C03 Import and Display 2010
-
Upload
anonymous-4hvwnxu9v -
Category
Documents
-
view
216 -
download
0
Transcript of C03 Import and Display 2010
-
7/25/2019 C03 Import and Display 2010
1/12
Fracture ModelingPetrel 2010
QC and use Fracture
Attribute Data
Initial Data
Analysis
Modeling Fracture
Parameters
Building Fracture
Model
Upscaling Fracture model with
Multiple Fracture Drivers
Import/Display
Simulation
Fracture Modeling
Intro
Theorethical
Background
-
7/25/2019 C03 Import and Display 2010
2/12
Import and DisplayObjectives
Import and display Dipmeter data.
Visualize fractures in 3D along Well bore
QC and use Spreadsheet actively
Create Tadpole panels for visualizing fracture dips
Create Rose diagrams to check fracture azimuth
Optional: Import and visualize image logs
-
7/25/2019 C03 Import and Display 2010
3/12
Import and DisplayFracture well dataImport Workflow
A full Fracture Modeling workflow in Petrel integrates:
Fracture indicators (well data)
Fracture drivers (seismic and geomechanical properties)
Well data and attributes involves:
Point data (dip, azimuth etc.)Fracture logs (trace length, frac density, aperture etc.)
Image logs (FMI, core etc only for visualization)
Assumptions:
Dips have been picked
(not possible in Petrel)
Fracture logs have
alreay been processed
Outside Petrel Inside Petrel
-
7/25/2019 C03 Import and Display 2010
4/12
Import and Display1. Fracture dataImport
Fracture point data Import format Once imported, fracture point
well data is stored as an object
under Global well logs
Fracture point data Select attributes
-
7/25/2019 C03 Import and Display 2010
5/12
Import and Display2. Fracture dataDisplay
Well Section display 3D window display
Fracture
point data
Fracture
log data
Dip/Azimuth
point data
-
7/25/2019 C03 Import and Display 2010
6/12
Import and Display3. QCPoint Spreadsheet
Check Spreadsheetto get an overview of all imported attributes.
The spreadsheet can be filtered by well.
-
7/25/2019 C03 Import and Display 2010
7/12
Import and Display4. Create Tadpole tracksFracture Dip
Add a new tadpole track in Well section
settings. Select fracture points using dip
azimuth and dip angle (0-90 deg).
The tadpole will automatically be displayed
in the active well section
-
7/25/2019 C03 Import and Display 2010
8/12
Import and Display5. Create Rose diagramsFracture Dip orientation
Create new Rose diagramtrackfrom Well section settings.
The Rose diagram will
automatically be displayed in the
active well section.
Tips:
The rose diagrams
can be displayed
between well tops
or at given depthintervals
-
7/25/2019 C03 Import and Display 2010
9/12
Import and Display5. Create Rose diagramsFracture Strike orientation
Dip azimuths can be displayed aspoints.
Show Strikeinstead of dip azimuth.
-
7/25/2019 C03 Import and Display 2010
10/12
Import and Display6. Image LogImport (optional)
When importingimage logslike core and FMI, they have a different import dialog from
conventional logs. Rename all logs with MD values in the name to make the procedure easy,
and save as.BMPfiles.). They will be saved as separate Global well logs
Tips:
Import all images at once. Set startand stopMD
as there is no depth referencing for this log type.
-
7/25/2019 C03 Import and Display 2010
11/12
Import and Display6. Image LogDisplay (optional)
A global image log is stored for each well (if all logs are imported at once), separated by redlines (control points). Update the Well section template using the image logs for each well.
-
7/25/2019 C03 Import and Display 2010
12/12
EXERCISESModule 3
P.108 - 122