********************************************************************

//***********************************************************************

//*******************************************************************

//* *

//* JCL TO GENERATE PRIMARY DATACOM DATABASE; *

//* *

//* - ASSEMBLE BTG FROM .CAIMAC(TRACBTG). *

//* - UPDATE METASTORE IN DATA DICTIONARY. *

//* - UPDATE CATALOG WITH NEW DATABASE. *

//* - ALLOCATE DATABASE SPACE AND INITIALIZE *

//* *

//* USE YOUR EDITOR'S CHANGE ALL COMMAND TO CHANGE THE FOLLOWING *

//* VALUES: *

//* *

//* '@#JOBTRAC' HIGH LEVEL QUALIFIER JOBTRAC DSN *

//* '@#DATACOM' HIGH LEVEL QUALIFIER DATACOM DSN *

//* 'PPP' DBID FOR PRIMARY DATABASE *

//* *



Release Service Details//* MAKE SURE ALL DATASET NAMES ARE CORRECT BEFORE SUBMITTING JOB *

//* IF NEEDED ADD MORE SORTWKXX FILES TO THE RETX STEP *

//* *

//*******************************************************************

//*

//* ASSEMBLE AND CREATE BTG0ppp

//*

//ASMBTGC EXEC PGM=ASMA90,REGION=4M,

// PARM='DECK,NOOBJECT,XREF(SHORT),NOTEST'

//*

//*

//SYSLIB DD DISP=SHR,

// DSN=@#JOBTRAC.JT.CAIMAC

// DD DISP=SHR,DSN=SYS1.MACLIB

//SYSPRINT DD SYSOUT=*

//SYSTERM DD SYSOUT=*

//SYSPUNCH DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0PPP)

//SYSLIN DD DUMMY,DCB=BLKSIZE=80

//SYSUT1 DD UNIT=SYSDA,SPACE=(1700,(1200,120))



//SYSIN DD *

PRINT NOGEN

TRACBTG DBN=0ppp

END

/*

//*

//* UPDATE DATADICTIONARY METASTORE

//*

//DDUPDC EXEC PGM=DDUPDATE

//STEPLIB DD DSN=@#JOBTRAC.JT.CAILIB,

// DISP=SHR

// DD DSN=@#DATACOM.AD.CUSLIB,

// DISP=SHR

// DD DSN=@#DATACOM.AD.CAILIB,

// DISP=SHR

//SNAPER DD SYSOUT=*

//DDSNAP DD SYSOUT=*


//SYSPUNCH DD SYSOUT=*

//SYSUDUMP DD SYSOUT=*

//SYSIN DD *


-DEL DATABASE,HD0ppp(,DD,PRIV)

1000 OBSOLETE

-END

// DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0PPP)

// DD *

+CPY DATABASE,HD0ppp(T001,DD,PRIV),PROD

+UPD DATABASE,HD0ppp(PROD,DD,PRIV)

/*

//*

//* CATALOG DATABASE 0ppp

//*

//DDCATC EXEC PGM=DDRTVCAT


// DISP=SHR


// DISP=SHR


// DISP=SHR




//SYSIN DD *




Release Service Details-CXX CATALOG,DATABASE,HD0ppp(T001)

/*

//*

//*******************************************************

//* REBUILD TO SUPPORT CHANGES TO THE TABLES

//*******************************************************

//RETX EXEC PGM=DBUTLTY,REGION=2M

//STEPLIB DD DSN=@#DATACOM.AD.CUSLIB,

// DISP=SHR,DCB=BLKSIZE=19069


// DISP=SHR

//IXXPPP DD DISP=SHR,DSN=@#JOBTRAC.JT.IXX0PPP

//CXX DD DSN=@#DATACOM.AD.CXX,

// DISP=SHR


//SORTWK01 DD UNIT=SYSDA,SPACE=(1700,(1200,120))



//SYSIN DD * COMMAND INPUT

ACCESS STATUS=OFF,DBID=ppp,USERS=WAIT

INIT AREA=IXX,DBID=ppp

RETIX DBID=ppp,SORT=9999999999,OPTION1='(I)'

ACCESS STATUS=WRITE,DBID=ppp

//

//BTGCHNG2 JOB (00000001),'BTGCHNG forcast DBID',

// CLASS=A,

// MSGCLASS=X,


// REGION=4096K

//*

//**************************************************

//* *

//*******************************************************************

//* *

//* JCL TO GENERATE FORECAST DATACOM DATABASE; *

//* *

//* - ASSEMBLE BTG FROM .CAIMAC(TRACBTG). *

//* - UPDATE METASTORE IN DATA DICTIONARY. *

//* - UPDATE CATALOG WITH NEW DATABASE. *

//* - ALLOCATE DATABASE SPACE AND INITIALIZE *

//* *


//* VALUES: *

//* *



//* 'FFF' DBID FOR FORECAST DATABASE *

//* *

//* MAKE SURE ALL DATASET NAMES ARE CORRECT BEFORE SUBMITTING JOB *

//* IF NEEDED ADD MORE SORTWKXX FILES TO THE RETX STEP *

//* *

//*******************************************************************

//*

//* ASSEMBLE AND CREATE BTG0fff

//*

//ASMBTGF EXEC PGM=ASMA90,REGION=4M,


//*






//SYSPUNCH DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0FFF)





Release Service Details//SYSUT2 DD UNIT=SYSDA,SPACE=(1700,(1200,120))


//SYSIN DD *

PRINT NOGEN

TRACBTG DBN=0fff

END

/*

//*


//*

//DDUPDF EXEC PGM=DDUPDATE


// DISP=SHR


// DISP=SHR


// DISP=SHR






//SYSIN DD *


-DEL DATABASE,HD0fff(,DD,PRIV)

1000 OBSOLETE

-END

// DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0FFF)

// DD *

+CPY DATABASE,HD0fff(T001,DD,PRIV),PROD

+UPD DATABASE,HD0fff(PROD,DD,PRIV)

/*

//*

//* CATALOG DATABASE 0fff

//*

//DDCATF EXEC PGM=DDRTVCAT


// DISP=SHR


// DISP=SHR


// DISP=SHR




//SYSIN DD *


-CXX CATALOG,DATABASE,HD0fff(T001)

-RTV BASIS,HD0161

/*

//*

//*******************************************************

//* REBUILD TO SUPPORT CHANGES TO THE TABLES

//*******************************************************

//RETX EXEC PGM=DBUTLTY,REGION=2M

//STEPLIB DD DSN=@#DATACOM.AD.CUSLIB,



// DISP=SHR

//IXXFFF DD DISP=SHR,DSN=@#JOBTRAC.JT.IXX0FFF

//CXX DD DSN=@#DATACOM.AD.CXX,

// DISP=SHR







Release Service Details//SYSIN DD * COMMAND INPUT

ACCESS STATUS=OFF,DBID=fff,USERS=WAIT

INIT AREA=IXX,DBID=fff

RETIX DBID=fff,SORT=9999999999,OPTION1='(I)'

ACCESS STATUS=WRITE,DBID=fff

// ) .





DESC (Interval job runs once or not across mid-night.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 SEP 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* Interval job runs once or not across mid-night. */

/* ---------------------------------------------------------------- */

/* These problems occur after RO00105 has been */

/* applied. */

/* ---------------------------------------------------------------- */.


PRE (QO96101,RO00105,RO01554,RO01821)

SUP (TB91759).





DESC (AUTOSCHD JOB NOT POSTED IF ACTION CODE "T" IS USED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTOSCHD JOB NOT POSTED IF ACTION CODE "T" IS USED. */

/* ---------------------------------------------------------------- */

/* IT ONLY HAPPENS, IF THE AUTO-SCHED JOB IS SCHEDULED */

/* WITH A "T" THRESHOLD TIME IN ADDITION TO THE J-DEP. */

/* ---------------------------------------------------------------- */.


PRE (RO01528)

SUP (T18D560).





DESC (PURGE/CANCEL OPTION OF GENERIC RESOURCE NOT WORKING)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PURGE/CANCEL OPTION OF GENERIC RESOURCE NOT WORKING */

/* ---------------------------------------------------------------- */

/* GENERIC (GROUP) RESOURCES OFFER THE PURGE OR CANCEL */

/* OPTION. IF USED, IT WILL CAUSE THE JOB TO REMAIN IN */

/* STATUS "OPERATOR PURG" (WITH FLAG '*' IN COL. 80). */

/* ---------------------------------------------------------------- */.


PRE (QO88890,RO01821)

SUP (T18D561).





DESC (CUUS088E IF SUPPLYING JT'S TOKEN VIA SUBSYS(TOKEN).)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CUUS088E IF SUPPLYING JT'S TOKEN VIA SUBSYS(TOKEN). */

/* ---------------------------------------------------------------- */

/* CURRENTLY, THE "JOBTRACX DD DUMMY" STATEMENT IS RE- */

/* QUIRED TO SUPPLY JOBTRAC'S TOKEN TO IMODS (ISERVE) */

/* AND TO GJTRABTR IN BATCH. PARAMETER "SUBSYS(TOKEN)" */

/* RESULTS IN RC=16 AND MESSAGES CUUS088E, TRAC178E */

/* AND TRACFAIL WITH "JOBTRAC? DD CARD NOT FOUND...". */

/* ALSO, ABEND S0C4 OR S0C7 MAY OCCUR IN MOD GJTRDCOM. */

/* ---------------------------------------------------------------- */.


PRE (RO02211,RO00134)

SUP (T18D554).





DESC (THE SYSTEM-ID MAY NOT BE CORRECT IF USING SYSAFF=.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* THE SYSTEM-ID MAY NOT BE CORRECT IF USING SYSAFF=. */

/* ---------------------------------------------------------------- */

/* THE SYSID (OR SMFID) MAY NOT BE THE ONE FROM THE */

/* SYSTEM, WHERE THE JOB ACTUALLY RUNS, ESPECIALLY IN */

/* CASE OF "SYSAFF=" (ON THE "/*JOBPARM" STATEMENT). */

/* ---------------------------------------------------------------- */.


PRE (RO00135)

SUP (T18D562).





DESC (Add Extended Trace)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 SEP 2008 */

/* HYPER: NO */

/* */


/* STARTRAK PROBLEM PRODUCT NAME: BRR PROBLEM NUMBER: 1057 */

/* ---------------------------------------------------------------- */

/* Add Extended Trace */

/* ---------------------------------------------------------------- */

/* add extended trace function "DEBUG" in GJTRCUUS in */

/* the checkpoint access interface module to monitor */

/* checkoint read return values */

/* */

/* after application of this PTF run the following job */

/* */

/* //STEP001 EXEC PGM=SRVMAINT //STEPLIB DD */

/* //STEPLIB DD DISP=SHR,DSN=YOUR.GSS.CAILIB */

/* //SYSPRINT DD SYSOUT=* */

/* //ISRVLOG DD SYSOUT=* */

/* //PDSISET DD DISP=SHR,DSN=YOUR.JOBTRAC.CAISRC */

/* //ISET DD DISP=SHR,DSN=YOUR.IMOD.DATASET */

/* PDSLOAD MEMBER $JBTTRK TO ISET FROM PDSISET */

/* REPLACE IMOD $JOBT_REMTTRACK */

/* //* */

/* //STEP002 EXEC PGM=SRVMAINT */

/* //STEPLIB DD DISP=SHR,DSN=YOUR.GSS.CAILIB */


/* //ISRVLOG DD SYSOUT=* */

/* //ISET DD DISP=SHR,DSN=YOUR.IMOD.DATASET */

/* //SYSIN DD * */

/* COMPILE IMOD $JOBT_REMTTRACK IN ISET STATUS PROD */

/* //* */

/* */

/* additionally add extended trace function "DEBUG" in */

/* GJTRCUUS in the checkpoint access interface module */

/* to monitor checkoint read return values */

/* ---------------------------------------------------------------- */.


SUP (T5DR037).

++HOLD (RO02366) FMID(CHDB000) SYSTEM REASON(ACTION)

COMMENT(

after application of this PTF

run the following job

//STEP001 EXEC PGM=SRVMAINT

//STEPLIB DD DISP=SHR,DSN=your.gss.CAILIB


//ISRVLOG DD SYSOUT=*

//PDSISET DD DISP=SHR,DSN=your.Jobtrac.CAISRC

//ISET DD DISP=SHR,DSN=your.IMOD.dataset

//SYSIN DD *

PDSLOAD MEMBER $JBTTRK TO ISET FROM PDSISET -

REPLACE IMOD $JOBT_REMTTRACK

//*






//SYSIN DD *

COMPILE IMOD $JOBT_REMTTRACK IN ISET STATUS PROD

//*

ADD THE FOLLOWING PHRASE TO THE APPLY AND ACCEPT COMMAND TO ALLOW



Release Service DetailsSMP/E TO INSTALL THE SYSMOD:


).





DESC (Increase performance for sequential access)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Increase performance for sequential access */

/* ---------------------------------------------------------------- */

/* to Datacom Tables: Add DBRORG member to SAMPJCL */

/* (Native Key Backup) Change URT options (GBMAXR, */

/* GETBLK, and SEQBUF) Implement NEWSITE=R option for */

/* SAMPJCL regeneration */

/* */

/* Note: Follow ++HOLD instructions. */

/* ---------------------------------------------------------------- */.


PRE (RO01738)

SUP (TF51331).



. Run DBRORG after running the Jobtrac 3.5 to r11 conversion.



. After applying this SYSMOD, perform the following steps.

.o Reassemble the URTs using SAMPJCL members ASMURTEZ, ASMURTFC,

. ASMURTFZ, and ASMURTJT.

.o Reassemble the TRACMAC Macro using NEWSITE=R to generate the

. new DBRORG member for Backup/Reload into Datacom Native Key

. sequence. You may want to use a different SAMPJCL Dataset

. as the target if you have customized your original Jobtrac

. SAMPJCL members. You would then copy DBRORG from this PDS

. into your current SAMPJCL.

).






/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 SEP 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */


/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (RO00182,RO00809,RO00811,RO00815,RO00819,RO00821,

RO00843,RO00844,RO00967,RO01067,RO01068,RO01069,

RO01203,RO01316,RO01320,RO01403,RO01421,RO01450,

RO01497,RO01500,RO01502,RO01528,RO01554,RO01592,

RO01593,RO01597,RO01641,RO01686,RO01688,RO01690,

RO01723,RO01724,RO01726,RO01737,RO01738,RO01743,

RO01744,RO01761,RO01821,RO01883,RO01886,RO01917,

RO01945,RO02125,RO02174,RO02208,RO02211,RO02212,

RO02218,RO02303,RO02309,RO02332,RO02333,RO02343,

RO02366,RO02424)

SUP (TF51334).





DESC (DELETE AND RE-ADD OF P/S MAY LIST STATUS "DELETED".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 OCT 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* DELETE AND RE-ADD OF P/S MAY LIST STATUS "DELETED". */

/* ---------------------------------------------------------------- */

/* IF X IS A PREDECESSOR FOR Y AND IF BOTH DIDN'T RUN */

/* YET WHILE THEY WERE DELETED AND RE-ADDED THEN THEY */

/* MAY SHOW UP ON THE SED PANEL WITH STATUS "DELETED". */

/* ---------------------------------------------------------------- */.


PRE (QO96474)

SUP (T18D558).





DESC (EVENT SCHEDULED WITH P DEPENDENCY DOES NOT WAIT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 NOV 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT SCHEDULED WITH P DEPENDENCY DOES NOT WAIT. */

/* ---------------------------------------------------------------- */

/* EVENT DEFINED WITH P-DEP AND WITHOUT ANY */

/* PREDECESSOR DOES NOT WAIT AFTER IT IS SCHEDULED */

/* WITH ASAP. */

/* ---------------------------------------------------------------- */.


PRE (RO02211)

SUP (TB91760).





DESC (ADD PANEL: START D/T WRONG WHEN DEFINING AS "ASAP".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 NOV 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ADD PANEL: START D/T WRONG WHEN DEFINING AS "ASAP". */

/* ---------------------------------------------------------------- */

/* IF "ASAP" SHOULD BE DEFINED FOR THE START DATE/TIME */

/* ON THE ISPF/ADD PANEL (BY SPECIFYING AN ASTERISK IN */

/* COLUMN '**' OF THE FIELD 'TARGET DATE/TIME'), THEN */

/* "00:00" IS SHOWN AS TIME AND "01/01/0000" AS DATE. */

/* ---------------------------------------------------------------- */.


PRE (RO00844)

SUP (T18D567).





DESC (AN AUTO-SCHED JOB CAN REMAIN IN "WAIT EXEC" STATUS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 NOV 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AN AUTO-SCHED JOB CAN REMAIN IN "WAIT EXEC" STATUS. */

/* ---------------------------------------------------------------- */

/* IT WILL BE THE CASE, IF THE $AUTO STEP RESIDES IN A */

/* JCL PROC. OTHER INVALID STATUSES MAY BE POSSIBLE. A */


/* ---------------------------------------------------------------- */.


PRE (RO01686)

SUP (T18D565).





DESC (P-DEP OF SUCCESSOR MAY NOT BE REMOVED BY PRED JOB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 NOV 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P-DEP OF SUCCESSOR MAY NOT BE REMOVED BY PRED JOB. */

/* ---------------------------------------------------------------- */

/* IT'S POSSIBLE, THAT THE SUCCESSFUL COMPLETION OF A */

/* PREDECESSOR JOB DOESN'T REMOVE THE P-DEP FLAG FROM */

/* A SUCCESSOR JOB, IF NO FURTHER INCOMPLETE PREDE- */

/* CESSOR JOBS DO EXIT FOR THIS SUCCESSOR JOB. */

/* ---------------------------------------------------------------- */.


SUP (T18D575).





DESC (S0C4 POSSIBLE AT SUBMIT TIME WHEN USING RESOURCES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 NOV 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 POSSIBLE AT SUBMIT TIME WHEN USING RESOURCES. */

/* ---------------------------------------------------------------- */

/* ABEND S0C4 MAY OCCUR AT SUBMISSION TIME, WHEN A JOB */

/* IS SUBMITTED WHICH HAS RESOURCE(S) ATTACHED. */

/* ---------------------------------------------------------------- */.


PRE (RO02332)

SUP (T18D571).





DESC (IMOD EXECUTION MAY RESULT IN S0C1/4 IN MOD GJTRSUB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 NOV 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* IMOD EXECUTION MAY RESULT IN S0C1/4 IN MOD GJTRSUB. */

/* ---------------------------------------------------------------- */

/* ADDING AN IMOD VIA GJTRABTR IN BATCH (OR @JOBTRAK) */

/* WILL RESULT IN ABEND S0C1 AND S0C4 IN MOD GJTRSUB. */

/* THE PSW POINTS TO LOW CORE ADDRESS X'00000002'. */

/* ---------------------------------------------------------------- */.


PRE (RO02332)

SUP (T18D570).





DESC (Pred/Succ knit with wrong version if hardcoded on)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Pred/Succ knit with wrong version if hardcoded on */

/* ---------------------------------------------------------------- */

/* first event statement. */

/* ---------------------------------------------------------------- */.


PRE (RO02212)

SUP (TF51330).





DESC (AUTO-SCHED: A JCL ERROR TURNS A Q-DEP INTO A J-DEP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTO-SCHED: A JCL ERROR TURNS A Q-DEP INTO A J-DEP. */

/* ---------------------------------------------------------------- */

/* HOWEVER, IT SHOULD REMAIN A Q-DEP, SO THAT THE RE- */

/* SUBMITTED AND CORRECTED AUTOSCHD JOB CAN RECONNECT. */

/* ---------------------------------------------------------------- */.


PRE (RO03661)

SUP (T18D579).





DESC (ADD/ADDV: INTERNAL TRACE TABLE IS MISSING THE KEY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ADD/ADDV: INTERNAL TRACE TABLE IS MISSING THE KEY. */

/* ---------------------------------------------------------------- */

/* AN INTERNAL TRACE TABLE FOR DATACOM ACCESS MISSES */

/* THE KEY FOR FUNCTIONS ADD AND ADDV. IT'S USED FOR */

/* DEBUGGING PURPOSES ONLY. */

/* ---------------------------------------------------------------- */.


PRE (RO02333)

SUP (T18D577).





DESC (CAPTURE FILE INDEX: "PERCENT IN USE" VALUE GT 100%.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CAPTURE FILE INDEX: "PERCENT IN USE" VALUE GT 100%. */

/* ---------------------------------------------------------------- */

/* THE VALUE FOR "PERCENT IN USE" OF THE INDEX PORTION */

/* OF THE CAPTURE FILE MAY BECOME GREATER THAN 100%, */

/* BEC. THE "USED" VALUE ISN'T CALCULATED CORRECTLY. */

/* ---------------------------------------------------------------- */.


PRE (RO02461)

SUP (T18D574).





DESC (S0C1 POSSIBLE IF TWO DSN TRIGGERS IN SAME MICROSEC.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C1 POSSIBLE IF TWO DSN TRIGGERS IN SAME MICROSEC. */

/* ---------------------------------------------------------------- */

/* ABEND S0C1 IN MOD GJTRLOG (AND S0C4 IN GJTRAUTO) */

/* CAN HAPPEN, IF TWO DSN TRIGGERS (TRAC003I) WILL */

/* OCCUR WITHIN THE SAME MICROSECOND. */

/* ---------------------------------------------------------------- */.


PRE (QO99924)

SUP (T18D587).





DESC ("ASAP" START D/T LISTED BY EASYTRIEVE/ARCHIVE/PURGE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "ASAP" START D/T LISTED BY EASYTRIEVE/ARCHIVE/PURGE */

/* ---------------------------------------------------------------- */

/* IF "ASAP" IS DEFINED AS START DATE/TIME, THEN THE */

/* ARCHIVE AND PURGE UTILITY AS WELL AS THE EASYTRIEVE */

/* REPORT LIST "ASAP" INSTEAD OF THE ACTUAL START D/T. */

/* ---------------------------------------------------------------- */.


PRE (RO02174,RO01761,QO99150)

SUP (T18D588).





DESC (EDEP IMOD'S NOT RE-EXECUTED AFTER JOBTRAC RE-CYCLE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EDEP IMOD'S NOT RE-EXECUTED AFTER JOBTRAC RE-CYCLE. */

/* ---------------------------------------------------------------- */

/* IF AN IMOD OF TYPE "ENVIRONMENTAL DEPENDENCY" IS IN */

/* STATUS "WAITING ON RETRY INTERVAL" WHILE JOBTRAC IS */

/* RE-CYCLED, THEN THIS EDEP/IMOD ISN'T RE-EXECUTED. A */

/* POSSIBLE PREMATURE EXHAUSTION OF THE "REXX RETRY */

/* MAXIMUM COUNT" IS CORRECTED WITH THIS CHANGE TOO. */

/* ---------------------------------------------------------------- */.


PRE (RO01821)

SUP (T18D563).





DESC (Remove Stage Delays from ADD/RUN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Remove Stage Delays from ADD/RUN */

/* ---------------------------------------------------------------- */

/* In r11 of CA Jobtrac additions to the checkpoint */

/* are made to staging tables,then a separate task */

/* promote them to the checkpoint. This introduced a */

/* stage delay when adding jobs in ISPF. This PTF */

/* DELAYS RETURNING FROM THE ADD OR RUN COMMAND */

/* until the promoting completes or until a timeout */

/* occurs. */

/* ---------------------------------------------------------------- */.


PRE (RO03445)

SUP (T4N1198).





DESC (Locations not reset for Calendar search in SCL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 DEC 2008 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Locations not reset for Calendar search in SCL */

/* ---------------------------------------------------------------- */

/* after hardcoded versions processed. */

/* ---------------------------------------------------------------- */.


PRE (RO04349)

SUP (TF51335).





DESC (@TODAY=08366 shows syntax error in SCL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 DEC 2008 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* @TODAY=08366 shows syntax error in SCL. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (RO04680)

SUP (TF51337).





DESC (THIS CHANGE CORRECTS THE FOLLOWING PROBLEMS:)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 JAN 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* THIS CHANGE CORRECTS THE FOLLOWING PROBLEMS: */

/* ---------------------------------------------------------------- */

/* 1) IF A SUCCESSOR IS ADDED ON THE SED(ETAIL) PANEL, */

/* IT ALWAYS GETS A STATUS OF "(NOT SCHD)", EVEN IF IT */

/* REALLY EXISTS ON THE CHECKPOINT. THIS DOESN'T */

/* HAPPEN FOR PREDECESSORS. 2) Prohibit P/S addition */

/* for same event in ISPF, Symptoms include: Loop at */

/* termination of Pred, Mult. DB00113I msgs in */

/* Datacom, S0C1/4 in GJTRVWTR, P-Deps not be removed */

/* from most other events, No events finish completion */

/* process (* in col 80). 3) P-dep is removed when */

/* changing other dependency of a scheduled event */

/* which has no predecessor. */

/* ---------------------------------------------------------------- */.


PRE (RO00843)

SUP (T18D578,TF51333,TB91761).





DESC (CANNOT REMOVE O-DEP FLAG IF TRACAUTH TABLE IS USED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CANNOT REMOVE O-DEP FLAG IF TRACAUTH TABLE IS USED. */

/* ---------------------------------------------------------------- */

/* REMOVAL OF O-DEP CAN'T BE DONE, IF TRACAUTH TABLE */

/* IS USED. IT MAY ALSO BE, THAT IT CAN BE REMOVED, */

/* EVEN THOUGH THE TRACAUTH TABLE DOESN'T ALLOW IT. */

/* ---------------------------------------------------------------- */.


PRE (RO00819,RO02303)

SUP (T18D584).





DESC (CCPF PROCESSING IGNORED IF COND= CODED ON JOBCARD.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CCPF PROCESSING IGNORED IF COND= CODED ON JOBCARD. */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (RO01592)

SUP (TF51329).





DESC (DSN TRIGGERS MISSING IF MULT. TRIGGERS FOR SAME DSN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* DSN TRIGGERS MISSING IF MULT. TRIGGERS FOR SAME DSN */

/* ---------------------------------------------------------------- */

/* IF THE SAME GENERIC DATA SET IS USED MULTIPLE TIMES */

/* TO TRIGGER DIFFERENT EVENTS, THEN SOME OF THESE */

/* TRIGGERED EVENTS MAY BE MISSING (JTS/ADR FUNCTION). */

/* PROBLEM MAY ALSO HAPPEN FOR THE OTHER ACTION CODES. */

/* A "BACK" IS REQUIRED TO IMPLEMENT THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (RO00967,QO95271,RO01744)

SUP (T18D582).





DESC (SYSOUT NOT CAPTURED IF MULTIPLE OUTPUT GROUPS EXIST)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SYSOUT NOT CAPTURED IF MULTIPLE OUTPUT GROUPS EXIST */

/* ---------------------------------------------------------------- */

/* SOME SYSOUTS MAY NOT BE CAPTURED, IF MULTIPLE OUT- */

/* PUT GROUPS EXIST (FOR EXAMPLE BEC. OF FREE=CLOSE). */

/* MSG TRAC098W MAY BE ISSUED FOR EVERY CAPTURED JOB. */

/* ---------------------------------------------------------------- */.


PRE (RO05084,QO99617)

SUP (T18D564).





DESC (S0C1 ABEND POSSIBLE AFTER PROCESSING OF SCS COMMAND)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C1 ABEND POSSIBLE AFTER PROCESSING OF SCS COMMAND */

/* ---------------------------------------------------------------- */

/* IF A RANGE (INTERVAL) IS USED FOR SCS COMMANDS AND */

/* IF THE "NEXT TIME" CAN'T BE UPDATED IN THE DATABASE */

/* THEN A TRACWARN MESSAGE IS ISSUED CAUSING A S0C1. */

/* ---------------------------------------------------------------- */.


PRE (RO05124)

SUP (T18D590).





DESC (WRONG SCHEDULE, IF COND OPER FIELD ON COMMENT CARD.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WRONG SCHEDULE, IF COND OPER FIELD ON COMMENT CARD. */

/* ---------------------------------------------------------------- */

/* AN EVENT MAY NOT BE SCHEDULED CORRECTLY, IF A PRE- */

/* VIOUS COMMENT CARD INCLUDES "X" AS COND. OPERATOR. */

/* THIS CHANGE ALSO CORRECTS THE PROBLEM, THAT '*+1' */

/* AS ABORT DATE MAY TURN ON A HOLIDAY HOLD (MH-DEP). */

/* ---------------------------------------------------------------- */.


PRE (RO04717)

SUP (T18D581).





DESC (ONE SYSOUT TOO MANY IS CAPTURED; HOLD OPTION NOT OK)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ONE SYSOUT TOO MANY IS CAPTURED; HOLD OPTION NOT OK */

/* ---------------------------------------------------------------- */

/* ONE MORE SYSOUT FILE THAN DEFINED FOR THE CAPTURE */

/* OPTION "CAPTURE LIMIT" IS CAPTURED. ALSO, OPTION */

/* "REQ HOLD (YNZM)" ISN'T ALWAYS CORRECTLY WORKING. */

/* ---------------------------------------------------------------- */.


PRE (RO05142,QO94624)

SUP (T18D566).





DESC (TSO: S0C1 ABEND POSSIBLE IF THE "HIS AREA" IS FULL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TSO: S0C1 ABEND POSSIBLE IF THE "HIS AREA" IS FULL. */

/* ---------------------------------------------------------------- */

/* IF THE "HIS AREA" OF THE DATABASE (FILE "HIS0161") */

/* IS FULL, THEN ANY CHANGE UNDER JOBTRAC/ONLINE (TSO) */

/* RESULTS IN A S0C1 ABEND OF THE TSO USER IF AN AUDIT */

/* RECORD NEEDS TO BE WRITTEN. WITH THIS CHANGE, NO */

/* ABEND OCCURS, BUT NEW MESSAGE TRAC180W IS ISSUED. */

/* ---------------------------------------------------------------- */.


PRE (RO04440,RO04515)

SUP (T18D592).





DESC (SYSOUT CAPTURE: DON'T WRITE INDEX BLOCK IF NO DATA.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SYSOUT CAPTURE: DON'T WRITE INDEX BLOCK IF NO DATA. */

/* ---------------------------------------------------------------- */

/* IF NO DATA IS CAPTURED (FOR EXAMPLE BECAUSE OF AN */

/* ERROR WHILE READING OUTPUT FROM JES SPOOL), THEN */

/* SKIP CREATION OF AN INDEX RECORD (ON CAPTURE FILE). */

/* ---------------------------------------------------------------- */.


PRE (RO05239)

SUP (T18D572).





DESC (SCL LOAD OK, EVEN THOUGH ERROR MSG TRAC176I ISSUED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL LOAD OK, EVEN THOUGH ERROR MSG TRAC176I ISSUED. */

/* ---------------------------------------------------------------- */

/* IF THE SAME HARDCODED VERSION NUMBER IS USED MORE */

/* THAN ONCE FOR THE SAME EVENT (WITHIN AN SCL), THEN */

/* ERROR MESSAGE TRAC176I IS ISSUED (JOBTRAC'S JOBLOG) */

/* BUT THE SCHEDULE LOAD IS NOT ABNORMALLY TERMINATED. */

/* ---------------------------------------------------------------- */.


PRE (RO05235)

SUP (T18D598).





DESC (Correct XPLAT jobs 'WAITING EXEC' at midnight)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 JAN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Correct XPLAT jobs 'WAITING EXEC' at midnight */

/* ---------------------------------------------------------------- */

/* jobs runing at or across the midnight boundary may */

/* be marked as "WAITING EXEC" at completion this */

/* corrects the time and date */

/* ---------------------------------------------------------------- */.


PRE (RO02333,QO95669)

SUP (T5DR045).





DESC (CANNOT ADD 'O-DEP', IF STATUS IS WAIT-EXEC OR EXEC.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CANNOT ADD 'O-DEP', IF STATUS IS WAIT-EXEC OR EXEC. */

/* ---------------------------------------------------------------- */

/* V3.5 ALLOWED TO ADD AN 'O' DEPENDENCY, AFTER THE */

/* JOB WAS SUBMITTED AND BEFORE IT TERMINATED. */

/* ---------------------------------------------------------------- */.


PRE (RO05032)

SUP (T18D595).





DESC (JCLTRAC: MSG JCL1072E MAY SHOW UP FOR ADI VARIABLE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JCLTRAC: MSG JCL1072E MAY SHOW UP FOR ADI VARIABLE. */

/* ---------------------------------------------------------------- */

/* IN ONLINE OR BTACH, THE JCLTRAC UTILITY MAY REJECT */

/* THE ONE OR OTHER "ADI" VARIABLE SUBSTITUTION WITH */

/* ERROR MESSAGE JCL1072E INVALID DATE CONTROL SYNTAX. */

/* ---------------------------------------------------------------- */.


PRE (QO96060)

SUP (T18D597).





DESC (JOB WORKSHEET RPT GJTREZJW NO OUTPUT IF PARM ERROR)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOB WORKSHEET RPT GJTREZJW NO OUTPUT IF PARM ERROR */

/* ---------------------------------------------------------------- */

/* If an invalid parameter is specified to the Job */

/* Worksheet report program GJTREZJW, message */

/* "JTEZ0002E - GJTREZJW; ERRORS FOUND IN PARAMETERS; */

/* CANCELLED." is issued and the program ends with */

/* return code 8. However, the parameter options */

/* report is not generated. Therefore, there is no */

/* indication as to which parameter(s) were invalid. */

/* ---------------------------------------------------------------- */.


PRE (RO02174,RO02208,RO04517)

SUP (T5EA078).





DESC (Z/OS 1.7: ABEND S0C4 POSSIBLE FOR CMD JOBQ=JOBNAME.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Z/OS 1.7: ABEND S0C4 POSSIBLE FOR CMD JOBQ=JOBNAME. */

/* ---------------------------------------------------------------- */

/* ABEND S0C4 CAN OCCUR IF MONITOR CMD "JOBQ=JOBNAME" */

/* IS ENTERED MULTIPLE TIMES (IF RUNNING Z/OS 1.7). */

/* ---------------------------------------------------------------- */.


PRE (QO94369)

SUP (T18D602).





DESC (ABTR UTILITY: VERSION=50333, "STPC" FIELD INCORRECT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABTR UTILITY: VERSION=50333, "STPC" FIELD INCORRECT */

/* ---------------------------------------------------------------- */

/* ADDING A NEW EVENT IN BATCH (UTILITY GJTRABTR) MAY */

/* SHOW A VERSION OF "50333" (OR "333" ON THE WTO). */

/* ALSO, THE "STPC" FIELD SHOWS INCORRECT VALUES, IF */

/* THE EVENT HAS A "MAXIMUM STEP CONDITION CODE". */

/* ---------------------------------------------------------------- */.


PRE (RO05321)

SUP (T18D568).





DESC (ABTR UTILITY: QUERY W/ "L(N)" MAY LIST WRONG ENTRY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABTR UTILITY: QUERY W/ "L(N)" MAY LIST WRONG ENTRY. */

/* ---------------------------------------------------------------- */

/* LISTING EVENTS FOR A SPECIFIC LOCATION (WITH QUERY */

/* COMMAND AND FOR EXAMPLE LOC(10) IN BATCH) MAY ALSO */

/* DISPLAY EVENTS FOR A LOCATION OTHER THAN "010". */

/* ---------------------------------------------------------------- */.


PRE (RO05529)

SUP (T18D569).





DESC (NOT-CAPTURED SYSOUT MAY NOT ALWAYS BE HELD, IF REQ.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NOT-CAPTURED SYSOUT MAY NOT ALWAYS BE HELD, IF REQ. */

/* ---------------------------------------------------------------- */

/* IF SYSOUT CAPTURE IS ACTIVE AND IF NOT ALL SYSOUTS */

/* SHOULD BE CAPTURED, THEN THE REMAINING SYSOUTS MAY */

/* NOT BE HELD, IF REQUESTED VIA THE CAPTURE OPTIONS. */

/* ---------------------------------------------------------------- */.


PRE (RO05282)

SUP (T18D576).





DESC (ABTR UTILITY: MODIFY OF AN IMOD -> WARNING CUUS042W)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABTR UTILITY: MODIFY OF AN IMOD -> WARNING CUUS042W */

/* ---------------------------------------------------------------- */

/* UPDATING AN IMOD (VIA REXX OR IN BATCH) RESULTS IN */

/* WARNING MESSAGE "CUUS042W READ OF EXTENSION RECORD */

/* FAILED...", BUT THE UPDATE IS DONE. */

/* ---------------------------------------------------------------- */.


PRE (RO05581)

SUP (T18D583).





DESC (ABTR UTILITY/MOD: CUUS040E W/ RC=4: RETRIES SKIPPED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABTR UTILITY/MOD: CUUS040E W/ RC=4: RETRIES SKIPPED */

/* ---------------------------------------------------------------- */

/* IF A MODIFY (UPDATE) REQUEST IS REJECTED WITH RC=4 */

/* ("CURRENTLY IN USE"), THEN THE UPDATE SHOULD BE RE- */

/* TRIED NINE MORE TIMES, BUT THIS ISN'T ALWAYS DONE. */

/* ---------------------------------------------------------------- */.


PRE (RO05711)

SUP (T18D585).





DESC (GLOBAL OPTION "HOLD ABENDING JOB" NOT WORKING.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GLOBAL OPTION "HOLD ABENDING JOB" NOT WORKING. */

/* ---------------------------------------------------------------- */

/* HOLD OF "ABENDING JOBS" DOESN'T FUNCTION PROPERLY, */

/* IF SYSOUT CAPTURE IS ACTIVE AND IF THIS JOB SHOULD */

/* NOT BE CAPTURED. */

/* ---------------------------------------------------------------- */.


PRE (RO05595,RO05142)

SUP (T18D573).





DESC (JOB SUMMARY RPT GJTREZJS GETS B101 COMPILER ERROR)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOB SUMMARY RPT GJTREZJS GETS B101 COMPILER ERROR */

/* ---------------------------------------------------------------- */

/* The uncustomized Easytrieve source member GJTREZJS */

/* residing in CAISRC is not synchronized with the */

/* customized SAMPJCL member GJTREZJS created during */

/* stage 2 processing. If the Job Summary report */

/* (GJTREZJS) is executed using GJTREZJS from CAISRC, */

/* the following Easytrieve compiler error messages */

/* may be issued: */

/* */

/* B101 IMPROPER FIELD OVERLAY B082 NAME IS UNDEFINED */

/* - EVT1-F-EVTTYPE A014 PREMATURE TERMINATION DUE TO */

/* PREVIOUS ERROR(S) */

/* ---------------------------------------------------------------- */.


PRE (QO99464)

SUP (T5EA077).





DESC (UNABLE TO SPECIFY RELATIVE DATES IN JOBTRAC REPORTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* UNABLE TO SPECIFY RELATIVE DATES IN JOBTRAC REPORTS */

/* ---------------------------------------------------------------- */

/* The Jobtrac reports allow record selection based */

/* upon dates or ranges of dates. However, the values */

/* are limited to a specific date or "TODAY" or "*" to */

/* specify the current date. */

/* */

/* This fix adds support for specifying relative dates */

/* in the format: */

/* */

/* '*+nnn' -or- 'TODAY+nnn' for today + nnn days */

/* '*-nnn' -or- 'TODAY-nnn' for today - nnn days */

/* ---------------------------------------------------------------- */.


PRE (RO05764,RO05394)

SUP (T5EA079).





DESC (TRAC088W/TRAC089I AND X-DEP PROBLEMS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 FEB 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* TRAC088W/TRAC089I AND X-DEP PROBLEMS. */

/* ---------------------------------------------------------------- */

/* 1.PREVENT JOB FROM GETTING X-DEP DUE TO THE */

/* UNRELATED JOB. 2.MAKE X-DEP TO DUPLICATE JOB IF THE */

/* JOBNAME IS IN EXCLPARM TABLE. 3.GENERATE MESSAGE - */

/* TRACDBRC FOR NON-ZERO RETURN CODE BACK FROM */

/* DATACOM. THIS MESSAGE IS FOR DIAGNOSTIC PURPOSES. */

/* THE TEXT IS AS FOLLOWS: */

/* */

/* TRACDBRC module RC=nn(db/int) fun# K=keyvalue */

/* */

/* Reason: Jobtrac received an unexpected Return code */

/* from Datacom.The message contains the following */

/* variable information: */

/* */

/* module = four byte module identifier nn = Jobtrac */

/* RC db = Datacom External RC int = Datacom Internal */

/* RC fun# = four byte jobtrac request (Jobtrac */

/* request type 3 bytes module location 1 byte) */

/* keyvalue = Key value if utililized */

/* */

/* Action: Contact Technical Support, if there is an */

/* identified problem. */

/* ---------------------------------------------------------------- */.


PRE (RO01641,RO04385)

SUP (TB91762).





DESC (START-UP: JOBS MAY BE SUBMITTED DESPITE "PARM=HOLD")

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 FEB 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* START-UP: JOBS MAY BE SUBMITTED DESPITE "PARM=HOLD" */

/* ---------------------------------------------------------------- */

/* IT IS POSSIBLE THAT A JOB IS SUBMITTED EVEN THOUGH */

/* JT IS STARTED WITH "PARM=HOLD" TO DELAY SUBMISSION. */

/* ---------------------------------------------------------------- */.


PRE (RO01502,RO05816)

SUP (T18D599).





DESC (GJTRJARC: PARMS LIST/LAW AND EXCP NOT WORKING CORR.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJARC: PARMS LIST/LAW AND EXCP NOT WORKING CORR. */

/* ---------------------------------------------------------------- */

/* PARAMETER "EXCP" INCLUDES COMPLETED EVENTS, AND */

/* PARAMETER "LIST,LAW" DOESN'T LIST ANYTHING. ALSO, */

/* GENERIC "BUSGRP" SELECTION DOESN'T WORK PROPERLY. */

/* ---------------------------------------------------------------- */.


PRE (RO02211,RO01593)

SUP (T18D607).





DESC (JOB STATUS IS NOT RESET TO PRODUCTION IN CA-11)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOB STATUS IS NOT RESET TO PRODUCTION IN CA-11 */

/* ---------------------------------------------------------------- */

/* WHEN ABENDING EVENT WAS PURGED OR DELETED THROUGH */

/* GJTRABTR. */

/* ---------------------------------------------------------------- */.


PRE (RO05729)

SUP (TB91763).





DESC (DUPLICATE JES-ID WILL RESULT IN STATUS "WAIT EXEC".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* DUPLICATE JES-ID WILL RESULT IN STATUS "WAIT EXEC". */

/* ---------------------------------------------------------------- */

/* IF A NEWLY SUBMITTED JOB GETS THE SAME JES-ID AS AN */

/* OLDER RUN OF THE SAME JOB (NOT YET ARCHIVED, OR JES */

/* JOB NO. WAS RESET: $TNUM), THEN THE NEWLY SUBMITTED */

/* EVENT WILL REMAIN IN STATUS "WAIT EXEC" FOREVER. */

/* ---------------------------------------------------------------- */.


PRE (RO01726)

SUP (T18D603).





DESC (Can't Delete MISSING events)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Can't Delete MISSING events */

/* ---------------------------------------------------------------- */

/* The MISSING panel displays missing predecessors and */

/* successors. If you try to delete a missing event, */

/* the message "jobname DELETED" is displayed. but the */

/* event does not go away. */

/* ---------------------------------------------------------------- */.


PRE (RO03202,RO00843)

SUP (T4N1199,RO03431,RO04966).





DESC (REMOVAL OF FINAL D-DEP VIA IMOD DOESN'T SUBMIT JOB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REMOVAL OF FINAL D-DEP VIA IMOD DOESN'T SUBMIT JOB. */

/* ---------------------------------------------------------------- */

/* IF A DATA SET DEPENDENCY IS THE LAST ONE AND IF IT */

/* IS REMOVED VIA REXX/IMOD, THEN THE JOB REMAINS IN */

/* STATUS "AWAITING SUBMISSION". */

/* ---------------------------------------------------------------- */.


PRE (RO06204)

SUP (T18D612).





DESC (P-DEP NOT CLEARED, AFTER LAST PREDECESSOR REMOVED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P-DEP NOT CLEARED, AFTER LAST PREDECESSOR REMOVED. */

/* ---------------------------------------------------------------- */

/* THE P-DEP FLAG OF A SUCCESSOR EVENT ISN'T CLEARED, */

/* IF THE LAST INCOMPLETE PRED ENTRY IS REMOVED (OR */

/* CHANGED TO A COMPLETED PRED) AT COLUMN "SUCCESSR" */

/* (ON THE SED PANEL) OF THE PREDECESSOR EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO06234)

SUP (T18D589).





DESC (SUPPORT FOR REQUEUE CMD $EJ,CANCEL (USED BY CA-MIM))

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SUPPORT FOR REQUEUE CMD $EJ,CANCEL (USED BY CA-MIM) */

/* ---------------------------------------------------------------- */

/* IF A JOB IS REQUEUED BACK TO JES' EXECUTION QUEUE */

/* (FOR EXAMPLE BECAUSE OF WAITING FOR DATASETS) AND */

/* RELEASED SOME TIME LATER, THEN A WRONG STATUS IS */

/* DISPLAYED ON THE SED PANEL: "ABENDED (EXECUTING)". */

/* NOTE: A NEW OPTION "REQUE$EJ=YES" CAN BE USED NOW */

/* TO SUPPORT THIS REQUEUE FEATURE (USED BY CA-MIM). A */


/* ---------------------------------------------------------------- */.


PRE (RO05124,RO05758,QO94981)

SUP (T18D593).





DESC (MULT. "CC=" ENTRIES FOR SAME STEP NOT ALW. WORKING.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MULT. "CC=" ENTRIES FOR SAME STEP NOT ALW. WORKING. */

/* ---------------------------------------------------------------- */

/* IF THERE ARE MULTIPLE CONDITION CODE CHECK ENTRIES */

/* DEFINED IN THE SCL (WITH "CC=" ON REFERBACK LINES), */

/* THEN THE ONE OR OTHER ENTRY MAY BE DISREGARDED. */

/* ---------------------------------------------------------------- */.


PRE (RO06268)

SUP (T18D596).





DESC (0SYSARCH MAY DISPLAY "ARCHIVE IN PROGRESS" FOREVER.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* 0SYSARCH MAY DISPLAY "ARCHIVE IN PROGRESS" FOREVER. */

/* ---------------------------------------------------------------- */

/* IT CAN HAPPEN THAT EVENT "0SYSARCH" WILL REMAIN IN */

/* STATUS "ARCHIVE IN PROGRESS" FOREVER. */

/* ---------------------------------------------------------------- */.


PRE (RO01316)

SUP (T18D615).





DESC (REMOTE: NJE JOBS DON'T HONOR CONDITION CODE CHECKS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REMOTE: NJE JOBS DON'T HONOR CONDITION CODE CHECKS. */

/* ---------------------------------------------------------------- */

/* IF FOR EXAMPLE MAXCC=0 IS DEFINED AND THE "NJE" JOB */

/* ENDS AT THE REMOTE SIDE WITH RC=8, THEN IT'S MARKED */

/* AS "COMPLETED SUCCESSFULLY" AT THE LOCAL SIDE. */

/* ---------------------------------------------------------------- */.


PRE (RO00811)

SUP (T18D600).





DESC (NJE SURROGATE ENTRY BUILT, IF USING LOCAL JES NODE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE SURROGATE ENTRY BUILT, IF USING LOCAL JES NODE. */

/* ---------------------------------------------------------------- */



/* "/*ROUTE XEQ JESNODE"), IF "JESNODE" IS THE LOCAL */

/* JES NODE. THIS NJE SURROGATE EVENT WILL REMAIN IN */

/* STATUS "WAIT EXEC" FOREVER. NOTE: AFTER APPLY, */

/* PLEASE RUN THE STEPS FROM SMP/E "++HOLD" SECTION. */

/* ---------------------------------------------------------------- */.


PRE (RO05841)

SUP (T18D601).

++HOLD (RO06335) FMID(CHDB000) SYSTEM REASON(ACTION) COMMENT(

After application of this PTF run the following steps:







//SYSIN DD *

PDSLOAD MEMBER $JBTNODE TO ISET FROM PDSISET -

REPLACE IMOD $JOBT_GETNODE

//*






//SYSIN DD *

COMPILE IMOD $JOBT_GETNODE IN ISET STATUS PROD

//*

Add the following phrase to the APPLY and ACCEPT commands

to allow SMP/E to install this SYSMOD:

BYPASS(HOLDSYS(ACTION)) ).





DESC (AUTOS Q Restage as J / R Autos WaiT EXEC /R CMD QJ)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTOS Q Restage as J / R Autos WaiT EXEC /R CMD QJ */

/* ---------------------------------------------------------------- */

/* This ptf addresses three issues with Auto-Schd jobs */

/* */

/* 1.When using a T type AutoSchd job a matching event */

/* must be on the Checkpoint with a J (JCL) */

/* dependency. If the job fails the event will be */

/* restaged, but will be given a Q dependency instead */

/* of a J. This will prevent the job from running when */

/* the autoschd job is resubmitted. The jobs will get */

/* TRAC024C - jobname HAS IMPROPER DEPENDENCIES, */

/* SUBMISSION DENIED message in the JOBTRAC Joblog and */

/* the job will be cancelled. */

/* */

/* 2. In certain conditions a R type Auto-Schd jobs */

/* that adds a job to the checkpoint, can have two */

/* jobs that are added with the same jobnumber. One */

/* completes, along with the job, and the other stays */

/* in Awaiting EXEC Status. */

/* */

/* 3. If a Qdep Auto-Schd jobs fails and is restaged, */

/* a R (Rerun) line command can be issued to update */

/* the CA-11 status for the job. If a CA-11 R(RESET) */

/* command is issued on the CA-11 Restart panel, the */

/* event will get a J dep added, so the job will have */

/* QJ displayed. */

/* ---------------------------------------------------------------- */.


PRE (RO01500,RO02303,RO02309,RO04627,RO05032)

SUP (T4N1204).





DESC (P-DEP ASSIGNED EVEN THOUGH COND PRED DOESN'T EXIST.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P-DEP ASSIGNED EVEN THOUGH COND PRED DOESN'T EXIST. */

/* ---------------------------------------------------------------- */

/* IF ALL CONDITIONAL PREDECESSORS FOR AN EVENT DON'T */

/* EXIST ON THE CURRENT SCHEDULE, AND IF THIS EVENT */

/* DOESN'T HAVE ANY OTHER PREDECESSORS, IT STILL GETS */

/* A "P" DEPENDENCY ASSIGNED DURING SCHEDULE LOAD. */

/* ---------------------------------------------------------------- */.


PRE (RO05283,RO03427,RO06353)

SUP (T18D604).





DESC (S0C4 IN GJTRVSCH IF USING UDEFS TOGETHER WITH FLOWS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 IN GJTRVSCH IF USING UDEFS TOGETHER WITH FLOWS */

/* ---------------------------------------------------------------- */

/* SCL LOAD MAY ABEND WITH S0C4 ABEND IN GJTRVSCH, IF */

/* USING "UDEFX" PROCESS PERIODS TOGETHER WITH FLOWS. */

/* ---------------------------------------------------------------- */.


PRE (RO06360)

SUP (T18D605).





DESC (OPTION $HJWAIT FOR AUTOSCHD JOBS DELAYS SUBMISSION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* OPTION $HJWAIT FOR AUTOSCHD JOBS DELAYS SUBMISSION. */

/* ---------------------------------------------------------------- */

/* THE OPTION "$HJWAIT" TO DELAY RELEASE OF AUTO-SCHED */

/* JOBS (WITH JES COMMAND $AJNN) WILL ALSO DELAY THE */

/* SUBMISSION OF ALL OTHER JOBS SUBMITTED BY JOBTRAC. */

/* ---------------------------------------------------------------- */.


PRE (RO06353,RO06335)

SUP (T18D606).





DESC (L LINE CMD DOESN'T DISPLAY MESSAGE "LOOP DETECTED".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* L LINE CMD DOESN'T DISPLAY MESSAGE "LOOP DETECTED". */

/* ---------------------------------------------------------------- */

/* IF THE "L" LINE COMMAND ("SCHEDULED EVENT NETWORK") */

/* DETECTS A LOOP, IT STOPS SELECTING FURTHER EVENTS, */

/* BUT IT DOESN'T DISPLAY THE MESSAGE "LOOP DETECTED". */

/* IN SOME CASES, THE SAME EVENT IS LISTED TWICE. */

/* ---------------------------------------------------------------- */.


PRE (RO06353)

SUP (T18D608).





DESC (EVENT PURGED/RESTAGED IF OUTPUT PURGED FOR MULTI-CPU)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT PURGED/RESTAGED IF OUTPUT PURGED FOR */

/* MULTI-CPU */

/* ---------------------------------------------------------------- */

/* In a multi-cpu environment, if a job's output is */

/* purged the ENF JOBPURGE event may be processed */

/* before the ENF JOBTERM event. This may cause */

/* Jobtrac to erroneously purge and optionally */

/* re-stage the event. */

/* */

/* This fix supports the new Jobtrac configuration */

/* parameter PRGDEFER=nnn (where nnn is an integer */

/* value in the range 1 to 300 with a default value of */

/* 60). The PRGDEFER= parameter defines a duration in */

/* seconds (1 - 300 seconds) that ENF JOBPURGE events */

/* will be deferred if the event has not yet */

/* completed. If the event has already completed when */

/* an ENF JOBPURGE event is received, the JOBPURGE */

/* will be ignored. */

/* ---------------------------------------------------------------- */.


PRE (QO88475,RO06209,RO06268)

SUP (T5EA080).





DESC (ENF r12 DCM Compatibility - Support Added Index)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ENF r12 DCM Compatibility - Support Added Index */

/* ---------------------------------------------------------------- */

/* This PTF will upgrade the CA-JOBTRAC DCM to be */

/* compatible with ENF r12. With CCS r11 APAR QO88354 */

/* applied, this PTF can be applied ahead of ENF r12 */

/* becoming generally available. */

/* ---------------------------------------------------------------- */.


SUP (T5DR043).

++HOLD (RO06413) SYSTEM FMID(CHDB000)

REASON(ACTION)

COMMENT(CA Common Services for z/OS r11 must be running with

PTF QO88354 applied before applying this PTF

ADD THE FOLLOWING PHRASE TO THE APPLY AND ACCEPT COMMAND TO ALLOW

SMP/E TO INSTALL THE SYSMOD:


After installation of this PTF,

hlq.SAMPLIB(HD11ENF)

must be re-run

).





DESC (SUPPORT FOR "DSC" FUNCTION OF THRUPUT MANAGER (TM).)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* SUPPORT FOR "DSC" FUNCTION OF THRUPUT MANAGER (TM). */

/* ---------------------------------------------------------------- */

/* IF "TM" REQUEUES A JOB BECAUSE OF A DATASET CONTEN- */

/* TION, THEN IT FINALLY GETS THE STATUS "ABEND/EX" */

/* AFTER RELEASE AND SUCCESSFUL JOB COMPLETION. ALSO */

/* CORRECTING PROBLEM WITH "JES REQUEUE FEATURE". */

/* ---------------------------------------------------------------- */.


PRE (RO06268)

SUP (T18D610).





DESC ("COND. OPERATOR" NOT IGNORED ON CONTINUATION LINES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "COND. OPERATOR" NOT IGNORED ON CONTINUATION LINES. */

/* ---------------------------------------------------------------- */

/* IF THE CONTINUATION LINE FOR A CONDITIONAL OPERATOR */

/* (+, / OR X IN COLUMN 69 OF THE PRECEDING LINE) IN- */

/* CLUDES AN EVENT NAME IN COL 1, IT SHOULD BE IGNORED */

/* BUT THIS IS NOT THE CASE. PLEASE NOTE, THAT CONT'D */

/* LINES FOR CONDITIONAL OPERATORS MUST CONTAIN A '+' */

/* (PLUS SIGN) IN COLUMN 1. */

/* ---------------------------------------------------------------- */.


PRE (RO06399)

SUP (T18D609).





DESC (JT11 START-UP: RECOVERY OF IMOD MAY NOT BE WORKING.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 MAR 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* JT11 START-UP: RECOVERY OF IMOD MAY NOT BE WORKING. */

/* ---------------------------------------------------------------- */

/* IF JOBTRAC IS STOPPED WHILE IMODS ARE STILL RUNNING */

/* OR BEING IN "RETRY STATUS", THEN A LOOP MAY OCCUR */

/* DURING JOBTRAC STARTUP WHEN RECOVERING THESE IMODS. */

/* ---------------------------------------------------------------- */.


PRE (RO04527,RO05164,QO99232,RO06353,RO06401,RO03625,

RO00037)

SUP (T18D613).





DESC ("L" LINE CMD MAY LIST "LOOP DETECTED", IF NO LOOP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "L" LINE CMD MAY LIST "LOOP DETECTED", IF NO LOOP. */

/* ---------------------------------------------------------------- */

/* THE "L" LINE COMMAND MAY ERRONEOUSLY DISPLAY THE */

/* MESSAGE "LOOP DETECTED" IF THERE IS INDEED NO LOOP. */

/* ---------------------------------------------------------------- */.


PRE (RO06403)

SUP (T18D611).





DESC (SCHEDULE DOES NOT LOAD DUE TO LOOP IN GJTRDCOM)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 MAR 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* SCHEDULE DOES NOT LOAD DUE TO LOOP IN GJTRDCOM */

/* ---------------------------------------------------------------- */

/* A schedule load may loop if multiple versions of an */

/* event exist and one or more versions are re-staged */

/* or interval jobs. Symptoms include: */

/* */

/* - Schedules will not load - High CPU utilization */

/* for the GJTRDSTG subtask - Database staging area */

/* continues to increase in size and is not emptied - */

/* Database staging area fills up - Jobtrac will not */

/* shutdown properly and must be canceled - Problem */

/* occurs even after Jobtrac started task is */

/* re-started - Running an archive may resolve problem */

/* ---------------------------------------------------------------- */.


PRE (RO05241)

SUP (T5EA082).





DESC (MODIFY/PRG= PURGES THE EVENT BUT ALSO ADDS AN O-DEP)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MODIFY/PRG= PURGES THE EVENT BUT ALSO ADDS AN O-DEP */

/* ---------------------------------------------------------------- */

/* MODIFY CMD "F JT,PRG=EVENT" IS PURGING THE EVENT, */

/* BUT IT ALSO ADDS AN "O-DEP" FLAG TO THE EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO00037)

SUP (T18D614).





DESC (ERRONEOUS TRAC179I MESSAGE ISSUED WITH RC=00)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 MAR 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* ERRONEOUS TRAC179I MESSAGE ISSUED WITH RC=00 */

/* ---------------------------------------------------------------- */

/* Corrects an error where message TRAC179I may be */

/* issued in error under various conditions. The */

/* complete message text is: */

/* */

/* TRAC179I DB ERROR: CMD= ,TBL= ,RET CD= , INT RC=00 */

/* ---------------------------------------------------------------- */.


PRE (RO06457)

SUP (T5EA083).





DESC (CAN'T REMOVE A-DEP (OR M-DEP) FROM COMPLETED EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 MAR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CAN'T REMOVE A-DEP (OR M-DEP) FROM COMPLETED EVENT. */

/* ---------------------------------------------------------------- */

/* CURRENTLY, IT'S NOT POSSIBLE TO REMOVE AN "A" (OR */

/* "M") DEPENDENCY FROM A COMPLETED EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO05346)

SUP (T18D616).





DESC (INTERVAL JOB IS BEING RESTAGED WITH 'P' DEPENDENCY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* INTERVAL JOB IS BEING RESTAGED WITH 'P' DEPENDENCY. */

/* ---------------------------------------------------------------- */

/* IF AN INTERVAL EVENT IS DEFINED WITH A PREDECESSOR, */

/* THEN ALL ITERATIONS WILL ALSO GET A 'P' DEPENDENCY. */

/* ---------------------------------------------------------------- */.


PRE (RO06429)

SUP (T18D617).





DESC (FORECAST RC=8 IF DATA EXISTS AND CLEAR IS NOT USED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST RC=8 IF DATA EXISTS AND CLEAR IS NOT USED */

/* ---------------------------------------------------------------- */

/* If data from a previous forecast run exists for a */

/* given token, GJTRFCST ends with an RC=08 when a */

/* subsequent forecast is performed against the same */

/* token and the CLEAR parameter is not used. Message */

/* TRACFC11E is issued and the schedule(s) are not */

/* loaded to the forecast database. Additionally, "--- */

/* Forecast DB nnnn for token x is empty" is shown in */

/* the SYSPRINT even though data actually exists for */

/* the token. */

/* ---------------------------------------------------------------- */.


PRE (RO02211)

SUP (T5EA081).





DESC (FORECAST WILL NOT LOAD SAME SCHED FOR DIFFERENT DAY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST WILL NOT LOAD SAME SCHED FOR DIFFERENT DAY */

/* ---------------------------------------------------------------- */

/* The forecast program will not load a schedule if a */

/* schedule with the same name and location already */

/* exists in the forecast database even if the start */

/* date is different. */

/* ---------------------------------------------------------------- */.


PRE (RO06638)

SUP (T5EA085).





DESC (EVENT UPDATED EVEN IF USER DOES NOT HAVE SECURITY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT UPDATED EVEN IF USER DOES NOT HAVE SECURITY */

/* ---------------------------------------------------------------- */

/* If a predecessor, successor, resource, condition */

/* code or email definition is changed for an event, */

/* the change can be made even if the user is not */

/* authorized. This is true for both internal and */

/* external security. Changes to event-related fields */

/* such as dependencies, priority, dates and times are */

/* properly secured. */

/* ---------------------------------------------------------------- */.


PRE (QO95563,RO00819,RO06262)

SUP (T5EA084).





DESC (ADR ENTRY W/ "ACTION=PURG" MAY NOT PURGE THE EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ADR ENTRY W/ "ACTION=PURG" MAY NOT PURGE THE EVENT. */

/* ---------------------------------------------------------------- */

/* IT WILL ONLY HAPPEN, IF THIS "PURGE" FUNCTION WAS */

/* ALREADY DONE ONCE, AND IF THIS PURGED EVENT STILL */

/* EXISTS ON THE CURRENT SCHEDULE (IN PURGED STATUS). */

/* ---------------------------------------------------------------- */.


PRE (RO06429)

SUP (T18D618).





DESC (GJTRENFM SUBTASK ENDS PROCESSING QUEUED JOBPURGE EVT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 APR 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* GJTRENFM SUBTASK ENDS PROCESSING QUEUED JOBPURGE */

/* EVT */

/* ---------------------------------------------------------------- */

/* If the Jobtrac ENF listener subtask is notified of */

/* a new ENF event while processing a queued JOBPURGE */

/* ENF event, the subtask will end prematurely. This */

/* will cause a U0203 abend and termination of the */

/* Jobtrac started task. */

/* ---------------------------------------------------------------- */.


PRE (RO06411)

SUP (T5EA086).





DESC (IMOD to support Web Services)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* IMOD to support Web Services */

/* ---------------------------------------------------------------- */

/* A new IMOD $JOBT_SOALIST is added with this PTF to */

/* support the Web Services for Workload Automation */

/* component in CA Jobtrac. This IMOD is used */

/* internally by CA Jobtrac to support requests that */

/* come in from web services. **** Read the ++HOLD for */

/* post install steps **** */

/* ---------------------------------------------------------------- */.


SUP (T4N1200).


-

INSTALLATION TASKS:

-

1. APPLY PTF RO06718 WITH THE PHRASE BYPASS(HOLDSYS(ACTION)).

-

POST-INSTALLATION IMPLEMENTATION TASKS:

-

1. RUN THE FOLLOWING JOB TO LOAD AND COMPILE THE IMOD:

-

+-----------------------------------------------------------------+

| |

| //JOBNAME JOB .... |

| //STEPNAME EXEC PGM=SRVMAINT |

| //STEPLIB DD DISP=SHR,DSN=CA-GSS LOAD LIBRARY |

| //SYSPRINT DD SYSOUT=* |

| //JBTSOA DD DISP=SHR,DSN=CAI.CAISRC($JBTSOA) *JT CAISRC |

| //ISET DD DISP=SHR,DSN=CA-JOBTRACS IMOD DATASET |

| //SYSIN DD * |

| * COPY IMODS |

| COPY IMOD $JOBT_SOALIST TO ISET FROM JBTSOA REPLACE |

| * COMPILE IMODS |

| COMPILE IMOD $JOBT_SOALIST IN ISET STATUS PROD |

| /* |

| |

+-----------------------------------------------------------------+

).





DESC (CANNOT REMOVE "?" DEPENDENCY FROM COMPLETED EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CANNOT REMOVE "?" DEPENDENCY FROM COMPLETED EVENT. */

/* ---------------------------------------------------------------- */

/* CURRENTLY, IT'S NOT POSSIBLE TO REMOVE A "?-DEP" */

/* ("VIEW DOCUMENTATION") FROM A COMPLETED EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO06511)

SUP (T18D620).





DESC (GJTRABTR: ADD DOESN'T HONOR HARD-CODED P/S VERSION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: ADD DOESN'T HONOR HARD-CODED P/S VERSION. */

/* ---------------------------------------------------------------- */

/* IF AN EVENT IS ADDED VIA GJTRABTR (EITHER IN BATCH */

/* OR WITH REXX/IMOD) WITH A PREDECESSOR OR SUCCESSOR */

/* HAVING A SPECIFIC VERSION NUMBER GREATER THAN "1", */

/* THEN THIS HARD-CODED VERSION NUMBER ISN'T ASSIGNED. */

/* ---------------------------------------------------------------- */.


PRE (RO06240)

SUP (T18D621).





DESC (JOBTRAC GOT MESSAGE TRAC179I DB ERROR: RET CD=11,)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOBTRAC GOT MESSAGE TRAC179I DB ERROR: RET CD=11, */

/* ---------------------------------------------------------------- */

/* INT RC=2C, WHEN A RESOURCE NAME IS SCHEDULED FOR A */

/* WAITING JOB. THE PROBLEM CAN ONLY OCCUR WHEN */

/* UPDATING EVENT RECORD IN GJTRRSRC AND UPDATE COUNT */

/* DOES MATCH. */

/* ---------------------------------------------------------------- */.


PRE (RO03625,RO06429)

SUP (TB91764).





DESC (TYPRUN=SCAN LEAVES JOB IN WAIT EXEC STATUS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TYPRUN=SCAN LEAVES JOB IN WAIT EXEC STATUS */

/* ---------------------------------------------------------------- */

/* If the TYPRUN=SCAN parameter is specified on the */

/* JOB statement and there are no JCL errors the event */

/* will remain in WAIT EXEC status until purged. */

/* */

/* NOTE: Usermod UM00001 must be used in conjunction */

/* with this APAR to properly handle jobs with */

/* TYPRUN=SCAN. Additionally, this APAR changes the */

/* @HDJES macro that is used in UM00001. Therefore, */

/* either a REWORK or RESTORE/RECEIVE/APPLY must be */

/* performed on UM00001 after application of this */

/* APAR. A Jobtrac system BACKOUT (F stcname,BACK) is */

/* required to implement this APAR. */

/* ---------------------------------------------------------------- */.


PRE (RO03446,RO06411,RO06429)

SUP (T4N1211).





DESC (MISSING command is slow to respond)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 APR 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MISSING command is slow to respond */

/* ---------------------------------------------------------------- */

/* The MISSING command can be very slow to respond if */

/* your CA JOBTRAC database contains a large amount of */

/* history data. */

/* In addition to applying this fix, the following job */

/* can be run against your CA Jobtrac database to */

/* correct existing history data. */

/* */

/* ********** Start of JCL ********************* */

/* // JOB .... */

/* //******************************************** */

/* //* This Job will changes status flags for * */

/* //* archived Pred/Succ records. Datacom must * */

/* //* be ACTIVE we this job is run. This job * */

/* //* can be run while CA Jobtrac is ACTIVE. * */

/* //* Since this job modifies your database, * */

/* //* you should backup you CA Jobtrac Database* */

/* //* before running this Job. Watch the LXX * */

/* //* file while this job runs and run a spill * */

/* //* job if needed. * */

/* //******************************************** */

/* //SQLEXEC EXEC PGM=DBSQLPR, */

/* // PARM='prtWidth=999,inputWidth=72,optfile=op' */

/* //STEPLIB DD DSN=your.datacom.CUSLIB, <-Specify */

/* // DISP=SHR */

/* // DD DSN=your.datacom.CAILIB, <-Specify */

/* // DISP=SHR */

/* //SYSUDUMP DD SYSOUT=* */


/* //STDERR DD SYSOUT=* */

/* //STDOUT DD SYSOUT=* */

/* //OP DD * */

/* AUTHID=SYSUSR */

/* //******************************************** */

/* //* If you are using a DBID other than 0161 * */

/* //* you will need to change 0161 in the * */

/* //* statements below to your 4 digit DBID * */

/* //******************************************** */

/* //SYSIN DD * */

/* UPDATE SYSUSR.CAHD_0161_PST SET PRDSTAT='M' */

/* WHERE PRDHST='Y' AND PRDSTAT='?'; */

/* UPDATE SYSUSR.CAHD_0161_PST SET SUCSTAT='M' */

/* WHERE SUCHST='Y' AND SUCSTAT='?'; */

/* /* */

/* ********** End of JCL ********************* */

/* ---------------------------------------------------------------- */.


PRE (RO05394,QO95046,RO06234)

SUP (T4N1212).





DESC (INCREASE RANGE OF PRGDEFER STARTUP PARAMETER)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* INCREASE RANGE OF PRGDEFER STARTUP PARAMETER */

/* ---------------------------------------------------------------- */

/* Increase the range of the PRGDEFER startup */

/* parameter from 1 - 300 seconds to 1 - 1800 seconds. */

/* The default value will still remain at 60 seconds. */

/* ---------------------------------------------------------------- */.


PRE (RO06411)

SUP (T5EA087).





DESC (Restore Step Footers Feature)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Restore Step Footers Feature */

/* ---------------------------------------------------------------- */

/* In r3.5 there was a feature that printed the usage */

/* information following each step that executes. This */

/* was produced by Jobtrac's IEFACTRT SMF exit. In r11 */

/* this exit was eliminated. CA Jobtrac now uses */

/* CAIENF to capture and provide tracking information */

/* to CA Jobtrac. Since the exit was no longer used, */

/* the Step Footers feature was no longer available. */

/* This change reinstates the IEFACTRT exit without */

/* the tracking functions, so the Step Footers can be */

/* provided. This feature, including the SYS OPTS */

/* option to turn it on and off, works exactly like */

/* r3.5. */

/* */

/* See the ++HOLD for steps that need to be taken */

/* before applying this PTF. */

/* ---------------------------------------------------------------- */.


PRE (RO07056,RO05841,RO06317,RO06411,RO07151)

SUP (T4N1214).


-

Before Applying this ptf you must add the following DD statement to

your CA Jobtrac SMP/e Proc, CAIHD11.

-

//*********************************************************************

//* DEFINE LINKLIB'S FOR EXTERNAL INTERFACE MODULES *

//*********************************************************************

//*

//AOSB3 DD DSN=SYS1.AOSB3,DISP=SHR <== IEFTB724 - CHDB000

//*

-

This defines the AOSB3 library that contains the IEFTB724 module that is

used to write messages to the Jobs SYSMSG (JESYSMSG) log. Make sure

that this library exists and contains the IEFTB724 module before

applying this PTF.

).





DESC (Both Holiday and Cyclic Calendars must be defined)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Both Holiday and Cyclic Calendars must be defined */

/* ---------------------------------------------------------------- */

/* for each Location. Allow each Location to have one */

/* or both defined. */

/* ---------------------------------------------------------------- */.


PRE (RO06427)

SUP (TF51338).





DESC (Versions Not Connecting P/S Correctly / TRACX13 Parms)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Versions Not Connecting P/S Correctly / TRACX13 */

/* Parms */

/* ---------------------------------------------------------------- */

/* The predecessor and successor version numbers were */

/* not being properly assigned as decribed in the CA */

/* Jobtrac Documentation. This was most evident when */

/* jobs with the same names were already on the */

/* checkpoint, when hardcoded versions were used with */

/* dynamically assigned versions and when duplicate */

/* JOB NAMES WERE DEFINED IN THE SAME SCL. */

/* */

/* Also included is a fix for TRACX13 exit not */

/* RECEIVING THE CORRECT INPUT PARAMETERS. */

/* ---------------------------------------------------------------- */.


PRE (RO07214)

SUP (T4N1213).





DESC (S0C4 in GJTRVSCH when using CPM or Forecast.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 MAY 2009 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 in GJTRVSCH when using CPM or Forecast. */

/* ---------------------------------------------------------------- */

/* @SETLOC= not propagated correctly. */

/* ---------------------------------------------------------------- */.


PRE (RO07230)

SUP (TF51344).





DESC (Historical Start Times incorrect in r11 Conversion.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Historical Start Times incorrect in r11 Conversion. */

/* ---------------------------------------------------------------- */

/* This results in incorrect/invalid Average Start */

/* times when using '*' Target Times. */

/* ---------------------------------------------------------------- */.


SUP (TF51340).





DESC (MULTIPLE JTS CALLS MAY HANG THE ISPF/ONLINE SESSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MULTIPLE JTS CALLS MAY HANG THE ISPF/ONLINE SESSION */

/* ---------------------------------------------------------------- */

/* 1) MULTIPLE INVOCATIONS OF THE TABLE SERVICES "JTS" */

/* MAY CAUSE THE TSO/ISPF ONLINE SESSION TO HANG. */

/* 2) RESTART OF COMPLETED EVENT WILL DROP ATTACHED */

/* ARGUMENTS (NEEDED FOR EXAMPLE FOR "XPS" EVENTS). */

/* 3) "BUSINESS GROUP STATUS" PANEL (CMD "BUSGRP") */

/* Always shows "0" (ZERO) FOR ABENDED EVENTS. */

/* ---------------------------------------------------------------- */.


PRE (RO07180,RO06469,RO06442,RO05239,RO05124,QO93999,

QO90009)

SUP (T18D619).





DESC (TRACMAC and STAGE1 changes for SP04..)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACMAC and STAGE1 changes for SP04.. */

/* --------------------------------------------------- */

/* TRACMAC changes: */

/* T01. EZT Report PROC executes the wrong program. */

/* the EasyTrieve PROC tries to execute ISRC */

/* member symbolic &EZTMOD instead of GJTREZCS */

/* resulting in a S806. */

/* T02. Add REPORT1 DD to PROC. */

/* T03. Add TRACDnnn DD to PROC. */

/* T03. Add new JOBTRA00 config parameter: PRGDEFER=60 */

/* T04. Add comments to Easytrieve reporting jobs to */

/* show how to use relative dates. */

/* */

/* STAGE1 changes: */

/* S01. Remove JOBNAM4=JOBTJB04 from STAGE1. */

/* Add PRGDEFER=60 to STAGE1. */

/* S02. Remove Datacom Area DDs from DBRORG. */

/* */

/* Note: Follow ++HOLD instructions. */

/* ---------------------------------------------------------------- */.


PRE (RO02424)

SUP (TF51342).



. Run DBRORG after running the Jobtrac 3.5 to r11 conversion.



. After applying this SYSMOD, perform the following steps.

. Reassemble the TRACMAC Macro using the Stage1 SAMPJCL member

. to generate members for the SAMPJCL and PPOPTION Datasets.

. You should use different SAMPJCL and PPOPTION Datasets as

. the target PDSs if you have customized the original members

. of these datasets. After the TRACMAC assembly, you would need

. to perform the following before making the same customized

. changes to the new members.

. 01. Copy DBRORG from this SAMPJCL PDS into your current

. SAMPJCL. Verify that DBRORG does not contain a IXXnnn,

. EVTnnn, OPTnnn, HISnnn or STGnnn DD statement.

. 02. Verify that the Easytrieve PROC JTEZREPT executes

. PGM=GJTREZCS instead of PGM=&EZTMOD and contains a

. REPORT1 DD.

. 03. Copy JOBTRA00 from this PDS into your current PPOPTION

).





DESC (Abend S0C4/S0C1 in GJTRTRTB)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Abend S0c4/S0c1 in GJTRTRTB */

/* ---------------------------------------------------------------- */

/* After Ptf RO07180 jobs may receive a S0C4 or S0C1 */

/* abend in module GJTRTRTB. Jobs complete normally, */

/* but a dump is generated. */

/* ---------------------------------------------------------------- */.


PRE (RO07180)

SUP (T4N1221).






/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 MAY 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */


/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.



RO03625,RO03661,RO04349,RO04385,RO04440,RO04442,

RO04515,RO04517,RO04527,RO04627,RO04680,RO04717,

RO04966,RO05032,RO05084,RO05124,RO05142,RO05164,

RO05235,RO05239,RO05241,RO05282,RO05283,RO05321,

RO05346,RO05347,RO05394,RO05508,RO05529,RO05581,

RO05595,RO05711,RO05729,RO05758,RO05764,RO05776,

RO05816,RO05841,RO06191,RO06204,RO06209,RO06234,

RO06240,RO06262,RO06268,RO06290,RO06317,RO06330,

RO06335,RO06353,RO06360,RO06399,RO06401,RO06403,

RO06411,RO06413,RO06414,RO06427,RO06429,RO06442,

RO06457,RO06469,RO06488,RO06511,RO06583,RO06638,

RO06645,RO06702,RO06708,RO06711,RO06718,RO06824,

RO06845,RO06890,RO07056,RO07060,RO07151,RO07180,

RO07214,RO07230,RO07286,RO07312,RO07317,RO07318,

RO08327)

SUP (TF51343).





DESC (J-DEP POSSIBLE EVEN THOUGH EDEP/IMOD ENDS WITH RC=0)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 JUN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* J-DEP POSSIBLE EVEN THOUGH EDEP/IMOD ENDS WITH RC=0 */

/* ---------------------------------------------------------------- */

/* IF AN EDEP/IMOD GOES THROUGH A RETRY CYCLE BECAUSE */

/* IT DOESN'T TERMINATE WITH RC=0, THEN THE CONNECTED */

/* EVENT MAY BE FLAGGED WITH A J-DEP EVEN THOUGH THE */

/* FINAL RETRY SUCCESSFULLY TERMINATES WITH RC=0. */

/* ---------------------------------------------------------------- */.


PRE (RO06429)

SUP (T18D623).





DESC (JOBTRAC TERMINATES AFTER S214-0C FOR TASK 0SYSARCH.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 JUN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOBTRAC TERMINATES AFTER S214-0C FOR TASK 0SYSARCH. */

/* ---------------------------------------------------------------- */

/* AN I/O ERROR DURING CLOSE OF THE ARCHIVE MEDIA FOR */

/* TASK 0SYSARCH RESULTS IN ABEND S214-0C, TERMINATES */

/* JOBTRAC AFTER ABENDS U0202 AND U0203, AND 0SYSARCH */

/* REMAINS IN STATUS "WAIT EXEC" FOREVER. */

/* ---------------------------------------------------------------- */.


PRE (QO89805)

SUP (T18D628).





DESC (R-DEP NOT CLEARED IF DIFFERENT OSD'S FOR RESOURCES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 JUN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* R-DEP NOT CLEARED IF DIFFERENT OSD'S FOR RESOURCES. */

/* ---------------------------------------------------------------- */

/* IF EVENTS XYZ NEEDED FOR RESOURCE CHECKING (BECAUSE */

/* OF ENTRY "RESOURCE=RS/SCHD=XYZ" IN PPOPTION) HAVE */

/* DIFFERENT OSD'S DEFINED, THEN THE "R-DEP" FLAG MAY */

/* NOT BE CLEARED AFTER ALL EVENTS XYZ ARE SCHEDULED. */

/* ---------------------------------------------------------------- */.


PRE (RO06890)

SUP (T18D624).





DESC (EVENT STATUS MAY NOT BE ACCURATE ON REPORTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 JUN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT STATUS MAY NOT BE ACCURATE ON REPORTS */

/* ---------------------------------------------------------------- */

/* The event status (CURR STAT column) on the Job */

/* Summary (GJTREZJS), Job Worksheet (GJTREZJW) and */

/* Forecast (GJTREZFC) reports may not be accurate. */

/* ---------------------------------------------------------------- */.


PRE (RO05776,RO07060)

SUP (T5EA088).





DESC (Autoschd jobs do not run when Jobtrac on Hold)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 JUN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Autoschd jobs do not run when Jobtrac on Hold */

/* ---------------------------------------------------------------- */

/* In r3.5, Only Q dep jobs were placed on hold, so */

/* other Autoschd jobs were allowed to run and */

/* therefore would not be affected if CA-Jobtrac HOLD */

/* was issued. In r11, due to changes in architecture, */

/* all Autoschd jobs are placed on hold and then */

/* released once their information is processed. Since */

/* this job release is done by CA Jobtrac's STC, then */

/* the release was affected by the HOLD command. This */

/* PTF allows these jobs to be released even if CA */

/* Jobtrac is on HOLD. This provides the same */

/* functionality as r3.5. */

/* ---------------------------------------------------------------- */.


PRE (RO07056)

SUP (T4N1216).





DESC (Module Names GJTRMAIV/GJTRMAHI were changed in r11)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 JUN 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Module Names GJTRMAIV/GJTRMAHI were changed in r11 */

/* ---------------------------------------------------------------- */

/* The program names for the Archive and History purge */

/* utilities were changed from GJTRMAIV to GJTRJARC, */

/* and GJTRMAHI to GJTRJPRG, respectively. This */

/* requires that existing jobs that were used with */

/* r3.5 have to be changed to use the new program */

/* names. This change adds an ALIAS for each module to */

/* support the r3.5 module names. All r3.5 parameters */

/* for these two utilities are supported in the r11 */

/* version, but additional parameters are support in */

/* r11. For GJTRJPRG/GJTRMAHI you have to add a */

/* //JOBTRACn DD DUMMY to identify the token for the */

/* Jobtrac you want to process against. */

/* ---------------------------------------------------------------- */.


PRE (RO06191,RO01761)

SUP (T4N1218).





DESC (SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SED(ETAIL) PANEL: "MAX CC" CANNOT BE RESET TO N/A. */

/* ---------------------------------------------------------------- */

/* IF AN EVENT IS ADDED WITH A MAXIMUM CONDITION CODE, */

/* THEN IT CANNOT BE RESET (TO N/A) ON THE SED PANEL. */

/* ---------------------------------------------------------------- */.


PRE (RO06702)

SUP (T18D633).





DESC (K=E COMMAND MAY SHOW COMPLETED/ABENDED JOBS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* K=E COMMAND MAY SHOW COMPLETED/ABENDED JOBS */

/* ---------------------------------------------------------------- */

/* The K=E command that displays executing jobs may */

/* incorrectly show completed or abended jobs. */

/* ---------------------------------------------------------------- */.


PRE (RO07317)

SUP (T5EA089).





DESC (S0C4 ABEND, IF RUNNING GJTRJPRG WITHOUT FILE SYSIN.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 ABEND, IF RUNNING GJTRJPRG WITHOUT FILE SYSIN. */

/* ---------------------------------------------------------------- */

/* FILE SYSIN INCLUDES CONTROL STATEMENTS FOR UTILITY */

/* "GJTRJPRG" TO PURGE (OLD) HISTORY DATA. */

/* ---------------------------------------------------------------- */.


PRE (RO01761)

SUP (T18D636).





DESC (S0C7 ABEND IF SPECIFYING LOC="1 " ON THE ADD PANEL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND IF SPECIFYING LOC="1 " ON THE ADD PANEL */

/* ---------------------------------------------------------------- */

/* IF THE LOCATION ON THE ADD PANEL INCLUDES TRAILING */

/* BLANKS, ABEND S0C7 WILL OCCUR IN GJTRVSPF (ISPF). */

/* ---------------------------------------------------------------- */.


PRE (RO09129)

SUP (T18D627).





DESC (FAILING AUTO-SCHED JOB WILL RELEASE SUCCESSOR EVENT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FAILING AUTO-SCHED JOB WILL RELEASE SUCCESSOR EVENT */

/* ---------------------------------------------------------------- */

/* IF AN AUTOSCHD JOB IS A PREDECESSOR OF ANOTHER JOB */

/* AND IF IT COMPLETES ABNORMALLY (FOR EXAMPLE ABEND), */

/* THEN IT WILL STILL RELEASE THE SUCCESSOR EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO06583)

SUP (T18D622).





DESC (Schedules do not restage when o removed)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Schedules do not restage when o removed */

/* ---------------------------------------------------------------- */

/* When a schedule load fails, the event gets an O */

/* (OUTPUT) dependency. When the O dependency is */

/* removed, the event completes and any successors are */

/* released. This change restages the event, and any */

/* successors remain with a P dependency. */

/* ---------------------------------------------------------------- */.


PRE (RO09231)

SUP (T4N1219).





DESC (P/S VERSION NOT DEFAULTING TO "1", IF "DATE=*" USED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P/S VERSION NOT DEFAULTING TO "1", IF "DATE=*" USED */

/* ---------------------------------------------------------------- */

/* IF A DATE OF "*" IS USED WHEN DEFINING A SUCCESSOR */

/* OR PREDECESSOR ON A CONTINUATION LINE (SCL MEMBER) */

/* THEN A VERSION OF "0001" SHOULD ALWAYS BE ASSIGNED. */

/* HOWEVER, IF THE P/S EVENT DOES ALREADY EXIST ON THE */

/* CHECKPOINT WITH A VERSION OTHER THAN "0001", THEN */

/* WE ERRONEOUSLY CONNECT TO THIS EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO07286)

SUP (T18D626).





DESC (MONITOR SYSTEM WASN'T SET UP TO SEND "LATE" EMAILS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MONITOR SYSTEM WASN'T SET UP TO SEND "LATE" EMAILS. */

/* ---------------------------------------------------------------- */

/* IF THE EMAIL INTERFACE IS ONLY DEFINED FOR THE PRI- */

/* MARY SYSTEM, THEN A MONITOR SYSTEM WILL GET ERROR */

/* MESSAGES TRAC130E AND TRAC131I, IF IT TRIES TO SEND */

/* AN EMAIL FOR AN EVENT JUST BECOMING LATE. */

/* ---------------------------------------------------------------- */.


PRE (RO06429)

SUP (T18D630).





DESC (RESTART CMD DOESN'T RE-ESTABLISH P/S RELATIONSHIPS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* RESTART CMD DOESN'T RE-ESTABLISH P/S RELATIONSHIPS. */

/* ---------------------------------------------------------------- */

/* ASSUME EVENT B IS A SUCCESSOR OF EVENT A, AND BOTH */

/* EVENTS COMPLETED ALREADY. RESTAGING THEM WITH THE */

/* R(ESTART) LINE CMD (FIRST FOR EVENT B, THEN FOR A) */

/* WILL RESULT IN A "J-DEP" FOR BOTH EVENTS, BUT EVENT */

/* B SHOULD HAVE A "JP-DEP", BECAUSE THE RESTAGED VER- */

/* SION OF THE PREDECESSOR EVENT A ISN'T COMPLETE YET. */

/* ---------------------------------------------------------------- */.


PRE (RO09218)

SUP (T18D632).





DESC (JOBNAME AND VERSION MISSING FOR TRAC822I + TRAC824I)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOBNAME AND VERSION MISSING FOR TRAC822I + TRAC824I */

/* ---------------------------------------------------------------- */

/* THE JOBNAME AND THE VERSION IS MISSING ON THE ERROR */

/* MESSAGES TRAC822I/824I FOR CROSS PLATFORM EVENTS. */

/* ---------------------------------------------------------------- */.


PRE (RO08907)

SUP (T18D638).





DESC (F LINE IN FORECAST MODE / @ LINE FOR ABENDED EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* F LINE IN FORECAST MODE / @ LINE FOR ABENDED EVENT. */

/* ---------------------------------------------------------------- */

/* USING "F" LINE COMMAND IN FORECAST MODE RESULTS IN */

/* ERROR MESSAGE "INTERNAL ERROR" AND HITTING PF1 KEY */

/* DISPLAYS "@SLGS FAILURE IN ACTIVE ADR TABLE.". */

/* USING "@" LINE COMMAND FOR AN ABENDED EVENT OR SCL */

/* KEEPS IT IN STATUS "AWAITING SUBMISSION" FOREVER. */

/* ---------------------------------------------------------------- */.


PRE (RO09315)

SUP (T18D637).





DESC (Inefficient sequential processing caused delay)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Inefficient sequential processing caused delay */

/* ---------------------------------------------------------------- */

/* In some instances, key sequential processing was */

/* being used when only a small number of records were */

/* being processed. This could cause a high number of */

/* logical requests in Datacom, reading 100's of */

/* records when only a few would be used. A more */

/* efficient method has been substituted for this */

/* processing. */

/* ---------------------------------------------------------------- */.



RO06429,RO07317)

SUP (T4N1215).





DESC (JT/R11 DISPLAYS AND PROCESSES DUPLICATE AMR ENTRIES)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JT/R11 DISPLAYS AND PROCESSES DUPLICATE AMR ENTRIES */

/* ---------------------------------------------------------------- */

/* JOBTRAC RELEASE 3.5 BYPASSED DUPLICATE AMR ENTRIES */

/* AND THIS CHANGE WILL MAKE IT THE SAME FOR R11 TOO, */

/* THAT IS. YOU CAN HAVE DUPLICATE AMR ENTRIES, BUT */

/* THEY WILL (NOW) ONLY BE PROCESSED ONCE. A "BACK" IS */

/* REQUIRED TO IMPLEMENT THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (RO05124,QO89757)

SUP (T18D635).





DESC (S0C7 IN GJTRBHSM POSSIBLE DURING REVERSE CONVERSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 IN GJTRBHSM POSSIBLE DURING REVERSE CONVERSION */

/* ---------------------------------------------------------------- */

/* IT ONLY OCCURS, IF THE SAME DATABASE IS CONVERTED */

/* MULTIPLE TIMES FROM JT35 TO JT/R11 AND VICE VERSA. */

/* ---------------------------------------------------------------- */.


SUP (T18D642).





DESC (R35: AMR ENTRY NOT LISTED AFTER REVERSE CONVERSION.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* R35: AMR ENTRY NOT LISTED AFTER REVERSE CONVERSION. */

/* ---------------------------------------------------------------- */

/* IF THE AMR TABLE INCLUDES EXACTLY A MULTIPLE OF 12 */

/* ENTRIES, THEN THE (TOP-LINE) CMD "AMR" (OR "WTOS") */

/* SHOWS AN EMPTY TABLE (PANEL "JTSP022") FOR JOBTRAC */

/* RELEASE 3.5 AFTER REVERSE CONVERSION. */

/* ---------------------------------------------------------------- */.


PRE (RO01723)

SUP (T18D631).





DESC (REVERSE CONVERSION: CONF. PANEL BUT NO CHANGE MADE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 JUL 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION: CONF. PANEL BUT NO CHANGE MADE. */

/* ---------------------------------------------------------------- */

/* SELECTING AN EVENT UNDER JOBTRAC R35 AFTER REVERSE */

/* CONVERSION (FROM R11) WILL CAUSE THE CONFIRMATION */

/* PANEL TO SHOW UP, EVEN IF NO CHANGE WAS MADE. */

/* ---------------------------------------------------------------- */.


PRE (RO01723)

SUP (T18D643).





DESC (REVERSE CONVERSION: P/S MISSING AND STRANGE BUSGRP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION: P/S MISSING AND STRANGE BUSGRP. */

/* ---------------------------------------------------------------- */

/* IF THERE ARE MORE THAN 16 PREDECESSORS AND/OR SUC- */

/* CESSORS FOR A SINGLE JOB DURING REVERSE CONVERSION */

/* THEN ONE OF THE P/S'ES IS MISSING AND THE "BUSGRP" */

/* FIELD INCLUDES GARBAGE (IN JT35). */

/* ---------------------------------------------------------------- */.


PRE (RO01421)

SUP (T18D641).





DESC (REVERSE CONVERSION ADDS NEEDLESS EDEP/ARG RECORDS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION ADDS NEEDLESS EDEP/ARG RECORDS. */

/* ---------------------------------------------------------------- */

/* IF EDEP'S ARE DEFINED WITHOUT ARGUMENTS, REVERSE */

/* CONVERSION WILL CREATE ARGUMENT RECORDS FOR THE */

/* EDEP'S WITH DUMMY (BLANK) ARGUMENT ENTRIES. */

/* ---------------------------------------------------------------- */.


PRE (RO01723)

SUP (T18D644).





DESC (STATUS "NOT SCHD" FOR ARCHIVED P/S AFTER CONVERSION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* STATUS "NOT SCHD" FOR ARCHIVED P/S AFTER CONVERSION */

/* ---------------------------------------------------------------- */

/* ARCHIVED PREDECESSORS (WITH STATUS OF "(ARCHIVED)" */

/* FOR JT35) WILL SHOW A STATUS OF "(NOT SCHD)" AFTER */

/* CONVERSION TO JT/R11. ALSO, LEAVING THE SED PANEL */

/* FOR A NEWLY CONVERTED EVENT MAY CAUSE THE CONFIRMA- */

/* TION PANEL TO SHOW UP ALTHOUGH NO CHANGE WAS MADE. */

/* ---------------------------------------------------------------- */.


PRE (RO09124,RO01067,RO01724)

SUP (T18D639).





DESC (Cyclic Calendar not reset for Hardcoded LOCS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 AUG 2009 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* Cyclic Calendar not reset for Hardcoded LOCS. */

/* ---------------------------------------------------------------- */

/* The Cyclic Calendars were not reset for Locations */

/* hardcoded in SCLs. Cyclic Process Periods always */

/* used the Cyclic Calendar for LOC=000. @SETLOCs also */

/* missed resetting the Cyclic Calendars */

/* ---------------------------------------------------------------- */.


PRE (RO09272)

SUP (TF51345).





DESC (Pred & Succ Vers not like 3.5/Threshold Changes Ver)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Pred & Succ Vers not like 3.5/Threshold Changes Ver */

/* ---------------------------------------------------------------- */

/* The selection of the Predecessor or Successor */

/* version works differently than in r3.5. This PTF */

/* restores the method to match the prior release. */

/* This fix also correct a problem where the event */

/* version was being lost when using a "S" or "A" */

/* threshold. */

/* ---------------------------------------------------------------- */.


PRE (RO10362,RO09948)

SUP (T4N1222).





DESC ("MIM/REQUEUE" FEATURE NOT WORKING AFTER PTF RO06209)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "MIM/REQUEUE" FEATURE NOT WORKING AFTER PTF RO06209 */

/* ---------------------------------------------------------------- */

/* THE JES COMMAND "$EJNN,CANCEL" CAUSES A JOB TO BE */

/* REQUEUED FOR RE-EXECUTION ($HASP398), FOR EXAMPLE */

/* IN CASE OF "WAITING FOR DATA SETS" (SEE CA-MIM). */

/* ALLOW TRACWARN FOR EVERY STEP THAT HAS CC FAILURE. */

/* ---------------------------------------------------------------- */.


PRE (RO09948,RO01743,RO06290,RO06411,RO06414,RO06711)

SUP (T18D625).





DESC (CONDITION CODE CHECKS NOT BYPASSED IN CASE OF CC=0.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CONDITION CODE CHECKS NOT BYPASSED IN CASE OF CC=0. */

/* ---------------------------------------------------------------- */

/* IF A STEP ENDS WITH A CONDITION CODE OF ZERO, THEN */

/* NO "CC CHECKS" SHOULD BE DONE AT ALL FOR THIS STEP. */

/* ---------------------------------------------------------------- */.


PRE (RO10452)

SUP (T18D629).





DESC (MIM/REQUEUE: REQUEUED JOB MAY BE FLAGGED WITH S222.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MIM/REQUEUE: REQUEUED JOB MAY BE FLAGGED WITH S222. */

/* ---------------------------------------------------------------- */

/* A JOB REQUEUED FOR RE-EXECUTION (EITHER BY CA-MIM */

/* OR JES CMD "$EJNN,CANCEL" IN CASE OF "WAITING FOR */

/* DATA SETS") MAY GET FLAGGED WITH ABEND S222 WHILE */

/* WAITING FOR RELEASE IN STATUS "WAIT EXEC". IT CAN */

/* ONLY OCCUR, IF THERE'S NO ENF ACTIVITY FOR MORE */

/* THEN 11 MINUTES AFTER REQUEUEING THE JOB. */

/* ---------------------------------------------------------------- */.


PRE (RO10452)

SUP (T18D634).





DESC (Delay the DELETE request of GJTRABTR.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Delay the DELETE request of GJTRABTR. */

/* ---------------------------------------------------------------- */

/* If the deleted job is in termination process */

/* (EVTASOP is on), the DELETE request will be delayed */

/* , so its entry in execution list does not become */

/* orphan. Also Fix the Target/Submit date to "2009" */

/* instead of "1409" when run GJTRABTR (or a */

/* REXX/IMOD) with "MOD(JOB(event) TT(hh:mm *) */

/* SUB_T(hh:mm *))". */

/* ---------------------------------------------------------------- */.


PRE (RO06845)

SUP (TB91767).





DESC (Holiday and Cyclic Calender issues In SCL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Holiday and Cyclic Calender issues In SCL */

/* ---------------------------------------------------------------- */

/* 1. "ERROR=> HOLIDAY OR CYCLE RECORD NOT LOCATED" */

/* msg issued instead of defaulting to a holiday */

/* calendar when location is on event. 2. Calendars */

/* defaults to 000 even if 000 is not defined defined. */

/* Should default to the lowest location calendar */

/* defined. 3. @CYCnnn and @HOLnnn statements show */

/* that the calendar changed, but calendars are not */

/* used for events. 000 is defaulted. */

/* ---------------------------------------------------------------- */.


PRE (RO10446)

SUP (T4N1226).





DESC (Timing Problem Causes Jobs to Hang or CODE=PURGE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Timing Problem Causes Jobs to Hang or CODE=PURGE */

/* ---------------------------------------------------------------- */

/* When jobs are submitted on one system and run on a */

/* different system in the sysplex, it is possible for */

/* the running system to attempt to post the JOB INIT */

/* BEFORE THE JOB NUMBER HAS BEEN SET IN THE RECORD. */

/* This can result in the job init, or other status, */

/* NOT BEING POSTED FOR THE JOB. */

/* A NEW JOBTRA00 KEYWORD IS INTRODUCED WITH THIS PTF, */

/* MONITORDELAY=, TO DELAY THE UPDATE OF THE JOBINIT */

/* FROM A MONITOR SYSTEM, TO ALLOW THE JOB NUMBER TO */

/* BE SET. */

/* THE VALUE IS IN 1/100TH OF A SECOND. */

/* THE PRGDEFER= KEYWORD SHOULD BE USED ALSO TO DELAY */

/* PURGING THE EVENT BEFORETHE STATUS IS UPDATED. */

/* */

/* EXAMPLE: */

/* MONITORDELAY=0300 IF MONITOR CAN'T FIND JOB WAIT 3 */

/* SECS */

/* PRGDEFER=60 DELAY PURGE FOR 60 SECS */

/* */

/* THE DEFAULT VALUE FOR MONITORDELAY IS 0050 (1/2 */

/* SECOND) */

/* THE DEFAULT VALUE FOR PRGDEFER IS 60 (60 SECONDS) */

/* */

/* These parameters do not need to changed unless you */

/* are having problems with jobs that run on a Monitor */

/* system showing as Purged in CA Jobtrac. */

/* ---------------------------------------------------------------- */.


PRE (RO10468,RO10446)

SUP (T4N1229).





DESC (JOB ALREADY EXISTS W/VER,SCL LOAD FAILED & HOL LOOP)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOB ALREADY EXISTS W/VER,SCL LOAD FAILED & HOL LOOP */

/* ---------------------------------------------------------------- */

/* When a SCL event has both a hardcoded version and a */

/* conditional operator (X or +), the check for a */

/* duplicate version may be done before it has been */

/* determined that the event will be added. This gives */

/* a Duplicate Version error which prevents the SCL */

/* from loading, even though the job would not be */

/* scheduled. */

/* */

/* Also correct Loop looking for holiday calendar when */

/* A @WDNNN= IS SPECIFIED IN SCL. */

/* ---------------------------------------------------------------- */.


PRE (RO10616)

SUP (T4N1228).





DESC (REMOTE/XPS EVENTS CAN REMAIN IN STATUS "WAIT EXEC".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REMOTE/XPS EVENTS CAN REMAIN IN STATUS "WAIT EXEC". */

/* ---------------------------------------------------------------- */

/* IT CAN HAPPEN, IF EVENTS "JOBQUEUE" AND "JOBINITU" */

/* ARE PROCESSED MORE OR LESS AT THE SAME TIME. */

/* ---------------------------------------------------------------- */.


PRE (RO10592)

SUP (T18D646).





DESC (SUPPORT FOR THE "F" LINE COMMAND IN FORECAST MODE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 AUG 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SUPPORT FOR THE "F" LINE COMMAND IN FORECAST MODE. */

/* ---------------------------------------------------------------- */

/* USE OF "F" LINE CMD (LIST "ADR DATASET TRIGGERS") */

/* WILL CURRENTLY BE REJECTED WITH MSG "INV. COMMAND". */

/* ---------------------------------------------------------------- */.


PRE (RO06645,RO09329)

SUP (T18D645).





DESC (TRACAUTH: "T" LINE CMD MAY GET MSG "UNAUTHORIZED".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACAUTH: "T" LINE CMD MAY GET MSG "UNAUTHORIZED". */

/* ---------------------------------------------------------------- */

/* IF INTERNAL SECURITY (TABLE TRACAUTH) IS USED WITH */

/* LIMITED ACCESS (FOR EXAMPLE "JAUTH=OA,DAUTH=RAJ"), */

/* THEN THE USE OF THE "T" LINE COMMAND ("TEMPJCL") */

/* MAY BE REJECTED WITH ERROR MESSAGE "UNAUTHORIZED". */

/* ---------------------------------------------------------------- */.


PRE (RO10345,RO06702)

SUP (T18D640).





DESC (MAXCC Fail message, but job completes normally)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MAXCC Fail message, but job completes normally */

/* ---------------------------------------------------------------- */

/* The TRACWARN message saying that a condition code */

/* failure has occured is issued, but the job */

/* completes normally. */

/* */

/* TRACWARN - JOB ... COND CODE=nnnn VERS=... */

/* ---------------------------------------------------------------- */.


PRE (RO10467)

SUP (T4N1233).





DESC (FORECAST P/S VERSIONS NOT LIKE SCHED LOAD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST P/S VERSIONS NOT LIKE SCHED LOAD */

/* ---------------------------------------------------------------- */

/* Differences in Predecessor and Successor versions */

/* have been noticed when comparing a production */

/* schedule load to a forecast. The forecast is */

/* incorrect. */

/* ---------------------------------------------------------------- */.


PRE (RO10616)

SUP (T4N1232).





DESC (S878-10 POSSIBLE, IF ARCHIVING THOUSANDS OF EVENTS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S878-10 POSSIBLE, IF ARCHIVING THOUSANDS OF EVENTS. */

/* ---------------------------------------------------------------- */

/* IF THOUSANDS OF EVENTS WILL BE ARCHIVED BY RUNNING */

/* 0ARCHIVE (UNDER CONTROL OF JOBTRAC), ABEND S878-10 */

/* IS POSSIBLE FOR THE ARCHIVE TASK, BUT JOBTRAC DOES */

/* NOT ABEND. THE NEXT EXECUTION OF THE 0ARCHIVE TASK */

/* WILL THEN ARCHIVE THE REMAINING EVENTS. */

/* ---------------------------------------------------------------- */.


PRE (RO07060,RO01761)

SUP (T18D658).





DESC (Reclaim/Reuse JCIBs to avoid S878 abend.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Reclaim/Reuse JCIBs to avoid S878 abend. */

/* ---------------------------------------------------------------- */

/* S878 abend caused by excessive used JCIBs, this fix */

/* can Reclaim/Reuse JCIBs every minute. This fix also */

/* increase the max. no. of concurrent modify */

/* commands. */

/* ---------------------------------------------------------------- */.


PRE (RO07180,RO09278)

SUP (TB91769).





DESC (REMOVAL OF AN "O-DEP" MAY NOT RESTAGE A FAILED SCL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REMOVAL OF AN "O-DEP" MAY NOT RESTAGE A FAILED SCL. */

/* ---------------------------------------------------------------- */

/* THE REMOVAL OF AN "O-DEP" FROM A FAILED SCL MAY NOT */

/* ALWAYS RESTAGE THAT SCL WITH A "J" DEPENDENCY. */

/* ---------------------------------------------------------------- */.


PRE (RO09268)

SUP (T18D660).





DESC (MSG TRAC844I: EDEP/IMOD LOSES ARGUMENT DURING RETRY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MSG TRAC844I: EDEP/IMOD LOSES ARGUMENT DURING RETRY */

/* ---------------------------------------------------------------- */

/* IF AN EDEP/IMOD HAS ARGUMENTS AND IF A RETRY HAS TO */

/* BE DONE, THE ARGUMENT CAN GET LOST OR THE IMOD GETS */

/* ARGUMENTS FROM ANOTHER IMOD RUNNING AT SAME TIME. */

/* ---------------------------------------------------------------- */.


PRE (RO09318)

SUP (T18D648).





DESC (TRACAUTH: ACCESS NOT ALLOWED EVEN THOUGH IT'S OKAY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACAUTH: ACCESS NOT ALLOWED EVEN THOUGH IT'S OKAY. */

/* ---------------------------------------------------------------- */

/* THE (INTERNAL) SECURITY TABLE TRACAUTH MAY REJECT */

/* UPDATES TO EVENTS WHICH SHOULD BE ALLOWED ACCORDING */

/* TO THE DEFINITIONS IN THE TRACAUTH TABLE. */

/* ---------------------------------------------------------------- */.


PRE (RO10909)

SUP (T18D647).





DESC (A CANCELED EDEP/IMOD REMAINS IN STATUS "EXECUTING".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* A CANCELED EDEP/IMOD REMAINS IN STATUS "EXECUTING". */

/* ---------------------------------------------------------------- */

/* REMOVAL OF "I-DEP" FROM AN EVENT SHOULD CANCEL THAT */

/* EDEP/IMOD, BUT IF IT'S IN "RETRY" STATUS, THEN IT */

/* WILL BE EXECUTED ONE MORE TIME AND FINALLY, IT WILL */

/* REMAIN IN STATUS "EXECUTING" (SEE "EDEP" COMMAND). */

/* ---------------------------------------------------------------- */.


PRE (RO11341)

SUP (T18D649).





DESC (MESSAGE TRACDBRC (CEXL/PUTA) IS ISSUED FOR NJE JOBS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE TRACDBRC (CEXL/PUTA) IS ISSUED FOR NJE JOBS */

/* ---------------------------------------------------------------- */

/* "MUTUAL EXCLUSIVE" PROCESSING ISN'T DONE FOR NJE */

/* JOBS, AND THIS TRACDBRC MSG SHOULD BE SUPPRESSED. */

/* ---------------------------------------------------------------- */.


PRE (RO09059)

SUP (T18D659).





DESC (EVENT CHANGE DOESN'T CANCEL EXISTING EDEP EXECUTION)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EVENT CHANGE DOESN'T CANCEL EXISTING EDEP EXECUTION */

/* ---------------------------------------------------------------- */

/* IF AN EVENT HAS AN I-DEP (EDEP) WHICH IS IN "RETRY" */

/* STATUS, THEN CHANGING THE EVENT TYPE (FOR EXAMPLE */

/* FROM DUMMY TO JOB) WILL RE-SCHEDULE THE EDEP/IMOD */

/* (WHICH IS CORRECT), BUT IT WON'T CANCEL THE "OLD" */

/* EXECUTION OF THE EDEP/IMOD BEING IN RETRY STATUS. */

/* ---------------------------------------------------------------- */.


PRE (QO90293,RO11334)

SUP (T18D650).





DESC (PRED'S CAN BE CHANGED EVEN THOUGH TRACAUTH SAYS NO.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* PRED'S CAN BE CHANGED EVEN THOUGH TRACAUTH SAYS NO. */

/* ---------------------------------------------------------------- */

/* PREDECESSORS CAN BE ADDED, DELETED, UPDATED ON THE */

/* SED PANEL ALTHOUGH THE DEFINITION IN TRACAUTH DOES */

/* NOT ALLOW SUCH CHANGES. */

/* ---------------------------------------------------------------- */.


PRE (RO11432,RO10909)

SUP (T18D657).





DESC ("$" TAKEN AS JES COMMAND CHARACTER ON JES3 SYSTEMS.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "$" TAKEN AS JES COMMAND CHARACTER ON JES3 SYSTEMS. */

/* ---------------------------------------------------------------- */

/* WHEN HOLDING "ABENDED OUTPUT" (SEE GLOBAL OPTIONS), */

/* THEN ALWAYS THE "$" SIGN WAS USED AS JES CMD CHAR. */

/* ---------------------------------------------------------------- */.


PRE (RO05758)

SUP (T18D653).





DESC (SB37 POSSIBLE FOR SYSPRINT FILE IF RUNNING ARCHIVE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SB37 POSSIBLE FOR SYSPRINT FILE IF RUNNING ARCHIVE. */

/* ---------------------------------------------------------------- */

/* THE SYSPRINT FILE IS DYNAMICALLY ALLOCATED FOR THE */

/* "ARCHIVE" TASKS (AND FOR SCHEDULE LOADS). */

/* ---------------------------------------------------------------- */.


PRE (RO07180)

SUP (T18D654).





DESC (JCLTRAC: JOBSCAN ERRONEOUSLY LISTS MESSAGE IEFC612I)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JCLTRAC: JOBSCAN ERRONEOUSLY LISTS MESSAGE IEFC612I */

/* ---------------------------------------------------------------- */

/* THE "JOBSCAN" FEATURE OF JCLTRAC CAN DISPLAY ERROR */

/* MESSAGE "IEFC612I PROCEDURE SRDCPSRT WAS NOT FOUND" */

/* ALTHOUGH THE JCL PROC "SRDCPSRT" DOES REALLY EXIST. */

/* ---------------------------------------------------------------- */.


SUP (T18D661).





DESC (S0C7 Abend in GJTRCIMD with NJE JOBs)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 SEP 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 Abend in GJTRCIMD with NJE JOBs */

/* ---------------------------------------------------------------- */

/* A S0C7 abend can occur when processing the */

/* termination of a NJE job. */

/* ---------------------------------------------------------------- */.


PRE (RO06429)

SUP (T4N1234).





DESC (AUTOSCHD JOB NOT RELEASED, IF "/*PURGE" IN THE JCL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTOSCHD JOB NOT RELEASED, IF "/*PURGE" IN THE JCL. */

/* ---------------------------------------------------------------- */

/* IF THE JCL OF AN AUTO-SCHED JOB INCLUDES THE JES2 */

/* STATEMENT "/*PURGE", THEN IT WON'T BE RELEASED, */

/* THAT IS IT REMAINS IN HOLD STATUS FOREVER. A "BACK" */

/* IS REQUIRED TO ACTIVATE THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (RO07180)

SUP (T18D651).





DESC (JOB ERRONEOUSLY FLAGGED/NOT FLAGGED WITH JCL ERROR.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOB ERRONEOUSLY FLAGGED/NOT FLAGGED WITH JCL ERROR. */

/* --------------------------------------------------- */

/* 1) INVALID LOGON MSGS FOR RUNNING JOB STEP PROGRAMS */

/* WILL CAUSE THE JOB TO BE FLAGGED WITH A "JCL ERROR" */

/* ALTHOUGH THE JOB FINALLY TERMINATES SUCCESSFULLY; */

/* THIS MAY FOR EXAMPLE HAPPEN, IF CICS RUNS AS BATCH */

/* JOB UNDER CONTROL OF JOBTRAC RELEASE 11. */

/* 2) A JOB WON'T BE FLAGGED WITH A "JCL ERROR", IF */

/* JES ABNORMALLY TERMINATES IT WITH MESSAGE $HASP396. */

/* ---------------------------------------------------------------- */.


PRE (RO10468)

SUP (T18D662).





DESC (CA Jobtrac is not returning status to Autosys)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CA Jobtrac is not returning status to Autosys */

/* ---------------------------------------------------------------- */

/* When work is request by Autosys or JMO to CA */

/* Jobtrac the jobs are scheduled and run by Jobtrac */

/* on zOS, but status of these jobs is not being sent */

/* back to the requesting system. The jobs stay in a */

/* submitted status and never complete. */

/* ---------------------------------------------------------------- */.


SUP (T4N1225,T4N1223,T4N1224).





DESC (Z LINE CMD NOT RECAPTURING SYSOUT OF COMPLETED JOBS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Z LINE CMD NOT RECAPTURING SYSOUT OF COMPLETED JOBS */

/* ---------------------------------------------------------------- */

/* THE 'Z' LINE CMD CAN BE USED TO RE-CAPTURE SYSOUT */

/* OF COMPLETED JOBS, WHICH WASN'T DONE SINCE R11. */

/* ---------------------------------------------------------------- */.


PRE (RO10710,RO11725,RO11758)

SUP (T18D663).





DESC (TRAC020I MISSES THE LOCATION, IF NJE JOB FROM JT35.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC020I MISSES THE LOCATION, IF NJE JOB FROM JT35. */

/* ---------------------------------------------------------------- */

/* IF AN NJE JOB IS SUBMITTED FROM JT35 TO JT/R11, THE */

/* MESSAGE "TRAC020I" DOESN'T INCLUDE ANY LOCATION. */

/* ALSO, MESSAGE COMPRESSION ISN'T DONE CORRECTLY, IF */

/* THE BUSGROUP IS MISSING, THAT IS INCLUDES BLANKS. A */


/* ---------------------------------------------------------------- */.


PRE (RO11873)

SUP (T18D652).





DESC (FORECAST RC=0 EVEN IF SCL CONTAINS A SYNTAX ERROR)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST RC=0 EVEN IF SCL CONTAINS A SYNTAX ERROR */

/* ---------------------------------------------------------------- */

/* When GJTRFCST is executed to load a schedule(s) to */

/* the forecast database, RC=0 will be returned even */

/* if a schedule contains a syntax error. */

/* ---------------------------------------------------------------- */.


PRE (RO10710)

SUP (T5EA091).





DESC (ABORT FUNCTION NOT WORKING FOR 1ST HR AFT MIDNIGHT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABORT FUNCTION NOT WORKING FOR 1ST HR AFT MIDNIGHT. */

/* ---------------------------------------------------------------- */

/* AN ABORT TIME THRESHOLD DEFINED FOR THE FIRST HOUR */

/* AFTER MIDNIGHT (AS 00:17) ISN'T HONORED. PERHAPS, */

/* IT GETS CARRIED OUT ONE DAY LATER (AT 00:00). */

/* ---------------------------------------------------------------- */.


PRE (RO11165)

SUP (T18D664).





DESC (NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE SURROGATE ENTRY BUILT FOR NJE JOB ON LOCAL NODE */

/* ---------------------------------------------------------------- */



/* "/*ROUTE XEQ DESTID") AND THIS NJE SURROGATE EVENT */

/* WILL REMAIN IN "WAIT EXEC" STATUS FOREVER, IF THE */

/* "DESTINATION ID" BELONGS TO THE LOCAL JES NODE. A */


/* ---------------------------------------------------------------- */.


PRE (RO12261)

SUP (T18D656).





DESC (MSG TRAC014E/RC=15 FOR LOCAL NJE JOBS, IF INTERVAL.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MSG TRAC014E/RC=15 FOR LOCAL NJE JOBS, IF INTERVAL. */

/* ---------------------------------------------------------------- */

/* THE SECOND ITERATION OF AN "INTERVAL" JOB WILL GET */

/* MESSAGE TRAC014E WITH RC=15 IF NOT ROUTED TO A REAL */

/* NJE REMOTE NODE, BUT HANDLED BY THE MONITOR SYSTEM. */

/* ---------------------------------------------------------------- */.


PRE (RO11195)

SUP (T18D666).





DESC (NO ASAP STARTTIME AFTER RESTAGE IN CASE OF AN ABEND)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 OCT 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NO ASAP STARTTIME AFTER RESTAGE IN CASE OF AN ABEND */

/* ---------------------------------------------------------------- */

/* IF THERE'S A FUTURE TARGET TIME FOR AN EVENT, THEN */

/* THIS WILL BE USED AS START TIME AFTER THE EVENT WAS */

/* RESTAGED FOR RESTART IN CASE OF AN ABEND. */

/* ---------------------------------------------------------------- */.


PRE (RO12442)

SUP (T18D670).





DESC (INCORRECT START DATE/TIME AFTER R LINE COMMAND)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 3 NOV 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* INCORRECT START DATE/TIME AFTER R LINE COMMAND */

/* ---------------------------------------------------------------- */

/* If the 'R' line command is used to re-run a job and */

/* a start date/time exists that is different from the */

/* target date/time, the start date/time will be */

/* incorrectly set to the target date/time. */

/* ---------------------------------------------------------------- */.


PRE (RO12254)

SUP (T5EA096).





DESC ("@" LINE CMD WITH 'DEP' OPTION DOESN'T IGNORE PREDS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 NOV 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* "@" LINE CMD WITH 'DEP' OPTION DOESN'T IGNORE PREDS */

/* ---------------------------------------------------------------- */

/* THE "@" LINE COMMAND WITH 'DEP' OPTION CAN BE USED */

/* TO RERUN EVENTS, AND PREDECESSORS SHOULD BE IGNORED */

/* IF THEY WERE ATTACHED DURING INITIAL SCHEDULING. */

/* ---------------------------------------------------------------- */.


PRE (RO12670)

SUP (T18D668).





DESC (JTS: AMR/ADR FEATURE ADDING EVENT WITH VERSION OF 0)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 NOV 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JTS: AMR/ADR FEATURE ADDING EVENT WITH VERSION OF 0 */

/* ---------------------------------------------------------------- */

/* WHEN ADDING AN EVENT WITH THE AMR (OR ADR) FEATURE, */

/* THEN A VERSION OF ZERO IS ASSIGNED TO THAT EVENT, */

/* IF IT CURRENTLY DOESN'T EXIST ON THE CHECKPOINT. */

/* ---------------------------------------------------------------- */.


PRE (RO06708)

SUP (T18D669).





DESC (P-DEP NOT ASSIGNED, IF "@" W/ DEP USED MULT. TIMES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 NOV 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* P-DEP NOT ASSIGNED, IF "@" W/ DEP USED MULT. TIMES. */

/* ---------------------------------------------------------------- */

/* IF THE "@" LINE CMD IS USED WITH 'DEP' OPTION FOR A */

/* PREDECESSOR EVENT, THEN THE SUCCESSOR EVENT SHOULD */

/* BE FLAGGED WITH A 'P-DEP', IF IT DIDN'T RUN YET. */

/* ---------------------------------------------------------------- */.


PRE (RO12716)

SUP (T18D671).





DESC (SCL LOAD: CONNECT TO COMPLETE PRED MAY SET 'P-DEP'.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 NOV 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL LOAD: CONNECT TO COMPLETE PRED MAY SET 'P-DEP'. */

/* ---------------------------------------------------------------- */

/* A NEWLY SCHEDULED EVENT WITH A PREDECESSOR DEPEN- */

/* DENCY FOR AN EXISTING BUT COMPLETED EVENT ON THE */

/* CHECKPOINT MAY GET A 'P-DEP' FLAG ASSIGNED. */

/* ---------------------------------------------------------------- */.


PRE (RO11034)

SUP (T18D674).





DESC (Autos JCL, Bad SYSAFF or NJE Node, S0C1, CODE=PURG)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Autos JCL, Bad SYSAFF or NJE Node, S0C1, CODE=PURG */

/* ---------------------------------------------------------------- */

/* WHEN AN AUTO-SCHED JOBS GETS A JCL ERROR, THE JOB */

/* can stay in a Wait Exec due to a timing problem */

/* where the added job cannot be found. A new option, */

/* ENDREQ= has been added to allow the Job Number to */

/* be extracted during job submission. The default is */

/* YES. */

/* */

/* A Job submitted by CA Jobtrac that contains a */

/* SYSAFF= (or S=) on the JOBPARM that specifies a */

/* INVALID NODE OR A /*ROUTE XEQ STATEMENT IS SPECIFIED */

/* with a invalid JES NJE node name will remain in a */

/* Wait Exec status. The JES error does not drive the */

/* IEFUJV exit that CA Jobtrac with the Job Number. */

/* */

/* Delays in updating the Checkpoint from a monitor */

/* system can result in Jobs remaining in WAIT-EXEC or */

/* JOBS COMPLETE WITH A CODE=PURG STATUS. */

/* */

/* This also corrects a S0C1 abend in module GJTRENFM */

/* and adds messages when ENF Checkpoint recovery is */

/* in progress. */

/* ---------------------------------------------------------------- */.



RO10468,QO88475)

SUP (T4N1235,T5EA095).





DESC (S0C4 DURING JOBTRAC STARTUP WITH DIAG IGVINITGETMAIN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 DURING JOBTRAC STARTUP WITH DIAG */

/* IGVINITGETMAIN */

/* ---------------------------------------------------------------- */

/* If a SYS1.PARMLIB DIAGxx member containing the */

/* "TRAPS NAME(IgvInitGetmain)" statement is active */

/* when Jobtrac is started, an S/0C4 abend may occur */

/* in module GJTRMLOC at offset +18A0. The abend */

/* occurs because a storage area returned by a GETMAIN */

/* request is not properly initialized. */

/* ---------------------------------------------------------------- */.


PRE (QO89757,RO12819,RO13311)

SUP (T5EA097).





DESC (TRACFC11E PFT COPY FAILED ISSUED DURING FORECAST RUN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACFC11E PFT COPY FAILED ISSUED DURING FORECAST */

/* RUN */

/* ---------------------------------------------------------------- */

/* The message 'TRACFC11E PFT COPY FAILED - CLEAR */

/* PROCESSING TERMINATED' is issued during a forecast */

/* run if a JTS PFT table entry exists that has a */

/* condcode operator of 'EQ' and a codecode value of */

/* '4095'. */

/* ---------------------------------------------------------------- */.


PRE (RO12308)

SUP (T5EA099).





DESC (ISPF displays START TIME incorrectly.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF displays START TIME incorrectly. */

/* ---------------------------------------------------------------- */

/* The START TIME of schedule record is displayed the */

/* same as TARGET TIME in ISPF after the record is */

/* modified by GJTRABTR. */

/* ---------------------------------------------------------------- */.


PRE (RO10693)

SUP (TB91770).





DESC (Options To Allow Pre-convert of r3.5 JOBHIST/ S0C7)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Options To Allow Pre-convert of r3.5 JOBHIST/ S0C7 */

/* ---------------------------------------------------------------- */

/* This PTF adds new conversion paramters and resolves */

/* a S0C7 abend at GJTRCEVT+412. */

/* */

/* For clients with large Job History files, the */

/* conversion job for r11 can run for several hours. */

/* This can make it difficult to make the switch to */

/* r11 if the window for completing the conversion is */

/* small. This PTF introduces three new parms for the */

/* GJTRCONV program to allow pre-conversion of history */

/* data, so only the most current data has to be */

/* converted when the it is time to switch releases. */

/* Also, if a DBID is provided, the r11 Jobtrac */

/* Intervals no longer have to be loaded before the */

/* conversion can be run. The New Keywords are: */

/* DBID=nnnn The database id that will be populated */

/* with the converted r3.5 data. If specified, CA */

/* Jobtrac r11 internals do not need to be */

/* initialized. By default the DBID is pulled from the */

/* Initialized r11 system for the token specified on */

/* the JOBTRACx DD statement. Jobtrac uses Datacom */

/* DBID 0161 unless this was change during */

/* installation. */

/* */

/* HISTBEFORE=yyddd Indicates that only the JOBHIST */

/* data from before the specified Julian date is to be */

/* converted. Only event history records will be */

/* processed, and only records with Archive dates */

/* prior to the specified date will be converted. All */

/* year values (yy) are considered to be in the 21st */

/* century (20yy). All data with a yy archive date of */

/* 70 or higher are considered 20th century dates and */

/* (19yy) and will be included in the conversion. This */

/* parameter is mutually exclusive with ALLFROM=. */

/* */

/* ALLFROM=yyddd Indicates that all data should be */

/* converted, but the history data should be limited */

/* to history archived after the specified date. All */

/* year values (yy) are considered to be in the 21st */

/* century (20yy). This parameter is mutually */

/* exclusive with HISTBEFORE=. */

/* */

/* Recommended Usage: Instead of converting in a */

/* single job, the process can be split into two jobs. */

/* JOB1 will initialize the database and convert only */

/* the History data before todays date or a very */

/* recent date (the more converted in JOB1, the less */

/* converted in JOB2 when time is more critical). JOB2 */

/* will convert the checkpoint and the remainder of */

/* the history data. using the same date value. */

/* */

/* Using job CONVERT in the SAMPJCL, these two jobs */

/* can be created as follows: */

/* */



Release Service Details/* 1. Copy CONVERT to JOB1 and make the following */

/* change a. Leave the first step, INITDB, which */

/* initializes the databases. This will be needed in */

/* the first job. */

/* */

/* b. Change the EXEC card for step name STEP1 to */

/* specify the parameters DBID= and HISTBEFORE=. */

/* */

/* //STEP1 EXEC PGM=GJTRCONV, // */

/* PARM='DBID=0161,HISTBEFORE=09211' */

/* */

/* Note: the DBID should be the one you are using for */

/* CA Jobtrac r11. DBID 0161 is the default used for */

/* CA Jobtrac, if you did not change it during */

/* install. The Julian date specified should be either */

/* todays date or yesterdays date. */

/* */

/* 2. Copy CONVERT to JOB2 and make the following */

/* changes: a. Remove the first step, INITDB. Data has */

/* already been added by JOB1, so we want to leave it */

/* there */

/* */

/* b. Change the EXEC card for step name STEP1 to */

/* specify the parameters DBID= and ALLFROM=. BE SURE */

/* TO USE THE SAME DBID AND DATE AS WAS SPECIFED ON */

/* THE HISTBEFORE= STATEMENT IN JOB1. Failure to use */

/* the same date will result in either missing data or */

/* errors in conversion, like duplicate records. */

/* */

/* //STEP1 EXEC PGM=GJTRCONV, // */

/* PARM='DBID=0161,ALLFROM=09211' */

/* */

/* JOB1 can be run a day or 2 before the conversion. */

/* Since this Job will only be reading from history */

/* data, it can be run while CA Jobtrac r3.5 is */

/* active. If you keep a large amount of history data, */

/* this job can run several hours. Do not startup CA */

/* Jobtrac R11 using this database until JOB2 is run. */

/* */

/* Once JOB1 have completed, it is a good idea to */

/* reorganize the database. SAMPJCL member DBREORG can */

/* be used for the reorg. This will prevent having to */

/* reorganize the database after JOB2 runs. */

/* */

/* JOB2 should be run during the transition from R3.5 */

/* to R11. Jobtrac r3.5 and r11 should be inactive. */

/* Again, make sure the date on the ALLFROM= matches */

/* the one on HISTBEFORE= in JOB1 before submitting. */

/* This job will run considerably shorter amount of */

/* time depending on the date values specified. */

/* ---------------------------------------------------------------- */.


PRE (RO10345,RO07312,RO00143,RO09948)

SUP (T4N1231).





DESC (S0C7 in ISPF followed by BACKOUT loop)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 in ISPF followed by BACKOUT loop */

/* ---------------------------------------------------------------- */

/* Under unique circumstances, a ISPF ADD command */

/* issued after a L (Network) line command can result */

/* in a S0C7 abend in ISPF, and a repeated backout by */

/* Jobtrac's De-Staging process. This is caused by an */

/* invalid record that is added to the event staging */

/* table. The BACKOUT messages come from CA Datacom, */

/* but are caused by CA Jobtrac. */

/* ---------------------------------------------------------------- */.


PRE (RO12778)

SUP (T4N1240).





DESC (MSG "CMD TASK BUSY" AFTER MODIFY "F JT,LONGERTHAN8")

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 DEC 2009 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MSG "CMD TASK BUSY" AFTER MODIFY "F JT,LONGERTHAN8" */

/* ---------------------------------------------------------------- */

/* MSG "CA-JOBTRAC - COMMAND TASK BUSY" WILL BE ISSUED */

/* AFTER MODIFY CMD "F JT,CMDMEMBER" IS ENTERED WITH A */

/* MEMBER NAME LONGER THAN 8 CHARACTERS. */

/* ---------------------------------------------------------------- */.


PRE (RO09948)

SUP (T18D681).





DESC (Prevent Jobtrac from high I/O problem, because)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Prevent Jobtrac from high I/O problem, because */

/* ---------------------------------------------------------------- */

/* there is no wait time between I/O retries. Prevent */

/* Jobtrac from abending with S0C4 at GJTRDCOM+062C, */

/* pointer J1@DCMTR has bad address. Send messages - */

/* TRAC182I or TRAC181E when request can not get */

/* exclusive control (RC=61(61)) or update count is */

/* not matched. */

/* */

/* TRAC181E -UPDT_CONT RETRY FAILED AT */

/* module+nnnnn,KEY=keyvalue */

/* */

/* Reason: The update count in the record is not */

/* matched after 10 retries (from the caller) of a PUT */

/* request. */

/* */

/* Action: Collect the information of the problem */

/* event and contact Technical Support. */

/* */

/* TRAC182I -EXCL_CNTL RETRY FAILED AT */

/* module+nnnnn,KEY=keyvalue */

/* */

/* Reason: The retries of I/o request exhausted in */

/* GJTRDCOM due to fail to get exclusive control of */

/* the record. */

/* */

/* Action: This is an informational message. If this */

/* message shows repeatly lots of times and the event */

/* in the keyvalue ran into a problem, please collect */

/* the information of the problem event and contact */

/* Technical Support. */

/* ---------------------------------------------------------------- */.


PRE (RO09948,RO14264)

SUP (TB91768).





DESC (R-DEP REMOVED BY JOBTRAC WHEN UPDATING PRIORITY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 4 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* R-DEP REMOVED BY JOBTRAC WHEN UPDATING PRIORITY */

/* ---------------------------------------------------------------- */

/* Database records are updated, even if they have not */

/* changed, when changing data in the event record. */

/* Associated records for Condition Codes, Resources, */

/* and eMail data are deleted and updated even if they */

/* have not changed. The Audit records also show these */

/* additional changes that where not make by the user. */

/* ---------------------------------------------------------------- */.


PRE (RO13311,RO11621,RO05241)

SUP (T4N1237).





DESC (ERROR UPDATING JTS SCS TABLE WITH SAME COMMAND)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ERROR UPDATING JTS SCS TABLE WITH SAME COMMAND */

/* ---------------------------------------------------------------- */

/* SCS table entries with the same command and */

/* processing period cannot be created even if a */

/* different time range is specified. Additionally, if */

/* Jobtrac r3.5 SCS table entries exist with the same */

/* command and processing period but different time */

/* ranges, only the first of such entries will be */

/* converted when the conversion program is executed; */

/* the remaining SCS table entries will be considered */

/* duplicates and will not be converted. **WARNING** */

/* This change extends the database CMTK key to */

/* include the SCS command time range and interval. */

/* This change has important procedures outlined in */

/* the ++HOLD data that must be followed in order to */

/* properly udpate the Jobtrac database schema and */

/* index. These procedures must be followed in */

/* conjunction with the application of this fix. */

/* ---------------------------------------------------------------- */.


PRE (QO89757,QO99982,RO02218,RO06708,RO07317,RO09969,

RO12308,RO12771,RO11098,RO09060,RO09183,RO04517,

RO01761,RO14303,RO13687)

SUP (T5EA094).

++HOLD(T5EA094) SYSTEM REASON(ACTION) FMID(CHDB000) COMMENT(

.This APAR changes the SCS Command Table key CMTK to include

. the time range and interval. Since the APAR changes the

. programs to specify new key values when accessing the

. table data, it is imperative that the following procedure

. be performed to change the database schema to support the

. key and re-build the database index.

.Following the procedure are two job streams: BTGCHNG1 and

. BTGCHNG2. This is the JCL that is to be tailored and

. executed to perform the schema update and re-indexing.

. BTGCHNG1 updates the primary database and BTGCHNG2

. updates the forecast database.

.The BTGCHNG1 and BTGCHNG2 jobs require the Datacom MUF to be

. UP and Jobtrac to be DOWN. This includes any GSS started

. task(s) that access the Jobtrac database and all Jobtrac

. ISPF user interface sessions. To ensure all connections

. to the Jobtrac database are closed, you can enter the

. following Datacom status command:

. F datacomstc,STATUS

.* ***NOTE*** ***NOTE*** ***NOTE*** ***NOTE*** ***NOTE*** *

.* *

.* If this APAR must be removed (SMP/E RESTORE), the BTGCHNG1 *

.* and BTGCHNG2 jobs should be re-run after the RESTORE *

.* operation to restore the database definitions to the *

.* pre-APAR state. No additional changes need to be made *

.* to the BTGCHNG1 and BTGCHNG2 jobs in order to restore *

.* the previous database definition. *

.* *

.* ***NOTE*** ***NOTE*** ***NOTE*** ***NOTE*** ***NOTE*** *

.Procedure:

. 01. Prepare the JCL for BTGCHNG1 by supplying a valid



Release Service Details. JOB statement and specifying the data set high-level

. qualifiers and the primary database ID (DBID). Use

. your favorite editor to perform a "change all"

. operation for the following:

. From: To:

. =========== ==================================

. '@#JOBTRAC' your Jobtrac data set HLQ

. '@#DATACOM' your Datacom data set HLQ

. '@#PDBIXX' your Jobtrac primary DB index HLQ

. '@#DBCXX' your Datacom CXX HLQ

. 'ppp' your Jobtrac primary DBID

. 02. Prepare the JCL for BTGCHNG2 by supplying a valid

. JOB statement and specifying the data set high-level

. qualifiers and the forecast database ID (DBID). Use

. your favorite editor to perform a "change all"

. operation for the following:

. From: To:

. =========== ==================================

. '@#JOBTRAC' your Jobtrac data set HLQ

. '@#DATACOM' your Datacom data set HLQ

. '@#FDBIXX' your Jobtrac forecast DB index HLQ

. '@#DBCXX' your Datacom CXX HLQ

. 'fff' your Jobtrac forecast DBID

. 03. Apply this APAR

. 04. Ensure the Jobtrac started task, GSS started task(s) that

. access Jobtrac and all Jobtrac ISPF user interface

. sessions are stopped.

. 05. Ensure the Datacom MUF is up.

. 06. Run job BTGCHNG1 to update the Jobtrac primary database

. schema and re-build the index.

. 07. Run job BTGCHNG2 to update the Jobtrac forecast database

. schema and re-build the index.

. 08. Start any GSS started task(s) that were stopped for the

. update

. 09. Start the Jobtrac started task and ensure Jobtrac is

. operating properly

. 10. Start the Jobtrac ISPF user interface and ensure it is

. operating properly

.End of procedure

//BTGCHNG1 JOB (00000001),'BTGCHNG PRIMARY DBID',

// CLASS=A,

// MSGCLASS=X,


// REGION=4096K

//*

//*******************************************************************

//* *

//* JCL TO UPDATE THE JOBTRAC PRIMARY DATABASE SCHEMA; *

//* *

//* - ASSEMBLE BTG FROM .CAIMAC(TRACBTG) *

//* - UPDATE METASTORE IN DATA DICTIONARY *

//* - UPDATE CATALOG WITH NEW DATABASE DEFINITIONS *

//* - REBUILD PRIMARY DATABASE INDEX *

//* *


//* VALUES: *

//* *



//* '@#PDBIXX' HIGH LEVEL QUALIFIER JOBTRAC PRIMARY DB INDEX *

//* '@#DBCXX' HIGH LEVEL QUALIFIER DATACOM CXX *

//* 'ppp' DBID FOR PRIMARY DATABASE *

//* *


//* IF NEEDED ADD MORE SORTWKXX FILES TO THE RETIX STEP *



Release Service Details//* *

//*******************************************************************

//*

//* CLOSE JOBTRAC PRIMARY DATABASE

//*

//CLOSEDB EXEC PGM=DBUTLTY,REGION=2M

//STEPLIB DD DSN=@#DATACOM.CUSLIB,

// DISP=SHR

// DD DSN=@#DATACOM.CAILIB,

// DISP=SHR


//SYSIN DD *

ACCESS STATUS=UTLTY,DBID=ppp,USERS=FAIL

COMM OPTION=CLOSE,DBID=ppp

/*

//*

//* ASSEMBLE AND CREATE BTG0ppp

//*

//ASMBTGC EXEC PGM=ASMA90,REGION=4M,


//*

//*






//SYSPUNCH DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0ppp)





//SYSIN DD *

PRINT NOGEN

TRACBTG DBN=0ppp

END

/*

//*


//*

//DDUPDC EXEC PGM=DDUPDATE


// DISP=SHR

// DD DSN=@#DATACOM.CUSLIB,

// DISP=SHR


// DISP=SHR






//SYSIN DD *


-DEL DATABASE,HD0ppp(,DD,PRIV)

1000 OBSOLETE

-END

// DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0ppp)

// DD *

+CPY DATABASE,HD0ppp(T001,DD,PRIV),PROD

+UPD DATABASE,HD0ppp(PROD,DD,PRIV)

/*

//*

//* CATALOG DATABASE 0ppp

//*

//DDCATC EXEC PGM=DDRTVCAT



Release Service Details//STEPLIB DD DSN=@#JOBTRAC.JT.CAILIB,

// DISP=SHR


// DISP=SHR


// DISP=SHR




//SYSIN DD *


-CXX CATALOG,DATABASE,HD0ppp(T001)

-RTV BASIS,HD0161

/*

//*

//* REBUILD INDEX TO SUPPORT THE UPDATED KEY

//*

//RETIX EXEC PGM=DBUTLTY,REGION=2M




// DISP=SHR

//IXXppp DD DISP=SHR,DSN=@#PDBIXX.IXX0ppp

//CXX DD DSN=@#DBCXX.CXX,

// DISP=SHR






ACCESS STATUS=OFF,DBID=ppp,USERS=WAIT

INIT AREA=IXX,DBID=ppp

RETIX DBID=ppp,SORT=9999999999,OPTION1='(I)'

ACCESS STATUS=WRITE,DBID=ppp

//

//BTGCHNG2 JOB (00000001),'BTGCHNG FORECAST DBID',

// CLASS=A,

// MSGCLASS=X,


// REGION=4096K

//*

//*******************************************************************

//* *

//* JCL TO UPDATE THE JOBTRAC FORECAST DATABASE SCHEMA; *

//* *

//* - ASSEMBLE BTG FROM .CAIMAC(TRACBTG) *

//* - UPDATE METASTORE IN DATA DICTIONARY *

//* - UPDATE CATALOG WITH NEW DATABASE DEFINITIONS *

//* - REBUILD FORECAST DATABASE INDEX *

//* *


//* VALUES: *

//* *



//* '@#FDBIXX' HIGH LEVEL QUALIFIER JOBTRAC FORECAST DB INDEX *

//* '@#DBCXX' HIGH LEVEL QUALIFIER DATACOM CXX *

//* 'fff' DBID FOR FORECAST DATABASE *

//* *


//* IF NEEDED ADD MORE SORTWKXX FILES TO THE RETIX STEP *

//* *

//*******************************************************************

//*

//* CLOSE JOBTRAC FORECAST DATABASE

//*



Release Service Details//CLOSEDB EXEC PGM=DBUTLTY,REGION=2M


// DISP=SHR


// DISP=SHR


//SYSIN DD *

ACCESS STATUS=UTLTY,DBID=fff,USERS=FAIL

COMM OPTION=CLOSE,DBID=fff

/*

//*

//* ASSEMBLE AND CREATE BTG0fff

//*

//ASMBTGF EXEC PGM=ASMA90,REGION=4M,


//*






//SYSPUNCH DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0fff)





//SYSIN DD *

PRINT NOGEN

TRACBTG DBN=0fff

END

/*

//*


//*

//DDUPDF EXEC PGM=DDUPDATE


// DISP=SHR


// DISP=SHR


// DISP=SHR






//SYSIN DD *


-DEL DATABASE,HD0fff(,DD,PRIV)

1000 OBSOLETE

-END

// DD DISP=SHR,DSN=@#JOBTRAC.JT.SAMPJCL(BTG0fff)

// DD *

+CPY DATABASE,HD0fff(T001,DD,PRIV),PROD

+UPD DATABASE,HD0fff(PROD,DD,PRIV)

/*

//*

//* CATALOG DATABASE 0fff

//*

//DDCATF EXEC PGM=DDRTVCAT


// DISP=SHR


// DISP=SHR


// DISP=SHR



Release Service Details//SNAPER DD SYSOUT=*



//SYSIN DD *


-CXX CATALOG,DATABASE,HD0fff(T001)

-RTV BASIS,HD0161

/*

//*

//* REBUILD INDEX TO SUPPORT THE UPDATED KEY

//*

//RETIX EXEC PGM=DBUTLTY,REGION=2M




// DISP=SHR

//IXXfff DD DISP=SHR,DSN=@#FDBIXX.IXX0fff

//CXX DD DSN=@#DBCXX.CXX,

// DISP=SHR






ACCESS STATUS=OFF,DBID=fff,USERS=WAIT

INIT AREA=IXX,DBID=fff

RETIX DBID=fff,SORT=9999999999,OPTION1='(I)'

ACCESS STATUS=WRITE,DBID=fff

//

) .





DESC (MAKE SAMPLE JCL AVAILABLE FROM SMP/E TARGET DATASET)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MAKE SAMPLE JCL AVAILABLE FROM SMP/E TARGET DATASET */

/* --------------------------------------------------- */

/* MAKE SAMPLE JCL AVAILABLE FROM SMP/E TARGET DATASET */

/* /* When Jobtrac is installed by CA MSM the sample */

/* /* JCL normally loaded before the install is not made */

/* /* available. */

/* /* */

/* /* This APAR will require approximately 16 tracks in your */

/* /* CAIPROC and CHDB0XLD libraries. */

/* /* */

/* /* After this fix is applied customers may copy the */

/* /* CAIPROC(CHDSAMP) member to another dataset, make the */

/* /* changes documented in the member, provide a valid JOBCARD, */

/* /* and submit it to create the CA Jobtrac sample JCL library. */

/* /* */

/* /* Customers who have not used CA MSM to install CA */

/* /* Jobtrac (IE, installed CA Jobtrac from a tape */

/* /* or from the PAX file) do not need to take any */

/* /* action. */

/* ---------------------------------------------------------------- */.


SUP (TF51349).


If you installed Jobtrac using CA Mainframe Software Manager

(MSM) then you will need to take some additional steps to make the

Jobtrac sample JCL available.

If you did not install Jobtrac using CA Mainframe Software

Manager then no further action is required.

In either case, this fix may be installed by adding the following

phrase to the SMP/E APPLY and ACCEPT commands:


SMP/E may issue a warning message and end with a return code of four.

This is normal.

After applying this fix, sites that installed Jobtrac using CA

Mainframe Software Manager must perform the following steps:

1. Copy the CAIPROC(CHDSAMP) member to another dataset.

2. Edit the copy of CAIPROC(CHDSAMP) and make the changes documented

in the job.

3. Submit the edited copy of the job. It should complete with a

return code of zero.

The Jobtrac sample JCL file has now been created.

).





DESC (NO 'P-DEP' FOR SUCC, IF ADDING A PRED WITH 'O-DEP'.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NO 'P-DEP' FOR SUCC, IF ADDING A PRED WITH 'O-DEP'. */

/* ---------------------------------------------------------------- */

/* WHEN ADDING A NEW PREDECESSOR (WHICH IS COMPLETE, */

/* BUT STILL HAS 'OUTPUT DEPENDENCY'), THE SUCCESSOR */

/* SHOULD BE FLAGGED WITH A 'PREDECESSOR DEPENDENCY'. */

/* ---------------------------------------------------------------- */.


PRE (RO14312)

SUP (T18D665).





DESC (S0C7 ABEND, IF DEFINING EVENT AS ITS OWN PRED/SUCC.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* S0C7 ABEND, IF DEFINING EVENT AS ITS OWN PRED/SUCC. */

/* ---------------------------------------------------------------- */

/* SCHEDULE LOAD (PGM GJTRVSCH) WILL ABEND WITH S0C7, */

/* IF AN EVENT IS DEFINED AS ITS OWN PREDECESSOR OR */

/* SUCCESSOR. */

/* ---------------------------------------------------------------- */.


PRE (RO10690)

SUP (T18D672).





DESC (SCL: TEST MODE (+TODAY=*) DISPLAYS "ALREADY EXISTS")

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL: TEST MODE (+TODAY=*) DISPLAYS "ALREADY EXISTS" */

/* ---------------------------------------------------------------- */

/* TESTING AN SCL WITH STATEMENT "+TODAY=*" RESULTS IN */

/* MESSAGE "JOB XYZ ALREADY EXISTS WITH VERSION NN..". */

/* ALSO, A HARD-CODED VERSION IN CONJUNCTION WITH A */

/* COND. OPERATOR OF "X" (EXCLUDE) RESULTS IN MESSAGE */

/* TRAC176I, BUT IT SHOULD ABEND THE SCL LOAD W/ RC=8. */

/* ---------------------------------------------------------------- */.


PRE (RO14508)

SUP (T18D673).





DESC (NJE FROM V35 TO JT/R11 RESULTS IN MESSAGE TRAC822I.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE FROM V35 TO JT/R11 RESULTS IN MESSAGE TRAC822I. */

/* ---------------------------------------------------------------- */

/* SUBMITTING AN NJE JOB WITH A VERSION GREATER EQUAL */

/* 10 FROM V35 TO R11 RESULTS IN MESSAGES TRAC822I AND */

/* TRAC847E (REMOTE SYSTEM). A JOBTRAC SYSTEM BACKOUT */

/* ("F JT,BACK") IS REQUIRED TO IMPLEMENT THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (RO12358)

SUP (T18D675).





DESC (FORECAST REPORT HAS DUPLICATE PRED/SUCC RECORDS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST REPORT HAS DUPLICATE PRED/SUCC RECORDS */

/* ---------------------------------------------------------------- */

/* The forecast report GJTREZFC may contain duplicate */

/* predecessor/successor records for an event if the */

/* forecast token is the highest token in the forecast */

/* database and one or more predecessors/successors */

/* are not in the SCL(s) being forecasted. */

/* ---------------------------------------------------------------- */.


PRE (RO09045)

SUP (T5EA100).





DESC (ABEND S0C4 POSSIBLE DURING SHUTDOWN OF JOBTRAC.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 JAN 2010 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* ABEND S0C4 POSSIBLE DURING SHUTDOWN OF JOBTRAC. */

/* ---------------------------------------------------------------- */

/* ABEND S0C4 MAY HAPPEN DURING SHUT DOWN OF JOBTRAC, */

/* IF STILL SUBMITTING JOBS AT THIS TIME. */

/* ---------------------------------------------------------------- */.


PRE (RO14409)

SUP (T18D689).





DESC (AJO @ Event Reference Process Period Doesn't Work)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AJO @ Event Reference Process Period Doesn't Work */

/* ---------------------------------------------------------------- */

/* For jobs using the @eventname or @!eventname */

/* process period with a I=SCHD or D=SCHD AJO */

/* statement in their JCL, the statement selection */

/* will not work correctly when the event is on the */

/* checkpoint. */

/* ---------------------------------------------------------------- */.


PRE (RO06429)

SUP (T4N1239).





DESC (GJTRABTR/QUERY MAY LOOP IF EVENT WITH COLLISION KEY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR/QUERY MAY LOOP IF EVENT WITH COLLISION KEY */

/* ---------------------------------------------------------------- */

/* BATCH UTILITY GJTRABTR (OR REXX/IMOD) MAY LOOP, IF */

/* QUERY IS DONE FOR AN EVENT WHICH EXISTS MULTIPLE */

/* TIMES ON THE CHECKPOINT AND ONE OCCURRENCE HAS THE */

/* COLLISION KEY FILLED IN (EG "AWAITING RERUN") AND */

/* "VERSION(HIGHEST)" IS SPECIFIED FOR THE QUERY CMD. */

/* ---------------------------------------------------------------- */.


PRE (RO14263)

SUP (T18D678).





DESC (GJTRJPRG: GOING BACK BEFORE Y2K DELETES ALL HISTORY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJPRG: GOING BACK BEFORE Y2K DELETES ALL HISTORY */

/* ---------------------------------------------------------------- */

/* IF SPECIFYING A DATE BEFORE 2000 (EG W/ DAYS=4000), */

/* THEN UTILITY GJTRJPRG WILL DELETE 'ALL' HISTORY. */

/* ---------------------------------------------------------------- */.


PRE (RO14409)

SUP (T18D679).





DESC (GJTRABTR/QUERY RETURNS STATUS ?? FOR COMPLETED IMOD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR/QUERY RETURNS STATUS ?? FOR COMPLETED IMOD */

/* ---------------------------------------------------------------- */

/* BATCH UTILITY GJTRABTR (OR REXX/IMOD) DISPLAYS A */

/* STATUS OF "??" FOR SUCCESSFULLY COMPLETED IMODS */

/* INSTEAD OF "OK" (FOR COMMANDS QUERY AND GET). */

/* ---------------------------------------------------------------- */.


PRE (RO12254)

SUP (T18D680).





DESC (GJTRJPRG/STTDAYS: ONLY PURGES FROM 1ST SYSID FOUND.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 JAN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJPRG/STTDAYS: ONLY PURGES FROM 1ST SYSID FOUND. */

/* ---------------------------------------------------------------- */

/* UTILITY GJTRJPRG WITH INPUT "STTDAYS=NNN" WILL ONLY */

/* PURGE RECORDS FROM THE FIRST SYSTEM IT FINDS ON THE */

/* DATABASE, THAT IS STATISTIC RECORDS FROM OTHER */

/* SYSTEMS (JOBTRAC/MONITOR) WILL NEVER BE PURGED. */

/* ---------------------------------------------------------------- */.


PRE (RO14890)

SUP (T18D682).





DESC (TRACING IS DONE FOR EVERY CALL OF IMOD $UNIJT_INIT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACING IS DONE FOR EVERY CALL OF IMOD $UNIJT_INIT. */

/* ---------------------------------------------------------------- */

/* AN EXTRA "TRACE I" INSTRUCTION IN IMOD $UNIJT_INIT */

/* CAUSES TRACING RECORDS TO BE WRITTEN TO GSS' */

/* ISRVLOG DURING EVERY CALL/EXECUTION. NOTE: AFTER */

/* APPLY, PLEASE RUN STEPS FROM SMP/E "++HOLD" */

/* SECTION. */

/* ---------------------------------------------------------------- */.


SUP (T18D683).

++HOLD (RO15166) FMID(CHDB000) SYSTEM REASON(ACTION) COMMENT(

After application of this PTF run the following steps:







//SYSIN DD *

PDSLOAD MEMBER $UNIJTIN TO ISET FROM PDSISET -

REPLACE IMOD $UNIJT_INIT

//*






//SYSIN DD *

COMPILE IMOD $UNIJT_INIT IN ISET STATUS PROD

//*

Add the following phrase to the APPLY and ACCEPT commands

to allow SMP/E to install this SYSMOD:

BYPASS(HOLDSYS(ACTION)) ).





DESC (HOURLY WRITTEN STATISTIC RECORDS, STATINTV IGNORED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* HOURLY WRITTEN STATISTIC RECORDS, STATINTV IGNORED. */

/* ---------------------------------------------------------------- */

/* OPTION "STATINTV=1440" (PPOPTION MEMBER JOBTRANN) */

/* SHOULD GENERATE ONLY ONE STATISTIC RECORD (TABLE */

/* STT) PER DAY, BUT REGARDLESS OF THE SETTING FOR */

/* STATINTV ONE RECORD PER HOUR IS CREATED. */

/* ---------------------------------------------------------------- */.


PRE (RO14409)

SUP (T18D686).





DESC (MESSAAGE - TRACDBRC CEXL RC=08(14/048) PUTA)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAAGE - TRACDBRC CEXL RC=08(14/048) PUTA */

/* ---------------------------------------------------------------- */

/* Retry GETNEXT request when inserting jobno into the */

/* entry in Execution list, but the entry is not */

/* found. */

/* ---------------------------------------------------------------- */.


PRE (RO05816)

SUP (TB91771).





DESC (WARNING JCL1070W BUT JCLTABL= HAS DIFFERENT MAXIMUM)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WARNING JCL1070W BUT JCLTABL= HAS DIFFERENT MAXIMUM */

/* ---------------------------------------------------------------- */

/* WARNING MSG JCL1070W, IF JOB INCLUDES MORE THAN */

/* 9000 JCL LINES, WHEN USING THE JCL CHECKER */

/* (JCLTRAC/ONLINE OR JCL3TRAC IN BATCH) EVEN IF */

/* OPTION JCLTABL (IN PPOPTION) DEFINES A DIFFERENT */

/* MAXIMUM. */

/* ---------------------------------------------------------------- */.


SUP (T18D685).





DESC (SCL: WRONG START/TARGET DATE, IF "P" USED ON 12/31.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL: WRONG START/TARGET DATE, IF "P" USED ON 12/31. */

/* ---------------------------------------------------------------- */

/* THE YEARS OF START AND TARGET DATES ARE 1 OFF, IF */

/* THE EVENT IS SCHEDULED ON THE LAST DAY OF A YEAR */

/* WITH DATE "*+1" AND HOLIDAY ACTION "P" AND IF THE */

/* FIRST DAY OF NEXT YEAR IS A HOLIDAY. */

/* ---------------------------------------------------------------- */.


PRE (RO14550)

SUP (T18D688).





DESC (DB2 PLAN BIND FAILS WITH MSGS DSNX200I AND DSNT201I)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* DB2 PLAN BIND FAILS WITH MSGS DSNX200I AND DSNT201I */

/* ---------------------------------------------------------------- */

/* DB2 PLAN BIND FAILS WITH MESSAGES DSNX200I AND */

/* DSNT201I. THIS PROBLEM HAPPENS IN JCLTRAC FOR */

/* PLAN=GJC3TSPF, IF THE ACTUALLY USED DB2 RELEASE IS */

/* 8.1. */

/* ---------------------------------------------------------------- */.


SUP (T18D677).





DESC (Allow CONVERTB to force 5 or 7 digit JobIDs.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 16 FEB 2010 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* Allow CONVERTB to force 5 or 7 digit JobIDs. */

/* ---------------------------------------------------------------- */

/* Allow CONVERTB to force 5 or 7 digit JobIDs using */

/* JOBNUM=5 or JOBNUM=7 as parm to GJTRBCON. */

/* */

/* Note: The new JOBNUM= parameter will be specified */

/* as "//STEP1 EXEC PGM=GJTRBCON,PARM='JOBNUM=x' where */

/* 'x' is either '5' or '7'. */

/* ---------------------------------------------------------------- */.


PRE (RO01421,RO01723)

SUP (TF51347).





DESC (REVERSE CONVERSION: S0C7 IN GJTRBLIB IF MUF IS DOWN)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* REVERSE CONVERSION: S0C7 IN GJTRBLIB IF MUF IS DOWN */

/* ---------------------------------------------------------------- */

/* THE "REVERSE CONVERSION" JOB CONVERTB (FROM */

/* SAMPJCL) WILL FAIL (FOR EXAMPLE WITH ABEND S0C7), */

/* IF THE MUF ADDRESS SPACE IS NOT ACTIVE. */

/* ---------------------------------------------------------------- */.


PRE (RO15414)

SUP (T18D684).





DESC (JOBS NJE'D TO LOCAL NODE STAYS IN WAIT-EXEC)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JOBS NJE'D TO LOCAL NODE STAYS IN WAIT-EXEC */

/* ---------------------------------------------------------------- */

/* If a job specifies a NJE node that is in the same */

/* JESPLEX AS THE PRIMARY CA JOBTRAC THAT SUBMITTED THE */

/* job, the job can stay in a WAIT-EXEC status and */

/* never complete. */

/* ---------------------------------------------------------------- */.


PRE (RO06330,RO14571)

SUP (T4N1242).





DESC (MSG TRAC098W MAY BE ISSUED FOR EVERY SYSOUT CAPTURE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MSG TRAC098W MAY BE ISSUED FOR EVERY SYSOUT CAPTURE */

/* ---------------------------------------------------------------- */

/* MESSAGE TRAC098W MAY OCCUR FOR EVERY CAPTURED JOB, */

/* THAT IS SYSOUT CAPTURE MAY START TOO EARLY AFTER */

/* JOB COMPLETION. */

/* ---------------------------------------------------------------- */.


PRE (RO13311)

SUP (T18D690).





DESC (THE NUMBER of RUNNING JOBS EXCEEDS THE GENERIC VALUE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* THE NUMBER of RUNNING JOBS EXCEEDS THE GENERIC */

/* VALUE */

/* ---------------------------------------------------------------- */

/* THE USE COUNT OF GENERIC RESOURCE IS REDUCED BY ONE */

/* WHEN PURGING A FAILED JOB, THIS CAUSES THE NUMBER */

/* OF RUNNING JOBS DEFINED WITH THE SAME GENERIC */

/* RESOURCE EXCEEDS THE GENERIC VALUE. */

/* ---------------------------------------------------------------- */.


PRE (RO08973)

SUP (TB91773).





DESC (ENFSTATS COMMAND ACTIVATES ENFTRACE STATISTICS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ENFSTATS COMMAND ACTIVATES ENFTRACE STATISTICS */

/* ---------------------------------------------------------------- */

/* Change to add performance statistics to CA */

/* Jobtrac's ENFTRACE logging. A new operator command, */

/* ENFSTATS, has been added to allow the statistics to */

/* be turned on. The statistics data overlays the end */

/* of the existing ENFTRACE records, eliminating some */

/* of the other fields that would be normally be */

/* included. The existing ENFTRON and ENFTROFF */

/* commands still work the same as before, unless */

/* ENFSTATS was previously issued. Then ENFTRON will */

/* turn off the Stats Overlay, and ENFTROFF will turn */

/* off the Stats and the trace logging. As with the */

/* ENFTRON a ENFTRACE DD must be defined in the CA */

/* Jobtrac procedure for the ENFSTATS command to be */

/* effective. */

/* */

/* Sample command: f jobtracy,enfstats */

/* */

/* This is intended to be used at support's request. */

/* The ENFTRACE log that is produced would need to be */

/* sent to CA Jobtrac Support for interpretation. */

/* */

/* SYMPTOMS: N/A */

/* */

/* IMPACT: N/A */

/* */

/* CIRCUMVENTION: N/A */

/* */

/* PRODUCTS AFFECTED: CA Jobtrac r11.0 */

/* ---------------------------------------------------------------- */.


PRE (RO15499,RO11165)

SUP (T4N1243).





DESC (Expanded Forecast Support- Numeric Tokens & Locking)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Expanded Forecast Support- Numeric Tokens & Locking */

/* ---------------------------------------------------------------- */

/* This change allows FORECAST tokens to be */

/* specified as a number from 1 to 255 instead of an */

/* alpha-numeric character and provides a locking */

/* mechanism to control reuse of a token for a period */

/* of time. */

/* */

/* These features require options to be set in */

/* JOBTRA00 in order for them to be active. This PTF */

/* can be applied without affecting your current */

/* forecast processing. */

/* */

/* A numeric token allows for an increased number of */

/* forecasts in the same forecast database. This is */

/* only supported if the new OPTION EXPFCAST=Y is set */

/* in the JOBTRA00 initialization member. */

/* */

/* When EXPFCAST=Y is set, a number from 1 to 255 must */

/* be used to specify the forecast token in the */

/* FORECAST UTILITY - GJTRFCST (FTOKEN=NNN), the */

/* archive utility - GJTRJARC (LIST,FORECAST=nnn), the */

/* ISPF FSWAP command (FSWAP nnn), the JCL validation */

/* utility - JCLTRAC (TYPE(JOBSCAN),FORECAST(nnn)), */

/* and a new CA Easytrieve Forecast report - GJTREZFX: */

/* */

/* DEFINE EVT1-F-TOKEN EVT1-FILTERS 1 B VALUE 100 */

/* */

/* In addition, a new JOBTRA00 keyword provides */

/* a time to reserve the use of a token. */

/* FORECASTLOCK=nnnnn specifies the number of */

/* minutes a forecast token will be held before a */

/* token can be used by another userid. The maximum */

/* value of 20160 will prevent reuse by another user */

/* for 14 days. Specifying zero (0) indicates no */

/* locking should be done. During this time the token */

/* is reserved and only the same User ID can be used */

/* to perform another forecast with this token. Any */

/* other users attempting to run with the token will */

/* receive a message and their job will fail. Return */

/* code 24 will be returned and the report will */

/* display the message: */

/* */

/* **** Error **** Forecast Token ttt is held by */

/* _userid_, Forecast Terminated */

/* */

/* Please refer to the ++HOLD information for */

/* additional installation requirements. */

/* ---------------------------------------------------------------- */.



RO07318,RO10446,RO06411,RO09060)

SUP (T4N1238).


. Two new SAMPJCL members will be generated out of the STAGE1/STAGE2



Release Service Details. install jobs, FORCASTX and GJTREZFX.

. If you are applying this APAR before installing Jobtrac r11 No

. additional changes are required.

. If you are applying this APAR to an existing Jobtrac r11 and are

. planning on using the new EXPFCAST feature. After applying this

. SYSMOD, perform the following steps.

. Reassemble the TRACMAC Macro using the STAGE1 SAMPJCL member.

. Specify the NEWSITE=R option on TRACMAC to only generate the SAMPJCL

. and PPOPTION Datasets. You should use different SAMPJCL and

. PPOPTION Datasets as the target PDSs if you have customized the

. original members of these datasets. After running STAGE1, run

. STAGE2 to create the updated members. Copy members FORCASTX and

. GJTREZFX from the generated SAMPJCL to your Production SAMPJCL.

. Refer to these member for instructions on how to run the forecast

. and the CA Easytrieve report.

).





DESC (EXPAND THE LIMITS FOR 'L' LINE COMMAND.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EXPAND THE LIMITS FOR 'L' LINE COMMAND. */

/* ---------------------------------------------------------------- */

/* List of predecessors and successors has the limit */

/* up to 5,000 events and the maximum I/O count can be */

/* searched up to 20,000. This apar expands the limit */

/* from 5,000 to 7,500 and the maximum I/O count from */

/* 20,000 to 50,000. */

/* ---------------------------------------------------------------- */.


PRE (RO15633)

SUP (TB91766).





DESC (ABEND S0C4 POSSIBLE DURING EXECUTION OF STATUS CMD.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND S0C4 POSSIBLE DURING EXECUTION OF STATUS CMD. */

/* ---------------------------------------------------------------- */

/* ABEND S0C4 MAY HAPPEN DURING EXECUTION OF STATUS */

/* COMMAND. */

/* ---------------------------------------------------------------- */.


PRE (RO15641,RO08338)

SUP (T18D687).





DESC (BUSGRP display select does not work after T4N1238)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* BUSGRP display select does not work after RO15633 */

/* ---------------------------------------------------------------- */

/* After fix RO15633, the BUSGRP display will not */

/* accept a 'S' line command and will put S in front */

/* of all rows in the display. */

/* */

/* SYMPTOMS: S line command does not work. All lines */

/* in the display will have a S displayed in the line */

/* command field to the left of the line. */

/* */

/* IMPACT: BUSGRP display command cannot be used to */

/* display jobs in a BUSGRP. */

/* */

/* CIRCUMVENTION: The B= primary command can be used */

/* from the BUSGRP display to display the jobs in a */

/* BUSGRP. */

/* */

/* PRODUCTS AFFECTED: Jobtrac R11.0 */

/* ---------------------------------------------------------------- */.


PRE (RO15674)

SUP (T4N1249).






/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 FEB 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */


/* --------------------------------------------------- */

/* Genlevel changed to SP05. */

/* Note: The following APARs published contain ++HOLD instructions: */

/* Service Pack APAR - PTF */

/* Jobtrac r11 SP05: RO15633 - T4N1238 */

/* RO15166 - T18D683 */

/* RO14409 - T5EA094 */

/* Jobtrac r11 SP04: RO07318 - TF51342 */

/* RO07180 - T4N1214 */

/* RO06718 - T4N1200 */

/* RO06413 - T5DR043 */

/* RO06335 - T18D601 */

/* Jobtrac r11 SP03: RO02424 - TF51331 */

/* RO02366 - T5DR037 */

/* RO02218 - T5U5085 */

/* RO02125 - T4N1181 */

/* Jobtrac r11 SP02: none */

/* Jobtrac r11 SP01: QO92344 - TF51310 */

/* ---------------------------------------------------------------- */.



RO09060,RO09124,RO09129,RO09183,RO09218,RO09231,

RO09268,RO09272,RO09278,RO09315,RO09318,RO09329,

RO09948,RO09969,RO10067,RO10140,RO10141,RO10225,

RO10226,RO10345,RO10362,RO10446,RO10452,RO10467,

RO10468,RO10592,RO10616,RO10630,RO10690,RO10693,

RO10710,RO10909,RO11006,RO11034,RO11098,RO11165,

RO11195,RO11334,RO11341,RO11432,RO11459,RO11551,

RO11621,RO11725,RO11737,RO11757,RO11758,RO11873,

RO12210,RO12212,RO12254,RO12261,RO12308,RO12356,

RO12358,RO12442,RO12512,RO12670,RO12716,RO12771,

RO12778,RO12819,RO13311,RO13344,RO13687,RO14263,

RO14264,RO14269,RO14270,RO14303,RO14312,RO14409,

RO14433,RO14444,RO14508,RO14550,RO14571,RO14579,

RO14598,RO14613,RO14745,RO14890,RO14943,RO14960,

RO15166,RO15183,RO15322,RO15400,RO15405,RO15406,

RO15414,RO15450,RO15469,RO15499,RO15508,RO15535,

RO15633,RO15641,RO15674,RO15693)

SUP (TF51351).


. Note: The following APARs published contain ++HOLD instructions.

. Please verify that all ++HOLD processes have been completed.

. Service Pack APAR - PTF

. Jobtrac r11 SP05: RO15633 - T4N1238

. RO15166 - T18D683

. RO14409 - T5EA094

. Jobtrac r11 SP04: RO07318 - TF51342

. RO07180 - T4N1214

. RO06718 - T4N1200

. RO06413 - T5DR043

. RO06335 - T18D601

. Jobtrac r11 SP03: RO02424 - TF51331

. RO02366 - T5DR037

. RO02218 - T5U5085

. RO02125 - T4N1181

. Jobtrac r11 SP02: none



Release Service Details. Jobtrac r11 SP01: QO92344 - TF51310

).





DESC (TRACWARN MSG STOPS ITERATIONS OF INTERVAL SCHEDULE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACWARN MSG STOPS ITERATIONS OF INTERVAL SCHEDULE. */

/* ---------------------------------------------------------------- */

/* IF ARCHIVE RUNS WHILE SCHEDULE LOAD IS COMPLETE BUT */

/* SYSOUT CAPTURE ISN'T COMPLETE YET, THEN A TRACWARM */

/* MESSAGE WITH RC=8 IS ISSUED. IF THIS OCCURS FOR AN */

/* INTERVAL SCL, THEN NO ITERATIONS WILL BE DONE. */

/* ---------------------------------------------------------------- */.


PRE (RO15405)

SUP (T18D692).





DESC (ERROR IF INVOKING JT'S CLIST TWICE ON SPLIT SCREENS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ERROR IF INVOKING JT'S CLIST TWICE ON SPLIT SCREENS */

/* ---------------------------------------------------------------- */

/* IF JOBTRAC'S CLIST JTCLIST IS CALLED A SECOND TIME */

/* IN ISPF SPLIT SCREEN MODE, THEN THE SECOND */

/* INVOCATION WILL BE REJECTED WITH MESSAGE "INVALID", */

/* AND PF1 DISPLAYS FOLLOWING MESSAGE: "YOU MAY NOT */

/* HAVE MORE THAN ONE CA-JOBTRAC SESSION AT A TIME". */

/* RETURNING TO THE FIRST CALLED CLIST, IT WILL NOW */

/* GET MESSAGE "JOBTRACX IS INACTIVE", AND IT NEEDS TO */

/* BE RE-INVOKED. PLEASE REFER TO THE "++HOLD" */

/* INFORMATION FOR ADDITIONAL INSTALLATION */

/* REQUIREMENTS. */

/* ---------------------------------------------------------------- */.


PRE (RO15633,RO15641)

SUP (T18D693).


. If you are applying this APAR before installing Jobtrac r11


. If you are applying this APAR to an existing Jobtrac r11 and

. are planning on using the new clist JTCLIST, then after

. applying this SYSMOD, perform the following steps:

. -Reassemble the TRACMAC Macro using the STAGE1 SAMPJCL member.

. -Specify the NEWSITE=R option on TRACMAC to only generate the

. SAMPJCL and PPOPTION Datasets. You should use different

. SAMPJCL and PPOPTION Datasets as the target PDSs if you have

. customized the original members of these datasets.

. -After running STAGE1, run STAGE2 to create the updated members.

. -Finally copy member JTCLIST from the generated SAMPJCL to your

. Production SAMPJCL (or any other used SYSPROC file).

).





DESC (EASYTRIEVE JOB GJTREZJW SHOWS ASAP FOR START VALUE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EASYTRIEVE JOB GJTREZJW SHOWS ASAP FOR START VALUE */

/* ---------------------------------------------------------------- */

/* The Jobtrac SAMPJCL job in member GJTREZJW produces */

/* a report that has ASAP for the start date and time */

/* even after the job has been submitted. */

/* ---------------------------------------------------------------- */.


PRE (RO09045)

SUP (T3C6085).





DESC (JES3: HOLD ABENDING OUTPUT REJECTED W/ MSG IEE305I.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JES3: HOLD ABENDING OUTPUT REJECTED W/ MSG IEE305I. */

/* ---------------------------------------------------------------- */

/* IF "HOLD ABENDING OUTPUT" IS SET TO "Y" (GLOBAL */

/* OPTIONS), THEN ERROR MESSAGE "IEE305I .F COMMAND */

/* INVALID" CAN OCCUR IN CASE OF JES3 AND ABENDING */

/* OUTPUT ISN'T HELD. IF AN ASTERISK ('*') IS USED AS */

/* JES3 COMMAND CHARACTER, THEN THE HOLD CMD WILL BE */

/* REJECTED WITH ERROR MESSAGE "IAT8128 SYNTAX ERROR */

/* AT '=* CA-JOBTRAC HO'". */

/* ---------------------------------------------------------------- */.


PRE (RO12254)

SUP (T18D698).





DESC (LOOP IF GET (OR QUERY) W/ "V(N)" FOR ABENDED EVENT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* LOOP IF GET (OR QUERY) W/ "V(N)" FOR ABENDED EVENT. */

/* ---------------------------------------------------------------- */

/* IF MULTIPLE (GENERIC) REQUESTS WITH "VERSION(NEXT)" */

/* ARE DONE (EITHER WITH UTILITY GJTRABTR IN BATCH OR */

/* WITH A REXX/IMOD) FOR THE SAME EVENT WHICH HAS A */

/* "COLLISION KEY" FILLED IN (AS FOR EXAMPLE FOR */

/* ABENDED JOBS OR INTERVALS JOBS), THEN THE SAME */

/* (ABENDED) EVENT IS LISTED OVER AND OVER, THAT IS */

/* PARAMETER "V(N)" OF THE GET (OR QUERY) REQUEST */

/* DOESN'T RETURN THE NEXT EVENT IF ANY, OR DOESN'T */

/* RETURN "RC=8" TO INDICATE "EOF" ("NO FURTHER */

/* EVENTS"). */

/* ---------------------------------------------------------------- */.


PRE (RO14745)

SUP (T18D696).





DESC (CORRECT LINE COUNT FOR SYSOUT CAPTURE BROWSE)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2010 */

/* HYPER: NO */

/* */



/* ---------------------------------------------------------------- */

/* CORRECT LINE COUNT FOR SYSOUT CAPTURE BROWSE */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


SUP (T5U5088).





DESC (EMAIL FUNCTION FAILS ON LONG EMAIL SERVER REPLY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EMAIL FUNCTION FAILS ON LONG EMAIL SERVER REPLY */

/* ---------------------------------------------------------------- */

/* The EMAIL function in Jobtrac had a 100 byte buffer */

/* for receiving information from the EMAIL server. It */

/* has been changed to have a 256 byte buffer and to */

/* try to receive more data in the event they try to */

/* send more than 256 bytes back. */

/* */

/* The EMail verification utility was changed to issue */

/* messages instead of just hex dump of trace events. */

/* */

/* New Messages: */

/* */

/* TRAC133I EMAIL QUEUED TO MAIL SERVER FOR <Internal */

/* Task> | eventname (Jnnnn) TEMPLATE=tttttttt */

/* */

/* Reason: The email was sent to the email server. */

/* Action: None. */

/* */

/* TRAC136I JOBTRDB RC=rrrr ACTION=aaaaaaa DATACOM */

/* RC=rr(iii) */

/* */

/* Reason: An unexpected Datacom error occurred. */

/* Consult the Datacom messages manual for the return */

/* code and contact CA support for additional */

/* questions. */

/* */

/* TRACCM11 JOBTRDB RC=rrrr ACTION=aaaaaaa DATACOM */

/* RC=rr(iii) */

/* */

/* Reason: An unexpected Datacom error occurred. */

/* Action: Consult the Datacom messages manual for the */

/* return code and contact CA support for additional */

/* questions. */

/* */

/* GJTREMTS-01E TCP/IP ERROR: ERRNO=xxxxx IN TCP/IP */

/* REQUEST rrrrrrrrrrrrrrr */

/* */

/* Reason: The Email process had a communication error */

/* sending the email to the server. Action: Please */

/* review the IBM communication server manual "IP */

/* Sockets Application Programming Interface Guide and */

/* Reference in the "Socket call error return codes" */

/* section. */

/* */

/* GJTREMTS-02E EMAIL SERVER ERROR RESPONSE nnn AFTER */

/* cccc SENT Reason: The Email process received a */

/* buffer from the email server with a command that */

/* was not expected. Action: Call CA support */

/* */

/* GJTREMTS-03I SYSIN: */

/* */

/* Reason: This is the SYSIN card echoed in the job */

/* log Action: None. */

/* */



Release Service Details/* GJTREMTS-04I EZASMI RC=rrrr ERRNO=eeeee TYPE=tttt */

/* */

/* Reason: The Email process had a communication error */

/* sending the email to the server. Action: Please */

/* review the IBM communication server manual "IP */

/* Sockets Application Programming Interface Guide and */

/* Reference in the "Socket call error return codes" */

/* section. */

/* */

/* GJTREMTS-05I DUMP OF area */

/* */

/* Reason: The Email process is displaying the buffer */

/* being sent to the email server and the buffer */

/* received from the email server. */

/* */

/* Action: None */

/* */

/* GJTRXDMP-01I oooo hhhhhhhh *cccccccc* */

/* */

/* Reason: Standard hex dump with offset, hex data and */

/* character Action: None */

/* ---------------------------------------------------------------- */.


PRE (RO01737,QO91799,QO91901)

SUP (T3C6086).





DESC (TRAC169I IS NOT HIGHLIGHTED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRAC169I IS NOT HIGHLIGHTED */

/* ---------------------------------------------------------------- */

/* When an error occurs in loading the EXCLPARM, the */

/* message that is issued TRAC168I, is not highlighted */

/* and therefore is easily missed. */

/* */

/* SYMPTOMS: TRAC168I message is not highlighted. */

/* */

/* IMPACT: Message can be missed. */

/* */

/* CIRCUMVENTION: Use Console Automation product to */

/* highlight message. */

/* */


/* ---------------------------------------------------------------- */.


SUP (T4N1251).





DESC (S0C4 ABEND IN SMF EXIT GJTRU832 AT EARLY IPL STAGE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 MAR 2010 */

/* HYPER: YES */

/* */


/* ---------------------------------------------------------------- */

/* S0C4 ABEND IN SMF EXIT GJTRU832 AT EARLY IPL STAGE. */

/* ---------------------------------------------------------------- */

/* S0C4 ABEND MAY OCCUR IN JOBTRAC'S SMF EXIT GJTRU832 */

/* AT VERY EARLY STAGE DURING IPL, IF NEITHER VINIT */

/* NOR JOBTRAC ITSELF DIDN'T RUN YET TO MAKE JOBTRAC'S */

/* INTERNALS AVAILABLE. PROBLEM STARTS TO SURFACE */

/* SINCE Z/OS 1.11. SMF EXIT IEFU832 WILL BECOME */

/* INACTIVE/DISABLED. */

/* ---------------------------------------------------------------- */.


PRE (RO05124)

SUP (T18D700).





DESC (MONITOR TASKS DON'T SUSP/INTV NODE CLR/INTV M DEP)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 MAR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MONITOR TASKS DON'T SUSP/INTV NODE CLR/INTV M DEP */

/* ---------------------------------------------------------------- */

/* 1. When issuing the CA Jobtrac SUSPEND command on a */

/* monitor system, 5 subtasks do not close their */

/* connections to Datacom. This due to the database */

/* not being accessed by these tasks when running as a */

/* monitor. */

/* */

/* 2. When re-scheduling a crossplatform interval job, */

/* the nodename is lost causing the next interval job */

/* to run incorrectly. */

/* */

/* 3. If an Interval job is put on hold (M-DEP) prior */

/* to the Interval End time the same day and if this */

/* M-DEP is released after the Interval End time on */

/* the next day, then JT/r11 does further iterations */

/* of the interval job, where JT35 stopped it. */

/* */


/* ---------------------------------------------------------------- */.


PRE (RO12512,RO13344,RO14943)

SUP (T4N1244).





DESC (R TYPE AUTO-SCHD ADD DOES NOT RUN WHEN JT ON HOLD)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* R TYPE AUTO-SCHD ADD DOES NOT RUN WHEN JT ON HOLD */

/* ---------------------------------------------------------------- */

/* Auto-Schd jobs that have an Auto-Schd code of R */

/* will either add a job to the checkpoint with the */

/* job's name, or if a job with the same name is */

/* defined on the checkpoint with a Q Dependency, the */

/* job will be used to track the Auto-Schd job. In */

/* r11, if Jobtrac is on hold, these jobs will be held */

/* like Jobtrac submitted jobs until Jobtrac is */

/* Released. In the Jobtrac r3.5, only the jobs that */

/* matched with a Q dependency job are held. If no */

/* matching job was found, and the event is added, the */

/* job would run even though Jobtrac was on hold. */

/* ---------------------------------------------------------------- */.


PRE (RO13311)

SUP (T4N1247).





DESC (ERROR IN ABORT TIME PROCESSING, IF EVENT HAS X-DEP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 6 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ERROR IN ABORT TIME PROCESSING, IF EVENT HAS X-DEP. */

/* ---------------------------------------------------------------- */

/* IF ABORT TIME PROCESSING IS DONE FOR AN EVENT WITH */

/* AN X-DEP ("MUTUAL EXCLUSION DEPENDENCY"), THEN IT */

/* GETS AN XA-DEP ASSIGNED AND POSSIBLE SUCCESSOR */

/* EVENTS WON'T BE POSTED. */

/* ---------------------------------------------------------------- */.


PRE (RO16922)

SUP (T18D695).





DESC (NULL ("//") STATEMENT APPENDED AT END OF EVERY JOB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NULL ("//") STATEMENT APPENDED AT END OF EVERY JOB. */

/* ---------------------------------------------------------------- */

/* JOBTRAC APPENDS A NULL JCL STATEMENT ("//") TO */

/* EVERY SUBMITTED JOB, EVEN IF THE JOB ALREADY */

/* INCLUDES A FINAL NULL STATEMENT. IF THERE IS */

/* ALREADY A FINAL NULL STATEMENT, THEN ALSO A BLANK */

/* LINE IS ADDED AFTER THE EXISTING NULL STATEMENT. */

/* ---------------------------------------------------------------- */.


PRE (RO17066)

SUP (T18D702).





DESC (FORECAST REPORT DOES NOT PAGE BREAK DOCLIB)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST REPORT DOES NOT PAGE BREAK DOCLIB */

/* ---------------------------------------------------------------- */

/* When using DOCLIB (TRACDnnn) in the forecast */

/* Easytrieve report in SAMPJCL members FORECAST and */

/* GJTREZFC, the reports do not page break correctly, */

/* resulting in long pages and some pages with very */

/* few lines. */

/* ---------------------------------------------------------------- */.


PRE (RO14579)

SUP (T4N1245).





DESC (Abending Jobs with O-Deps do not restage.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Abending Jobs with O-Deps do not restage. */

/* ---------------------------------------------------------------- */

/* Abending Jobs with O-Deps do not restage. Removing */

/* the O-Dep has no affect. */

/* ---------------------------------------------------------------- */.


PRE (RO16922)

SUP (TF51352).





DESC (WRONG FORMAT OF LONG INTERNATIONAL DATES ON REPORTS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WRONG FORMAT OF LONG INTERNATIONAL DATES ON REPORTS */

/* ---------------------------------------------------------------- */

/* The format of long international dates in the */

/* Jobtrac reports is yyyy/dd/mm. This is incorrect. */

/* The correct format is yyyy/mm/dd. */

/* */

/* The incorrect date format may also cause a S/0C4 */

/* abend in program GJTREZDO at offset +1A36 during */

/* execution of the forecast report GJTREZFC. */

/* ---------------------------------------------------------------- */.


PRE (RO05776,RO15633,RO09045,RO17156,RO16718)

SUP (T5EA104).





DESC (NJE JOBS DO NOT SHOW EXEC SYSTEM ID)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 14 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE JOBS DO NOT SHOW EXEC SYSTEM ID */

/* ---------------------------------------------------------------- */

/* For NJE jobs, the System ID does not get updated to */

/* show the system where the job ran. It remains set */

/* to the Jobtrac Primary System ID. */

/* ---------------------------------------------------------------- */.


PRE (RO11551)

SUP (T4N1250).





DESC (ABEND U0203 IF UPDATE OF STATISTIC RECORD WILL FAIL)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ABEND U0203 IF UPDATE OF STATISTIC RECORD WILL FAIL */

/* ---------------------------------------------------------------- */

/* IF UPDATE OF THE STATISTIC RECORD FAILS BECAUSE IT */

/* DOESN'T EXIST ANYMORE, THEN FOLLOWING ERROR MESSAGE */

/* "GJTRSTAT DATABASE ERROR - TERMINATING" IS ISSUED */

/* AND JOBTRAC ABENDS WITH USER ABEND U0203. */

/* ---------------------------------------------------------------- */.


PRE (RO01502)

SUP (T18D697).





DESC (JES JOBNUMBER OF COMPLETED EVENT WILL BE OVERLAID.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* JES JOBNUMBER OF COMPLETED EVENT WILL BE OVERLAID. */

/* ---------------------------------------------------------------- */

/* THE JES-ID OF A SUCCESSFULLY COMPLETED JOB */

/* (ORIGINALLY SUB- MITTED FROM JOBTRAC AND NOT YET */

/* ARCHIVED) WILL BE UPDATED IF THIS JOB IS */

/* RE-SUBMITTED FROM THE JES OUTPUT SPOOL AND DOES */

/* (STILL) INCLUDE JOBTRAC'S TRACKING STEP. */

/* ---------------------------------------------------------------- */.


PRE (RO17032)

SUP (T18D704).





DESC (SCHEDULE LOAD: ADD TEXT "ERROR=>" TO ERROR MESSAGE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCHEDULE LOAD: ADD TEXT "ERROR=>" TO ERROR MESSAGE. */

/* ---------------------------------------------------------------- */

/* ADD TEXT "ERROR=>" TO THE FOLLOWING ERROR MESSAGE */

/* WHICH MAY BE ISSUED DURING SCHEDULE LOAD: "JOB */

/* EVENTNAME ALREADY EXISTS WITH VERSION NNNNN */

/* SCHEDULE LOAD FAILED." . */

/* ---------------------------------------------------------------- */.


PRE (RO16680)

SUP (T18D705).





DESC (Data Truncated on Output Browse)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 APR 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Data Truncated on Output Browse */

/* ---------------------------------------------------------------- */

/* ---------------------------------------------------------------- */.


PRE (RO16721,RO16740)

SUP (T5U5091).





DESC (GJTRJPRG MULTIPLE ISSUES ADDRESSED)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAY 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRJPRG MULTIPLE ISSUES ADDRESSED */

/* ---------------------------------------------------------------- */

/* When you don't specify sub-parameters GEN= or DAYS= with */

/* parameter EVENT=, an error occurs. STTDAYS=, AUDDAYS=, and */

/* IPLDAYS= are not permitted on the same line with EVENT=. */

/* Additional parameterswith STTDAYS=, AUDDAYS=,and IPLDAYS= */

/* are ignored. */

/* ---------------------------------------------------------------- */.


PRE (RO14409,RO14960)

SUP (T5U5092).





DESC (NOT RE-PROCESS THE LAST ENF EVENTS DURING RECOVERY)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAY 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NOT RE-PROCESS THE LAST ENF EVENTS DURING RECOVERY */

/* ---------------------------------------------------------------- */

/* IF JOBTRAC HAS BEEN INACTIVE FOR 11 MINUTES, THE */

/* ENF CHECKPOINT RECOVERY WILL RE-PROCESS THE LAST */

/* COMPLETED EVENTS AND CAUSES THE STAGED EVENT GET */

/* STAGED AGAIN. ALSO FIX D23 ABENDS WHEN ISSUING */

/* TRCE021I MESSAGES, ERRORS SHOW IN LOGREC. THIS */

/* SITUATION WILL ONLY OCCUR WHEN JOBTRAC HAS NO ENF */

/* ACTIVITY OVER TEN MINUTES. */

/* ---------------------------------------------------------------- */.


PRE (RO15535)

SUP (TB91772).





DESC (INTERVAL JOB WITH EVENT TYPE DUMMY LOSES NODE NAME.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 MAY 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* INTERVAL JOB WITH EVENT TYPE DUMMY LOSES NODE NAME. */

/* ---------------------------------------------------------------- */

/* IF A CROSS PLATFORM EVENT (XPLAT JOB) IS DEFINED AS */

/* INTERVAL EVENT, AND IF IT'S LATER CHANGED TO A */

/* DUMMY EVENT AND THEN AFTER SOME ITERATIONS CHANGED */

/* BACK TO AN XPLAT EVENT AGAIN, THEN THE NODE NAME IS */

/* LOST. */

/* ---------------------------------------------------------------- */.


PRE (RO17235)

SUP (T18D708).





DESC (SCL WITH COND OPER=R: P/S ENTRY MAY GET WRONG OSD.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 MAY 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SCL WITH COND OPER=R: P/S ENTRY MAY GET WRONG OSD. */

/* ---------------------------------------------------------------- */

/* IF A CONDITIONAL OPERATOR "R" IS USED (REPLACE */

/* ANOTHER EVENT) AND IF PREDECESSORS AND/OR */

/* SUCCESSORS ARE ADDED, WHERE A BLANK DATE IS USED */

/* AFTER "DATE=*+/-N" ON A PREVIOUS LINE, THEN A WRONG */

/* OSD VALUE IS ASSIGNED TO THIS P/S ENTRY. */

/* ---------------------------------------------------------------- */.


PRE (RO17639)

SUP (T18D709).





DESC (MESSAGE TRAC823I MAY BE ISSUED FOR NJE REMOTE JOB.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 MAY 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE TRAC823I MAY BE ISSUED FOR NJE REMOTE JOB. */

/* ---------------------------------------------------------------- */

/* A LAST UPDATE OF THE NJE SURROGATE EVENT AT THE */

/* REMOTE SIDE (RIGHT BEFORE ITS DELETION) MAY RESULT */

/* IN THE ERROR MESSAGE TRAC823I, IF "COMPLETION */

/* PROCESSING" ALREADY DELETED THIS NJE SURROGATE */

/* RECORD BECAUSE OF ITS SUCCESSFUL COMPLETION. THIS */

/* IS A TIMING ISSUE. */

/* ---------------------------------------------------------------- */.


PRE (RO16922)

SUP (T18D694).





DESC (WRONG YEAR IS DISPLAYED IN FORECAST BATCH REPORT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 7 JUN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* WRONG YEAR IS DISPLAYED IN FORECAST BATCH REPORT */

/* ---------------------------------------------------------------- */

/* THE DATE IS DISPLAYED AS MM/DD/1000 INSTEAD OF */

/* MM/DD/2010. */

/* ---------------------------------------------------------------- */.


PRE (RO15633)

SUP (TB91774).





DESC (Support for CA MSM r3.0 Software Deployment Service)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 9 JUN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Support for CA MSM r3.0 Software Deployment Service */

/* ---------------------------------------------------------------- */

/* Applying this PTF enables CA Jobtrac to be deployed */

/* by the Software Deployment Service (SDS) of CA MSM */

/* r3.0. CA MSM r3.0 deploys CA mainframe products to */

/* your target enterprise systems. */

/* */

/* Note: Download and install CA MSM r3.0 prior to */

/* applying this PTF. */

/* */

/* For information about how to download this PTF and */

/* apply it using CA MSM, see the section Maintaining */

/* Products in chapter 5 of the CA MSM Product Guide. */

/* After you have downloaded and applied this PTF, see */

/* the section Deployments in chapter 5 of the CA MSM */

/* Product Guide. */

/* */

/* To download the CA MSM Product Guide */

/* */

/* 1. Click the Customer Support Online Documentation */

/* link. */

/* */

/* 2. Select CA Mainframe Software Manager from the */

/* Select a Product dropdown and 3.0 from the Select a */

/* Release dropdown. */

/* ---------------------------------------------------------------- */.


SUP (T5EA103).


REASON (ACTION ) DATE (10055)

COMMENT (

* NOTE *

* *

* THIS PTF IS USED TO DEFINE THE REQUIRED DDDEFS FOR THE *

* MSM SOFTWARE DEPLOYMENT SERVICE AND THE SOFTWARE *

* CONFIGURATION SERVICE. THESE ENHANCEMENTS MUST HAVE THESE*

* DDDEFS CREATED IN THE PRODUCT'S SMPE CSI. *

* *

* THE TWO ADDITIONAL LIBRARIES MUST ALSO BE ALLOCATED *

* BEFORE RELEASING THIS PTF SO THAT THE REQUIRED SMPE *

* MEMBERS IN THIS PTF ARE ADDED INTO THESE REQUIRED *

* LIBRARIES. *

* *

* YOU NEED TO COPY AND CHANGE THE FOLLOWING JCL AND SUBMIT *

* IT SO THAT WE HAVE DEFINED THE CORRECT FILES IN THE SMPE *

* CSI AND HAVE ALSO ALLOCATED THESE FILES. PLEASE ENSURE *

* THAT THE CORRECT TARGET AND DISTRIBUTION ZONES ARE USED *

* IN THE JCL SHOWN BELOW FOR YOUR CA PRODUCT. *

* *

* CHANGE PRODUCT.SMPE TO YOUR SMP/E HIGH LEVEL NODES. *

* CHANGE PRODUCT.HLQ TO YOUR PRODUCT HIGH LEVEL NODES. *

* *

* NOTE: IF CA JOBTRAC WAS INSTALLED VIA CA MSM THEN THE *

* DATASET NAME OF THE CSI WILL BE: *



Release Service Details* PRODUCT.SMPE.GLOBAL.CSI *

* INSTEAD OF: *

* PRODUCT.SMPE.SMPCSI.CSI *

* *

* *

* //JOBCARD JOB ACCOUNTING,'DDDEF ADDITION',MSGCLASS=?, *

* // CLASS=?,NOTIFY=USERNAME *

* //* *

* //DDEF EXEC PGM=GIMSMP,COND=(0,NE),REGION=0M *

* //* *

* //SMPCSI DD DISP=SHR,DSN=PRODUCT.SMPE.SMPCSI.CSI *

* //SMPLOG DD DUMMY *

* //* *

* //* *

* //SMPCNTL DD * *

* SET BDY(CAITGT). *

* UCLIN. *

* *

* /**************************************************/ *

* /* TARGET ZONE DDDEF FOR THE CA JOBTRAC PRODXML */ *

* /**************************************************/ *

* *

* ADD DDDEF(CSYTXML) *

* DA(PRODUCT.HLQ.CSYTXML) SHR *

* . *

* ADD DDDEF(ASYTXML) *

* DA(PRODUCT.HLQ.ASYTXML) SHR *

* . *

* ENDUCL. *

* *

* SET BDY(CAIDLIB). *

* UCLIN. *

* *

* /**************************************************/ *

* /* DISTRIBUTION DDDEF FOR THE CA JOBTRAC PRODXML */ *

* /**************************************************/ *

* *

* ADD DDDEF(ASYTXML) *

* DA(PRODUCT.HLQ.ASYTXML) SHR *

* . *

* ENDUCL. *

* *

* /* *

* //ALLOCLIB EXEC PGM=IEFBR14 *

* //CSYTXML DD DSN=PRODUCT.HLQ.CSYTXML, *

* // SPACE=(CYL,(1,1,5)),DISP=(NEW,CATLG,DELETE), *

* //* STORCLASS=??????, OR *

* // UNIT=SYSDA,VOL=SER=??????, *

* // DCB=(RECFM=VB,LRECL=512,BLKSIZE=32760,DSORG=PO)

* //* *

* //ASYTXML DD DSN=PRODUCT.HLQ.ASYTXML, *

* // SPACE=(CYL,(1,1,5)),DISP=(NEW,CATLG,DELETE), *

* //* STORCLASS=??????, OR *

* // UNIT=SYSDA,VOL=SER=??????, *

* // DCB=(RECFM=VB,LRECL=512,BLKSIZE=32760,DSORG=PO)

* // *

* *

* THREE NEW ELEMENTS ARE BEING ADDED PER PRODUCT FOR THE *

* SDS (SOFTWARE DEPLOYMENT SERVICES). ONE OR MORE *

* MEMBERS FOR SCS (SOFTWARE CONFIGURATION SERVICES) WILL *

* BE DEPLOYED LATER. *

* *

* SDS PACKAGING DESCRIPTOR: PRODXML (CHDB000P) *

* SDS DEPLOYMENT DESCRIPTOR: PRODXML (CHDB000D) *

* SDS POST DEPLOYMENT DESCRIPTOR: PRODXML (CHDB000A) *

* *

* SCS SOFTWARE CONFIGURATION PRODXML (CHDB000C) *



Release Service Details* *

).





DESC (CROSS-PLATFORM: CUSN018W IF PROCESSP INCLUDES "!".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 15 JUN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CROSS-PLATFORM: CUSN018W IF PROCESSP INCLUDES "!". */

/* ---------------------------------------------------------------- */

/* IF USING THE SPECIAL PROCESS PERIODS */

/* +!EVENTNAME/@!EVENTNAME FOR CROSS PLATFORM EVENTS */

/* (OR GJTRABTR), THEN THE ADDING OF SUCH AN EVENT IS */

/* REJECTED WITH RC=8 AND WARNING MESSAGE CUSN018W */

/* FIELD CONTAINS INVALID CHARACTERS, "+!EVENTNAME". */

/* IT'S PREFIXED WITH "TRCI0005" IN CASE OF X-PLAT */

/* EVENTS. */

/* ---------------------------------------------------------------- */.


SUP (T18D712).





DESC (NO TRACWARN MSG ISSUED IF JCL ERROR AFTER CC CHECK.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 17 JUN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NO TRACWARN MSG ISSUED IF JCL ERROR AFTER CC CHECK. */

/* ---------------------------------------------------------------- */

/* IF A JOB GETS A TRACWARN MESSAGE BECAUSE OF A */

/* CONDITION CODE FAILURE, AND IF THE JOB LATER */

/* TERMINATES WITH A JCL ERROR, THEN NO TRACWARN */

/* MESSAGE IS ISSUED FOR THIS JCL ERROR, AND THE JOB */

/* IS FLAGGED WITH STATUS "CC CHECK". */

/* ---------------------------------------------------------------- */.


PRE (RO13311)

SUP (T18D707).





DESC (Dynamic calculation of Eligible Devices.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 JUN 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Dynamic calculation of Eligible Devices. */

/* ---------------------------------------------------------------- */

/* Calculate size of Eligible Device List dynamically */

/* to avoid maximum of 65535 Device slots. */

/* ---------------------------------------------------------------- */.


SUP (TF51356).





DESC (ARCHIVE TASK 0SYSARCH DOESN'T TERMINATE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 AUG 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE TASK 0SYSARCH DOESN'T TERMINATE. */

/* ---------------------------------------------------------------- */

/* When 0SYSARCH is running, Jobtrac gets the message: */

/* TRACDBRC SSCH RC=04( /048) PUTA K=0SYSARCH/ It */

/* indicates Jobtrac is looping in Update retry. */

/* ---------------------------------------------------------------- */.


PRE (RO11737)

SUP (TB91777).





DESC (THE STATUS OF A RUNNING JOB IS MARKED 'COMPLETE')

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 AUG 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* THE STATUS OF A RUNNING JOB IS MARKED 'COMPLETE' */

/* ---------------------------------------------------------------- */

/* WHEN A BATCH JOB RUNS OUTSIDE OF JOBTRAC THAT ADDS */

/* ANTOHER JOB WITH THE SAME JOBNAME THROUGH GJTRABTR, */

/* THE EVTEL COULD BE UPDATED WITH INFORMATIONS FROM */

/* THE ENF RECORDS OF THE JOB RUNNING OUTSIDE OF */

/* JOBTRAC. ALSO START DATE/TIME ARE LEFT WITH BLANKS. */

/* ---------------------------------------------------------------- */.


PRE (RO18319)

SUP (TB91775).





DESC (BATCH FORECAST JOB GOT S0C4 ABEND AT GJTRHKV+72E)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 25 AUG 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* BATCH FORECAST JOB GOT S0C4 ABEND AT GJTRHKV+72E */

/* ---------------------------------------------------------------- */

/* BECAUSE INTERNATIONAL GDATE IS NOT DD/MM/YY FORMAT */

/* OR DATEFMT=I IS NOT SPECIFIED IN SYSIN CARD. THIS */

/* PTF WILL NOT PREVENT THE S0C4 ABEND, BUT IT WILL */

/* SEND A WTO MESSAGE TO INDICATE THE CAUSE. */

/* ---------------------------------------------------------------- */.


PRE (RO02125)

SUP (TB91776).





DESC (Jobs routed to different Time Zones may be lost.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 26 AUG 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Jobs routed to different Time Zones may be lost. */

/* ---------------------------------------------------------------- */

/* Jobs routed to a different Time Zone by SYSPLEX */

/* routing may not be tracked successfully. */

/* */

/* SYMPTOMS: Event Status on box in different timezone */

/* will be incorrect. */

/* */

/* IMPACT: Medium to high. */

/* */

/* CIRCUMVENTION: Define JObtrac Primary and all */

/* Monitors in same Timezone. */

/* */

/* PRODUCTS AFFECTED: Jobtrac 11.0 */

/* ---------------------------------------------------------------- */.


PRE (RO21669)

SUP (TF51354).





DESC (EMAIL FEATURE/O-DEP REMOVAL: TRAC051E ISSUED TWICE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 AUG 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* EMAIL FEATURE/O-DEP REMOVAL: TRAC051E ISSUED TWICE. */

/* ---------------------------------------------------------------- */

/* THE EMAIL FEATURE WILL ISSUE MESSAGE TRAC051E */

/* TWICE, IF A JOB TERMINATES WITH A "CONDITION CODE" */

/* FAILURE AND IF THE OPTION "RESTAGECC=NO" IS USED IN */

/* MEMBER JOBTRANN: 1) ONCE AT JOB TERMINATION TIME */

/* ("MAXCC"), AND 2) A SECOND TIME WHEN THE O-DEP IS */

/* REMOVED (ON SED PANEL). */

/* ---------------------------------------------------------------- */.


PRE (RO18323)

SUP (T18D714).





DESC (NEW OPTION WEEKENDHOL= TO MARK WEEKENDS AS HOLIDAY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 31 AUG 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NEW OPTION WEEKENDHOL= TO MARK WEEKENDS AS HOLIDAY. */

/* ---------------------------------------------------------------- */

/* NEW OPTION "WEEKENDHOL=NO/SAT/SUN/SATSUN" TO DEFINE */

/* WEEKENDS AS HOLIDAYS, SINCE SATURDAY AND SUNDAY ARE */

/* NO WORKDAYS PER DEFAULT, BUT ALSO NOT CONSIDERED */

/* HOLIDAYS. */

/* ---------------------------------------------------------------- */.


PRE (RO15633,RO21692)

SUP (T18D715).





DESC (FORECAST RUN: NO INDICATION, IF ALLEVENTS WAS USED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 21 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* FORECAST RUN: NO INDICATION, IF ALLEVENTS WAS USED. */

/* ---------------------------------------------------------------- */

/* THE SCHEDULE LOAD OUTPUT DOESN'T INCLUDE ANY */

/* INDICATION, IF THE OPTION "ALLEVENTS" WAS USED FOR */

/* THE FORECAST RUN. BY THE WAY: "ALLEVENTS" MEANS: */

/* IGNORE ALL PROCESS PERIODS. */

/* ---------------------------------------------------------------- */.


PRE (RO18557)

SUP (T18D716).





DESC (TRACX26 OPTION FOR RESTART)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 22 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACX26 OPTION FOR RESTART */

/* ---------------------------------------------------------------- */

/* When a user performs a RESTART command or R line */

/* command in CA Jobtrac's ISPF panels, the TRACX26 */

/* security exit is called indicating that the use is */

/* going to UPDATE the event record. Some clients */

/* would like to allow operator's that do not have */

/* authority to update an event, to be able to restart */

/* that event. Currently the update call for RESTART */

/* is the same as a call for any other update of the */

/* event and cannot be distinguished. this change adds */

/* a field immediately following the "security object" */

/* code to indicate the special function of restart. */

/* If this field contains a character R, then this */

/* call is for a restart. To utilize this change */

/* requires the client to modify their TRACX26 exit. */

/* Clients that do not wish to use this new indicator */

/* do not need to change their existing TRACX26 exit. */

/* */

/* This PTF includes new Sample TRACX26 exits that */

/* document the new parameter and how it may be used. */

/* */

/* After this fix is applied customers may copy the */

/* CAIPROC(CHDSAMP) member to another dataset, make */

/* the changes documented in the member, provide a */

/* valid JOBCARD, and submit it to create a new CA */

/* Jobtrac sample JCL library. Customers who do not */

/* wish to change their TRACX26 exit, do not need to */

/* extract the SAMPJCL from the PAX file and do not */

/* need to take any additional action after applying */

/* this PTF. */

/* */

/* SYMPTOMS: The TRACX26 exit cannot distinguish an */

/* update for an event restart from any other update */

/* of an event. This requires a user to have update */

/* authority to restart a job. */

/* */

/* IMPACT: A user must have update access to be able */

/* to restart a job. */

/* */

/* CIRCUMVENTION: None. */

/* */


/* ---------------------------------------------------------------- */.


PRE (RO16724,QO90099,RO06824,RO01917,RO14444,QO87951,

RO15693,RO07317,RO14409,QO93977,QO89757,RO09969,

RO01403,RO14433)

SUP (T4N1252).





DESC (STATUS DISPLAY: LARGE RECORD COUNTS ARE TRUNCATED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* STATUS DISPLAY: LARGE RECORD COUNTS ARE TRUNCATED. */

/* ---------------------------------------------------------------- */

/* JOBTRAC'S STATUS DISPLAY HAS ONLY ROOM FOR 6-DIGIT */

/* RECORD COUNTS, THAT IS LARGER RECORD COUNTS (OVER */

/* ONE MILLION) WILL BE TRUNCATED TO THE LEFT. */

/* ---------------------------------------------------------------- */.


PRE (RO22582,RO15711,RO15183)

SUP (T18D699).





DESC (MH-DEP ASSIGNED IF "HOLIDAY ACTION TIME" IS IN USE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 23 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MH-DEP ASSIGNED IF "HOLIDAY ACTION TIME" IS IN USE. */

/* ---------------------------------------------------------------- */

/* EVENT WILL GET MH-DEP, IF TARGET TIME IS GREATER */

/* THAN HOLIDAY ACTION TIME (SEE GLOBAL OPTIONS), BUT */

/* THE COMPARISON SHOULD BE DONE WITH THE START TIME */

/* (AS IN R35). MESSAGE "NOT SCHEDULED MM/DD IS NOT A */

/* HOLIDAY FOR LOC NNN." DOESN'T INCLUDE THE CORRECT */

/* VALUES FOR DATE AND LOCATION. ALSO CORRECTS S0C4 */

/* ABEND IN MOD GJTRCMD AT SHUTDOWN TIME. */

/* ---------------------------------------------------------------- */.


PRE (RO22533)

SUP (T18D719).





DESC (ISPF: ABEND S0C4 IF LEAVING AFTER STATUS AND FSWAP.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 24 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF: ABEND S0C4 IF LEAVING AFTER STATUS AND FSWAP. */

/* ---------------------------------------------------------------- */

/* LEAVING JOBTRAC'S ISPF INTERFACE (PF3 OR END) AFTER */

/* ENTERING THE CMDS STATUS AND "FSWAP FT" ("FT" AS */

/* FORECAST TOKEN) IN THIS ORDER WILL RESULT IN ABEND */

/* S0C4 OF THE ISPF INTERFACE. */

/* ---------------------------------------------------------------- */.


PRE (RO09948,RO22603)

SUP (T18D713).





DESC (MESSAGE 'TRACFAIL' POSSIBLE DURING AMR PROCESSING.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 27 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MESSAGE 'TRACFAIL' POSSIBLE DURING AMR PROCESSING. */

/* ---------------------------------------------------------------- */

/* IN RARE SITUATIONS (DURING PROCESSING OF AN AMR */

/* ENTRY), THE MESSAGE *TRACFAIL - JOBTRAC? DD CARD */

/* NOT FOUND IN TIOT OR TOKEN GIVEN INVALID CAN BE */

/* ISSUED. NEVERTHELESS, THE AMR ENTRY WILL BE */

/* PROCESSED PROPERLY. A "BACK" OR VINIT W/ */

/* PARM='ONLY=GJTRVMXT' IS NEEDED FOR THIS CHANGE. */

/* ---------------------------------------------------------------- */.


PRE (RO21854)

SUP (T18D732).





DESC (SED: ARCHIVED P/S ENTRY AS (NOT SCHD) AFTER UPDATE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SED: ARCHIVED P/S ENTRY AS (NOT SCHD) AFTER UPDATE. */

/* --------------------------------------------------- */

/* 1) IF A PREDECESSOR IS COMPLETE AND ALREADY ARCHIVED (OPTION */

/* ALLC OF THE ARCHIVE UTILITY), AND IF NOW AN UPDATE IS MADE TO */

/* THE P/S LIST OF THE SUCCESSOR EVENT (SED(ETAIL) PANEL), THEN */

/* THIS PREDECESSOR IS REINSTATED AND FLAGGED AS "(NOT SCHD)". */

/* 2) ALSO, IF A PREDECESSOR ENTRY IS ADDED (SED(ETAIL) PANEL) */

/* FOR A NON-EXISTING PREDECESSOR ("THE PREDECESSOR DOESN'T EXIST */

/* ON THE CHECKPOINT"), THEN THE MISSING PANEL DOESN'T DISPLAY */

/* THIS "MISSING" PREDECESSOR EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO22582)

SUP (T18D701).





DESC (Z/OS 1.10: MOD GJTRCPER IS ON OPDATA TRACKING LIST.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Z/OS 1.10: MOD GJTRCPER IS ON OPDATA TRACKING LIST. */

/* ---------------------------------------------------------------- */

/* SINCE Z/OS 1.10 JOBTRAC'S MODULE GJTRCPER APPEARS */

/* ON THE "OPERATOR INFORMATION" DISPLAY ("OPDATA */

/* TRACKING" LIST), BECAUSE THE LSPACE MACRO (IN */

/* MODULE GJTRCPER) DOESN'T INCLUDE EAV (EXTENDED */

/* ADDRESS VOLUME) SUPPORT. */

/* ---------------------------------------------------------------- */.


PRE (RO22603)

SUP (T18D706).





DESC (Presubmission JCL Errors not reported to XPLAT)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 30 SEP 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* Presubmission JCL Errors not reported to XPLAT */

/* ---------------------------------------------------------------- */

/* Pre-submission jcl errors (TRAC014E RC=nn) do not */

/* report the status back to the requesting manager */

/* (AUTOSYS or JMO) ). distributed platform. The */

/* JOBINITU, JOBTERMU and/or JOBFAILU may contain */

/* invalid Dates. */

/* */

/* SYMPTOMS: Event Status on XPLAT box will be */

/* incorrect. */

/* */

/* IMPACT: Medium. */

/* */

/* CIRCUMVENTION: Verify that all events sent from */

/* XPLAT are defined in the Jobtrac MF are defined in */

/* the appropriate PDS Libraries. */

/* */

/* PRODUCTS AFFECTED: Jobtrac 11.0 */

/* ---------------------------------------------------------------- */.


PRE (RO17131,RO12212)

SUP (TF51357).





DESC (MSG TRAC310I ISSUED REPEATEDLY, R-DEP NEVER POSTED.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 1 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* MSG TRAC310I ISSUED REPEATEDLY, R-DEP NEVER POSTED. */

/* ---------------------------------------------------------------- */

/* IF THERE ARE MORE THAN 200 JOBS WITH SAME NAME ON */

/* JES SPOOL AND IF THIS JOB IS USED FOR A RESOURCE */

/* DEFINITION (MEMBER RESOURCE, KEYWORD */

/* (NO)JOB=EVENT), THEN THE MESSAGE TRAC310I WILL BE */

/* ISSUED (ONCE PER SECOND) AND THE R DEPENDENCY WILL */

/* NEVER BE SATISFIED. */

/* ---------------------------------------------------------------- */.


PRE (RO15508)

SUP (T18D727).





DESC (ARCHIVE WITH T= PARAMETER NOT POSSIBLE FOR PRIOR YEARS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ARCHIVE WITH T= PARAMETER NOT POSSIBLE FOR PRIOR */

/* YEARS */

/* ---------------------------------------------------------------- */

/* When executing the archive utility, GJTRJARC, it is */

/* not possible to specify the year in the time range */

/* value(s) of the T= parameter. The archive utility */

/* currently assumes the current year for the dates */

/* specified in the T= parameter. Therefore, it is not */

/* possible to perform an archive for a time range */

/* where the from date is in a previous year. */

/* */

/* SYMPTOMS: Event information for prior years can not */

/* be selected by the archive utility because the */

/* utility does not allow specification of the year in */

/* the T= parameter and the current year is assumed. */

/* Event information can not be listed or archived for */

/* prior years if the T= parameter is specified. */

/* */

/* IMPACT: Event information can not be listed or */

/* archived for prior years if the T= parameter is */

/* specified. */

/* */

/* CIRCUMVENTION: None. */

/* ---------------------------------------------------------------- */.


PRE (RO15633,RO15693)

SUP (T5EA106).





DESC (TOP-LINE CMDS AMR/WTOS DON'T PRINT ALL AMR ENTRIES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 8 OCT 2010 */

/* HYPER: NO */

/* */

/* */

/* ---------------------------------------------------------------- */

/* TOP-LINE CMDS AMR/WTOS DON'T PRINT ALL AMR ENTRIES. */

/* ---------------------------------------------------------------- */

/* TOP-LINE CMD AMR (OR WTOS) DOESN'T LIST "DUPLICATE" */

/* AMR ENTRIES, WHEREAS TABLE SERVICE "JTS" OPTION #2 */

/* (FOR AMR) DOES LIST THEM. THIS DIFFERENCE MAY LEAD */

/* TO SOME CONFUSION. */

/* ---------------------------------------------------------------- */.


PRE (RO22582)

SUP (T18D735).





DESC (TRACAUTH: MESSAGE UNAUTHORIZED FOR "ADD EVENT,L=N".)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 11 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* TRACAUTH: MESSAGE UNAUTHORIZED FOR "ADD EVENT,L=N". */

/* ---------------------------------------------------------------- */

/* IF TABLE TRACAUTH DOESN'T ALLOW TO ADD AN EVENT FOR */

/* THE DEFAULT LOCATION FROM THE PROFILE, THEN THE ADD */

/* COMMAND WITH "L=N" IS ALSO REJECTED FOR A LOCATION */

/* "N", WHICH ALLOWS TO ADD AN EVENT. */

/* ---------------------------------------------------------------- */.


PRE (RO22661)

SUP (T18D718).





DESC (AUTOSCHD: CONDITION CODE CHECKING DONE PER DEFAULT.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 12 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTOSCHD: CONDITION CODE CHECKING DONE PER DEFAULT. */

/* ---------------------------------------------------------------- */

/* IF AN AUTO-SCHED JOB GETS A CONDITION CODE GREATER */

/* THAN ZERO FOR ONE OF ITS STEPS, IT WILL BE FLAGGED */

/* WITH A J DEPENDENCY (AND RESTAGED FOR RESTART, IF */

/* RESTAGECC=Y IS IN USE). */

/* ---------------------------------------------------------------- */.


PRE (RO17574)

SUP (T18D726).





DESC (SED PANEL: "D=*" DOESN'T LIST RESTAGED AUTOSCHD JOB)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 13 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* SED PANEL: "D=*" DOESN'T LIST RESTAGED AUTOSCHD JOB */

/* ---------------------------------------------------------------- */

/* IF AN AUTOSCHD JOB IS RESTAGED (FOR EXAMPLE BECAUSE */

/* OF A CONDITION CODE FAILURE AND OPTION */

/* RESTAGECC=YES), THEN IT'S NOT FLAGGED WITH "AUTO" */

/* IN COLUMN "DEP CODES" OF THE SED PANEL. */

/* ---------------------------------------------------------------- */.


PRE (RO23197)

SUP (T18D733).





DESC (NJE EVENT: "EXL" ELEMENT IS CREATED AT REMOTE NODE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 18 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE EVENT: "EXL" ELEMENT IS CREATED AT REMOTE NODE. */

/* ---------------------------------------------------------------- */

/* AN EXL ENTRY ("MUTUAL EXCLUSION DEPENDENCY") IS */

/* CREATED FOR AN NJE JOB AT THE REMOTE SIDE, BUT */

/* "EXCLUSION RULES" WILL ONLY WORK AT LOCAL NODES (IN */

/* CASE OF NJE EVENTS), NOT AT REMOTE NODES. */

/* ---------------------------------------------------------------- */.


PRE (RO23255)

SUP (T18D731).





DESC (AUTOSCHD: DEFAULT CONDITION CODE CHECKING NOT OKAY.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 19 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* AUTOSCHD: DEFAULT CONDITION CODE CHECKING NOT OKAY. */

/* ---------------------------------------------------------------- */

/* IF AN AUTOSCHD JOB GETS A CONDCODE GREATER THAN */

/* ZERO IN ONE OF ITS STEPS, IT SHOULD BE FLAGGED AS */

/* COMPLETED UNSUCCESSFULLY (CC CHECK). THIS SHOULD BE */

/* DONE PER DEFAULT; IT ONLY WORKS IN CASE OF */

/* "COND=0". */

/* ---------------------------------------------------------------- */.


PRE (RO23511)

SUP (T18D734).





DESC (CONVERSION: LOOP POSSIBLE IF "PRE-CONVERSION" DONE.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 20 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* CONVERSION: LOOP POSSIBLE IF "PRE-CONVERSION" DONE. */

/* ---------------------------------------------------------------- */

/* IF "PRE-CONVERSION" IS DONE (JOB CONVERT FROM */

/* SAMPJCL RUNS WITH PARM */

/* PARM='DBID=DBID,HISTBEFORE=YYDDD'), THEN A LOOP */

/* WILL OCCUR, IF THE SAME JOBTRAC/TOKEN IS USED FOR */

/* R11 AND FOR R35 AND IF THE JT/INTERNALS FROM R35 */

/* ARE STILL ACTIVE ON THAT SYSTEM, WHERE THE CONVERT */

/* JOB RUNS, FOR EXAMPLE BECAUSE JT35 IS RUNNING */

/* THERE. */

/* ---------------------------------------------------------------- */.


PRE (RO14598)

SUP (T18D729).





DESC (GETS "WAIT EXEC" IF CANCELED WHILE WAITING FOR DSN.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 28 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GETS "WAIT EXEC" IF CANCELED WHILE WAITING FOR DSN. */

/* ---------------------------------------------------------------- */

/* IF A JOB IS CANCELED WHILE "WAITING FOR DATA SETS", */

/* AND IF THIS JOB HASN'T SPENT ANY CPU TIME YET, THEN */

/* THIS JOB WILL BE MARKED WITH STATUS "WAIT EXEC" */

/* INSTEAD OF "ABENDED=S/222", EVEN THOUGH OPTION */

/* "REQUE$EJ" DEFAULTS TO "NO" (AND WASN'T SPECIFIED). */

/* ---------------------------------------------------------------- */.


PRE (RO13311)

SUP (T18D736).





DESC (GJTRABTR: S878 ABEND POSSIBLE IF CALLED MANY TIMES.)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 29 OCT 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: S878 ABEND POSSIBLE IF CALLED MANY TIMES. */

/* ---------------------------------------------------------------- */

/* THE "END" STATEMENT IS NEEDED TO CLEANUP RESOURCES, */

/* SHOULD MOD GJTRABTR BE CALLED MULTIPLE TIMES FROM */

/* ANOTHER PROGRAM. ACTUALLY, MODS GJTRHKV, GJTRVAUT, */

/* TRACX26 WON'T BE DELETED. */

/* ---------------------------------------------------------------- */.


PRE (RO22582)

SUP (T18D717).





DESC (ROUTED TO DIFF TIME ZONE: CAN REMAIN IN EXEC STATUS)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 2 NOV 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ROUTED TO DIFF TIME ZONE: CAN REMAIN IN EXEC STATUS */

/* ---------------------------------------------------------------- */

/* JOBS ROUTED TO A DIFFERENT TIME ZONE BY SYSPLEX */

/* ROUTING MAY NOT BE TRACKED SUCCESSFULLY. */

/* ---------------------------------------------------------------- */.


PRE (RO23557)

SUP (T18D737).





DESC (NJE: JCL ERROR FLAGGED AS USER ABEND U0737 OR U0761)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 NOV 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* NJE: JCL ERROR FLAGGED AS USER ABEND U0737 OR U0761 */

/* ---------------------------------------------------------------- */

/* IF AN NJE JOB GETS A JCL ERROR (AT THE REMOTE */

/* SIDE), THEN IT'S FLAGGED WITH USER ABEND U0737 (JCL */

/* ERROR DURING EXECUTION, AS FOR EXAMPLE FOR "DSN NOT */

/* FOUND") OR U0761 (JCL SYNTAX ERROR BEFORE */

/* EXECUTION) AT THE LOCAL SIDE. ALSO, GJTRABTR'S */

/* QUERY FUNCTION DISPLAYS INCORRECT VALUES FOR THE */

/* FIELDS NJES AND NODE FOR NJE JOBS (AT THE REMOTE */

/* SIDE). */

/* ---------------------------------------------------------------- */.


PRE (RO17299,RO05321,RO23932)

SUP (T18D730).





DESC (ISPF: K=H LISTS ALL EVENTS W/"WAITING DEPENDENCIES")

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 5 NOV 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* ISPF: K=H LISTS ALL EVENTS W/"WAITING DEPENDENCIES" */

/* ---------------------------------------------------------------- */

/* SELECTION COMMAND "K=H" SHOULD (ONLY) LIST ALL */

/* EVENTS WITH NO INCOMPLETE PREDECESSORS, BUT ALL */

/* EVENTS WITH "AWAITING DEPENDENCIES" ARE LISTED. */

/* ---------------------------------------------------------------- */.


PRE (RO23270)

SUP (T18D740).





DESC (GJTRABTR: COMMAND MAY BE DONE FOR THE WRONG JOBTRAC)

/* ---------------------------------------------------------------- */


/* RELEASE: 11.0 */

/* DATE: 10 NOV 2010 */

/* HYPER: NO */

/* */


/* ---------------------------------------------------------------- */

/* GJTRABTR: COMMAND MAY BE DONE FOR THE WRONG JOBTRAC */

/* --------------------------------------------------- */

/* IF MULTIPLE JOBTRAC'S ARE RUNNING ON THE SAME SYSTEM, THEN: */

/* 1) UTILITY GJTRABTR CAN EXECUTE THE COMMAND(S) FOR A DIFFERENT */

/* JOBTRAC AS IT'S INDICATED VIA DD STMT "//JOBTRACX DD DUMMY". */

/* 2) MESSAGES CUUS086E AND CUUS088E INCLUDE INCORRECT VALUES. */

/* 3) THE GET FUNCTION CAN DISPLAY A SUPERFLUOUS "T-DEP" FLAG. */

/* ---------------------------------------------------------------- */.


PRE (RO24108)

SUP (T18D739).





DESC (IMOD REMAINS IN EXECUTING STATUS AFTER JT/RE-CYCLE.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 NOV 2010

HYPER: NO

STARTRAK PROBLEM PRODUCT NAME: JOBTRC PROBLEM NUMBER: 1349

---------------------------------------------------------------------

IMOD REMAINS IN EXECUTING STATUS AFTER JT/RE-CYCLE.

---------------------------------------------------------------------

IF JOBTRAC IS RE-CYCLED, WHILE AN IMOD IS CURRENTLY RUNNING

(THAT IS IN EXECUTING STATUS), THEN AFTER RESTART OF JOBTRAC

IT WILL REMAIN IN THIS STATUS FOREVER. ALSO, IMOD NAME AND

VERSION ARE MISSING FOR MESSAGE TRAC849I DURING RESTART.

-------------------------------------------------------------------*/.


PRE (RO24108)

SUP (T18D741).





DESC (CONVERTED JOB IS MARKED AS COMPLETE DESPITE FAILURE)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 NOV 2010

HYPER: NO


---------------------------------------------------------------------

CONVERTED JOB IS MARKED AS COMPLETE DESPITE FAILURE

---------------------------------------------------------------------

IF A JOB CONVERTED FROM R35 GETS A "JCL ERROR" OR IS FLUSHED

BECAUSE OF "UNABLE TO ALLOCATE NNN UNIT(S)" AND REPLY OF "C",

IT'S MARKED AS COMPLETED SUCCESSFULLY DESPITE THE FAILURE.

THIS ONLY OCCURS FOR JOBS BEING CONVERTED FROM R35.

-------------------------------------------------------------------*/.


PRE (RO14264)

SUP (T18D738).





DESC (Genlevel changed to AM01..)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 9 DEC 2010

HYPER: NO


---------------------------------------------------------------------

Genlevel changed to AM01..

---------------------------------------------------------------------

Genlevel changed to AM01.

Note: The following APARs published contain ++HOLD instructions:

Aggregate Maint APAR - PTF

Jobtrac r11 AM01: RO15711 - TF51351

RO16699 - T18D693

RO19292 - T5EA103

Service Pack APAR - PTF

Jobtrac r11 SP05: RO15633 - T4N1238

RO15166 - T18D683

RO14409 - T5EA094

Jobtrac r11 SP04: RO07318 - TF51342

RO07180 - T4N1214

RO06718 - T4N1200

RO06413 - T5DR043

RO06335 - T18D601

Jobtrac r11 SP03: RO02424 - TF51331

RO02366 - T5DR037

RO02218 - T5U5085

RO02125 - T4N1181

Jobtrac r11 SP02: none

Jobtrac r11 SP01: QO92344 - TF51310

-------------------------------------------------------------------*/.



RO16740,RO16753,RO16810,RO16860,RO16922,RO17032,

RO17066,RO17131,RO17156,RO17235,RO17287,RO17299,

RO17340,RO17574,RO17639,RO17844,RO18311,RO18319,

RO18323,RO18557,RO18586,RO19162,RO19292,RO19419,

RO19515,RO19760,RO21441,RO21669,RO21692,RO21711,

RO21837,RO21854,RO22533,RO22582,RO22603,RO22620,

RO22661,RO22728,RO22809,RO22811,RO22922,RO22964,

RO23063,RO23157,RO23197,RO23255,RO23270,RO23511,

RO23557,RO23622,RO23868,RO23932,RO24015,RO24108,

RO24110,RO24238,RO24833,RO24852)

SUP (TF51360).


. Note: The following APARs published contain ++HOLD instructions.

. Please verify that all ++HOLD processes have been completed.

. Aggregate Maint APAR - PTF

. Jobtrac r11 AM01: RO15711 - TF51351

. RO16699 - T18D693

. RO19292 - T5EA103

. Service Pack APAR - PTF

. Jobtrac r11 SP05: RO15633 - T4N1238

. RO15166 - T18D683

. RO14409 - T5EA094

. Jobtrac r11 SP04: RO07318 - TF51342

. RO07180 - T4N1214

. RO06718 - T4N1200

. RO06413 - T5DR043

. RO06335 - T18D601

. Jobtrac r11 SP03: RO02424 - TF51331

. RO02366 - T5DR037

. RO02218 - T5U5085

. RO02125 - T4N1181



Release Service Details. Jobtrac r11 SP02: none

. Jobtrac r11 SP01: QO92344 - TF51310

).




Release Service Details11.0 RO27371 RO27371 M.C.S. ENTRIES = ++PTF (RO27371)

DESC (GJTRJARC: CLEAN DONE FOR ARCHIVED (HISTORY) EVENTS.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 28 FEB 2011

HYPER: NO


---------------------------------------------------------------------

GJTRJARC: CLEAN DONE FOR ARCHIVED (HISTORY) EVENTS.

---------------------------------------------------------------------

OPTION CLEAN OF UTILITY GJTRJARC REMOVES ORPHANED RECORDS ALSO

FOR ARCHIVED EVENTS (HISTORY) AS OPPOSED TO RELEASE R35. WITH

THIS CHANGE, IT WILL DO THE CLEAN ONLY FOR NON-ARCHIVED RECORDS

(AS FOR RELEASE 3.5), AND A NEW OPTION (NAMED "CLEANHST") WILL

NOW DO THE CLEAN FOR ARCHIVED RECORDS.

-------------------------------------------------------------------*/.


PRE (RO23063,RO15633)

SUP (T18D742).





DESC (XPLATRERUN=LOCAL + TRAC014E/RC=01/07: EVENT HANGING)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 1 MAR 2011

HYPER: NO


---------------------------------------------------------------------

XPLATRERUN=LOCAL + TRAC014E/RC=01/07: EVENT HANGING

---------------------------------------------------------------------

IF OPTION XPLATRERUN=LOCAL IS USED AND IF A JOB GETS A JCL ERROR

(MESSAGE TRAC014E WITH RC=01 OR 07), THEN THIS JOB REMAINS WITH

STATUS "ABENDED=JCL" FOREVER (AND NEEDS TO BE DELETED).

IF OPTION RESTAGEJCLERR=YES IS USED, IT WON'T GET RESTAGED.

-------------------------------------------------------------------*/.


PRE (RO22922)

SUP (T18D744).





DESC (CHANGE TO INCREASE SCAN INTERVAL W/ MODIFY COMMAND.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 2 MAR 2011

HYPER: NO


---------------------------------------------------------------------

CHANGE TO INCREASE SCAN INTERVAL W/ MODIFY COMMAND.

---------------------------------------------------------------------

THE DEFAULT SCAN INTERVAL (TO CHECK FOR NEW JOBS TO SUBMIT)

IS HALF A SECOND IN R11 AND IT CANNOT BE CHANGED AS IN R35.

IF JOBTRAC IS IDLE FOR A LONG TIME, IT MAY BE ADVISABLE TO

INCREASE THE SCAN INTERVAL, AND THIS CHANGE REINSTATES THE

MODIFY COMMAND TO CHANGE THIS SCAN INTERVAL.

-------------------------------------------------------------------*/.


PRE (RO13311,RO14270,RO27418)

SUP (T18D750).





DESC (RESTAGECC=NO:O-DEP CAN'T BE REMOVED FROM FAILED SCL)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 9 MAR 2011

HYPER: NO


---------------------------------------------------------------------

RESTAGECC=NO:O-DEP CAN'T BE REMOVED FROM FAILED SCL

---------------------------------------------------------------------

IF OPTION RESTAGECC=NO IS IN EFFECT AND IF A SCHEDULE LOAD

(SCL) FAILS, THEN IT GETS AN O-DEP, BUT AS A MATTER OF FACT

THIS O-DEP CANNOT BE REMOVED ON THE SED PANEL.

-------------------------------------------------------------------*/.


PRE (RO21837)

SUP (T18D751).





DESC (IMOD RECONNECT/MESSAGE TRAC849I: VERSION INCORRECT.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 11 MAR 2011

HYPER: NO


---------------------------------------------------------------------

IMOD RECONNECT/MESSAGE TRAC849I: VERSION INCORRECT.

---------------------------------------------------------------------

IF AN IMOD WAS SCHEDULED FROM JOBTRAC, AND IF IT FAILED WHILE

JOBTRAC WAS DOWN, THEN MSG TRAC849I IS ISSUED WHEN JOBTRAC

IS RESTARTED, BUT THE VERSION OF THIS MESSAGE IS INCORRECT.

---------------------------------------------------------------------

PROBLEM RESOLUTION:

Apply the following PTF to the system.

Recycle CA-Jobtrac.

***NOTE*** Retain the printed output for reference.

-------------------------------------------------------------------*/.


PRE (RO24833)

SUP (T18D755).





DESC (GJTRJARC: EVENT TYPE "JOB" CAN BE LISTED FOR IMODS.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 11 MAR 2011

HYPER: NO


---------------------------------------------------------------------

GJTRJARC: EVENT TYPE "JOB" CAN BE LISTED FOR IMODS.

---------------------------------------------------------------------

IF AN IMOD IS SCHEDULED VIA SCL MEMBER, AND IF IT'S ARCHIVED

AFTER (SUCCESSFUL) COMPLETION, THEN UTILITY GJTRJARC DISPLAYS

AN EVENT TYPE OF "JOB" FOR THIS IMOD ON ITS REPORT.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO15633)

SUP (T18D756).





DESC (GJTRABTR: INCORRECT YEAR, IF CROSSING YEAR BOUNDARY)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 14 MAR 2011

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: INCORRECT YEAR, IF CROSSING YEAR BOUNDARY

---------------------------------------------------------------------

IF THE PARAMETER DATE(MMDD) IS USED FOR FUNCTIONS ADD AND MODIFY (OR

POST) AND SPECIFIES A DATE WITHIN THE NEXT YEAR, THEN IT WON'T BE

CALCULATED CORRECTLY, IF THE YEAR CONTAINS TWO SIGNIFICANT DIGITS AS

2011. THIS APPLIES TO BATCH UTILITY GJTRABTR AND THE USE OF @JOBTRAC

IN REXX/IMODS AND CAN ALSO AFFECT NJE JOBS AND CROSS-PLATFORM JOBS.

IT CAN ALSO AFFECT THE CREATION OF P/S RELATIONSHIPS, IF PREDECESSOR

AND SUCCESSOR HAVE OSD'S BELONGING TO DIFFERENT YEARS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle utility GJTRABTR.


-------------------------------------------------------------------*/.


PRE (RO24108,RO24238)

SUP (T18D745).





DESC (ONLY P-DEP CANNOT BE REMOVED IN BATCH OR WITH IMOD.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 14 MAR 2011

HYPER: NO


---------------------------------------------------------------------

ONLY P-DEP CANNOT BE REMOVED IN BATCH OR WITH IMOD.

---------------------------------------------------------------------

IF THE P DEPENDENCY WILL BE REMOVED WITH THE BATCH UTILITY

GJTRABTR (OR AN IMOD), THEN THE P-DEP WILL BE REINSTATED

WHEN THIS EVENT CAN BE SUBMITTED. REMOVING OF PREDECESSOR

EVENTS HOWEVER DOES WORK AND CLEARS THE P-DEP FLAG.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun batch utility GJTRABTR.


-------------------------------------------------------------------*/.


PRE (RO27938)

SUP (T18D752).





DESC (Staging Table rows are orphaned if exceptions used.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 15 MAR 2011

HYPER: NO


---------------------------------------------------------------------

Staging Table rows are orphaned if exceptions used.

---------------------------------------------------------------------

Subordinate Staging Tables contain orphaned rows if exceptions used

in SCL (X in col 69). This affects CCD, CPM, EDT, EML, FLW, PST,

ARG, and RSC Staging Tables.

SYMPTOMS:

The Jobtrac ISPF STATUS command will show entries in the STG Tables.

IMPACT:

Medium.

CIRCUMVENTION:

None.

PRODUCTS AFFECTED:

Jobtrac 11.0

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Reload any resident modules, or re-IPL if necessary.


-------------------------------------------------------------------*/.


PRE (RO16922)

SUP (TF51361).





DESC (GJTREZJW: P/S SECTION MISSING FOR ARCHIVED PRD/SUC.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 18 MAR 2011

HYPER: NO


---------------------------------------------------------------------

GJTREZJW: P/S SECTION MISSING FOR ARCHIVED PRD/SUC.

---------------------------------------------------------------------

THE DISPLAY SCHEDULE JOB REPORT GJTREZJW DOESN'T INCLUDE THE

SEGMENT WITH PREDECESSORS AND/OR SUCCESSORS FOR ARCHIVED EVENTS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun the EZT report GJTREZJW.


-------------------------------------------------------------------*/.


PRE (RO17287)

SUP (T18D758).





DESC (XPLAT HAS DUPLICATE JOBINITU FOR SCHEDULE LOAD)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 22 MAR 2011

HYPER: NO


---------------------------------------------------------------------

XPLAT HAS DUPLICATE JOBINITU FOR SCHEDULE LOAD

---------------------------------------------------------------------

When a cross-platform schedule load is successfully performed, a

duplicate JOBINITU ENF event is created.

SYMPTOMS:

When a cross-platform schedule load is successfully performed, a

duplicate JOBINITU ENF event is created. A successful schedule load

should result in the creation of an ENF JOBINITU and JOBTERMU event.

The problem causes two JOBINITU events to be created followed by one

JOBTERMU event.

IMPACT:

This currently causes AutoSys re-synchronization problems if AutoSys

is re-cycled and a cross-platform schedule load to Jobtrac is

performed. The job in Autosys stays in RUNNING status indefinitely.

This problem only occurs if the first job AutoSys sends to Jobtrac

is a schedule load.

CIRCUMVENTION:

None.

---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


PRE (RO21441)

SUP (T5EA107).





DESC (HANG-UP OF JOBTRAC POSSIBLE DURING SHUTDOWN PROCESS)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 23 MAR 2011

HYPER: NO


---------------------------------------------------------------------

HANG-UP OF JOBTRAC POSSIBLE DURING SHUTDOWN PROCESS

---------------------------------------------------------------------

IF A LARGE SCHEDULE LOAD IS STILL RUNNING WHILE JOBTRAC IS

STOPPED, THEN JOBTRAC MAY HANG IN THE SHUTDOWN PROCESS AND

NEEDS TO BE CANCELED. AFTER RE-CYCLE, THE MESSAGE TRAC084E

INDICATES, THAT THE SCHEDULE LOAD OUTPUT WASN'T CAPTURED.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO17844,RO28287)

SUP (T18D754).





DESC (S13C/U203 ABEND WHEN DIAG TRAPS(IGVINITGETMAIN) SET)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 MAR 2011

HYPER: NO


---------------------------------------------------------------------

S13C/U203 ABEND WHEN DIAG TRAPS(IGVINITGETMAIN) SET

---------------------------------------------------------------------

IBM's SYS1.PARMLIB(DIAGxx) TRAP IGVINITGETMAIN sets getmained storage

x'FF', requiring programs to clear the storage before using it. When

this is set, an ABEND occurs in CA Jobtrac's GJTRSSCH subtask.

SYMPTOMS:

CA Jobtrac fails with S13C/U203 abends.

IMPACT:

CA Jobtrac cannot be run when TRAPS(IGVINITGETMAIN) is set.

CIRCUMVENTION:

Do not set TRAPS(IGVINITGETMAIN) or TRAPS(IGVINITFREEMAIN) in your DI

member of SYS1.PARMLIB. The DIAG settings can be changed using the

'SET DIAG=xx' MVS command. Does not require an IPL.

PRODUCTS AFFECTED:

Jobtrac R11.0

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Stop and restart CA Jobtrac started task. .


-------------------------------------------------------------------*/.


PRE (RO28379)

SUP (T4N1259).





DESC (TRAC899I: GARBAGE AS TOKENS AFTER SWITCHING PRIMARY)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 30 MAR 2011

HYPER: NO


---------------------------------------------------------------------

TRAC899I: GARBAGE AS TOKENS AFTER SWITCHING PRIMARY

---------------------------------------------------------------------

IF SWITCHING THE PRIMARY JOBTRAC AND IF THE NJE FEATURE IS ACTIVE,

THEN THE LIST OF NJE/TOKENS FOR MSG TRAC899I WILL INCLUDE GARBAGE

LIKE "TRAC899I - NJE PROCESSING ACTIVE FOR TOKENS: ROR:DD=".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO27470)

SUP (T18D763).





DESC (P-DEP FLAG NOT REMOVED, IF DELETE ON MISSING PANEL.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 11 APR 2011

HYPER: NO


---------------------------------------------------------------------

P-DEP FLAG NOT REMOVED, IF DELETE ON MISSING PANEL.

---------------------------------------------------------------------

THE P DEPENDENCY WON'T BE REMOVED, IF THE PREDECESSOR EVENT DOESN'T

EXIST AND IF THE PREDECESSOR ENTRY IS DELETED ON THE MISSING PANEL.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO07060)

SUP (T18D760).





DESC (JOBTRAC/EMAIL: BUSGRP FIELD MAY BE PADDED WITH N/Y.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 20 APR 2011

HYPER: NO


---------------------------------------------------------------------

JOBTRAC/EMAIL: BUSGRP FIELD MAY BE PADDED WITH N/Y.

---------------------------------------------------------------------

THE NAME OF THE BUSINESS GROUP IN AN EMAIL SENT BY JOBTRAC MAY

BE PADDED WITH CHARACTERS N OR Y AT POSITIONS 9 OR 10.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO16753)

SUP (T18D764).





DESC (GJTRABTR: DUMP ISN'T LISTING SUPPLEMENTAL ELEMENTS.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 5 MAY 2011

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: DUMP ISN'T LISTING SUPPLEMENTAL ELEMENTS.

---------------------------------------------------------------------

IN R35, ALL "EXTENSION" RECORDS OF AN EVENT ARE PRINTED FOR THE

DUMP COMMAND OF THE GJTRABTR UTILITY, BUT IN CASE OF R11, ALL

SUPPLEMENTAL RECORDS ARE MISSING.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun batch utility GJTRABTR.


-------------------------------------------------------------------*/.


PRE (RO27953)

SUP (T18D766).





DESC (Ignore SMFID Processing for NJE jobs.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 12 MAY 2011

HYPER: NO


---------------------------------------------------------------------

Ignore SMFID Processing for NJE jobs.

---------------------------------------------------------------------

If the same SMFID is used for multiple LPARs used in NJE

processing, Jobtrac does not track the jobs successfully.

This will add a new Keyword (JTGROUP) to JOBTRAxx. The

value specified for JTGROUP= may be 4 bytes in length

and MUST be unique for individual Jobtrac Groups:

JOBTRACX - PRIMARY -|

JOBTRACX - MONITOR -|______ JTGROUP=SYSD

JOBTRACX - MONITOR -|

JOBTRACX - MONITOR -|

JOBTRACY - PRIMARY -|

JOBTRACY - MONITOR -|______ JTGROUP=SYSA

JOBTRACY - MONITOR -|

JOBTRACY - MONITOR -|

JOBTRACZ - PRIMARY -|

JOBTRACZ - MONITOR -|______ JTGROUP=SYSN

JOBTRACZ - MONITOR -|

JOBTRACZ - MONITOR -|

Note- This APAR requires a Jobtrac BACK or an IPL.

SYMPTOMS:

The jobs remain in NAWT Status.

IMPACT:

Medium.

CIRCUMVENTION:

None.

---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


PRE (RO15469,RO21854)

SUP (T5U5095).

++HOLD(T5U5095) SYSTEM REASON(ACTION) FMID(CHDB000) COMMENT(

. If you have the same SMFID defined for multipls LPARs and

. you wish to utilize NJE between them:

. Add a JTGROUP= keyword to the your.node.JT.PPOPTION(JOBTRAxx)

. member you are using for both Jobtracs.

. The value specified for JTGROUP= may be 4 bytes in length

. and MUST be unique for individual Jobtrac Groups:

. JOBTRACX - PRIMARY -|

. JOBTRACX - MONITOR -|______ JTGROUP=SYSD

. JOBTRACX - MONITOR -|

. JOBTRACX - MONITOR -|

. JOBTRACY - PRIMARY -|

. JOBTRACY - MONITOR -|______ JTGROUP=SYSA

. JOBTRACY - MONITOR -|

. JOBTRACY - MONITOR -|

. JOBTRACZ - PRIMARY -|

. JOBTRACZ - MONITOR -|______ JTGROUP=SYSN

. JOBTRACZ - MONITOR -|



Release Service Details

. JOBTRACZ - MONITOR -|

.Note: Change all JOBTRAxx members within the Jobtrac Group.

.Note: This APAR requires a Jobtrac BACK or an IPL.

. If your SMFIDs are unique for each LPAR:

. The JTGROUP= keyword is not needed.

).





DESC (JCL ERROR: "SYSTEM ID" OF PRIMARY JOBTRAC DISPLAYED)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 31 MAY 2011

HYPER: NO


---------------------------------------------------------------------

JCL ERROR: "SYSTEM ID" OF PRIMARY JOBTRAC DISPLAYED

---------------------------------------------------------------------

IF A JOB IS SUBMITTED TO A MONITOR SYSTEM AND GETS A JCL ERROR BEFORE

EXECUTION (AS FOR EXAMPLE FOR A SYNTAX JCL ERROR), THEN THE EXECUTION

PANEL SHOWS THE "SYSTEM ID" OF THE PRIMARY SYSTEM INSTEAD AS THE ONE

OF THE MONITOR SYSTEM. THIS "SYSTEM ID" WILL ALSO BE DISPLAYED ON THE

REPORTS FOR GJTRJARC AND GJTREZJS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO23868)

SUP (T18D762).





DESC (GJTRABTR: ABEND S0C7, WHEN USING OPTION "CC(MC,N)".)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 2 JUN 2011

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: ABEND S0C7, WHEN USING OPTION "CC(MC,N)".

---------------------------------------------------------------------

RUNNING UTILITY GJTRABTR WITH PARAMETER "CC(MC,N)" FOR EXAMPLE FOR

THE QUERY COMMAND WILL RESULT IN ABEND S0C7 IN MODULE GJTRCUUS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac/Rerun batch utility.


-------------------------------------------------------------------*/.


PRE (RO29996)

SUP (T18D767).





DESC (GJTRABTR: USE DEFAULT TOKEN, IF NO "DD DUMMY" STMT.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 7 JUN 2011

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: USE DEFAULT TOKEN, IF NO "DD DUMMY" STMT.

---------------------------------------------------------------------

PTF RO24238 MADE THE SPECIAL DD STATEMENT "//JOBTRACX DD DUMMY"

REQUIRED FOR UTILITY GJTRABTR. IN JOBTRAC RELEASE 3.5, THE DEFAULT

TOKEN CORRESPONDED TO THE FIRST JICA ACTIVATED AFTER IPL.

APPLYING THIS PTF, JOBTRAC RELEASE 11.0 WILL NOW WORK THE SAME

PROVIDED THIS SPECIAL DD STATEMENT "//JOBTRACX DD DUMMY" DOESN'T

EXIST. IF SPECIFIED AND JOBTRAC (NOR VINIT) WASN'T STARTED, THEN

AN ERROR MESSAGE CUUS08XX IS ISSUED INDICATING WE COULD NOT

ESTABLISH THE DEFAULT TOKEN.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac or rerun batch utility.


-------------------------------------------------------------------*/.


PRE (RO31136)

SUP (T18D768).


* NOTE *

* *

* If you don't want to use the default Token when running *

* GJTRABTR (or REXX/Imods), then please provide the Token *

* "x" via the special DD statement "//JOBTRACx DD DUMMY". *

* *





DESC (JTS: AMR ENTRY FOR "TRACWARN" MESSAGE NOT PROCESSED)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 9 JUN 2011

HYPER: NO


---------------------------------------------------------------------

JTS: AMR ENTRY FOR "TRACWARN" MESSAGE NOT PROCESSED

---------------------------------------------------------------------

THE TRACWARN MESSAGE IS ISSUED FOR THE JOBTRAC/STC SINCE R11, SO THAT

THE "CREATE EVENT:" OF AN AMR ENTRY (JTS) FOR THIS MESSAGE HAS TO BE

THE JOBTRAC/STC. THIS CHANGE MAKES IT WORK THE SAME AS FOR R35.

NOTE: THIS APAR REQUIRES A JOBTRAC BACK OR AN IPL.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac with a BACK.


-------------------------------------------------------------------*/.


PRE (QO89730)

SUP (T18D765).





DESC (GJTRJARC: ONLY THE LAST SPECIFIED LOCATION IS USED.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 10 JUN 2011

HYPER: NO


---------------------------------------------------------------------

GJTRJARC: ONLY THE LAST SPECIFIED LOCATION IS USED.

---------------------------------------------------------------------

IF MULTIPLE LOCATIONS "L=NNN" ARE SPECIFIED FOR BATCH UTILITY

GJTRJARC (OR TASK 0ARCHIVE), THEN ONLY THE EVENTS OF THE LAST

SPECIFIED LOCATION ARE ARCHIVED. WITH THIS CHANGE, THE USE OF

MULTIPLE LOCATIONS IS REJECTED (MESSAGE "DUPLICATED PARM").

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac or rerun batch utility.


-------------------------------------------------------------------*/.


PRE (RO27371)

SUP (T18D769).





DESC (SCL LOAD: S0C7, IF VALUE FOR @TODAY= ISN'T NUMERIC.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 10 JUN 2011

HYPER: NO


---------------------------------------------------------------------

SCL LOAD: S0C7, IF VALUE FOR @TODAY= ISN'T NUMERIC.

---------------------------------------------------------------------

ABEND S0C7 OCCURS IN MODULE GJTRVSCH, IF THE VALUE FOR KEYWORD

"@TODAY=" ISN'T NUMERIC, FOR EXAMPLE: "@TODAY=&:JDAY3".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac; rerun schedule load.


-------------------------------------------------------------------*/.


PRE (RO22620)

SUP (T18D770).





DESC (NO "O-DEP" IS ASSIGNED, IF THE "ARCHIVE" TASK FAILS)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 15 JUN 2011

HYPER: NO


---------------------------------------------------------------------

NO "O-DEP" IS ASSIGNED, IF THE "ARCHIVE" TASK FAILS

---------------------------------------------------------------------

DESPITE A FAILURE FOR THE ARCHIVE TASK 0ARCHIVE OR 0JOBARCH,

IT'S MARKED AS COMPLETE. IN R35, AN "O-DEP" WAS ASSIGNED.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO28536)

SUP (T18D771).





DESC (GJTRABTR: OPTION CC(JC) SKIPS COMPLETION CODE JCLCN)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 28 JUN 2011

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: OPTION CC(JC) SKIPS COMPLETION CODE JCLCN

---------------------------------------------------------------------

OPTION "CC(JC)" OF UTILITY GJTRABTR DOES CURRENTLY ONLY SELECT

EVENTS WITH COMPLETION CODE "JCLER", IT IGNORES TYPE "JCLCN".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac; rerun utility GJTRABTR.


-------------------------------------------------------------------*/.


PRE (RO31290)

SUP (T18D772).





DESC (Jobtrac got S0C4 at GJTRDCOM+654 during shutdown)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 5 JUL 2011

HYPER: NO


---------------------------------------------------------------------

Jobtrac got S0C4 at GJTRDCOM+654 during shutdown

---------------------------------------------------------------------

The address of work area for GJTRDCOM left in the trace

table, but the work area has already been freed.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac must be recycled.

-------------------------------------------------------------------*/.


PRE (RO23622)

SUP (TB91783).





DESC (TABLE INFORMATIONS IN STATUS COMMAND ARE MISSING)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 6 JUL 2011

HYPER: NO


---------------------------------------------------------------------

TABLE INFORMATIONS IN STATUS COMMAND ARE MISSING

---------------------------------------------------------------------

AFTER DATACOM IS UPGRADED FROM R11 TO R12.

BECAUSE THE SIZE OF DRT SYSTEM TABLE IS 4 BYTES

LONGER.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac does not have to be recycled,

User must log off from ISPF of Jobtrac.

-------------------------------------------------------------------*/.


PRE (RO22811)

SUP (TB91781).





DESC (The failed job with O-dep can not be restaged.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 7 JUL 2011

HYPER: NO


---------------------------------------------------------------------

The failed job with O-dep can not be restaged.

---------------------------------------------------------------------

R line command does not create the restaged job with

J-dep as R3.5.

This only occurs if RESTAGExxxxx set to NO.

---------------------------------------------------------------------

PROBLEM RESOLUTION:



-------------------------------------------------------------------*/.


PRE (RO24110)

SUP (TB91782).





DESC (JOBTRAC TERMINATED AFTER MESSAGE TRCE016E.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 11 JUL 2011

HYPER: NO


---------------------------------------------------------------------

JOBTRAC TERMINATED AFTER MESSAGE TRCE016E.

---------------------------------------------------------------------

JOBTRAC ABENDED WITH U0203 AFTER GOT TWO MESSAGES:

TRACDBRC CEXL RC=08(14/048) GET9 K= JOBNAME

TRCE016E - EVENT RECORD NOT FOUND FOR UPDATE

BECAUSE CHECKPOINT ENTRY IN MESSAGE TRACDBRC WAS

DELETED PREMATURELY.

---------------------------------------------------------------------

PROBLEM RESOLUTION:



-------------------------------------------------------------------*/.


PRE (RO21711)

SUP (TB91778).





DESC (JOBTRAC GOT S0C4 ABEND WHEN REFRESHEXCL ISSUED.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 12 JUL 2011

HYPER: NO


---------------------------------------------------------------------

JOBTRAC GOT S0C4 ABEND WHEN REFRESHEXCL ISSUED.

---------------------------------------------------------------------

JOBTRAC ABENDED WITH S0C4 AT MODULE GJTRCEXL+200

RIGHT AFTER THE FOLLOWING MESSAGE:

TRAC1068I REFRESHEXCL command processing complete

BECAUSE JOB EXCLUSION BLOCK WAS CHANGED WHEN ABENDING

TASK WAS READING IT.

---------------------------------------------------------------------

PROBLEM RESOLUTION:



-------------------------------------------------------------------*/.


PRE (RO15322,RO24015)

SUP (TB91780).





DESC (GENLEVEL CHANGED TO AM02.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 18 JUL 2011

HYPER: NO


---------------------------------------------------------------------

GENLEVEL CHANGED TO AM02.

---------------------------------------------------------------------

NOTE: THE FOLLOWING APARS PUBLISHED CONTAIN ++HOLD INSTRUCTIONS:

AGGREGATE MAINT APAR - PTF

JOBTRAC R11 AM02: RO31290 - T18D768

RO30375 - T5U5095

RO25240 - TF51360

JOBTRAC R11 AM01: RO19292 - T5EA103

RO16699 - T18D693

RO15711 - TF51351

JOBTRAC R11 SP05: RO15633 - T4N1238

RO15166 - T18D683

RO14409 - T5EA094

JOBTRAC R11 SP04: RO07318 - TF51342

RO07180 - T4N1214

RO06718 - T4N1200

RO06413 - T5DR043

RO06335 - T18D601

JOBTRAC R11 SP03: RO02424 - TF51331

RO02366 - T5DR037

RO02218 - T5U5085

RO02125 - T4N1181

JOBTRAC R11 SP02: NONE

JOBTRAC R11 SP01: QO92344 - TF51310

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.



RO31601,RO31460,RO31457,RO31401,RO31290,RO31136,

RO31053,RO30375,RO29996,RO29378,RO29042,RO28569,

RO28536,RO28379,RO28287,RO28172,RO28022,RO27953,

RO27938,RO27900,RO27898,RO27779,RO27470,RO27418,

RO27371,RO25240)

SUP (T18D774).


. NOTE: THE FOLLOWING APARS PUBLISHED CONTAIN ++HOLD INSTRUCTIONS.

. PLEASE VERIFY THAT ALL ++HOLD PROCESSES HAVE BEEN COMPLETED.

. AGGREGATE MAINT APAR - PTF

. JOBTRAC R11 AM02: RO31290 - T18D768

. RO30375 - T5U5095

. RO25240 - TF51360

. JOBTRAC R11 AM01: RO19292 - T5EA103

. RO16699 - T18D693

. RO15711 - TF51351

. SERVICE PACK APAR - PTF

. JOBTRAC R11 SP05: RO15633 - T4N1238

. RO15166 - T18D683

. RO14409 - T5EA094

. JOBTRAC R11 SP04: RO07318 - TF51342

. RO07180 - T4N1214

. RO06718 - T4N1200

. RO06413 - T5DR043

. RO06335 - T18D601

. JOBTRAC R11 SP03: RO02424 - TF51331



Release Service Details. RO02366 - T5DR037

. RO02218 - T5U5085

. RO02125 - T4N1181

. JOBTRAC R11 SP02: NONE

. JOBTRAC R11 SP01: QO92344 - TF51310

).





DESC (S0C1/4 POSSIBLE IN GJTRVWTR AFTER $HASP708 W/RC=06.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 SEP 2011

HYPER: NO


---------------------------------------------------------------------

S0C1/4 POSSIBLE IN GJTRVWTR AFTER $HASP708 W/RC=06.

---------------------------------------------------------------------

IF SYSOUT CAPTURE IS DONE FOR A CORRUPTED SPOOL FILE, THEN ERROR

MESSAGE $HASP708 WITH "RC=06 I/O ERROR READING DATA BUFFER" WILL

OCCUR. AND SOONER OR LATER, AN ABEND S0C4 (OR S0C1) WILL HAPPEN

IN MODULE GJTRVWTR (AND JOBTRAC TERMINATES ABNORMALLY).

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO28379)

SUP (T18D773).





DESC (THE COMPLETED R-AUTOSCHD JOB IS ADDED BACK)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 SEP 2011

HYPER: NO


---------------------------------------------------------------------

THE COMPLETED R-AUTOSCHD JOB IS ADDED BACK

---------------------------------------------------------------------

TO CHECKPOINT DURING JOBTRAC ENF RECOVERY PROCESS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:



-------------------------------------------------------------------*/.


PRE (RO32675)

SUP (TB91785).





DESC (JOB REMAINS IN STATUS "ABENDED/EX" AFTER $HASP310.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 9 SEP 2011

HYPER: NO


---------------------------------------------------------------------

JOB REMAINS IN STATUS "ABENDED/EX" AFTER $HASP310.

---------------------------------------------------------------------

IF A JOB GETS AN ABEND PRIOR TO MESSAGE "$HASP310 JOBNAME

TERMINATED AT END OF MEMORY", SO THAT NO ENF/JOBTERM RECORD

IS CUT, THEN THE JOB REMAINS IN STATUS ABEND/EX.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO31053)

SUP (T18D780).





DESC (NJE EXECUTION DETAIL PANEL: INCORRECT ORIG. VERSION)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 16 SEP 2011

HYPER: NO


---------------------------------------------------------------------

NJE EXECUTION DETAIL PANEL: INCORRECT ORIG. VERSION

---------------------------------------------------------------------

IF AN EVENT ALREADY EXISTS (AT THE REMOTE NODE) WITH NAME, OSD AND

VERSION OF THE NEWLY SUBMITTED NJE JOB, THEN THE NJE JOB GETS A

VERSION OF "100" (OR HIGHER) AT THE REMOTE NODE. HOWEVER, THE NJE

EXECUTION DETAIL PANEL DISPLAYS THIS VERSION AS "ORIGINAL VERSION".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Re-LOGON to TSO/ISPF.


-------------------------------------------------------------------*/.


PRE (RO06702)

SUP (T18D776).





DESC (TRAC822I/RC=2012: NJE JOB REMAINS IN STATUS "NAWT".)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 16 SEP 2011

HYPER: NO


---------------------------------------------------------------------

TRAC822I/RC=2012: NJE JOB REMAINS IN STATUS "NAWT".

---------------------------------------------------------------------

AN NJE JOB WILL REMAIN IN STATUS "NAWT", IF IT GETS A CONDITION

CODE GREATER THAN 255, AND FOLLOWING MESSAGES WILL BE ISSUED:

TRAC822I - IMOD ERROR (****************,2012,0171) FOR EVENT OSD

TRAC847E - UNABLE TO POST ORIGINATING NODE NODE .

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac (at remote node).


-------------------------------------------------------------------*/.


PRE (RO27898)

SUP (T18D781).





DESC (NJE JOBS NEVER SHOW A STATUS OF EXECUTING ("NEXE").)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 20 SEP 2011

HYPER: NO


---------------------------------------------------------------------

NJE JOBS NEVER SHOW A STATUS OF EXECUTING ("NEXE").

---------------------------------------------------------------------

WHEN NJE JOBS ARE RUNNING AT REMOTE NODE, THEY'RE STILL LISTED

WITH STATUS "NAWT" ("NJE - AWAITING EXECUTION") AT THE LOCAL NODE.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO02343)

SUP (T18D775).

++HOLD(RO35203) SYSTEM REASON(DOC) FMID(CHDB000) COMMENT(

* NOTE about Documentation Update for the *

* Planning and Implementation Guide *

* in Appendix A "NJE Support" *

* in subsection "ISPF Interface" *

* *

* - NJE jobs in Awaiting Execution or Executing status *

* have a Scheduled Event Display status of *

* N-status-nodename,SYS=ssss where status is either *

* NAWT for Awaiting Execution or NEXE for Executing, *

* nodename is the remote JES node name and *

* ssss is the submitting system's SMF system ID. *

* *





DESC (IVP JOB "JOBT@#$J": NO DATA ABOUT IEFACTRT SNAPPED.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 21 SEP 2011

HYPER: NO


---------------------------------------------------------------------

IVP JOB "JOBT@#$J": NO DATA ABOUT IEFACTRT SNAPPED.

---------------------------------------------------------------------

THE IVP JOB "JOBT@#$J" DOESN'T DUMP ANY INFORMATION ABOUT THE SMF

EXIT POINT "IEFACTRT", BUT IT EXISTS AGAIN SINCE PTF RO07180 AND

HANDLES THE FEATURE "STEP SYSOUT FOOTERS".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun IVP job "JOBT@#$J".


-------------------------------------------------------------------*/.


SUP (T18D777).





DESC (MONITOR/JT MAY FLAG INTERVAL JOB AS "ABENDED/PURGE")

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 SEP 2011

HYPER: NO


---------------------------------------------------------------------

MONITOR/JT MAY FLAG INTERVAL JOB AS "ABENDED/PURGE"

---------------------------------------------------------------------

THIS IS A VERY TIMING DEPENDENT PROBLEM. IT ONLY OCCURS

FOR INTERVAL JOBS, IF THERE'S AT LEAST ONE JOBTRAC/MONITOR:

THE NEW ITERATION OF AN INTERVAL JOB GETS FLAGGED AS PURGED

ON A JOBTRAC/MONITOR SYSTEM (SEE TRACWARN MESSAGE), WHILE

IT'S WAITING FOR SUBMIT TIME; IF THE PREVIOUS RUN OF THIS

INTERVAL JOB IS PURGED FROM THE JES SPOOL AT THIS TIME.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (QO90615)

SUP (T18D785).





DESC (EASYTRIEVE: DELETED EVENTS AREN'T LISTED ON REPORTS)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 19 OCT 2011

HYPER: NO


---------------------------------------------------------------------

EASYTRIEVE: DELETED EVENTS AREN'T LISTED ON REPORTS

---------------------------------------------------------------------

DELETED EVENTS WON'T BE LISTED ON EASYTRIEVE REPORTS, AS FOR

EXAMPLE ON THE LIST SCHEDULE JOB REPORT GJTREZJS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO29042)

SUP (T18D790).





DESC (AUTOSCHD WITH ACTION CODE T REJECTED WITH TRAC024C.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 OCT 2011

HYPER: NO


---------------------------------------------------------------------

AUTOSCHD WITH ACTION CODE T REJECTED WITH TRAC024C.

---------------------------------------------------------------------

AN AUTOSCHD JOB WITH ACTION CODE "T" CURRENTLY CONNECTS TO THE

FIRST JOB WITH THIS NAME ON THE CHECKPOINT. IF IT HAS FURTHER

DEPENDENCIES BESIDES THE J-DEP, IT WILL BE REJECTED WITH MSG

TRAC024C - JOBNAME HAS IMPROPER DEPENDENCIES, SUBMISSION DENIED.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO34690)

SUP (T18D786).





DESC (MSG "TRACDBRC CEXL RC=08(14/048) GET9 K=TEVENT VVV")

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 31 OCT 2011

HYPER: NO


---------------------------------------------------------------------

MSG "TRACDBRC CEXL RC=08(14/048) GET9 K=TEVENT VVV"

---------------------------------------------------------------------

IF THE SAME ENF EVENT CHDUJV2S IS PROCESSED AGAIN (FOR EXAMPLE

DURING "ENF RECOVERY"), THE JES-ID IS ADDED TO THE EXL ELEMENT

AGAIN RESULTING IN MESSAGE TRACDBRC WITH "RC=08(14/048) GET9".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO32675)

SUP (T18D791).





DESC (AUTO-SCHED JOB: JES HOLD COMMAND $HJNN MAY FAIL.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 2 NOV 2011

HYPER: NO


---------------------------------------------------------------------

AUTO-SCHED JOB: JES HOLD COMMAND $HJNN MAY FAIL.

---------------------------------------------------------------------

IF AN AUTOSCHD JOB CAN'T BE HELD INTERNALLY, WE ISSUE THE HOLD CMD

$HJNN. HOWEVER, IF THE JES-ID HAS MORE THAN 5 DIGITS, THEN THE HOLD

CMD FAILS, SINCE WE TRUNCATE THE JOB NUMBER TO 5 DIGITS AT THE LEFT.


---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


PRE (RO30375,RO27470)

SUP (T18D778).





DESC (JOB NOT TRACKED AND MSG CONVERTER POST ERROR ISSUED)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 3 NOV 2011

HYPER: NO


---------------------------------------------------------------------

JOB NOT TRACKED AND MSG CONVERTER POST ERROR ISSUED

---------------------------------------------------------------------

IF MANY JOBS ARE SUBMITTED AT THE SAME TIME, IT CAN HAPPEN THAT

ONE OF THESE JOBS WON'T BE TRACKED BY JOBTRAC, IF SUBMITTED BY

JOBTRAC. AN SVCDUMP (DUMP TITLE=GJTRUJV2 CONVERTER POST ERROR)

IS GENERATED IN THIS CASE, AND FOLLOWING MESSAGES WILL BE SEEN:

THREAD WAS STALL PURGED AND CA-JOBTRAC - CONVERTER POST ERROR.


---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


PRE (RO37185)

SUP (T18D788).





DESC (GENERIC RESOURCE: MORE JOBS EXECUTING THAN ALLOWED.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 10 NOV 2011

HYPER: NO


---------------------------------------------------------------------

GENERIC RESOURCE: MORE JOBS EXECUTING THAN ALLOWED.

---------------------------------------------------------------------

IF A GENERIC RESOURCE IS ASSIGNED TO A DUMMY EVENT, THEN THE

(IN-CORE) RESOURCE COUNT IS DECREASED AT COMPLETION TIME, EVEN

THOUGH IT WASN'T INCREASED AT SUBMISSION TIME. HENCE, IT CAN

HAPPEN, THAT MORE JOBS CONNECTED TO THIS GENERIC RESOURCE ARE

EXECUTING AT THE SAME TIME THAN DEFINED (IN MBR JOBTRANN).

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO37185,RO27779)

SUP (T18D787).





DESC (SCL LOAD: LOOP POSSIBLE FOR PROCESSP="@!EVENTNAME".)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 10 NOV 2011

HYPER: NO


---------------------------------------------------------------------

SCL LOAD: LOOP POSSIBLE FOR PROCESSP="@!EVENTNAME".

---------------------------------------------------------------------

IF AN EVENT EXISTS IN ABENDED STATUS ON THE CHECKPOINT AND IF THIS

EVENT IS USED FOR THE (SPECIAL) PROCESS PERIOD "@!EVENTNAME", THEN

A LOOP WILL OCCUR IN MODULE GJTRVSCH DURING SCHEDULE (SCL) LOAD.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac; rerun batch SCL load.


-------------------------------------------------------------------*/.


PRE (RO31460)

SUP (T18D779).





DESC (MSG TRAC320E IF LOADING MANY CPM FLOWS AT SAME TIME)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 15 NOV 2011

HYPER: NO


---------------------------------------------------------------------

MSG TRAC320E IF LOADING MANY CPM FLOWS AT SAME TIME

---------------------------------------------------------------------

IF SEVERAL SCLS USING CPM FLOWS ARE SCHEDULED SIMULTANEOUSLY,

MESSAGE "TRAC320E ERROR FINDING CPM JOB IN CHECKPOINT - ..."

WILL BE ISSUED FOR THE ONE OR OTHER CPM FLOW, AND THE CAIENF

EVENT(S) TO MONITOR THE CPM FLOW(S) WON'T BE CREATED.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO16922)

SUP (T18D789).





DESC (JOBTRAC MAY ABEND AFTER ARCH REPLY TO WTOR TRAC096A)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 17 NOV 2011

HYPER: NO


---------------------------------------------------------------------

JOBTRAC MAY ABEND AFTER ARCH REPLY TO WTOR TRAC096A

---------------------------------------------------------------------

IF THE CAPTURE FILE IS EXACTLY FULL, THE NEXT SYSOUT CAPTURE

WILL GENERATE WTOR TRAC096A. IF "ARCH" IS REPLIED, THEN ERROR

MESSAGES TRAC074E, TRAC075W, TRAC588C AND TRAC079C WILL BE

ISSUED AND FINALLY JOBTRAC ABENDS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO34683,RO08913)

SUP (T18D792).





DESC (HISTORICAL-RUN-TIME in CPM flow job shows zero.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 7 DEC 2011

HYPER: NO


---------------------------------------------------------------------

HISTORICAL-RUN-TIME in CPM flow job shows zero.

---------------------------------------------------------------------

When displaying the flow job through TSO CPM clist,

The value of historical-run-time shows '000000'.

This apar also initializes the getmained storage

to avoid CPMSRVR from abending with S0C4 after DIAGxx

has been turned on.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac and CPM does not need to be recycled.

The old flow in CPM will not be impacted.

-------------------------------------------------------------------*/.


SUP (TB91784).





DESC (GJTRABTR: YEAR VALUE OF START TIME IS NOT ADJUSTED.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 DEC 2011

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: YEAR VALUE OF START TIME IS NOT ADJUSTED.

---------------------------------------------------------------------

IF AN EVENT IS SCHEDULED WITH A START TIME POINTING TO NEXT YEAR,

THEN CHANGING IT WITH UTILITY GJTRABTR WILL KEEP THE NEXT YEAR FOR

THE START TIME, THAT IS IT WON'T CHANGE IT TO THIS YEAR.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun the batch utility GJTRABTR.


-------------------------------------------------------------------*/.


PRE (RO32156)

SUP (T18D794).





DESC (STATUS: GARBAGE FOR % DATA USED IF CAPTURE FILE NEW)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 13 DEC 2011

HYPER: NO


---------------------------------------------------------------------

STATUS: GARBAGE FOR % DATA USED IF CAPTURE FILE NEW

---------------------------------------------------------------------

IF THE CAPTURE FILE IS NEWLY INITIALIZED (EMPTY), THEN THE STATUS

PANEL WILL DISPLAY GARBAGE FOR THE USED PERCENTAGE OF DATA BLOCKS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


PRE (RO32858)

SUP (T18D793).





DESC (ABEND U0305 POSSIBLE FOR THE PURGE UTILITY GJTRJPRG)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 10 JAN 2012

HYPER: NO


---------------------------------------------------------------------

ABEND U0305 POSSIBLE FOR THE PURGE UTILITY GJTRJPRG

---------------------------------------------------------------------

IF THERE ARE VERY MANY EVENTS WITH THE SAME NAME, THEN THE

PURGE UTILITY GJTRJPRG WILL TERMINATE WITH ABEND U0305 AFTER

MSG "GJTRJPRG; CANDIDATE KEY NOT FOUND - ABNORMAL END U0305".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun the batch utility GJTRJPRG.


-------------------------------------------------------------------*/.


PRE (RO18311)

SUP (T18D795).





DESC (Incorrect year is at the version date of predecessor)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 11 JAN 2012

HYPER: NO


---------------------------------------------------------------------

Incorrect year is at the version date of predecessor

---------------------------------------------------------------------

Using the ADD panel, an event is added with a

predecessor and the target date crossing year-end

boundary, an incorrect year is showing at version

date of the predecessor.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac does not need to be recycled,

but TSO user must log off from Jobtrac.

-------------------------------------------------------------------*/.


PRE (RO32475)

SUP (TB91786).





DESC (NON-JOBTRAC JOB GETS MESSAGE "CONVERTER POST ERROR")

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 FEB 2012

HYPER: NO


---------------------------------------------------------------------

NON-JOBTRAC JOB GETS MESSAGE "CONVERTER POST ERROR"

---------------------------------------------------------------------

IF VERY MANY JOBS (RUNNING OUTSIDE OF JOBTRAC) ARE SUBMITTED

AT THE SAME TIME, THEN IT CAN HAPPEN THAT MESSAGE "TRAC024C

- JOBNAME HAS IMPROPER DEPENDENCIES, SUBMISSION DENIED." IS

ISSUED FOR ONE OF THESE JOBS AND AN SVCDUMP (W/ DUMP TITLE=

GJTRUJV2 CONVERTER POST ERROR) IS GENERATED, ALTHOUGH THIS

JOB DOESN'T RUN UNDER CONTROL OF JOBTRAC.


---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


PRE (RO37285)

SUP (T18D801).

++HOLD(RO42344) SYSTEM REASON(RESTART) FMID(CHDB000) COMMENT(

. Note: JOBTRAC needs to be stopped with "BACK" ("F jt,BACK")

. or an IPL is required after installation of this PTF.

).





DESC (GJTRABTR: RC MESSAGE: VERSION NO. MAY BE INCORRECT.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 FEB 2012

HYPER: NO


---------------------------------------------------------------------

GJTRABTR: RC MESSAGE: VERSION NO. MAY BE INCORRECT.

---------------------------------------------------------------------

IF THE SAME JOB IS ADDED MULTIPLE TIMES (WITH UTILITY GJTRABTR

OR WITH AN IMOD), AND IF THE EXECUTION OF THIS JOB FAILS, SO

THAT IT WILL BE RE-STAGED, THEN THE VERSION NUMBER DISPLAYED ON

THE "RC" MESSAGE IS "00002" FOR ALL JOBS WITH A VERSION GT 2.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-GSS or rerun GJTRABTR job.


-------------------------------------------------------------------*/.


PRE (RO38613)

SUP (T18D802).





DESC (SED PANEL: END DATE/TIME IS INCORRECT FOR NJE JOBS.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 1 MAR 2012

HYPER: NO


---------------------------------------------------------------------

SED PANEL: END DATE/TIME IS INCORRECT FOR NJE JOBS.

---------------------------------------------------------------------

AFTER COMPLETION OF AN NJE JOB AT THE REMOTE NODE, ITS STATUS

WILL BE UPDATED AT THE LOCAL NODE, BUT THE END DATE/TIME ON

THE SED PANELS (DISPLAY AND DETAIL) IS INCORRECT. PROBLEM WILL

ALSO OCCUR WITH UTILITY GJTRABTR, IF THE START D/T (STIME) IS

CHANGED TOGETHER WITH THE END D/T (ETIME) VIA POST/MOD CMD.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-GSS or rerun GJTRABTR utility.


-------------------------------------------------------------------*/.


PRE (RO42347)

SUP (T18D803).





DESC (Incorrect year is at the default version date)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 21 MAR 2012

HYPER: NO


---------------------------------------------------------------------

Incorrect year is at the default version date

---------------------------------------------------------------------

Using the ADD panel, an event is added with a

predecessor and the target date crossing-end

boundary, an incorrect year is showing at the default

version date of the predecessor or successor.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac does not need to be recycled,

but TSO user must log off from Jobtrac.

-------------------------------------------------------------------*/.


PRE (RO40674)

SUP (TB91788).





DESC (MSG TRAC187I AND DUPLICATE EVENT ISN'T LOADED TWICE)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 28 MAR 2012

HYPER: NO


---------------------------------------------------------------------

MSG TRAC187I AND DUPLICATE EVENT ISN'T LOADED TWICE

---------------------------------------------------------------------

IF THE SAME EVENT WITH THE SAME HARD-CODED VERSION EXISTS IN

DIFFERENT SCLS BEING SCHEDULED SIMULTANEOUSLY, THEN MESSAGE

TRAC176I IS ISSUED, THE DUPLICATE EVENT ISN'T LOADED TWICE,

AND BOTH SCLS ARE FLAGGED AS TERMINATED SUCCESSFULLY.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO37696)

SUP (T18D800).





DESC (NO ERROR MESSAGE GIVEN, IF FAILURE DURING RESTAGING)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 28 MAR 2012

HYPER: NO


---------------------------------------------------------------------

NO ERROR MESSAGE GIVEN, IF FAILURE DURING RESTAGING

---------------------------------------------------------------------

IF A FAILURE OCCURS WHILE RESTAGING AN ABENDED JOB, THEN IT

CAN HAPPEN, THAT NO ERROR MESSAGE IS DISPLAYED.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO37681)

SUP (T18D809).





DESC (JCLTRAC WITH "TYPRUN(JOBSCAN)" IS MISSING SOME JOBS)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 APR 2012

HYPER: NO


---------------------------------------------------------------------

JCLTRAC WITH "TYPRUN(JOBSCAN)" IS MISSING SOME JOBS

---------------------------------------------------------------------

UTILITY JCL3TRAC WITH OPTION TYPRUN(JOBSCAN) DOESN'T INCLUDE

JOBS FROM PREVIOUS OR NEXT YEAR, ONLY FROM THE CURRENT YEAR.

THIS ALSO OCCURS IN CASE OF FORECAST WITH OPTION FORECAST(T).

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun batch utility JCL3TRAC.


-------------------------------------------------------------------*/.


PRE (RO00033)

SUP (T18D799).





DESC (SCHEDULE REPORT-GJTREZJS READS EXCESSIVE I/O.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 APR 2012

HYPER: NO


---------------------------------------------------------------------

SCHEDULE REPORT-GJTREZJS READS EXCESSIVE I/O.

---------------------------------------------------------------------

SCHEDULE REPORT (GJTREZJS) READS THE ENTIRE EVT TABLE,

EVEN THE REPORT IS JUST FOR A PARTICULAR EVENT.

---------------------------------------------------------------------

PROBLEM RESOLUTION:

APPLY THE FOLLOWING PTF TO THE SYSTEM.

THE NEW CODE IS IN CAISRC(GJTREZJ1), IT MUST BE POINTED UNDER

DD PANDD IN SAMPJCL(GJTREZJS)

-------------------------------------------------------------------*/.


PRE (RO17287)

SUP (TB91790).





DESC (REMOVING AM LEVEL REFERENCE)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 APR 2012

HYPER: NO


---------------------------------------------------------------------

REMOVING AM LEVEL REFERENCE

---------------------------------------------------------------------

This PTF removes reference to Aggregate Maintenance

files (AMxx) in the various product console

messages panel displays and reports.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac does not need to be recycled.

-------------------------------------------------------------------*/.


PRE (RO38749)

SUP (TB91791).





DESC (OPT_AREA OF FORECAST/DB (FILE OPT0162) CAN RUN FULL)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 27 APR 2012

HYPER: NO


---------------------------------------------------------------------

OPT_AREA OF FORECAST/DB (FILE OPT0162) CAN RUN FULL

---------------------------------------------------------------------

IF FORECASTING IS DONE WITH A LOT OF DIFFERENT FORECAST TOKENS

AND IF LARGE JTS TABLES EXIST IN THE PRODUCTION DATABASE, THEN

FILE "OPT0162" OF THE FORECAST DATABASE WILL BECOME VERY LARGE,

SINCE EACH FORECAST TOKEN GETS ITS OWN SET OF JTS TABLES.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun the Forecast job.


-------------------------------------------------------------------*/.


PRE (RO19162)

SUP (T18D804).


. Note: Please add the following note to the description

. of the keywords for the Forecast pgm GJTRFCST:

. //* NOJTS - Don't copy JTS tables into Forecast database

).





DESC (SUPPORT INSTREAM DATA IN INSTREAM PROCEDURE.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 AUG 2012

HYPER: NO


---------------------------------------------------------------------

SUPPORT INSTREAM DATA IN INSTREAM PROCEDURE.

---------------------------------------------------------------------

PRIOR TO z/OS 1.13, IT WILL GET ERROR MESSAGE:

IEFC601I INVALID JCL STATEMENT.

---------------------------------------------------------------------

PROBLEM RESOLUTION:

APPLY THE ABOVE PTF TO THE SYSTEM.

REFRESH LLA IF NECESSARY.

-------------------------------------------------------------------*/.


SUP (TB91792).





DESC (PROF COMMAND: ERROR ISPP353 FOR HELP PANEL GJHPRF2.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 AUG 2012

HYPER: NO


---------------------------------------------------------------------

PROF COMMAND: ERROR ISPP353 FOR HELP PANEL GJHPRF2.

---------------------------------------------------------------------

ENTERING (TOP-LINE) COMMAND "PROF" (ISPF INTERFACE) AND

INVOKING HELP FOR "DEFAULT COMMAND FIELD" (PF1/OPTION 1)

RESULTS IN ISPF ERROR MESSAGE ISPP353 FOR PANEL GJHPRF2.

---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


SUP (T18D813).





DESC (GJTRSUB: A WRONG KEY WAS USED FOR AN UPDATE REQUEST)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 AUG 2012

HYPER: NO


---------------------------------------------------------------------

GJTRSUB: A WRONG KEY WAS USED FOR AN UPDATE REQUEST

---------------------------------------------------------------------

A NON-UNIQUE RECORD KEY (EVTKS) IS USED FOR AN UPDATE (PUT)

REQUEST, WHERE A UNIQUE KEY (EVTK) SHOULD HAVE BEEN USED.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO37681)

SUP (T18D820).





DESC (LINES AT BOTTOM OF PASSWORD COMMAND CAN BE OVERLAID)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 8 AUG 2012

HYPER: NO


---------------------------------------------------------------------

LINES AT BOTTOM OF PASSWORD COMMAND CAN BE OVERLAID

---------------------------------------------------------------------

ISPF INTERFACE: USING PFSHOW=ON AND OPTION "COMMAND LINE AT

BOTTOM" WILL OVERLAY SOME LINES AT THE BOTTOM OF THE PANEL

FOR THE PASSWORD COMMAND (PANEL NAME GJTRE@RP).

---------------------------------------------------------------------

PROBLEM RESOLUTION:




-------------------------------------------------------------------*/.


SUP (T18D821).





DESC (SA03 DURING SHUTDOWN, IF 0ARCHIVE RUNS AT SAME TIME)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 10 AUG 2012

HYPER: NO


---------------------------------------------------------------------

SA03 DURING SHUTDOWN, IF 0ARCHIVE RUNS AT SAME TIME

---------------------------------------------------------------------

IF 0ARCHIVE IS SCHEDULED RIGHT BEFORE STOPPING JOBTRAC, THEN

ABEND SA03 (AND SUBSEQUENT ABENDS) MAY OCCUR DURING SHUTDOWN

PROCESSING.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO07180,RO31601)

SUP (T18D810).





DESC (MESSAGE TRACDBRC (WITH CEXL/GET9) FOR INTERVAL JOBS)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 13 AUG 2012

HYPER: NO


---------------------------------------------------------------------

MESSAGE TRACDBRC (WITH CEXL/GET9) FOR INTERVAL JOBS

---------------------------------------------------------------------

MSG TRACDBRC (WITH STRINGS CEXL AND GET9) MAY BE DISPLAYED

FROM TIME TO TIME FOR JOBS RUNNING MANY TIMES A DAY, LIKE

INTERVALS JOBS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.



RO19515,RO35515)

SUP (T18D819).





DESC (REDUCING THE I/O OF CXX.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 AUG 2012

HYPER: NO


---------------------------------------------------------------------

REDUCING THE I/O OF CXX.

---------------------------------------------------------------------

JOBTRAC CHECKING THE SPACE USAGE OR USER ISSUING THE

STATUS COMMAND HAS TO ACCESS DATACOM SYSTEM TABLES IN

CXX FILE. IN ORDER TO REDUCE THE I/O COUNT OF CXX,

THE INTERVAL OF CHECKING THE SPACE USAGE OF DATABASES

IS INCREASED FROM 25 SECONDS TO 5 MINUTES. ALSO DBID

IS PASSED TO THE PARM WHEN ACCESSING THE CXX TABLES.

---------------------------------------------------------------------

PROBLEM RESOLUTION:



-------------------------------------------------------------------*/.


PRE (RO22582,RO22603,RO32448)

SUP (TB91789).





DESC (EXCESSIVE I/O'S DONE FOR THE EZT REPORT "GJTREZJW".)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 29 AUG 2012

HYPER: NO


---------------------------------------------------------------------

EXCESSIVE I/O'S DONE FOR THE EZT REPORT "GJTREZJW".

---------------------------------------------------------------------

EXCESSIVE I/O'S FOR THE DISPLAY SCHEDULE WORKSHEET REPORT.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Rerun the EZT report GJTREZJW.


-------------------------------------------------------------------*/.


PRE (RO09045)

SUP (T18D823).





DESC (NO WARNING MSG ISSUED, IF CAPTURE FILE BECOMES FULL)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 30 AUG 2012

HYPER: NO


---------------------------------------------------------------------

NO WARNING MSG ISSUED, IF CAPTURE FILE BECOMES FULL

---------------------------------------------------------------------

CURRENTLY, NO WARNING MESSAGE IS ISSUED, WHEN THE INDEX

AND/OR DATA PART OF THE CAPTURE FILE BECOMES FULL.

THERE IS A WARNING MESSAGE FOR THE DATABASE, WHICH CAN

BE CHANGED WITH THE MODIFY CMD "F JOBTRAC,WARNPCT=NN",

AND THIS FUNCTION IS NOW USED FOR THE CAPTURE FILE TOO.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO49670)

SUP (T18D818).





DESC (NJE: LOOP IN COMPLETION PROCESSING AT REMOTE NODE.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 21 SEP 2012

HYPER: NO


---------------------------------------------------------------------

NJE: LOOP IN COMPLETION PROCESSING AT REMOTE NODE.

---------------------------------------------------------------------

IF THE RETURNING OF THE TERMINATION STATUS OF AN NJE JOB BACK TO

ITS ORIGINATING NODE ISN'T DONE OR IS MUCH DELAYED, IT CAN IMPACT

THE COMPLETION PROCESSING OF OTHER (LOCAL) EVENTS, OR EVEN A LOOP

CAN OCCUR, SO THAT EVENTS WILL REMAIN IN STATUS "WAIT EXEC".

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO18586)

SUP (T18D824).





DESC (XPLAT: MSG CASH_E_0148 WITH TEXT SUBMISSION FAILED.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 NOV 2012

HYPER: NO


---------------------------------------------------------------------

XPLAT: MSG CASH_E_0148 WITH TEXT SUBMISSION FAILED.

---------------------------------------------------------------------

SUBMITTING AN EVENT FROM JOBTRAC/MVS TO AN AGENT (UUJMA) REQUIRING

A PASSWORD FOR THE USERID RESULTS IN ERROR MESSAGE CASH_E_0148 WITH

TEXT "SUBMISSION FAILED, REASON = LOGON FAILURE: UNKNOWN USER NAME

OR BAD PASSWORD" FOR PASSWORDS CONTAINING CERTAIN CHARACTERS.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Re-LOGON to TSO/ISPF, re-define password.


-------------------------------------------------------------------*/.


PRE (RO22582)

SUP (T18D825).





DESC (PENDING DB REQUEST, MSGS DB00309I/DB01329I FOR MUF.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 NOV 2012

HYPER: NO


---------------------------------------------------------------------

PENDING DB REQUEST, MSGS DB00309I/DB01329I FOR MUF.

---------------------------------------------------------------------

WHEN THE JOBTRAC AT THE NJE REMOTE NODE IS SHUT DOWN RIGHT AT

THE TIME OF THE COMPLETION PROCESSING OF A REMOTE EVENT, THEN

THE DB UPDATE REQUEST MAY REMAIN PENDING (MISSING THE COMMIT).

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO35077)

SUP (T18D827).





DESC (TRACWARN MSG FOR CAPTURE FILE WITH DATA PART > 100%)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 26 NOV 2012

HYPER: NO


---------------------------------------------------------------------

TRACWARN MSG FOR CAPTURE FILE WITH DATA PART > 100%

---------------------------------------------------------------------

VERY LARGE CAPTURE FILES (FOR EXAMPLE 3000 CYL) CAN SHOW

VALUES ABOVE 100% IN MESSAGE TRACWARN FOR THE DATA SECTION.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO49724)

SUP (T18D829).





DESC (TABLE INFORMATIONS IN STATUS COMMAND ARE MISSING)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 28 NOV 2012

HYPER: NO


---------------------------------------------------------------------

TABLE INFORMATIONS IN STATUS COMMAND ARE MISSING

---------------------------------------------------------------------

AFTER DATACOM IS UPGRADED FROM R12 TO R14.

BECAUSE THE SIZE OF DRT SYSTEM TABLE IS TWO BYTES

LONGER.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Refresh LLA if necessary. Jobtrac does not have to be recycled,

User must log off from ISPF of Jobtrac.

-------------------------------------------------------------------*/.


PRE (RO49670)

SUP (TB91794).





DESC (NJE JOB CAN REMAIN IN STATUS "NAWT" AT LOCAL NODE.)

/*-------------------------------------------------------------------

PRODUCT: CA-Jobtrac

RELEASE: 11.0

DATE: 6 DEC 2012

HYPER: NO


---------------------------------------------------------------------

NJE JOB CAN REMAIN IN STATUS "NAWT" AT LOCAL NODE.

---------------------------------------------------------------------

A REMOTE JOB (NJE) CAN REMAIN IN STATUS "NAWT" AT LOCAL NODE

EVEN THOUGH IT COMPLETED FINE AT THE REMOTE NODE.

---------------------------------------------------------------------

PROBLEM RESOLUTION:


Recycle CA-Jobtrac.


-------------------------------------------------------------------*/.


PRE (RO49177)

SUP (T18D826).





EVENT SOURCE NOT DISPLAYED ON HISTORY DETAIL

PROBLEM DESCRIPTION:

The field Event Src. that appears on the detail screens for waiting

and executing events is not displayed on the history detail screen,

GJTREVHI. The Report: and Schedule Environment: fields are also not

included.

SYMPTOMS:

Panel GJTREVHI does not include Event Src.

IMPACT:

The source of a event on history cannot be deterimined from the

panel.

CIRCUMVENTION:

The event source can be determined using SQL.

PRODUCT(S) AFFECTED: CA-Jobtrac Release 11.0

Star Problem(s):

JOBTRC 1440

Copyright (C) 2013 CA. All rights reserved. R00002-BRR110-SP1

DESC(EVENT SOURCE NOT DISPLAYED ON HISTORY DETAIL) .

++VER (Z038)

FMID (CHDB000)

PRE ( QO94373 RO00819 RO01067 )

SUP ( TR53649 )





T18D831-ABEND S0C4-11 IN MODULE GJTRDCOM AT X'65C'


If task 0ARCHIVE runs parallel to many SCL loads, abend S0C4

can happen for Jobtrac (in module GJTRDCOM at offset x'65C'),

but the Jobtrac/STC itself doesn't terminate.

SYMPTOMS:

Abend S0C4-11 and task 0ARCHIVE terminates with "RC=16".

IMPACT:

Medium.

CIRCUMVENTION:

None.


Star Problem(s):

JOBTRC 1442


DESC(T18D831-ABEND S0C4-11 IN MODULE GJTRDCOM AT X'65C') .

++VER (Z038)

FMID (CHDB000)

PRE ( RO01761 RO02211 RO02333 RO05241 RO09948 RO14264

RO14409 )

SUP ( QO90918 QO93493 RO01883 RO04440 RO06457 RO06488

RO14303 RO14598 RO23622 RO32352 TR54356 )





RETURN CODE 3955 IN MESSAGE TRAC822I ISN'T CORRECT


If message TRAC822I includes Imod $JOBT_REMTAGENT, then the return

code "nnnn" should point to a message-ID of the format "TRCInnnn".

However, in case of message TRCI1110 a return code of "3955" is

listed, which is not correct and should have been "1110".

SYMPTOMS:

Return code "3955" in message TRAC822I isn't correct.

IMPACT:

Medium.

CIRCUMVENTION:

None.


Star Problem(s):

JOBTRC 1443


DESC(RETURN CODE 3955 IN MESSAGE TRAC822I ISN'T CORRECT) .

++VER (Z038)

FMID (CHDB000)

SUP ( TR54399 TR54472 )


REASON (ACTION ) DATE (13114)

COMMENT (

Product: CA-Jobtrac Release: 11.0

After application of this PTF run the following step:



//PDSISET DD DISP=SHR,DSN=your.jobtrac.CAISRC




//SYSIN DD *

PDSLOAD MEMBER $JBTAGNT TO ISET FROM PDSISET -

REPLACE IMOD $JOBT_REMTAGENT

COMPILE IMOD $JOBT_REMTAGENT IN ISET STATUS PROD

/*

Recycle CA GSS to get the new copy of the IMOD.

Add the following phrase to the APPLY and ACCEPT commands to

allow SMP/E to install this SYSMOD: BYPASS(HOLDSYS(ACTION))

Sequence:

Purpose:

Relevance:

Knowledge required:

Access required:

Steps to Perform:

).





FORECAST JOB GETS ABEND S0C7 WITH EASYTRIEVE 11.6.


Using EasyTrieve 11.6 to run Jobtrac's forecast job FORECAST

(SAMPJCL) causes abend S0C7 in module GJTREZDO at offset x'162'.

SYMPTOMS:

Abend S0C7 when running sample forecast jobs FORECAST/FORCASTX.

IMPACT:

Medium.

CIRCUMVENTION:

Use the common component EZT 6.4 from CA Common Services.


Star Problem(s):

JOBTRC 1435


DESC(FORECAST JOB GETS ABEND S0C7 WITH EASYTRIEVE 11.6.) .

++VER (Z038)

FMID (CHDB000)

PRE ( QO99464 RO02125 RO02174 RO02208 RO05394 RO05776

RO09045 )

SUP ( TR54877 TR55045 T18D828 )





OVERRIDE "@CYCNNN=MMDD,..." DOESN'T WORK CORRECTLY


Use of Global control record "@CYCnnn=mmdd,..." to override the

CYCLIC calendar definition for location "nnn" from the database

doesn't work, that is scheduling is still done according to the

entries from the CYCLIC calendar for events with location "nnn"

specified in columns 76-78 of the SCL member.

SYMPTOMS:

Global control record "@CYCnnn=mmdd,..." not working properly.

IMPACT:

Medium.

CIRCUMVENTION:

None.


Star Problem(s):

JOBTRC 1438


DESC(OVERRIDE "@CYCNNN=MMDD,..." DOESN'T WORK CORRECTLY) .

++VER (Z038)

FMID (CHDB000)

PRE ( QO88266 QO89826 QO90293 QO91533 RO06360 RO10446

RO10616 )

SUP ( QO88150 QO90341 QO90888 QO91597 QO92219 QO92279

QO92317 QO93829 QO96558 QO97130 QO99065 QO99101

RO00809 RO02212 RO04349 RO04680 RO04717 RO05235

RO05283 RO06399 RO06427 RO07214 RO07230 RO07286

RO09272 RO10362 RO10690 RO14508 RO14550 RO15405

RO16680 RO17639 RO18557 RO22533 RO22620 RO31460

RO37696 RO43607 TR54655 TR54863 TR55046 T18D830 )





AN "M-DEP" ERRONEOUSLY ASSIGNED TO A FUTURE EVENT.


Scheduling an event for a future date (with Global Control record

"@TODAY=yyddd") can erroneously assign an "M-DEP" even though it

should only be done for events scheduled for the past (if option

"TNDOVLP=Y" is set or defaulted).

SYMPTOMS:

Message "<== TIME/DATE OVERLAP: MUST HAVE DEPENDENCY." and an "M"

dependency is attached to an event scheduled for a future date.

IMPACT:

Medium.

CIRCUMVENTION:

Option "TNDOVLP=N" will disable this feature.


Star Problem(s):

JOBTRC 1444


DESC(AN "M-DEP" ERRONEOUSLY ASSIGNED TO A FUTURE EVENT.) .

++VER (Z038)

FMID (CHDB000)


RO10616 )


QO92317 QO93829 QO96558 QO97130 QO99065 QO99101

RO00809 RO02212 RO04349 RO04680 RO04717 RO05235

RO05283 RO06399 RO06427 RO07214 RO07230 RO07286

RO09272 RO10362 RO10690 RO14508 RO14550 RO15405

RO16680 RO17639 RO18557 RO22533 RO22620 RO31460

RO37696 RO43607 RO55046 TR54655 TR54863 TR55046

TR55093 T18D830 )





CONVERTED JOB REMAINS IN STATUS "WAIT EXEC" IN R11


A job which didn't run yet under control of r35 (Hold queue)

and which is then converted to r11, will remain in status

"WAIT EXEC" after being submitted under control of r11.

SYMPTOMS:

Converted job remains in status "WAIT EXEC" after submit.

IMPACT:

Medium.

CIRCUMVENTION:

Re-Schedule (or re-ADD) job under r11 prior to submission.


Star Problem(s):

JOBTRC 1446


DESC(CONVERTED JOB REMAINS IN STATUS "WAIT EXEC" IN R11) .

++VER (Z038)

FMID (CHDB000)

PRE ( QO91989 QO95200 RO01067 RO10345 RO14264 )

SUP ( QO95549 RO24852 TR55397 )





S0C6 ABEND IN GSVXSPF WHEN ISSUING THE Q COMMAND


Issuing the Q line command to a completed job in Jobtrac ISPF panel,

ISPF got S0C6 abend instead of a list of sysouts in Sysview.

SYMPTOMS:

ISPF panel got messages about S0C6 abend in GSVXSPF.

IMPACT:

Medium.

CIRCUMVENTION:

Accessing the sysouts through Sysview directly.


Star Problem(s):

JOBTRC 1447


DESC(S0C6 ABEND IN GSVXSPF WHEN ISSUING THE Q COMMAND) .

++VER (Z038)

FMID (CHDB000)


RO06353 RO07317 RO10710 RO12254 RO15633 RO15674

RO22582 RO22603 RO22661 RO23197 )


QO95562 QO96559 RO00035 RO00153 RO00174 RO00844

RO03445 RO06403 RO06442 RO09129 RO09218 RO09315

RO09329 RO12670 RO12716 RO12778 RO14269 RO15641

RO15693 RO23270 RO24110 RO32475 RO40674 RO43235

TR55750 )

MCS QO86119 STARTS ON PAGE 0012








































Release Service DetailsMCS QO90340 STARTS ON PAGE 0028



































































CA Jobtrac Job Management 11.0 1 CA RS 1309 … · QO93496 Increase SPACE allocation for REXX...

Documents

Transcript of CA Jobtrac Job Management 11.0 1 CA RS 1309 … · QO93496 Increase SPACE allocation for REXX...