BuzziJet Standing 110 - 120V

Product Specification Sheet

This document contains technical information about the BuzziJet Standing

www.buzzi.space

2 | BuzziSpace | BuzziJet Standing 110 - 120V

Perfect CurveBuzziJet Standing is a simple and stylish add-on to any lounge area or break-out zone. Designed with flexible and open spaces in mind, this sound-absorbing floor lamp brings personality to the space while offering a cosy and calm atmosphere. Its wide upholstered body and aerodynamic design, supported by an elegant curvy frame, will let you experience the importance of good acoustics. Moreover, create a warm and relaxed space through its dimming feature.

Designed by BuzziSpace Studio

General

Standing

Upholstered acoustic foam shadeLED disk with opaque diffusorAluminium arch in black (RAL 9005)Metal baseplate in black (RAL 9005)Fabric power cord in black or red

Wattage: 21WInput Voltage: 110-120VInput Frequency: 50/60HzLumen Output: 1900 lumenColor Temperature: 3000KColor Rendering Index: >95Dimming: Floordimmer Unified Glare Rating: 22

IP20 Dry Usage

Assembled

Acoustics

Absorption Diffusion Low tone Mid tone High tone

CertificationsUL Listed from summer 2020

Content

Configurations 3 Dimensions 8

Technical components 4 Acoustics 9

Fabrics 5

3 | BuzziSpace | BuzziJet Standing 110 - 120V

Configurations

BuzziJet Standing

Upholstered acoustic foam shadeLED disk with opaque diffusorAluminium arch in black (RAL 9005)Metal baseplate in black (RAL 9005)Fabric power cord in black or red

Height: 83.07”Diameter: Ø 25.59” - 31.50”Total: Width 73.62” Heigth 83.07”Base: Ø 25.59” Heigth 0.79”Acoustic Shade: Ø 31.50” Heigth 11.81”

Baseplate: 99.21 lbsArch & Shade: 50.71 lbs

4 | BuzziSpace | BuzziJet Standing 110 - 120V

Technical Components

Light sourceThe Light source is wrapped with an upholstered ring in the same fabric as the foam shade.The PMMA diffusor ensures an optimal light spread and efficiency. It creates a very diffuse light surface without any dottiness. The light source of the BuzziJet Standing is a LED PCB, containing 36 low power LED’s.

350 Lux

All in detailsAs final touch the fabric cable is intentionally pushed into the curved shape frame, hiding all the screws and connections.Select a red fabric power cable to create a detail that stands out or chosse a black one to create an elegant layout.

Dimming

DIMMER 1012S ML LFP SW1 100-240V BL Cod. 039139

ITA Documentazione online (certificazioni, istruzioni, ecc.) - LINK PAGINA PRODOTTO -

ENG Online documents (certifications, instructions, etc.) - WEBPAGE LINK -

ARDITI S.p.a. 24012 Val Brembilla (Bergamo) Italy - Via Caberardi, 3 - Tel. +39 0345 52111 - Fax. +39 0345 52355 - www.arditi.com - arditi@arditi.com Ultimo aggiornamento: 24 giugno 2019 . – Last upda te: 24 June 2019 . 1 / 2

Dimmer da tavolo o pavimento, dotato di interruttore a pulsante, specifico per moduli led dimmerabili a tensione di rete. Questo modello è integrato di protezione supplementare per il fine vita lampada Table/floor dimmer with additional built in push button switch, specific for dimmable mains voltage led modules.This model has an integrated protection for end of life lamps Prodotto in esaurimento / till stock ends

- Protezione fine vita lampada (LFP) integrata - Per cavi piatti e tondi - Memoria dell'ultimo stato di dimmerazione - Provvisto di morsetto di terra - Accensione omogenea dei led a bassi livelli di dimmerazione

- Integrated load failure protection (LFP) - For flat and round cables - Memory on last dimming level - Equipped with earth terminal - Homogeneous led switching on at low dimming level

Max 4 moduli led collegabili Max 4 led modules Sostituito dal nuovo codice – Replaced by new code 040406

You can choose from a more energized or intimate atmosphere by dimming the light and relax.

38.58”

5 | BuzziSpace | BuzziJet Standing 110 - 120V

Fabrics

FabricCategory AComposition 70% Recycled Wool, 25% Recycled Polyacryl, 5% Recycled Other FabricsWeight 405 g/m2 | 11.94 oz/yd2 Abrasion resistance 40.000 Martindale, 50,000 Wyzenbeek Flammability EU: EN 1021.1/2006 | BS EN 1021.1/2006 (cigarette).

EN 1021.2/2006 | BS EN 1021.2/2006 (match) USA: CAL TB 117 | ASTM E84 CLASS A Fastness to light EU: 4 | USA 4 Fastness to rubbing EU: Wet 3-4 | Dry 4-5 Fastness to crocking USA: Wet 5 | Dry 5

Trevira CS+| CSCategory AWeight 420 g/m2 | 12.39 oz/yd2

Composition 100% Polyester, Trevira CS Abrasion resistance 100.000 Martindale, 90,000 Wyzenbeek Flammability BS 5852 part II: CRIB 5 | BS 7176 Medium Hazard USA: CAL TB 117 | M1 | B1 | EN 1021/1-2 |C1 | IMO Res. A652 (16) Fastness to light EU: 6 | USA 5 Fastness to rubbing EU: Wet 4-5 | Dry 4-5 Fastness to crocking USA: Wet 5 | Dry 5

Revive 1 Category AComposition 100% recycled polyester FR Weight 430 g/lin.m

Abrasion resistance 60.000 Martindale rubs, EN ISO 12947 Flammability EN 1021-1/2 | DIN 4102 B1 | Önorm B1/Q1 UNI 9175 1IM | US Cal. Tech. Bull. 117 IMO A.652 (16) Fastness to light Note 5-7, ISO 105-B02 Fastness to rubbing (ISO) dry 5, wet 4-5 Pilling Note 4-5, EN ISO 12945

6 | BuzziSpace | BuzziJet Standing 110 - 120V

Clara 2 Category B Composition 92% new wool, 8% nylonWeight 400 g/lin.m Abrasion resistance 80.000 Martindale rubs, EN ISO 12947 Flammability EN 1021-1/2 | BS 5852, ignition source 2–3 | DIN 4102 B2 NF D 60 013 | UNI 9175 1IM | US Cal. Tech. Bull. 117, Sec. E NFPA 260 | IMO A.652(16) Fastness to light Note 5-7, ISO 105-B02 Fastness to rubbing (ISO) dry 4-5, wet 4 Pilling Note 4, EN ISO 12945

Remix 3 Category BComposition 90% new wool, 10% nylon Weight 415 g/lin.m Abrasion resistance 100.000 Martindale rubs, EN ISO 12947 Flammability EN 1021-1/2 | BS 5852 part 1 Önorm B1/Q1 | NF D 60 013 | UNI 9175, 1IM AS/NZS 1530.3 | Cal. Tech. Bull. 117-2013 NFPA 260 | IMO FTP Code 2010:Part 8 Fastness to light Note 5-7, ISO 105-B02 Fastness to rubbing (ISO) dry 4-5, wet 4 Pilling Note 4, EN ISO 12945

Hero Category CComposition 96% new wool, 4% nylonWeight 580 g/lin.m Abrasion resistance 45.000 Martindale rubs, EN ISO 12947 Flammability EN 1021-1/2 | DIN 4102 B2 | NF D 60 013 UNI 9175 1IM | US Cal. Bull. 117-2013 | NFPA 260 IMO A.652 (16) Fastness to light Note 5-6, ISO 105-B02 Fastness to rubbing (ISO) dry 4-5, wet 4-5 Pilling Note 3-4, EN ISO 12945

7 | BuzziSpace | BuzziJet Standing 110 - 120V

Tonus 4 Category DComposition 90% new wool, 10% HelancaWeight 665 g/lin.m Abrasion resistance 100.000 Martindale rubs, EN ISO 12947 Flammability EN 1021-1/2 | BS 5852 part 1 | DIN 4102 B2 Önorm B1/Q1 | NF D 60 013 | UNI 9175 1IM US Cal. Bull. 117-2013 | NFPA 260 | IMO A.652 (16) Fastness to light Note 5-7, ISO 105-B02 Fastness to rubbing (ISO) dry 3-5, wet 3-5 Pilling Note 3, EN ISO 12945

Memory 2 Category EComposition 100% Trevira CS Weight 700 g/lin.m Abrasion resistance 35.000 rubs acc. to the Martindale method, EN ISO 12947 Flammability EN 1021-1/2 | DIN 4102 B1 | Önorm B1/Q1 NF D 60 013 | NF P 92 507 M1 | UNI 9175 1IM UNI 9177 classe 1 | US Cal. Tech. Bull. 117 IMO A.652 (16) Fastness to light Note 5-8, ISO 105-B02 Fastness to rubbing (ISO) dry 4-5, wet 4-5 Pilling Note 4, EN ISO 12945

8 | BuzziSpace | BuzziJet Standing 110 - 120V

Dimensions

BuzziJet Standing

83.0

7”

11.8

1”

0.79

”

68.1

1”

Ø 31.50”

73.62”

Ø 25.59”

± 19.69”± 78.74”

9 | BuzziSpace | BuzziJet Standing 110 - 120V Last update: 11/01/2021

Acoustics

BuzziJet StandingEquivalent sound absorption area in m² per object

0,00

0,20

0,40

0,60

0,80

1,00

1,20

1,40

125Hz 250Hz 500Hz 1000Hz 2000Hz 4000Hz

Hz Aeq/m²

125 0.34

250 0.60

500 1.00

1000 1.14

2000 1.21

4000 1.07