Buyers Guide

1

Buyer’s GuideContents

The Buyer's Guides, which are listed as sets in the followingpages, indicate the type of apparatus necessary to obtainmeaningful results from a particular test method.They are only guides to the engineer and may require more orless apparatus depending upon the laboratory testingrequirements.

These guides can however, be used as the basis upon which amodern, comprehensive materials testing laboratory can beestablished. ELE's considerable experience and fully qualified staffare always available to advise on comprehensive laboratorypackages.

The Buyer's guide list is a selection of the most frequently usedtesting standards. Please note that when using these guides theremay be duplication of certain products.

2 Soil Testing Sets

10 Concrete Testing Sets

12 Cement Testing Sets

14 Aggregate Testing Sets

17 Asphalt Testing Sets

19 Specialist Testing Sets

25 Index of British Standard Test Sets

29 Index of ASTM Test Sets

31 Index of AASHTO Test Sets

32 Index of AFNOR, DIN and EN Test Sets

Buyer’s GuideSoil Testing: Sets 23010 to 24025

2

Set 23010 Hand Boring and Sampling Kit23-1543 2 Stillson Wrench, size 14.23-1547 1 Handle and T Piece, for use with EL23-1541.23-1549 1 Chisel for use with EL23-154123-1587 1 Jarring Link, for driving sample tubes.23-1617 1 Spiral Auger, 40 mm diameter. One piece model23-1501 1 100 mm dia Soil Auger Head23-1504 2 150 mm dia Soil Auger Head23-1525 2 50 mm dia Dutch Soil Auger Head.23-1517 1 150 mm dia Gravel Auger Head.23-1541 10 Extension Rod, 27 mm diameter, 1m long23-1577 5 38 mm diameter Sample Tube 230 mm long23-1579 1 Adaptor for EL23-1577 to fit extension rods.

Set 23015/1 Preparation of Disturbed Samples of Soil,BS 1377

78-0110/01 1 Soils Drying Oven 225 litre capacity78-1245 1 Dial Thermometer 0 to 300°C78-5457/01 1 Electronic top loading balance 6000 x 0.1g78-5525/01 1 Electronic top pan balance 30000 x 1g78-5650/01 1 Electronic platform scale 60 kg x 10g23-3000 1 Riffle Box, 7 mm slot width23-3070 1 Riffle Box, 15 mm slot width23-3170 1 Riffle Box, 30 mm slot width23-3300 1 Riffle Box, 50 mm slot width23-3450 1 Mortar, Porcelain23-3500 1 Rubber Headed Pestle79-0010 1 200 mm dia Lid79-0020 1 200 mm dia Receiver79-0180 1 200 mm dia BS Sieve 425 µm stainless steel mesh79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh79-1515 1 200 mm dia BS Sieve 5.00 mm perforated plate79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0140 1 Spatula 200 mm blade81-0222 1 Scoop, Stainless Steel. 250 mm long by 125 mm dia.81-0710 1 Trimming Knife81-4030 4 Oven Tray 406 mm sq, 50 mm deep81-4230 1 Sample Tray.81-4765 50 Polythene Bag 254 mm x 380 mm.

Set 23025/1 Preparation of Undisturbed Samples of Soilfor testing, BS 1377

23-3710/01 1 Melting Pot 2.3 litre capacity23-4090 1 38 mm Hand Operated Hydraulic Sample Extruder23-4120 1 38 mm Split Former23-4140 1 Cutting Tool23-5800 1 Hand Operated Soil Lathe34-0140 1 Steel Rule 300 mm.81-0140 1 Spatula 200 mm blade81-0586 1 Vernier Callipers81-0708 1 Wire Saw81-0710 1 Trimming Knife24-9010 1 Straight Edge, 300 mm82-7031 1 Paraffin Wax in 5 kg block

Set 23035 Dry preparation of soil samples for grainsize analysis and determination of soilconstants, ASTM D421, AASHTO T87,T146

23-3150 1 Riffle Box, 25 mm slot width23-3450 1 Mortar, Porcelain.23-3500 1 Rubber Headed Pestle.81-4700 4 Stainless Steel Tray 305 mm dia.Also required, but not part of the basic set:Set 23035/AR Also required products set

1 78-7090 Harvard Trip Balance 2000 g capacity x 0.1g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 79-5020 8 inch dia ASTM Sieve 4.75 mm mesh.1 79-5070 8 inch dia ASTM Sieve 2.0 mm mesh1 79-5160 8 inch dia ASTM Sieve 425 µm mesh1 79-5400 8 inch dia Lid.1 79-5410 8 inch dia Receiver.1 79-7210 Sieve Brush double-ended Nylon.1 80-0300/01 Sieve Shaker EFL2000/1

Set 23040 Hand Operated Hydraulic Sample Extruderfor 38 mm samples

23-4090 1 38 mm Hand Operated Hydraulic Sample Extruder81-0710 1 Trimming Knife81-0708 1 Wire Saw23-4120 1 38 mm Split Former

Set 23045 Riffle Boxes (Sample Dividers) Set23-3000 1 Riffle Box, 7 mm slot width.23-3050 1 Riffle Box, 13 mm slot width23-3070 1 Riffle Box, 15 mm slot width23-3100 1 Riffle Box, 19 mm slot width23-3150 1 Riffle Box, 25 mm slot width23-3170 1 Riffle Box, 30 mm slot width23-3200 1 Riffle Box, 38 mm slot width23-3300 1 Riffle Box, 50 mm slot width23-3350 1 Riffle Box, 64 mm slot width

Set 23055/1 Moisture content determination, ovenmethod, BS 1377, ASTM D2216

78-0110/01 1 Soils Drying Oven 225 litre capacity78-1245 1 Dial Thermometer 0 to 300°C78-5447/01 1 Electronic top loading balance 2100 x 0.01 g78-5525/01 1 Electronic top pan balance 30000 x 1 g81-0220 1 Aluminium Scoop, large81-2979 10 Unnumbered Moisture Content Tin 90 g capacity81-3000 10 Sample Container. 0.5 litre capacity81-4020 10 Sample Tray 306 x 306 x 38 mm

Set 23065/1 Moisture content determination, sand bathmethod, BS 1377

78-3101/01 1 Hotplate81-0100 1 Spatula, 100 mm Blade81-0220 1 Aluminium Scoop, large81-2979 10 Unnumbered Moisture Content Tin 90 g capacity81-4700 4 Stainless Steel Tray 305 mm dia.78-5457/01 1 Electronic top loading balance 6000 x 0.1g

Set 23075/1 Saturation moisture content of chalk,BS 1377

34-8100/01 1 Buoyancy Balance, 15 kg x 0.5g34-8105 1 Cradle23-3710/01 1 Melting Pot 2.3 litre capacity 40 – 95°C range81-0701 1 Wax Ladle81-0703 1 Wax Brush82-7031 1 Paraffin Wax in 5 kg blockAlso required, but not part of the basic set:Set 23055/1

Set 24015 Determination of liquid limit, Casagrandemethod, BS 1377

24-0409 1 Liquid Limit Device24-0425 1 Grooving Tool and Gauge BS24-0471 1 Revolution Counter Kit81-0140 2 Spatula 200 mm blade81-3000 10 Sample Container. 0.5 L capacity82-2500 1 Wash Bottle Polythene 500 ml24-0430 1 Glass Plate.Also required, but not part of the basic set:Set 23055/1

Set 24025 Determination of liquid limit, ASTM D4318,AASHTO T89

24-0437 1 Liquid Limit Device, hand operated, ASTM24-0461 1 Casagrande Grooving Tool,AASHTO81-0100 2 Spatula, 100 mm Blade81-2979 10 Unnumbered Moisture Content Tin 90 g capacity82-0380 1 Measuring Cylinder 100 ml82-2000 1 Evaporating Dish 150 mm dia x 45 mm depthAlso required, but not part of the basic set:Set 24025/AR Also required product set

1 78-5335/01 Analytical electronic balance 210 x 0.1mgSet 23055/1

Soil Testing Sets


3

Set 24035 Determination of liquid limit, conepenetrometer method, BS 1377

24-0540 1 Cone Penetrometer24-0546 1 Test Gauge for checking condition of cone24-0548 1 Penetration Test Cup38-7120 1 Straight Edge81-0140 2 Spatula 200 mm blade81-0518 1 Timer Clock81-3000 10 Sample Container. 0.5 litre capacity.82-2000 1 Evaporating Dish 150 mm dia x 45 mm depth82-2500 1 Wash Bottle Polythene 500 ml24-0430 1 Glass Plate.Also required, but not part of the basic set:Set 23055/1

Set 24045 Determination of plastic limit and plasticityindex, BS 1377, ASTM D4318, AASHTOT90

24-0811 1 Rod Comparator81-0140 2 Spatula 200 mm blade24-0430 2 Glass PlateAlso required, but not part of the basic set:Set 23055/1

Set 24055 Determination of shrinkage, volumetricmethod, BS 1377

24-1010 1 Shrinkage Limit Apparatus81-0500 1 Heavy Duty Rubber Gloves81-4700 1 Stainless Steel Tray 305 mm dia.82-0260 1 Beaker Cover 100 mm dia.79-7210 1 Sieve Brush double-ended NylonAlso required, but not part of the basic set:Set 23055/1

Set 24065 Determination of shrinkage, limit,volumetric method, BS 1377, ASTM D427,AASHTO T92

24-1500 1 Prong Plate24-1550 1 Shrinkage Dish24-1600 1 Glass Cup38-7060 1 Glass Plate 100 mm sq.38-7120 1 Straight Edge81-0100 2 Spatula, 100 mm Blade81-4700 1 Stainless Steel Tray 305 mm dia.82-2000 2 Evaporating Dish 150 mm dia x 45 mm depth79-7210 1 Sieve Brush double-ended Nylon82-0380 1 Measuring Cylinder 100 mlAlso required, but not part of the basic set:Set 23055/1

Set 24075 Determination of linear shrinkage, BS 137724-1800 2 Shrinkage Mould to BS 137781-0100 2 Spatula, 100 mm blade81-0586 1 Vernier Callipers24-0430 1 Glass Plate25-8090 1 Silicon Grease LubricantAlso required, but not part of the basic set:Set 24075/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C

Set 24085/1 Determination of density, immersion inwater, BS 1377

34-8100/01 1 Buoyancy Balance, 15 kg x 0.5 g34-8105 1 Cradle81-0701 1 Wax Ladle81-0703 1 Wax Brush82-7031 4 Paraffin Wax in 5 kg block, MP 50-54°CAlso required, but not part of the basic set:Set 23055/1

Set 24105/1 Determination of particle density of fine tomedium and coarse-grained soils, gas jarmethod, BS 1377

24-2830 2 Gas Jar 75 mm dia x 300 mm24-2850/01 1 Mechanical End-Over-End Shaker82-5010 1 Thermometer –10 to +50 x 0.5°CAlso required, but not part of the basic set:Set 24105/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-7090 Harvard Trip Balance 2000g capacity x 0.1g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop

Set 24115/1 Determination of particle density of finesoils, small pyknometer method, BS 1377,ASTM D854, AASHTO T100

24-2900 2 50 ml Density Bottle81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall82-1000 1 Volumetric Flask 100 ml capacity with stopper82-2100 1 Non-Vacuum Desiccator 200 mm internal dia.82-2170 1 Vacuum Desiccator 250 mm internal diameter82-2180 1 Safety Cage for Desiccator82-2500 1 Wash Bottle Polythene 500 ml82-4005 1 Glass Rods 7 mm dia x 200 mm (pack of 10)82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g82-7700 1 Filter Pump82-8500/01 1 14 litre Water Bath with Digital ControllerAlso required, but not part of the basic set:Set 24115/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5405/01 Electronic top loading balance1 23-3000 Riffle Box, 7 mm slot width

Set 24125 Determination of particle density of non-cohesive soils up to 20 mm particle size,large pyknometer method, BS 1377

24-2885 2 Pyknometer82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10)82-5010 1 Thermometer –10 to +50 x 0.5°CAlso required, but not part of the basic set:Set 24125/AR Also required products set

1 78-1215/01 Drying Oven 50 Litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-7000 Dial-O-Gram Balance, 310g capacity x 10mg.

Set 24145 Particle size distribution, wet and drymethod, BS 1377

79-0010 1 200 mm dia Lid79-0020 1 200 mm dia Receiver79-0070 1 200 mm dia BS Sieve 63 µm stainless steel mesh79-0120 1 200 mm dia BS Sieve 150 µm stainless steel mesh79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh79-0160 1 200 mm dia BS Sieve 300 µm stainless steel mesh79-0180 1 200 mm dia BS Sieve 425 µm stainless steel mesh79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh79-0240 1 200 mm dia BS Sieve 1.18 mm stainless steel mesh79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh79-0280 1 200 mm dia BS Sieve 2.36 mm stainless steel mesh79-2010 1 300 mm dia Lid79-2020 1 300 mm dia Receiver79-2300 1 300 mm dia BS Sieve 3.35 mm stainless steel mesh79-2515 1 300 mm dia BS Sieve 5.00 mm perforated plate79-2525 1 300 mm dia BS Sieve 6.30 mm perforated plate79-2555 1 300 mm dia BS Sieve 10.0 mm perforated plate79-2575 1 300 mm dia BS Sieve 14.0 mm perforated plate79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate79-2615 1 300 mm dia BS Sieve 28.0 mm perforated plate79-2640 1 300 mm dia BS Sieve 37.5 mm perforated plate79-2655 1 300 mm dia BS Sieve 50.0 mm perforated plate79-2670 1 300 mm dia BS Sieve 63.0 mm perforated plate79-2680 1 300 mm dia BS Sieve 75.0 mm perforated plate79-7200 1 Sieve Brush, Double Ended, Brass and Nylon Bristle79-7210 1 Sieve Brush double-ended Nylon81-0380 2 Rubber Tubing 8 mm Bore x 12 mm OD81-4080 2 Sample Tray 610 x 610 x 63 mm

Continued

Buyer’s GuideSoil Testing: Sets 24155/1 to 24205/1

4

Set 24145 continued81-4700 6 Stainless Steel Tray 305 mm dia82-2000 6 Evaporating Dish 150 mm dia x 45 mm depth24-4145 1 Sodium Hexametaphosphate 500 gAlso required, but not part of the basic set:Set 24145/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5456/01 Electronic top loading balance1 23-3000 Riffle Box, 7 mm slot width1 23-3070 Riffle Box, 15 mm slot width1 23-3170 Riffle Box, 30 mm slot width1 23-3300 Riffle Box, 50 mm slot width1 80-0350/01 Sieve Shaker EFL2000/2

Set 24155/1 Particle size distribution, sedimentation byhydrometer method, BS 1377

78-2950/01 1 200 mm dia Hotplate24-2850/01 1 Mechanical End-Over-End Shaker24-4700 2 1000 ml Glass Cylinder with Rubber Bung34-0140 1 Steel Rule 300 mm81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall81-0518 1 Timer Clock82-0276 1 500 ml Conical Beaker with glass cover82-0380 1 Measuring Cylinder 100 ml82-1300 1 Bulb Pipette 50 ml capacity82-2000 5 Evaporating Dish 150 mm dia x 45 mm depth82-2100 1 Non-Vacuum Desiccator 200 mm internal dia.82-2200 1 Buchner Funnel No. 582-2340 1 Filter Flask 1000 ml82-2500 1 Wash Bottle Polythene 500 ml24-4620 1 Long Stem Soil Hydrometer82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10)82-5010 1 Thermometer -10 to +50 x 0.5°C82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g82-7700 1 Filter Pump82-7931 1 Filter Paper, equivalent to Whatman No 5024-4865/01 1 Constant Temperature Bath 0 to 99.9°C x 0.1°CAlso required, but not part of the basic set:Set 24155/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5447/01 Electronic top loading balance1 79-0020 200 mm dia Receiver1 79-0070 200 mm dia BS Sieve 63 µm mesh1 79-0140200 mm dia BS Sieve 212 µm mesh1 79-0200 200 mm dia BS Sieve 600 µm mesh1 79-0270 200 mm dia BS Sieve 2.00 mm mesh

The following chemicals are required:Hydrogen Sodium Hexametaphosphate Recommend local purchase

Set 24165/1 Grain size analysis of soil, ASTM D422,AASHTO T88.

24-4130/01 1 High Speed Stirrer24-4700 2 1000 ml Glass Cylinder with Rubber Bung79-5020 1 8 in. dia ASTM Sieve 4.75 mm stainless steel mesh79-5070 1 8 in. dia ASTM Sieve 2.0 mm stainless steel mesh79-5120 1 8 in. dia ASTM Sieve 850 µm stainless steel mesh79-5160 1 8 in. dia ASTM Sieve 425 µm stainless steel mesh79-5190 1 8 in. dia ASTM Sieve 250 µm stainless steel mesh79-5240 1 8 in. dia ASTM Sieve 106 µm stainless steel mesh79-5260 1 8 in. dia ASTM Sieve 75 µm stainless steel mesh79-5400 1 8 inch dia Lid79-5410 1 8 in. dia Receiver79-5510 1 8 in. dia ASTM Sieve 9.50 mm stainless steel mesh79-5560 1 8 in. dia ASTM Sieve 19.0 mm stainless steel mesh79-5610 1 8 in. dia ASTM Sieve 37.5 mm stainless steel mesh79-5630 1 8 in. dia ASTM Sieve 50.0 mm stainless steel mesh79-5660 1 8 in. dia ASTM Sieve 75.0 mm stainless steel mesh79-7210 1 Sieve Brush double-ended nylon82-0540 1 Measuring Cylinder 2000 x 20 ml with spout82-2010 1 Evaporating Dish 200 mm dia x 55 mm depth24-4640 1 ASTM/AASHTO Soil Hydrometer24-4145 1 Sodium Hexametaphosphate 500 g24-4865/01 1 Constant Temperature Bath 0 to 99.9°C82-0200 1 Glass Beaker 600 ml squat form with spout.Also required, but not part of the basic set:Set 24165/1/AR Also required products set

1 78-5335/01 Analytical electronic balance 210 x 0.1mg1 80-0300/01 Sieve Shaker EFL2000/1

Set 24175/1 Particle size distribution, sedimentation byPipette method, BS 1377

24-2850/01 1 Mechanical End-Over-End Shaker24-4851 1 Andreasen Pipette Stand24-4853 1 Andreasen Pipette, 10 ml24-4855 2 Measuring Cylinder 500 ml with Rubber Bung81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall81-0518 1 Timer Clock82-0276 1 500 ml Conical Beaker with glass cover82-0280 1 1000 ml Tall form Beaker with spout82-0380 1 Measuring Cylinder 100 ml82-1300 1 Bulb Pipette 50 ml capacity82-1540 15 Weighing Bottle82-2000 1 Evaporating Dish 150 mm dia x 45 mm depth82-2100 1 Non-Vacuum Desiccator 200 mm internal dia82-2200 1 Buchner Funnel No. 582-2260 1 Glass Funnel 110 mm dia82-2340 1 Filter Flask 1000 ml82-2500 1 Wash Bottle Polythene 500 ml82-4005 1 Glass Rods 7 mm dia x 200 mm. (pack of 10)82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g82-7700 1 Filter Pump82-7931 1 Filter Paper, equivalent to Whatman No 5024-4865/01 1 Constant Temperature Bath 0 to 99.9°CAlso required, but not part of the basic set:Set 24175/1/AR Also required products set

1 78-1215/01 Drying Oven 50 Litre capacity1 78-5447/01 Electronic Top Loading Balance1 23-3000 Riffle Box, 7 mm slot width1 79-0020 200 mm dia Receiver1 79-0070 200 mm dia BS Sieve 63 µm mesh.1 79-0140 200 mm dia BS Sieve 212µm mesh.1 79-0200 200 mm dia BS Sieve 600µm mesh.1 79-0270 200 mm dia BS Sieve 2.00 mm mesh.1 82-5230 Thermometer –10 to +250 x 1°C

Set 24185/1 Sand equivalent value, BS 1924,ASTM D2419, AASHTO T176

24-4917 1 Sand Equivalent Apparatus (ASTM D2419)24-4925 1 5 litre Syphon Assembly24-4947/01 1 Sand Equivalent Shaker24-4930 1 Calcium Chloride 2.5 kg24-4932 1 Formaldehyde 40% solution 2.5 litre24-4934 1 Glycerol Analar 2.5 litreAlso required, but not part of the basic set:Set 24185/1/AR Also required products set

1 81-0310 Trowel1 81-0518 Timer Clock1 81-4700 Stainless Steel Tray 305 mm dia

Set 24195 Determination of organic matter content,BS 1377

82-0420 1 Measuring Cylinder 250 x 2 ml82-1060 2 Volumetric Flask 1000 ml capacity82-1120 4 Conical Flask 500 ml capacity, wide mouthed82-1240 1 10 ml Graduated Pipette82-1440 1 Burette 50 ml82-1540 2 Weighing Bottle82-2100 1 Non-Vacuum Desiccator 200 mm i.d..82-2500 1 Wash Bottle Polythene 500 ml82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 gAlso required, but not part of the basic set:Set 24195/AR Also required products set

1 78-1215/01 Drying Oven 50 Litre capacity1 78-5447/01 Electronic Top Loading Balance1 78-7350 10 kg x 1g Field and Laboratory Scale1 23-3000 Riffle Box, 7 mm slot width1 23-3070 Riffle Box, 15 mm slot width1 79-2020 300 mm dia Receiver.1 79-2180300 mm dia BS Sieve 425µm mesh.1 79-2555 300 mm dia BS Sieve 10.0 mm perf. plate1 82-5230 Thermometer –10 to +250 x 1°C

Set 24205/1 Determination of loss-on-ignition, BS 137783-4160/01 1 1000°C Muffle Furnace82-2100 1 Non-Vacuum Desiccator 200 mm internal dia.82-3320 2 Porcelain Crucible 30 ml.82-3325 2 Porcelain lid for 82-3320

Continued

Buyer’s GuideSoil Testing: Sets 24215/1 to 24305

5

Set 24205/1 continued82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 gAlso required, but not part of the basic set:Set 24205/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-5447/01 Electronic top loading balance1 78-7350 10 kg x 1g Field and Laboratory Scale1 23-3000 Riffle Box, 7 mm slot width1 23-3070 Riffle Box, 15 mm slot width1 79-0020 200 mm dia Receiver1 79-0180 200 mm dia BS Sieve 425 µm mesh1 79-0270 200 mm dia BS Sieve 2.00 mm mesh1 82-5230 Thermometer –10 to +250 x 1°C

Set 24215/1 Determination of sulphate content,preparation of soil, acid extract, waterextract and groundwater, BS 1377

78-2950/01 1 200 mm dia Hotplate24-2850/01 1 Mechanical End-Over-End Shaker81-0094 1 Support Assembly81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall82-0200 3 Glass Beaker 600 ml squat form with spout82-0260 2 Beaker Cover 100 mm dia82-0276 4 500 ml Conical Beaker with glass cover82-0380 1 Measuring Cylinder 100 ml82-1240 1 10 ml Graduated Pipette82-1260 1 25 ml Graduated Pipette82-1300 1 Bulb Pipette 50 ml capacity82-1540 2 Weighing Bottle82-2100 1 Non-Vacuum Desiccator 200 mm i.d.82-2200 2 Buchner Funnel No. 582-2340 2 Filter Flask 1000 ml82-2460 2 Extraction Flask, 250 ml capacity82-2500 1 Wash Bottle Polythene 500 ml82-3300 2 Silica Crucible 35 mm dia 38 mm deep82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10)82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g82-7700 1 Filter Pump82-7901 1 Filter Paper No 74 equivalent to Whatman No 4082-7931 1 Filter Paper, equivalent to Whatman No 50Also required, but not part of the basic set:Set 24215/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-2950/01 200 mm dia Hotplate1 78-5447/01 Electronic top loading balance1 78-7350 10 kg x 1g Field and Laboratory Scale1 23-3070 Riffle Box, 15 mm slot width1 79-0010 200 mm dia Lid1 79-0020 200 mm dia Receiver1 79-0180 200 mm dia BS Sieve 425 µm mesh.1 79-0270 200 mm dia BS Sieve 2.00 mm mesh.1 82-5230 Thermometer -10 to +250 x 1°C

Set 24225/1 Determination of sulphate content,gravimetric method, BS 1377

83-4160/01 1 1000°C Muffle Furnace82-3320 1 Porcelain Crucible 30 ml82-3325 1 Porcelain LidAlso required, but not part of the basic set:Set 24215/1Set 24215/1/AR

Set 24245 Determination of carbonate content, rapidtitration method, BS 1377

82-0260 1 Beaker Cover 100 mm dia82-1120 1 Conical Flask 500 ml capacity, wide mouthed82-1140 1 Conical Flask 250 ml capacity wide mouthed82-1260 1 25 ml Graduated Pipette82-1460 2 Burette 100 ml (Class B) with single bore stopcockAlso required, but not part of the basic set:Set 24245/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-5447/01 Electronic top loading balance1 23-3000 Riffle Box, 7 mm slot width1 23-3070 Riffle Box, 15 mm slot width1 79-0020 200 mm dia Receiver1 79-0270 200 mm dia BS Sieve 2.00 mm mesh.1 82-1540 Weighing Bottle1 82-2100 Non-Vacuum Desiccator.1 82-5230 Thermometer –10 to +250 x 1°C

Set 24255/1 Determination of water- soluble and acid-soluble chloride content, BS 1377

24-2850/01 1 Mechanical End-Over-End Shaker82-0200 2 Glass Beaker 600 ml squat form with spout82-0460 1 Measuring Cylinder 500 x 5 ml soda glass, spouted82-1060 2 Volumetric Flask 1000 ml capacity with stopper82-1140 4 Conical Flask 250 ml capacity wide mouthed82-1260 1 25 ml Graduated Pipette82-1300 1 Bulb Pipette 50 ml capacity82-1440 2 Burette 50 ml (Class B) with single bore stopcock82-2100 1 Non-Vacuum Desiccator 200 mm internal diameter82-2200 1 Buchner Funnel No. 582-2500 1 Wash Bottle Polythene 500 ml82-3060 1 Reagent Bottle, 1000 ml capacity82-3145 2 Polythene Bottle, wide neck screw cap, 1 litre82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g82-7931 1 Filter Paper, equivalent to Whatman No 5082-7901 1 Filter Paper No 74 equivalent to Whatman No 40Also required, but not part of the basic set:Set 24255/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-5447/01 Electronic Top Loading Balance1 78-7350 10 kg x 1g Field and Laboratory Scale1 23-3000 Riffle Box, 7 mm slot width1 23-3070 Riffle Box, 15 mm slot width1 79-0020 200 mm dia Receiver1 79-0120 200 mm dia BS Sieve 150 µm mesh.1 79-0270 200 mm dia BS Sieve 2.00 mm mesh.1 82-5230 Thermometer -10 to +250 x 1°C

Set 24265/1 Determination of total dissolved solids,BS 1377

78-2950/01 1 200 mm dia Hotplate81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall82-1040 2 Volumetric Flask 500 ml capacity with stopper82-2000 2 Evaporating Dish 150 mm dia x 45 mm depth82-2100 1 Non-Vacuum Desiccator 200 mm i.d.82-2200 2 Buchner Funnel No. 582-2500 1 Wash Bottle Polythene 500 ml82-7091 1 Silica Gel, 6 – 16 mesh quantity 500 g82-7700 1 Filter Pump81-5020 1 Bowl, 2 litre capacity82-2340 1 Filter Flask 1000 ml82-7931 1 Filter Paper, equivalent to Whatman No 50Also required, but not part of the basic set:Set 24265/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-5335/01 Analytical Electronic Balance 210 x 0.1mg1 82-5230 Thermometer –10 to +250 x 1°C

Set 24275 Determination of pH value BS 1377525-210/01 1 Laboratory pH meter79-0020 1 200 mm dia Receiver79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh.81-4700 1 Stainless Steel Tray 305 mm dia.82-0120 3 Glass Beaker 100 ml capacity82-0260 3 Beaker Cover 100 mm dia82-1040 2 Volumetric Flask 500 ml capacity with stopper82-2500 1 Wash Bottle Polythene 500 ml82-4005 1 Glass Rods 7 mm dia x 200 mm, (pack of 10)Also required, but not part of the basic set:Set 24275/AR Also required products set

1 78-5335/01 Analytical Electronic Balance 210 x 0.1mg1 46-4821/80 Magnetic Stirrer

Set 24305 Dry density/moisture relationship, 2.5 kgrammer method, (for up to medium gravelsize), BS 1377, 1924

24-9000 1 BS Standard Compaction Mould24-9002 1 Standard Compaction Rammer 2.5 kg79-0020 1 200 mm dia Receiver79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0100 1 Spatula, 100 mm Blade24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24305/AR Also required products set

1 78-7350 10 kg x 1g Field and Laboratory Scale1 23-4200 Proctor/Core Cutter Extruder

Set 23055/1

Buyer’s GuideSoil Testing: Sets 24315 to 24425/1

6

Set 24315 Dry density/moisture relationship 2.5 kgrammer method (for soils with some coarsegravel), BS 1377

24-9002 1 Standard Compaction Rammer 2.5 kg24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould79-0020 1 200 mm dia Receiver79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0100 1 Spatula, 100 mm blade24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24315/AR Also required products set

1 78-7500 25 kg x 1g Field and Laboratory Scale1 23-4250 CBR/Core Cutter Extruder

Set 23055/1

Set 24325 Dry density/moisture relationship, 4.5 kgrammer method (for up to medium gravelsize), BS 1377

24-9000 1 BS Standard Compaction Mould24-9004 1 BS Compaction Rammer79-0020 1 200 mm dia Receiver79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate.79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate.81-0100 1 Spatula, 100 mm blade24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24305/ARSet 23055/1

Set 24335 Dry density/moisture relationship, 4.5 kgrammer method (for soils with some coarsegravel), BS 1377

24-9004 1 BS Compaction Rammer24-9198 1 BS CBR Mould Body.24-9200 1 BS Extension Collar24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould79-0020 1 200 mm Dia Receiver79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0100 1 Spatula, 100 mm blade24-9010 1 Straight Edge, 300 mm.81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24315/ARSet 23055/1

Set 24345/1 Dry density/moisture relationship, vibratinghammer method, BS 1377

47-0455/01 1 Vibrating Hammer24-9025 1 Tamping Foot and Shank 300 mm24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould34-0140 1 Steel Rule 300 mm79-0020 1 200 mm dia Receiver79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate.81-0220 1 Aluminium Scoop, large81-0518 1 Timer Clock24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24315/ARSet 23055/1

Set 24355 Moisture/density relationship of soils andsoil-cement mixtures, ASTM D558, D698,D1557, AASHTO T4,T99,T180

24-9060 1 Proctor Mould, 1/30 ft3

24-9063 1 ASTM Compaction Rammer 2.5 kg24-9066 1 ASTM Compaction Mould, 152 mm24-9070 1 ASTM Compaction Rammer 4.5 kg81-0100 1 Spatula, 100 mm blade24-9010 1 Straight Edge, 300 mm81-4080 1 Sample Tray 610 x 610 x 63 mmAlso required, but not part of the basic set:Set 24355/AR Also required products set

1 78-7090 Harvard Trip Balance 2000 g capacity x 0.1g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7500 25 kg x 1g Field and Laboratory Scale1 23-4250 CBR/Core Cutter Extruder1 23-4300 Adaptor Plate1 79-5020 8 in. dia ASTM Sieve 4.75 mm mesh.1 79-5400 8 in. dia Lid.1 79-5410 8 in. dia Receiver.1 79-5560 8 in. dia ASTM Sieve 19.0 mm mesh.1 79-5630 8 in. dia ASTM Sieve 50.0 mm mesh.1 81-0335 Trowel

Set 23055/1

Set 24385 Determination of maximum density ofsands, BS 1377

79-0020 1 200 mm dia Receiver79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh82-0500 1 Measuring Cylinder 1000 x 10 mlAlso required, but not part of the basic set:Set 24385/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-7140 Triple Beam Balance 2610g x 0.1g1 78-7155 Scoop and Counterweight

Set 24395 Determination of minimum density ofgravelly soils, BS 1377

24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9204 1 BS Solid Base or Top Plate79-0020 1 200 mm dia Receiver79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0220 1 Aluminium Scoop, large24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24395/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-7500 25 kg x 1g Field and Laboratory Scale

Set 24405/2 Maximum and minimum index density ofsoils, ASTM D4253, D4254

81-0220 1 Aluminium Scoop, large81-0518 1 Timer Clock81-4040 1 Sample Tray 460 x 460 x 50 mm81-4080 1 Sample Tray 610 x 610 x 63 mm78-5650/01 1 Electronic Platform Scale 60 kg x 10 g24-9010 1 Straight Edge, 300 mm24-9112/06 1 Vibratory Table24-9114 1 Relative Density Mould Set 0.1 ft3

24-9116 1 Relative Density Mould Set 0.5 ft3

24-9118 1 Relative Density Gauge Set

Set 24425/1 Determination of the CBR, laboratorymethod, penetration test, BS 1377

78-0760 1 28 kN Clamped Boss Load Ring24-9160/01 1 50 kN CBR Test Machine24-9182 1 Penetration Piston24-9186 1 Penetration Dial Gauge24-9188 1 Bracket and Adaptor24-9214 1 2 kg Annular Surcharge Weight24-9216 4 2 kg Split Surcharge Weight.


7

Set 24435 Sample preparation for CBR by staticcompression, BS 1377

24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9202 1 BS Perforated Base Plate24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould24-9212 3 Static Compaction Plug.34-0130 1 Tamping Rod 16 mm Dia x 600 mm long79-2020 1 300 mm dia Receiver79-2515 1 300 mm dia BS Sieve 5.00 mm perforated plate79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate81-0140 1 Spatula 200 mm blade24-9010 1 Straight Edge, 300 mm24-9220 1 Filter Papers 150 mm diaAlso required, but not part of the basic set:Set 24435/AR Also required products set

1 36-0671 Compact 1500 Hand-operated CompressionMachine

1 78-7500 25 kg x 1g Field and Laboratory ScaleSet 23055/1

Set 24445 Sample preparation for CBR by dynamiccompaction, 2.5 kg rammer, BS 1377

24-9002 1 Standard Compaction Rammer 2.5 kg24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould79-0020 1 200 mm dia Receiver79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0100 1 Spatula, 100 mm blade24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24315/ARSet 23055/1

Set 24455 Sample preparation for CBR by dynamiccompaction, 4.5 kg rammer, BS 1377

24-9004 1 BS Compaction Rammer, 4.5kg24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould79-0020 1 200 mm dia Receiver79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0100 1 Spatula, 100 mm blade24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24315/ARSet 23055/1

Set 24465/1 Sample preparation for CBR by vibratingcompaction, BS 1377

47-0455/01 1 Vibrating Hammer24-9025 1 Tamping Foot and Shank 300 mm24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9204 2 BS Solid Base or Top Plate24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould34-0140 1 Steel Rule 300 mm.79-0020 1 200 mm dia Receiver79-1640 1 200 mm dia BS Sieve 37.5 mm perforated plate81-0220 1 Aluminium Scoop, large81-0518 1 Timer Clock24-9010 1 Straight Edge, 300 mm81-4160 1 Sample Tray 910 x 910 x 76 mmAlso required, but not part of the basic set:Set 24315/ARSet 23055/1

Set 24475 Sample preparation for CBR by obtaining anundisturbed sample, BS 1377

24-9198 1 BS CBR Mould Body24-9200 2 BS Extension Collar24-9202 1 BS Perforated Base Plate24-9204 2 BS Solid Base or Top Plate24-9206 1 CBR Cutting Collar24-9208 2 C-Spanner for BS CBR Mould24-9210 1 Base Plate Tool for BS Mould

Set 24485/1 CBR, laboratory, ASTM D1883,AASHTO T193

78-0760 1 28 kN Clamped Boss Load Ring24-9063 1 ASTM Compaction Rammer 2.5 kg24-9070 1 ASTM Compaction Rammer 4.5 kg24-9160/01 1 50 kN CBR Test Machine24-9182 1 Penetration Piston24-9184 2 Penetration/Swell Dial Gauge,ASTM24-9188 1 Bracket and Adaptor24-9228 1 ASTM CBR Mould24-9238 1 ASTM Spacing Disc24-9240 4 Filter Screen 150 mm dia24-9243 1 4.5 kg Annular Surcharge Weight ASTM24-9244 4 5 lb (2.27 kg) Split Surcharge Weight24-9260 1 Swell Plate24-9262 1 Swell Tripod24-9010 1 Straight Edge, 300 mm.24-9250 1 Filter Paper, equivalent to Whatman No 5Also required, but not part of the basic set:Set 24485/1/AR Also required product set

1 24-9268 Soaking Tank.Set 23055/1

Set 24495 Expansion (swell) test, BS 137724-9275 1 Dial Gauge, 25 mm travel x 0.01 mm divisions24-9198 1 BS CBR Mould Body24-9200 1 BS Extension Collar24-9202 1 BS Perforated Base Plate24-9260 1 Swell Plate24-9262 1 Swell Tripod81-3540 1 Plastic Sample ContainerAlso required, but not part of the basic set:Set 24485/1/AR

Set 24505 CBR, in-situ, ASTM D442978-0460 1 10 kN Clamped Boss Load Ring78-0760 1 28 kN Clamped Boss Load Ring24-9183 1 CBR Penetration Piston (adjustable)24-9184 1 Penetration/Swell Dial Gauge,ASTM24-9188 1 Bracket and Adaptor24-9290 1 45 kN (10000 lb) Capacity Mechanical Jack24-9300 1 Ball Seating for EL24-9290 45 kN Jack24-9308 1 Set of Extension Rods24-9312 1 Datum Bar Assembly24-9320 1 10 lb (4.5 kg) Annular Surcharge Weight24-9322 2 10 lb (4.5 kg) Slotted Surcharge Weight24-9324 2 9.1 kg Slotted Surcharge Weight24-9298 1 Land Rover B racket

Set 24515 Determination of the CBR, in-situ, BS 137778-0760 1 28 kN Clamped Boss Load Ring24-9183 1 CBR Penetration Piston (adjustable)24-9186 1 Penetration Dial Gauge, BS24-9188 1 Bracket and Adaptor24-9290 1 45 kN (10000 lb) Capacity Mechanical Jack24-9300 1 Ball Seating for EL24-9290 45 kN Jack24-9308 1 Set of Extension Rods24-9312 1 Datum Bar Assembly24-9320 1 10 lb (4.5 kg) Annular Surcharge Weight24-9322 3 10 lb (4.5 kg) Slotted Surcharge Weight24-9298 1 Land Rover B racket

Set 25015 One-dimensional consolidation, BS 137725-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions25-0402 1 Consolidation Frame25-0408 1 Set of Weights, 100 kg25-0503 1 Consolidation Cell, 75 mm diameter sample25-0509 1 Calibration Disc, 75 mm cell81-0518 1 Timer ClockAlso required, but not part of the basic set:Set 25015/AR Also required product set

1 25-0429 Floor Mounting StandSet 23055/1

Buyer’s GuideSoil Testing: Sets 25025 to 25115/1

8

Set 25025 Permeability of soil, constant headpermeameter, BS 1377

25-0580 1 Constant Head Permeability cell 75 mm dia25-0591 1 Manometer Tubes and Stand25-0593 1 Constant Level Tank42-4580 1 Tamping Rod 8 mm dia x 300 mm81-0200 1 Aluminium Scoop, small81-0518 1 Timer clock82-0380 1 Measuring Cylinder 100 ml82-0460 1 Measuring Cylinder 500 x 5 ml soda glass, spouted82-1060 1 Volumetric Flask 1000 ml capacity with stopper82-2660 1 Polythene Funnel 200 mm dia.82-5010 1 Thermometer –10 to +50 x 0.5°CAlso required, but not part of the basic set:25025/AR Also required products set

1 81-0375 Red Rubber Tubing1 82-7720/01 Vacuum Pump

Set 25035 Permeability of soil, falling headpermeameter

25-0605 1 Falling Head Permeability cell.25-0609 1 Standpipe Panel.25-0611 1 De-Airing Tank.25-0613 1 Soaking Tank.81-0518 1 Timer clock82-0380 1 Measuring Cylinder 100 mlAlso required, but not part of the basic set:Set 25025/AR

Set 25045 Determination of erodibility, pinholemethod, BS 1377, ASTM D4647

25-0675 1 Pinhole Dispersion Test Apparatus42-4580 1 Tamping Rod 8 mm dia x 300 mm81-0518 1 Timer Clock82-0290 2 10 ml capacity Measuring Cylinder82-0300 2 Measuring Cylinder 25 x 0.5 ml soda glass, spouted82-0340 2 Measuring Cylinder 50 x 1 ml soda glass, spoutedAlso required, but not part of the basic set:Set 25045/AR Also required products set

1 79-0020 200 mm Dia Receiver1 79-0270 200 mm dia BS Sieve 2.00 mm mesh

Set 23055/1

Set 25055/1 Determination of the rate of consolidationof soils using an ELE/Rowe-type hydraulicconsolidation cell, BS 1377

25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions25-0705 1 ELE/Rowe cell, complete 151.4 mm dia. sample26-1865 1 Pressure Indicating Panel, 1700 kPa26-1890 1 Twin-Burette Volume- Change Unit27-1110/01 1 4 Channel Digital Pressure Readout Unit27-1625 1 Pressure Transducer Assembly 1000 kPa26-1880 1 Universal Pump and Pressure Indicating PanelAlso required, but not part of the basic set:Set 25055/1/AR Also required product set

1 25-1833/01 De-aired Water ApparatusSet 26015/1

Set 25060/1 Measurement of hydraulic conductivity oftoxic permeant, 70 mm dia flexible wallpermeameter

25-0685/01 1 Tri-Flex 2 Single Cell Permeability Apparatus25-0695 2 Pressure Interface Chamber for toxic permeants25-0695/10 1 70 mm Specimen Cap and Base Set25-6441 1 Rubber Membrane 70 mm/2.8 inch dia. Pack of 1025-6561 1 Porous Disc 70 mm diameter Pack of 225-6461 1 Membrane Sealing Ring 70 mm dia. Pack of 1025-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter25-6480 1 Suction Membrane Device 70 mm diameterAlso required, but not part of the basic set:Set 25060/1/AR Also required products set

1 83-1735/01 Air Compressor Unit, 1000 kPa1 26-1926 Nylon Tubing, 6 mm OD, 3500 kPa

Set 25075 Determination of unconfined compressivestrength, BS 1377, ASTM D2166

81-0518 1 Timer Clock81-0586 1 Vernier Callipers24-9010 1 Straight Edge, 300 mm25-3605 1 Unconfined Compression TesterAlso required, but not part of the basic set:Set 25075/AR Also required products set

1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop

Set 23055/1

Set 25085 Autographic unconfined compressivestrength, BS 1377

23-4090 1 38 mm Hand Operated Hydraulic Sample Extruder23-4120 1 38 mm Split Former.23-4140 1 Cutting Tool25-3625 1 Autographic Unconfined Compression Apparatus34-0140 1 Steel Rule 300 mm81-0586 1 Vernier Callipers24-9010 1 Straight Edge, 300 mmAlso required, but not part of the basic set:Set 25075/AR

Set 25095/1 Determination of compressive undrainedtriaxial strength (QUTXL) 38 mm diametersamples, BS 1377

78-0060 1 2 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions.25-3476/01 1 Tritest 10, 10 kN load frame, multi-speed drive.25-4047 1 50 mm Triaxial Cell 1700 kPa25-4166 1 38 mm/1.5 inch Base Adaptor25-4290 1 Membrane Placing Tool 35 mm/38 mm25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter25-5061 1 Rubber Membrane 38 mm/1.5 inch dia. Pack of 1025-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 1025-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.Also required, but not part of the basic set:Set 25095/1/AR Also required products set

1 26-1800/01 Pressure Test 17001 26-1815 Pressure Gauge 1700 kPa

10 26-1926 Nylon Tubing, 6 mm OD. Price per metre.

Set 25105/1 Determination of compressive undrained ordrained triaxial strength (CU/CD) BS 1377

78-0260 1 4.5 kN Clamped Boss Load Ring, compression25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions25-3516/01 1 Digital Tritest 5025-4047 1 50 mm Triaxial Cell 1700 kPa25-4166 1 38 mm/1.5 inch Base Adaptor25-4290 1 Membrane Placing Tool 35 mm/38 mm25-4520 2 Valve, no volume change 1/4 inch BSP25-4540 1 10 ml Burette, single tube drainage25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter25-5061 1 Rubber Membrane 38 mm/1.5 inch dia. Pack of 1025-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 1025-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter25-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 225-5200 1 Filter Paper Drain 38 mm/1.5 inch dia. Pack of 5027-1110/01 1 4 Channel Digital Pressure Readout Unit27-1625 1 Pressure Transducer Assembly 1000 kPaAlso required, but not part of the basic set:Set 25105/1/AR Also required products set

1 25-1833/01 De-aired Water Apparatus1 26-1880 Universal Pump and Pressure Indicating Panel1 26-1890 Twin-Burette Volume- Change Unit.

20 26-1926 Nylon Tubing, 6 mm OD. Price per metre.Set 26015/1

Set 25115/1 Integrated stress path system for 38 mmsamples

25-9810 1 ELE Stress Path Cell complete with 4.5 kNSubmersible Load Transducer

25-9810/12 1 Vacuum Pad for ELE Stress Path Cell25-9810/15 1 38 mm Base Adaptor for ELE Stress Path Cell25-9810/16 1 38 mm Pressure Pad for ELE Stress Path Cell25-9880 1 Pressure Control System.25-9885/01 1 ELE Stress Path Control System25-9892 1 50 mm Axial Strain Transducer.25-9896 1 Management Software Package26-1870 1 6-Way Water Distribution Panel for Oil/Water

Systems26-1883 1 Vacuum Gauge27-1625 3 Pressure Transducer Assembly 1000 kPa27-1635 1 Pressure Transducer Assembly 3500 kPa27-1641 1 Volume Change Transducer Assembly 80 cm3

Also required, but not part of the basic set:Set 25115/1/AR Also required product set

1 83-1735/01 Air Compressor Unit, 1000 kPa1 26-1769 Nylon Tubing 30 metre length.1 25-1833/01 De-aired Water Apparatus1 27-1450/01 Pentium P233 PC System

Buyer’s GuideSoil Testing: Sets 25120/1 to 29075

9

Set 25120/1 Integrated stress path system for 38 mmsamples

25-3516/01 1 Digital Tritest 5025-4117 1 70 mm Triaxial Cell 1700 kPa25-4172 1 Base Adaptor for 38 mm specimen25-4290 1 Membrane Placing Tool 35 mm/38 mm25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter.25-5061 1 Rubber Membrane 38 mm/1.5 inch dia. Pack of 1025-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 1025-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 2.25-9881 1 Modified Pressure Control System25-9885/01 1 ELE Stress Path Control System comprising control

interface and integrated power supply25-9896 1 Management Software Package26-1870 1 6-Way Water Distribution Panel27-1293 1 Distance Piece27-1573 1 Submersible Load Transducer Assembly, 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1625 3 Pressure Transducer Assembly 1000 kPa27-1641 1 Volume Change Transducer Assembly 80cm3

Set 26015/1 Pneumatic pressure system for twoindependent variable pressure sources(700 kPa continuous pressure)

83-1730/01 1 Air compressor Unit, 700 kPa working pressure26-1746 2 Bladder-type Air/Water Pressure Assembly26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa26-1769 1 Nylon Tubing 30 metre length.

Set 26045/1 Direct/residual shear test, 60 mm squarespecimen, BS 1377

78-0160 1 3 kN Clamped Boss Load Ring, compression.25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions.26-2112/01 1 Digital Direct/Residual Shear Apparatus26-2132 1 Set of Weights, 50 kg slotted, uncalibrated83-5456 1 Dial Gauge, 12 mm travel x 0.01 mm divisions26-2181 1 Shear Box Assembly, 60 mm square26-2185 1 Specimen Cutter, 60 mm square26-2189 1 Specimen Extrusion Tool, 60 mm square

Set 26055/1 Direct shear test, 2.5 inch diameterspecimen, ASTM D3080

78-0060 1 2 kN Clamped Boss Load Ring, compression25-0440 1 Dial Gauge 10 mm travel x 0.002 mm divisions26-2112/01 1 Digital Direct/Residual Shear Apparatus26-2132 1 Set of Weights, 50 kg slotted, uncalibrated83-5456 1 Dial Gauge, 12 mm travel x 0.01 mm divisions26-2213 1 Shear Box Assembly, 2.5 inch diameter26-2217 1 Specimen Cutter 2.5 inch diameter.26-2221 1 Specimen Extrusion Tool, 2.5 inch diameter.

Set 26065 Determination of shear strength by thelaboratory vane method, BS 1377

26-2270 1 Laboratory Vane Apparatus26-2289 1 Attachment34-0140 1 Steel Rule 300 mm81-0518 1 Timer clock

Set 29015 Bearing capacity of soil for static load onspread footings, 500 kN capacity,ASTM D1194, D1195, D1196

29-3794 1 500 kN Hydraulic Jack29-3808 1 Hand Operated Pressure System for 500 kN Jack.29-3818 1 Datum Bar Assembly.29-3822 4 Dial Gauge, 50 mm travel x 0.01 mm divisions29-3826 1 Bearing Plate 150 mm dia.29-3834 1 Bearing Plate 305 mm dia.29-3838 1 Bearing Plate 455 mm dia.29-3846 1 Bearing Plate 760 mm dia.

Set 29035 Dry density in-situ, sand replacementmethod (suitable for cohesive soils),BS 1377, 1924

29-4000 1 100 mm Sand Pouring Cylinder29-4020 1 100 mm Calibrating Container29-4040 1 Metal Tray, 300 mm sq. x 40 mm deep29-5000 1 Density Spoon29-5080 1 Metal Dibber Tool29-5100 1 Scraper29-5140 1 Steel Pointed Rod81-4700 1 Stainless Steel Tray 305 mm dia24-0430 1 Glass Plate82-7401 1 Standard Sand 600-300 µm.

Set 29045 Dry density in-situ, sand replacementmethod, BS 1377, 1924

29-4200 1 200 mm Sand Pouring Cylinder.29-4220 1 200 mm Calibrating Container29-4240 1 Metal Tray, 500 mm sq x 50 mm deep29-5000 1 Density Spoon.29-5080 1 Metal Dibber Tool29-5100 1 Scraper.29-5140 1 Steel Pointed Rod.81-4160 1 Sample Tray 910 x 910 x 76 mm24-0430 1 Glass Plate.82-7401 1 Standard Sand 600-300 µm. Fraction

Set 29055 Density of soil in place, sand cone method,ASTM D1556, AASHTO T191

29-4300 1 6 Inch (152 mm) Sand Cone.29-4320 1 5 Litre Plastic Container for Sand Cone.29-4340 1 Density Plate for EL29-4300.82-7401 1 Standard Sand 600-300 µm.Also required, but not part of the basic set:29055/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7350 10 kg x 1 g Field and Laboratory Scale1 29-5000 Density Spoon1 29-5020 Soft Headed Mallet1 29-5060 Density Chisel1 29-5120 Density Hand Pick1 81-3060 Sample Container. 10 litre capacity1 81-4020 Sample Tray 306 x 306 x 38 mm1 82-5010 Thermometer –10 to +50 x 0.5°C

Set 29065 Density of soil in place by the rubber balloonmethod, ASTM D2167, AASHTO T205

29-4520 1 Balloon Density Apparatus29-4540 10 Flexible Balloon29-4560 1 Density Plate29-5000 1 Density Spoon29-5060 1 Density Chisel29-5120 1 Density Hand Pick81-2979 20 Unnumbered Moisture Content Tin 90g capacity81-3000 10 Sample Container. 0.5 litres capacity81-3060 10 Sample Container. 10 litres capacity81-4020 3 Sample Tray 306 x 306 x 38 mm81-4775 100 Polythene Bag82-5010 1 Thermometer –10 to +50 x 0.5°CAlso required, but not part of the basic set:Set 29065/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7500 25 kg x 1g Field and Laboratory Scale

Set 29075 Dry density in-situ, core-cutter method,BS 1377

29-5300 3 Core Cutter29-5320 1 Driving Dolly for EL 29-530029-5340 1 Driving Rammer for EL 29-532034-0140 1 Steel Rule 300 mm81-0140 1 Spatula 200 mm blade24-9010 1 Straight Edge, 300 mmAlso required, but not part of the basic set:Set 24305/ARSet 23055/1

Buyer’s GuideConcrete Testing: Sets 34015 to 34215

10

Set 34015 Mixing and sampling fresh concrete, site andlaboratory, BS 1881-101 and -125

81-0222 1 Scoop, stainless steel, 250 mm long, 125 mm dia.81-0240 1 Shovel (flat)81-4230 1 Sample Tray81-3545 1 20 litre Transport/ Storage ContainerAlso required, but not part of the basic set:Set 34015/AR Also required product set

1 34-3530/01 ELE Concrete Mixer

Set 34025 Determination of slump, BS 1881-102,BS 5075, ASTM C143

34-0110 1 Slump Cone34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-0140 1 Steel Rule 300 mm34-0160 1 Base Plate 607 x 404 x 9 mm34-0180 1 Slump Cone Funnel81-0220 1 Aluminium Scoop, large81-0521 1 Stop WatchAlso required, but not part of the basic set:Set 34015

Set 34035 Determination of compacting factor,BS 1881-103, BS 5075

34-0130 1 Tamping Rod 16 mm Dia x 600 mm long34-0200 1 Compacting Factor Apparatus34-2910 1 Compacting Bar 25 mm sq x 380 mm81-0340 1 Plasterers Steel Float.Also required, but not part of the basic set:Set 34035/AR Also required product set

1 22-7500 25 kg x 1g Field and Laboratory ScaleSet 34015

Set 34045/1 Determination of Vebe time,BS 1881-104

34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-0300/01 1 Vibro Consistometer81-0220 1 Aluminium Scoop, large81-0521 1 Stop WatchAlso required, but not part of the basic set:Set 34015

Set 34055 Determination of flow,BS 1881-105; DIN 1048

34-0450 1 Apparatus for Determining Flow in Concrete81-0220 1 Aluminium Scoop, largeAlso required, but not part of the basic set:Set 34015

Set 34075 Setting time by penetration resistance,ASTM C403, AASHTO T197

29-3925 1 Proctor Penetrometer spring type34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-0810 1 Set of Needle Points 1, 1/2, 1/4, 1/10, 1/20, 1/40 in2

34-5230 3 150 mm dia cylinder Mould 150 mm long82-2820 1 Syringe with rubber bulb.Also required, but not part of the basic set:Set 34075/AR Also required product set

1 79-5820 12 dia ASTM Sieve 4.75 mm mesh

Set 34125 Density of compacted fresh concrete,BS 1881-107

34-2830 1 10 dm3 Bulk Density Measure34-2910 1 Compacting Bar 25 mm sq x 380 mm24-9010 1 Straight Edge, 300 mmAlso required, but not part of the basic set:Set 34125/AR Also required product set

1 78-5650/01 Electronic Platform Scale 60 kg x 10 gSet 34015

Set 34130 Density of partially compacted semi-dryconcrete, BS 1881-129

34-2830 1 10 dm3 Bulk Density Measure81-0222 1 Scoop, stainless steel. 250 mm long by 125 mm dia.81-0240 1 Shovel (flat)81-4160 1 Sample Tray 910 x 910 x 76 mm24-9080 1 Harvard Miniature Compaction Apparatus82-5313 1 Protected Thermometer –15 to +60°CAlso required, but not part of the basic set:Set 34125/AR

Set 34135 Weight per cubic metre of fresh concrete,ASTM C138, AASHTO T121

34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-0160 1 Base Plate 607 x 404 x 9 mm34-2800 1 Bulk Density Measure, 30 dm3 capacity34-2820 1 Bulk Density Measure, 15 dm3 capacity34-2830 1 10 dm3 Bulk Density Measure24-9010 1 Straight Edge, 300 mm

Set 34140 Density of hardened concrete,BS 1881-114

34-8100/01 1 Buoyancy Balance, 15 kg x 0.5 g34-8105 1 CradleAlso required, but not part of the basic set:Set 34140/AR Also required product set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-1245 Dial Thermometer 0 to 300°C

Set 34165 Air content of fresh concrete, type Bmethod BS1881; ASTM C231, DIN 1048

29-5020 1 Soft headed mallet.34-3265 1 Air Entrainment Meter B Type34-2910 1 Compacting Bar 25 mm sq x 380 mm34-0130 1 Tamping Rod 16 mm dia x 600 mm longAlso required, but not part of the basic set:Set 34165/AR Also required products set

1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7500 25 kg x 1g Field and Laboratory Scale1 38-7060 Glass Plate 100 mm sq.1 82-1880 500 ml Plastic Measuring Cylinder.1 24-0430 Glass Plate.

Set 34015

Set 34175 Bleeding of concrete method A,ASTM C232

34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-2820 1 Bulk Density Measure, 15 dm3 capacity.82-0380 1 Measuring Cylinder 100 ml82-2820 1 Syringe with rubber bulbAlso required, but not part of the basic set:Set 34175/AR Also required product set

1 88-1428/01 ES series Bench Scale

Set 34195 Making 100 mm test cubes from freshconcrete, BS 1881-108

34-2910 1 Compacting Bar 25 mm sq x 380 mm34-4520 6 100 mm Cube Mould, clamp type34-5275 2 Spanner for cube beam cylinder moulds81-0220 1 Aluminium Scoop, large81-0340 1 Plasterers Steel Float81-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)Also required, but not part of the basic set:Set 34195/AR Also required products set

1 34-3530/01 ELE Concrete Mixer, 56 dm3 capacity1 34-6220/01 Vibrating Table 625 x 313 mm table top

Set 34015

Set 34205 Making 150 mm test cubes from freshconcrete, BS 1881-108

34-2910 1 Compacting Bar 25 mm sq x 380 mm34-4570 6 150 mm Cube Mould, clamp type34-5275 2 Spanner for cube beam cylinder moulds81-0220 1 Aluminium Scoop, large81-0340 1 Plasterers Steel Float.81-0705 1 Wire Brush.82-7341 1 Mould Oil (25 litre Drum)Also required, but not part of the basic set:Set 34195/ARSet 34015

Set 34215 Making test beams from fresh concrete:150 x 150 x 750 mm, BS 1881-109

34-2910 1 Compacting Bar 25 mm sq x 380 mm34-5050 6 150 x 150 x 750 mm Beam Mould.34-5275 2 Spanner for cube beam cylinder moulds81-0220 1 Aluminium Scoop, large81-0340 1 Plasterers Steel Float81-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)Also required, but not part of the basic set:Set 34195/ARSet 34015

Concrete Testing Sets

Buyer’s GuideConcrete Testing: Sets 34225 to 36060/1

11

Set 34225 Making test beams from fresh concrete:100 x 100 x 500 mm, BS 1881-108

34-2910 1 Compacting Bar 25 mm sq x 380 mm34-5000 6 100 x 100 x 500 mm Beam Mould.34-5275 2 Spanner for cube beam cylinder moulds81-0220 1 Aluminium Scoop, large81-0340 1 Plasterers Steel Float81-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)Also required, but not part of the basic set:Set 34195/ARSet 34015

Set 34235 Making test cylinders from fresh concrete:150 mm diameter x 300 mm,BS 1881-110

34-5260 6 150 mm dia Cylinder Mould 300 mm long34-2910 1 Compacting Bar 25 mm sq x 380 mm81-0340 1 Plasterers Steel Float81-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)81-0220 1 Aluminium Scoop, largeAlso required, but not part of the basic set:Set 34195/ARSet 34015


34-2910 1 Compacting Bar 25 mm sq x 380 mm34-5230 6 150 mm dia Cylinder Mould 150 mm long34-5275 2 Spanner for cube beam cylinder moulds81-0220 1 Aluminium Scoop, large81-0340 1 Plasterers Steel Float81-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)Also required, but not part of the basic set:Set 34195/ARSet 34015


34-2910 1 Compacting Bar 25 mm sq x 380 mm34-5210 6 100 mm dia Cylinder Mould 200 mm long34-5275 2 Spanner for cube beam cylinder moulds81-0220 1 Aluminium Scoop, large81-0340 1 Plasterers Steel Float81-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)Also required, but not part of the basic set:Set 34195/ARSet 34015

Set 34265 Making/curing concrete specimensASTM C231,C192, AASHTO T23,T126

34-0130 1 Tamping Rod 16 mm Dia x 600 mm long34-5000 3 100 x 100 x 500 mm Beam Mould34-5050 3 150 x 150 x 750 mm Beam Mould34-5275 2 Spanner for cube beam cylinder moulds81-0340 2 Plasterers Steel Float81-0705 1 Wire Brush81-4080 1 Sample Tray 610 x 610 x 63 mm82-7341 1 Mould Oil (25 litre drum)34-5260 6 150 mm dia Cylinder Mould 300 mm longAlso required, but not part of the basic set:Set 34265/AR Also required products set

1 78-7500 25 kg x 1g Field and Laboratory Scale1 34-3530/01 ELE Concrete Mixer, 56 dm3 capacity1 34-6260/01 Vibrating Table 1250 x 625 mm Table Top1 34-6545/01 Large Curing Tank1 34-6690 Removable Lower Rack for Curing Tank

Set 34025Set 34165Set 34315/1

Set 34315/1 Sulphur capping 150 mm hardened cylindersand cores, BS 1881-110 and -120

34-6031 1 Cylinder Capping Frame34-6051 1 Capping Plate, BS1881, for 100 mm specimens34-6091 1 Capping Plate, BS1881, for 150 mm specimens81-0701 1 Wax Ladle34-6120/01 1 Melting Pot for use with Capping Compound34-6100 1 Flake Capping Compound

Set 34325/1 Sulphur capping 100 mm hardened cylindersand cores, BS 1881-110 and -120

34-6031 1 Cylinder Capping Frame34-6050 1 Capping Plate for 100 mm specimens, ASTM C61734-6090 1 Capping Plate for 150 mm specimens, ASTM C61781-0701 1 Wax Ladle34-6120/01 1 Melting Pot for use with Capping Compound34-6100 1 Flake Capping Compound

Set 34345/1 Normal curing of test specimens,(20°C method), BS 1881-111

34-6545/01 1 Large Curing Tank34-6690 1 Removable Lower Rack for Large Curing Tank.82-5315 1 Max-MinThermometer –20 to +50°C (–10 to +130°F)Also required, but not part of the basic set:Set 34345/1/AR Also required products set

1 34-6600 Steel Stand for Curing Tank1 34-6710 Set of Eight Upper Racks

Set 34375 Determination of drying, shrinkage andmoisture movement, BS 1881

34-2910 1 Compacting Bar 25 mm sq x 380 mm34-8500 1 Drying Shrinkage and Moisture Movement Apparatus34-8515 1 BS Length Comparator 300 mm long34-8538 1 Prism Mould 75 x 75 x 254 mm34-8541 5 Steel inserts for EL34-8538 (Pack of 10)Also required, but not part of the basic set:Set 34375/AR Also required products set

1 34-6755/01 Small Curing Tank1 78-4200/01 Moisture Conditioning Oven

Set 35395/1 Determination of total absorption,BS 1881-122

78-1235/01 1 250°C Fan Circulated Oven78-1245 1 Dial Thermometer 0 to 300°C78-7250 1 5 kg Field and Laboratory Scale with Flat Pan34-6755/01 1 Small Curing Tank82-2110 1 Desiccator Cabinet Non-vacuum82-7091 2 Silica Gel, 6–16 mesh quantity 500 gAlso required, but not part of the basic set:Set 35395/1/AR Also required products set

1 47-5160 Concrete Core Drill, petrol driven1 47-5525 75 mm Core Barrel solid back end type

(Adaptor required for use with ELE Core Drills pre July1999. Currently using expander coupling)

Set 35405 Determination of initial surface absorption(ISAT), BS 1881-208

35-3985 1 Reservoir, Capillary Tube and Scale35-3989 1 Cap for Smooth Horizontal Surfaces81-0518 1 Timer ClockAlso required, but not part of the basic set:Set 35405/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C .1 82-2110 Desiccator Cabinet Non-vacuum.1 82-7091 Silica Gel, 6 – 16 mesh quantity 500 g

Set 35410 Determination of concrete impermeability,DIN 1048

35-4000 1 Concrete Impermeability Apparatus35-4000/13 3 Steel Spacer 200 x 200 x 80 mm34-4620 3 200 mm Cube Mould, clamp type

Set 36015/1 Standard concrete cube and cylindercompression testing of 100 mm and150 mm specimens

36-0691/01 1 Compact 1500 Standard Compression Machine37-5000 1 Standard Distance Piece 50 mm effective height37-5050 1 Standard Distance Piece, 80 mm effective height37-5100 1 Standard Distance Piece 100 mm effective height

Set 36060/1 Compression Testing of 150 mm Cubes andFlexural Testing of Beams, Kerbs, Blocks andFlags BS 340, 368,1881

36-3276/01 1 ADR 2000 BS Compression Machine37-5170 1 Distance Piece to BS1881, 80 mm effective height37-5180 1 Distance Piece to BS1881, 100 mm effective height37-6138 1 100 kN Flexural Fitting Kit (ADR)37-6140 1 100 kN Flexural and Transverse (Flags) Frame37-6330 1 Set of 4 Roller Bearers, BS188137-6360 1 Upper Bearer and pair of self aligning Lower Steel

Bearers

Buyer’s GuideCement Testing: Sets 38015 to 38175

12

Set 38015 Specific surface (fineness), BS 4359-2,BS 6463-4 The Constant Volume Method ofRigden

38-0500 1 Rigdens Flow Meter38-0600 1 Permeability Cell81-0518 1 Timer Clock38-0620 1 Dibutylphthalate 500 ml38-0640 1 NBS - SRM Reference Cement, EN196-638-0630 1 Filter Paper, equivalent to Whatman No 74

Set 38025 Air permeability (fineness), EN 196-6,BS 4359-2, ASTM C204, AASHTO T153

38-1000 1 Blaine Air Permeability Apparatus81-0518 1 Timer Clock38-0640 1 NBS - SRM Reference Cement, EN196-638-0650 1 Filter Paper, equivalent to Whatman No 4038-0620 1 Dibutylphthalate 500 mlAlso required, but not part of the basic set:Set 38025/AR Also required products set

1 78-5405/01 Electronic Top Loading Balance1 23-7770/18 2 oz. Sample Bottles pack of 121 82-5315 Max-MinThermometer, double scale

Set 38035/1 Determination of density of cement,BS 4550-3

24-2900 6 50 ml Density Bottle With perforated stopper81-0180 1 Chattaway Spatula 125 mm81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall,82-2170 1 Vacuum Desiccator 250 mm internal diameter82-2180 1 Safety Cage for Desiccator82-7091 1 Silica Gel, 6 – 16 mesh quantity 500g82-7700 1 Filter Pump82-2260 1 Glass Funnel 110 mm dia.82-8500/01 1 14 litre Water Bath with Digital ControllerAlso required, but not part of the basic set:Set 38035/1/AR Also required product set

1 78-5405/01 Electronic Top Loading Balance

Set 38045 Specific gravity of hydraulic cement,ASTM C188

38-1200 3 Le Chatelier Flask81-0180 1 Chattaway Spatula 125 mmAlso required, but not part of the basic set:Set 38045/AR Also required products set

1 78-5405/01 Electronic Top Loading Balance1 82-8500/01 14 litre Water Bath

Set 38055 Coarse material in hydrated lime and limeputty, BS 6463-4

38-1441 1 Sintered Glass Filter Crucible Apparatus79-0020 1 200 mm dia Receiver79-0090 1 200 mm dia BS Sieve 90 µm stainless steel mesh79-0130 1 200 mm dia BS Sieve 180 µm stainless steel mesh81-0021 1 Single Funnel Stand81-0373 4 Red Rubber Tubing H5.0 mm bore 4.0 mm wall81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall82-2260 2 Glass Funnel 110 mm dia.82-2340 2 Filter Flask 1000 ml82-2500 1 Wash Bottle Polythene 500 ml82-3091 1 500 ml Bottle with stopper82-7700 1 Filter PumpAlso required, but not part of the basic set:Set 38055/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5335/01 Analytical Electronic Balance

Set 38065 Consistence and setting-time, EN 196-338-2010 1 Vicat Frame complete38-2110 1 BS/EN Initial Needle 1.13 mm dia38-2150 1 BS/EN Final Needle 1.13 mm dia38-2300 1 Vicat Mould to EN 196 Part 381-0335 2 Trowel, gauging to BS 4550Also required, but not part of the basic set:Set 38065/AR Also required products set

1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 24-0430 Glass Plate

Set 38085 Consistence and setting time,ASTM C187, C191

38-2010 1 Vicat Frame complete.38-2620 1 ASTM Initial Needle 1 mm dia.38-2660 1 ASTM Vicat Mould.Also required, but not part of the basic set:Set 25075/AR

Set 38095 Time of setting of hydraulic cement byGillmore needles,ASTM C266, AASHTO T154

38-2690 1 Gillmore Apparatus38-7060 1 Glass Plate 100 mm sq.Also required, but not part of the basic set:Set 25075/AR

Set 38100 Consistency of fresh mortar and masonrycement, EN 413, 459; DIN 4211

38-2700 1 Plunger Penetration Apparatus38-2701 1 Test Cup, 80 mm dia by 70 mm deep38-2702 1 Tamper, 40 mm dia tamping face, weight 250 gAlso required, but not part of the basic set:Set 38100/AR Also required product set

1 39-0031/01 Automatic/Manual Mortar Mixer

Set 38125/1 General expansion test for dry hydratedlime, BS 6463-4

38-3005 3 Le Chatelier Mould38-3200 1 Extensibility of Mould Apparatus38-3260/01 1 Steam Tank38-3300 1 Tamping Rod 17 mm diaAlso required, but not part of the basic set:Set 38125/1/AR Also required products set

1 81-0335 Trowel, gauging to BS 45501 82-7451 Standard Sand 850/600 µm, (50 kg)

Set 38135/1 Soundness of cement paste, EN 196-338-3005 3 Le Chatelier Mould38-3205 1 Extensibility of Mould Apparatus38-3410/01 1 Le Chatelier Water BathAlso required, but not part of the basic set:Set 38135/1/AR Also required products set

1 81-0335 Trowel, gauging to BS 45501 24-0430 Glass Plate

Set 38145/1 Expansion of Portland cement,ASTM C151, AASHTO T107

34-8505 1 Drying, Shrinkage and Moisture MovementApparatus

34-8544 2 Two Gang Prism Mould34-8547 5 Inserts for EL34-8544 (Pack of 10)38-3800/01 1 Autoclave82-0420 2 Measuring Cylinder 250 x 2 ml soda glass, spouted81-0335 1 Trowel, gauging to BS 4550Also required, but not part of the basic set:Set 38145/1/AR Also required products set

1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-4200/01 Moisture Conditioning Oven

Set 38155/1 Pat test for soundness of hydrated lime andgypsum building plasters,BS 890, 1191-1

38-3260/01 1 Steam Tank38-4200 3 Brass Ring Mould81-0140 1 Spatula, 200 mm blade81-0335 2 Trowel, gauging to BS 455024-0430 1 Glass PlateAlso required, but not part of the basic set:Set 24075/AR

Set 38175 Expansion of gypsum plasters, BS 1191-138-4405 1 Plaster Extensometer81-0140 1 Spatula 200 mm blade

Cement Testing Sets

Buyer’s GuideCement Testing: Sets 38195/1 to 39015/1

13

Set 38195/1 Heat of hydration of Portland cement,BS 4550-3

23-3505 1 Mortar and Pestle, porcelain23-3710/01 1 Melting Pot 2.3 litre capacity38-4600/01 1 Heat of Hydration Apparatus79-0020 1 200 mm dia Receiver79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh79-0220 1 200 mm dia BS Sieve 850 µm stainless steel mesh81-0100 1 Spatula, 100 mm blade81-0518 1 Timer Clock82-1540 5 Weighing Bottle82-2100 1 Non-Vacuum Desiccator82-7031 1 Paraffin Wax in 5 kg block82-7091 1 Silica Gel, 6–16 mesh quantity 500g79-7210 1 Sieve Brush double-ended nylon.Also required, but not part of the basic set:Set 38195/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre Capacity1 78-5335/01 Analytical Electronic Balance1 83-4160/01 1000°C Muffle Furnace

Set 38215/1 Heat of hydration of cement, ASTM C18623-3505 1 Mortar and Pestle, porcelain23-3710/01 1 Melting Pot 2.3 litre capacity38-4600/01 1 Heat of Hydration Apparatus24-4130/01 1 High Speed Stirrer79-5120 1 8 dia ASTM Sieve 850 µm stainless steel mesh79-5220 1 8 dia ASTM Sieve 150 µm stainless steel mesh79-5410 1 8 dia Receiver81-0100 1 Spatula, 100 mm blade81-0518 1 Timer Clock82-1540 5 Weighing Bottle82-2100 1 Non-Vacuum Desiccator82-7031 1 Paraffin Wax in 5 kg block82-7091 1 Silica Gel, 6–16 mesh quantity 500 g79-7210 1 Sieve Brush, double-ended nylonAlso required, but not part of the basic set:Set 38195/1/AR

Set 38235 Consistence of mortars, dropping ballmethod, BS 4551-1 and 6463-4

38-5000 1 Dropping Ball Apparatus38-5005 2 Brass Mould 100 mm dia x 25 mm.38-5200 1 Ball Penetration Measuring Apparatus81-0335 1 Trowel, gauging to BS 4550

Set 38245 Consistence retentivity and waterretentivity, BS 4551-1 and 6463-4

38-5005 1 Brass Mould 100 mm dia x 25 mm38-5500 1 2 kg Iron Weight38-5520 1 Non Porous Plate 110 mm dia.38-5540 5 White Cotton Gauze, 1m square.81-0140 1 Spatula, 200 mm blade

Set 38265/1 Flow of mortars and hydraulic cement,BS 4551, ASTM C230

38-6000 1 BS/ASTM Flow Table Top38-6020 1 Tripod for Flow Table38-6040 1 BS/ASTM Flow Mould38-6060 1 Baseplate for Flow Table38-6080 1 Callipers38-6100/01 1 Motor Unit for use with EL38-602038-6160 1 Plastic Tamper

Set 38275 Flow of building limes, BS 6463-438-6020 1 Tripod for Flow Table38-6060 1 Baseplate for Flow Table38-6200 1 Flow Table Top to BS 646338-6220 1 Mould to BS 6463 Part 4

Set 38295 Air content of freshly- mixed mortars,density method, BS 4551-1

38-7000 1 Brass Measure 500 ml BS 455138-7060 1 Glass Plate 100 mm sq38-7080 1 Hard Plastic Tamper38-7120 1 Straight Edge81-0140 1 Spatula, 200 mm bladeAlso required, but not part of the basic set:Set 38295/AR Also required products set

1 78-7140 Triple Beam Balance 2610g x 0.1g1 39-0031/01 Automatic / Manual Mortar Mixer

Set 38305/1 Air content of hydraulic cement mortar,ASTM C185

29-5000 1 Density Spoon38-6000 1 BS/ASTM Flow Table Top38-6020 1 Tripod for Flow Table38-6040 1 BS/ASTM Flow Mould38-6060 1 Baseplate for Flow Table38-6080 1 Callipers38-6100/01 1 Motor Unit for use with EL38-602038-6160 1 Plastic Tamper38-7100 1 Brass Measure 400 ml ASTM C18538-7120 1 Straight Edge79-5120 1 8 inch dia ASTM Sieve 850 µm stainless steel mesh79-5140 1 8 inch dia ASTM Sieve 600 µm stainless steel mesh79-5410 1 8 inch dia Receiver82-0420 1 Measuring Cylinder 250 x 2 ml soda glass, spouted81-0140 1 Spatula, 200 mm bladeAlso required, but not part of the basic set:Set 38305/1/AR Also required products set

1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 82-7451 Standard Sand 850/600 µm, (50 kg)

Set 38340/1 Determination of moisture content,BS 3892-1

81-0100 1 Spatula, 100 mm blade81-2979 10 Unnumbered Moisture Content Tin 90g capacity.82-2100 1 Non-Vacuum Desiccator 200 mm internal diameter82-7091 1 Silica Gel, 6–16 mesh, quantity 500g78-1215/01 1 Drying Oven 50 litre capacityAlso required, but not part of the basic set:Set 38035/1/AR

Set 38350/1 Determination of water requirement,BS 3892-1

39-0031/01 1 Automatic / Manual Mortar Mixer 5 litre capacity39-0065 1 Scraper, pack of 539-1170 3 Standard Sand, graded pack for mortar prismsAlso required, but not part of the basic set:Set 25075/ARSet 38265/1

Set 38360 Fineness of fly ash (PFA) by wet sieving,EN 451; ASTM C115, C430

38-7600 1 Spray Nozzle Apparatus38-7600/11 1 Pressure Gauge 160 kPa x 5 kPa38-7600/12 1 45 µm Sieve, stainless steel mesh 50 mm i.d.

Set 38370/1 Determination of pozzolanic activity indexEN 450; BS 3892-1

39-0031/01 1 Automatic/Manual Mortar Mixer 5 litre capacity39-0065 1 Scraper, pack of 539-1100 2 Three Gang Mould for 40.1 x 40 x 160 mm prisms39-1120 1 Feeding Hopper39-1130 1 Scraper39-1150/01 1 Jolting Table39-1170 3 Standard Sand, graded pack for Mortar Prisms39-6150/01 1 ADR-Auto 250 Compression Machine39-5600 1 Compression Frame Jig Assembly without platens39-5600/10 1 40 mm Square Platen SetAlso required, but not part of the basic set:Set 25075/AR

Set 39015/1 Preparation of 70.7 mm mortar cubes,BS 4550-3

34-6755/01 1 Small Curing Tank39-0100 6 70.7 mm Cube Mould39-0200/01 1 Vibrating Machine for 70.7 mm cube moulds81-0335 2 Trowel, gauging to BS 455081-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)82-7451 1 Standard Sand 850/600 µm, (50 kg)

Buyer’s GuideCement and Aggregate Testing: Sets 39025/1 to 42065

14

Set 39025/1 Preparation of 100 mm concrete cubes,BS 1881-131

34-2910 1 Compacting Bar 25 mm sq x 380 mm34-4520 6 100 mm Cube Mould34-6755/01 1 Small Curing Tank81-0335 1 Trowel, gauging to BS 455081-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)

Set 39035/1 Preparation and testing of 50 mm hydrauliccement mortar cubes, ASTM C109

36-0716/01 1 ADR 1500 Compression Machine37-5000 1 Standard Distance Piece 50 mm effective height37-5020 1 Standard Distance Piece 60 mm effective height39-5600 1 Compression Frame Jig Assembly without platens39-5600/12 1 50 mm Square Platen Set38-6160 1 Plastic Tamper39-0410 2 Three Gang Mould for 50 mm Mortar Cubes.79-5100 1 8 inch dia ASTM Sieve 1.18 mm stainless steel mesh79-5140 1 8 inch dia ASTM Sieve 600 µm stainless steel mesh79-5160 1 8 inch dia ASTM Sieve 425 µm stainless steel mesh79-5180 1 8 inch dia ASTM Sieve 300 µm stainless steel mesh79-5220 1 8 inch dia ASTM Sieve 150 µm stainless steel mesh82-0420 1 Measuring Cylinder 250 x 2 ml soda glass, spouted82-0460 1 Measuring cylinder 500 x 5 ml soda glass, spouted81-0335 1 Trowel, gauging to BS 4550Also required, but not part of the basic set:Set 25075/ARSet 38265/1

Set 39045/1 Preparation and testing of 40 x 40 x 160 mmmortar prisms, EN 196-1, 413-2 and 459-2,BS 3892

39-0031/01 1 Automatic/Manual Mortar Mixer 5 litre capacity39-0051/01 1 Automatic Sand Dispenser39-0031/12 1 Water Dispenser, 225 ml39-1100 3 Three Gang Mould for 40.1 x 40 x 160 mm prisms39-1120 1 Feeding Hopper39-1130 1 Scraper39-1150/01 1 Jolting Table to EN196-181-0705 1 Wire Brush82-7341 1 Mould Oil (25 litre drum)39-1170 3 Standard Sand, graded pack for Mortar Prisms39-6150/01 1 ADR-Auto 250 Compression Machine39-5600 1 Compression Frame Jig Assembly without platens39-5600/10 1 40 mm Square Platen SetAlso required, but not part of the basic set:Set 39045/1/AR Also required products set

1 39-1300/01 Humidity Cabinet1 34-6755/01 Small Curing Tank1 79-0085 200 mm dia ISO Sieve 80 µm mesh1 79-0125 200 mm dia ISO Sieve 160 µm mesh1 79-0190 200 mm dia BS Sieve 500 µm mesh1 79-0300 200 mm dia BS Sieve 3.35 mm mesh1 79-0255 200 mm dia ISO Sieve 1.60 mm mesh1 79-0270 200 mm dia BS Sieve 2.00 mm mesh

Set 39105/1 Compression testing 70.7 mm mortar cubesand 100 mm concrete cubes, BS 4550-3

36-0716/01 1 ADR 1500 Compression Machine37-5020 1 Standard Distance Piece 60 mm effective height37-5100 2 Standard Distance Piece 100 mm effective height

Set 39115/1 Preparation and tensile testing of cementbriquettes, ASTM C190

39-7100/01 1 10 kN Flexural/Tensile Testing Machine39-7100/15 1 Tensile Jaws39-1000 6 Briquette Mould, complete with Steel BaseplateAlso required, but not part of the basic set:Set 39115/1/AR Also required products set

1 78-4200/01 Moisture Conditioning Oven1 82-7451 Standard Sand 850/600 µm, (50 kg)

Set 42015 Sampling and preparation23-3200 1 Riffle Box, 38 mm slot width23-3350 1 Riffle Box, 64 mm slot width81-0220 1 Aluminium Scoop, large81-0240 1 Shovel, flat81-3060 10 Sample Container, 10 litre capacity81-4765 100 Polythene Bag 254 mm x 380 mm81-4775 100 Polythene bag 450 mm x 1m x 1000 G81-4160 1 Sample Tray 910 x 910 x 76 mm

Set 42025/1 Determination of moisture content,definitive (oven-drying) method, BS 812

78-0110/01 1 Soils Drying Oven 225 litre capacity22-0200 1 Dial Thermometer, 0 – 200°C81-0222 1 Scoop, Stainless Steel81-3040 10 Sample Container. 2.5 litre capacityAlso required, but not part of the basic set:Set 42025/1/AR Also required products set

1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7500 25 kg x 1g Field and Laboratory Scale

Set 42035/1 Determination of moisture content,modified drying method, high temperature,BS 812

78-3101/01 1 Hotplate81-0140 1 Spatula, 200 mm blade81-4700 1 Stainless Steel Tray, 305 mm diaAlso required, but not part of the basic set:Set 42035/1/AR Also required products set

1 78-7250 5 kg x 0.5 Field and Laboratory Scale1 78-7510 Carrying Case

Set 42045/1 Determination of moisture content,modified drying method, microwave oven,BS 812

78-2155/01 1 Microwave Oven81-0222 1 Scoop, Stainless SteelAlso required, but not part of the basic set:Set 25075/AR

Set 42065 Determination of particle size distribution,BS 812-103; EN 933-1

79-0010 1 200 mm dia Lid79-0020 1 200 mm dia Receiver79-0080 1 200 mm dia BS Sieve 75 µm stainless steel mesh79-0120 1 200 mm dia BS Sieve 150 µm stainless steel mesh79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh79-0160 1 200 mm dia BS Sieve 300 µm stainless steel mesh79-0180 1 200 mm dia BS Sieve 425 µm stainless steel mesh79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh79-0220 1 200 mm dia BS Sieve 850 µm stainless steel mesh79-0240 1 200 mm dia BS Sieve 1.18 mm stainless steel mesh79-0260 1 200 mm dia BS Sieve 1.70 mm stainless steel mesh79-0280 1 200 mm dia BS Sieve 2.36 mm stainless steel mesh.79-0300 1 200 mm dia BS Sieve 3.35 mm stainless steel mesh79-1515 1 200 mm dia BS Sieve 5.00 mm perforated plate79-1525 1 200 mm dia BS Sieve 6.30 mm perforated plate79-1555 1 200 mm dia BS Sieve 10.0 mm perforated plate79-1575 1 200 mm dia BS Sieve 14.0 mm perforated plate79-1595 1 200 mm dia BS Sieve 20.0 mm perforated plate79-1615 1 200 mm dia BS Sieve 28.0 mm perforated plate79-2010 1 300 mm dia Lid79-2020 1 300 mm dia Receiver79-2640 1 300 mm dia BS Sieve 37.5 mm perforated plate79-2670 1 300 mm dia BS Sieve 63.0 mm perforated plate79-2680 1 300 mm dia BS Sieve 75.0 mm perforated plate79-7210 3 Sieve Brush double-ended nylon79-2655 1 300 mm dia BS Sieve 50.0 mm perforated plateAlso required, but not part of the basic set:Set 42065/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5335/01 Analytical Electronic Balance1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7500 25 kg x 1g Field and Laboratory Scale1 80-0350/01 Sieve Shaker EFL2000/21 81-4030 Oven Tray 406 mm sq, 50 mm deep

Aggregate Testing Sets

Buyer’s GuideAggregate Testing: Sets 42075 to 42195/1

15

Set 42075 Sieve analysis,ASTM C33, C136, AASHTO T27

79-5020 1 8 in. dia ASTM Sieve 4.75 mm stainless steel mesh79-5060 1 8 in. dia ASTM Sieve 2.36 mm stainless steel mesh79-5100 1 8 in. dia ASTM Sieve 1.18 mm stainless steel mesh79-5140 1 8 in. dia ASTM Sieve 600 µm stainless steel mesh79-5180 1 8 in. dia ASTM Sieve 300 µm stainless steel mesh79-5220 1 8 in. dia ASTM Sieve 150 µm stainless steel mesh79-5260 1 8 in. dia ASTM Sieve 75 µm stainless steel mesh79-5400 1 8 in. dia Lid79-5410 1 8 in. dia Receiver79-5510 1 8 in. dia ASTM Sieve 9.50 mm stainless steel mesh79-5530 1 8 in. dia ASTM Sieve 12.5 mm stainless steel mesh79-5560 1 8 in. dia ASTM Sieve 19.0 mm stainless steel mesh79-6150 1 12 in. dia Lid ASTM79-6160 1 12 in. dia Receiver ASTM79-6280 1 12 in. dia ASTM Sieve 25.0 mm stainless steel mesh79-6310 1 12 in. dia ASTM Sieve 37.5 mm stainless steel mesh79-6330 1 12 in. dia ASTM Sieve 50.0 mm stainless steel mesh79-6350 1 12 in. dia ASTM Sieve 63.0 mm stainless steel mesh79-6360 1 12 in. dia ASTM Sieve 75.0 mm stainless steel mesh79-7210 1 Sieve Brush double-ended NylonAlso required, but not part of the basic set:Set 29065/AR

Set 42085 Materials finer than 75 µm sieve inmineral aggregate by washing,ASTM C117, AASHTO T11

45-2040 1 7000 ml Steel Bottle with Stopper No. 7179-5100 1 8 in. dia ASTM Sieve 1.18 mm stainless steel mesh79-5260 1 8 in. dia ASTM Sieve 75 µm stainless steel mesh79-5400 1 8 in. dia Lid79-5410 1 8 in. dia Receiver81-4020 1 Sample Tray 306 x 306 x 38 mmAlso required, but not part of the basic set:Set 29065/AR

Set 42105 Determination of flakiness and elongation,BS 812

42-0410 1 Flakiness Gauge42-0670 1 Flakiness Sieve 4.9 mm wide slot42-0680 1 Flakiness Sieve 7.2 mm wide slot42-0700 1 Flakiness Sieve 10.2 mm wide slot42-0710 1 Flakiness Sieve 14.4 mm wide slot42-0720 1 Flakiness Sieve 19.7 mm wide slot42-0730 1 Flakiness Sieve 26.3 mm wide slot42-0740 1 Flakiness Sieve 33.9 mm wide slot42-0820 1 Length GaugeAlso required, but not part of the basic set:Set 42105/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 81-4030 Oven Tray 406 mm sq, 50 mm deep.1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7350 10 kg x 1g Field and Laboratory Scale

Set 42110 Determination of flakiness,EN 933-6;AFNOR P18-561

42-0752 1 Grid Sieve, 31.5 mm slot width42-0754 1 Grid Sieve, 25 mm slot width42-0756 1 Grid Sieve, 20 mm slot width42-0758 1 Grid Sieve, 16 mm slot width42-0760 1 Grid Sieve, 12.5 mm slot width42-0762 1 Grid Sieve, 10 mm slot width42-0764 1 Grid Sieve, 8 mm slot width42-0766 1 Grid Sieve, 6.3 mm slot width42-0768 1 Grid Sieve, 5 mm slot width42-0770 1 Grid Sieve, 4 mm slot width42-0772 1 Grid Sieve, 3.15 mm slot width,42-0774 1 Grid Sieve, 2.5 mm slot widthAlso required, but not part of the basic set:Set 42110/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5456/01 Electronic Top Loading Balance

Set 42115 Determination of the shape index ofaggregate

81-0588 1 Vernier Calliper, range 0 to 200 mm x 0.02 mm42-0821 1 3.1 Shape Index Calliper81-4020 1 Sample Tray 306 x 306 x 38 mm

Set 42155/1 Particle density and water absorption ofaggregate between 63 mm and 5 mm,BS 812

42-1000/01 1 6 kg x 0.1g Buoyancy Balance81-3060 1 Sample Container. 10 litre capacity81-4020 1 Sample Tray 306 x 306 x 38 mm42-1005 1 Wire Basket, brass with handleAlso required, but not part of the basic set:Set 42155/1/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 23-3350 Riffle Box, 64 mm slot width1 79-0010 200 mm dia Lid1 79-0020 200 mm dia Receiver1 79-1515 200 mm dia BS Sieve 5.00 mm perf. plate1 79-1555 200 mm dia BS Sieve 10.0 mm perf. plate1 79-1595 200 mm dia BS Sieve 20.0 mm perf. plate1 79-1640 200 mm dia BS Sieve 37.5 mm perf. plate1 79-1655 200 mm dia BS Sieve 50.0 mm perf. plate1 79-1670 200 mm dia BS Sieve 63.0 mm perf. plate1 82-5010 Thermometer –10 to +50 x 0.5°C

Set 42165/1 Specific gravity and absorption of coarseaggregate, ASTM C127

42-1000/01 1 6 kg x 0.1g Buoyancy Balance79-5020 1 8 in. dia ASTM Sieve 4.75 mm stainless steel mesh81-4020 1 Sample Tray 306 x 306 x 38 mm42-1005 1 Wire Basket

Set 42175/1 Particle density and water absorption ofaggregate 20 mm and smaller (gas jarmethod), BS 812

78-2450/01 1 Warm Air Drying Unit78-5475/01 1 Electronic Top Loading Balance 10000 x 0.5g24-2830 2 Gas Jar 75 mm dia x 300 mm42-1720 1 Tamping Rod81-4700 2 Stainless Steel Tray 305 mm diaAlso required, but not part of the basic set:Set 42175/1/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 23-3170 Riffle Box, 30 mm slot width1 42-1700 Sand Absorption Cone1 79-0010 200 mm dia Lid1 79-0020 200 mm dia Receiver1 79-0080 200 mm dia BS Sieve 75 µm mesh1 79-0240 200 mm dia BS Sieve 1.18 mm mesh1 79-1515 200 mm dia BS Sieve 5.00 mm perf. plate1 79-1555 200 mm dia BS Sieve 10.0 mm perf. plate1 79-1595 200 mm dia BS Sieve 20.0 mm perf. plate1 82-5010 Thermometer –10 to +50 x 0.5°C

Set 42185 Specific gravity and absorption of fineaggregates, ASTM C128, AASHTO T84

24-2885 1 Pyknometer42-1700 1 Sand Absorption Cone42-1720 1 Tamping Rod81-4020 1 Sample Tray 306 x 306 x 38 mmAlso required, but not part of the basic set:Set 42185/AR Also required products set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-2450/01 Warm Air Drying Unit1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop

Set 42195/1 Particle density of fillers, BS 81224-2900 6 50 ml Density Bottle81-0180 1 Chattaway Spatula81-0375 2 Red Rubber Tubing H6.5 mm bore 5.0 mm wall82-2170 1 Vacuum Desiccator82-2180 1 Safety Cage for Desiccator82-2260 1 Glass Funnel 110 mm dia82-7091 1 Silica Gel, 6–16 mesh quantity 500 g82-7700 1 Filter Pump82-8500/01 1 14 litre Water Bath with Digital ControllerAlso required, but not part of the basic set:Set 38035/1/AR

Buyer’s GuideAggregate Testing: Sets 42215 to 42305/1

16

Set 42215 Determination of bulk density of aggregates,BS 812

34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-2800 1 Bulk Density Measure, 30 dm3 capacity34-2820 1 Bulk Density Measure, 15 dm3 capacity42-1995 1 Bulk Density Measure 3 litre42-2000 1 Bulk Density Measure, 7 dm3

Also required, but not part of the basic set:A scale or balance accurate to 0.2% of the weight of the material to beweighed (this will vary according to the size of container used)

Set 42225 Determination of the unit weight ofaggregate, ASTM C29

34-0130 1 Tamping Rod 16 mm dia x 600 mm long34-2850 1 Bulk density measure 1/10 ft3

34-2852 1 Bulk density measure 1/3 ft3

38-2854 1 Bulk density measure 1/2 ft3

34-2856 1 Bulk density measure 1ft3

Also required, but not part of the basic set:Set 34140/ARA scale or balance accurate to 0.1% of the weight of the material to beweighed (this will vary according to the size of container used)

Set 42235 Bulk density of filler in kerosene, BS 81282-0380 2 Measuring Cylinder 100 ml82-2100 1 Non-Vacuum Desiccator82-7091 1 Silica Gel, 6–16 mesh quantity 500 gAlso required, but not part of the basic set:Set 24125/AR

Set 42245 Determination of chloride content, BS 81279-2010 1 300 mm dia Lid79-2020 1 300 mm dia Receiver79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate81-0094 1 Support Assembly82-0460 1 Measuring Cylinder 500 x 5 ml soda glass, spouted82-1060 2 Volumetric Flask 1000 ml capacity with stopper82-1140 4 Conical Flask 250 ml capacity wide mouthed82-1260 1 25 ml Graduated Pipette82-1440 2 Burette 50 ml (Class B) with single bore stopcock82-2260 1 Glass Funnel 110 mm dia82-2500 1 Wash Bottle Polythene 500 ml82-3060 1 Reagent Bottle, 1000 ml capacity82-3149 2 Polythene Bottle, 5 litre82-7901 1 Filter Paper No 74, equivalent to Whatman No 40,82-7926 1 Filter Paper No 94, equivalent to Whatman No 44,82-0380 1 Measuring Cylinder 100 ml82-1300 1 Bulb Pipette 50 ml capacityAlso required, but not part of the basic set:Set 42245/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5335/01 Analytical Electronic Balance1 78-7350 10 kg x 1g Field and Laboratory Scale1 81-4020 Sample Tray 306 x 306 x 38 mm

Chemicals required: Ammonium Ferric Sulphate; Potassium Thiocyanate;3,5,5 Trimethylhexanol. Recommend local purchase.

Set 42265/1 Determination of total sulphate content byacid extraction (method B), BS 812

78-3101/01 1 Hotplate82-0200 2 Glass Beaker 600 ml squat form with spout82-2260 1 Glass Funnel 110 mm dia82-7901 1 Filter Paper No 74 equivalent to Whatman No 40,82-7926 1 Filter Paper No 94, equivalent to Whatman No 44,Also required, but not part of the basic set:Set 42265/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-5335/01 Analytical Electronic Balance1 23-3505 Mortar and Pestle, porcelain1 83-4160/01 1000°C Muffle Furnace1 79-0120 200 mm dia BS Sieve 150 µm mesh1 79-0230 200 mm dia BS Sieve 1.00 mm mesh1 79-1515 200 mm dia BS Sieve 5.00 mm perf. plate1 79-1595 200 mm dia BS Sieve 20.0 mm perf. plate1 82-3300 Silica Crucible

Set 42275 Acid soluble material in fine aggregates,BS 812-119

23-3050 1 Riffle Box, 13 mm slot width79-0010 1 200 mm dia Lid79-0020 1 200 mm dia Receiver79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh79-1515 1 200 mm dia BS Sieve 5.00 mm perforated plate82-2000 2 Evaporating Dish 150 mm dia x 45 mm depth82-2100 1 Non-Vacuum Desiccator 200 mm internal diameter82-2200 2 Buchner Funnel No. 582-2500 2 Wash Bottle Polythene 500 ml82-7091 1 Silica Gel, 6 – 16 mesh quantity 500g82-7901 1 Filter Paper No 74 equivalent to Whatman No 4082-0380 1 Measuring Cylinder 100 ml82-2340 1 Filter Flask 1000 mlAlso required, but not part of the basic set:Set 42275/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-2950/01 Hotplate, 200 mm dia

Set 42278 Testing and Classifying drying shrinkage ofaggregates in concrete, BS 812-120

34-8500 1 Drying Shrinkage and Moisture Movement Apparatus34-8509 1 BS Length Comparator 205 mm long34-8541 1 Steel inserts for EL34-8538 (Pack of 10)42-2970 1 Three-Gang Prism Mould, prisms 200x50x50 mm

Set 42285 Detection of organic impurities in sands forconcrete, ASTM C40

42-3000 3 Glass Bottle approx. 300 ml42-3040 1 Colour Standard to ASTM C4082-3060 1 Reagent Bottle, 1000 ml capacity82-7141 1 Sodium Hydroxide Pellets 500 g

Set 42295/1 The effect of organic impurities in fineaggregates on strength of mortar,ASTM C87, AASHTO T71

37-5000 1 Standard Distance Piece 50 mm effective height37-5020 1 Standard Distance Piece 60 mm effective height39-5600 1 Compression Frame Jig Assembly39-5600/12 1 50 mm Square Platen Set38-6000 1 BS/ASTM Flow Table Top38-6020 1 Tripod for Flow Table38-6040 1 BS/ASTM Flow Mould.38-6060 1 Baseplate for Flow Table38-6080 1 Callipers38-6100/01 1 Motor Unit for use with EL38-602038-6160 1 Plastic Tamper39-0410 6 Three Gang Mould for 50 mm Mortar Cubes36-0691/01 1 Compact 1500 Standard Compression Machine81-0335 1 Trowel, gauging to BS 4550

Set 42305/1 Soundness of aggregates in sodium sulphateor magnesium sulphate,ASTM C88, AASHTO T104

82-3505 1 Hydrometer, 1.150 – 1.200 relative density82-3510 1 Hydrometer, 1.250 – 1.300 relative density79-5030 1 8 in. dia ASTM Sieve 4.00 mm stainless steel mesh79-5500 1 8 in. dia ASTM Sieve 8.00 mm stainless steel mesh79-5550 1 8 in. dia ASTM Sieve 16.0 mm stainless steel mesh79-5600 1 8 in. dia ASTM Sieve 31.5 mm stainless steel mesh42-1005 1 Wire Basket nominal 6000 cm capacity81-4821 1 Wire Basket BS812 type 2.82-8700/01 1 Water Bath 48 litres capacityAlso required, but not part of the basic set:Set 42305/1/AR Also required product set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 81-4030 Oven Tray1 78-7090 Harvard Trip Balance 2000 g1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7350 10 kg x 1g Field and Laboratory Scale1 79-5020 8 in. dia ASTM Sieve 4.75 mm mesh1 79-5060 8 in. dia ASTM Sieve 2.36 mm mesh1 79-5100 8 in. dia ASTM Sieve 1.18 mm mesh1 79-5140 8 in. dia ASTM Sieve 600 µm mesh1 79-5180 8 in. dia ASTM Sieve 300 µm mesh1 79-5220 8 in. dia ASTM Sieve 150 µm mesh1 79-5400 8 in. inch dia Lid1 79-5410 8 in. dia Receiver1 79-5530 8 in. dia ASTM Sieve 12.5 mm mesh1 79-5560 8 in. dia ASTM Sieve 19.0 mm mesh1 79-5570 8 in. dia ASTM Sieve 22.4 mm mesh1 79-5580 8 in. dia ASTM Sieve 25.0 mm mesh1 79-5610 8 in. dia ASTM Sieve 37.5 mm mesh1 79-5630 8 in. dia ASTM Sieve 50.0 mm mesh1 79-5650 8 in. dia ASTM Sieve 63.0 mm mesh

Buyer’s GuideAggregate and Asphalt Testing: Sets 42310 to 45095/1

17

Set 42310 Soundness of Aggregates (In MagnesiumSulphate) BS 812-121

81-4825 2 Wire Basket BS812 type 482-2110 1 Desiccator Cabinet Non-vacuum81-3540 2 Plastic Container, 10 litre82-3500 1 Hydrometer, 1.250-1.300 g/ml82-6971 3 Magnesium Sulphate 2.5 kg82-7091 2 Silica Gel 6 – 16 mesh 500 gAlso required, but not part of the basic set:Set 42310/AR Also required product set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 82-8700/01 Water Bath 48 litre

Set 42335/1 Aggregate abrasion value using Los Angelesabrasion machine,ASTM C131, C535, AASHTO T96

78-0110/01 1 Soils Drying Oven 225 litre capacity42-5305/01 1 Los Angeles Abrasion Machine42-5300/10 1 Set of 12 Abrasive Charges79-5000 1 8 in. dia ASTM Sieve 6.30 mm stainless steel mesh79-5020 1 8 in. dia ASTM Sieve 4.75 mm stainless steel mesh79-5060 1 8 in. dia ASTM Sieve 2.36 mm stainless steel mesh79-5080 1 8 in. dia ASTM Sieve 1.70 mm stainless steel mesh79-5400 1 8 in. dia Lid79-5410 1 8 in. dia Receiver79-5510 1 8 in. dia ASTM Sieve 9.50 mm stainless steel mesh79-5530 1 8 in. dia ASTM Sieve 12.5 mm stainless steel mesh79-5560 1 8 in. dia ASTM Sieve 19.0 mm stainless steel mesh79-5610 1 8 in. dia ASTM Sieve 37.5 mm stainless steel mesh79-6150 1 12 in. dia Lid ASTM79-6160 1 12 in. dia Receiver ASTM79-6280 1 12 in. dia ASTM Sieve 25.0 mm stainless steel mesh79-6330 1 12 in. dia ASTM Sieve 50.0 mm stainless steel mesh79-6350 1 12 in. dia ASTM Sieve 63.0 mm stainless steel mesh79-6360 1 12 in. dia ASTM Sieve 75.0 mm stainless steel mesh78-5525/01 1 Electronic Top Pan Balance 30000 x 1 g

Set 42345/1 Polished stone value, BS 81242-0680 1 Flakiness Sieve 7.2 mm wide slot42-5505/01 1 Accelerated Polishing Machine42-5520 8 Corn Emery ungraded pack 3 kg42-5525 16 Flour Emery ungraded 3 kg packAlso required, but not part of the basic set:Set 42345/1/AR Also required product set

1 78-0110/01 Soils Drying Oven 225 litre capacity1 79-0010 200 mm dia Lid1 79-0020 200 mm dia Receiver1 79-0060 200 mm dia BS Sieve 53 µm mesh1 79-0140 200 mm dia BS Sieve 212 µm mesh1 79-0160 200 mm dia BS Sieve 300 µm mesh1 79-0170 200 mm dia BS Sieve 355 µm mesh1 79-0180 200 mm dia BS Sieve 425 µm mesh1 79-0190 200 mm dia BS Sieve 500 µm mesh1 79-0200 200 mm dia BS Sieve 600 µm mesh1 79-1555 200 mm dia BS Sieve 10.0 mm perf. plate1 80-0300/01 Sieve Shaker EFL2000/1

Set 42355

Set 42350/1 Determination of attrition by theMicro-Deval method

42-5200/01 1 Micro-Deval Apparatus

Set 42355 In-situ surface frictional properties,ASTM E303

42-6000 1 Friction Tester42-6200 1 Baseplate with Specimen Mounting Block42-6220 1 Detachable Scale42-6221 6 Replacement Mounted Rubber Slider, for lab use42-6222 6 Replacement Mounted Rubber Slider for road

version of machine

Set 45065/1 Quantitive extraction of bitumen,centrifuge extractor, method A,ASTM D2172, AASHTO T164

78-2950/01 1 200 mm dia Hotplate45-3800/01 1 Rotatest 150082-0540 2 Measuring Cylinder 2000 x 20 ml with spout82-1970 1 Evaporating Dish 100 mm dia x 40 mm depth82-2100 1 Non-Vacuum Desiccator82-7091 1 Silica Gel, 6–16 mesh quantity 500 g81-4020 1 Sample Tray 306 x 306 x 38 mmAlso required, but not part of the basic set:Set 45065/1/AR Also required product set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5335/01 Analytical Electronic Balance1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7350 Field and Laboratory Scale1 83-4160/01 1000°C Muffle Furnace

The following chemicals are required:TrichloroethyleneRecommend local purchase

Set 45075/1 Quantitive extraction of bitumen, refluxextractor, method B, ASTM D2172

81-0430 1 Iron Wire Gauze with ceramic centre, pack of 1082-1970 1 Evaporating Dish 100 mm dia x 40 mm depth.45-3855/01 1 Reflux Extractor 4000g capacityAlso required, but not part of the basic set:Set 45075/1/AR Also required product set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-5335/01 Analytical Electronic Balance1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7350 Field and Laboratory Scale1 83-4160/01 1000°C Muffle Furnace1 82-2100 Non-Vacuum Desiccator

The following chemicals are required: Silica Gel,Trichloroethylene.Recommend local purchase

Set 45080/1 Determination of Binder Content by theIgnition MethodASTM D6307, BS DD250, AASHTO TP53-95

45-3900/01 1 ELE Asphalt Content Tester45-3900/10 1 Flexible Exhaust Tubing45-3900/21 2 Spare Basket AssemblyAlso required, but not part of the basic set:Set 45080/1/AR Also required products set

1 78-0120/01 Heavy Duty Oven1 78-5485/01 Electronic Top Loading Balance3 81-4030 Oven Tray3 81-5040 Bowl, 6 litre capacity2 81-0140 Spatula 200 mm blade2 81-0220 Aluminium Scoop, large1 81-0705 Wire Brush

Set 45095/1 Water content of asphalt, BS 598-278-2950/01 1 200 mm dia Hotplate45-3781 1 Hot Extractor Apparatus81-0094 1 Support Assembly82-7861 1 Filter Paper, equivalent to Whatman No 54The following chemicals are required:Trichloroethylene.Recommend local purchase

Asphalt Testing Sets

Buyer’s GuideAsphalt Testing: Sets 45135/1 to 46105/1

18

Set 45135/1 Resistance to plastic flow of bituminousmixtures (Marshall stability),ASTM D1559, AASHTO T245

78-0760 1 28 kN Clamped Boss Load Ring23-4200 1 Proctor/Core Cutter Extruder45-6310 3 Compaction Mould45-6412 1 Compaction Pedestal and Mould Holder45-6460 1 Compaction Hammer45-6800/01 1 25 kN Marshall Load Frame45-6850 1 Breaking Head Stability Mould45-6890 1 Flow Meter (Dial Gauge)82-5247 1 Portable Thermometer +50°C to +250°CAlso required, but not part of the basic set:Set 45135/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-2950/01 200 mm dia Hotplate1 78-7350 Field and Laboratory Scale1 23-6191/01 Bench-Mounting Mixer, 4.7 litre capacity1 45-5580/01 Isomantle Electric Heater1 79-5020 8 in. dia ASTM Sieve 4.75 mm mesh1 79-5060 8 in. dia ASTM Sieve 2.36 mm mesh1 79-5400 8 in. inch dia Lid.1 79-5410 8 in. dia Receiver.1 79-5510 8 in. dia ASTM Sieve 9.50 mm mesh1 79-5560 8 in. dia ASTM Sieve 19.0 mm mesh1 79-5580 8 in. dia ASTM Sieve 25.0 mm mesh1 81-0140 Spatula 200 mm blade1 81-0220 Aluminium Scoop, large1 81-0508 Heat Resistant Gloves with Gauntlet1 81-3040 Sample Container, 2.5 litre capacity1 81-4020 Sample Tray 306 x 306 x 38 mm1 82-5261 Thermometer (IP60C)1 82-8700/01 Water Bath 48 litre

Set 45145/1 Design method for the composition ofwearing-course rolled asphalt (Marshall test),BS 598-3

78-0760 1 28 kN Clamped Boss Load Ring23-4200 1 Proctor/Core Cutter Extruder45-6310 4 Compaction Mould45-6410 1 Compaction Pedestal45-6460 1 Compaction Hammer45-6462 1 Paper Discs, pack of 10045-6463 1 Steel Heating Block45-6800/01 1 25 kN Marshall Load Frame45-6850 1 Breaking Head Stability Mould45-6880 1 Flow Meter (Dial Gauge)82-5247 1 Portable Thermometer +50°C to +250°CAlso required, but not part of the basic set:Set 45145/1/AR Also required products set

1 78-1215/01 Drying Oven 50 litre capacity1 78-1245 Dial Thermometer 0 to 300°C1 78-2950/01 200 mm dia Hotplate1 78-7090 Harvard Trip Balance1 78-7110 Weight Set for 78-70901 78-7130 Footed Polypropylene Scoop1 78-7350 Field and Laboratory Scale1 23-3150 Riffle Box, 25 mm slot width1 23-6191/01 Bench-Mounting Mixer, 4.7 litre capacity1 45-5580/01 Isomantle Electric Heater1 81-0140 Spatula 200 mm blade1 81-0220 Aluminium Scoop, large1 81-0508 Heat Resistant Gloves with Gauntlet1 81-3040 Sample Container. 2.5 litre capacity1 81-4020 Sample Tray1 82-5261 Thermometer (IP60C)1 82-8700/01 Water Bath 48 litre

Set 45150/1 Dynamic load testing on asphalt pavementmaterials, ASTM D4123

45-9000/01 1 ELE-MATTA Asphalt Tester45-9000/10 1 Indirect Tensile Jig45-9000/12 1 Creep Testing Jig45-9000/32 2 Vertical Displacement Transducer45-9000/34 2 Horizontal Displacement TransducerAlso required, but not part of the basic set:Set 45150/1/AR Also required products set

1 83-1735/01 Air Compressor Unit, 1000 kPa1 27-1450/01 Pentium P233 PC System1 45-9000/30 Steel Verification Ring1 45-9000/31 Torque Screwdriver1 45-9010/01 Standard Temperature Controlled Cabinet1 45-9020/10 Integrated Temperature Measurement

System1 45-6710/01 ELE Gyropac, Gyratory Compactor

Set 46015/1 Determination of ash content of bitumen,BS 4550, ASTM D482

81-0495 1 Crucible Tongs81-0508 1 Heat Resistant Gloves with Gauntlet83-4160/01 1 1000°C Muffle Furnace82-3320 1 Porcelain Crucible 30 ml82-3325 1 Porcelain Lid for 82-3320Also required, but not part of the basic set:Set 46015/1/AR Also required products set

1 78-2950/01 200 mm dia Hotplate1 78-5335/01 Analytical Electronic Balance

Set 46035/1 Determination of ductility of bitumen orbituminous materials,ASTM D113, AASHTO T51

46-2615/01 1 Ductilometer for testing 3 specimens46-2702 3 Ductility Mould46-2742 3 Base Plate for Ductility Moulds81-0100 1 Spatula, 100 mm blade82-5247 1 Portable Thermometer +50°C to +250°C82-5255 1 Thermometer (IP38C)46-5500/01 1 Constant Temperature BathAlso required, but not part of the basic set:Set 46035/1/AR Also required products set

1 79-5180 8 in. dia ASTM Sieve 300 µm mesh1 79-5410 8 in. dia Receiver

Set 46045/1 Determination of flash point-Cleveland opencup, electrically heated model,BS 4689, ASTM D92

46-3310/01 1 Cleveland Flash Cup Apparatus open cup82-5257 1 Thermometer (IP28C) –6 to +400°C x 2°C

Set 46065/1 Loss-on-heating/thin-film test,BS 2000-45, ASTM D6, D1754,AASHTO T179

46-4100/01 1 Loss-On-Heating/Thin Film Oven46-4350 6 Aluminium Test Pan82-5259 2 Thermometer (IP47C) 155 to 170°C x 0.5°C46-5861 1 Penetration TinAlso required, but not part of the basic set:Set 46065/1/AR Also required products set

1 78-7000 Dial-O-Gram Balance1 81-0508 Heat Resistant Gloves with Gauntlet

Set 46085/1 Determination of softening point, ring andball method, BS 2000-58

46-4501 1 Ring and Ball Apparatus, shouldered pattern rings81-0080 1 Bosshead46-4821/01 1 Magnetic Stirrer81-0090 1 Clamp82-5261 1 Thermometer (IP60C), –2°C to 80°C82-5263 1 Thermometer (IP61C), 30°C to 200°C82-5265 1 Thermometer (IP89C) –1 to +175°C .

Set 46086/1 Determination of softening point, ring andball method, ASTM D36; AASHTO T53

46-4502 1 Ring and Ball Apparatus complete to ASTM D3646-4821/01 1 Magnetic Stirrer81-0080 1 Bosshead81-0090 1 Clamp82-5261 1 Thermometer (IP60C), –2°C to 80°C82-5263 1 Thermometer (IP61C), 30°C to 200°C82-5265 1 Thermometer (IP89C) –1 to +175°C .

Set 46105/1 Determination of penetration,BS 2000-49, ASTM D5, AASHTO T49

46-5290 1 Standard Penetrometer46-5360/10 1 Penetration Needle, unverified46-5800 1 Transfer Dish46-5861 10 Penetration Tin81-0518 1 Timer Clock82-5255 1 Thermometer(IP38C) 23°C to 27°C x 0.1°C46-5500/01 1 Constant Temperature Bath46-5860 10 Penetration Tin, 70 mm dia x 45 mm deep

Buyer’s GuideAsphalt and Specialist Testing: Sets 46125/1 to S1006

19

Set 46125/1 Viscosity of cutback bitumen, electricallyheated method, BS 2000-72

46-6101/01 1 Standard Tar Viscometer46-6300 1 Go/No Go Gauge, for 10 mm cup82-0380 1 Measuring Cylinder 100 ml82-5267 1 Thermometer (IP8C) 0 to 44°C x 0.2°C

Set 46135/1 Standard test method for saybolt viscosity,ASTM D88, AASHTO T72

46-7002/01 1 Saybolt Viscometer46-7002/10 4 Saybolt Viscosity Tube46-7002/18 4 Saybolt Viscosity Flask 60 ml46-7002/20 1 Saybolt Viscosity Oil46-7006 1 Thermometer Pack, Saybolt Viscosity81-0518 1 Timer Clock

Set 47015/1 Methods of test for the determination ofdensity and compaction. The percentagerefusal density test, BS 598-104

78-0120/01 1 Heavy Duty Oven78-1245 1 Dial Thermometer 0 to 300°C34-8100/01 1 Buoyancy Balance, 15 kg x 0.5 g34-8105 1 Cradle23-3710/01 1 Melting Pot 2.3 litre capacity47-0455/01 1 Vibrating Hammer47-0450 6 Split Mould and Base Plate47-0460 1 Small Tamping Foot, 102 mm diameter47-0470 1 Large Tamping Foot, 146 mm diameter81-0140 1 Spatula 200 mm blade81-0703 1 Wax Brush47-0200 1 Digital Thermometer, -50 to +1150°C47-0200/10 1 Heavy Duty Asphalt Probe, 250 mm long82-7371 6 Silicone Grease Spray47-0480 2 300 mm Shank.82-7031 4 Paraffin Wax in 5 kg block82-7876 1 Filter Papers 150 mm dia, box of 100

Set S1000 Determination of compressive strength.Undrained triaxial oil water pressure systemBS1377

25-3516/01 1 Digital Tritest 5078-0260 1 4.5 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions.26-1800/01 1 Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1926 10 Nylon Tubing, 6 mm OD, 3500 kPa. Price per metre

Set S1001 Determination of compressive strength.Undrained triaxial oil water pressure system.Data acquisition system, BS1377

25-3516/01 1 Digital Tritest 5027-1573 1 Submersible Load Transducer Assembly 5 kN capacity27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1293 1 Distance Piece26-1800/01 1 Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk27-1625 1 Pressure Transducer Assembly 1000 kPa26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.

Set S1002 Determination of compressive strength.Undrained triaxial pneumatic pressure systemBS1377

25-3516/01 1 Digital Tritest 5078-0260 1 4.5 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1746 1 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air compressor Unit, 700 kPa26-1926 4 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa

Set S1003 Determination of compressive strength.Undrained triaxial pneumatic pressure systemData Acquisition System, BS1377

25-3516/01 1 Digital Tritest 5027-1573 1 Submersible Load Transducer Assembly 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1625 1 Pressure Transducer Assembly 1000 kPa26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa26-1746 1 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air compressor Unit, 700 kPa working pressure27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk26-1926 4 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length27-1293 1 Distance Piece

Set S1006 Cement Chemical Test using FlamePhotometer, EN196; ASTM C114

38-0200/01 1 Flame Photometer 220-240V 50/60Hz 1ph38-0320/01 1 Air Compressor 220-240V 50/60Hz 1ph525-11/1 1 Recommended Spares Kit for EL38-0200/01525-100/10 1 Sodium Filter525-100/11 1 Potassium Filter525-102 1 Lithium Filter38-0250 1 Calcium Filter38-0260 1 Barium Filter38-0270 1 Gas Regulator for Natural Gas38-0280 1 Gas Regulator for Propane Gas38-0290 1 Gas Regulator for Butane Gas525-111 1 Gas Tubing 2 metres525-112 1 Air Tubing 2 metres485-010 1 Potassium Standard 1000ppm 500 ml485-012 1 Lithium Standard 1000ppm 500 ml485-014 1 Barium Standard 3000ppm 500 ml485-016 1 Sodium Standard 1000ppm 500 ml485-018 1 Calcium Standard 1000ppm 500 ml

Specialist Testing Sets

Buyer’s GuideSpecialist Testing: Sets S1010 to S1019

20

Set S1010 Determination of Compressive Strength(effective stress) drained/undrained. OilWater Pressure System, BS 1377

25-3516/01 1 Digital Tritest 5078-0260 1 4.5 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions27-1625 1 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit26-1890 1 Twin-Burette Volume- Change Unit26-1900 1 Red Dye, kerosene soluble 25 g26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1800/01 2 Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)25-1833/01 1 De-aired Water apparatus26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre

Set S1011 Determination of compressive strength(effective stress) drained/undrained. OilWater Pressure System Data AcquisitionSystem, BS 1377

25-3516/01 1 Digital Tritest 5027-1533 1 Transducer Load ring, 4.5 kN capacity27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1625 3 Pressure Transducer Assembly 1000 kPa27-1641 1 Volume Change Transducer Assembly 80cm3

26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1800/01 2 Pressure Test 170025-1833/01 1 De-aired Water Apparatus26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System.27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk

Set S1012 Determination of Compressive Strength(effective stress) drained/undrained.Pneumatic System, BS 1377

25-3516/01 1 Digital Tritest 5078-0260 1 4.5 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions.27-1625 1 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit26-1890 1 Twin-Burette Volume- Change Unit26-1900 1 Red Dye, kerosene soluble 25 g26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa26-1746 2 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air compressor Unit, 700 kPa working pressure25-1833/01 1 De-aired Water apparatus26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length.

Set S1013 Determination of Compressive Strength(effective stress) drained/undrained.Pneumatic Pressure System DataAcquisition System, BS 1377

25-3516/01 1 Digital Tritest 5027-1573 1 Submersible Load Transducer Assembly, 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1625 3 Pressure Transducer Assembly 1000 kPa27-1641 1 Volume Change Transducer Assembly 80cm3

26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa26-1746 2 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air compressor Unit, 700 kPa working pressure25-1833/01 1 De-aired Water Apparatus27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length.27-1293 1 Distance Piece

Set S1017 Determination of compressive strength,drained and undrained with pore pressuremeasurement oil/water pressure system for38 mm samples, BS 1377

25-3516/01 1 Digital Tritest 5025-4047 1 50 mm Triaxial Cell 1700 kPa25-4166 1 38 mm/1.5 inch Base Adaptor25-4290 1 Membrane Placing Tool 35 mm/38 mm25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter25-4540 1 10 ml Burette, single tube drainage.25-4520 2 Valve,no volume change 1/4inch BSP.25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter25-5061 1 Rubber Membrane 38 mm/1.5 in. dia.r. Pack of 1025-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 1025-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 225-5200 1 Filter Paper Drain 38 mm/1.5 inch dia. Pack of 5025-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.26-1800/01 2 Pressure Test 170026-1805 2 Oil, 2 litres for Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1922 5 6 mm Connector78-0260 1 4.5 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions26-1890 1 Twin-Burette Volume- Change Unit26-1900 1 Red Dye, kerosene soluble 25 g27-1625 1 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit

Set S1018 Determination of compressive strengthdrained and undrained with pore pressuremeasurement oil/water pressure system for50 mm samples, BS 1377

25-3516/01 1 Digital Tritest 5025-4047 1 50 mm Triaxial Cell 1700 kPa25-4168 1 50 mm Base Adapter25-5470 1 Membrane Placing Tool 50 mm diameter25-5480 1 Suction Membrane Device 50 mm diameter25-5500 1 Two-Way Split Former 50 mm diameter25-4540 1 10 ml Burette, single tube drainage25-4520 2 Valve, no volume change25-5430 1 Pressure Pad 50 mm diameter.25-5441 1 Rubber Membrane 50 mm diameter, pack of 1025-5461 1 Membrane Sealing Ring 50 mm dia, pack of 1025-5561 1 Porous disc 50 mm pack of 225-5580 1 Filter Paper Drain 50 mm diameter. Pack of 5025-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.26-1800/01 2 Pressure Test 170026-1805 2 Oil, 2 litres for Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1922 5 6 mm Connector78-0260 1 4.5 kN Clamped Boss Load Ring25-4215 1 Dial Gauge, 50 mm travel x 0.01 mm divisions26-1890 1 Twin-Burette Volume- Change Unit26-1900 1 Red Dye, kerosene soluble 25 g27-1625 1 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit

Set S1019 Determination of compressive strengthdrained and undrained with pore pressuremeasurement oil/water pressure system for100 mm samples, BS 1377

25-3516/01 1 Digital Tritest 5025-4157 1 100 mm Triaxial Cell 1700 kPa25-4186 1 100 mm Base Adaptor25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter25-7640 1 Suction Membrane Device 100 mm/4 inch dia25-7650 1 Two-Way Split Former 100 mm diameter25-4520 2 Valve, no volume change

Continued


21

Set S1019 continued25-7590 1 Pressure Pad 100 mm diameter25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 1025-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 1025-7661 1 Porous Disc 100 mm diameter Pack of 225-7670 1 Filter Paper Drain, 100 mm/4 in. dia.. Pack of 5025-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.26-1800/01 2 Pressure Test 170026-1805 2 Oil, 2 litres for Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1922 5 6 mm Connector78-0460 1 10 kN Clamped Boss Load Ring25-4215 1 Dial Gauge, 50 mm travel x 0.01 mm divisions26-1890 1 Twin-Burette Volume-Change Unit26-1900 1 Red Dye, kerosene soluble 25 g27-1625 1 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit

Set S1020 Determination of compressive strength,drained and undrained with pore pressuremeasurement using DataSystem 6 for38 mm samples, BS 1377

25-3516/01 1 Digital Tritest 5025-4047 1 50 mm Triaxial Cell 1700 kPa25-4166 1 38 mm/1.5 inch Base Adaptor25-4290 1 Membrane Placing Tool 35 mm/38 mm25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter25-4540 1 10 ml Burette, single tube drainage25-4520 2 Valve,no volume change 1/4inch BSP25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter25-5061 1 Rubber Membrane 38 mm/1.5 in. dia. Pack of 1025-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 1025-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 225-5200 1 Filter Paper Drain 38 mm/1.5 in. dia. Pack of 5025-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.26-1800/01 2 Pressure Test 170026-1805 2 Oil, 2 litres for Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1922 5 6 mm Connector27-1573 1 Submersible Load Transducer Assembly 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1293 1 Distance Piece27-1641 1 Volume Change Transducer Assembly 80cm3

27-1625 3 Pressure Transducer Assembly 1000 kPa27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1509/01 1 Standby Power Supply Unit27-1450/01 1 Pentium P233 PC System27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk

Set S1021 Determination of compressive strength,drained and undrained with pore pressuremeasurement using DataSystem 6 for50 mm samples, BS 1377

25-3516/01 1 Digital Tritest 5025-4047 1 50 mm Triaxial Cell 1700 kPa25-4168 1 50 mm Base Adapter25-5470 1 Membrane Placing Tool 50 mm diameter25-5480 1 Suction Membrane Device 50 mm diameter25-5500 1 Two-Way Split Former 50 mm diameter25-4540 1 10 ml Burette, single tube drainage25-4520 2 Valve, no volume change25-5430 1 Pressure Pad 50 mm diameter25-5441 1 Rubber Membrane 50 mm diameter, Pack of 1025-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 1025-5561 1 Porous Disc 50 mm pack of 225-5580 1 Filter Paper Drain 50 mm diameter. Pack of 5025-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel

Continued

Set S1021 continued26-1926 10 Nylon Tubing, 6 mm OD, 3500 kPa. Price per metre26-1800/01 2 Pressure Test 170026-1922 5 6 mm Connector27-1573 1 Submersible Load Transducer Assembly 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1293 1 Distance Piece27-1641 1 Volume Change Transducer Assembly 80cm3

27-1625 3 Pressure Transducer Assembly 1000 kPa27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1509/01 1 Standby Power Supply Unit27-1450/01 1 Pentium P233 PC System27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk26-1805 2 Oil, 2 litres for Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel 1700 kPa

Set S1022 Determination of Compressive Strength(effective stress)drained /undrained.Pneumatic Pressure System 3 cell, BS 1377

25-3516/01 1 Digital Tritest 5078-0260 1 4.5 kN Clamped Boss Load Ring25-4120 1 Dial Gauge, 25 mm travel x 0.01 mm divisions27-1625 1 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit26-1890 3 Twin-Burette Volume-Change Unit26-1900 1 Red Dye, kerosene soluble 25 g26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1872 1 Six-way Pneumatic Pressure Control Panel26-1746 6 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air Compressor Unit, 700 kPa25-1833/01 1 De-aired Water Apparatus26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length

Set S1023 Determination of Compressive Strength(effective stress) drained /undrained.Pneumatic Pressure System 3 cell.Data Acquisition System, BS 1377

25-3516/01 1 Digital Tritest 5027-1533 1 Transducer Load ring, 4.5 kN capacity27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1625 9 Pressure Transducer Assembly 1000 kPa27-1641 3 Volume Change Transducer Assembly 80cm3

26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1872 1 Six-way Pneumatic Pressure Control Panel26-1746 6 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air Compressor Unit, 700 kPa25-1833/01 1 De-aired Water Apparatus27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1502 1 8 Channel Expansion Analogue Input Module27-1450/01 1 Pentium P233 PC System27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length

Set S1030 Triaxial Permeability Oil Water Pressure,BS 1377

27-1625 1 Pressure Transducer Assembly 1000 kPa26-1890 2 Twin-Burette Volume-Change Unit26-1900 1 Red Dye, kerosene soluble 25 g26-1912 1 Water Distribution Panel27-1110/01 1 4 Channel Digital Pressure Readout Unit26-1800/01 3 Pressure Test 170026-1815 3 Pressure Gauge 1700 kPa (250psi)25-1833/01 1 De-aired Water Apparatus26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre


22

Set S1031 Triaxial Permeability. Oil Water Pressure.Data Acquisition System, BS 1377

27-1625 1 Pressure Transducer Assembly 1000 kPa27-1641 2 Volume Change Transducer Assembly 80cm3

26-1912 1 Water Distribution Panel26-1800/01 3 Pressure Test 170026-1815 3 Pressure Gauge 1700 kPa (250psi)25-1833/01 1 De-aired Water Apparatus27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System475-700/15 1 Dialog ADU Software logger. 3.5 inch disk26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.

Set S1032 Triaxial Permeability. Pneumatic PressureSystem, BS 1377

27-1625 1 Pressure Transducer Assembly 1000 kPa26-1890 2 Twin-Burette Volume-Change Unit26-1900 1 Red Dye, kerosene soluble 25 g27-1110/01 1 4 Channel Digital Pressure Readout Unit26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1872 1 Six-way Pneumatic Pressure Control Panel26-1746 3 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air Compressor Unit, 700 kPa25-1833/01 1 De-aired Water Apparatus26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length

Set S1033 Triaxial Permeability Pneumatic PressureSystem Data Acquisition System, BS 1377


27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System475-700/15 1 Dialog ADU Software, 3.5 inch disk26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1872 1 Six-way Pneumatic Pressure Control Panel83-1730/01 1 Air Compressor Unit, 700 kPa26-1746 3 Bladder-type Air/Water Pressure Assembly25-1833/01 1 De-aired Water Apparatus26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length.

Set S1034 Triaxial Permeability Pneumatic PressureSystem 2 cell system, BS 1377

27-1625 2 Pressure Transducer Assembly 1000 kPa27-1110/01 1 4 Channel Digital Pressure Readout Unit26-1890 4 Twin-Burette Volume-Change Unit26-1900 1 Red Dye, kerosene soluble 25 g26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1872 1 Six-way Pneumatic Pressure Control Panel26-1746 6 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air Compressor Unit, 700 kPa25-1833/01 1 De-aired Water Apparatus26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length

Set S1035 Triaxial Permeability Pneumatic PressureSystem 2 cell system.Data Acquisition System, BS 1377


27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1450/01 1 Pentium P233 PC System475-700/15 1 Dialog ADU Software, 3.5 inch disk.26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1872 1 Six-way Pneumatic Pressure Control Panel26-1746 6 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air Compressor Unit, 700 kPa25-1833/01 1 De-aired Water Apparatus26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length

Set S1040 Stress Path Testing System for 50 mmsamples, BS 1377

25-9810 1 ELE Stress Path Cell complete with 4.5 kNSubmersible Load Transducer

25-9810/20 1 50 mm Base Adaptor for ELE Stress Path Cell25-9810/21 1 50 mm Pressure Pad for ELE Stress Path Cell25-9810/12 1 Vacuum Pad for ELE Stress Path Cell25-5561 1 Porous disc 50 mm pack of 225-5470 1 Membrane Placing Tool 50 mm diameter25-5480 1 Suction Membrane Device 50 mm diameter25-5441 1 Rubber Membrane 50 mm diameter. Pack of 1025-5461 1 Membrane Sealing Ring 50 mm diameter. Pack of 1025-9892 1 50 mm Axial Strain Transducer27-1641 1 Volume Change Transducer Assembly 80cm3

27-1625 3 Pressure Transducer Assembly 1000 kPa27-1635 1 Pressure Transducer Assembly 3500 kPa25-9880/10 1 Constant Rate of Strain Pump25-9880/15 3 Pressure Regulator, 1000 kPa max.26-1746 3 Bladder-type Air/Water Pressure Assembly26-1870 1 6-Way Water Distribution Panel25-1833/01 1 De-aired Water Apparatus25-9885/01 1 ELE Stress Path Control System83-1730/01 1 Air Compressor Unit, 700 kPa27-1450/01 1 Pentium P233 PC System25-9896 1 Management Software Package

Set S1041 Special Soil Testing set comprising Triaxial,One Dimensional Consolidation andDirect Shear equipment

25-3516/01 1 Digital Tritest 5025-4047 1 50 mm Triaxial Cell 1700 kPa25-4168 1 50 mm Base Adapter25-5470 1 Membrane Placing Tool 50 mm diameter25-5480 1 Suction Membrane Device 50 mm diameter25-5500 1 Two-Way Split Former 50 mm diameter25-4540 1 10 ml Burette, single tube drainage25-4520 2 Valve, no volume change25-5430 1 Pressure pad 50 mm diameter25-5441 1 Rubber Membrane 50 mm diameter, Pack of 1025-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 1025-5561 1 Porous disc 50 mm pack of 225-5580 1 Filter Paper Drain 50 mm diameter. Pack of 5027-1533 1 Transducer Load Ring, 4.5 kN capacity27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1625 3 Pressure Transducer Assembly 1000 kPa27-1641 1 Volume Change Transducer Assembly 80cm3

26-1800/01 2 Pressure Test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa25-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel25-0402 1 Consolidation Frame25-0408 1 Set of Weights, 100 kg total weight25-0503 1 Consolidation Cell, 75 mm diameter sample27-1649 1 Consolidation Transducer Assembly 10 mm travel26-2112/01 1 Digital Direct/Residual Shear Apparatus26-2132 1 Set of Weights, 50 kg slotted, uncalibrated26-2181 1 Shear Box Assembly, 60 mm sq27-1665 1 Transducer Load Ring 2 kN capacity27-1689 1 Vertical Displacement Transducer Assembly27-1697 1 Horizontal Displacement Transducer Assembly27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1502 1 8 Channel Expansion Analogue Input Module27-1450/01 1 Pentium P233 PC System27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk27-1769 1 One Dimensional Consolidation Program, 3.5 in. disk27-1781 1 Direct/Residual Shear Program 3.5 inch disk

Set S1042 Stress Path Testing System usingTritest Load Frame

25-3516/01 1 Digital Tritest 5027-1625 3 Pressure Transducer Assembly 1000 kPa27-1573 1 Submersible Load Transducer Assembly 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1293 1 Distance Piece27-1641 1 Volume Change Transducer Assembly 80cm3

25-9885/01 1 ELE Stress Path Control System25-9880/15 2 Pressure Regulator, 1000 kPa max26-1746 2 Bladder-type Air/Water Pressure Assembly25-1833/01 1 De-aired Water Apparatus27-1450/01 1 Pentium P233 PC System25-9896 1 Management Software Package26-1870 1 6-Way Water Distribution Panel26-1769 1 Nylon Tubing 30 metre length26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre.


23

Set S1043 Special Triaxial Test set 1.4in. and 2.8in. diaspecimens

25-3516/01 1 Digital Tritest 5025-4117 1 70 mm Triaxial Cell 1700 kPa25-4170 1 35 mm/1.4 inch Base adaptor25-4290 1 Membrane Placing Tool 35 mm/38 mm25-4300 1 Suction Membrane Device 35 mm/1.4 inch dia.25-4320 1 Two-Way Split Former 35 mm/1.4 inch diameter25-4540 1 10 ml Burette, single tube drainage25-4520 2 Valve, no volume change25-4250 1 Pressure Pad 35 mm/1.4 inch diameter25-4261 1 Rubber Membrane 35 mm/1.4 in. dia. Pack of 1025-4281 1 Membrane Sealing Ring 35 mm/1.4 in. dia. Pack of 1025-4461 1 Porous Disc 35 mm 1.4 inch diameter. Pack of 225-4880 1 Filter Paper Drain, 35 mm/1.4 inch Pack of 5025-4178 1 2.8 inch Base Adaptor25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter25-6660 1 Suction Membrane Device 2.8 inch diameter25-6680 1 Two-Way Split Former 2.8 inch diameter25-4540 1 10 ml Burette, single tube drainage25-6630 1 Pressure Pad, 2.8 inch diameter25-6441 1 Rubber Membrane 70 mm/2.8 in. dia. Pack of 1025-6641 1 Membrane Sealing Ring 2.8 in. dia. Pack of 1025-6721 1 Porous Disc 2.8 inch diameter25-6580 1 Filter Paper Drain 70 mm/2.8 in. dia. Pack of 5025-1833/01 1 De-aired Water Apparatus26-1912 1 Water Distribution Panel26-1926 1 Nylon Tubing, 6 mm o.d, 3500kPa. Price per metre26-1800/01 2 Pressure Test 170026-1805 1 Oil, 2 litres for pressure test 170026-1815 1 Pressure Gauge 1700 kPa (250psi)26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1922 1 6 mm Connector27-1573 1 Submersible Load Transducer Assembly 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1293 1 Distance Piece27-1641 1 Volume Change Transducer Assembly 80cm3

27-1625 3 Pressure Transducer Assembly 1000 kPa27-1495/01 1 ADU 8 Channel Data Acquisition Unit27-1509/01 1 Standby Power Supply Unit27-1450/01 1 Pentium P233 PC System27-1755 1 Quick Undrained Triaxial Program, 3.5 inch disk27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk

Set S1044 Stress Path and Effective Stress System,BS 1377

25-3516/01 1 Digital Tritest 5027-1625 3 Pressure Transducer Assembly 1000 kPa27-1573 1 Submersible Load Transducer Assembly 5 kN27-1617 1 Axial Strain Transducer Assembly 50 mm travel27-1293 1 Distance Piece27-1641 1 Volume Change Transducer Assembly 80cm3

25-9885/01 1 ELE Stress Path Control System25-9880/15 2 Pressure Regulator, 1000 kPa max26-1746 2 Bladder-type Air/Water Pressure Assembly26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa26-1870 1 6-Way Water Distribution Panel25-1833/01 1 De-aired Water Apparatus27-1450/01 1 Pentium P233 PC System27-1761 1 CU/CD Effective Stress Triaxial Program, 3.5 in. disk25-9896 1 Management Software Package26-1769 1 Nylon Tubing 30 metre length26-1926 10 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre

Set S1046 Dynamic Load Testing of Asphalt PavementMaterials, BS DD 213, BS DD 226, BS 598;ASTM D4123

45-9000/01 1 ELE-MATTA Asphalt Tester complete45-9000/10 1 Indirect Tensile Jig45-9000/12 1 Creep Testing Jig )45-9000/32 2 Vertical Displacement Transducer45-9000/34 2 Horizontal Displacement Transducer83-1735/01 1 Air Compressor Unit, 1000 kPa27-1450/01 1 Pentium P233 PC System45-9000/30 1 Steel Verification Ring, calibration check device45-9000/31 1 Torque Screwdriver for indirect tension tests45-9020/01 1 Environmental Chamber45-9020/10 1 Integrated Temperature Measurement System

Set S1050 Cyclic Triaxial System for 100 mm diasamples, ASTM D3999

25-8700/01 1 Cyclic Triaxial Control System25-8700/10 1 5 kN Submersible Load Cell25-8700/20 1 Axial Displacement Transducer, ±25 mm stroke25-8700/30 1 Volume Change Transducer 80 cm3

25-8700/40 3 Pressure Transducer, 1000 kPa25-4157 1 100 mm Triaxial Cell 1700 kPa25-4186 1 100 mm Base Adaptor25-7590 1 Pressure Pad 100 mm diameter26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa83-1735/01 1 Air Compressor Unit, 1000 kPa26-1742/01 1 Compressed Air Dryer, 1600 kPa26-1746 2 Bladder-type Air/Water Pressure Assembly26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre25-1833/01 1 De-aired Water Apparatus26-1769 1 Nylon Tubing 30 metre length27-1450/01 1 Pentium P233 PC System25-8700/60 1 Connection Kit25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter25-7640 1 Suction Membrane Device 100 mm/4 inch dia25-7650 1 Two-Way Split Former 100 mm diameter25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 1025-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 1025-7661 1 Porous Disc 100 mm diameter Pack of 225-7670 1 Filter Paper Drain, 100 mm/4 in. dia. Pack of 50

Set S1051 Cyclic Triaxial Control System with dataacquisition, load frame and software,complete with Radial and Axial on SampleTransducers

25-8700/01 1 Cyclic Triaxial Control System25-8700/10 1 5 kN Submersible Load Cell25-8700/20 1 Axial Displacement Transducer, ± 25 mm stroke25-8700/30 1 Volume Change Transducer 80 cm3

25-8700/40 3 Pressure Transducer, 1000kPa25-8700/50 1 100 mm Triaxial Cell25-4186 1 100 mm Base Adaptor25-7590 1 Pressure Pad 100 mm diameter26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa83-1735/01 1 Air Compressor Unit, 1000 kPa26-1742/01 1 Compressed Air Dryer 1600 kPa26-1746 2 Bladder-type Air/Water Pressure Assembly26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre25-1833/01 1 De-aired Water Apparatus26-1769 1 Nylon Tubing 30 metre length27-1450/01 1 Pentium P233 PC System25-8700/60 1 Connection Kit25-8730 1 Radial Strain Transducer25-8735 1 Axial Strain Transducer (set of two)25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter25-7640 1 Suction Membrane Device 100 mm/4 inch diameter25-7650 1 Two-Way Split Former 100 mm diameter25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 1025-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 1025-7661 1 Porous Disc 100 mm diameter Pack of 225-7670 1 Filter Paper Drain, 100 mm/4 in. dia. Pack of 50

Set S1055 Pneumatic Pressure System for 1 Cellsystem, For Two Independent Sources,700 kPa Max.

26-1746 2 Bladder-type Air/Water Pressure Assembly83-1730/01 1 Air Compressor Unit, 700 kPa26-1880 1 Universal Pump and Pressure Indicating Panel, 1700 kPa26-1760 1 Pneumatic Pressure Reducing Panel 1000 kPa26-1926 20 Nylon Tubing, 6 mm o.d, 3500 kPa. Price per metre26-1769 1 Nylon Tubing 30 metre length

Set S1057 Direct/Residual Shear Apparatus, 60 mmSquare Specimen with Transducers for usewith ADU Logging SystemBS 1377; ASTM D3080

27-1531 1 Transducer Load Ring 3 kN capacity27-1689 1 Vertical Displacement Transducer Assembly27-1697 1 Horizontal Displacement Transducer Assembly26-2112/01 1 Digital Direct/Residual Shear Apparatus26-2181 1 Shear Box Assembly, 60 mm square26-2185 1 Specimen Cutter, 60 mm square26-2189 1 Specimen Extrusion Tool, 60 mm square26-2132 1 Set of Weights, 50 kg slotted, uncalibrated27-1781 1 Direct/Residual Shear Program 3.5 inch disk


24

Set S1060 50 mm Triaxial Cell with 38 mm accessories25-4047 1 50 mm Triaxial Cell 1700 kPa25-4166 1 38 mm/1.5 inch Base Adaptor25-4290 1 Membrane Placing Tool 35 mm/38 mm25-5100 1 Suction Membrane Device 38 mm/1.5 inch dia.25-5120 1 Two-Way Split Former, 38 mm/1.5 inch diameter25-5050 1 Pressure Pad, 38 mm/1.5 inch diameter25-5061 1 Rubber Membrane 38 mm/1.5 in. dia. Pack of 1025-5081 1 Membrane Sealing Ring 38 mm/1.5 in. dia. Pack of 1025-5181 1 Porous Disc 38 mm/1.5 inch diameter. Pack of 225-5200 1 Filter Paper Drain 38 mm/1.5 in. dia. Pack of 5025-4200 1 Piston Restraint Clamp for ELE triaxial cells,

manufactured from July 199625-4520 2 Valve, no volume change

Set S1061 50 mm Triaxial Cell with 50 mm accessories25-4047 1 50 mm Triaxial Cell 1700 kPa25-4168 1 50 mm Base Adapter25-5470 1 Membrane Placing Tool 50 mm diameter25-5480 1 Suction Membrane Device 50 mm diameter25-5500 1 Two-Way Split Former 50 mm diameter25-5430 1 Pressure pad 50 mm diameter25-5441 1 Rubber Membrane 50 mm diameter, Pack of 1025-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 1025-5561 1 Porous disc 50 mm pack of 225-5580 1 Filter Paper Drain 50 mm diameter. Pack of 5025-4200 1 Piston Restraint Clamp for ELE triaxial cells,

manufactured from July 1996.25-4520 2 Valve, no volume change

Set S1062 70 mm Triaxial Cell with 50 mm accessories25-4117 1 70 mm Triaxial Cell 1700 kPa25-4174 1 50 mm Base Adaptor25-5470 1 Membrane Placing Tool 50 mm diameter25-5480 1 Suction Membrane Device 50 mm diameter25-5500 1 Two-Way Split Former 50 mm diameter25-5430 1 Pressure pad 50 mm diameter25-5441 1 Rubber Membrane 50 mm diameter, Pack of 1025-5461 1 Membrane Sealing Ring 50 mm dia, Pack of 1025-5561 1 Porous disc 50 mm pack of 225-5580 1 Filter Paper Drain 50 mm diameter. Pack of 5025-4200 1 Piston Restraint Clamp for ELE triaxial cells,

manufactured from July 1996.25-4520 2 Valve, no volume change

Set S1063 70 mm Triaxial Cell with 70 mm accessories25-4117 1 70 mm Triaxial Cell 1700 kPa25-4176 1 70 mm Base Adaptor25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter25-6480 1 Suction Membrane Device 70 mm diameter25-6500 1 Two-Way Split Former, 70 mm diameter25-6430 1 Pressure Pad 70 mm diameter.25-6441 1 Rubber Membrane 70 mm/2.8 in. dia. Pack of 1025-6461 1 Membrane Sealing Ring 70 mm dia Pack of 1025-6561 1 Porous Disc 70 mm diameter Pack of 225-6580 1 Filter Paper Drain 70 mm/2.8 in. dia. Pack of 5025-4200 1 Piston Restraint Clamp for ELE triaxial cells,


Set S1064 100 mmTriaxial Cell with 70 mm accessories25-4157 1 100 mm Triaxial Cell 1700 kPa25-4182 1 70 mm Base Adaptor25-6470 1 Membrane Placing Tool 70 mm/2.8 inch diameter25-6480 1 Suction Membrane Device 70 mm diameter25-6500 1 Two-Way Split Former, 70 mm diameter25-6430 1 Pressure Pad 70 mm diameter25-6441 1 Rubber Membrane 70 mm/2.8 in. dia. Pack of 1025-6461 1 Membrane Sealing Ring 70 mm dia Pack of 1025-6561 1 Porous Disc 70 mm diameter Pack of 225-6580 1 Filter Paper Drain 70 mm/2.8 in. dia. Pack of 5025-4200 1 Piston Restraint Clamp for ELE triaxial cells,


Set S1065 100 mmTriaxial Cell with 100 mm accessories25-4157 1 100 mm Triaxial Cell 1700 kPa25-4186 1 100 mm Base Adaptor25-7610 1 Membrane Placing Tool 100 mm/4 inch diameter25-7640 1 Suction Membrane Device 100 mm/4 inch dia25-7650 1 Two-Way Split Former 100 mm diameter25-7590 1 Pressure Pad 100 mm diameter25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 1025-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 1025-7661 1 Porous Disc 100 mm diameter Pack of 225-7670 1 Filter Paper Drain, 100 mm/4 in. dia. Pack of 5025-4200 1 Piston Restraint Clamp for ELE triaxial cells,


Set S1067 Proctor Penetrometer Spring Type withAdaptor Stem, Needle points 1,3/4,1/2,1/3,1/5,1/10,1/20 in2 area with Adaptor and Case,ASTM D1558

29-3925 1 Proctor Penetrometer Spring Type29-3929 1 Set of Needle Points29-3933 1 Case for Proctor Penetrometer

Set S1068 Transducer Load Rings 2, 3, 4.5, 10, 28, 50 kNCapacity Calibrated in Compression. Fittedwith 5 pin DIN plugs

27-1529 1 Transducer Load Ring, 2 kN capacity, compression27-1531 1 Transducer Load Ring 3 kN capacity, compression27-1533 1 Transducer Load ring, 4.5 kN capacity, compression27-1535 1 Transducer Load Ring, 10 kN capacity, compression27-1539 1 Transducer Load Ring 28 kN capacity, compression27-1541 1 Transducer Load ring 50 kN capacity, compression

Set S1070 Set of British Standard Sieves and SieveShaker, BS 410

79-0020 1 200 mm dia Receiver79-0070 1 200 mm dia BS Sieve 63 µm stainless steel mesh.79-0080 1 200 mm dia BS Sieve 75 µm stainless steel mesh.79-0120 1 200 mm dia BS Sieve 150 µm stainless steel mesh.79-0140 1 200 mm dia BS Sieve 212 µm stainless steel mesh.79-0160 1 200 mm dia BS Sieve 300 µm stainless steel mesh.79-0180 1 200 mm dia BS Sieve 425 µm stainless steel mesh.79-0200 1 200 mm dia BS Sieve 600 µm stainless steel mesh.79-0240 1 200 mm dia BS Sieve 1.18 mm stainless steel mesh.79-0270 1 200 mm dia BS Sieve 2.00 mm stainless steel mesh.79-0010 1 200 mm Dia Lid79-2020 1 300 mm dia Receiver.79-2280 1 300 mm dia BS Sieve 2.36 mm stainless steel mesh.79-2300 1 300 mm dia BS Sieve 3.35 mm stainless steel mesh.79-2515 1 300 mm dia BS Sieve 5.00 mm perforated plate.79-2525 1 300 mm dia BS Sieve 6.30 mm perforated plate.79-2555 1 300 mm dia BS Sieve 10.0 mm perforated plate.79-2575 1 300 mm dia BS Sieve 14.0 mm perforated plate.79-2595 1 300 mm dia BS Sieve 20.0 mm perforated plate.79-2615 1 300 mm dia BS Sieve 28.0 mm perforated plate.79-2640 1 300 mm dia BS Sieve 37.5 mm perforated plate.79-2655 1 300 mm dia BS Sieve 50.0 mm perforated plate.79-2670 1 300 mm dia BS Sieve 63.0 mm perforated plate.79-2680 1 300 mm dia BS Sieve 75.0 mm perforated plate.79-2010 1 300 mm dia Lid.80-0350/01 1 Sieve Shaker EFL2000/279-7200 2 Sieve Brush, double ended, brass and nylon bristle

Set S1075 Repeated and Dynamic Load Testing ofAsphalt and Unbound Pavement Materials(Closed Loop Control)BS DD 213, BS DD 226, BS 598; ASTM D4123

45-9100/01 1 UTM-5P Base System45-9101 1 Indirect Tensile Set45-9102 1 Creep Testing Set45-9001 1 Unbound Testing Set25-7621 1 Rubber Membrane 100 mm/4 in. dia. Pack of 1025-7631 1 Membrane Sealing Ring 100 mm dia. Pack of 1025-7661 1 Porous Disc 100 mm diameter Pack of 283-1735/01 1 Air Compressor Unit, 1000 kPa27-1450/01 1 Pentium P233 PC System45-9010/01 1 Standard Temperature Controlled Cabinet

25

BS 340 Compression Testing of 150 mm Cubes andFlexural Testing of Beams, Kerbs, Blocks and FlagsSet 36060/1

BS 368 Compression Testing of 150 mm Cubes andFlexural Testing of Beams, Kerbs, Blocks and FlagsSet 36060/1

BS 410 Set of British Standard Sieves and Sieve ShakerSet S1070

BS 598 Dynamic Load Testing of Asphalt PavementMaterialsSet S1046

Repeated and Dynamic Load Testing ofAsphalt and Unbound Pavement Materials(Closed Loop Control)Set S1075

BS 598-2 Water Content of AsphaltSet 45095/1

BS 598-3 Design Method for the Composition ofWearing-course Rolled Asphalt (Marshall Test)Set 45145/1

BS 598-104 Methods of test for the determination ofdensity and compaction. The percentagerefusal density testSet 47015/1

BS 812 Bulk density of filler in keroseneSet 42235

Determination of bulk density of aggregatesSet 42215

Determination of chloride contentSet 42245

Determination of flakiness and elongationSet 42105

Determination of moisture content,definitive (oven-drying) methodSet 42025/1

Determination of moisture content,modified drying method, high temperatureSet 42035/1

Determination of moisture content,modified drying method, microwave ovenSet 42045/1

Determination of total sulphate content by acidextraction (method B)Set 42265/1

Particle density and water absorption ofaggregate 20 mm and smaller (gas jar method)Set 42175/1

Particle density and water absorption ofaggregate between 63 mm and 5 mmSet 42155/1

Particle density of fillersSet 42195/1

Polished stone valueSet 42345/1

British Standard Test Sets

Buyer’s GuideIndex of Standard Test Sets

BS 812-103 Particle size distributionSet 42065

BS 812-119 Acid soluble material in fine aggregatesSet 42275

BS 812-120 Testing and Classifying drying shrinkage ofaggregates in concreteSet 42278

BS 812-121 Soundness of Aggregates (In MagnesiumSulphate)Set 42310

BS 890 Pat test for soundness of hydrated lime andgypsum building plastersSet 38155/1

BS 1191-1 Expansion of gypsum plastersSet 38175

Pat test for soundness of hydrated lime andgypsum building plastersSet 38155/1

BS 1377 Autographic unconfined compressive strengthSet 25085

Carbonate content, rapid titration methodSet 24245

CBR, in-situSet 24515

CBR, laboratory method, penetration testSet 24425/1

Compressive Strength (effective stress)drained/undrained. Oil Water Pressure SystemSet S1010

Compressive strength, drained and undrained withpore pressure measurement oil/water pressuresystem for 38 mm samplesSet S1017

Compressive strength drained and undrained withpore pressure measurement oil/water pressuresystem for 50 mm samplesSet S1018

Compressive strength drained and undrained withpore pressure measurement oil/water pressuresystem for 100 mm samplesSet S1019

Compressive strength, drained and undrained withpore pressure measurement using DataSystem 6for 38 mm samplesSet S1020

Compressive strength, drained and undrained withpore pressure measurement using DataSystem 6for 50 mm samplesSet S1021

Compressive Strength (effective stress)drained/undrained. Oil Water Pressure SystemData Acquisition SystemSet S1011

Compressive Strength (effective stress)drained/undrained. Pneumatic SystemSet S1012

Compressive Strength (effective stress)drained/undrained. Pneumatic Pressure System.Data Acquisition SystemSet S1013

Buyer’s GuideIndex of British Standard Test Sets

26

BS 1377 Compressive Strength (effective stress)drained /undrained.Pneumatic Pressure System 3 cellSet S1022

Compressive Strength (effective stress)drained /undrained.Pneumatic Pressure System 3 cell.Data Acquisition SystemSet S1023

Compressive Strength (effective stress)drained /undrained.Pneumatic Pressure System 3 cell.Data Acquisition SystemSet S1024

Compressive strength.Undrained triaxial oil water pressure systemSet S1000

Compressive strength.Undrained triaxial oil water pressure system.Data acquisition systemSet S1001

Compressive strength.Undrained triaxial pneumatic pressure systemSet S1002

Compressive strength.Undrained triaxial pneumatic pressure systemData Acquisition SystemSet S1003

Compressive Undrained Triaxial Strength (QUTXL)38 mm dia samplesSet 25095/1

Compressive Undrained or Drained Triaxial Strength(CU/CD)Set 25105/1

Density, immersion in waterSet 24085/1

Direct/Residual Shear Test, 60 mm square specimenSet 26045/1

Direct/Residual Shear Apparatus, 60 mmSquare Specimen with Transducers for usewith ADU Logging SystemSet S1057

Dry density in-situ, core-cutter methodSet 29075

Dry density in-situ, sand replacement methodSet 29045

Dry density in-situ, sand replacementmethod (suitable for cohesive soils)Set 29035

Dry density/moisture relationship 2.5 kg rammermethod (for soils with some coarse gravel)Set 24315

Dry density/moisture relationship, 4.5 kg rammermethod (for soils with some coarse gravelSet 24335

Dry density/moisture relationship, 2.5 kg rammermethod, (for up to medium gravel size)Set 24305

Dry density/moisture relationship, 4.5 kg rammermethod (for up to medium gravel size)Set 24325

BS 1377 Dry density/moisture relationship, vibratinghammer methodSet 24345/1

Erodibility, pinhole methodSet 25045

Expansion (swell) testSet 24495

Linear shrinkageSet 24075

Liquid Limit, Casagrande methodSet 24015

Liquid Limit, cone penetrometer methodSet 24035

Loss-on-ignitionSet 24205/1

Maximum density of sandsSet 24385

Minimum density of gravelly soilsSet 24395

Moisture content determination, oven methodSet 23055/1

Moisture content determination, sand bath methodSet 23065/1

One-dimensional consolidationSet 25015

Organic matter contentSet 24195

Particle density of fine soils, small pyknometermethodSet 24115/1

Particle density of fine to medium andcoarse-grained soils, gas jar method,Set 24105/1

Particle density of non-cohesive soils up to 20 mmparticle size, large pyknometer methodSet 24125

Particle size distribution, sedimentation byhydrometer methodSet 24155/1

Particle size distribution, sedimentation byPipette methodSet 24175/1

Particle size distribution, wet and dry methodSet 24145

Permeability of soil, constant head permeameterSet 25025

pH valueSet 24275

Plastic limit and plasticity indexSet 24045

Preparation of Disturbed Samples of SoilSet 23015/1

Preparation of Undisturbed Samples of Soilfor testingSet 23025/1


27

BS 1377 Rate of consolidation of soils using anELE/Rowe-type hydraulic consolidation cellSet 25055/1

Sample preparation for CBR by dynamiccompaction, 2.5 kg rammerSet 24445

Sample preparation for CBR by dynamiccompaction, 4.5 kg rammerSet 24455

Sample preparation for CBR by obtaining anundisturbed sampleSet 24475

Sample preparation for CBR by static compressionSet 24435

Sample preparation for CBR by vibratingcompactionSet 24465/1

Saturation moisture content of chalk,Set 23075/1

Shear strength by the laboratory vane methodSet 26065

Shrinkage, volumetric methodSet 24055

Shrinkage, limit, volumetric methodSet 24065

Stress Path and Effective Stress SystemSet S1044

Stress Path Testing System for 50 mm samplesSet S1040

Sulphate content, gravimetric methodSet 24225/1

Sulphate content, preparation of soil, acid extract,water extract and groundwaterSet 24215/1

Total dissolved solidsSet 24265/1

Triaxial Permeability Oil Water PressureSet S1030

Triaxial Permeabilit. Oil Water PressureData Acquisition SystemSet S1031

Triaxial Permeabilit, Pneumatic Pressure SystemSet S1032

Triaxial Permeability Pneumatic Pressure SystemData Acquisition SystemSet S1033

Triaxial Permeability Pneumatic Pressure System2 cell systemSet S1034

Triaxial Permeability Pneumatic Pressure System2 cell system. Data Acquisition SystemSet S1035

Unconfined compressive strengthSet 25075

Water-soluble and acid-soluble chloride contentSet 24255/1

BS 1881 Compression Testing of 150 mm Cubes andFlexural Testing of Beams, Kerbs, Blocks and FlagsSet 36060

Drying, shrinkage and moisture movementSet 34375

BS 1881-101 Mixing and sampling fresh concrete, site andlaboratorySet 34015

BS 1881-102 Slump determinationSet 34025

BS 1881-103 Compacting factor determinationSet 34035

BS 1881-104 Vebe timeSet 34045/1

BS 1881-105 Flow determinationSet 34055

BS 1881-106 Air content of fresh concrete, type B methodSet 34165

BS 1881-107 Density of compacted fresh concreteSet 34125

BS 1881-108 Making 100 mm test cubes from fresh concreteSet 34195

Making 150 mm test cubes from fresh concreteSet 34205

Making test beams from fresh concrete:100 x 100 x 500 mmSet 34225

BS 1881-109 Making test beams from fresh concrete:150 x 150 x 750 mmSet 34215

BS 1881-110 Making test cylinders from fresh concrete:100 mm diameter x 200 mmSet 34255

Making test cylinders from fresh concrete:150 mm diameter x 300 mmSet 34235

Making testing cylinders from fresh concrete:150 mm diameter x 150 mmSet 34245

Sulphur capping 100 mm hardened cylindersand coresSet 34325/1


BS 1881-111 Curing of test specimens, (20°C method)Set 34345/1

BS 1881-114 Density of hardened concreteSet 34140

BS 1881-120 Sulphur capping 100 mm hardened cylindersand coresSet 34325/1


BS 1881-122 Determination of total absorptionSet 35395/1


28

BS 1881-125 Mixing and sampling fresh concrete, site andlaboratorySet 34015

BS 1881-129 Density of partially compacted semi-dry concreteSet 34130

BS 1881-131 Preparation of 100 mm concrete cubesSet 39025/1

BS 1881-208 Determination of initial surface absorption (ISAT)Set 35405

BS 1924 Dry density in-situ, sand replacement methodSet 29045

Dry density in-situ, sand replacement method(suitable for cohesive soils)Set 29035

Dry density/moisture relationship, 2.5 kg rammermethod, (for up to medium gravel size)Set 24305

Sand equivalent valueSet 24185/1

BS 2000-45 Loss-on-heating/thin-film testSet 46065/1

BS 2000-49 Determination of penetrationSet 46105/1

BS 2000-58 Determination of softening point, ring andball methodSet 46085/1

BS 2000-72 Viscosity of cutback bitumen, electrically heatedmethodSet 46125/1

BS 3892 Preparation and testing of 40 x 40 x 160 mmmortar prismsSet 39045/1

BS 3892-1 Determination of moisture contentSet 38340/1

Determination of water requirementSet 38350/1

Determination of pozzolanic activity indexSet 38370/1

BS 4359-2 Specific surface (fineness)Set 38015

Air permeability (fineness)Set 38025

BS 4550 Determination of ash content of bitumenSet 46015/1

BS 4550-3 Compression testing 70.7 mm mortar cubesand 100 mm concrete cubesSet 39105/1

Determination of density of cementSet 38035/1

Heat of hydration of Portland cementSet 38195/1

Preparation of 70.7 mm mortar cubesSet 39015/1

BS 4551 Flow of mortars and hydraulic cementSet 38265/1

BS 4551-1 Air content of freshly- mixed mortars,density methodSet 38295

Consistence of mortars, dropping ball methodSet 38235

Consistence retentivity and water retentivitySet 38245

BS 4689 Determination of flash point-Cleveland opencup, electrically heated modelSet 46045/1

BS 5075 Determination of compacting factorSet 34035

BS 5075 Determination of slumpSet 34025

BS 6463-4 Coarse material in hydrated lime and lime puttySet 38055

Consistence of mortars, dropping ball methodSet 38235

Consistence retentivity and water retentivitySet 38245

Flow of building limesSet 38275

General expansion test for dry hydrated limeSet 38125/1

Specific surface (fineness),The Constant Volume Method of RigdenSet 38015

BS DD 213 Dynamic Load Testing of Asphalt PavementMaterialsSet S1046

Repeated and Dynamic Load Testing of Asphalt andUnbound Pavement Materials(Closed Loop Control)Set S1075

BS DD 226 Dynamic Load Testing of Asphalt PavementMaterialsSet S1046


BS DD 250 Determination of Binder Content by theIgnition MethodSet 45080/1

Buyer’s GuideIndex of ASTM Test Sets

29

ASTM C29 Determination of the unit weight of aggregateSet 42225

ASTM C31 Making/curing concrete specimensSet 34265

ASTM C33 Sieve analysisSet 42075

ASTM C40 Detection of organic impurities in sands forconcreteSet 42285

ASTM C87 The effect of organic impurities in fine aggregateson strength of mortarSet 42295/1

ASTM C88 Soundness of aggregates in sodium sulphate ormagnesium sulphateSet 42305/1

ASTM C109 Preparation and testing of 50 mm hydrauliccement mortar cubesSet 39035/1

ASTM C114 Cement Chemical Test using Flame PhotometerSet S1006

ASTM C115 Fineness of fly ash (PFA) by wet sievingSet 38360

ASTM C117 Materials finer than 75 µm sieve in mineralaggregate by washingSet 42085

ASTM C127 Specific gravity and absorption of coarse aggregateSet 42165/1

ASTM C128 Specific gravity and absorption of fine aggregatesSet 42185

ASTM C131 Aggregate abrasion value using Los Angelesabrasion machineSet 42335/1

ASTM C136 Sieve analysisSet 42075

ASTM C138 Weight per cubic metre of fresh concreteSet 34135

ASTM C143 Determination of slumpSet 34025

ASTM C151 Expansion of Portland cementSet 38145/1

ASTM C185 Air content of hydraulic cement mortarSet 38305/1

ASTM C186 Heat of hydration of cementSet 38215/1

ASTM C187 Consistence and setting timeSet 38085

ASTM C188 Specific gravity of hydraulic cementSet 38045

ASTM C190 Preparation and tensile testing of cementbriquettesSet 39115/1

ASTM C191 Consistence and setting timeSet 38085

ASTM C192 Making/curing concrete specimensSet 34265

ASTM C204 Air permeability (fineness)Set 38025

ASTM C230 Flow of mortars and hydraulic cementSet 38265/1

ASTM C231 Air content of fresh concrete, type B methodSet 34165

ASTM C232 Bleeding of concrete method ASet 34175

ASTM C266 Time of setting of hydraulic cement byGillmore needlesSet 38095

ASTM C403 Setting time by penetration resistanceSet 34075

ASTM C430 Fineness of fly ash (PFA) by wet sievingSet 38360

ASTM C535 Aggregate abrasion value using Los Angelesabrasion machineSet 42335/1

ASTM D5 Determination of penetrationSet 46105/1

ASTM D6 Loss-on-heating/thin-film testSet 46065/1

ASTM D36 Determination of softening point, ring and ballmethodSet 46086/1

ASTM D88 Standard test method for Saybolt ViscositySet 46135/1

ASTM D92 Determination of flash point-Cleveland opencup, electrically heated modelSet 46045/1

ASTM D113 Determination of ductility of bitumen orbituminous materialsSet 46035/1

ASTM D421 Dry preparation of soil samples for grain sizeanalysis and determination of soil constantsSet 23035

ASTM D422 Grain size analysis of soilSet 24165/1

ASTM D427 Determination of shrinkage, limit, volumetricmethodSet 24065

ASTM D482 Determination of ash content of bitumenSet 46015/1

ASTM D558 Moisture/density relationship of soils andsoil-cement mixturesSet 24355


ASTM D854 Determination of particle density of fine soils,small pyknometer methodSet 24115/1

ASTM D1194 Bearing capacity of soil for static load onspread footingsSet 29015

ASTM Test Sets

Buyer’s GuideIndex of ASTM Test Sets

30



ASTM D1556 Density of soil in place, sand cone methodSet 29055


ASTM D1558 Proctor Penetrometer Spring Type withAdaptor Stem, Needle points 1,3/4,1/2,1/3,1/5,1/10, 1/20 in2

area with Adaptor and CaseSet S1067

ASTM D1559 Resistance to plastic flow of bituminous mixtures(Marshall stability)Set 45135/1

ASTM D1754 Loss-on-heating/thin-film testSet 46065/1

ASTM D1883 CBR, laboratorySet 24485/1

ASTM D2166 Determination of unconfined compressive strengthSet 25075

ASTM D2167 Density of soil in place by the rubber balloonmethodSet 29065

ASTM D2172 Quantitive extraction of bitumen,centrifuge extractor, method ASet 45065/1

Quantitive extraction of bitumen,reflux extractor, method BSet 45075/1

ASTM D2216 Moisture content determination, oven methodSet 23055/1

ASTM D2419 Sand equivalent valueSet 24185/1

ASTM D3080 Direct/Residual Shear Apparatus, 60 mmSquare Specimen with Transducers for usewith ADU Logging SystemSet S1057

Direct shear test, 2.5 inch diameter specimenSet 26055/1

ASTM D3999 Cyclic Triaxial System for 100 mm dia samplesSet S1050

ASTM D4123 Dynamic Load Testing on Asphalt PavementMaterialsSet 45150/1

Dynamic Load Testing of Asphalt PavementMaterialsSet S1046


ASTM D4253 Maximum and minimum index density of soilsSet 24405/2

ASTM D4254 Maximum and minimum index density of soilsSet 24405/2

ASTM D4318 Determination of liquid limitSet 24025

Determination of plastic limit and plasticity indexSet 24045

ASTM D4429 CBR, in-situSet 24505

ASTM D4647 Determination of erodibility, pinhole methodSet 25045

ASTM D6307 Determination of Binder Content by theIgnition MethodSet 45080/1

ASTM E303 In-situ surface frictional propertiesSet 42355

Buyer’s GuideIndex of AASHTO Test Sets

31

AASHTO T4 Moisture/density relationship of soils andsoil-cement mixturesSet 24355

AASHTO T11 Materials finer than 75 µm sieve in mineralaggregate by washingSet 42085

AASHTO T23 Making/curing concrete specimensSet 34265

AASHTO T27 Sieve analysisSet 42075

AASHTO T49 Determination of penetrationSet 46105/1

AASHTO T51 Determination of ductility of bitumen orbituminous materialsSet 46035/1

AASHTO T53 Determination of softening point, ring and ballmethodSet 46086/1

AASHTO TP53 Determination of Binder Content by theIgnition MethodSet 45080/1

AASHTO T71 The effect of organic impurities in fine aggregateson strength of mortarSet 42295/1

AASHTO T72 Standard test method for Saybolt ViscositySet 46135/1

AASHTO T84 Specific gravity and absorption of fine aggregatesSet 42185

AASHTO T87 Dry preparation of soil samples for grain sizeanalysis and determination of soil constantsSet 23035

AASHTO T89 Determination of liquid limitSet 24025

AASHTO T90 Determination of plastic limit and plasticity indexSet 24045

AASHTO T92 Determination of shrinkage, limit, volumetricmethodSet 24065

AASHTO T96 Aggregate abrasion value using Los Angelesabrasion machineSet 42335/1


AASHTO T100 Determination of particle density of fine soils,small pyknometer methodSet 24115/1

AASHTO T104 Soundness of aggregates in sodium sulphate ormagnesium sulphateSet 42305/1

AASHTO T107 Expansion of Portland cementSet 38145/1

AASHTO T121 Weight per cubic metre of fresh concreteSet 34135

AASHTO T126 Making/curing concrete specimensSet 34265

AASHTO T146 Dry preparation of soil samples for grain sizeanalysis and determination of soil constantsSet 23035

AASHTO T153 Air permeability (fineness)Set 38025

AASHTO T154 Time of setting of hydraulic cement byGillmore needlesSet 38095

AASHTO T164 Quantitive extraction of bitumen,centrifuge extractor, method ASet 45065/1


AASHTO T191 Density of soil in place, sand cone methodSet 29055

AASHTO T197 Setting time by penetration resistanceSet 34075

AASHTO T205 Density of soil in place by the rubber balloonmethodSet 29065

AASHTO T245 Resistance to plastic flow of bituminous mixtures(Marshall stability)Set 45135/1

AASHTO Test Sets

Buyer’s GuideIndex of AFNOR, DIN and EN Test Sets

32

AFNOR P18-561 Determination of flakinessSet 42110

DIN 1048 Air content of fresh concrete, type B methodSet 34165

Determination of concrete impermeabilitySet 35410

Determination of flowSet 34055

DIN 4211 Consistency of fresh mortar and masonry cementSet 38100

EN 196-1 Preparation and testing of 40 x 40 x 160 mmmortar prisms,Set 39045/1

EN 196-3 Consistence and setting-timeSet 38065

Soundness of cement pasteSet 38135/1

EN 196-6 Air permeability (fineness)Set 38025

EN 413 Consistency of fresh mortar and masonry cementSet 38100


EN 450 Determination of pozzolanic activity indexSet 38370/1

EN 451 Fineness of fly ash (PFA) by wet sievingSet 38360

EN 459 Consistency of fresh mortar and masonry cementSet 38100


EN 933-1 Determination of particle size distributionSet 42065

EN 933-6 Determination of flakinessSet 42110

AFNOR, DIN and EN Test Sets

Buyers Guide

Documents

Transcript of Buyers Guide