c MAGNI 595 · 2019-11-07 · ASTM B117: (topcoat) over 15-18 microns (basecoat) 0.12 ± 0.03...

1
PERFORMANCE DATA*: Coating thickness 8-10 microns Coefficient of friction ISO 16047: Color Heat resistance Salt spray ASTM B117: (topcoat) over 15-18 microns (basecoat) 0.12 ± 0.03 Silver 650° C MAX 400-1,000 hours OEM SPECIFICATIONS: Delphi DX551802 Ford WSA-M2P170-A3 MAGNI 595 MAGNI 595 Magni 595 is an inorganic zinc/aluminum coating that employs heat-resistant resin chemistry for applications subjected to extreme temperatures that exceed the capability of conventional metallic coatings. Resistant to temperatures up to 1200° F, Magni 595 is engineered for use on fasteners and other components. Magni 595 contains integrated friction modifiers to eliminate the need for sealers or post-coating lubricants. It is most commonly applied via the dip-spin application method but can also be applied via dip-drain or spray methods. FASTENER COATING Product Data Sheet MagniCoatings.com © Magni 10/19 *Typical Values - refer to OEM Specifications and Magni Application Guidelines for official specifications

Transcript of c MAGNI 595 · 2019-11-07 · ASTM B117: (topcoat) over 15-18 microns (basecoat) 0.12 ± 0.03...

Page 1: c MAGNI 595 · 2019-11-07 · ASTM B117: (topcoat) over 15-18 microns (basecoat) 0.12 ± 0.03 Silver 650° C MAX 400-1,000 hours. OEM SPECIFICATIONS: Delphi DX551802. MAGNI 595. FordWSA-M2P170-A3.

PERFORMANCE DATA*:

Coating thickness 8-10 microns

Coefficient of friction ISO 16047:

Color Heat resistance Salt sprayASTM B117:

(topcoat) over15-18 microns (basecoat)

0.12 ± 0.03

Silver

650° C MAX

400-1,000 hours

OEM SPECIFICATIONS:

Delphi DX551802

Ford WSA-M2P170-A3

MA

GN

I 595 MAGNI 595

Magni 595 is an inorganic zinc/aluminum coating that employs heat-resistant resin chemistry for applications subjected to extreme temperatures that exceed the capability of conventional metallic coatings. Resistant to temperatures up to 1200° F, Magni 595 is engineered for use on fasteners and other components.

Magni595containsintegratedfrictionmodifierstoeliminatetheneedforsealersor post-coating lubricants. It is most commonly applied via the dip-spin application method but can also be applied via dip-drain or spray methods.

FASTENER COATING

Product Data Sheet

MagniCoatings.com © Magni 10/19

*Typical Values - refer to OEM Specifications and Magni Application Guidelines for official specifications