By Fan Chao Chen

Sheer ribbons ( 2 piece, each 6 inch long) 5mm round acrylic stones (color should

match the ribbons) 2 earring hooks 4 jump rings 4 pearls 34 gauge wire 2 sets of metal chains (one set should be

½ inch longer) Some glue And a set of jewelry making tools

•Tie the ribbons in to bows (like tying shoes laces)

• Cut a triangle at the end of the ribbons (make sure each ribbon match each other)

•Glue the gems on to the ribbons•Set it aside and let dry

Put a pearl on a 6 inch 34 gauge wire

Then fold the wire in half and twist them together.

Cut off the extra(leaving an inch of wire

Then insert the chain.

Make a loop with the wire and coil it around each other.

Repeat step 4-6 to make a second chain.

Using 2 jewelry pliers open the ends of a

jump ring. Loop the jump ring into

the back of the bow ( the side with out the gem

Insert the two finished chains on to the jump ring.

Then close the jump ring.

Repeat step 8

Then insert a earring hook

And close the jump ring