BVS Vision Sensors - Increase quality and productivity · BVS-EStandard 26 BVS-EAdvanced 28...
Transcript of BVS Vision Sensors - Increase quality and productivity · BVS-EStandard 26 BVS-EAdvanced 28...
BVS Vision SensorsIncrease quality and productivity
2
Mature technology, individualsolutions – more efficiency!Fully exploit the potential ofhigh quality.
– 100 % quality
– High efficiency
– Increasedeconomy
With over 50 years of sensor experience, Balluff is a leading globalsensor specialist with its own line of connectivity products for everyarea of factory automation. Balluff is based in Germany and has atight international network of 54 representatives and subsidiaries.
Balluff stands for comprehensive systems from a single source,continuous innovation, the most modern technology, highestquality and greatest reliability and prides itself on distinctive customerorientation, custom-tailored solutions, fast worldwide service andoutstanding application assistance.
Serving as a solid foundation for optimized value creation withour customers are high-quality and innovative products anda quality management system that is certified in accordance withDIN EN ISO 9001:2008.
Whether electronic and mechanical sensors, rotary and linear trans-ducers, identification systems or optimized connection technologyfor high-performance automation, Balluff masters not only the entiretechnological variety with all of the different operating principles, butalso provides technology that fulfills regional quality standards andis suitable for use worldwide. Wherever you are in the world, Ballufftechnology is never far away. You won't have to look far for younearest Balluff expert.
Balluff products increase performance, quality and productivityaround the world every day. They satisfy prerequisites for meetingdemands for greater performance and cost reductions on the globalmarket. Even in the most demanding areas. No matter how stringentyour requirements may be, Balluff provides appropriate state-of-the-art solutions.
BVS Vision SensorsIncrease quality and productivity
i
3
Basic Information and Definitions 15
BVS Vision Sensors 25
Accessories 37
Alphanumeric Directory 55Worldwide Sales 56
Product Overview 13
BVS Vision Sensors
n www.balluff.com
4
VISIONVISIONVISIONBVS Vision SensorsEasy to use – As simple as a sensor
Replace up to 25 of the samesensors. Just one BVS,for example, is all you need toverify that a candy box is full.It detects all the pieces at onetime. With absolute reliability.
Replace up to seven differentsensors. The BVS handles alter-nating tasks with ease. It carriesout various functions in onepass: It checks brightness andcontour, compares contrasts andwidth, detects patterns, countsedges and monitors the position.Precisely.
7 in one!
Balluff Vision Sensorsincrease yourquality and productivity.
25 in one!
Balluff stands for comprehensive systems expertise from a singlesource, continuous innovation, the most modern technology, thehighest quality and greatest reliability. And more than that: for distinctcustomer orientation, i.e. custom-tailored solutions, fast worldwideservice and outstanding applications assistance. Use our know-how.And you profit from long years of experience.
Your customers expect you to provide more reliable and higher-performance machines. Balluff supports you: with the BVS VisionSensor.
Fast-running machines, frequent format changes or exact positionsall require precise, reliable and adaptable sensors. No problem forBalluff. Which means no problem for you. With us you handle yourgrowing requirements with ease.
n Flexible mountingn Industrial graden Simple to integraten Check variable parts positions
More variableand flexible
VISIONSENSOR
i
5n www.balluff.com
VISIOVISIOVISIOBVS Vision SensorsEasy to use – As simple as a sensor
The Balluff BVS Vision Sensor is available in two product lines:the BVS-E configured from a PC, and the BVS-C with separateconfigurator, with display and operating software already integrated.Simply choose the right one for your application and profit from amulti-talented sensor!
Once you have configured the Vision Sensor in three steps, it runsfully automatically. It even checks up to 25 different features inone pass. And you can combine all seven tools in any way you like.
VISIONSENSOR
Handling andautomation Automotive
Plasticand rubber Packaging
Pharmaceuticalsand cosmetics
Foods andbeverages
Medicaldevices
6
VISIONHardware Operation and
maintenanceStartupEngineering and
project planning
Standardsensors
Standardsensors
Standardsensors
Standardsensors
BVSBVSBVSBVS
n HardwareReduce hardware costs.One BVS Vision Sensor can replace up to25 standard sensors.
n Engineering and project planningOne sensor instead of 25 – for even fasterproduct selection. And you need only one sen-sor holder. Mounting becomes even simpler,especially since a mounting system exactlymatched to the BVS is available. Save time andreduce costs with a multi-talented sensor.
BVS Vision SensorsProductive and economical –Cost reduction made easy
n StartupConfiguration is as easy as using a simplesensor: Operation of the BVS is entirely intuitive.Clear guidance eliminates the need to learn aprogramming language or undergo expensivetraining.
n Operation and maintenanceSimply switch the BVS back and forth betweendifferent inspection tasks. No cumbersomerealignment of various sensors. Reduce both ef-fort and stress. Shortened setup times increaseyour productivity.
Reduce costsThe Balluff Vision Sensor combines the functions of expensive visionsystems with the ease of handling of photoelectric sensors.
100 % quality – one sensor is all you needWith our BVS Vision Sensors, you've chosen higher productivity,greater efficiency and 100% quality. Use Balluff BVS Vision Sensorswherever multiple monitoring functions are required at the sametime or in rapid succession. Simply adapt the Vision Sensor to yourrequirements. Reconfigurations, even in-process, are always pos-sible. So you always remain flexible. Monitor your production usingthe BVS with absolute reliability. One sensor is all you need for highefficiency.
VISIONSENSOR
VISIONSENSOR
7n www.balluff.com
VISIOi
n One sensor – with many functionsn One inspection – while monitoring up to 25 featuresn Simple format changing – for short setup times
Improve qualityOne Vision Sensor in credit card size with integrated processingelectronics, illumination and digital outputs. Once configured, theBVS Vision Sensor runs fully self-sufficiently. The results are receivedon three outputs in the form of digital signals and you can even usethe inputs to change the monitoring modes (inspections) during theprocess.
n Each part is checked – for 100% quality controln Defect image memory on-board –
find and eliminate defect causes fastern Integrated quality inspection becomes possible –
for optimized process control
BVS Vision Sensorsincrease productivity
BVS Vision Sensorsimprove quality
Improve quality
Reduce costs
88
BVS Vision SensorsApplications – Process reliabilityfor automation
VISIONSENSOR
Benefit– Multiple features are checked
at the same time– The parts scheduled for inspection
are checked in any position.
Location– Quality assurance– Product final inspection
Purpose– Ensure complete labeling– Monitor print quality– Inspect batches
Check labelingQuality assurance requires that a socketcan be checked for correct printing in anyposition. The BVS provides you with sevendifferent tools which can be combined witheach other depending on the product line.
Benefit– Easy setup– Continuous location detection
in-process, no stopping
Location– Monitoring feed equipment– Detecting parts location
before processing stations
Purpose– Avoid scrap– Prevent tool damage– Increase productivity
Detecting locationIn the feeder on an oscillating conveyor,screws are provided for assembly. With theBVS you prevent problems, since incorrectlylocated screws or different screw types areimmediately detected and shunted out.
Benefit– Automated quality assurance
around the clock– Flexible inspection– Check for multiple features at one time
Location– Quality inspection of assemblies– Inspection of hand-assembled units– Product final inspection
Purpose– Ensure completeness– Checking for the presence
of printing and labeling
Checking for presenceV-belt pulleys are attached using four nuts.The Vision Sensor checks the presence ofall nuts at any one time, simultaneously andindependently of the alignment position.
i
9n www.balluff.com 9n www.balluff.com
BVS Vision SensorsApplications – Process reliabilityfor automation
Benefit– Greater value added
(only defect-free parts are processed)– Improved utilization through
optimized material flow
Location– Processing inspection– Feed processes– Quality-selective process control
Purpose– Check shape, height, absence of flashing– Send back defective parts– Nominal/Actual comparison
Check contourInjection molded parts need to be checkedat the inspection station: Defective partsor parts with flashing are shunted out forspecial rework.
Benefit– Rapid switching between
twenty different presets
Location– Monitoring outgoing packages in shipping– Assembly inspection
Purpose– Control product flow correctly– Ensure product labeling– Ensure quality
Verify positionEach package requires a label. But some-times the label is located in the wrong place.With the BVS Vision Sensor you checkexactly whether the label is present andwhether it is properly applied.
Benefit– The sensor checks several features
at the same time and can output upto three independent signals
Location– Quality inspection– Feed monitoring in integrated production
Purpose– Visual, 100% reliable monitoring– Flexible setup
Checking for completenessAfter manual assembly, the completenessof a product is checked. Three flexibly con-figurable outputs allow you for example tomonitor the completeness of each series orspecial features.
1010
VISIONSENSOR
Benefit– Several inspections
performed simultaneously– Rapid changeovers
for different inspections
Location– Monitoring of automated processes– Inspection of processed components
Purpose– Prevent downtimes– Increase productivity
Monitoring sealsChecks must be performed during the au-tomated manufacturing process to establishwhether two seals are present and located inthe correct position. A combination of differ-ent tools completes the task reliably.
Benefit– Maximum reliability– Greatest flexibility– Highest productivity
Location– Quality inspection– Process monitoring
Purpose– Increase product quality– Increase process quality
Checking blister fillingTablet blisters are inspected after the au-tomated filling process as a form of qualityassurance measure. Check whether eachnest is filled and the correct preparation isinserted. Reconfigurations, even in-process,are always possible. So you always remainflexible. Monitor your production using theBVS with absolute reliability.
Benefit– Absolute dependability– Optimal quality– Changeovers even in-process
Location– Quality inspection– Process monitoring
Purpose– Increase product quality– Increase process quality
Checking bottle capsTo seal bottles perfectly, the cap needs to beseated correctly. Leave the inspection to ourVision Sensor. It checks positions absolutelyreliably and reduces scrap while simultane-ously increasing productivity. When formatsare changed, reconfigurations are even pos-sible in-process.
BVS Vision SensorsApplications – Process reliabilityfor automation
i
11n www.balluff.com 11n www.balluff.com
Benefit– Codes are read irrespective
of the position– High detection rate
Location– Final inspection– Product identification
Purpose– Part identification– Process monitoring– Print image monitoring
Detecting and readingData Matrix codesData Matrix codes are used in industrialenvironments. This BVS tool also incorpo-rates two modes: 1. a taught-in Data Matrixcode is inspected and an OK/NOK signal isoutput. 2. any code is read and output viathe serial interface so that you always knowwhat is happening during the productionprocess.
Benefit– Codes are read irrespective
of the position– High detection rate
Location– Final inspection– Product identification
Purpose– Part identification– Process monitoring– Print image monitoring
Detecting and reading barcodesBarcodes are a way of uniquely identifyingproducts during the manufacturing process.The BVS-E Identification incorporates twomodes: 1. a taught-in barcode is inspectedand an OK/NOK signal is output. 2. anycode is read and output via the serial inter-face.
Benefit– Fast changeovers– High processing rates
Location– Monitor feeders– Process monitoring
Purpose– Prevent incorrect filling– Downtimes prevented
Checking completenessBefore the blister is filled, a check is per-formed to determine whether all blisters arepresent, inserted correctly and empty toreduce the number of reject blisters as wellas decrease idle times.
BVS Vision SensorsApplications – Process reliabilityfor automation
12
BVS-E
Stand
ard
BVS-E
Adva
nced
BVS-C
withco
nfigurator
BVS-E
Iden
tifica
tion
Check brightness – Checks whether the brightness (gray values) inthe selected image area is greater than a configured threshold.– Identify different types and parts– Check illumination brightness– Detect the function of a display
n n n
Compare contrast – Determines whether a certain contrast is present in the image.– Monitor presence of labels– Detect a label– Check completeness
n n n
Count edges – Counts the gray value edges in the image area.– Monitor the number of pins on ICs– Check threads for completeness– Monitor the quality of gear wheels
n n n
Compare width – Compares the absolute distance between twoedges in an image.– Check for presence (e.g. lids)– Differentiate parts– Monitor location and orientation
n n n
Detect pattern – Detects patterns and differentiates objects usingimage processing. Digital patterns are "extracted" from the objects which arecompared with the pattern of the reference object.– Check parts quality– Differentiate types
n n n
Check contour – Checks the shape of an object.– Check for absence of burrs and flashing– Check stamped parts– Differential parts shapes– Nominal/Actual comparison
n n
Monitor position – Checks the relative object position in the image.– Monitor level– Position parts and products– Position labels
n n n
Compare character (OCV) – Compares characters.– Check labels– Monitor printing(e.g. ensure correct dates for different lots)
– Check logos
n n
360° position detection– Align parts– Robot control (via Ethernet interface)– Inspection irrespective of the position
n
Detect and identify barcode and Data Matrix code– Code verification– Documentation of parts used– Verify characters
n
BVS Vision SensorsTool overview –seven functions in one sensor
VISIONSENSOR
BVS Vision Sensors offer several tools for reliable monitoring of yourproduction processes. All variants include special features. Simplyconcentrate on your task and select the right version according toyour needs. The BVS offers the best solutions – for every application.
i
13n www.balluff.com
BVS Vision SensorsProduct overview –The possibilities at a glance
BVS will help you to optimize your process control, regardlessof which version you use in your application. Benefit from greaterefficiency.
The following provides an overview of different functions and specialfeatures to help you select the right Vision Sensor for your applica-tion.
Choose the best solution.
BVS-E Standard BVS-E Advanced BVS-C with configurator BVS-E IdentificationFeaturesTools 7 7 8 3Features per inspection up to 25 up to 25 1 up to 25Inspections 20 20 20 20Connection Multiple sensors
in the networkMultiple sensorsin the network
Multiple sensorsin the network
Bus interface Ethernet Ethernet EthernetConnectiontype
PNP n n n n
NPN n n n
Focal length 6 mm n n
8 mm n n n n
12 mm n n n n
Parameterconfiguration
ConVis n n n
Configurator n
Starter kit available n n n n
The benefits to you
– Short setup timesand convenient formatchanging on the PC
– Flexible adaptation toyour process throughsimple switching of themonitoring modes
– Simultaneous check-ing of multiple features
In addition to thefunctions of the BVS-EStandard:– Logical linking of
tools to the outputs– Efficient hardware
for higher processingrates
– 360° positiondetection
– Easy to retrofit intoyour equipment
– Configurator forfast startup
– Simple to makeon-site correctionsduring the process
– Continuousstatus monitoringon the display
– Operated without a PC
– 1D codes:detects or reads allcommon barcodes
– 2D codes:detects or readsData Matrix codes
– Verify characters– Output via serial
interface RS232
From page 26 28 30 32
14
15n www.balluff.com
Basic Information and DefinitionsContents
Balluff Vision Sensors were designed for the reliable monitoringof production processes and objects. The sensor compares thefeatures of the current image with the features taught in from thereference image. The outputs are set depending on the result.The BVS can retrieve the properties of any image characteristic andis capable of performing several tasks simultaneously as a result.
Optical and electrical properties 16
Control options 20
Mechanical properties 22
Quality 23
16
Basic Information and DefinitionsOptical and electrical properties
VISIONSENSOR
Saved reference image. The pattern/contour/corner points in theregion of interest within the reference image define the pattern (orcontour) detected by the "Detect pattern", "Detect 360 degree pat-tern" and "Detect contour" tool.The reference image does not have a direct influence on any othertools, it is used as a reference for detecting OK or NOK parts.
Current image
Reference image
Sensor overview
... is the image captured by the sensor, which is thenprocessed/inspected.
Teach and recovery button
Indicator LEDs
Internal lighting
Lens
Focus ring
Power connection (M12 connector, 8-pin)
Ethernet connection (M12 connector, 4-pin)
An inspection consists of:– a taught-in reference image– the tools that inspect one or more regions of interest
within the digital image on the object– and the three functions assigned to digital outputs
e.g. output 1 signals the result "Inspection OK"and output 2 signals "Inspection not OK".
All settings such as trigger, lighting etc.are saved during an inspection.
Possible results include: "Inspection OK" if the inspection returnsa positive result for all tools."Inspection not OK" if at least one tool returns a negative resultor one or more tools are not taken into account. Outputs can beassigned directly to single inspections.
Inspection
Inspection result
... is the area within an image marked by a frame and inspected by atool. In the case of the tools "Detect pattern" and "Detect 360° pat-tern", the ROI is the pattern that the sensor is searching for whereasthe image area being inspected is the search area.
ROI(region of interest)
17n www.balluff.com
Basic Information and DefinitionsOptical and electrical properties
Opticaland electricalpropertiesControloptionsMechanicalpropertiesQuality
The total inspection time consists of the exposure time, capture timeand processing time.
Exposure time: the exposure time is referred to as the "shutterspeed". The amount of light that shines on the image sensor isdirectly proportional to the exposure time and the light currentlyavailable. The longer the exposure time, the greater the amount oflight that shines on the image sensor. When configuring thecorrect exposure time, the following factors are most important:
– Speed of the part scheduled for inspection– Number of parts per second– Continuously available light
Capture time: The time required to capture an image. After exposureof the image sensor, the image must be transferred to the memoryon the device. The whole process takes approximately 30 ms for acomplete image. The time decreases considerably if only part of thecomplete image is captured.
Processing time: The time taken to process the captured image.Depends on the operations and tools used for the inspection.
Inspection times
A position tracking tool can be used to compensate for a part thatfrequently changes position. However, the part must not leave thefield of view. The position tracking tool "follows" the position of thepart within the field of view and aligns all other tools according to thecurrent position of the part.
Position tracking tool
Working range 50...1000 mm
Working range50...500 mm
n Wide-angle lens, focal length 6 mmn Standard lens, focal length 8 mmn Telephoto lens, focal length 12 mm
Bring your working range up close with the telephoto lens. Or takeadvantage of the larger field of view at the same working distanceoffered by the wide-angle and standard lenses. Use the distancecomputer: www.balluff.com/vision
Working distance andfield of view
The working distance describes the minimum and maximumdistance between the sensor lens and object. The field of view isthe surface area that the sensor can detect at the specified workingdistance. The larger the working distance, the larger the field of view.The light intensity of the illuminated object decreases by the squareroot of the working distance. Objects positioned further away appeardarker than closer objects as a result.
... is the difference in brightness between two adjacent regions ofinterest. The correct lighting should maximize the contrast betweengood and poor features.
Contrast
18
VISIONSENSORBasic Information and DefinitionsOptical and electrical properties
Photoelectric sensors and lights are categorized into different groups based on the degree of risk to human eyes and skin.
Eye safety per IEC 62471:2006
Extempt group Risk group 1Sensors or lights do not pose a photobiological risk.
Sensors or lights do not pose a risk due to standard precautionary measures taken by the user.
– Vision Sensors BVS-E and BVS-C– Spotlights, red and white light– Background lights, red light– Dark field illumination, red light– Ring lights, red and white light– Line lights, red and white light– Line lights, infrared during normal operation
– Ring lights, infrared– Line lights, infrared during boost mode
The trigger signal starts an event. A trigger signal initiates the capture and evaluation of an image in conjunction with the BVS. The BVS has different trigger settings that can be configured using software available free of charge.
Trigger
The success and failure of the Vision Sensor in different applications often determines which lighting is selected. Illumination at the place of operation must be carefully selected, adjusted and remain as constant as possible during all object inspections.
See page 38 for more information on lighting.
Lighting
Software You will require ConVis software to operate Balluff Vision Sensors, which is available free of charge. The product is supplied with a CD ROM containing the software.
19n www.balluff.com
Basic Information and DefinitionsOptical and electrical properties
Opticaland electricalpropertiesControloptionsMechanicalpropertiesQuality
IP address The IP address is a unique address that identifies a networkdevice and allows you to communicate with the sensor.The standard address of all BVS devices is: 172.27.101.208
Rated operating current Ie On BVS Vision Sensors:... is the maximum current with which the sensor may be loaded atits output in continuous operation.
On BAE lights:... is the current required for operation.
... is the voltage range in which flawless functioning of the sensor isassured. It includes all voltage tolerances and ripple.
Supply voltage UB
Switching function PNP (+) sourcing NPN (–) sinking
Typ. detection rate
Ambient temperaturerange Ta
Short-circuit protection andoverload protection
Different calculating times are required to evaluate the tools in aninspection. The typical detection rate is a guide value that indicateshow often a part can be inspected per second.
The ambient temperature determines the temperature range inwhich the sensor may be operated.
All DC sensors feature this protection device. In the event of overloador short-circuit at the output, the output transistor is automaticallyswitched off. As soon as the malfunction has been corrected, theoutput stage is reset to normal functioning.
0 V
B+U
External Trigger out7
6
318
542
Q1
Q3Q2
SelectExternal Trigger
0 V
B+U
External Trigger out
76
318
54
2
Q1
Q3Q2
SelectExternal Trigger
20
Connect the BVS-E Vision Sensor to your PC over Ethernet. Thebuilt-in software wizard guides you to successful configuration in justthree steps. Simply enter your desired inspection parts or features,test your inspection, and check the results on the screen. Slightchanges and corrections are easily made. Clear guidance eliminatesthe need to learn a programming language or undergo expensivetraining.
BVS-E –with Balluff BVS ConVis –the "Easy to Use" software
The software is already integrated into the separate configurator withkeypad. Once the configurator and Vision Sensor are connected,simply select the tool for your application and define image settingssuch as image section. Then set your tool parameters and test yourinspection. That's it.Making corrections in-process is also easy. Because the displayprovides continuous status monitoring in-place, so that you are con-tinually checking the sensor function and can immediately correctdeviations. Product defects are detected directly.
BVS-C –especially easy to set upusing the configurator
Step 1Connect
Step 1Connect
Step 2Configure
Step 2Configure
Step 3Run
Step 3Run
Establish a connection betweenthe ConVis software and thesensor. Determine the imagebrightness and lighting settings.
Connect the sensor to themonitor.
Determine the features you wishto inspect and select all the rel-evant tools. Configure the outputsignals.
Select the appropriate tool anddefine image settings includingimage section.
Test the inspection –view the results and correct ifnecessary.
Set the tool parameters and testyour inspection.
ConVis software
Configurator
BVS-E
with
ConVis
software
BVS-C
with
Configura
tor
Basic Information and DefinitionsControl options
VISIONSENSOR
PLC
PLC
21n www.balluff.com
Opticaland electricalpropertiesControloptionsMechanicalpropertiesQuality
Basic Information and DefinitionsControl options
Special features ofBalluff BVS ConVisVision Sensor software
BVS-E StandardThe standard version of theVision Sensor software has thefollowing features:20 inspection memory slots,free rotation of tools and a zoomfunction. You have the choiceof seven independent tools.Needless to say, free softwareupdates are included andexisting sensors can be updatedeasily.
BVS-E AdvancedThe BVS-E Advanced offersall the features of the standardversion in addition to 360°position detection and logicallinking.These features allow the combi-nation of a maximum of 25 toolsas well as full utilization of threedigital outputs.
BVS-E IdentificationThis version allows you todetect and read all standardcodes available on the market.Barcodes or Data Matrix codeswithin the field of view are readand inspected and/or output viathe serial interface, dependingon the settings. The largenumber of codes that the sensorcan recognize allows you to usedevices capable of reading vary-ing code types.
You only need one software package, whichever BVS you use. Thesoftware detects the connected sensor automatically. You can alsouse the software to simulate all sensor models and establish whetheran alternative sensor model is compatible with your application.
ANDORExclusive ORNOT ANDNOT ORNOT Exclusive ORNOTMajority selector
Logical connections
22
Materials
Degree of protection The enclosure ratings IP 20,IP 40, IP 54, IP 64 up toIP 68 are in accordance withIEC 60529.Code letters IP (InternationalProtection) designate protectionagainst shock hazard, ingress ofsolid foreign bodies, and water,for electrical equipment.
First digit:2 Protection against penetration
of solid bodies larger than12 mm, shielding from fingersand objects
4 Protection against penetrationof solid bodies larger than1 mm, shielding from toolsand wires
5 Protection against harm-ful dust deposits, completeshock-hazard protection
6 Protection against penetrationof dust, completeshock-hazard protection
Second digit:0 No special protection4 Protection against water
spraying from all directionsagainst the piece ofequipment concerned
5 Protection against a water jetfrom a nozzle, directed fromall directions against the pieceof equipment concerned
7 Protection against water, whenthe piece of equipment con-cerned (housing) is immersedin water under specified pres-sure and time conditions
8 Protection against water dur-ing continuous submersion
Basic Information and DefinitionsMechanical properties
Four accompanying M4×6 mm screws are used to secure thesensor. A comprehensive range of accessories is available for easysensor mounting. The illustration shows the accessories used tomount the sensor.
Do not install the sensor in a position exposed to direct sunlight orstrongly fluctuating ambient light.If you wish to check an object with reflective surfaces, we recom-mend mounting the BVS at an angle of 5 to 15° in relation to thevertical axis to prevent reflections.
Installation
Material Use and characteristicsPlasticsABSAcrylonitrile Butadiene Styrene
Impact-resistant, stiff, limited chemical resistance.Some types flame-retardant. Used for housings.
PMMAPolymethylmethacrylate
Clear, transparent, hard, scratch-resistance, UV resistant, mainly foroptical applications.
PURPolyurethane
Elastic, abrasion-resistant, impact-resistant. Good resistanceto oils, greases, solvents (used for gaskets and cable jackets).
PVCPolyvinylchloride
Good mechanical strength and chemical resistance (cable).
MetalAlAluminum wrought alloy
Standard aluminum for cut shaping. Can be anodized.Used for housings and mounting components.
Stainless steel Excellent corrosion resistance and strength.Quality 1.4034, 1.4104: Standard materialQuality 1.4305, 1.4301: Standard material for
foods industryQuality 1.4401, 1.4404, 1.4571: For foods industry with higher
requirements regardingchemical resistance at elevatedtemperatures
GD-ZnCast zinc
Good resistance and strength. Usually with protective surfacecoating.
OtherGlass Good chemical resistance and strength. Used primarily in optical
applications (lenses, cover lenses).
VISIONSENSOR
5...15°
23n www.balluff.com
Basic Information and DefinitionsQuality
Quality management systemper DIN EN ISO 9001:2008
Environmental managementsystem perDIN EN ISO 14001:2005
Balluff products complywith EU directives
Approvals
Balluff companiesBalluff GmbH GermanyBalluff SIE Sensorik GmbH GermanyBalluff Elektronika Kft HungaryBalluff Sensors (Chengdu) Co., Ltd. ChinaBalluff Ltd. Great BritainBalluff Automation S.R.L. ItalyBalluff Inc. USABalluff GmbH AustriaBalluff CZ, s.r.o Czech RepublicBalluff Hy-Tech AG SwitzerlandBalluff Sensortechnik AG SwitzerlandBalluff Controles Elétricos Ltda. BrazilBalluff de México S.A. de C.V. MexicoBalluff S.L. Spain
Balluff companiesBalluff GmbH GermanyBalluff Elektronika Kft HungaryBalluff Sensors (Chengdu) Co., Ltd. China
Products that require labeling are subject to a conformity evaluationprocess according to the EU directive and the product is labeledwith the CE marking.Balluff products fall under the following EU directive:
... are granted by national and international institutions.Their symbols affirm that our products meet the specificationsof these institutions."US Safety System" and "Canadian Standards Association"under the auspices of Underwriters Laboratories Inc. (cUL).
2004/108/EC EMC directive
Opticaland electricalpropertiesControloptionsMechanicalpropertiesQuality
24
25n www.balluff.com
Lights, connectorsand mountingcomponents,see chapter"Accessories",on page 37
BVS Vision SensorsContents
BVS-E Standard 26
BVS-E Advanced 28
BVS-C with configurator 30
BVS-E Identification 32
BVS starter kits 34
The range of Vision Sensors isdivided into four main groupsin order to offer customized solu-tion for each application:– BVS-E Standard completes
simple tasks with ease.– The BVS-E Advanced
provides a solution for quick,demanding applications.
– The BVS-C with configura-tor is used to teach in inspec-tions via a separate operatingmodule and monitor progressdirectly on the live screen.
– The BVS-E Identificationreads 1D and 2D codesand outputs the informationdirectly via the serialinterface.
26
Vision Sensors BVS-E StandardFor increased quality and productivity
VISIONSENSOR
Inspect and monitor your production process with the BVS-EStandard. Choose the correct tool for your application from a largeselection and set up your inspection. You can replace severalsensors with a combination of tools. If different components areused, activate the relevant inspection via the PLC control to allowproduction to continue seamlessly without requiring a teach-in/setupprocess.
n Simple operationn Convenient setupn Reliable evaluationn Extensive range of accessoriesn Function module for PLC available
Software version 1.2– 20 inspection memory cells– Free rotation of tools– Zoom function– Existing sensors updated at no extra cost– Seven independent tools
27n www.balluff.com
Lights, connectorsand mountingcomponents,see chapter"Accessories",on page 37
Series Vision sensor Vision sensor Vision sensorStyle BVS-E Standard BVS-E Standard BVS-E StandardLens, focal length Wide-angle lens, 6 mm Standard lens, 8 mm Telephoto lens, 12 mmPNP Ordering code BVS000E BVS0003 BVS0005
Part number BVS OI-3-005-E BVS OI-3-001-E BVS OI-3-003-ENPN Ordering code BVS000C BVS0004 BVS0006
Part number BVS OI-3-006-E BVS OI-3-002-E BVS OI-3-004-ESupply voltage UB 24 V DC ±10 % 24 V DC ±10 % 24 V DC ±10 %Switching inputs 1× Trigger, 1× Select 1× Trigger, 1× Select 1× Trigger, 1× SelectSwitching outputs 1× lighting synchron. or PNP,
3× PNP or NPN configurable1× lighting synchron. or PNP,3× PNP or NPN configurable
1× lighting synchron. or PNP,3× PNP or NPN configurable
Rated operating current Ie 100 mA 100 mA 100 mAConfiguration interface Ethernet 10/100 Base T Ethernet 10/100 Base T Ethernet 10/100 Base TParameter configuration ConVis for Windows ConVis for Windows ConVis for WindowsTyp. detection rate 3...15 Hz (depending
on evaluation function)3...15 Hz (dependingon evaluation function)
3...15 Hz (dependingon evaluation function)
Image sensor CMOS-SW-VGA 640×480 CMOS-SW-VGA 640×480 CMOS-SW-VGA 640×480Working range 50...1000 mm 50...1000 mm 50...1000 mmWorking distance, 50 mm, 1000 mm, 50 mm, 1000 mm, 50 mm, 1000 mm,Field of view (horizontal×vertical) 42×30 mm 640×480 mm 25×20 mm 460×380 mm 17×12 mm 320×210 mmLighting LED, incident light (red), deselectable LED, incident light (red), deselectable LED, incident light (red), deselectableEye safety per IEC 62471 Extempt group Extempt group Extempt groupDimensions 58×52×40 mm 58×52×40 mm 58×52×40 mmConnection 2 connectors M12
(8- and 4-pin)2 connectors M12(8- and 4-pin)
2 connectors M12(8- and 4-pin)
Degree of protection per IEC 60529 IP 54 IP 54 IP 54Ambient temperature range Ta –10...+55 °C –10...+55 °C –10...+55 °C
Refer to the chapter "BasicInformation and Definitions"on page 15 for optical andelectrical information.To define the field of view andworking distance, use thedistance calculator at:www.balluff.com/vision
Vision Sensors BVS-E StandardFor increased quality and productivity
BVS-EStandardBVS-EAdvancedBVS-C withconfiguratorBVS-EIdentificationBVS starter kits
Description Starter kitVersion for BVS-E StandardOrdering code BVS000APart number BVS Z-SK-OI-01Contents Vision Sensor, mounting
bracket, installationaccessories, connector,software and quick guide
EPLAN macros –Electrical projectplanning made easy.Also for the BVS!
28
ANDORExclusive ORNOT ANDNOT ORNOT Exclusive ORNOTMajority selector
Logical connections
Vision Sensors BVS-E Advanced360° detection for optimizedprocess control
VISIONSENSOR
In addition to the standard functions of the BVS-E, the advancedvision sensor also monitors the rotational position. It can detectobjects regardless of the location and position. Production can bemonitored more efficiently through shorter process times and theoption of using logical functions to combine individual checks.
n 360° position trackingn Faster processor reduces process timesn Features linked by logical functionsn Extensive range of accessoriesn Function module for PLC available
29n www.balluff.com
Lights, connectorsand mountingcomponents,see chapter"Accessories",on page 37
Vision Sensors BVS-E Advanced360° detection for optimizedprocess control
BVS-EStandardBVS-EAdvancedBVS-C withconfiguratorBVS-EIdentificationBVS starter kits
Series Vision sensor Vision sensor Vision sensorStyle BVS-E Advanced BVS-E Advanced BVS-E AdvancedLens, focal length Wide-angle lens, 6 mm Standard lens, 8 mm Telephoto lens, 12 mmPNP Ordering code BVS000L BVS000J BVS000K
Part number BVS OI-3-055-E BVS OI-3-051-E BVS OI-3-053-ENPN Ordering code BVS000R BVS000P BVS000N
Part number BVS OI-3-056-E BVS OI-3-052-E BVS OI-3-054-ESupply voltage UB 24 V DC ±10 % 24 V DC ±10 % 24 V DC ±10 %Switching inputs 1× Trigger, 1× Select 1× Trigger, 1× Select 1× Trigger, 1× SelectSwitching outputs 1× lighting synchron. or PNP,
3× PNP or NPN configurable1× lighting synchron. or PNP,3× PNP or NPN configurable
1× lighting synchron. or PNP,3× PNP or NPN configurable
Rated operating current Ie 100 mA 100 mA 100 mAConfiguration interface Ethernet 10/100 Base T Ethernet 10/100 Base T Ethernet 10/100 Base TParameter configuration ConVis for Windows ConVis for Windows ConVis for WindowsTyp. detection rate 3...50 Hz (depending
on evaluation function)3...50 Hz (dependingon evaluation function)
3...50 Hz (dependingon evaluation function)
Image sensor CMOS-SW-VGA 640×480 CMOS-SW-VGA 640×480 CMOS-SW-VGA 640×480Working range 50...1000 mm 50...1000 mm 50...1000 mmWorking distance, 50 mm, 1000 mm, 50 mm, 1000 mm, 50 mm, 1000 mm,Field of view (horizontal×vertical) 42×30 mm 640×480 mm 25×20 mm 460×380 mm 17×12 mm 320×210 mmLighting LED, incident light (red), deselectable LED, incident light (red), deselectable LED, incident light (red), deselectableEye safety per IEC 62471 Extempt group Extempt group Extempt groupDimensions 58×52×40 mm 58×52×40 mm 58×52×40 mmConnection 2 connectors M12
(8- and 4-pin)2 connectors M12(8- and 4-pin)
2 connectors M12(8- and 4-pin)
Degree of protection per IEC 60529 IP 54 IP 54 IP 54Ambient temperature range Ta –10...+55 °C –10...+55 °C –10...+55 °C
Description Starter kitVersion for BVS-E AdvancedOrdering code BVS000MPart number BVS Z-SK-OI-03Contents Vision Sensor, mounting
bracket, installationaccessories, connector,software and quick guide
Refer to the chapter "BasicInformation and Definitions"on page 15 for optical andelectrical information.To define the field of view andworking distance, use thedistance calculator at:www.balluff.com/vision
EPLAN macros –Electrical projectplanning made easy.Also for the BVS!
30
SeriesStyleLens, focal lengthPNP Ordering code
Part numberSupply voltage UB
Switching inputsSwitching outputs
Rated operating current IeParameter configurationTyp. detection rate
Image sensorWorking rangeWorking distance,Field of view (horizontal×vertical)LightingEye safety per IEC 62471DimensionsConnection
Degree of protection per IEC 60529Ambient temperature range Ta
Display
VISIONSENSOR
For fast and simple retrofitting of machines and equipment, youcan also get the BVS Vision Sensor with a separate configuratorincluding display and software. You can also use the same tools onthe BVS-E series as the BVS-C. The difference? Tasks are taught inusing a configurator.
n Quick and easy to retrofitn Simple operation, without a PCn Process monitoring in live screenn Application statisticsn Configurator and/or PLC for changing between inspectionsn Setup times minimizedn Extensive range of accessoriesn Function module for PLC available
Refer to the chapter "BasicInformation and Definitions"on page 15 for optical andelectrical information.To define the field of view andworking distance, use thedistance calculator at:www.balluff.com/vision
The complete solutionincluding BVS-C configurator– Color 3.5 inch display and
handy operating buttons– 20 inspection memory cells– Eight independent tools– On-site teach-in and
correction– Password protection possible
EPLAN macros –Electrical projectplanning made easy.Also for the BVS!
Vision Sensors BVS-Cwith ConfiguratorMaximum productivitywith a local solution
31n www.balluff.com
Lights, connectorsand mountingcomponents,see chapter"Accessories",on page 37
Vision sensor Vision sensor Configurator with displayBVS-C with configurator BVS-C with configurator BVS-CStandard lens, 8 mm Telephoto lens, 12 mmBVS0008 BVS0007 BAE009CBVS OI-3-011-C BVS OI-3-013-C BAE PD-VS-001-C24 V DC ±10 % 24 V DC ±10 % 24 V DC ±10 %1× Trigger, 1× Select 1× Trigger, 1× Select1× lighting synchron. or PNP,3× PNP or NPN configurable
1× lighting synchron. or PNP,3× PNP or NPN configurable
100 mA 100 mAConfigurator Configurator3...15 Hz (dependingon evaluation function)
3...15 Hz (dependingon evaluation function)
CMOS-SW-VGA 640×480 CMOS-SW-VGA 640×48050...1000 mm 50...1000 mm50 mm, 1000 mm, 50 mm, 1000 mm,25×20 mm 460×380 mm 17×12 mm 320×210 mmLED, incident light (red), deselectable LED, incident light (red), deselectableExtempt group Extempt group58×52×40 mm 58×52×40 mm 96×96×42.4 mm2 connectors M12(8-pin)
2 connectors M12(8-pin)
1 connector M12(8-pin)
IP 54 IP 54 IP 40–10...+55 °C –10...+55 °C –10...+55 mm
3.5“ color LCD
BVS-EStandardBVS-EAdvancedBVS-C withconfiguratorBVS-EIdentificationBVS starter kits
Description Starter kitVersion for BVS-C with configuratorOrdering code BVS0009Part number BVS Z-SK-OI-02Contents Vision Sensor, configurator,
mounting bracket, installationaccessories, connector,software and quick guide
Vision Sensors BVS-Cwith ConfiguratorMaximum productivitywith a local solution
Vision Sensors BVS-EIdentificationDetecting and identifyingvaried codes
VISIONSENSOR
Check the marking on your products. Regardless of whether youlabel them with 1D codes (barcodes) or 2D codes (Data Matrixcodes), the BVS reads all common codes on the market. Text andsequences of numbers such as code plain text can be verified usingOCV. The result: "Inspection OK" or "Inspection not OK".If you need to view the read code data to find out which partsare being processed, you can output it via the RS232 or Ethernetinterface.
n Simple operationn Read several codes in an inspection simultaneouslyn Output code data via RS232 or Ethernet interfacen Verify character stringsn Change between inspections via PLCn Codes read in any positionn Extensive range of accessoriesn Function module for PLC available
323232
Readable barcodes– Interleaved 2-of-5– Code 39– Code 128– Pharmacode– Codabar– EAN 8– EAN 13– UPC-E– PDF 417––
Readable Data Matrix codes– ECC 200
33n www.balluff.com
Lights, connectorsand mountingcomponents,see chapter"Accessories",on page 37
Vision Sensors BVS-EIdentificationDetecting and identifyingvaried codes
BVS-EStandardBVS-EAdvancedBVS-C withconfiguratorBVS-EIdentificationBVS starter kits
Series Vision sensor Vision sensorStyle BVS-E Identification BVS-E IdentificationLens, focal length Standard lens, 8 mm Telephoto lens, 12 mmPNP Ordering code BVS0001 BVS000T
Part number BVS ID-3-001-E BVS ID-3-003-ESupply voltage UB 24 V DC ±10 % 24 V DC ±10 %Switching inputs 1× Trigger, 1× Select 1× Trigger, 1× SelectSwitching outputs 1× lighting synchron., 1× PNP 1× lighting synchron., 1× PNPInterface RS232 RS232Rated operating current Ie 100 mA 100 mAConfiguration interface Ethernet 10/100 Base T Ethernet 10/100 Base TParameter configuration ConVis for Windows ConVis for WindowsTyp. detection rate 3...15 Hz (depending
on evaluation function)3...15 Hz (dependingon evaluation function)
Image sensor CMOS-SW-VGA 640×480 CMOS-SW-VGA 640×480Working range 50...1000 mm 50...1000 mmWorking distance, 50 mm, 1000 mm, 50 mm, 1000 mm,Field of view (horizontal×vertical) 25×20 mm 460×380 mm 17×12 mm 320×210 mmLighting LED, incident light (red), deselectable LED, incident light (red), deselectableEye safety per IEC 62471 Extempt group Extempt groupDimensions 58×52×40 mm 58×52×40 mmConnection 2 connectors M12
(8- and 4-pin)2 connectors M12(8- and 4-pin)
Degree of protection per IEC 60529 IP 54 IP 54Ambient temperature range Ta –10...+55 °C –10...+55 °C
Refer to the chapter "BasicInformation and Definitions"on page 15 for optical andelectrical information.To define the field of view andworking distance, use thedistance calculator at:www.balluff.com/vision
Description Starter kitVersion for BVS-E IdentificationOrdering code BVS000UPart number BVS Z-SK-ID-04Contents Vision Sensor, mounting
bracket, installationaccessories, connector,software and quick guide
EPLAN macros –Electrical projectplanning made easy.Also for the BVS!
Vision Sensor BVS Starter KitsAll in one box
VISIONSENSOR
Our starter kits include all the most important products in a singlepackage. In addition to a starter kit, you only require a 24 V powersupply to start setting up your application. The sensor is quick andeasy to integrate in existing environments as a result.
The main components of the kit:n Vision Sensorn Mounting bracketsn Ethernet cablen Supply cablen Setup and assembly materials
Furthermore, a starter kit also contains the latest copy of the productcatalog, the relevant user's guide and a software CD.
DescriptionVersionOrdering codePart numberContents
Additional information
343434
All starter kits are suppliedwith standard lens, 8 mmfocal length!
Sample starter kitBVS0009 with BVS-C
35
Lights, connectorsand mountingcomponents,see chapter"Accessories",on page 37
BVS-EStandardBVS-EAdvancedBVS-C withconfiguratorBVS-EIdentificationBVS starter kits
Vision Sensor BVS Starter KitsAll in one box
Starter kit Starter kit Starter kit Starter kitfor BVS-E Standard for BVS-E Advanced for BVS-C with configurator for BVS-E IdentificationBVS000A BVS000M BVS0009 BVS000UBVS Z-SK-OI-01 BVS Z-SK-OI-03 BVS Z-SK-OI-02 BVS Z-SK-ID-04Vision Sensor,mounting bracket, installationaccessories, connector,software and quick guide
Vision Sensor,mounting bracket, installationaccessories, connector,software and quick guide
Vision Sensor, configurator,mounting bracket, installationaccessories, connector,software and quick guide
Vision Sensor,mounting bracket, installationaccessories, connector,software and quick guide
page 26 page 28 page 30 page 32
nnn www.balluff.comwww.balluff.comwww.balluff.com
36
37
AccessoriesContents
n www.balluff.com
Lights Introduction,basic information 38Ring lights 41Line lights 42Background lights 44Spotlights 46Dark field illumination 47
Connectors Vision Sensor connection 48Vision Sensorparameter configuration 48Configurator connection 49Illumination connection 49
Mounting components Mounting components 50Mounting system 52
The correct accessories willhelp you integrate Balluff BVSVision Sensors perfectly in yoursystem. Regardless of whetheryou require a retrofit or newinstallation, Balluff offers you allthe components you need froma single source:– Lights –
selecting the best illuminationoption for your application
– Connector and connectioncable – designed for VisionSensors and lights
– Mounting components –mounting brackets andassembly systems integratesensors and lights quicklyand easily
38
AccessoriesOptimizing illumination –Process reliability
Lights used in an industrial environment depend on maximum reli-ability, outstanding quality and a good price/performance ratio.Balluff offers different versions of light to suit your needs. Select thebest solution for your task and profit from our mature technology.
We offer different versions:– Ring lights– Line lights– Background lighting– Spotlights– Dark field illumination
Ring lights– Compatible mounting bracket for sensor and light– Shadow free illumination with a high degree of brightness– For inspections with a large working distance
See page 41 for information on ring lights.
Line lights– Homogeneous, directed light– Generate shadows to check features– Available with red, infrared and white light
See page 42 for information on line lights.
Background lights– Simple monitoring of dimensions and shapes– Independent of material and surface type– Various light field sizes available
See page 44 for information on background lights.
Spotlights– Accurate illumination– Implement larger inspection distances– Available with red and white light
See page 46 for information on spotlights.
Dark field illumination– Monitors scratches and dents in surfaces– Independent of material and surface type– Various light field sizes available
See page 47 for information on dark field illumination.
Product overview
Highest qualityOur wide range of lights is subject to strict quality stan-dards. For example, the function of all lights is tested for24 hours prior to delivery. Our lights are protected againstdamages from burst pulses on the connection cable orelectrostatic discharge (ESD). EMC tests performed by anaccredited test laboratory have proven this.
Eye safety per IEC 62471Strong artificial radiation as from LEDs, for example, canaffect your vision. Our lights are therefore tested by anindependent, certified test laboratory according to thelatest applicable standard (IEC 62471). All of our lights arecategorized into the "Extempt group" or "Risk group 1"and are therefore considered extremely safe. By compari-son: the sun falls into risk group 3.
Fast, simple mountingAll lights are quick, easy and economical to mount andalign with the Balluff Mounting System BMS.
Long service lifeWe use only extremely luminous LEDs of the highestquality to manufacture our lights. Our extremely luminousring and line lights are equipped with an excess tempera-ture deactivation mechanism to extend the useful life ofan LED, which depends primarily on the temperature load.
Simple startupYou only need a conventional 24 V power supply to con-nect our lights. Expensive control units are not required.Our background and dark field lights are connected to a24 V DC power supply. That's it. Ring and line lights aretriggered directly by the Vision Sensor or a PLC.
Boost functionRing and line lights have a boost function that increaseslight intensity by 30 % and reduces the influence of ambi-ent light. Overall process reliability is increased as a result.
The benefits to you
39n www.balluff.com
AccessoriesOptimizing illumination –Process reliability
Balluff offers a wide range of additional lights becauseeach image processing task depends entirely on theillumination. Only perfect light can provide ideal conditionsfor your inspection.
LightsConnectorsMountingcomponents
40
Background lightWith the through beam method, the background lighting is posi-tioned behind the object you wish to detect. The Vision Sensor onlydetects the outline of the object based on this position and allowsyou to monitor part dimensions or shapes extremely easily. Extrane-ous light also poses no problems. Changes in the surface (markings,color, etc.) can be suppressed almost completely and have no influ-ence on the test result.Our background lights are particularly bright and versatile. You canalso use them as subtle incident lights to illuminate highly reflectivecomponents.Due to the extremely flat design, they are ideal for use in applicationswith limited space.
Frequently asked questions:
What should the distancebetween the light and thecomponent be?The light intensity on an object de-creases with the working distance.Objects positioned further awayappear darker than closer objectsas a result, e. g. if a bright object isinspected once at a distanceof 10 cm and once at 100 cm.The brightness of the object10 cm is 100 times greater than ata distance of 100 cm.Select the best distances betweenthe light source, sensor and targetobject. In order to prevent satura-tion, make sure that the brightnessof the light source is correct.
Keep the lighting of the partto be inspected constant.Avoid brightness fluctuationscaused by ambient light, sunlightor other external light sources.These fluctuations are the mostfrequent cause of errors in imageprocessing and are often difficultto identify. Errors can be limited bydecreasing the exposure time ofthe sensor. External lighting maybe required in addition to the lightinside the sensor. Alternative solu-tions include covers or any kindof physical screen that specificallycontrols the light within the inspec-tion area.
How should the field of viewbe illuminated?The entire image area should beilluminated as evenly as possible.Avoid extremely bright pointsor dark areas. The componentfeatures you wish to inspectshould, however, contrast as muchas possible and show up clearlyon the background. If you wish tocheck whether a specific featureis present, you can illuminate thecomponent so that a clear shadowis cast upon the feature you wishto detect. The Vision Sensor canthen detect the feature.
How should reflectivecomponents be illuminated?When inspecting highly reflec-tive surfaces, the sensor must bemounted with extreme care and ifnecessary an external light shouldbe attached to a suitable bracketin order to maximum the contrastbetween the detected object andthe background.
SpotlightA spotlight is perfect for the precision illumination of specific areas.Greater inspection distances can be implemented if a spotlight isused. Unlike ring lights, spotlights can be attached in any positionand the light swiveled towards the area that you wish to illuminate.
Dark field illuminationThe dark field light allows you to illuminate and identify scratches,dents and impurities on surfaces extremely well. The dark field lightmust be attached to the detection object at a distance of10…20 mm so that the surfaces on the component can be in-spected. If the diameter of the dark field is insufficient, two or moreline lights can also be installed to implement this type of illumination.
Ring lightsRing lights are used as additional incident lights. The design ofthe light and powerful integral LEDs ensure virtually shadow freeillumination with a high degree of intensity. Ring lights are particularlysuited to applications where the distance between the BVS and thedetected object is greater than 300 mm. Due to the high intensity ofthe light generated, these lights can also be used to suppress influ-ences from changing ambient light.The ring light can be fitted and aligned together with the VisionSensor using our mounting bracket specially adapted to the BalluffMounting System.As an accessory, we offer diffuser attachments that prevent strongreflections on shiny components, for example.
Line lightLine lights generate specific homogeneous lighting that brightens theimage area directly. When used for lateral illumination, the light cangenerate subtle reflections and shadows. The subtle reflection gen-erates an even illumination pattern without shiny areas. The shadowsgenerated allow you to check the presence or absence of featureson the object more easily.
AccessoriesOptimizing illumination –Process reliability
41n www.balluff.com
Series BAE LX-VS BAE LX-VS BAE LX-VSStyle Ring light Ring light Ring lightOrdering code BAE000J BAE000K BAE00ANPart number BAE LX-VS-RR100 BAE LX-VS-RI100 BAE LX-VS-RW100Supply voltage UB 24 V DC 24 V DC 24 V DCOperating current Normal 800 mA 800 mA 700 mA
Boost 1300 mA 1400 mA 1200 mATrigger 5...24 V DC 5...24 V DC 5...24 V DCMode Normal n n n
Boost n n n
Light field size Ø 100/60 mm Ø 100/60 mm Ø 100/60 mmEmitter, light type LED, red light LED, infrared LED, white lightWavelength 617 nm 875 nmDimension Ø 116×20.5 mm Ø 116×20.5 mm Ø 116×20.5 mmAttachment M4 screws M4 screws M4 screwsConnection M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pinHousing material Anodized aluminum Anodized aluminum Anodized aluminumOptical surface Glass Glass GlassWeight 360 g 360 g 360 gDegree of protection per IEC 60529 IP 65 IP 65 IP 65Eye safety perIEC 62471
Normal Extempt group Risk group 1 Extempt groupBoost Extempt group Risk group 1 Extempt group
Polarity reversal protected Yes Yes YesShort-circuit protected Yes Yes YesAmbient temperature range Ta –10...+55° C –10...+55° C –10...+55° CStorage temperature range –25...+75 °C –25...+75 °C –25...+75 °C
The diffuser attachment en-sures even light without disturbingreflections in applications withreflective surfaces. The diffuseris made of high-quality glass andcan be installed directly on thelight.
Light accessoriesSee page 49 for connectors.See page 52 for information onmounting brackets for directassembly or compatible withBalluff BMS mounting system.
Description Diffuser attachmentVersion for ring lightsOrdering code BAM01A7Part number BAM OF-VS-001-D-RX100
Diffuser attachment
AccessoriesRing lights
LightsConnectorsMountingcomponents
424242
AccessoriesLine lights
Light field 85 mm Light field 170 mm
Series BAE LX-VS BAE LX-VSStyle Line light Line lightOrdering code BAE00AP BAE00AZPart number BAE LX-VS-LR085 BAE LX-VS-LR170Supply voltage UB 24 V DC 24 V DCOperating current Normal 200 mA 400 mA
Boost 500 mA 800 mATrigger 5...24 V DC 5...24 V DCMode Normal n n
Boost n n
Light field size 10×79 mm 10×170 mmEmitter, light type LED, red light LED, red lightWavelength 617 nm 617 nmDimension 113.5×13×18 mm 197.5×13×18 mmAttachment M4 screws M4 screwsConnection M12 connector, 4-pin M12 connector, 4-pinHousing material Anodized aluminum Anodized aluminumOptical surface Glass GlassWeight 80 g 110 gDegree of protection per IEC 60529 IP 54 IP 54Eye safety perIEC 62471
Normal Extempt group Extempt groupBoost Extempt group Extempt group
Polarity reversal protected Yes YesShort-circuit protected Yes YesAmbient temperature range Ta –10...+55° C –10...+55° CStorage temperature range –25...+75 °C –25...+75 °C
Light accessoriesSee page 49 for connectors.See page 52 for information onmounting brackets for directassembly or compatible withBalluff BMS mounting system.
The line lights can illuminaterectangular areas right up to thecorners. Shadows can also begenerated in grooves and alongedges and then used for evalua-tion purposes.
43n www.balluff.com
LightsConnectorsMountingcomponents
Light field 85 mm Light field 170 mm Light field 85 mm Light field 170 mm
BAE LX-VS BAE LX-VS BAE LX-VS BAE LX-VSLine light Line light Line light Line lightBAE00AT BAE00AY BAE00AR BAE00AWBAE LX-VS-LI085 BAE LX-VS-LI170 BAE LX-VS-LW085 BAE LX-VS-LW17024 V DC 24 V DC 24 V DC 24 V DC200 mA 400 mA 200 mA 400 mA400 mA 800 mA 500 mA 900 mA5...24 V DC 5...24 V DC 5...24 V DC 5...24 V DC
n n n n
n n n n
10×71 mm 10×170 mm 10×83 mm 10×170 mmLED, infrared LED, infrared LED, white light LED, white light875 nm 875 nm113.5×13×18 mm 197.5×13×18 mm 113.5×13×18 mm 197.5×13×18 mmM4 screws M4 screws M4 screws M4 screwsM12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pinAnodized aluminum Anodized aluminum Anodized aluminum Anodized aluminumGlass Glass Glass Glass80 g 110 g 80 g 110 gIP 54 IP 54 IP 54 IP 54Extempt group Extempt group Extempt group Extempt groupRisk group 1 Risk group 1 Extempt group Extempt groupYes Yes Yes YesYes Yes Yes Yes–10...+55° C –10...+55° C –10...+55° C –10...+55° C–25...+75 °C –25...+75 °C –25...+75 °C –25...+75 °C
Ø 2.3both sides 6×3lowered (2×)
AccessoriesLine lights
44
Light field 25×25 mm
Series BAE LX-VSStyle Background lightOrdering code BAE000EPart number BAE LX-VS-HR025Supply voltage UB 24 V DCOperating current 225 mALight field size 25×25 mmEmitter, light type LED, red lightWavelength 617 nmDimension 105×80×9.5 mmAttachment M4 screwsConnection M12 connector, 4-pinHousing material Anodized aluminumOptical surface GlassWeight 66 gDegree of protection per IEC 60529 IP 54Eye safety per IEC 62471 Extempt groupPolarity reversal protected YesShort-circuit protected YesAmbient temperature range Ta –10...+55° CStorage temperature range –25...+75 °C
AccessoriesBackground lights
Background lights are suitable for thethrough beam method or subtle objectillumination. The contours of the object ap-pear sharper when these lights are used asbackground lights and allow you to makemore accurate comparisons.
Light accessoriesSee page 49 for connectors. See page52 for information on mounting bracketsfor direct assembly or compatible withBalluff BMS mounting system.
45n www.balluff.com
AccessoriesBackground lights
Light field 50×50 mm Light field 100×100 mm Light field 150×100 mm
BAE LX-VS BAE LX-VS BAE LX-VSBackground light Background light Background lightBAE000F BAE000H BAE00C5BAE LX-VS-HR050 BAE LX-VS-HR100 BAE LX-VS-HR15024 V DC 24 V DC 24 V DC225 mA 425 mA 500 mA50×50 mm 100×100 mm 150×100 mmLED, red light LED, red light LED, red light617 nm 617 nm 617 nm105×80×9.5 mm 155×130×9.5 mm 105×80×9.5 mmM4 screws M4 screws M4 screwsM12 connector, 4-pin M12 connector, 4-pin M12 connector, 4-pinAnodized aluminum Anodized aluminum Anodized aluminumGlass Glass Glass155 g 345 g 435 gIP 54 IP 54 IP 54Extempt group Extempt group Extempt groupYes Yes YesYes Yes Yes–10...+55° C –10...+55° C –10...+55° C–25...+75 °C –25...+75 °C –25...+75 °C
LightsConnectorsMountingcomponents
46
Series BAE LX-VS BAE LX-VSStyle Spotlight SpotlightOrdering code BAE002R BAE002TPart number BAE LX-VS-SR030-S75 BAE LX-VS-SW030-S75Supply voltage UB 24 V DC 24 V DCOperating current 100 mA 100 mATrigger 5...24 V DC 5...24 V DCLight field size Ø 30 mm Ø 30 mmEmitter, light type LED, red light LED, white lightWavelength 630 nmDimension Ø 40×89 mm Ø 40×89 mmAttachment M3 screws M3 screwsConnection M8 connector, 4-pin M8 connector, 4-pinHousing material Anodized aluminum Anodized aluminumOptical surface PMMA PMMAWeight 160 g 160 gDegree of protection per IEC 60529 IP 65 IP 65Eye safety per IEC 62471 Extempt group Extempt groupPolarity reversal protected Yes YesShort-circuit protected Yes YesAmbient temperature range Ta –10...+40° C –10...+40° CStorage temperature range –25...+70 °C –10...+70 °C
6.4
M8x1
Ø40
3.2
89
2
Ø30
8.5
Light accessoriesConnectors, see page 49.
AccessoriesSpotlights
47n
LightsConnectorsMountingcomponents
Series BAE LX-VSStyle Dark field illuminationOrdering code BAE00AMPart number BAE LX-VS-DR090Supply voltage UB 24 V DCOperating current 425 mALight field size Ø 90 mmEmitter, light type LED, red lightWavelength 617 nmDimension 105×80×9.5 mmAttachment M4 screwsConnection M12 connector, 4-pinHousing material Anodized aluminumOptical surface PMMAWeight 250 gDegree of protection per IEC 60529 IP 54Eye safety per IEC 62471 Extempt groupPolarity reversal protected YesShort-circuit protected YesAmbient temperature range Ta –10...+55° CStorage temperature range –25...+75 °C
Light accessoriesSee page 49 for connectors. See page52 for information on mounting bracketsfor direct attachment or compatible withthe Balluff BMS mounting system.
AccessoriesDark field illumination
nnn www.balluff.comwww.balluff.comwww.balluff.com
The dark field light allows youto illuminate surfaces in orderto clearly reveal indentations orscratches, so that they can beinspected quickly and reliably.
48
Use Connection cables forVision Sensors BVS-E and BVS-C
Parameterization cable forVision Sensors BVS-E
Style Straight female Straight female/RJ45Connector diagramand wiring
PIN 1: white PIN 5: brownPIN 2: green PIN 6: pinkPIN 3: yellow PIN 7: bluePIN 4: gray PIN 8: red
Power supply max. UB 10...30 V DC 10...30 V DCCable Molded MoldedNo. of wires × cross-section 8×0.25 mm² 4×0.34 mm²Degree of protection per IEC 60529 IP 68 IP 65Ambienttemperaturerange Ta
PUR –25...+70 °CPUR shielded –25...+80 °CPVC
Cable material Color Length Ordering codePart number
PUR Black 2 m
PUR Black 5 m BCC02H1BKS-AD-05-RJ45/GS180-05
PUR Black 10 m BCC02H2BKS-AD-05-RJ45/GS180-10
PUR shielded Black 5 m BCC0995BCC M418-0000-1A-046-PS0825-050
PUR shielded Black 10 m BCC0996BCC M418-0000-1A-046-PS0825-100
PVC Gray 2 m
PVC Gray 5 m
PVC Gray 10 m
AccessoriesConnectors – for quick connecting
3
1
2
4
7
56
8
I
3
12
4
21
34
II
7
56
8Shield to knurl
Shieldtoknurl
Shieldtohousing
Other cable materials, colorsand lengths on request.
More about our cablesand connectivity productscan be found in ourbrochures or online at:www.balluff.com
44.0
ØD
Ø 14.5
M12x1
49n www.balluff.com
Connection cable forconfigurator BVS-C
Connection cable for ring, background,dark field and line lights
Connection cable for spotlights
Straight female/straight female Straight female Straight female
PIN 1: brownPIN 2: whitePIN 3: bluePIN 4: black
PIN 1: brownPIN 2: whitePIN 3: bluePIN 4: black
10...30 V DC 250 V DC 30 V DCMolded Molded Molded8×0.25 mm² 4×0.34mm² 4×0.34mm²IP 68 per BWN Pr. 20 IP 68 IP 67–20...+80 °C –25...+80 °C –25...+80 °C
–5...+80 °C –5...+80 °C
Ordering codePart numberBCC06ER BCC032F BCC02N2BCC M418-M418-5A-322-PS0825-020 BCC M415-0000-1A-003-PX0434-020 BCC M314-0000-10-003-PX0434-020BCC06EP BCC032H BCC02N3BCC M418-M418-5A-322-PS0825-050 BCC M415-0000-1A-003-PX0434-050 BCC M314-0000-10-003-PX0434-050
BCC032J BCC02N4BCC M415-0000-1A-003-PX0434-100 BCC M314-0000-10-003-PX0434-100
BCC0367 BCC02PLBCC M415-0000-1A-003-VX8434-020 BCC M314-0000-10-003-VX8434-020BCC0368 BCC02PMBCC M415-0000-1A-003-VX8434-050 BCC M314-0000-10-003-VX8434-050BCC0369 BCC02PNBCC M415-0000-1A-003-VX8434-100 BCC M314-0000-10-003-VX8434-100
AccessoriesConnectors – for quick connecting
LightsConnectorsMountingcomponents
32.2
ØD
M8x1
Ø 9.7
44.0
ØD
Ø 14.5
M12x1
I
3
1
2
4
21
34
II
7
56
8
65
78
Shield to knurl
50
AccessoriesMechanical accessories –for easy installation
Description Mounting bracket Mounting bracketStyle for Vision Sensor BVS for Vision Sensor BVS and ring light BAE
Use for mounting on base plates or use ofclamping cylinders and mounting systemBMS
for mounting on base plates or use ofclamping cylinders and mounting systemBMS
Ordering code BAM00WN BAM01ACPart number BVS Z-MB-01 BAM MB-XA-003-B03-1Material GD-Zn Anodized aluminum
Mounting is part of optimal integration of theBVS Vision Sensor. The variety of differentmounting options allows you to integrateyour BVS ideally into your equipment. Balluffaccessories are perfectly matched to oursensors.With flexible Balluff accessories, you canposition the BVS quickly without elabo-rate preparatory work or time-consumingplanning, even if space is limited. You savematerial and time by using the right mount-ing element.
Ø33.1
50°
102
Ø4.2
3010
80
11
6.6
13.99
52
75
2525
40°
Ø25 50
61.75
8.7
4.2
21.2
8.55
61.75
30
A B
A
B
51n www.balluff.com
AccessoriesMechanical accessories –for easy installation
LightsConnectorsMountingcomponents
Mounting bracket Lock Display housingfor strip and background light BAE for Vision Sensor BVS focus ring for configurator with display
BAE PD-VS-001-Cfor mounting on base plates or use ofclamping cylinders and mounting systemBMS
for locking the preset focus for mounting of clamping cylinders andmounting system BMS
BAM01AE BAM01JH BAM01A8BAM MB-XA-002-B02-1 BAM FK-VS-002-02-1 BAM PC-AE-002-1Anodized aluminum Anodized aluminum Anodized aluminum
Focus ring lockBAM FK-VS-002-02-1The preset focus is locked andcannot be readjusted. Errorscaused by inadvertently adjust-ment of the focus are thereforeprevented. If the focus needs tobe readjusted, the focus lockcan be removed in seconds.
106
106
45
TS 35/7.5EN 50022
45
38
32.5
25
Ø4.2
7.5
7.5
1.35
3.75
3.75
8
3.75
3
30
35
55
43
60
30
3
40
Ø40.6
50°
Ø40
18.5
17.2
6.6
30
For clamping cylinderBMS CS-M-D12-IZ
52
Description Cross-connector Base holderStyle For 2 rods Ø 12 mm For 1 rod Ø 12 mm (vertical or horizontal)Use Connecting element for 2 rods For mounting on base
plates or extrusionsOrdering code BAM002Z BAM002WPart number BMS CC-M-D12-B-00 BMS CU-M-D12-A040-00Material Anodized aluminum Anodized aluminum
Mounting rods Ø 12 mm, anodized AlBMS RS-M-D12-0150-00 = 150 mmBMS RS-M-D12-0250-00 = 250 mmBMS RS-M-D12-1000-00 = 1000 mm (for user assembly)
The mounting rods are knurled full-length.This prevents any position change.
1×45° 1×45°
150
Ø11
.95
AccessoriesBMS Mounting System –simply align and mount
Use the Balluff BMSMounting SystemOptimized for tubular and block-style sensors, with the BMSMounting System you can attachyour Vision Sensor perfectly onbase plates and on all commonlyavailable profiles. Gain a high de-gree of flexibility and cover virtuallyany required spatial angle with thevariable accessories kit. Simplifyyour installation with supplemen-tary accessories such as reflectorholders or adapter plates.
More mounting accessories can befound in our "Accessories Line" catalogor online at: www.balluff.com
53n www.balluff.com
AccessoriesBMS Mounting System –simply align and mount
LightsConnectorsMountingcomponents
Base holder Clamping cylinder Adapter ringFor clamping cylinders for 2× clamping cylinders BMS CS-M-D12-IZFor mounting on baseplates or extrusions
for retaining holders, sensors and reflectors element for connecting 2 clamping cylinders
BAM0044 BAM0031 BAM003JBMS CU-M-D12-IO60-01 BMS CS-M-D12-IZ BMS AD-M-003-D12/IZStainless steel GD-Zn Anodized aluminum
33.5
3
10
20 –0.2
8.4
30
50.7
61.3
M5 nut
54
Sales and Logistics ServicesRetrieve product information online
CAD formats on the Cadenas PARTserver
The benefits to you– Faster and more efficient
designing– Free availability of all
Balluff catalog products– All common CAD formats– Convenient preview in 3D– Configurable products
– All catalog products are available: inductive sensors,photoelectric sensors, sensors for pneumatic cylinders,micropulse transducers, industrial RFID systems,vision sensors, mechanical multiple and single position switches,industrial networking and connectivity, and so on.
– Graphics reduced to the essentialsfor optimized performance
EPLAN macros – Electrical project planning made easyAnd now users of EPLAN electrical project planning software canalso profit from this free service.On our Web site planners and designers can download macros forselected Balluff products at no charge and implement them in theirdesign. These macros include all the necessary graphics, technicaland commercial information for the electrical design and documen-tation. Benefit from significant time and cost savings. Thanks tocomplete, non-redundant data you are assured of smooth transferof the various engineering phases such as preliminary and detailplanning, documentation or maintenance. To shorten overall projecttime and increase quality. Regardless of whether you need technicalmacros for creating wiring diagrams, ordering codes for purchas-ing, presentation images, etc., everything can be added to the CAEproject using drag-and-drop.This free service is available to all EPLAN users. If for some reasonany information is missing, simply get in touch with us. And sincethe commercial data are also integrated directly in the software da-tabase, the existing links from ERP systems to article managementcan still be used.
And here’s how it works– At www.balluff.com, go
to 3D data in the respectiveproduct area
– You are automatically redirect-ed to the Cadenas PARTserver
– Select a sensor andperform an optional checkvia 3D preview
– Add to shopping basket– Once you have entered your
details, the CAD files ofyour choice are sent to youby e-mail
55n www.balluff.com
Alphanumeric Directory
Orderingcode
Part number Page
BAE000E BAE LX-VS-HR025 44BAE000F BAE LX-VS-HR050 45BAE000H BAE LX-VS-HR100 45BAE000J BAE LX-VS-RR100 41BAE000K BAE LX-VS-RI100 41BAE002R BAE LX-VS-SR030-S75 46BAE002T BAE LX-VS-SW030-S75 46BAE009C BAE PD-VS-001-C 31BAE00AM BAE LX-VS-DR090 47BAE00AN BAE LX-VS-RW100 41BAE00AP BAE LX-VS-LR085 42BAE00AR BAE LX-VS-LW085 43BAE00AT BAE LX-VS-LI085 43BAE00AW BAE LX-VS-LW170 43BAE00AY BAE LX-VS-LI170 43BAE00AZ BAE LX-VS-LR170 42BAE00C5 BAE LX-VS-HR150 45BAM002W BMS CU-M-D12-A040-00 52BAM002Z BMS CC-M-D12-B-00 52BAM0031 BMS CS-M-D12-IZ 53BAM003J BMS AD-M-003-D12/IZ 53BAM0044 BMS CU-M-D12-IO60-01 53BAM00WN BVS Z-MB-01 50BAM01A7 BAM OF-VS-001-D-RX100 41BAM01A8 BAM PC-AE-002-1 51BAM01AC BAM MB-XA-003-B03-1 50BAM01AE BAM MB-XA-002-B02-1 51BAM01JH BAM FK-VS-002-02-1 51BCC02H1 BKS-AD-05-RJ45/GS180-05 48BCC02H2 BKS-AD-05-RJ45/GS180-10 48BCC02N2 BCC M314-0000-10-003-PX0434-020 49BCC02N3 BCC M314-0000-10-003-PX0434-050 49BCC02N4 BCC M314-0000-10-003-PX0434-100 49BCC02PL BCC M314-0000-10-003-VX8434-020 49BCC02PM BCC M314-0000-10-003-VX8434-050 49BCC02PN BCC M314-0000-10-003-VX8434-100 49BCC032F BCC M415-0000-1A-003-PX0434-020 49BCC032H BCC M415-0000-1A-003-PX0434-050 49BCC032J BCC M415-0000-1A-003-PX0434-100 49BCC0367 BCC M415-0000-1A-003-VX8434-020 49BCC0368 BCC M415-0000-1A-003-VX8434-050 49BCC0369 BCC M415-0000-1A-003-VX8434-100 49BCC06EP BCC M418-M418-5A-322-PS0825-050 49BCC06ER BCC M418-M418-5A-322-PS0825-020 49BCC0995 BCC M418-0000-1A-046-PS0825-050 48BCC0996 BCC M418-0000-1A-046-PS0825-100 48BVS0001 BVS ID-3-001-E 33BVS0003 BVS OI-3-001-E 27BVS0004 BVS OI-3-002-E 27BVS0005 BVS OI-3-003-E 27BVS0006 BVS OI-3-004-E 27BVS0007 BVS OI-3-013-C 31BVS0008 BVS OI-3-011-C 31BVS0009 BVS Z-SK-OI-02 35BVS000A BVS Z-SK-OI-01 35BVS000C BVS OI-3-006-E 27BVS000E BVS OI-3-005-E 27BVS000J BVS OI-3-051-E 29BVS000K BVS OI-3-053-E 29BVS000L BVS OI-3-055-E 29BVS000M BVS Z-SK-OI-03 35BVS000N BVS OI-3-054-E 29BVS000P BVS OI-3-052-E 29BVS000R BVS OI-3-056-E 29BVS000T BVS ID-3-003-E 33BVS000U BVS Z-SK-ID-04 35
Part number Orderingcode
Page
BAE LX-VS-DR090 BAE00AM 47BAE LX-VS-HR025 BAE000E 44BAE LX-VS-HR050 BAE000F 45BAE LX-VS-HR100 BAE000H 45BAE LX-VS-HR150 BAE00C5 45BAE LX-VS-LI085 BAE00AT 43BAE LX-VS-LI170 BAE00AY 43BAE LX-VS-LR085 BAE00AP 42BAE LX-VS-LR170 BAE00AZ 42BAE LX-VS-LW085 BAE00AR 43BAE LX-VS-LW170 BAE00AW 43BAE LX-VS-RI100 BAE000K 41BAE LX-VS-RR100 BAE000J 41BAE LX-VS-RW100 BAE00AN 41BAE LX-VS-SR030-S75 BAE002R 46BAE LX-VS-SW030-S75 BAE002T 46BAE PD-VS-001-C BAE009C 31BAM FK-VS-002-02-1 BAM01JH 51BAM MB-XA-002-B02-1 BAM01AE 51BAM MB-XA-003-B03-1 BAM01AC 50BAM OF-VS-001-D-RX100 BAM01A7 41BAM PC-AE-002-1 BAM01A8 51BCC M314-0000-10-003-PX0434-020 BCC02N2 49BCC M314-0000-10-003-PX0434-050 BCC02N3 49BCC M314-0000-10-003-PX0434-100 BCC02N4 49BCC M314-0000-10-003-VX8434-020 BCC02PL 49BCC M314-0000-10-003-VX8434-050 BCC02PM 49BCC M314-0000-10-003-VX8434-100 BCC02PN 49BCC M415-0000-1A-003-PX0434-020 BCC032F 49BCC M415-0000-1A-003-PX0434-050 BCC032H 49BCC M415-0000-1A-003-PX0434-100 BCC032J 49BCC M415-0000-1A-003-VX8434-020 BCC0367 49BCC M415-0000-1A-003-VX8434-050 BCC0368 49BCC M415-0000-1A-003-VX8434-100 BCC0369 49BCC M418-0000-1A-046-PS0825-050 BCC0995 48BCC M418-0000-1A-046-PS0825-100 BCC0996 48BCC M418-M418-5A-322-PS0825-020 BCC06ER 49BCC M418-M418-5A-322-PS0825-050 BCC06EP 49BKS-AD-05-RJ45/GS180-05 BCC02H1 48BKS-AD-05-RJ45/GS180-10 BCC02H2 48BMS AD-M-003-D12/IZ BAM003J 53BMS CC-M-D12-B-00 BAM002Z 52BMS CS-M-D12-IZ BAM0031 53BMS CU-M-D12-A040-00 BAM002W 52BMS CU-M-D12-IO60-01 BAM0044 53BVS ID-3-001-E BVS0001 33BVS ID-3-003-E BVS000T 33BVS OI-3-001-E BVS0003 27BVS OI-3-002-E BVS0004 27BVS OI-3-003-E BVS0005 27BVS OI-3-004-E BVS0006 27BVS OI-3-005-E BVS000E 27BVS OI-3-006-E BVS000C 27BVS OI-3-011-C BVS0008 31BVS OI-3-013-C BVS0007 31BVS OI-3-051-E BVS000J 29BVS OI-3-052-E BVS000P 29BVS OI-3-053-E BVS000K 29BVS OI-3-054-E BVS000N 29BVS OI-3-055-E BVS000L 29BVS OI-3-056-E BVS000R 29BVS Z-MB-01 BAM00WN 50BVS Z-SK-ID-04 BVS000U 35BVS Z-SK-OI-01 BVS000A 35BVS Z-SK-OI-02 BVS0009 35BVS Z-SK-OI-03 BVS000M 35
Sorted by part number Sorted by ordering code
56
Worldwide Sales
Headquarters
GermanyBalluff GmbHSchurwaldstrasse 973765 Neuhausen a.d.F.Phone +49 7158 173-0Fax +49 7158 [email protected]
Subsidiaries andRepresentatives
ArgentinaNortécnica S.R.L103 – Heredia 638B1672BKDVilla Lynch – San MartinPcia. de Buenos AiresPhone +54 11 47573129Fax +54 11 [email protected]
AustraliaBalluff-Leuze Pty. Ltd.12 Burton CourtBayswater VIC 3153Phone +61 397 204100Fax +61 397 [email protected]
AustriaBalluff GmbHIndustriestrasse B162345 Brunn am GebirgePhone +43 2236 32521-0Fax +43 2236 [email protected]
BelarusAutomaticacentre OOO.Nezavisimosti Av. 185,Block 19, Office 3220125 MinskPhone +375 17 2181713Fax +375 17 [email protected]
BelgiumBalluff bvbaResearchpark Haasrode 1820Interleuvenlaan 62,3001 LeuvenPhone +32 16 397800Fax +32 16 [email protected]
BrazilBalluff ControlesElétricos Ltda.Rua Francisco Foga, 25Distrito IndustrialCEP 13280.000Vinhedo – Sao PauloPhone +55 19 38769999Fax +55 19 [email protected]
BulgariaBPS AG41, Nedelcho Bonchev St.1528 SofiaPhone +359 2 9609875Fax +359 2 [email protected]
CanadaBalluff Canada Inc.2840 Argentia Road, Unit 2Mississauga, Ontario L5N 8G4Phone +1 905 816-1494Toll-free 1-8 00-927-9654Fax +1 905 [email protected]
ChileBalluff ControlesElétricos Ltda.,Brazil
ChinaBalluff (Shanghai) Trading Co. Ltd.Room 337, Xinxing Building2005 Yanggao Rd. North200131 ShanghaiTel. +86 21 51698788, 50644131Fax +86 21 50644131, [email protected]
ColumbiaBalluff ControlesElétricos Ltda.,Brazil
CroatiaHSTEC d.d.Zagrebacka 10023000 ZadarPhone +385 23 205-405Fax +385 23 [email protected]
Czech RepublicBalluff CZ, s.r.oPelušková 1400198 00 Praha 9 – KyjePhone +420 281 000 666Fax +420 281 [email protected]
DenmarkBalluff ApSÅbogade 158200 Århus NPhone +45 70 234929Fax +45 70 [email protected]
EgyptEGEC Taksym El Kodah-smouha24 St. El Helal El AhmerAlexandriaPhone +20 3 4299771Fax +20 3 [email protected]
FinlandMurri PääkonttoriKoukkukatu 115700 LahtiPhone +358 3 8824000Fax +358 3 [email protected]
FranceBalluff SASZI Nord de Torcy-Bat 3Rue des Tanneurs – BP 4877201 Marne La Vallée Cedex 1Phone +33 1 64111990Fax +33 1 [email protected]
GreeceS. NAZOS S.A.10 KLM Thessalonikis-KilkisP.O. Box 57008ThessalonikiPhone +30 2310 462120Fax +30 2310 [email protected]
Hong KongSensortech CompanyNo. 43, 18th StreetHong Lok Yuen,Tai Po, NTPhone +852 26510188Fax +852 [email protected]
HungaryBalluff Elektronika Kft.Pápai út. 55.8200 VeszprémPhone +36 88 421808Fax +36 88 [email protected]
IndiaBalluff India405 Raikar ChambersDeonar Village Road,Govandi, Mumbai 400088Phone +91 22 67551646Fax +91 22 [email protected]
IndonesiaPT. Multiguna CemerlangBumi Serpong Damai Sektor XIMultipurpose Industrial BuildingBlock H 3-31Serpong Tangerang15314 BantenPhone +62 21 75875555Fax +62 21 [email protected]
IsraelAncitech Ltd.19, Hamashbir St.Industrial Zone Holon58853 HolonPhone +972 3 5568351Fax +972 3 [email protected]
ItalyBalluff Automation S.R.L.Via Morandi 410095 Grugliasco, TorinoPhone +39 11 3150711Fax +39 11 [email protected]
JapanBalluff Co., Ltd.Ishikawa Bldg. 2nd Fl.1-5-5 Yanagibashi, Taito-KuTokyo 111-0052Tel. +81 03 5833-5440Fax +81 03 [email protected]
Kazakhstanelcos electric control systems2A, Molodezhniy Str. 3Dblock O., offices 318-319050061 AlmatyPhone +7 727 3340536Fax +7 727 [email protected]
LithuaniaUAB InterautomatikaKęstučio 4708127 VilniusPhone +370 5 2607810Fax +370 5 [email protected]
MalaysiaSumber Engineering (M) Sdn. Bhd.20T 558 Jalan Subang 6077 Persiaran Subang,Sungai Penaga Industrial Parc47500 Subang Jaya, SelangorPhone +60 3 56334227Fax +60 3 [email protected]
Team Automation Systems (M) Sdn. Bhd.No. 26, 1st Floor, Jalan TTC 23,Taman Teknologi Cheng,75250 MelakaPhone +60 6 3366223Fax +60 6 [email protected]
MexicoBalluff de México S.A. de C.V.Prol. Av. Luis M. Vega #109Col. Ampliación CimatarioC.P. 76030Queretaro, Qro.Phone +52 442 2124882Fax +52 442 [email protected]
NetherlandsBalluff B.V.Kempenlandstraat 11H5262 GK VughtPhone +31 73 6579702Fax +31 73 [email protected]
New ZealandBalluff-Leuze Pty. Ltd.,Australia
NorwayPrimatec asLillesandsveien 444877 GrimstadPhone +47 37 258700Fax +47 37 [email protected]
PhilippinesTechnorand Sales Corporation803 Wilshire Annapolis Plaza,No. 11 Annapolis Street,San Juan, Metro Manila 1500Phone +63 2 7245006Fax +63 2 [email protected]
PolandBalluff Sp. z o.o.Ul. Muchoborska 1654-424 WrocławPhone +48 71 3384929Fax +48 71 [email protected]
PortugalLA2P Lda.Rua Teofilo Braga, 156 AEscrit. F – Edificio S. DomingosCabeco Do Mouro2785-122 S. Domingos De RanaPhone +351 21 4447070Fax +351 21 [email protected]
RomaniaEast Electric s.r.l.256 Basarabia Blvd.030352 BucurestiPhone +40 31 4016301Fax +40 31 [email protected]
57n www.balluff.com
Worldwide Sales
RussiaBalluff OOOM. Kaluzhskaja Street 15Building 17, Office 500119071 MoscowTel. +7 495 78071-94Fax +7 495 [email protected]
SerbiaENEL d.o.o.Ul. Vasilja Pavlovica 1014000 ValjevoPhone +381 14 291161Fax +381 14 [email protected]
SingaporeBalluff Asia Pte. Ltd.BLK 1004 Toa PayohInd. ParkLorong 8, #03-1489Singapore 319076Phone +65 62524384Fax +65 [email protected]
SlovakiaBalluff Slovakia s.r.o.Blagoevova 985104 BratislavaPhone +421 2 67200062Fax +421 2 [email protected]
SloveniaSenzorji SB d.o.o.,Proizvodnja,trgovina in storitve d.o.o.Livadna ulica 12204 Miklavž na Dravskem poljuPhone +386 2 6290300Fax +386 2 [email protected]
SpainBalluff S.L.Edificio Forum SCVPlanta 5°, Oficina 4°Carretera Sant Cugat a RubiKm01, 40-5008190 Sant Cugat del VallésBarcelonaPhone +34 93 5441313Fax +34 93 [email protected]
South AfricaPAL Distributers CCP.O. Box 211Randburg, 2125 JohannesburgPhone +27 11 7814381Fax +27 11 [email protected]
South KoreaMahani Electric Co. Ltd.792-7 Yeoksam-dongGangnam-kuSeoul 135-080Phone +82 2 21943300Fax +82 2 [email protected]
SwedenBalluff ABIndustrivägen 243361 SävedalenPhone +46 31 3408630Fax +46 31 [email protected]
SwitzerlandBalluff Sensortechnik AGRiedstrasse 68953 DietikonPhone +41 43 3223240Fax +41 43 [email protected]
TaiwanCanaan Electric Corp.6F-5, No. 63 Sec. 2Chang An East Road10455 TaipeiPhone +886 22 5082331Fax +886 22 [email protected]
ThailandCompomax Co. Ltd.16 Soi Ekamai 4,Sukhumvit 63 Rd.Prakanongnua, Vadhana,Bangkok 10110Phone +66 2 7269595Fax +66 2 [email protected]
TurkeyBalluff Sensor OtomasyonSanayi Ve Ticaret Ltd. Sti.Perpa Ticaret Is MerkeziA Blok, Kat 1-2-3No: 0013-001434381 Okmeydani/IstanbulPhone +90 212 3200411Fax +90 212 [email protected]
UkraineMicronlogistik LtdUl. Promyischlennaya Street 3765031 OdessaPhone +380 48 7781278Fax +380 48 [email protected]
United Kingdom and IrelandBalluff Ltd.4 Oakwater AvenueCheadle Royal Business ParkCheadle, Cheshire SK8 3SRPhone +44 161 282-4700Fax +44 161 [email protected]
USABalluff Inc.8125 Holton DriveFlorence, KY 41042-0937Phone +1 859 727-2200,Toll-free 1-800-543-8390Fax +1 859 [email protected]
VenezuelaBalluff ControlesElétricos Ltda.,Brazil
585858
Intelligent Sensor SolutionsThe whole product range for your needs
Take advantage of the broad performance spectrumfrom Balluff. And profit from maximum precision, evenin difficult areas.Balluff stands for comprehensive systems from a single source, con-tinuous innovation, the most modern technology, highest quality andgreatest reliability and prides itself on distinctive customer orienta-tion, custom-tailored solutions, fast worldwide service and outstand-ing application assistance. In short: for reliable, expert partnership.
Object Detection– Inductive Sensors BES– Sensors for Pneumatic Cylinders BMF– Magnetic Field Sensors BMF– Capacitive Sensors BCS– Ultrasonic Sensors BUS– Pressure Sensors BSP– Photoelectric Sensors BOS– Fiber Optic Amplifier BFB– Fork Sensors BGL– Dynamic Optical Windows BOWA– Light Grids BLG– Contrast Sensors BKT– Luminescence Sensors BLT– Color Sensors BFS– Mechanical Single and Multiple
Position Switches BNS– Inductive Single and Multiple
Position Switches BNS
Linear Position Sensing– Micropulse Transducers BTL– Magnetic Linear Encoder
Systems BML– Incremental Encoders BDG– Absolute Encoders BRG– Inductive Linear
Position Sensor BIW– Inductive Distance Sensors BAW– Magneto-inductive
Position Sensors BIL– Photoelectric Distance Sensors BOD– Ultrasonic Sensors BUS
Industrial Networkingand Connectivity– Connectors and Connection
Cables BCC– Passive Splitter Boxes BPI– Expansion Modules BNI– IO-Link– Inductive Couplers BIC– BUS Systems– Wireless– Electrical Devices
Industrial Identification– Industrial RFID Systems BIS– Vision Sensors BVS
Mechanical Accessories– Holders and Fasteners– Mounting System BMS
Company
Name,Department
Street
Postal Code/City
Phone
Fax +49 7158 173-299
Mechanical Product LineMechanical multiple and single position switchesMechanical multiple and single position switches to DIN EN 60204-1/VDE 0113Mechanical multiple and single position switches with forced openingMechanical multiple and single position switches with quick-change plunger unitInductive multiple and single position switchesInductive multiple and single position switches with extended switching distanceMechanical wireless position switchesMixed assembly multiple position switches
Sensor Product LineInductive sensors BES DC 3-/4-wireInductive sensors BES DC 2-wireInductive sensors BES AC/DCInductive sensors BES with special propertiesSensors for pneumatic cylinders BMFMagnetic field sensors BMFCapacitive sensors BCSUltrasonic sensors BUSPressure sensors BSP
Linear Position Sensing Product LineMicropulse® transducer BTL Profile seriesMicropulse® transducer BTL AT seriesMicropulse® transducer BTL Rod seriesMicropulse® transducer BTL Compact Rod seriesMicropulse® processors, BUS interfacesMagnetic linear encoder system BMLIncremental and absolute encoders BDG/BRGInductive linear position sensor BIWInductive distance sensors BAWMagneto-inductive position sensors BILPhotoelectric distance sensors BODUltrasonic sensors BUS
Industrial IdentificationIndustrial RFID systems BIS CIndustrial RFID Systems BIS LIndustrial RFID systems BIS MIndustrial RFID systems BIS SVision sensor BVS
Industrial Networking and ConnectivityConnectors and cables BCCPassive splitter boxes BPIActive splitter boxes BNIIO-LinkRemote inductive transmission systemsInductive couplers BICBUS systemsWirelessElectrical devices
Photoelectric Product LineDiffuse energetic BOS with fore- and background suppressionRetro-reflective sensors BOSThrough-beam sensors BOS (emitter/receiver)Fiber optic devices BFBThrough-beam fork sensors BGLDynamic optical windows BOWALight grids BLGContrast sensors BKTLuminescence sensors BLTColor sensors BFSPhotoelectric distance sensors BOD
Mechanical AccessoriesHolders and fastening systemsMounting system BMS
Please check and send fax!
Object Detection
Linear Position Sensing
Industrial Identification
Industrial Networking and Connectivity
Mechanical Accessories
Balluff GmbH Schurwaldstrasse 973765 Neuhausen a.d.F.GermanyPhone +49 7158 173-0Fax +49 7158 [email protected]
www.balluff.com Doc
. No.
858
278/
Mat
. No.
158
552
E ·
Edi
tion
1110
; Sub
ject
to m
odifi
catio
ns. R
epla
ces
Edi
tion
1010
.
Object Detection
Linear Position Sensing
Fluid Sensors
Industrial Identification
Industrial Networking and Connectivity
Mechanical Accessories
Inductive sensors BES, cylinder sensors BMF, magnetic field sensors BMF, capacitive sensors BCS for object detection, ultrasonic sensors BUS for object detection, photoelectric sensors BOS, fiber optic devices BFB, fiber optics BFO, angle sensors BWL, through-beam fork sensors BGL, optical window sensors BOW, light grids BLG, contrast sensors BKT, luminescence sensors BLT, color sensors BFS, mechanical and inductive single and multiple position switches BNS
Micropulse® transducers BTL, magnetic linear encoder system BML, incremental encoders BDG, absolute encoders BRG, inductive displacement system BIW, inductive positioning system BIP, inductive distance sensors BAW, magnetoinductive distance sensors BIL, capacitive distance sensors BCW, photoelectric distance sensors BOD, ultrasonic sensors BUS for analog distance measurement
Connectors and connection cables BCC, valve connectors BCC, passive splitter boxes BPI, active splitter boxes BNI, IO-Link, bus systems (Profibus, Profinet, CC-Link, DeviceNet, EtherNet), inductive couplers BIC, wireless systems BWT, power supplies BAE, electrical devices BAE
Brackets and mountings, assembly system BMS
Pressure sensors BSP, capacitive sensors BCS for level detection
Industrial RFID systems BIS, vision sensors BVS