Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a...

6
Busbars for fire protection switches according to DIN VDE 0100-420:2016-02 Busbars for Arc Fault Detection Devices (AFDD) REACh www.ftg-germany.de

Transcript of Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a...

Page 1: Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing

Busbars for fire protection switches according to DIN VDE 0100-420:2016-02

Busbars for Arc FaultDetection Devices (AFDD)

REACh

www.ftg-germany.de

Page 2: Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing

Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing system is required under DIN VDE 0100-420:2016-02*. Electrical faults are amongst the commonest causes of fires, which may be triggered by damaged cable insulation, crushed wires, bent connectors, loose contactpoints or faulty terminal devices.

Protection against fire in the form of „Arc Fault Detection Devices“ (AFDD) is therefore required for low-voltage systems. These devices provide protection against the

occurrence of dangerous serial or parallel arc faults in single-phase alternating current systems with currents up to 16A.

At FTG, we feel obliged to play our part in protecting peopleand capital assets and preventing fires and have developedthe AFDD busbar, which is made from halogen-free material, especially for this purpose.

Providing all-round protection for safe connections!

Better safe than sorry!Busbars for AFDD

* Compulsory installation of fire protection switches in: companies with wood processing, paper or textile

factories

storage rooms with flammable materials

wooden houses and barns

airports

train stations

public buildings

museums

assisted living facilities such as day nurseries,

retirement homes,...

barriere-free facilities

distribution boards, whether for an widening,

modification or reinstallation

Field of application (recommended): Places with sleeping furniture

Facilities with lounges

Buildings with high fire load

Electrical circuit installations with a supply of large

numbers of connecting cables like kitchen appliances,

entertainment electronics, infotainment systems, etc.

Advantages of FTG-busbars for fire protection switches: clear and stable system

quicker installation to conventional wiring

high space-saving

halogen-free

Page 3: Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing

1 2

3 4

1. SKS1163, SKS1164 | 2. 3695S | 3. 31702, 31702B, AKL802-130SQI, AKL802-130SQIB | 4. 3695T

Page 4: Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing

Busbars for AFDD

31821 2-phase busbar, grey, L-design 38 | pin 10 mm² 10

3695S1 4-phase busbar, grey, L-design 36 | pin 10 mm² 10

3182T2 2-phase busbar, grey, T-design 38 | fork 10 mm² 10

3695T2 4-phase busbar, grey, T-design 36 | fork 10 mm² 10

3184S1 2-phase busbar, grey, L-design 30 | pin 10 mm² 10

3936S1 4-phase busbar, grey, L-design 30 | pin 10 mm² 10

31842 2-phase busbar, grey, T-design 30 | fork 10 mm² 10

3936T2 4-phase busbar, grey, T-design 30 | fork 10 mm² 10

3170Z1/3 1-phase busbar, grey, Z-design 28 | pin 10 mm² 10

3170ZB1/3 1-phase busbar, blue, Z-design 28 | pin 10 mm² 10

3210-DK1/3 3-phase busbar, grey, L-design behind 30 | pin 10 mm² 10

SKS 11631/3 3-phase busbar, grey, L-design behind 24 | pin 10 mm² 10

SKS 1164GY1/3 1-phase busbar, grey, Z-design 24 | pin 10 mm² 10

SKS 11641/3 1-phase busbar, blue, Z-design 24 | pin 10 mm² 10

Article No. Description Connections Cross section Qty

Article No. Description Connections Cross section Qty

Article No. Description Connections Cross section Qty

Article No. Description Connections Cross section Qty

AFDD-Busbars for FI/LS-switch 1+N (3 TE)

AFDD-Busbars for FI/LS-switch 1+N (3 TE) + 1 Hi4

AFDD-Busbars for LS-switch 1+N (2 TE)

AFDD-Busbars for LS-switch 1+ N (2 TE) + 1 Hi4

1 suitable for Siemens devices | 2 for Schrack- / Eaton-/Doepke-devices, Legrand | 3 for Schneider-devices, Legrand | 4 Hi = auxiliary switch after every AFDD

Page 5: Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing

Feeding terminals Packing unit 25 pcs.

design pin

connection horizontal

single / multi wire 6 - 25 mm²

fine stranded with ferrule 4 - 16 mm²

for LS 1+N:#802-130SQI#802-130SQI-blue

for FI/LS:#802-115SQI#802-115SQI-blue

Endcovers Packing unit 50 pcs.

Endcover for 3-phase busbar

#A1Endcover for 4-phase busbar

#A2Endcover for 1-phase busbar

#A11Endcover for 1-phase busbar

#A39

Protection cover Packing unit 50 pcs.

#BRL5

Accessoires

Page 6: Busbars for Arc Fault Detection Devices (AFDD) · 2018-03-19 · Since December 2017, the use of a fire protection switch when building new systems or expanding or modifying existing

FTG - Friedrich Göhringer Elektrotechnik GmbHGerwigstr. 8DE-78098 TribergGermanyTel.: +49 (0) 7722 96 36 0Fax: +49 (0) 7722 96 36 36www.ftg-germany.de

02.2

018

| © 2

018

Frie

dric

h Gö

hrin

ger E

lekt

rote

chni

k Gm

bH |

Subj

ect t

o te

chni

cal m

odifi

catio

ns a

nd e

rror

s. | w

ww

.ftg-

germ

any.d

e