Butterfly valve

1250-SERIES Electrically Operated Butterfly Valve Technical Specifications

Data Sheet Ref. No : SU-1250-00001

SUDE PUNE \ BANGALORE

MODEL NO.: 1250\200\WAF\CI\SG\BN\PN16 \LIN\SD-4000-20-E\POT\2LS\WCP \CPT200

Quotation Ref. No Quotation Date :

1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.

2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SG Iron Seating material Nitrile Flowing medium Water

Pressure 10 kg/cm2

Operating Angle 90*

Type of design PN16 Construction

Temperature Ambient

Characteristic Linear up to 60* Opening

Fitted with

Sdtork Make Three Phase Electrical Reversible Stayput Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Also Supplied With 3 Phase Panel Having Input Signal: 415 volts 3 Phase AC & 4-20mA Output Signal: 4-20mA

3. ACTUATOR DETAILS

4.1 Series

4000

4.2 Model SD-4000-20-E

4.3 Out Put motion. Quarter Turn

4.4 Rated output Torque – Kg-m 200 Nm

4.5 Effective Output Speed-RPM

1.24 RPM

4.6 Output coupling

E-Type

4.7 Diameter of stem As Per Valve Requirement

4.8 Stroke 0 - 90˚

4.9 Time of operations – Sec /90˚ 12 sec./90 deg.

4.10 Manual over-ride

Provided-Hand wheel with auto declutching arrangement

4.11 Travel Limit Switches

Qty : 2 nos., Contacts : Rating: 5A-250 VAC/0.46A-250VDC.

4.12 Torque Limit Switches.


4.13 Local Position Indicator.

Provided Continuous type.

4.14 Class of Protection.

IP67

4.15 Duty Regulating

4.16 Weight of the actuator. 50 kg’s

4.17 Mounting Dimensions

4.18

Area of Operation

4.19

Wiring Diagram

5 MOTOR DETAILS

5.1 Type. TEFC Induction Motor.

5.2 Supply 415 V AC 50 Hz 3 Phase

5.3 Duty Regulating

5.4 Insulation Class F

5.5 Rating

5 OPTIONAL ACCESSORIES

5.1

Feedback Potentiometer

Out put : 100-235 Ohms Provided

5.2

Additional Limit Switches

Qty : 2 nos. Type : 1 NO + 1 NC, Change over contact, Contact rating: 5 A, 230VAC

Provided

5.3

Two Wire Transmitter Type : Two wire, Actuator mounted Supply : 12-36 VDC, Output : 4-20 m A

Provided

5.4

Remote Position indicator

Available in servo controller Digital : 0-100 %

Provided

5.5

Servo controller (Valve positioner) Panel Mounted

Input signal : 4-20 m A, Output : 4-20 m A Feed back : 0-500 Ohms, supply 230 V AC, This will have auto calibration facility.

Provided

5.6 Interface Card Actuator Mounted

Input signal : 4-20 m A, Feed back : 100-235 Ohms,

Provided

5.6 Control Panel / Integral Starter

Integral starter inbuilt in panel Provided

5.7 Local Push Button Station

Provided

5.8

Space Heater Not Provided

5.9

Thermostat Not Provided

6. GENERAL POINTS

6.1 Scope Of Supply Actuator with above accessories

6.2 Inspection

By the Customer at our works

6.3 Test Certificates & Manuals

2 Sets with Unit

6.4 Warranty 18 months from the date of supply or 12 months from the date of installation whichever is earlier.

6.5 Painting RAL 5021

6.6 Packing Wooden Box packing – On demand

SPECIAL NOTES:

1250-SERIES Electrically Operated Butterfly Valve Technical Specifications


SUDE PUNE / BANGALORE

MODEL NO.: 1250\200\WAF\CI\SG\BN\PN16\ ONF\SD-4000-20-E\2LS

Quotation Ref. No Quotation Date :

1. ITEM Assembly Of 2 Way Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.

2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SG Iron Seating material Nitrile Flowing medium Water

Pressure 10 kg/cm2

Operating Angle 90*


Temperature Ambient

Characteristic On/Off Type

Fitted with

Sdtork Make Three Phase Electrical Reversible Stayput Type Actuator, Supply Voltage: 415 volts 3 Phase AC Actuator is in built with Local Position Indicator & Hand Wheel For manual Operation. Type Of Actuator: Splash Proof Direct on Valve, IP67 Construction. Supply Voltage: 415 volts 3 Phase AC .

3. ACTUATOR DETAILS

4.1 Series

4000

4.2 Model SD-4000-20-E




1.24 RPM

4.6 Output coupling

E-Type

4.7 Diameter of stem

As Per Valve Requirement

4.8 Stroke 0 - 90˚

4.9 Time of operations – Sec /90˚ 12 sec/90˚










IP67

4.15 Duty On/Off Type



4.18

Area of Operation

4.19

Wiring Diagram

5 MOTOR DETAILS





5.5 Rating 1 Hp


5.1



5.2



Provided

5.3


Not Provided

5.4



Not Provided

5.5



Not Provided



Not Provided


Integral starter inbuilt in control panel Not Provided


Not Provided

5.8


5.9


6. GENERAL POINTS


6.2 Inspection



2 Sets with Unit




SPECIAL NOTES:

1258-SERIES Electrically Operated Plastic Butterfly Valve Technical Specifications



MODEL NO.: 1258\200\WAF\PVC\PVC\E\PN16 \PROP\SD-4000-20-E\2LS\POT\CPT200\WCP

Quotation Ref. No. Quotation Date :

1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.

2. MAKE SUDE 3 APPLICATION Chemical Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material PVC Disc Material PVC Seating material EPDM Flowing medium Chemical

Pressure 10 kg/cm2

Operating Angle 90*


Temperature Ambient

Characteristic Proportionate

Fitted with


3. ACTUATOR DETAILS

4.1 Series

4000

4.2 Model SD-4000-20-E




1.24 RPM

4.6 Output coupling

E-Type



4.8 Stroke 0 - 90˚











IP67




4.18

Area of Operation

4.19

Wiring Diagram

5 MOTOR DETAILS





5.5 Rating 1 Hp


5.1



5.2



Provided

5.3


Provided

5.4



Inbuilt

5.5



Provided



Provided


Integral starter provided in the panel Provided


Provided

5.8


5.9


6. GENERAL POINTS


6.2 Inspection



2 Sets with Unit




SPECIAL NOTES:

1258-SERIES Electrically Operated Plastic Butterfly Valve Technical Specifications



MODEL NO.: 1258\200\WAF\PVC\PVC\E\PN16\ ONF\SD-4000-20-E\2LS

Quotation Ref. No. Quotation Date :

1. ITEM Assembly Of 2 Way Plastic Butterfly Valve Fitted With Sdtork Make 3 Phase Electrical Actuator.

2. MAKE SUDE 3 APPLICATION 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material PVC Disc Material PVC Seating material EPDM Flowing medium Chemical

Pressure 10 kg/cm2

Operating Angle 90*


Temperature Ambient

Characteristic On/Off Type

Fitted with


3. ACTUATOR DETAILS

4.1 Series

4000

4.2 Model SD-4000-20-E




1.24 RPM

4.6 Output coupling

E-Type



4.8 Stroke 0 - 90˚











IP67




4.18

Area of Operation

4.19

Wiring Diagram

5 MOTOR DETAILS





5.5 Rating 1 Hp


5.1


Out put : 100-235 Ohms Not Provided

5.2



Provided

5.3


Not Provided

5.4



Not Provided

5.5



Not Provided



Not Provided


Refer Basic Specification Sheet Not Provided


Refer Basic Specification Sheet Not Provided

5.8


5.9


6. GENERAL POINTS


6.2 Inspection



2 Sets with Unit




SPECIAL NOTES:

1260-SERIES Pneumatically Operated Butterfly Valve Technical Specifications

Data Sheet Ref. No :SU-1260-00001


MODEL NO.: 1260\200\WAF\CI\S6\BN\PN10\ LIN\DA20\EPPOS\PT-FB

Quotation Ref. No Quotation Date

1. ITEM Assembly of 2 Way Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator

2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SS316 Seating material Buna Nitrile Flowing medium Water

Pressure 10 Bar


Temperature 80oC

Characteristic Linear

Fitted with

Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean dry air

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Clean dry air 4.19 Opening and Closing Time 0.65 [Open] & 0.55 [Close]


5.1 2 Wire Position Transmitter

Provided

5.2 Siemens Electro Pneumatic Positioner

Having Input signal: 4-20mA & Output signal: 4-20mA, Inlet Pressure: 6 Bar, Quality of air: Filtered Dry & Clean Air.

Provided

6 GENERAL POINTS 6.1 Inspection By Customer at our works

6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of

installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :

1260-SERIES Pneumatically Operated Butterfly Valve Technical Specifications



MODEL NO.: 1260\200\WAF\CI\S6\BN\PN10\ONF\DA20\ 1184D\4W5P2PDCPOP\06\6.0\BSP\AL\S4\ BN\SPC1\230VAC\GP\ALR\AFR\WPLSB


1. ITEM Assembly of 2 Way Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator

2. MAKE SUDE 3 APPLICATION Water Industries 6 TECHNICAL SPECIFICATION OF 2 WAY BUTTERFLY VALVE Valve Size 200mm End connection Wafer, Flangeless Suitable for Holding between flanges Body Material Cast Iron Disc Material SS316 Seating material Buna Nitrile Flowing medium Water

Pressure 10 Bar


Temperature 80oC

Characteristic On / Off Type

Fitted with

Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing Time 0.65 [Open] & 0.55 [Close]


5.1 4 Way 5 Port 2 Position Double Coil Solenoid Valve

Of Size ¼”, Aluminum Body, BSP Screwed Having Coil voltage of 230 V AC in General Purpose Housing

Provided

5.2 Air Lock relay Of ¼” Size Provided 5.3 Air Filter Regulator Of ¼” Size Supplied With Gauges Provided 5.4 Weather Proof

Limit Switch Box Consisting of 2 nos micro switches having 1 NO + 1 NC Contacts for Sensing End Position of the Valve

Provided


6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of

installation which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :

1268-SERIES Pneumatically Operated Plastic Butterfly Valve Technical Specifications



MODEL NO.: 1268\200\WAF\PVC\PVC\E\LIN\DA20\EP POS\PT-FB


1. ITEM Assembly of 2 Way Plastic Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator


Pressure 10 Bar

Temperature 80oC

Characteristic Linear

Fitted with

Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered & Clean dry air

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered 4.19 Opening and Closing

Time 0.65 [Open] & 0.55 [Close]


5.1 Position Transmitter

Provided

5.2 Siemens make Electro Pneumatic Positioner

Having Input Signal: 60 PSI & 4-20mA, Output signal: 4-20mA

Provided


6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation

which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :

1268-SERIES Pneumatically Operated Plastic Butterfly Valve Technical Specifications



MODEL NO.: 1268\200\WAF\PVC\PVC\E\ONF\DA20\1184D\4W5P2PSCPOP\06\6.0\BSP\AL\S4\BN\SPC1\230VAC\GP\WPLSB


1. ITEM Assembly of 2 Way Plastic Butterfly Valve Fitted With Pneumatic Rotary Double Acting Actuator


Pressure 10 Bar

Temperature 80oC

Characteristic On / Off type

Fitted with

Sude Make Pneumatic DA20 Double Acting Actuator, Signal Pressure: 5.5 to 8.5 bar, Quality of air: Filtered and Lubricated

4 PNEUMATIC ACTUATOR DETAILS 4.1 Type Double 4.2 Model DA20 4.3 Spring Clip Steel 4.4 Double Acting Cap Aluminium Alloy 4.5 Cap O-Ring N.B.R 4.6 Piston Polyarilamide 4.7 Cylinder Aluminium Alloy 4.8 Washer Polyamide 4.9 Spring Clip Steel 4.9 Position Indicator Polyamide 4.10 Piston Guide Polyacetal 4.11 Guide Ring Polyacetal 4.12 Piston O-Ring N.B.R 4.13 O-Ring N.B.R 4.14 Springs Set DIN-17223-C 4.15 Spring Return Cap Aluminium Alloy 4.16 Shaft AISI-303 Stainless Steel 4.17 Signal Pressure 5.5 to 8.5 Bar 4.18 Quality Of Air Filtered and Lubricated 4.19 Opening and Closing

Time 0.65 [Open] & 0.55 [Close]


5.1 4 Way 5 Port Single coil 2 position poppet type solenoid valve

Of ¼” size having Aluminum body with Coil voltage of 230 V AC Supply

Provided

5.2 Weather Proof Limit switch box

Consisting of 2 nos micro switches having 1 NO + 1 NC contacts for sensing end position of the valve

Provided


6.2 T. C.& Manuals 2 Sets with unit 6.3 Warranty 18 months from the date of supply or 12 months from the date of installation

which ever is earlier. 6.4 Packing Thermo cool Packing Housed in corrugated Box

SPECIAL NOTE :

Butterfly valve

Business

Transcript of Butterfly valve