DUMP PUMPS

“C” SERIES DIRECT MOUNT

Part Number Description Shaft Gear Inlet Pressure &Return Port

HC102-LMS-20 Left hand rotationmanual shift 7/8”-13 Tooth 2” 1-1/4” NPT 1” NPT

HC102-LMS-25 Left hand rotationmanual shift 7/8”-13 Tooth 2.5” 1-1/4” NPT 1” NPT

HC102-LAS-25 Left hand rotationwith air shift cylinder 7/8”-13 Tooth 2.5” 1-1/4” NPT 1” NPT

HC102-RMS-25 Right hand rotationmanual shift 7/8”-13 Tooth 2.5” 1-1/4” NPT 1” NPT

HC102-RAS-25 Right hand rotationwith air shift 7/8”-13 Tooth 2.5” 1-1/4” NPT 1” NPT

replacement for Parker/Commercial C102 series

“C” SERIES REMOTE MOUNTreplacement for Parker/Commercial C101 series

Part Number Description Shaft Gear Inlet Pressure &Return Port

HC101-XMS-20 Either shaft rotationmanual shift 1” Keyed 2” 1-1/4” NPT 1” NPT

HC101-XMS-25 Either shaft rotationmanual shift 1” Keyed 2.5” 1-1/4” NPT 1” NPT

“G” SERIES DIRECT MOUNTreplacement for Parker/Commercial G102 series

Part Number Description Shaft Gear Inlet Pressure &Return Port

HG102-LMS-20 (4B) Left hand rotation, manual shiftdirect mount, 4 bolt mount 7/8”-13 Tooth 2” 1-1/4” NPT 3/4” NPT

HG102-LMS-20 (2B) Left hand rotation, manual shiftdirect mount, 2 bolt mount 7/8”-13 Tooth 2” 1-1/4” NPT 3/4” NPT

HG102-RMS-20 (4B) Right hand rotation, manual shiftdirect mount, 4 bolt mount 7/8”-13 Tooth 2” 1-1/4” NPT 3/4” NPT

13660 Redwood Ct. Chino CA, 91710Toll Free: 1-866-865-8889

Fax:909-498-0468www.heavymotions.com

Please note: All parts supplied are Heavy Motions®. The use of other manufactures’ names, part numbers, descriptions or trademarks is for cross reference and informational purposes only.

“G” SERIES REMOTE MOUNTreplacement for Parker/Commercial G101 series

Part Number Description Shaft Gear Inlet Pressure &Return Port

HG101-XMS-20 Either shaft rotationmanual shift 1” Keyed 2” 1-1/4” NPT 3/4” NPT

Accessories

Part Number Description

HM314-0100-005 For C101 and G101

MOUNTING BRACKET

Part Number Description

AKC102 C101/102, 2 bolt pattern

AKC102-4 C101/C102, Air shift kit, 4 bolt pattern

AKG102 G101/G102, 2 bolt pattern

Part Number Description

HMDPC-10 10 Foot push/pulldump pump cable

AIRSHIFT VALVE

PUSH/PULL CABLE

AKC102

AKG102

AKC102-4

HC102 Exploded View

1 2 3

45 6

78

9

10 1112

13

14

15 8 16

14 713

6

17

18

19

2021 22 23

2425

2627 28 29

30

29

31

3233 34

HC102 Parts Break DownItem Part Number Description Req.

1 HM391-2686-065 Spiral Ring 12 HM391-3383-087 Seal Retainer 13 HM391-2883-115 Shaft Seal 14 51M-SEC-4B Shaft End Cover 15 HM391-3681-001 Check Valves 26 HM391-2585-009 Ring Seals 27 WS1032 Roller Bearings 48 P51-THRUST Thrust Plates 29 50-GS-14S-25 Shaft & Gear Set 2-1/2” 110 **** Studs 411 HM391-3784-028 Washers 412 HM391-1451-076 Hex Nuts 413 HM391-2082-032 Dowels 414 HM391-2884-021 Gasket Seals 215 102-H-25 Gear Housing 2-1/2” 116 HM391-2882-051 *Pocket Seal Strip 117 **** *Port End Cover 118 HM391-3283-052 *Sleeve (optional) 119 HM355-9001-067 Relief Valve 120 HM391-2688-003 Snap Ring 121 HM391-1401-082 Cap Screws 422 HM391-3782-126 Retainer Ring 123 HM391-2883-147 Wiper Ring 124 HM391-2583-079 Detent Retainer 125 HM391-3788-002 Lock Washer 126 HM391-3581-383 Detent Spring 127 HM391-0282-009 Detent Ball 128 HM314-0100-003 Detent Cap 129 HM391-2881-103 O-ring 230 **** Valve Spool 131 HM391-2085-009 Sheer Pin 132 HM391-1881-073 Spool End Cap 133 HM391-0981-010 End Cap Bracket 134 HM391-1402-063 Socket Head Bracket Screws 2

Note: *Item 17 and 30 are non-serviceable parts, item 10 is a non stocking item. Please call us for further details.