C-more Operator Panels Overview - AutomationDirect
Transcript of C-more Operator Panels Overview - AutomationDirect
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–29
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
Compatibility withour past!All C-more panels have been designed to fit inthe same dimensional cutout as a similar sizedEZTouch panel*. In addition, C-more canconvert and run existing EZTouch projectscreated with EZTouch Edit 3.1a sold byAutomationDirect. Just point, click and convertEZTouch projects to C-more and you areready to go. All your hard work is transferred.To replace an EZTouch:
1) Remove it from its mounting cutout.2) Click on your existing EZTouch project in the
C-more browser. It will be converted to aC-more project, which can be downloadedinto the new C-more panel.
3) Now mount the new C-more into the oldcutout (using adapter plate where required)and reconnect your existing cables.
It’s that simple!
Getting startedInstalling the software and configuring the C-more panel is simple. You will need thefollowing to successfully connect andconfigure a project for the panel:
• C-more touch panel - 6”, 8”, 10”, 12” or 15”model
• C-more Programming Software,p/n EA-PGMSW
• C-more programming cable, USB or Ethernet• 24 VDC switching power supply (min. 1.5A,
switching) or the optional C-more AC PowerAdapter
• Personal Computer - to run C-moreprogramming software
• PLC communications cable (serial or Ethernet)to connect the C-more Touch Panel to yourcontroller
* Replacement of an EZTouch wide bezel 6”model requires adapter EA-6-ADPTR.
C-more Operator Panels Overview
Part Number Description Price
EA7-S6M-R
6-inch C-more grayscale STN touch panel (5.7 inch viewablescreen), 15 shades of gray, 320 x 240 pixel QVGA screen resolu-tion, 333 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only),non-replaceable 50,000 hour half-life backlight.*Base Model: Built-in USB, no Ethernet or CompactFlash support.
<--->
EA7-S6C-R
6-inch C-more color STN touch panel (5.7 inch viewable screen),256 colors, 320 x 240 pixel QVGA screen resolution,333 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only), non-replaceable 50,000 hour half-life backlight.*Base Model: Built-in USB, no Ethernet or CompactFlash support.
<--->
EA7-S6M
6-inch C-more grayscale STN touch panel (5.7 inch viewablescreen), 15 shades of gray, 320 x 240 pixel QVGA screen resolu-tion, 333 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only),non-replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA7-S6C
6-inch C-more color STN touch panel (5.7 inch viewable screen),256 colors, 320 x 240 pixel QVGA screen resolution,333 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only), non-replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA7-T6C
6-inch C-more color TFT touch panel (5.7 inch viewable screen),65K colors, 320 x 240 pixel QVGA screen resolution,333 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only), non-replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA7-T8C
8-inch C-more color TFT touch panel (8.4 inch viewable screen),65K colors, 640 x 480 pixel VGA screen resolution,400 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only),user replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA7-T10C
10-inch C-more color TFT touch panel (10.4 inch viewable screen),65K colors, 640 x 480 pixel VGA screen resolution,400 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only),user replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA7-T12C
12-inch C-more color TFT touch panel (12.1 inch viewable screen),65K colors, 800 x 600 pixel SVGA screen resolution,400 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only),user replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA7-T15C
15-inch C-more color TFT touch panel (15.0 inch viewable screen),65K colors, 1024 x 768 XGA screen resolution,400 MHz CPU, 24 VDC (20.4-28.8 VDC operating range),NEMA 4/4X, IP-65 (when mounted correctly; for indoor use only),user replaceable 50,000 hour half-life backlight.Built-in Ethernet and USB; supports CompactFlash.
<--->
EA-PGMSWC-more touch panel Windows-based configuration software.Requires Windows® Vista, 2000 Service Pack 4 or XP Home orProfessional Service Pack 2. Includes software installation guideand CD-ROM. Requires USB 1.1 or Ethernet connection to touchpanel. Cables sold separately.
<--->
USB-CBL-AB3Standard 3-ft. (0.9m) USB 2.0 cable, A-type connector to B-typeconnector, used to connect personal computer to any C-more touchpanel for setup and programming. (Note: Touch panels require a 24VDC power source for configuration and operation.)
<--->
USB-CBL-AB6Standard 6-ft. (1.8m) USB 2.0 cable, A-type connector to B-typeconnector, used to connect personal computer to any C-more touchpanel for setup and programming. (Note: Touch panels require a 24VDC power source for configuration and operation.)
<--->
USB-CBL-AB10Standard 10-ft (3 meter) USB 2.0 cable, A-type connector to B-typeconnector, used to connect personal computer to any C-more touchpanel for setup and programming. (Note: Touch panels require a 24VDC power source for configuration and operation.)
<--->
USB-CBL-AB15Standard 15-ft. (4.6m) USB 2.0 cable, A-type connector to B-typeconnector, used to connect personal computer to any C-more touchpanel for setup and programming. (Note: Touch panels require a 24VDC power source for configuration and operation.)
<--->
Touch Panel Part Number Key:
EA7-xxx-xLCD Type: S: STN T: TFT
Color: C: color M: gray scale
Features: blank: Full R: Base
Screen Size: 6: 5.7” 8: 8.4” 10: 10.4” 12: 12.1” 15: 15.0”
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–30 Operator Interface
C-more Part Number Cross Reference
EZTouch (as sold by AutomationDirect) C-more *EZTouch 6”, grayscale STN (0–45 °C) C-more 6” Adapter C-more 6”, grayscale STN (0–50 °C)
EZ-S6M-R Requires: EA-6-ADPTR EA7-S6M-R <--->
EA7-S6M <--->(includes Ethernet)
EZ-S6M-RS
EZ-S6M-F Requires: EA-6-ADPTR
EZ-S6M-FS
EZTouch 6”, 128 Color STN (0–45 °C) C-more 6” Adapter C-more 6”, 256 Color STN or 65,536 Color TFT (0–50 °C)
EZ-S6C-K Requires: EA-6-ADPTR EA7-S6C-R <--->(256 Color STN)
EA7-S6C <--->(256 Color STN; includes Ethernet)
EA7-T6C <--->(65,536 Color TFT; includes Ethernet)
EZ-S6C-KS
EZ-S6C-F Requires: EA-6-ADPTR
EZ-S6C-FS
EZ-S6C-FST
EZTouch 8”, 128 Color STN (0–40 °C) C-more 8”, 65,536 Color TFT (0–50 °C)
EZ-S8C-F
EA7-T8C <--->(includes Ethernet)
EZ-S8C-FS
EZ-S8C-FST
EZTouch 10”, 128 Color TFT (0–50 °C) C-more 10”, 65,536 Color TFT (0–50 °C)
EZ-T10C-F
EA7-T10C <--->(includes Ethernet)
EZ-T10C-FS
EZ-T10C-FST
EZ-T10C-FSE
No 12” EZTouch available C-more 12”, 65,536 Color TFT (0–50 °C)
EA7-T12C <--->(includes Ethernet)
EZTouch 15”, 128 Color TFT (0–45 °C) C-more 15”, 65,536 Color TFT (0–50 °C)
EZ-T15C-FS
EA7-T15C <--->(includes Ethernet)EZ-T15C-FST
EZ-T15C-FSE
* Note: All C-more touch panels are NEMA 4/4X, IP-65 (when mounted correctly, for indoor use only), non-FDA.
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–31
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
Model 6” STN grayscalew/ base features
6” STN colorw/ base features
6” STN grayscalew/ full features
6” STN colorw/ full features
6” TFT colorw/ full featuresSpecification
Part Number EA7-S6M-R EA7-S6C-R EA7-S6M EA7-S6C EA7-T6C
Price <---> <---> <---> <---> <--->
Display Actual Size and Type 5.7" STN grayscale 5.7" STN color 5.7" STN grayscale 5.7" STN color 5.7" TFT color
Color Scale 15 shades of gray 256 colors 15 shades of gray 256 colors 65,536 colors
Display Viewing Area 4.54" x 3.4" [115.2 mm x 86.4 mm]
Screen Pixels 320 x 240 (QVGA)
Display Brightness 150 cd/m2 (NITS) 200 cd/m2 (NITS) 150 cd/m2 (NITS) 200 cd/m2 (NITS) 270 cd/m2 (NITS)
LCD Panel Dot Pitch 0.36 mm x 0.36 mm
Backlight Average Lifetime* Approximately 50,000 hours
Backlight User Replaceable No
Touch Panel Type Analog Resistive (10-bit resolution, 1024 x 1024 touch area)
CPU Type 32-Bit RISC CPU (333 MHz)
Battery Replaceable battery – ADC Part # D2-BAT-1 (Manufacturer Part # CR2354)
System Memory SDRAM 32 MBytes
System Flash Memory FLASH 32 MBytes
Backup Memory (SRAM) Control data backup memory (SRAM) 256 KBytes
Logging Data Memory USB Pen Drive p/n SDCZ4-2048-A10 (Optional) CompactFlash Memory Card p/n EA-CF-CARD, industrial grade, high speed (Optional)or USB Pen Drive p/n SDCZ4-2048-A10 (Optional)
Number of Screens Up to 999 – limited by available project memory (10 MBytes)
Realtime Clock Built into panel (PLC clock is still accessible if available)
Calendar – Month/Day/Year Yes - battery backup
Screen Saver Yes, backlight turns off after a 30–1500 minute adjustable time, or can be disabled
Serial PLC Interface Serial PLC Port: RS-232/422/485 15-Pin D-sub (female)
USB Port – Type B Download/Program – USB Port – type B (ver. 1.2)
USB Port – Type A Port for USB device options – type A (ver. 1.2)
Ethernet Port not available Ethernet 10/100 Base-T
Audio Line Out not available Audio Line Out, 1 Volt rms, stereo – requires amplifier and speaker(s)
CF Card – Slot #1 not available Optional: CompactFlash Memory Card p/n EA-CF-CARD, industrial grade,high speed, CF slot #1 located on top side of touch panel.
Expansion Assembly(p/n EA-EXP-OPT) not available
Optional: Use the CF Card Interface Module p/n EA-CF-IF in the right slot of theExpansion Assembly for installing CF card - Slot #2.
The left slot of the Expansion Assembly is for future options.Supply Power 24 VDC, -15%, +20% (20.4–28.8 VDC oper. range) (Use AC Power Adapter, p/n EA-AC, to power panel from a 100-240 VAC, 50/60 Hz. power source.)
Power Consumption 9W @ 24 VDC 10 W @ 24 VDC 10 W @ 24 VDC 11 W @ 24 VDC 13 W @ 24 VDC
Recommended Input Fuse 3.0 A DC slow blow
Operating Temperature 0 to 50°C (32 to 122°F) Max surrounding air temperature rating: 50°C
Storage Temperature –20 to +60°C (–4 to +140°F)
Humidity 10–85% RH, non-condensing
Noise Immunity Noise voltage: 1,000 Vp-p, Pulse width: 1 µs, Rise time: 1 ns
Withstand Voltage 1,000 VDC for 1 minute, between DC power supply input terminal and safety ground
Insulation Resistance Over 20 M� between DC power supply input terminal and safety ground
Vibration IEC61131-2 compliant, 10–57 Hz: 0.075 mm amplitude, 57–150 Hz 1.0 G: 10 sweep cycles per axis on each of 3 mutually perpendicular axes
Shock 15 G peak, 11 ms duration, 2 shocks per axis, on 3 mutually perpendicular axes
Enclosure IP-65 Meets UL Type 4X when mounted correctly. For indoor use only.
Environment For use in Pollution Degree 2 Environment
Agency Approvals UL, cUL, CE
Dimensions 6.140" x 8.047" x 1.697" [156.0 mm x 204.4 mm x 43.1 mm]
Weight 1.46 lb. [660 g] 1.39 lb. [630 g] 1.50 lb. [680 g] 1.43 lb. [650 g] 1.52 lb. [690 g]
* NOTE: The backlight average lifetime is defined as the average usage time it takes before the brightness becomes 50% of the initial brightness. The lifetime of thebacklight depends on the ambient temperature. The lifetime will decrease under low or high temperature usage.
C-more Selection Guide & Specifications
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–33
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
Features• 5.7" diagonal color STN (Super Twisted
Nematic) LCD display with 15 shades ofgray
• 320 x 240 pixel resolution• 150 NITS display brightness• 50,000 hour average backlight lifetime• Analog resistive (1024 X 1024) touch
screen allowing unlimited touch areas• USB port B (program/download) and
USB port A (USB device options)• Serial PLC interface (RS-232/422/485)• 24 VDC powered, 110 VAC power adapter
(optional) • 10 MByte project memory• 0 to 50°C (32 to 122°F) operating
temperature range• NEMA 4/4X, IP-65 compliant when
mounted correctly, indoor use only• Slim design saves panel space• UL, cUL & CE agency approvals• 2-year warranty from date of purchase
C-more 6" STN Grayscale Touch Panel - Base ModelThe C-more 6" grayscale base touch panel has a 5.7" diagonal analog (1024 X 1024)touch screen with a 320 x 240 (QVGA) pixel resolution STN LCD (liquid crystal display)with 15 shades of gray. C-more 6” touch panels can be directly mounted into EZTouch6” slim touch panel cutouts. Use the optional 6” Adapter Plate (EA-6-ADPTR) to retrofitC-more 6” touch panels into EZTouch 6” non-slim (wide bezel) touch panel cutouts.
USB A(Device Options)
USB B(Programming/
Download)
PLC SerialCommunications
PWR
CPU
TxD
RxD
IOIOI–PLC
BATT
DC Power Label
Product Label
CF Slot #1(not available)
Optional ExpansionAssembly Location(not available)
Ports & Memory Expansion7.460[189.5]
CUTOUT
0.866 [22.0]
5.512[140.0]
0.866 [22.0]
0.591 [15.0]
6.413 [162.9]
Bezel Outline
Cutout Outline
0.294 [7.5]
0.591 [15.0]
0.294 [7.5]
0.315 [8.0]
0.315 [8.0] Units: inches[mm]
Mounting Clip (2) places
Mounting Cutout
Part No. EA7-S6M-R
Gasket
Mounting Clip (2) places
8.047 [204.4]
6.140 [156.0]
7.402 [188.0]
1.500 [38.1]
0.197 [5.0]
5.458 [138.6]
Dimensions
<--->
ULC USR
Function Available Associated Features
Ethernet
USB Compact
Flash Expansion Assembly
Audio Out
No
Yes
No
No
No
FTP - Email - Web Server
Data Logging
Data Logging/Project
CF Module & future modules
Speaker/Amplifier Connection
Ethernet No Remote access over internet
PLC DriversSerial Avail.AutomationDirect CLICK YesDirect LOGIC K-sequence YesDirect NET YesModbus (Koyo Addressing) YesAllen-Bradley DF1 Full & HalfDuplex Yes
Allen-Bradley PLC5 DF1 YesAllen-Bradley DH-485 YesAllen-Bradley DF1 Full & HalfDuplex - Tag Based * Yes
Modbus RTU YesEntivity Modbus RTU YesGE SNPX (90/30, 90/70),Micro 90, VersaMax Micro) Yes
Omron Host LinkC200 Adapter C500 Yes
Omron FINS (CJ1, CS1) YesMitsubishi FX YesMitsubishi Q02, Q02H, Q06H,Q12H, Q25H Yes
Mitsubishi Q, QnA Serial YesSiemens PPI (S7-200 CPU) Yes
Ethernet **The EA7-S6M-R and EA7-S6C-Runits do not support Ethernet.
inches / [mm]
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–34 Operator Interface
C-more 6" STN Color Touch Panel - Base Model
The C-more 6” STN color base touch panel uses a 5.7" diagonal analog (1024 X 1024)touch screen with a 320 x 240 (QVGA) pixel resolution STN LCD (liquid crystal display)with 256 colors. C-more 6” touch panels can be directly mounted into EZTouch 6” slimtouch panel cutouts. Use the optional 6” Adapter Plate (EA-6-ADPTR) to retrofit C-more 6” touch panels into EZTouch 6” non-slim (wide bezel) touch panel cutouts.
USB A(Device Options)
USB B(Programming/
Download)
PLC SerialCommunications
PWR
CPU
TxD
RxD
IOIOI–PLC
BATT
DC Power Label
Product Label
CF Slot #1(not available)
Optional ExpansionAssembly Location(not available)
Ports & Memory Expansion
Part No. EA7-S6C-R
7.460[189.5]
CUTOUT
0.866 [22.0]
5.512[140.0]
0.866 [22.0]
0.591 [15.0]
6.413 [162.9]
Bezel Outline
Cutout Outline
0.294 [7.5]
0.591 [15.0]
0.294 [7.5]
0.315 [8.0]
0.315 [8.0] Units: inches[mm]
Mounting Clip (2) places
Mounting Cutout
Gasket
Mounting Clip (2) places
8.047 [204.4]
6.140 [156.0]
7.402 [188.0]
1.500 [38.1]
0.197 [5.0]
5.458 [138.6]
Dimensions
Features• 5.7" diagonal color STN (Super Twisted
Nematic) LCD display with 256 colors
• 320 x 240 pixel resolution
• 200 NITS display brightness
• 50,000 hour average backlight lifetime
• Analog resistive (1024 X 1024) touchscreen allowing unlimited touch areas
• USB port B (program/download) andUSB port A (USB device options)
• Serial PLC interface (RS-232/422/485)
• 24 VDC powered, 110 VAC power adapter(optional)
• 10 MByte project memory
• 0 to 50°C (32 to 122°F) operatingtemperature range
• NEMA 4/4X, IP-65 compliant whenmounted correctly, indoor use only
• Slim design saves panel space
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
<--->
ULC USR
Function Available Associated Features
Ethernet
USB Compact
Flash Expansion Assembly
Audio Out
No
Yes
No
No
No
FTP - Email - Web Server
Data Logging
Data Logging/Project
CF Module & future modules
Speaker/Amplifier Connection
Ethernet No Remote access over internet
PLC DriversSerial Avail.AutomationDirect CLICK YesDirect LOGIC K-sequence YesDirect NET YesModbus (Koyo Addressing) YesAllen-Bradley DF1 Full & HalfDuplex Yes
Allen-Bradley PLC5 DF1 YesAllen-Bradley DH-485 YesAllen-Bradley DF1 Full & HalfDuplex - Tag Based * Yes
Modbus RTU YesEntivity Modbus RTU YesGE SNPX (90/30, 90/70),Micro 90, VersaMax Micro) Yes
Omron Host LinkC200 Adapter C500 Yes
Omron FINS (CJ1, CS1) YesMitsubishi FX YesMitsubishi Q02, Q02H, Q06H,Q12H, Q25H Yes
Mitsubishi Q, QnA Serial YesSiemens PPI (S7-200 CPU) Yes
Ethernet **The EA7-S6M-R and EA7-S6C-Runits do not support Ethernet.
inches / [mm]
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–35
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
C-more 6" STN Grayscale Touch Panel - Full ModelThe C-more 6" grayscale full featured touch panel has a 5.7" diagonal analog (1024 X1024) touch screen with a 320 x 240 (QVGA) pixel resolution STN LCD (liquid crystaldisplay) with 15 shades of gray. C-more 6” touch panels can be directly mounted intoEZTouch 6” slim touch panel cutouts. Use the optional 6” Adapter Plate, (EA-6-ADPTR) toretrofit C-more 6” touch panels into EZTouch 6” non-slim (wide bezel) touch panelcutouts.
USB A(Device Options)
USB B(Programming/
Download)
For Future Use
Audio Line Out
PLC SerialCommunications
PWR
CPU
TxD
RxD
IOIOI–PLC
BATT
DC Power Label
Product Label
Ethernet 10/100 Base-T(PLC Communications,Programming/Download)
CF Slot #1(Top of Panel)
Optional ExpansionAssembly Location
Ports & Memory Expansion
Part No. EA7-S6M
Gasket
Mounting Clip (2) places
8.047 [204.4]
6.140 [156.0]
7.402 [188.0]
1.500 [38.1]
0.197 [5.0]
5.458 [138.6]
Dimensions
7.460[189.5]
CUTOUT
0.866 [22.0]
5.512[140.0]
0.866 [22.0]
0.591 [15.0]
6.413 [162.9]
Bezel Outline
Cutout Outline
0.294 [7.5]
0.591 [15.0]
0.294 [7.5]
0.315 [8.0]
0.315 [8.0] Units: inches[mm]
Mounting Clip (2) places
Mounting Cutout
Features• 5.7" diagonal color STN (Super Twisted
Nematic) LCD display with 15 shades ofgray
• 320 x 240 pixel resolution• 150 NITS display brightness• 50,000 hour average backlight lifetime• Analog resistive (1024 X 1024) touch
screen allowing unlimited touch areas• USB port B (program/download) and
USB port A (USB device options)• Ethernet 10/100 Base-T port
(program/download & PLC comm)
• Remote Internet Access• Serial PLC interface (RS-232/422/485)• CompactFlash card slot, built-in• Expansion assembly (optional) for
CompactFlash devices (use with optional CF Card Interface Module)
• 24 VDC powered, 110 VAC power adapter(optional)
• Audio Line Out, stereo - requires amplifierand speaker(s)
• 10 MByte project memory• Data logging• 0 to 50°C (32 to 122°F) operating
temperature range• NEMA 4/4X, IP-65 compliant when
mounted correctly, indoor use only• Slim design saves panel space• UL, cUL & CE agency approvals• 2-year warranty from date of purchase
<--->
ULC USR
Function Available Associated Features
Ethernet
USB Compact
Flash Expansion Assembly
Audio Out
Yes
Yes
Yes
Yes
Yes
FTP - Email - Web Server
Data Logging
Data Logging/Project
CF Module & future modules
Speaker/Amplifier Connection
Ethernet Yes Remote access over Internet
PLC DriversSerial Avail.AutomationDirect CLICK YesDirect LOGIC K-sequence YesDirect NET YesModbus (Koyo Addressing) YesAllen-Bradley DF1 Full & Half Duplex YesAllen-Bradley PLC5 DF1 YesAllen-Bradley DH-485 YesAllen-Bradley DF1 Full & Half Duplex- Tag Based * Yes
Modbus RTU YesEntivity Modbus RTU YesGE SNPX (90/30, 90/70),Micro 90, VersaMax Micro) Yes
Omron Host LinkC200 Adapter C500 Yes
Omron FINS (CJ1, CS1) YesMitsubishi FX YesMitsubishi Q02, Q02H, Q06H, Q12H,Q25H Yes
Mitsubishi Q, QnA Serial YesSiemens PPI (S7-200 CPU) YesEthernetDirect LOGIC Ethernet YesModbus TCP/IP YesEntivity Modbus TCP/IP YesAllen-Bradley EtherNet/IP™Server - Generic I/O Messaging* Yes
Allen-Bradley EtherNet/IPClient - Tag Based* Yes
Allen-Bradley EtherNet/IP Client -MicroLogix 1100 & SLC 5/05 vianative Ethernet port; MicroLogix1000, 1100, 1200, 1500 & SLC 5-03,04, 05 via AB ENI Adapter
Yes
Omron FINS YesMitsubishi Q, QnA Ethernet YesSiemens (S7-200 CPU, S7-300 CPU) Yes* ControlLogix™ and CompactLogix™
inches / [mm]
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–36 Operator Interface
C-more 6" STN Color Touch Panel - Full Model
Gasket
Mounting Clip (2) places
8.047 [204.4]
6.140 [156.0]
7.402 [188.0]
1.500 [38.1]
0.197 [5.0]
5.458 [138.6]
7.460[189.5]
CUTOUT
0.866 [22.0]
5.512[140.0]
0.866 [22.0]
0.591 [15.0]
6.413 [162.9]
Bezel Outline
Cutout Outline
0.294 [7.5]
0.591 [15.0]
0.294 [7.5]
0.315 [8.0]
0.315 [8.0] Units: inches[mm]
Mounting Clip (2) places
Features• 5.7" diagonal color STN (Super Twisted
Nematic) LCD display with 256 colors• 320 x 240 pixel resolution• 200 NITS display brightness• 50,000 hour average backlight lifetime• Analog resistive (1024 X 1024) touch
screen allowing unlimited touch areas• USB port B (program/download) and
USB port A (USB device options)• Ethernet 10/100 Base-T port
(program/download & PLC comm)
• Remote Internet Access• Serial PLC interface (RS-232/422/485)• CompactFlash card slot, built-in• Expansion assembly (optional) for
CompactFlash devices (use with optional CF Card Interface Module)
• 24 VDC powered, 110 VAC power adapter(optional)
• Audio Line Out, stereo - requires amplifierand speaker(s)
• 10 MByte project memory• Data logging• 0 to 50°C (32 to 122°F) operating
temperature range• NEMA 4/4X, IP-65 compliant when
mounted correctly, indoor use only• Slim design saves panel space• UL, cUL & CE agency approvals• 2-year warranty from date of purchase
The C-more 6” STN color full featured touch panel uses a 5.7" diagonal analog (1024 X1024) touch screen with a 320 x 240 (QVGA) pixel resolution STN LCD (liquid crystaldisplay) with 256 colors. C-more 6” touch panels can be directly mounted into EZTouch6” slim touch panel cutouts. Use the optional 6” Adapter Plate (EA-6-ADPTR) to retrofit C-more 6” touch panels into EZTouch 6” non-slim (wide bezel) touch panel cutouts.
USB A(Device Options)
USB B(Programming/
Download)
For Future Use
Audio Line Out
PLC SerialCommunications
PWR
CPU
TxD
RxD
IOIOI–PLC
BATT
DC Power Label
Product Label
Ethernet 10/100 Base-T(PLC Communications,Programming/Download)
CF Slot #1(Top of Panel)
Optional ExpansionAssembly Location
Part No. EA7-S6C
Dimensions
Mounting Cutout Ports & Memory Expansion
<--->
ULC USR
Function Available Associated Features
Ethernet
USB Compact
Flash Expansion Assembly
Audio Out
Yes
Yes
Yes
Yes
Yes
FTP - Email - Web Server
Data Logging
Data Logging/Project
CF Module & future modules
Speaker/Amplifier Connection
Ethernet Yes Remote access over Internet
* ControlLogix™ and CompactLogix™
PLC DriversSerial Avail.AutomationDirect CLICK YesDirect LOGIC K-sequence YesDirect NET YesModbus (Koyo Addressing) YesAllen-Bradley DF1 Full & Half Duplex YesAllen-Bradley PLC5 DF1 YesAllen-Bradley DH-485 YesAllen-Bradley DF1 Full & Half Duplex- Tag Based * Yes
Modbus RTU YesEntivity Modbus RTU YesGE SNPX (90/30, 90/70),Micro 90, VersaMax Micro) Yes
Omron Host LinkC200 Adapter C500 Yes
Omron FINS (CJ1, CS1) YesMitsubishi FX YesMitsubishi Q02, Q02H, Q06H, Q12H,Q25H Yes
Mitsubishi Q, QnA Serial YesSiemens PPI (S7-200 CPU) YesEthernetDirect LOGIC Ethernet YesModbus TCP/IP YesEntivity Modbus TCP/IP YesAllen-Bradley EtherNet/IP™Server - Generic I/O Messaging* Yes
Allen-Bradley EtherNet/IPClient - Tag Based* Yes
Allen-Bradley EtherNet/IP Client -MicroLogix 1100 & SLC 5/05 vianative Ethernet port; MicroLogix1000, 1100, 1200, 1500 & SLC 5-03,04, 05 via AB ENI Adapter
Yes
Omron FINS YesMitsubishi Q, QnA Ethernet YesSiemens (S7-200 CPU, S7-300 CPU) Yes
inches / [mm]
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–37
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
C-more 6" TFT Color Touch Panel - Full Model
The C-more 6” TFT color full featured touch panel uses a 5.7" diagonal analog (1024 X1024) touch screen with a 320 x 240 (QVGA) pixel resolution TFT LCD (liquid crystaldisplay) with 65K colors. C-more 6” touch panels can be directly mounted into EZTouch6” slim touch panel cutouts. Use the optional 6” Adapter Plate (EA-6-ADPTR) to retrofitC-more 6” touch panels into EZTouch 6” non-slim (wide bezel) touch panel cutouts.
Part No. EA7-T6C
7.460[189.5]
CUTOUT
0.866 [22.0]
5.512[140.0]
0.866 [22.0]
0.591 [15.0]
6.413 [162.9]
Bezel Outline
Cutout Outline
0.294 [7.5]
0.591 [15.0]
0.294 [7.5]
0.315 [8.0]
0.315 [8.0] Units: inches[mm]
Mounting Clip (2) places
Mounting Cutout
USB A(Device Options)
USB B(Programming/
Download)
For Future Use
Audio Line Out
PLC SerialCommunications
PWR
CPU
TxD
RxD
IOIOI–PLC
BATT
DC Power Label
Product Label
Ethernet 10/100 Base-T(PLC Communications,Programming/Download)
CF Slot #1(Top of Panel)
Optional ExpansionAssembly Location
Gasket
Mounting Clip (2) places
8.047 [204.4]
6.140 [156.0]
7.402 [188.0]
1.500 [38.1]
0.197 [5.0]
5.458 [138.6]
Dimensions
Features• 5.7" diagonal color TFT (Thin Film
Transfer) LCD display with 65K colors• 320 x 240 pixel resolution• 270 NITS display brightness• 50,000 hour average backlight lifetime• Analog resistive (1024 X 1024) touch
screen allowing unlimited touch areas• USB port B (program/download) and
USB port A (USB device options)• Ethernet 10/100 Base-T port
(program/download & PLC comm)
• Remote Internet Access• Serial PLC interface (RS-232/422/485)• 1 GByte CompactFlash card slot, built-in• Expansion assembly (optional) for
CompactFlash devices (use with optional CF Card Interface Module)
• 24 VDC powered, 110 VAC poweradapter (optional)
• Audio Line Out, stereo - requires ampli-fier and speaker(s)
• 10 MByte project memory• Data logging• 0 to 50°C (32 to 122°F) operating
temperature range• NEMA 4/4X, IP-65 compliant when
mounted correctly, indoor use only• Slim design saves panel space• UL, cUL & CE agency approvals• 2-year warranty from date of purchase
<--->
ULC USR
Function Available Associated Features
Ethernet
USB Compact
Flash Expansion Assembly
Audio Out
Yes
Yes
Yes
Yes
Yes
FTP - Email - Web Server
Data Logging
Data Logging/Project
CF Module & future modules
Speaker/Amplifier Connection
Ethernet Yes Remote access over Internet
Ports & Memory Expansion* ControlLogix™ and CompactLogix™
PLC DriversSerial Avail.AutomationDirect CLICK YesDirect LOGIC K-sequence YesDirect NET YesModbus (Koyo Addressing) YesAllen-Bradley DF1 Full & Half Duplex YesAllen-Bradley PLC5 DF1 YesAllen-Bradley DH-485 YesAllen-Bradley DF1 Full & Half Duplex- Tag Based * Yes
Modbus RTU YesEntivity Modbus RTU YesGE SNPX (90/30, 90/70),Micro 90, VersaMax Micro) Yes
Omron Host LinkC200 Adapter C500 Yes
Omron FINS (CJ1, CS1) YesMitsubishi FX YesMitsubishi Q02, Q02H, Q06H, Q12H,Q25H Yes
Mitsubishi Q, QnA Serial YesSiemens PPI (S7-200 CPU) YesEthernetDirect LOGIC Ethernet YesModbus TCP/IP YesEntivity Modbus TCP/IP YesAllen-Bradley EtherNet/IP™Server - Generic I/O Messaging* Yes
Allen-Bradley EtherNet/IPClient - Tag Based* Yes
Allen-Bradley EtherNet/IP Client -MicroLogix 1100 & SLC 5/05 vianative Ethernet port; MicroLogix1000, 1100, 1200, 1500 & SLC 5-03,04, 05 via AB ENI Adapter
Yes
Omron FINS YesMitsubishi Q, QnA Ethernet YesSiemens (S7-200 CPU, S7-300 CPU) Yes
inches / [mm]
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–42 Operator Interface
C-more Communication Ports
For Future Use
Audio Line Out, stereo, 1 Volt rms, 3.5mm Mini Jack
(Amplifier Required)
USB Port - Type B Programming/Download USB Port - Type A
USB Device Options
Ethernet 10/100 Base-T PLC Communications,
Programming/Download
1 8 2 1 3 4 2 1
3 4
8 1
15 9
Pin Signal
1 Frame GND
TXD (232C)
RXD (232C)
Future
2
3
4
5 Logic GND
Pin Signal Pin Signal
6 LE
CTS (232C)
RTS (232C)
RXD+ (422/485)
7
8
9
10 RXD– (422/485)
11 TXD+ (422/485)
TXD– (422/485)
Term. Resistor
do not use
12
13
14
15 do not use
Pin Signal
1 TD+
TD–
RD+
do not use
2
3
4
Pin Signal
5 do not use
RD–
do not use
do not use
6
7
8 Pin Signal
1 Vbus
D–
D+
GND
2
3
4
Pin Signal
1 Vbus
D–
D+
GND
2
3
4
Shield Shell
PLC Serial Communications
Network Activity LED (Orange)
On Active Network Data
Network Idle Off
Link Status LED (Green)
On Ethernet Linked
No Ethernet Comm. Off
Bottom View
Note: Device is not available on Base Feature touch panels, part numbers EA7-S6M-R and EA7-S6C-R.
Compact Flash memory slot #1 is located at the top of panel.
Note: Use USB Programming Cable, p/n USB-CBL-AB15.
ShieldSHELL
Ethernet PortThe Ethernet port has several uses:
• Download program to panel• Communicate to PLCs/PCs• Send e-mail• Access FTP server• Act as a Web server• Remote Internet Access
The Ethernet port has an RJ-45 8-wiremodular connector with green and orangeLEDs.
• The orange LED indicates the Ethernetcommunication status. It illuminates whenthere is data activity on the network.
• The green LED indicates link status andilluminates when a link is established.
Ethernet connections to PLCs/PCs:• DirectLOGIC Ethernet• Modbus TCP/IP• Allen-Bradley EtherNet/IP™ Server -
Generic I/O Messaging (ControlLogix™,CompactLogix™, and FlexLogix™)
• Allen-Bradley EhterNet/IP Client -Tag Based (ControlLogix, CompactLogix,and FlexLogix™)
• Allen-Bradley EhterNet/IP Client -MicroLogix 1100 & SLC 5/05, both vianative Ethernet port
• Allen-Bradley MicroLogix 1000, 1100, 1200,1500, SLC 5-03/04/05, all via ENI Adapter
• Entivity Modbus TCP/IP• Omron Ethernet FINS• Siemens Ethernet ISO over TCP
Note: The base panels (-R part numbers)do not include an Ethernet port, and do
Sound Interface (Audio Line Out)When attached to an amplifier andspeaker(s), C-more can play warningsounds or pre-recorded messages suchas: "conveyor is jammed". C-moresupports WAV type files. The output is stereo.
PLC PortThe PLC port is an RS-232, RS-422 or RS-485 female 15-pin D-sub connector. Usethis port for serial connections to PLCs.The port supports the following PLC proto-cols:
All AutomationDirect.com PLCs:DirectLOGIC K-sequenceDirectNETModbus (Koyo Addressing)CLICK
Allen Bradley:DF1 Full & Half DuplexDF1 Full & Half Duplex - Tag BasedPLC5 DF1DH485
Modbus RTUEntivity Modbus RTUGE SNPX (90/30, 90/70, Micro 90,
VersaMax Micro)Omron:
Host Link (C200 Adapter, C500)FINS (CJ1, CS1)
Mitsubishi:Melsec FXQ/QnA
Siemens PPI (S7-200 CPU)
USB Port BProgram C-more via the USB program-ming port. It's fast and easy, with no baudrate settings, parity, or stop bits to worryabout. We stock standard USB cables foryour convenience. USB Port B can be usedto upload or download projects to andfrom a PC.
USB Port AThe Universal Serial Bus (USB) Port A is astandard feature for all models and canbe used to connect various USB HID(Human Input Device) devices to thepanel, such as:
• USB pen drives, (SDCZ4-2048-A10)• USB keyboards• USB barcode scanners• USB card scanners
C-more can log data to the USB pen driveas well as load projects to the panel fromthe pen drive. You can also back upproject files and panel firmware.
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–43
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
C-more PLC Comm Protocols & CablesPLC Compatibility Table
PLC Family Model Protocols
Allen-Bradley
MicroLogix 1000/1100/1200/1500,SLC 5-/01/02/03, PLC5 DH485/AIC/AIC+
MicroLogix 1000, 1100, 1200 and 1500DF1 Half Duplex; DF1 Full DuplexSLC 5-/03/04/05
ControlLogix™, CompactLogix™, FlexLogix™PLC-5 DF1 Full DuplexControlLogix, CompactLogix, FlexLogix - Tag Based DF1 Half Duplex; DF1 Full DuplexControlLogix, CompactLogix, FlexLogix -Generic I/O Messaging EtherNet/IP Server
ControlLogix, CompactLogix, FlexLogix - Tag Based
EtherNet/IP ClientMicroLogix 1100 & SLC 5/05,both via native Ethernet portMicroLogix 1000, 1100, 1200, 1500 & SLC 5-03/04/05,all via ENI Adapter
Modbus TCP/IP Modbus TCP/IP devices Modbus TCP/IPGE 90/30, 90/70, Micro 90, VersaMax Micro SNPX
Mitsubishi
FX Series FX DirectQ02, Q02H, Q06H, Q12H, Q25H Q CPUQ, QnA Serial QnA SerialQ, Qna Ethernet QnA Ethernet
OmronC200 Adapter, C500 Host LinkCJ1/CS1 Serial, CJ1/CS1 Ethernet FINS
Modicon 984 CPU, Quantum 113 CPU, AEG Modicon MicroSeries 110 CPU: 311-xx, 411-xx, 512-xx, 612-xx Modbus RTU
SiemensS7-200 CPU, RS-485 Serial PPIS7-200 CPU, S7-300 CPU; Ethernet Ethernet ISO over TCP
CLICK all AutomationDirect Modbus (CLICK)
DirectLOGIC
DL05/DL06all
K-SequenceDirect NETModbus (Koyo addressing)
H0-ECOM/H0-ECOM100 Direct LOGIC EthernetDL105 all K-Sequence
DL205
D2-230 K-Sequence
D2-240K-SequenceDirect NET
D2-250/D2-250-1/D2-260K-SequenceDirect NETModbus (Koyo addressing)
D2-240/D2-250-1/D2-260Using DCM
Direct NETModbus (Koyo addressing)
H2-ECOM/H2-ECOM100 Direct LOGIC Ethernet
DL305
D3-330/330P(Requires the use of a DataCommunications Unit)
Direct NET
D3-340 Direct NET
D3-350K-SequenceDirect NETModbus (Koyo addressing)
D3-350 DCMDirect NETModbus (Koyo addressing)
DL405
D4-430K-SequenceDirect NET
D4-440K-SequenceDirect NET
D4-450K-SequenceDirect NETModbus (Koyo addressing)
All with DCMDirect NETModbus (Koyo addressing)
H4-ECOM/H4-ECOM100 Direct LOGIC EthernetH2-WinPLC (Think & Do) Live V5.2 or later and Studio any version
Think & Do Modbus RTU(serial port)
H2-WinPLC (Think & Do) Live V5.5.1 or later andStudio V7.2.1 or later
Think & Do Modbus TCP/IP(Ethernet port)
NOTE: EZTouch serial PLCcommunication cables arecompatible with C-moretouch panels.
EA-2CBL
EA-2CBL-1
CableDescription
CablePart Number Price
AutomationDirect CLICK,Direct LOGIC PLC RJ-12 port,DL05, DL06, DL105, DL205,D3-350, D4-450 &H2-WinPLC (RS-232C)
EA-2CBL <--->
Direct LOGIC (VGA Style)15-pin port, DL06, D2-250(250-1), D2-260 (RS-232C)
EA-2CBL-1 <--->
Direct LOGIC PLC RJ-11 port,D3-340 (RS-232C) EA-3CBL <--->
Direct LOGIC DL405 PLC15-pin D-sub port, DL405(RS-232C)
EA-4CBL-1 <--->
Direct LOGIC PLC 25-pin D-subport, DL405, D3-350, DL305DCU and all DCM’s (RS-232C)
EA-4CBL-2 <--->
Allen-Bradley MicroLogix 1000,1100, 1200 & 1500(RS-232C)
EA-MLOGIX-CBL <--->
Allen-Bradley SLC 5-03/04/05ControlLogix, CompactLogix,FlexLogix, DF1 port (RS-232C)
EA-SLC-232-CBL <--->
Allen-Bradley PLC-5DF1 port(RS-232C)
EA-PLC5-232-CBL <--->
Allen-Bradley SLC 500DH485 port(RS-485A)
EA-DH485-CBL <--->
GE 90/30, 90/70, Micro 90,VersaMax Micro15-pin D-sub port (RS-422A)
EA-90-30-CBL <--->
MITSUBISHI FX Series25-pin port(RS-422A)
EA-MITSU-CBL <--->
MITSUBISHI FX Series8-pin mini-DIN(RS-422A)
EA-MITSU-CBL-1 <--->
OMRON Host LinkC200 Adapter, C500(RS-232C)
EA-OMRON-CBL <--->
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–44 Operator Interface
Using the C-more Programming Software for project development, the touch panel canbe connected to a PC (personal computer) in one of several ways:
• Connect a USB Programming Cable (USB-CBL-AB15) from a USB port type A on the PC to theUSB type B programming port on the C-more touch panel. The USB connection is for directconnection only and does not support USB hubs.
• Connect the C-more touch panel to a PC via an Ethernet hub or switch, and CAT5 Ethernetcables (full feature panels only). Multiple panels can be programmed in this configuration.
• Use an Ethernet crossover cable directly between the C-more touch panel’s Ethernet port andthe PC Ethernet port (full feature panels only).
Following are the minimum system requirements for running C-more ProgrammingSoftware, p/n EA-PGMSW, on a PC:
• Personal Computer with a 333 MHz or higher processor (CPU) clock speed recommended;(Windows® 2000 with Service Pack 4 or Windows® XP, 800 MHz or higher processor (CPU) clockspeed recommended (Windows® Vista (32 bit)); Intel® Pentium/Celeron family, or AMD®K6/Athlon/Duron family, or compatible processor recommended
• Keyboard and Mouse or compatible pointing device• Super VGA color video adapter and monitor with at least 800 x 600 pixels resolution
(1024 x 768 pixels recommended) 64K color minimum• 300 MB free hard-disk space• 128 MB free RAM (512 MB recommended); 512 MB free RAM (1 GB recommended) for Vista• CD-ROM or DVD drive for installing software from the CD• USB port or Ethernet 10/100 Mbps port for project transfer from software to touch panel
(Ethernet port not available on -R models)• Operating System - Windows® Vista, Windows® XP Home / Professional Edition or Windows®
2000 with Service Pack 4.
C-moreTouch Panel
(Bottom View)
EthernetPort
Ethernet CAT5Cable - Crossover
EthernetPort
PC
1 C-more Touch Panel
(Bottom View)
Ethernet Port
Ethernet CAT5 Cable - Straight-thru
Ethernet Port
Stride™Ethernet Switch10/100 Base-T
PC
C-moreTouch Panel
USB Port – Type B
Programming/Download
USB Port –
Type A
PC
USB-CBL-AB15
USB Connectivity
Ethernet Connectivity via a Hub or Switch
Ethernet Direct ConnectionThe Ethernet Configuration Kit includes afive-port 10/100 Base-T Ethernet switch,four straight-through cables, and onecrossover cable. (The cables are at least fivefeet in length.) The kit provides a greatconvenience for configuring systems,demonstration systems or basic control proj-ects using Ethernet.
Message in froma device
Message is sentout only from theport connected todestination device
Part No. SE-SW5U
Stride™Ethernet Switch
EthernetConfiguration Kit
USB Programming Cable
Part No. USB-CBL-AB15
C-moreComputer Programming Connections
<--->
<--->
Other lengths available see USB-CBL-AB3, USB-CBL-AB6,
USB-CBL-AB10 on page 9-27
Part No. RT-CNFGKIT
<--->
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–45
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
Providing Power to the Touch Panel• Connect a dedicated 24 VDC switching power supply rated for a minimum of 1.5 Amps to the DC connector on the rear of the
C-more touch panel. Connect the ground terminal to a proper equipment ground.• or, install a C-more AC Power Adapter (EA-AC) to the rear of the touch panel and connect an AC voltage source of 100-240 VAC,
50/60Hertz, to its AC connector. • then, turn on the power source and check the LED status indicators on the rear of the C-more touch panel for proper operation.
100 - 240 VAC50/60 Hz
AC Power AdapterNot recommended for use with the EA7-T15Cwhen operating temperatures are expectedto be above 40 deg C.
Recommended AC Supply Fuse 3.0 A time delay, ADC p/n MDL3
PWR
CPU
TxD
RxDBATT
IOlOl–PLC
Power LED (Green)
On Power On
Power OffOff
Serial TxD/RxD LED (Green)
On Comm. is active
No communicationOff
CPU Status LED (Green, Orange & Red)
Off Power Off
Normal – CPU Run StateGreen
Red Memory Error
Operating System not foundBlinkingRed
BlinkingOrange LCD Backlight Failure
Rear View
C-more LED Status Indicators
BlinkingGreen Power Loss Detection
AC Wiring
WARNING: To minimize the riskof potential safety problems, you shouldfollow all applicable local and nationalcodes that regulate the installation andoperation of your equipment. These codesvary from area to area and it is yourresponsibility to determine which codesshould be followed, and to verify that theequipment, installation, and operation arein compliance with the latest revision ofthese codes.
Equipment damage or serious injury to
personnel can result from the failure tofollow all applicable codes and standards.We do not guarantee the productsdescribed in this publication are suitable foryour particular application, nor do weassume any responsibility for your productdesign, installation, or operation.
If you have any questions concerning theinstallation or operation of this equipment,or if you need additional information,please call us at 1-800-633-0405 or 770-844-4200.
This publication is based on informationthat was available at the time it was printed.At Automationdirect.com® we constantlystrive to improve our products and services,so we reserve the right to make changes tothe products and/or publications at anytime without notice and without obligation.This publication may also discuss featuresthat may not be available in certain revisions of the product.
C-more Power Connection Wiring
PWR
CPU
BATT
24 VDC, -15%, +20%(20.4 - 28.8 VDC)
+
–
GND
EquipmentGround
Recommended DC Supply FusePanel Size
6“ – 10”12“ & 15”
2.5 A4.0 A
MDL2-5MDL4
Rating ADC p/n
DC Wiring
AC PowerAdapter EA-AC
Recommended Power Supply:AutomationDirect Part No. PS24-050D
Tightening TorquePower supply cable torque 71 - 85 oz-in (0.5 - 0.6 Nm)Power connector mounting torque 71 - 85 oz-in (0.5 - 0.6 Nm)Mounting flange screw torque 57 - 71 oz-in (0.4 - 0.5 Nm)
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–46 Operator Interface
AC/DC Power Adapter: EA-AC
CompactFlashMemory Card:EA-CF-CARD
FC
CF Card Interface Module: EA-CF-IF
Expansion Assembly: EA-EXP-OPT
6 inch Adapter Plate: EA-6-ADPTR (Used to retrofit new C-more 6” touch panel into existing EZTouch non-slim panel cutout.)
Non glare 15 inch screen cover: EA-15-COV2 (pk of 3)
D-SUB 15 pin 90 degree Comm Port Adapter: EA-ADPTR-4
D-SUB 15 pin to Terminal Block Adapter: EA-COMCON-3
Non glare 12 inch screen cover: EA-12-COV2 (pk of 3)
Non glare 10 inch screen cover: EA-10-COV2 (pk of 3)
Non glare 8 inch screen cover: EA-8-COV2 (pk of 3)
Non glare 6 inch screen cover: EA-6-COV2 (pk of 3)
USB Pen Drive, 2GB: SDCZ4-2048-A10
Part Number Description Price
EA-AC
The AC/DC Power Adapter, EA-AC,is for C-more touch panels only,and is powered from a 100-240VAC, 50/60 Hertz power source. Theadapter provides 24 VDC @ 1.5 A.Power Fault features help protectdata being logged to CompactFlashduring power failures. The C-morepanel must have firmware version1.21 Build 6.18E or higher forproper operation.
<--->
EA-EXP-OPTC-more I/O Module ExpansionAssembly, used to hold secondaryCompactFlash Adapter (EA-CF-IF)and future option modules
<--->
EA-CF-IF
CompactFlash Card AdapterModule, used when addingsecondary CompactFlash option toExpansion Assembly. Compatiblewith EA-CF-CARD Compact-Flashmemory card accessory.
<--->
EA-CF-CARD512 MB CompactFlash MemoryOption, industrial grade, high speedmemory for non-volatile storage.
<--->
EA-6-ADPTR
6-inch mounting adapter plate,REQUIRED to mount a 6 inchC-more touch panel into enclosureswith legacy wide-bezel EZTouchcutouts. Converts a 8.932 inch x6.223 inch cutout to 7.522 inch x5.625 inch cutout.
<--->
EA-ADPTR-4D-SUB 15-pin 90 degree PLC serialcommunication port adapter (allowsa PLC communication cable to beplugged in at a 90 degree angle toreduce panel depth requirements)
<--->
EA-COMCON-3D-SUB 15-pin to 6-terminal PLCserial communication port adapterto allow wire terminal connectionsfor RS-422/485 PLC communica-tion cable.
<--->
EA-6-COV2Non Glare 6 Inch Screen Cover,protective overlay used to protectthe touch screen while helping toreduce the glare from external lightsources. (pk of 3)
<--->
EA-8-COV2Non Glare 8 Inch Screen Cover,protective overlay used to protectthe touch screen while helping toreduce the glare from external lightsources. (pk of 3)
<--->
EA-10-COV2Non Glare 10-Inch Screen Cover,protective overlay used to protectthe touch screen while helping toreduce the glare from external lightsources. (pk of 3)
<--->
EA-12-COV2Non Glare 12-Inch Screen Cover,protective overlay used to protectthe touch screen while helping toreduce the glare from external lightsources. (pk of 3)
<--->
EA-15-COV2Non Glare 15-Inch Screen Cover,protective overlay used to protectthe touch screen while helping toreduce the glare from external lightsources. (pk of 3)
<--->
SDCZ4-2048-A10
USB Pen Drive, 2GB, SanDiskCruzer micro Pen Drive. Compatiblewith Windows 98SE, ME, 2000, XPand Mac OS 9.1.x+, OS X 10.1.2+Certified Windows XP and Mac OSX. Contains Unit, sleeve and protec-tive cap, lanyard and keychain loop.Recommended for use with theC-more Operator Touch Panels.
<--->
Accessories at a glance:
AccessoriesThe C-more touch panels can be enhanced withthe accessories below:
NOTE: Refer to the individualproduct data sheets that areincluded with the accessoriesfor additional information.
EXPANSION ASSEMBLYEA-EXP-OPT
CF CARDINTERFACE MODULE
EA-CF-IF
COMPACT-FLASHMEMORY CARDEA-CF-CARD
AC/DC POWER ADAPTEREA-AC C-more
TOUCH PANEL
NOTE: CompactFlash memorycard designations – CF Slot #1is at the top of the panel andCF Slot #2 is the CF CardInterface Module, p/n EA-CF-IF.CF card plugs
into slot #1at top of panel.
CF card interfacemodule installsin right slot only,left slot for future.
Accessory Locations
C-more Accessories
USB PEN DRIVESDCZ4-2048-A10
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–47
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
C-more Accessories
3.661[93.0]
3.001[76.2]
0.579[14.7]
1.421 ±0.02
[36.1 ±0.5]
Screw
ScrewAC Power Label
BOTTOM VIEW
FRONT VIEW SIDE VIEWAC PowerConnector
DC PowerConnector
Units: inches [mm]
AC/DC Power AdapterThe AC/DC Power Adapter provides dedicated DC power to thepanel if using 110 VAC as a power source. The AC/DC PowerAdapter provides some features that a normal DC power supplycannot provide. The adapter provides a power loss signal to thetouch panel that can be used to track power outages. This
signal also allows the touch panel by way of a timed sequenceto stop writing data to CompactFlash memory devices providinga controlled shutdown for increased data logging reliability.
Part No. EA-AC
Units: inches[mm]
X.XXX[XX.X]
EA7-S6M-R = 2.921 [74.2]EA7-S6C-R = 2.921 [74.2]EA7-S6M = 2.921 [74.2]EA7-S6C = 2.921 [74.2]EA7-T6C = 2.921 [74.2]EA7-T8C = 3.157 [80.2]EA7-T10C = 3.106 [78.9]EA7-T12C = 3.102 [78.8]EA7-T15C = 3.075 [78.1]
Overall Panel Depthw/ EA-AC Installed
Dimensions
AC/DC Power Adapter Specifications
Part Number EA-AC Static Electricity DischargeResistance
Compliant with IEC61000-4-2,Contact: 4 kV, Air: 8 kV
Input Voltage & Frequency 100-240 VAC; 50/60 Hertz Agency Approvals UL508, cUL, CE, EMC EN61132-2
Voltage Range 85-264 VAC w/ Under Voltage andOver Voltage Shutdown Environment No corrosive gas or conductive dust
Permissible MomentaryPower Failure Within 40 ms Grounding Ground resistance: less than 100 ohm
Input Power 68 VA or less Dimensions - inches [mm]3.00” (H) x 3.66” (W) x 1.42” (D)[76.2 mm x 93.0 mm x 36.1 mm](Excluding DC Power Connector.)
Operating TemperatureRange
0 °C to 50 °C [32 to 122 °F] (For the EA7-T15Ctouch panel, maximum temperature is 40° C [104 °F] for the power adapter.)
Weight 6.13 oz. [175 g]
Storage Temperature Range -20 to 60 °C [-4 to 140 °F] Cooling Method Natural convection when installed onvertically mounted touch panel.
Operating & StorageHumidity 10-85% RH (non-condensing) Included Parts AC Power Connector, Data Sheet Insert
Noise Immunity 1000 VAC p-p (Pulse width 1 µs, rise time: 1 ns),with proper ground connection on AC terminal block.
Removable AC PowerConnector
EA-AC-CON or DECA Switchlab MC101-508-03GSecure with (2) captive M2.5 screws,torque to 70 oz-in [0.5 Nm]
Hi-Pot 1000 VAC, 1 minute, with proper ground connectionon AC terminal block. Output Voltage and Ripple 21.6 - 26.4 VDC, Ripple < 100 mV p-p
Insulation Resistance 500 VDC, 10 M ohm or above, with proper groundconnection on AC terminal block. Output Current Maximum 1.5 A
Vibration Compliant with IEC61131-2 Inrush Current For 100 VAC: 15 A, 3 ms or lessFor 240 VAC: 20 A, 3 ms or less
Shock Pulse shape: Sine half wave, Peak acceleration:147 m/s2 (15 G), X, Y, Z: 3 directions, 2 times each
Power Fail DetectionVoltage 58 VAC ±5%
Thermal Protection 140 °C [284 °F], with autorecovery Mounting to Touch Panel Secure with (2) spring loaded captive M3-20 screws,torque to 50 oz-in [0.35 Nm]
Short Circuit Protection 85 VAC: 2.6 A, 100 VAC: 2.8 A, 264 VAC: 3.9 A
NOTE: The AC/DC Power Adapter is not recommended for use with the EA7-T15C touch panelwhen operating temperatures are expected to exceed 40 °C [104 °F].
NOTE: Power Fault features help protectdata being logged to CompactFlash duringpower failures. The C-more touch panelmust have firmware version 1.21 Build6.18E or higher for proper operation.
<--->
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–48 Operator Interface
C-more Accessories
2.165[55.0]
2.067[52.5]
1.618[41.1]
3.567[90.6]
0.459[11.7]
Connector Cover
Screw
Units: inches [mm]
Expansion Assembly
2.122[53.9]
3.024[76.8]
0.780[19.8]
Product Label
EA-CF-IF
Units: inches [mm]
CF Card Interface ModuleThe C-more CF Card Interface Module is used with the ExpansionAssembly to allow use of standard CompactFlash cards, such as theCompactFlash Memory (EA-CF-CARD). The CF card can be usedfor data logging or as project backup.
The C-more Expansion Assembly allows installation of the optionalCF Card Interface Module (shown below) for CF card use and alsoprovides a slot for future option modules. Although the fullfeatured models have a built-in CompactFlash slot, some usersmay require additional CF memory for data logging.
<--->
<--->
Part No. EA-EXP-OPT
Part No. EA-CF-IF
X.XXX[XX.X]
Units: inches[mm]
EA7-S6M = 2.921 [74.2]EA7-S6C = 2.921 [74.2]EA7-T6C = 2.921 [74.2]EA7-T8C = 3.157 [80.2]EA7-T10C = 3.106 [78.9]EA7-T12C = 3.102 [78.8]EA7-T15C = 3.075 [78.1]
Overall Panel Depthw/ EA-EXP-OPT
Installed
Dimensions
Dimensions
The optional Expansion Assembly can be installed on the rearof all but the 6-inch base models. This attachable assemblycurrently allows installation of an additional CompactFlashcard with the use of the CF Card Interface Module. Moreoptions will be available in the future.
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–49
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
512 MB CompactFlash Memory CardEA-CF-CARD is a 512 MB high speed industrial gradeCompactFlash memory card for non-volatile storage. Its 85 °Coperating temperature makes it perfect for data logging inindustrial applications (recommended for C-more touchpanels). This is a standard “off the shelf” CompactFlash.
<--->
Part No.EA-CF-CARD
USB Pen Drive
C-more Accessories
Part No.SDCZ4-2048-A10
<--->
The SanDisk Cruzer Micro is an extremely small 2GB USB Flash Drive(UFD) that connects to a USB port. Users can easily store their loggingdata, project data, key documents and images on a Cruzer Micro andtransfer them to another computer with a USB port.
Includes software for data encryption (CruzerLock 2)*, and trial version forback-up (PocketCache)*, and Outlook synchronization (CruzerSync)*.
Specifications/Features:• Dimensions: 7.9 mm x 18.95 mm x 52.2 mm (H x W x L)• Stylish, metal casing with changeable colored skins and caps **• Includes CruzerLock 2 for data security*, and trial versions of PocketCache
(back-up)* and CruzerSync (Outlook & My Documents folder synchronization)software*
• Hi-Speed USB 2.0 certified (backwards compatible with all USB 1.1 ports)• Compatible with Windows 98SE, ME, 2000, XP and Mac OS 9.1.x+, OS X
v10.1.2+• Certified Windows XP and Mac OS X
Cruzer Micro Package Contents:• Cruzer Micro Skins (with clear skin and cap)• 2 additional colored skins w/matching caps **• Lanyard• Quick Start Guide
* For Windows only
** Available for new version of Cruzer Micro with Skins only
Specifications/Features:
• CompactFlash™ Compatibility• W/E Endurance 100,000 cycles• Data transfer rate: 16 MB/second • Operating Temp: -13 to 185°F ( -25 to 85°C )• Operating Humidity 85% max, non-condensing• Storage Temp: -13 to 194 °F ( -25 to 90°C )• Storage Humidity 95% max, non-condensing
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–50 Operator Interface
C-more Accessories
8.932[226.9]
7.299[185.4]
Adapter Gasket
0.618[15.7]
0.118 ±0.04
[3.0 ±1.0]
Units: inches[mm]
Centerline
Side ViewFront View Rear View
M4ThreadInsert
(6 places)
8.076 ±0.02
[205.1 ±0.5]4.250 ±0.02
[108.0 ±0.5]
6.223 ±0.02
[158.1 ±0.5]
6” Adapter PlateThe adapter plate simplifies the retrofit of a new C-more 6” touchpanel into an existing cabinet cutout for an EZTouch 6” widebezel touch panel, such as our part number EZ-S6C-K, EZ-S6C-F, EZ-S6M-R or EZ-S6M-F. A NEMA 4/4X gasket is
included. Please note that all sizes of the C-more touch panelshave the same cutout as similarly sized EZTouch thin bezel (slim)touch panels, allowing quick replacement.
8.076[205.1]
6.222[158.0]
5.624[142.8]
3.111[79.0]
3.761[95.5]
4.250[108.0]
2.125[54.0]
0.837[21.3]
0.218 Dia.[5.5]
(6 places)
7.522[191.1]
Units: inches [mm]
0.705[17.9]
0.705[17.9]
2.812[71.4]
Adapter PlateOutline
Centerline
0.837[21.3]
CUTOUT
Enclosure
DIN MountingClips
C-moreAdapter Plate
6“ C-moreTouch Panel
Two sets of mounting screws provided:Set A - M4-8 metric screws for an enclosurethickness range of 0.02-0.118 inch [0.5-3mm]Set B - M4-10 metric screws for an enclosurethickness range of 0.118-0.197 inch [3-5mm]Mounting screw torque: 100 oz-in [0.7 Nm]
Screw Torque: 100 oz-in [0.7 Nm]
<--->
Dimensions
Part No. EA-6-ADPTR
Cutout Dimensions
Mounting Details
w w w . a u t o m a t i o n d i r e c t . c o m / C - m o r e Operator Interface e10–51
CompanyInfo.
PLCs
Field I/O
Software
C-more & other HMI
AC Drives
AC Motors
PowerTransmiss.
Steppers/Servos
Motor Controls
ProximitySensors
Photo Sensors
Limit Switches
Encoders
CurrentSensors
PressureSensors
Temp.Sensors
Pushbuttons/Lights
Process
Relays/Timers
Comm.
TerminalBlocks & Wiring
Power
CircuitProtection
Enclosures
Tools
Appendix
Part Index
C-more Accessories
D-SUB 15-pin 90-degree Communication Port Adapter
Country of OriginDate code
IOIOI – PLC
1.60
5[4
0.8]
1.873[47.6]
0.793[20.2]
EA-ADPTR-4KOYO ELECTRONICS INDUSTRIES CO., LTD.
Units: inches [mm]
The EA-ADPTR-4 adapter plugs into the 15-pin serial port on the rear of the panel to allow a PLC communication cable to beplugged in at a 90 degree angle to reduce panel depth requirements. 15-pin straight through pin-out. UL Recognized.
D-SUB 15-pin to Terminal Block Adapter
Country of Origin
EA-COMCON-3
GND
SD–
SD+
RD–
RD+
TERM
Date code
1.75
6[4
4.6]
1.873[47.6]
1.126[28.6]
KOYO ELECTRONICS INDUSTRIES CO., LTD.
Units: inches [mm]
The EA-COMCON-3 adapter plugs into the 15-pin serial port on the rear of the panel to allow wire terminalconnections for an RS-422/RS-485/DH-485 PLC communication cable. UL Recognized.
Dimensions
Dimensions
<--->
<--->
Part No.EA-ADPTR-4
Part No.EA-COMCON-3
0.75
1[1
9.1]
0.333[8.5]
0.90
3[2
2.9]
0.687[17.5]
Terminals
GND
SD–
SD+
RD–
RD+
TERM
R
R
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–52 Operator Interface
Non-glare Screen Covers (in packages of 3)
EA-6-COV2 <--->
EA-8-COV2 <--->
EA-10-COV2 <--->
EA-12-COV2 <--->
EA-15-COV2 <--->
C-more Accessories
Part Nos. EA-6-COV2, EA-8-COV2, EA-10-COV2, EA-12-COV2 and EA-15-COV2
The non-glare screen covers are protective overlays used to protect the touch screenwhile helping to reduce the glare from external light sources.
12.563[319.1]
Adhesive
Units: inches [mm]
9.374[238.1]
0.197[5.0]
0.157[4.0]
EA-15-COV2
EA-12-COV2
EA-10-COV2
EA-8-COV2
EA-6-COV2
10.260[260.6]
0.197[5.0]
0.157[4.0]
7.642[194.1]
8.906[226.2]
6.614[168.0]
0.197[5.0]
0.157[4.0]
7.315[185.8]
5.441[138.2]
0.197[5.0]
0.157[4.0]
4.913[124.8]
3.795[96.4]
0.197[5.0]
0.157[4.0] 15”
12”
10”
8”
6”
Dimensions
Installation
NOTE: The Protective Cover ships with a thin protective sheet on theface of the cover that needs to be carefully removed. If your panelis not clear, the protective sheet may not have been removed.
Supported drivers All AutomationDirect.com PLCs and PC based controlK-Sequence (DL05/06/105/205/350/405) DirectNET (DL05/06/105/205/350/405) DirectNET (DL330/340) Modbus (DL05/06/205/350/405) Modbus (CLICK) ECOM Ethernet (DL05/06/205/405) Ethernet Entivity Modbus RTU (H2-WinPLC) Entivity Modbus TCP/IP Ethernet (H2-WinPLC)
Modbus RTU Modbus TCP/IP Ethernet
Allen-Bradley:AB DF1 Full Duplex (MicroLogix) AB DF1 Full Duplex (SLC500) AB DF1 Full Duplex (PLC5) AB DF1 Full Duplex Tag-Based(Control/CompactLogix/FlexLogix) AB DF1 Half Duplex (MicroLogix/SLC500) AB DF1 Half Duplex Tag-Based(Control/CompactLogix/FlexLogix) AB DH485 (MicroLogix/SLC500/AIC) AB EtherNet/IP Client (MicroLogix 1100) AB EtherNet/IP Client (SLC5/05/ENI Adapter) AB EtherNet/IP Client Tag-Based(Control/CompactLogix/FlexLogix) AB EtherNet/IP Server Generic IO Messaging(Control/CompactLogix/FlexLogix)
GE 90/30 and 90/70 SNPX90/30 SNPX (90/30, 90/70, Micro90, VersaMax Micro)
Omron: Host Link Adapter (C200/C500) FINS Serial (CS/CJ) FINS Ethernet (CS/CJ)
Mitsubishi: FX Series CPU FX-1N(C), 2N(C), 3U(C) CPU Q Series (Q02, Q02H, Q06H, Q12H, Q25H CPU) Q/QnA Serial Q/QnA Ethernet
Siemens: S7-200(Serial: PPI) S7-200(Ethernet: ISO over TCP/IP) S7-300(Ethernet: ISO over TCP/IP)
Allen-Bradley Tag ImportImport tags directly from the RSLogix 5000 L5K file. C-moreSoftware now supports direct insertion of ControlLogix,CompactLogix and FlexLogix tags from the PLC into C-more (no mapping or translations required).
1 - 8 0 0 - 6 3 3 - 0 4 0 5e10–26 Operator Interface
FeaturesMore durable- 50,000 hour bulb life- Replaceable bulbs on 8”, 10”, 12”, and 15” modelsBetter screens- Bright screens (NIT ratings)- TFT with 65,536 colors available on all sizes- 256 color STN screens on 6” modelsMore flexibility- Analog touch screen (no touch cell grid!)- Overlapping objectsBetter communications- USB Port-A- USB Port-B- Built-in Ethernet port- Built-in serial communicationsMore capacity- Built-in 10Mbyte project memory - CompactFlash card slot #1 (data logging)- Supports USB memory devices (data logging)- Symbol FactoryTM library with 4,000 symbols.More objects
- Over 50 objects including 16 pen trends, switches, PID trend faceplate, PID bar graph
faceplate
- Create custom objects and store in user library
- Improved multilanguage support for objects inGerman, French, Italian, Spanish, Chinese andJapanese characters
More high end features- Project simulator- Bitmap animation- E-mail messaging - Built-in FTP server- Pop-up window within a touch screen- Data logging to USB/CompactFlash
- Historical alarms with time and date stamp alongwith alarm frequency reporting.
- Supports simultaneous communication to multiple brands of PLCs.
- Event Manager - Audio line outImproved ease of use- Improved multi-language support.- Improved dialog boxes- “Power User” property box - More fonts and sizes- Master background screens- Improved recipesOptional accessories- Optional “Screw on” 110VAC power supply- Expansion unit for additional CompactFlash
yy
yyy
yy
yyyy
yyyy
y
yy
yyyyyy
y
y
yy
yyyyyy
yy
y-
y-
y
yy
yy-y
y-yy
y
yy
y y--y
y
-
y-
yyyyyy
y-
FullFeatured
Model
Base Model
The C-more Family
USB only