BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center,...
Transcript of BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center,...
![Page 1: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/1.jpg)
03/2005 Part of Dynamic Controls Ltd
Temperature Pressure
ºC Bar
38 49.6
100 42.3
200 35.8
300 31.6
400 29.3
500 26.8
600 21.6
700 10.1
BV-HESA
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall,Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Pneumatically Actuated Bellows Sealed Globe Valve for High Temperature Applications
Bellows Sealed Globe Valve, Buttweld Ends with weld pups,
Bolted Bonnet, Hard faced seat and disk. Extended Spindle,
Piston Actuated. Replaceable Disk - Fully Maintainable
Actuator shown:
Line Pressure:- 50 Bar
Actuator Pressure:- 6 Bar
Actuation Pressure upto 50 Bar
Actuation media - Air, Nitrogen
Actuator can be fitted with:
Limit Switches
Manual override
Muffler
Open/Closed Indicator
Dimensions ‘C’ is for valve
with 800mm extension
spindle
Class 300 pressure rating
Pressure / Temperature
Dimensions (typical) Cv
Valve Size
DN
15
150
Dim
A mm
395
859
Dim
B mm
150
150
Dim
C mm
1375
2610
Dim
D mm
170
340
UK
Gal/min
2
307
Materials
Component
Body.
Weld ends
Bellows
Spindle
Seat Seal
Bonnet Seal
Packing
Bolts
Nuts
Material
St.St. ASTM A182 316/316H
St.St. ASTM A312 TP316
Hastalloy C276 / Inconel 600
St.St. ASTM A182 316/316H
Integral with Stellite Hard
Facing
Graphite
Graphite
St. ASTM A193 Gr B8
St. ASTM A194 Gr 8
1 of 34
![Page 2: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/2.jpg)
08/2004 Part of Dynamic Controls Ltd
BV-IUSM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Monel Bellows Sealed Valve Class 600 Bellows Sealed Globe Valve, Conventional Bore,
Outside Screw and Yoke, Non-rising Handwheel, Union
Bonnet
Available with integral Seat or Screwed in Stainless Steel
Seat
Valve can be supplied with Pneumatic Actuator Buttweld
End connections shown, also available as screwed,
socket weld, flanged or any special connection.
Maximum Pressure / Temperature ratings are restricted by
the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie.
C.St. ASTM A105 is not recommended for use above
425ºC.
If in doubt please ask, we will advise suitable materials for
the temperature, pressure and media.
Valve Size
DN DN6
DN10
DN15
DN20
DN25
Dim
A mm
101.6
101.6
108
117
127
Dimensions
Dim
B mm
180
180
190
195
200
Dim
C mm
100
100
100
100
100
Weight
Kg
3.5
3.5
4
4
4.5
Body
Material Specification
Monel Valve
Monel BS3076 NA13
Bonnet
Seat
Disk
Stem
Bellows
Back up Gland
Yoke Bush
Monel BS3076 NA13
St.St. Type 304L or
Integral
Colmonoy 5 or
Stellite HF
St. St. Type 321
St. St. Type 321
Exfoliated Graphite
Aluminium Bronze
2 of 34
![Page 3: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/3.jpg)
09/2007 Part of Dynamic Controls Ltd
BV-IUSN
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Glanded Needle Valve Class 600 Glanded Globe Needle Valve, Conventional
Bore, Outside Screw and Yoke, Non-rising Handwheel,
Union Bonnet
Available with integral Seat or Screwed in Stainless
Steel Seat or Soft seated with O ring in Disk Valve
can be supplied with Pneumatic Actuator Buttweld
End connections shown, also available as
screwed, socket weld, flanged or any special connection.
Maximum Pressure / Temperature ratings are restricted
by the valve end connections and the body / bonnet
materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie.
C.St. ASTM A105 is not recommended for use above
425ºC.
If in doubt please ask, we will advise suitable materials
for the temperature, pressure and media.
Valve Size
DN DN6
DN10
DN15
DN20
DN25
Dim
A mm
100
100
100
100
152
Dimensions
Dim
B mm
150
150
160
175
200
Dim
C mm
100
100
100
100
120
Weight
Kg
3.5
3.5
4
4
7
Body
Material Specification
Monel Valve
St. St. Type 304L
Bonnet
Seat
Disk
Stem
Gland Bush
Back up Gland
Yoke Bush
St. St. Type 304L
St.St. Type 304L or
Hard Faced
St. St. Type 304L
St. St. Type 304L
St. St. Type 304L
PTFE
Aluminium Bronze
3 of 34
![Page 4: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/4.jpg)
BV-IUSS
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Bellows Sealed Valve Class 600 Bellows Sealed Globe Valve, Conventional Bore,
Outside Screw and Yoke, Non-rising Handwheel, Union
Bonnet
Available with integral Seat or Screwed in Stainless Steel
Seat or Soft seated with O ring in Disk
Valve can be supplied with Pneumatic Actuator Buttweld
End connections shown, also available as screwed,
socket weld, flanged or any special connection.
Maximum Pressure / Temperature ratings are restricted by
the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie.
C.St. ASTM A105 is not recommended for use above
425ºC.
If in doubt please ask, we will advise suitable materials for
the temperature, pressure and media.
Valve Size
DN DN6
DN10
DN15
DN20
DN25
Dim
A mm
101.6
101.6
108
117
127
Dimensions
Dim
B mm
180
180
190
195
200
Dim
C mm
100
100
100
100
100
Weight
Kg
3.5
3.5
4
4
4.5
Body
Material Specification
Monel Valve
St. St. Type 316L
Bonnet
Seat
Disk
Stem
Bellows
Back up Gland
Yoke Bush
St. St. Type 316L
St.St. Type 316L or
Integral
St. St. Type 316L with/
without Viton seal
St. St. Type 316L
St. St. Type 316L
PTFE
Aluminium Bronze
11/2004 Part of Dynamic Controls Ltd
4 of 34
![Page 5: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/5.jpg)
09/2010 Part of Dynamic Controls Ltd
316 Stainless Steel 304 Stainless Steel Body St.St. ASTM A182 F316 St.St. ASTM A182 F304
Bonnet St.St. ASTM A182 F316 St.St. ASTM A182 F304
Seat St.St. Type 316 or St.St. Type 304 or
Integral Stellite hard faced Integral Stellite hard faced
Disk St.St. Type 316 or St.St. Type 316 or
St.St. Type 316 hard faced St.St. Type 316 hard faced
Stem St.St. ASTM A182 F316 St.St. ASTM A182 F316
Bellows St.St. Type 316 St.St. Type 316
Back up Gland Exfoliated Graphite Exfoliated Graphite
Yoke Bush Aluminum Bronze Aluminum Bronze
BV-LMPF5M
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall,Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Liquid Metal Bellow Sealed Globe Valve – Lip-seal Welded
Bonnet
Class 1500 Bellows Sealed Globe Valve, Conventional Bore, Outside
Screw and Yoke, Bolted and lip-seal welded Bonnet.
Secondary Gland in the event of bellows failure.
Available with Integral Hard Faced Seat to offer increased resistance
against erosion.
Valve can be supplied with manual operation or Actuated - Electric or
Pneumatic. Manual Valve and Electrically Actuated Valve shown
Manually Operated Electrically Actuated
Size Length A Height B Weight Height D Length E Weight Cv
DN/NPS mm/in mm/in Kg/lb mm/in mm/in Kg/lb IGPM/USGPM
DN8/3/8” 323/12.72 305/12 17.2/38 TBA 323/12.72 7/8.4
DN15/½” 323/12.72 305/12 17.2/38 TBA 323/12.72 7/8.4
DN20/¾” 323/12.72 305/12 18.6/41 TBA 323/12.72 Please
12.9/15.4
DN25/1” 407/16.03 311/12.25 19.5/43 TBA 407/16.03 Ask
20.8/25
DN40/1½” 407/16.03 345/13.58 28.1/62 TBA 407/16.03 For
39/46.8
DN50/2” 437/17.2 371/14.6 76.2/168 TBA 437/17.2 Details
92/110
DN65/2½” 437/17.2 400/15.75 80.3/177 TBA 437/17.2 125/150
DN80/3” 508/20 508/20 137/302 TBA 508/20 213/255
DN100/4” 508/20 577/22.72 231/510 TBA 508/20 260/312
Materials Valve Shown is with a leak
detection port, to provide
early warning of any bellows
failure.
Extended Spindles, type and
length are designed to suit
customer requirements.
Weights shown are without
extended spindle.
Pneumatically Actuated valves
are available.
5 of 34
![Page 6: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/6.jpg)
04/2011 Part of Dynamic Controls Ltd
BV-LMPFEM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall,Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Liquid Metal Bellow Sealed Globe Valve – Lip-seal Welded
Bonnet – Extended Spindle Class 900 Bellows Sealed Globe Valve, Conventional Bore, Outside
Screw and Yoke, Bolted and lip-seal welded Bonnet, with universal joint
extended spindle. ASME III option available.
Secondary Gland in the event of bellows failure.
Available with Integral Hard Faced Seat to offer increased resistance
against erosion.
Valve can be supplied with manual operation or Actuated - Electric or
Pneumatic. Manual Valve shown
Dimensions (typical) Size Length A Weight Cv
DN/NPS mm/in Kg/lb I GPM/USGPM
DN8/3/8” 288/11.34 13.8/30.5 7/8.4
DN15/½” 288/11.34 13.8/30.5 7/8.4
DN20/¾” 288/11.34 13.8/30.5 12.9/15.4
DN25/1” 288/11.34 13.8/30.5 20.8/25
DN40/1½” 323/12.72 24.1/53.1 39/46.8
DN50/2” 407/16.03 46.8/103 92/110
DN65/2½” 407/16.03 46.8/103 125/150
DN80/3” 437/17.2 97.7/215 213/255
DN100/4” 427/16.82 183/403 260/312
Valve Shown is with a leak
Materials
316 Stainless Steel 304 Stainless Steel
Body St.St. ASME SA182 F316 St.St. ASME SA182 F304
Bonnet St.St. ASME SA182 F316 St.St. ASME SA182 F304
Seat St.St. ASME SA479 F316 or St.St. ASME SA479 F304 or
Integral Stellite hard faced Integral Stellite hard faced
Disk St.St. ASME SA479 316 or St.St. ASME SA479 F304 or
St.St. Type 316 hard faced St.St. Type 304 hard faced
Stem St.St. ASTM A182 F316 St.St. ASTM A182 F304
Bellows St.St. Type 316 St.St. Type 316
Back up Gland Exfoliated Graphite Exfoliated Graphite
Yoke Bush Aluminum Bronze Aluminum Bronze
detection port, to provide
early warning of any bellows
failure.
Extended Spindles, type and
length are designed to suit
customer requirements.
Weights shown are without
extended spindle.
Extended spindle shown is
with intermediate seal/support
at the bulge wall level. Design
without intermediate stage are
available.
6 of 34
![Page 7: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/7.jpg)
04/2011 Part of Dynamic Controls Ltd
316 Stainless Steel 304 Stainless Steel Body St.St. ASME SA182 F316 St.St. ASME SA182 F304
Bonnet St.St. ASME SA182 F316 St.St. ASME SA182 F304
Seat St.St. ASME SA479 F316 or St.St. ASME SA479 F304 or
Integral Stellite hard faced Integral Stellite hard faced
Disk St.St. ASME SA479 F316 or St.St. ASME SA479 F304 or
St.St. Type 316 hard faced St.St. Type 304 hard faced
Stem St.St. ASME SA479 F316 St.St. ASME SA479 F304
Bellows St.St. Type 316/316L St.St. Type 316/316L
Back up Gland Exfoliated Graphite Exfoliated Graphite
Yoke Bush Aluminum Bronze Aluminum Bronze
BV-LMPFLM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall,Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Liquid Metal Bellow Sealed Globe Valve – Lip-seal Welded
Bonnet Class 900 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and
Yoke, Bolted and lip-seal welded Bonnet. ASME III option available.
Secondary Gland in the event of bellows failure.
Available with Integral Hard Faced Seat to offer increased resistance against
erosion.
Valve can be supplied with manual operation or Actuated - Electric or Pneu-
matic. Manual Valve and Electrically Actuated Valve shown
Manually Operated Electrically Actuated
Size Length A Height B Weight Height D Length E Weight Cv
DN/NPS mm/in mm/in Kg/lb mm/in mm/in Kg/lb IGPM/USGPM
DN8/3/8” 288/11.34 245/9.65 13.8/30.5 551/21.7 245/9.65 7/8.4
DN15/½” 288/11.34 245/9.65 13.8/30.5 551/21.7 245/9.65 7/8.4
DN20/¾” 288/11.34 245/9.65 13.8/30.5 551/21.7 245/9.65
DN25/1” 288/11.34 245/9.65 13.8/30.5 551/217 245/9.65
DN40/1½” 323/12.72 293/11.54 24.1/53.1 585/23.03 293/11.54
DN50/2” 407/16.03 311/12.25 46.8/103 605/23.8 311/12.25
Please
Ask
For
Details
12.9/15.4
20.8/25
39/46.8
92/110
DN65/2½” 407/16.03 311/12.25 46.8/103 605/23.8 311/12.25 125/150
DN80/3” 437/17.2 420/16.54 97.7/215 742/29.2 420/16.54 213/255
DN100/4” 427/16.82 443/17.45 183/403 775/30.5 443/17.45 260/312
Materials
Valve Shown is with a leak
detection port, to provide
early warning of any bellows
failure.
Extended Spindles, type and
length are designed to suit
customer requirements.
Weights shown are without
extended spindle.
Pneumatically Actuated valves
are available.
7 of 34
![Page 8: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/8.jpg)
10/2012 Part of Dynamic Controls Ltd
316LN Stainless Steel 304 Stainless Steel Body St.St. ASME SA182 F316LN St.St. ASME SA182 F304
Bonnet St.St. ASME SA182 F316LN St.St. ASME SA182 F304
Seat St.St. ASME SA479 F316 or St.St. ASME SA479 F304 or
Integral Stellite hard faced Integral Stellite hard faced
Disk St.St. ASME SA479 F316 or St.St. ASME SA479 F304 or
St.St. Type 316 hard faced St.St. Type 304 hard faced
Stem St.St. ASME SA479 F316LN St.St. ASME SA479 F304
Bellows St.St. Type 316/316L St.St. Type 316/316L
Back up Gland Exfoliated Graphite Exfoliated Graphite
Yoke Bush Aluminum Bronze Aluminum Bronze
BV-LMPFLN
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall,Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Liquid Metal Bellow Sealed Globe Valve – Lip-seal Welded
Bonnet Class 900 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and
Yoke, Bolted and lip-seal welded Bonnet. ASME III option available.
Secondary Gland in the event of bellows failure.
Available with Integral Hard Faced Seat to offer increased resistance against
erosion.
Valve can be supplied with manual operation or Actuated - Electric or Pneu-
matic. Manual Valve and Electrically Actuated Valve shown
Manually Operated Electrically Actuated
Size Length A Height B Weight Height D Length E Weight Cv
DN/NPS mm/in mm/in Kg/lb mm/in mm/in Kg/lb IGPM/USGPM
DN8/3/8” 288/11.34 245/9.65 13.8/30.5 551/21.7 245/9.65 7/8.4
DN15/½” 288/11.34 245/9.65 13.8/30.5 551/21.7 245/9.65 7/8.4
DN20/¾” 288/11.34 245/9.65 13.8/30.5 551/21.7 245/9.65
DN25/1” 288/11.34 245/9.65 13.8/30.5 551/217 245/9.65
DN40/1½” 323/12.72 293/11.54 24.1/53.1 585/23.03 293/11.54
DN50/2” 407/16.03 311/12.25 46.8/103 605/23.8 311/12.25
Please
Ask
For
Details
12.9/15.4
20.8/25
39/46.8
92/110
DN65/2½” 407/16.03 311/12.25 46.8/103 605/23.8 311/12.25 125/150
DN80/3” 437/17.2 420/16.54 97.7/215 742/29.2 420/16.54 213/255
DN100/4” 427/16.82 443/17.45 183/403 775/30.5 443/17.45 260/312
Materials
Valve Shown is with a leak
detection port, to provide
early warning of any bellows
failure.
Extended Spindles, type and
length are designed to suit
customer requirements.
Weights shown are without
extended spindle.
Pneumatically Actuated valves
are available.
8 of 34
![Page 9: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/9.jpg)
4/2011 Part of Dynamic Controls Ltd
BV-OBCM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Cartridge Valve - Oblique Pattern
Class 600 Bellows Sealed Globe Valve, Conven-
tional Bore, Outside Screw and Yoke, Non-rising
Handwheel, Bolted Bonnet. To BSEN15761 or
Nuclear Class to ASME III available
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles alao available
Buttweld end connections shown, also avail-
able as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, seat and all
seals are removed with the
top assembly.
This leaves only body left
in line.
Maintainence time reduced
significantly. Increases
safety, no danger of seals
being lost down line or seat
not being fitted.
Maximum Pressure / Temperature ratings are restricted by the
valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC.
Materials can be changed to customer specifications.
Dimensions
Valve Size Dim A mm Dim B mm Weight Kg Cv UKGPM
DN8 (1/4”) 165 220 11 2
DN15 (1/2”) 165 220 11 5.8
DN20 (3/4”) 190 220 11 5.8
DN25 (1”) 216 230 12.5 11
DN40 (1 1/2”) 241 320 30 30
DN50 (2”) 292 390 35 54
DN80 (3”) 356 490 230 153
DN100 (4”) 432 502 270 267
DN150 (6”) 559 760 298 690
Dimensions
Body St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Bonnet St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Seat St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Seat Seal Perlast or Kalrez Seal
Disk St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Stem St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Bellows St.St. Type 316L
Back-up-Gland Graphite
9 of 34
![Page 10: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/10.jpg)
05/2011 Part of Dynamic Controls Ltd
BV-OBCM15
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Cartridge Valve - Oblique Pattern
Class 1500 Bellows Sealed Globe Valve,
Conventional Bore, Outside Screw and Yoke,
Non-rising Handwheel, Bolted Bonnet. To
BSEN15761 or Nuclear Class to ASME III
available
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles also available
Buttweld end connections shown, also avail-
able as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, seat and all
seals are removed with the
top assembly.
This leaves only body left
in line.
Maintainence time reduced
significantly. Increases
safety, no danger of seals
being lost down line or seat Maximum Pressure / Temperature ratings are restricted by the not being fitted. valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC.
Materials can be changed to customer specifications.
Dimensions
Valve Size Dim A mm Dim B mm Weight Kg Cv UKGPM
DN8 (1/4”) 229 242 13 2
DN15 (1/2”) 229 242 13 5.8
DN20 (3/4”) 229 245 13 5.8
DN25 (1”) 254 260 15.5 11
DN40 (1 1/2”) 305 350 35 30
DN50 (2”) 368 420 40 54
DN80 (3”) 381 540 250 153
DN100 (4”) 457 562 295 267
DN150 (6”) 610 820 320 690
Dimensions
Body St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Bonnet St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Seat St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Seat Seal Perlast or Kalrez Seal
Disk St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Stem St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Bellows St.St. Type 316L
Back-up-Gland Graphite
10 of 34
![Page 11: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/11.jpg)
05/2011 Part of Dynamic Controls Ltd
BV-OBTM15
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed - Oblique Pattern
Class 1500 Bellows Sealed Globe Valve,
Conventional Bore, Outside Screw and Yoke,
Non-rising Handwheel, Bolted Bonnet. To
BSEN15761 or Nuclear Class to ASME III
available
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles also available
Buttweld end connections shown, also avail-
able as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, version also available -
seat and all seals are removed with the top
assembly.
This leaves only body left in line.
Maintainence time reduced significantly.
Increases safety, no danger of seals being
lost down line or seat not being fitted.
Maximum Pressure / Temperature ratings are restricted by the
valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC.
Materials can be changed to customer specifications.
Dimensions
Valve Size Dim A mm Dim B mm Weight Kg Cv UKGPM
DN8 (1/4”) 229 242 13 2
DN15 (1/2”) 229 242 13 5.8
DN20 (3/4”) 229 245 13 5.8
DN25 (1”) 254 260 15.5 11
DN40 (1 1/2”) 305 350 35 30
DN50 (2”) 368 420 40 54
DN80 (3”) 381 540 250 153
DN100 (4”) 457 562 295 267
DN150 (6”) 610 820 320 690
Dimensions
Body St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Bonnet St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Seat St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L / HF
Seat Seal Stainless Steel/Graphite
Disk St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L / HF
Stem St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Bellows St.St. Type 316L
Back-up-Gland Graphite
11 of 34
![Page 12: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/12.jpg)
04/2011 Part of Dynamic Controls Ltd
BV-TBCM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Cartridge Valve Class 600 Bellows Sealed Globe Valve, Conven-
tional Bore, Outside Screw and Yoke, Non-rising
Handwheel, Bolted Bonnet. To BSEN15761 or
Nuclear Class to ASME III available
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles alao available
Buttweld end connections shown, also avail- able
as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, seat and all
seals are removed with the
top assembly.
This leaves only body left
in line.
Maintainence time reduced
significantly. Increases
safety, no danger of seals
being lost down line or seat
not being fitted.
Maximum Pressure / Temperature ratings are restricted by
the valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC.
Materials can be changed to customer specifications.
Dimensions
Valve Size
DN DN8
DN15
DN20
DN25
DN40
DN50
DN80
DN100
DN150
Dim
A mm
108
108
117
127
165
203
356
406
559
Dim
B mm
243
243
243
256
368
400
500
521
780
Weight
Kg
9
9
9
9.6
24
25
202
240
278
Cv
IGPM
1.7
2.45
2.45
5.8
12.4
18.5
37
76
260
Material Specification
Body
Bonnet
Seat
Seat Seal
Disk
Stem
Bellows
Back up Gland
St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Perlast or Kalrez Seal
St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
St.St. BSEN 10088-3 1.4307
St.St. Type 316L
Graphite
12 of 34
![Page 13: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/13.jpg)
04/2011 Part of Dynamic Controls Ltd
BV-TBCM25N
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Class 2500 Bellows Sealed Cartridge Valve - Nuclear
Class 2500 Bellows Sealed Globe Valve designed to
ASME III, Conventional Bore, Outside Screw and Yoke,
Non-rising Handwheel, Bolted Bonnet.
Seal Welded Bonnet version available.
Also available with Integral Hard Faced Seat or Screwed
in Stainless Steel Seat.
Valve can be supplied with Actuator - Electric or
Pneumatic.
Buttweld end connections shown, also available as
screwed, socket weld, Flanged or special connection
Cartridge Valve, seat and all seals are removed with
the top assembly.
This leaves only body left in line.
Maintainence time reduced significantly. Increases
safety, no danger of seals being lost down line or seat
not being fitted.
Maximum Pressure / Temperature ratings are restricted
by the valve end connections and the body / bonnet
materials.
If in doubt please ask, we will advise suitable materials
for the temperature, pressure and media.
Dimensions
Valve Size
DN
DN8/¼”
DN15/½”
DN20/¾”
DN25/1”
DN40/1½”
DN50/2”
Dim
A mm
264
264
273
308
384
451
Dim
B mm
500
500
510
543
602
702
Weight
Kg
66
66
72
78
90
110
Cv
IGPM
0.6
1.5
2.4
5
12
21
Material Specification
Body
Bonnet
Seat
Disk
Stem
Bellows
Back up Gland
Carbon Steel Valve
C.St. ASME SA105
C.St. ASME SA105
St.St. ASME SA479 316L
St.St. ASME SA479 316L
or ASME SA564 630
St.St. ASME SA479 316L
or ASME SA564 630
Hastelloy C276
Exfoliated Graphite
Stainless Steel Valve
St.St. ASME SA182 316L
St.St. ASME SA182 316L
St.St. ASME SA479 316L
St.St. ASME SA479 316L
or ASME SA564 630
St.St. ASME SA479 316L
or ASME SA564 630
Hastelloy C276
Exfoliated Graphite
13 of 34
![Page 14: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/14.jpg)
04/2012 Part of Dynamic Controls Ltd
BV-TBCMNI
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Cartridge Valve - Nuclear
Class 600 Bellows Sealed Globe Valve,
Conventional Bore, Outside Screw and Yoke,
Non-rising Handwheel, Bolted Bonnet. Designed
to ASME III
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles alao available
Buttweld end connections shown, also avail- able
as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, seat and all
seals are removed with the
top assembly.
This leaves only body left
in line.
Maintainence time reduced
significantly. Increases
safety, no danger of seals
being lost down line or seat
not being fitted.
Maximum Pressure / Temperature ratings are restricted by the
valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC.
Dimensions
Valve Size Dim A mm Dim B mm Weight Kg Cv UKGPM
DN8 (1/4”) 108 243 9 1.7
DN15 (1/2”) 108 243 9 2.45
DN20 (3/4”) 117 243 9 2.45
DN25 (1”) 127 256 9.6 5.8
DN40 (1 1/2”) 165 368 24 12.4
DN50 (2”) 203 400 25 18.5
DN80 (3”) 356 500 202 37
DN100 (4”) 406 521 240 76
DN150 (6”) 559 780 278 260
Dimensions
Body St.St. ASME SA182 F304L
Bonnet St.St. ASME SA182 F304L
Seat St.St. ASME SA479 F316L Hardfaced
Seat Seal Perlast or Kalrez Seal
Disk St.St. ASME SA479 F316L Hardfaced
Stem St.St. SA564 GR 630
Bellows Inconel 600 / 625
Back-up-Gland Graphite
14 of 34
![Page 15: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/15.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TBS9B
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve Special Class 900/1500 Bellows Sealed Globe Valve. Standard Bore,
Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. To
ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 216 261 150 12 1.0
DN15 216 261 150 12 1.6
DN20 229 261 150 12 2.9
DN25 254 294 150 14 5
DN40 305 398 200 28 14.5
DN50 368 440 250 30 23
DN65 419 500 300 180 37
DN80 381/470 560 300 200 62
DN100 457/546 590 300 290 113
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
15 of 34
![Page 16: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/16.jpg)
02/2013 Part of Dynamic Controls Ltd
BV-TBS9S
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve Special Class 900/1500 Bellows Sealed Globe Valve. Standard Bore,
Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. To
ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 216 261 150 12 1.0
DN15 216 261 150 12 1.6
DN20 229 261 150 12 2.9
DN25 254 294 150 14 5
DN40 305 398 200 28 14.5
DN50 368 440 250 30 23
DN65 419 500 300 180 37
DN80 381/470 560 300 200 62
DN100 457/546 590 300 290 113
Material Specification
Body &
Bonnet
Seat
Disk
Stem
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
St.St. Type 316 or HF
St.St. Type 316L with / without
Hard Facing
St. St. Type 316/316L
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
St.St. Type 316 or HF
St.St. Type 316L with / without
Hard Facing
St. St. Type 316/316L
Bellows St.St. Type 316L St.St. Type 316L
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
16 of 34
![Page 17: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/17.jpg)
4/2011 Part of Dynamic Controls Ltd
Service Service Temperature Pressure
ºC Bar g
-30 to +38 99
50 98
100 96
150 94
200 91
250 87
300 79
350 71
400 63
450
500
55
34
BV-TBSM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve Class 800 Bellows Sealed Globe Valve to BS5352, Conventional Bore,
Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet.
Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld,
Flanged or special connection.
Nuclear Versions to ASME III available.
Maximum Pressure / Temperature ratings
are restricted by the valve end connections
and the body / bonnet materials. Shown are
the maximum ratings for socket weld, but-
tweld and screwed ends to BS5352
Materials can be changed to customer speci-
fications.
There are temperature restrictions on some
materials, ie. C.St. ASTM A105 is not rec-
ommended for use above 425ºC.
If in doubt please ask, we will advise suit-
able materials for the temperature, pressure
and media.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 108 241 100 9 1.7
DN15 108 241 100 9 2.45
DN20 117 241 100 9 2.45
DN25 127 254 100 9.6 5.8
DN40 165 368 150 24 12.4
DN50 203 400 150 25 18.5
Material Specification
Body
Bonnet
Seat
Disk
Stem
Bellows
Back up Gland
Yoke Bush
Carbon Steel Valve
C.St. ASTM A105
C.St. ASTM A105
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
St. St. Type 316L
St. St. Type 316L
Exfoliated Graphite
Aluminium Bronze
Stainless Steel Valve
St.St. Type 316L
St.St. Type 316L
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
St. St. Type 316L St.
St. Type 316L
Exfoliated Graphite
Aluminium Bronze
17 of 34
![Page 18: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/18.jpg)
5/2011 Part of Dynamic Controls Ltd
BV-TBSM15
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve-HP Class 1500 Bellows Sealed Globe Valve to BS5352, Conventional Bore,
Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet.
Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld,
Flanged or special connection.
Nuclear Versions to ASME III available.
Maximum Pressure / Temperature ratings are restricted by the valve
end connections and the body / bonnet materials. Shown are the
maximum ratings for socket weld, buttweld and screwed ends to
BS5352
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the
temperature, pressure and media.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 216 321 150 12 1.7
DN15 216 321 150 12 2.45
DN20 229 321 150 12 2.45
DN25 254 384 150 15 5.8
DN40 305 458 200 30 12.4
DN50 368 530 290 35 18.5
Material Specification
Body
Bonnet
Seat
Disk
Stem
Bellows
Back up Gland
Yoke Bush
Carbon Steel Valve
C.St. ASTM A105
C.St. ASTM A105
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
St. St. Type 316L
St. St. Type 316L
Exfoliated Graphite
Aluminium Bronze
Stainless Steel Valve
St.St. Type 316L
St.St. Type 316L
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
St. St. Type 316L St.
St. Type 316L
Exfoliated Graphite
Aluminium Bronze
18 of 34
![Page 19: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/19.jpg)
04/2011 Part of Dynamic Controls Ltd
BV-TBSMN
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve - Nuclear Class 600 Bellows Sealed Globe Valve designed to ASME III, Conven-
tional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted
Bonnet.
Seal Welded Bonnet version available.
Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld,
Flanged or special connection
Maximum Pressure / Temperature ratings
are restricted by the valve end connections
and the body / bonnet materials.
Materials can be changed to customer speci-
fications.
There are temperature restrictions on some
materials, ie. C.St. ASME SA105 is not
recommended for use above 425ºC.
If in doubt please ask, we will advise suit-
able materials for the temperature, pressure
and media.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm lb IGPM
DN8/¼” 108 241 100 9 1.7
DN15/½” 108 241 100 9 2.45
DN20/¾” 117 241 100 9 2.45
DN25/1” 127 254 100 9.6 5.8
DN40/1½” 165 368 150 24 12.4
DN50/2” 203 400 150 25 18.5
Material Specification
Body
Bonnet
Seat
Disk
Stem
Bellows
Back up Gland
Carbon Steel Valve
C.St. ASME SA105
C.St. ASME SA105
St.St. ASME SA564 630
or Integral Stellite HF
St.St. ASME SA564 630
or Stellite HF
St. St. ASME SA479 316L
St. St. Type 316
Exfoliated Graphite
Stainless Steel Valve
St.St. ASME SA182 316L
St.St. ASME SA182 316L
St.St. ASME SA564 630
or Integral Stellite HF
St.St. ASME SA564 630
or Stellite HF
St. St. ASME SA479 316L
St. St. Type 316
Exfoliated Graphite
19 of 34
![Page 20: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/20.jpg)
Service Service
Temperature Pressure
ºC Bar g
-30 to +38 99
50 98
100 96
150 94
200 91
250 87
300 79
350 71
400 63
450 55
500 34
BV-TBSN
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Piston Type Check Valve (Non-Return)
Class 800 non-return Valve to BS5352,
Conventional Bore, Bolted Bonnet.
Available with Integral Hard Faced Seat
or Screwed in Stainless Steel Seat
Buttweld end connections shown, also
available as screwed, socket weld,
Flanged or special connection
Dimensions
Valve Size
DN DN8
DN15
DN20
DN25
DN40
DN50
Dim
A mm
108
108
117
127
165
203
Dim
B mm
170
170
190
190
220
400
Weight
Kg
3
3
3
4.5
12
15
Cv
IGPM
1.7
2.45
2.45
5.8
12.4
18.5
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials. Shown are the maximum ratings
for socket weld, buttweld and screwed ends to BS5352
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM A105 is
not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the temperature,
pressure and media.
Material Specification
Body
Bonnet
Seat
Disk
Carbon Steel Valve
C.St. ASTM A105
C.St. ASTM A105
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
Stainless Steel Valve
St.St. BS1503 304S11
St.St. BS1503 304S11
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
20 of 34
![Page 21: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/21.jpg)
07/2011 Part of Dynamic Controls Ltd
BV-TGCM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Gland Sealed Cartridge Valve Class 600 Gland Sealed Globe Valve,
Conventional Bore, Outside Screw and Yoke,
Non-rising Handwheel, Bolted Bonnet. To
BSEN15761 or Nuclear Class to ASME III
available
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles alao available
Buttweld end connections shown, also avail- able
as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, seat and all
seals are removed with the
top assembly.
This leaves only body left in
line.
Maintainence time reduced
significantly. Increases safety,
no danger of seals being lost
down line or seat not being
fitted. Maximum Pressure / Temperature ratings are restricted by the
valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC. Materials can be changed to customer specifications.
Dimensions
Valve Size Dim A mm Dim B mm Weight Kg Cv UKGPM
DN8 (1/4”) 108 243 9 1.7
DN15 (1/2”) 108 243 9 2.45
DN20 (3/4”) 117 243 9 2.45
DN25 (1”) 127 256 9.6 5.8
DN40 (1 1/2”) 165 368 24 12.4
DN50 (2”) 203 400 25 18.5
DN80 (3”) 356 500 202 37
DN100 (4”) 406 521 240 76
DN150 (6”) 559 780 278 260
Dimensions
Body St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Bonnet St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307)/ ASME SA182 F304L
Seat St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Seat Seal Perlast or Kalrez Seal
Disk St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Stem St.St. BSEN 10088-3 1.4307/ ASME SA479 F304L
Back-up-Gland Graphite
21 of 34
![Page 22: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/22.jpg)
07/2011 Part of Dynamic Controls Ltd
BV-TGSM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Gland Sealed Valve Class 800 Gland Sealed Globe Valve to BS5352, Conventional Bore,
Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet.
Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld,
Flanged or special connection.
Nuclear Versions to ASME III available.
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials. Shown are the maximum
ratings for socket weld, buttweld and screwed ends to BS5352
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the
temperature, pressure and media.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 108 241 100 9 1.7
DN15 108 241 100 9 2.45
DN20 117 241 100 9 2.45
DN25 127 254 100 9.6 5.8
DN40 165 368 150 24 12.4
DN50 203 400 150 25 18.5
Material Specification
Body
Bonnet
Seat
Disk
Stem
Back up Gland
Yoke Bush
Carbon Steel Valve
C.St. ASTM A105
C.St. ASTM A105
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
St. St. Type 316L
Exfoliated Graphite
Aluminium Bronze
Stainless Steel Valve
St.St. Type 316L
St.St. Type 316L
St.St. Type 410 or
Integral Stellite HF
St.St. Type 410 or
Stellite HF
St. St. Type 316L
Exfoliated Graphite
Aluminium Bronze
22 of 34
![Page 23: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/23.jpg)
04/2011 Part of Dynamic Controls Ltd
Service Service Temperature Pressure
ºF psi g
100 1440
200 1240
300 1120
400 1030
500 955
600 905
700 865
900 790
1100 645
1300
1500
275
85
BV-THSM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 High Temperature Bellows Sealed Valve
Class 600 Bellows Sealed Globe Valve, Conventional Bore, Outside
Screw and Yoke, Non-rising Handwheel, Bolted Bonnet.
Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld,
Flanged or special connection.
ASME III option available.
Maximum Pressure / Temperature ratings
are restricted by the valve end connections
and the body / bonnet materials. Shown are
the maximum ratings for socket weld, but-
tweld and screwed ends to BS5352
Materials can be changed to customer speci-
fications.
There are temperature restrictions on some
materials, ie. C.St. ASTM A105 is not rec-
ommended for use above 425ºC.
If in doubt please ask, we will advise suit-
able materials for the temperature, pressure
and media.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8/¼” 108 241 100 9 1.7
DN15/½” 108 241 100 9 2.45
DN20/¾” 117 241 100 9 2.45
DN25/1” 127 254 100 9.6 5.8
DN40/1½” 165 368 150 24 12.4
DN50/2” 203 400 150 25 18.5
Body
Bonnet
Seat
Disk
Stem
Bellows
Material Specification
Stainless Steel Valve
St.St. ASTM A182 F316H
St.St. ASTM A182 F316H
Integral Hard Faced
St. St. - Hard Faced
St.St. ASTM A182 F316H
Incolloy 800H or 800HT
Back up Gland
Yoke Bush
Exfoliated Graphite
Aluminium Bronze
23 of 34
![Page 24: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/24.jpg)
03/2012 Part of Dynamic Controls Ltd
BV-TMCM
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Cartridge Valve Class 600 Bellows Sealed Globe Valve, Conven-
tional Bore, Outside Screw and Yoke, Non-rising
Handwheel, Bolted Bonnet. To BSEN15761 or
Nuclear Class to ASME III available
Valve can be supplied with actuation - Electric or
Pneumatic plus controls.
Extended spindles alao available
Buttweld end connections shown, also avail- able
as screwed, socket weld, Flanged or special
connection or Manifold blocks
Cartridge Valve, seat and all
seals are removed with the
top assembly.
This leaves only body left
in line.
Maintainence time reduced
significantly. Increases
safety, no danger of seals
being lost down line or seat
not being fitted.
Maximum Pressure / Temperature ratings are restricted by the
valve end connections and the body / bonnet materials.
Valve design suitable for temperature upto 320ºC.
Dimensions
Valve Size Dim A mm Dim B mm Weight Kg Cv UKGPM
DN8 (1/4”) 108 243 9 1.7
DN15 (1/2”) 108 243 9 2.45
DN20 (3/4”) 117 243 9 2.45
DN25 (1”) 127 256 9.6 5.8
DN40 (1 1/2”) 165 368 24 12.4
DN50 (2”) 203 400 25 18.5
DN80 (3”) 356 500 202 37
DN100 (4”) 406 521 240 76
DN150 (6”) 559 780 278 260
Dimensions
Body Monel K400
Bonnet Monel K400
Seat Monel K400
Seat Seal Perlast or Kalrez Seal
Disk Monel K400
Stem Monel K400
Bellows Hastelloy C
Back-up-Gland Graphite
24 of 34
![Page 25: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/25.jpg)
04/2013 Part of Dynamic Controls Ltd
BV-TWI2S
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
High Pressure Bellows Sealed Instrument Valve
High Pressure (Class 1500 / 2500)
Bellows Sealed Instrument Valve.
Outside Screw and Yoke, Non-rising
Handwheel, Screwed and Seal Welded
Bonnet.
To ANSI B16.34 or Nuclear Class to
ASME III
Valve Size
Dim
Dimensions
Dim
Dim
Dim
DN
DN10
DN12
A mm
80
80
B mm
223
223
C mm
14
16
D mm
10
12
Valve can be supplied with Actuator - Electric or
Pneumatic.
Buttweld end connections, also available as buttweld
with weld pups, screwed, socket weld, Flanged or
special connection
Available with Integral Hard Faced (Stellite 6 or
Colomonoy 5) Seat or Screwed in Stainless Steel
Seat
Body
Bonnet
Seat
Disk
Stem
Material Specification
Carbon Steel Valve
St.St. ASME SA182 F321
St.St. ASME SA182 F321
Integral (Hard Facing)
St.St. Type 321 with / without
Hard Facing
St. St. ASME SA479 316Ti
Bellows St.St. Type 321
Gland Exfoliated Graphite Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
25 of 34
![Page 26: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/26.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS2A
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Actuated Bellows Sealed Valve Special Class 2500 Bellows Sealed Globe Valve. Standard Bore, Outside
Screw and Yoke, Piston Actuated, Seal Welded Bonnet. To ANSI B16.34
or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with ElextricActuator or Manual Operation.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve
end connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tem-
perature, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Pressure / Temperature as ANSI
B16.34 Special Class. Maximum
Pressure Restricted to 322 Bar g
Valve Size
Dim
Dimensions
Dim
Dim
Weight
Actuator
sized for
Cv design /
DN
DN8
DN15
DN20
DN25
DN40
DN50
DN65
DN80
DN100
A mm
264
264
273
308
384
451
508
578
673
B mm
320
320
320
380
550
640
750
880
950
C mm
Sized
for
Press. /
Temp.
Req
Kg As
deter-
mined
by
actua-
tor
size.
IGPM
1.0
1.6
2.9
5
14.5
23
37
62
113
operating
conditions
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
26 of 34
![Page 27: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/27.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS2B
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve Special Class 2500 Bellows Sealed Globe Valve. Standard Bore, Outside
Screw and Yoke, Non-rising Handwheel, Seal Welded Bonnet. To ANSI
B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve
end connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tem-
perature, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Pressure / Temperature as ANSI
B16.34 Special Class. Maximum
Pressure Restricted to 322 Bar g
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 264 320 200 16 1.0
DN15 264 320 200 16 1.6
DN20 273 320 200 16 2.9
DN25 308 380 200 20 5
DN40 384 550 250 33 14.5
DN50 451 640 300 39 23
DN65 508 750 350 220 37
DN80 578 880 400 260 62
DN100 673 950 400 350 113
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
27 of 34
![Page 28: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/28.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS6A
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Actuated Bellows Sealed Valve Special Class 150/300/600 Bellows Sealed Globe Valve. Standard Bore,
Outside Screw and Yoke, Piston Actuated, Seal Welded Bonnet. To ANSI
B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Electric Actuators or Manual Operation.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Actuator sized for design / operating
conditions
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 165 243 Sized As 1.0
DN15 165 243 for deter- 1.8
DN20 190 243 Press. / mined 4.0
DN25 216 256 Temp. by 6.9
DN40 241 368 Req actua- 17.4
DN50 292 400 tor 31
DN65 330 450 size. 46
DN80 356 500 70
DN100 432 521 128
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
28 of 34
![Page 29: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/29.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS6B
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve Special Class 150/300/600 Bellows Sealed Globe Valve. Standard Bore,
Outside Screw and Yoke, Non-rising Handwheel, Seal Welded Bonnet.
To ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 165 243 100 16 1.0
DN15 165 243 100 16 1.8
DN20 190 243 100 16 4.0
DN25 216 256 125 20 6.9
DN40 241 368 150 33 17.4
DN50 292 400 200 39 31
DN65 330 450 300 220 46
DN80 356 500 300 260 70
DN100 432 521 300 350 128
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
29 of 34
![Page 30: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/30.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS6D
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Actuated Bellows Sealed Valve Special Class 150/300/600 Bellows Sealed Globe Valve. Standard Bore,
Outside Screw and Yoke, Diaphragm Actuated, Seal Welded Bonnet. To
ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Electric Actuators or Manual Operation.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Actuator sized for design / operating
conditions
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 165 243 Sized As 1.0
DN15 165 243 for deter- 1.8
DN20 190 243 Press. / mined 4.0
DN25 216 256 Temp. by 6.9
DN40 241 368 Req actua- 17.4
DN50 292 400 tor 31
DN65 330 450 size. 46
DN80 356 500 70
DN100 432 521 128
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
30 of 34
![Page 31: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/31.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS6E
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Actuated Bellows Sealed Valve Special Class 150/300/600 Bellows Sealed Globe Valve. Standard Bore, Outside Screw and Yoke, Electrically
Actuated, Seal Welded Bonnet. To ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or
Colomonoy 5) Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Pneumatic Actuator or Manual
Operation.
Buttweld end connections shown, also available as
screwed, socket weld, Flanged or special connection
Valve Size
Dim
Dimensions
Dim
Dim
Weight
Maximum Pressure / Temperature ratings are restricted by
the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie.
C.St. ASTM A105 is not recommended for use above
425ºC.
If in doubt please ask, we will advise suitable materials for
the temperature, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet.
Forged available.
Cv
DN
DN8
DN15
DN20
DN25
DN40
DN50
DN65
DN80
DN100
A mm
165
165
190
216
241
292
330
356
432
B mm
243
243
243
256
368
400
450
500
521
C mm
Sized
for
Press. /
Temp.
Req.
Kg As
deter-
mined
by
actua-
tor
size.
IGPM
1.0
1.8
4.0
6.9
17.4
31
46
70
128
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing St.St. Type 316L with
Colomonoy Hard Facing
Actuator sized for design /
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075 operating conditions
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
31 of 34
![Page 32: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/32.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS9A
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Actuated Bellows Sealed Valve Special Class 900/1500 Bellows Sealed Globe Valve. Standard Bore,
Outside Screw and Yoke, Piston Actuated, Seal Welded Bonnet. To ANSI
B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Electric Actuator or Manual Operation.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Actuator sized for design / operating
conditions
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 216 261 Sized As 1.0
DN15 216 261 for deter- 1.6
DN20 229 261 Press. / mined 2.9
DN25 254 294 Temp. by 5
DN40 305 398 Req. actua- 14.5
DN50 368 440 tor 23
DN65 419 500 size. 37
DN80 381/470 560 62
DN100 457/546 590 113
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
32 of 34
![Page 33: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/33.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS9B
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Bellows Sealed Valve Special
Class 900/1500 Bellows Sealed Globe Valve. Standard Bore, Outside
Screw and Yoke, Non-rising Handwheel, Seal Welded Bonnet. To ANSI
B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or
Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket
weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end
connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie. C.St. ASTM
A105 is not recommended for use above 425ºC.
If in doubt please ask, we will advise suitable materials for the tempera-
ture, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Dimensions
Valve Size
Dim
Dim
Dim
Weight
Cv DN A mm B mm C mm Kg IGPM
DN8 216 261 150 12 1.0
DN15 216 261 150 12 1.6
DN20 229 261 150 12 2.9
DN25 254 294 150 14 5
DN40 305 398 200 28 14.5
DN50 368 440 250 30 23
DN65 419 500 300 180 37
DN80 381/470 560 300 200 62
DN100 457/546 590 300 290 113
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing
St.St. Type 316L with
Colomonoy Hard Facing
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
33 of 34
![Page 34: BVMI Process Engineering - Cunico Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall,Wolverhampton, ... Colmonoy 5 or Stellite HF St. St. Type](https://reader033.fdocuments.us/reader033/viewer/2022051602/5b0084057f8b9a256b902272/html5/thumbnails/34.jpg)
12/2011 Part of Dynamic Controls Ltd
BV-TWS9E
BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road,
Ettingshall, Wolverhampton, WV4 6JX, UK
Tel: +44 (0)1902 404736
Fax: +44 (0)1902 403906
email: [email protected]
web site: http://www.bvmi.co.uk
Series 34 Actuated Bellows Sealed Valve Special Class 900/1500 Bellows Sealed Globe Valve. Standard Bore, Outside Screw and Yoke, Electrically
Actuated, Seal Welded Bonnet. To ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or
Colomonoy 5) Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Pneumatic Actuator or Manual
Operation.
Buttweld end connections shown, also available as
screwed, socket weld, Flanged or special connection
Valve Size
Dim
Dimensions
Dim
Dim
Weight
Maximum Pressure / Temperature ratings are restricted by
the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications.
There are temperature restrictions on some materials, ie.
C.St. ASTM A105 is not recommended for use above
425ºC.
If in doubt please ask, we will advise suitable materials for
the temperature, pressure and media.
DN65/DN80/DN100 normally cast body and bonnet.
Forged available.
Cv
DN
DN8
DN15
DN20
DN25
DN40
DN50
DN65
DN80
DN100
A mm
216
216
229
254
305
368
419
381/470
457/546
B mm
261
261
261
294
398
440
500
560
590
C mm
Sized
for
Press. /
Temp.
Req.
Kg As
deter-
mined
by
actua-
tor
size.
IGPM
1.0
1.6
2.9
5
14.5
23
37
62
113
Material Specification
Body &
Bonnet
Carbon Steel Valve
C.St. ASME SA350 LF2 or
C.St. ASME SA352 LCB
Stainless Steel Valve
St.St. ASME SA182 F316L or
St.St. ASME SA351 CF3M
Seat Colomonoy Integral Hard Facing Colomonoy Integral Hard Facing
Disk St.St. Type 316L with
Colomonoy Hard Facing St.St. Type 316L with
Colomonoy Hard Facing
Actuator sized for design /
Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075 operating conditions
Bellows Inconel 600/625 Inconel 600/625
Gland
Bush
Exfoliated Graphite
Aluminium Bronze
Exfoliated Graphite
Aluminium Bronze
Dimensions are subject to confirmation.
Drawings with confirmed dimensions can
be supplied at time of order.
34 of 34