BUSTER Kennel Mats - jorvet.com · The BUSTER Kennel Mats have been designed to fit standard...

2
Instructions for Use The BUSTER Kennel Mats have been designed to fit standard kennel sizes. They are made of tough nylon that can be scrubbed and cleaned using all common veterinary disinfectants and parvocides. This helps reduce the need for conventional washing and tumble drying of bedding, hence reducing electricity usage. The BUSTER Kennel Mats eliminate the need to line kennels with newspaper and help reduce clinical waste. Inserting Gel Packs Each BUSTER Kennel Mat comes with one or more gel packs depending on size. Open the Velcro flap on one end of the mat. This will expose two zips. Unzip the zipper closest to the attachment of the flap. This will reveal a pocket running the length of the mat. Insert the activated and warmed/cooled gel pack(s) into the pocket. For the larger sizes of mat there are Velcro dividers in the main pocket that prevent the gel packs from rucking up. Once all the required gel packs have been inserted close the zipper and replace the Velcro flap. Cleaning Remove large amounts of debris or faecal material. The BUSTER Kennel Mat can be scrubbed with all the common veterinary disinfectants and parvocides. Once clean, rinse with clean water. Allow to drip dry. It is recommended that periodically the sealed foam pouch (accessed via the second zip under the Velcro flap) is removed and the BUSTER Kennel Mat cover soaked over night in disinfectant or parvocide. The cover should be rinsed thoroughly in clean water before being allowed to drip dry. Wipe the sealed foam pouch with disinfectant or parvocide. Re-insert the foam pouch into the cover. DO NOT MACHINE WASH THE COVER AS THIS WILL AFFECT ITS WATERPROOF PROPERTIES BUSTER Kennel Mats Jorgensen Laboratories Cat. No. Cat. No. Cat. No. Cat. No.

Transcript of BUSTER Kennel Mats - jorvet.com · The BUSTER Kennel Mats have been designed to fit standard...

Page 1: BUSTER Kennel Mats - jorvet.com · The BUSTER Kennel Mats have been designed to fit standard kennel sizes. They are made of tough nylon that can be scrubbed and cleaned using all

Instructions for Use The BUSTER Kennel Mats have been designed to fit standard kennel sizes. They are made of tough nylon that can be scrubbed and cleaned using all common veterinary disinfectants and parvocides. This helps reduce the need for conventional washing and tumble drying of bedding, hence reducing electricity usage. The BUSTER Kennel Mats eliminate the need to line kennels with newspaper and help reduce clinical waste.

Inserting Gel PacksEach BUSTER Kennel Mat comes with one or more gel packs depending on size. Open the Velcro flap on one end of the mat. This will expose two zips. Unzip the zipper closest to the attachment of the flap. This will reveal a pocket running the length of the mat. Insert the activated and warmed/cooled gel pack(s) into the pocket. For the larger sizes of mat there are Velcro dividers in the main pocket that prevent the gel packs from rucking up. Once all the required gel packs have been inserted close the zipper and replace the Velcro flap.

CleaningRemove large amounts of debris or faecal material.The BUSTER Kennel Mat can be scrubbed with all the common veterinary disinfectants and parvocides. Once clean, rinse with clean water. Allow to drip dry. It is recommended that periodically the sealed foam pouch (accessed via the second zip under the Velcro flap) is removed and the BUSTER Kennel Mat cover soaked over night in disinfectant or parvocide. The cover should be rinsed thoroughly in clean water before being allowed to drip dry. Wipe the sealed foam pouch with disinfectant or parvocide. Re-insert the foam pouch into the cover.

DO NOT MACHINE WASH THE COVER AS THIS WILL AFFECT ITS WATERPROOF PROPERTIES

BUSTER Kennel Mats

Jorgensen Laboratories

Cat. No. Cat. No. Cat. No. Cat. No.

Page 2: BUSTER Kennel Mats - jorvet.com · The BUSTER Kennel Mats have been designed to fit standard kennel sizes. They are made of tough nylon that can be scrubbed and cleaned using all

Activation of the BUSTER Gel Pack1. Remove the BUSTER Gel Pack from its packaging.2. Submerse in luke warm water.3. Squeeze vigorously under water.4. Continue for about 3 minutes or until the cells are fully expanded.

Alternatively the BUSTER Gel Pack can be placed in a washing machine on a rinse cycle. Multiple packs can be activated in this way.

After several uses the gel packs may need some reactivation. Should this be required, repeat steps 2-3.

Instructions for Use.Cold1. Make sure the activated BUSTER Gel Pack is free of moisture.2. Place flat in a freezer or the freezer compartment of a fridge. Leave for 24 hours or until the pack is sufficiently chilled.3. Place the frozen/chilled gel pack into the special pockets in the BUSTER Kennel Mats. Alternatively wrap in a towel if not using with the kennel mats. Do not allow the animal to come into direct contact with the freezer gel packs.

Hot1. Microwave on full power for 2 minutes.2. Check the temperature of the BUSTER Gel Pack at various sites. If still too cold microwave for a further 30 seconds. If too hot allow to cool before use.3. Place the BUSTER Gel Pack into the pockets in the BUSTER Kennel Mats. Alternatively wrap in a towel if not using with the BUSTER Kennel Mats. Do not allow the animal to come into direct contact with the BUSTER Gel Pack.

ALWAYS CHECK THE TEMPERATURE OF THE BUSTER GEL PACKS BEFORE USE. The gel packs are non toxic if consumed.

Jorgensen Laboratories