Burner System for Rotary Kilns
-
Upload
mohammed-abdo -
Category
Documents
-
view
234 -
download
5
description
Transcript of Burner System for Rotary Kilns
7/16/2019 Burner System for Rotary Kilns
http://slidepdf.com/reader/full/burner-system-for-rotary-kilns 1/6
Burner Systems orRotary Kilns
7/16/2019 Burner System for Rotary Kilns
http://slidepdf.com/reader/full/burner-system-for-rotary-kilns 2/62
BURNER SYSTEMS foR RoTaRY kilNS
Adjustable Pilot Assembly
Outer Air Vane
2 Way adjustable burner mount
Gas Orce Ring
Spark Ignited Gas Pilot
Reractory Covered Stainless Steel Burner Pipe
Swirl Air
Oil Inlet
Gas Inlet Shape Air
State o the Art Burner Systems
The combustion system is a key element inecient thermal processing o ores, minerals, and
similar bulk solids in a rotary kiln. The processrequirements are stringent in a variety o thermal
processing systems such as in coke calcining,limestone calcining, recovery o lime in pulp mills,
and the combustion o wastes to name a ew.
The burner system is an important and an integral component o
a rotary kiln system to optimize the combustion o uels to releaseheat in the kiln.
Saety considerations, ease and exibility o operation, product
quality, energy eciency, maintenance costs, and the environ-
mental impact o the products o combustion are some o the
most critical areas that a kiln operator must evaluate in selecting a
kiln burner.
Metso, with over hal a century o experience in designing and
manuacturing rotary kiln-based thermal processing systems, has
the technical expertise and capability to provide rotary kiln opera-
tors with a kiln burner system that best meets their requirements.
Since 1950 Metso has successully engineered and supplied more
than 300 burner systems
Kiln Burners
– engineered or specic job requirementsAll burner systems are designed based on Metso’s vast burner
experience. When designing a burner system, Metso’s engineers
consider: the process, primary and secondary air momentum,
system temperature prole requirements, and emissions require-
ments. Reduced NOx emissions and optimum ame shape is
achieved with the use o two primary air chambers.
Multi-uel capability designed to handle gas, oil, pulverized•
coal, petroleum coke, or non-condensible gases separately or
in combination are available.
Flame is directional adjustable, and ame shape control is•
obtained by dual air channels.
7/16/2019 Burner System for Rotary Kilns
http://slidepdf.com/reader/full/burner-system-for-rotary-kilns 3/6
3
BURNER SYSTEMS foR RoTaRY kilNS
Metso can design a ring system or your application.
Engineered and custom designed valve trainsor sae, ecient, reliable combustion areprovided
Valve drains are pre-piped and pre-tested and shipped as anassembled module ready or connection to customer’s piping andwiring.
Engineered pump and heater sets or heavy oil service or or light
oil duty, in simplex or duplex models are available.
A typical gas valve train
Burner system management
Flame saeguard, and burner management systems are•
designed specically or applications to rotary kilns ring gas,
oil or solid uels.
Programmable Logic Controlled (PLC) systems perorm all•
required limit checking and operator input checking during
burner light-of.
Alpha-numerical message display on local ame saeguard•
panel guides operators through burner start-up procedure.
Remote start/stop capabilities can be provided to the plant•
Distributed Control System (DCS).
Typical burner management system
Low primary air design is used to maximize uel eciency and•
energy recovery rom auxiliary cooling devices.
Design eatures include mechanical or steam atomization o oil•
and sturdy, rugged construction or high temperature duty.
Burner systems range from preheat to 300 MBtu/hr. (315 GJ/hr.).•
Systems provide increased diagnostics and ease o operation,•
exibility and space savings.
Systems conorm to FM, CSA, Ontario Hydro, NFPA, and IRI.•
7/16/2019 Burner System for Rotary Kilns
http://slidepdf.com/reader/full/burner-system-for-rotary-kilns 4/64
BURNER SYSTEMS foR RoTaRY kilNS
Burner combustion system
The Metso combustion system is designed with the
exibility to suit the ollowing specifc kiln fring
applications:
Wide selection o components including burner,•
primary air an, uel valve trains, pumps and
heater sets, fame management system with panel.
Single or multiple uels.•
Steam or mechanical uel oil atomization.•
Maximum fame shape and locationcontrol or optimum kiln perormance
Based on the extensive feld experience o Metso
engineers, the critical actors o ame shape and
location to complement kiln internals is applied to
burner design.
Burner design eatures include single or dual primary
air path, dual (axial and radial) natural gas paths,easily changeable uel oil nozzle, adjustable uel
nozzle to primary air nozzle relationship, and easily
adjustable burner mount and primary air ow.
The Metso Non-Condensible Gas (NCG)
The NCG incineration gun is a separately mounted and
separately aimable assembly to conorm with our experi-
ence that NCG introduction via the main kiln burner is
detrimental to main ame development and space
controls, as well as to overall process control. Separate NCGintroduction and placement o the NCG stream in relation
to the main ame enables proper main ame develop-
ment and achievement o peak temperature, resulting in
stable kiln operation and maximum incineration o the
NCG’s thus minimizing TRS emissions.
NCG incineration gun eatures include separate gas paths
or each NCG stream to be incinerated, outer cooling air
path, 316 stainless steel construction or parts in contact
with NCG’s, 304 stainless steel outer cooling air blast pipe
with 3” thick insulating castable lining, anged connec-
tions or NCG and cooling air paths, mounting ange withadjusting mounting screws, and a cooling air an.
A typical pulverized fuel/gas burner
7/16/2019 Burner System for Rotary Kilns
http://slidepdf.com/reader/full/burner-system-for-rotary-kilns 5/6
5
BURNER SYSTEMS foR RoTaRY kilNS
7/16/2019 Burner System for Rotary Kilns
http://slidepdf.com/reader/full/burner-system-for-rotary-kilns 6/6
Mets Crprtn, Fabianinkatu 9 A, P.O. Box 1220, FI-00101 Helsinki, Finland, tel. +358 20 484 100, ax +358 20 484 101, www.metso.com
Subject to alteration without prior notice Brochure No. 1534-06-09-MBL/Danville-English © 2009 Metso Printed in Sweden
www.metso.com
E-mail: [email protected]
• Metso Minerals Industries Inc., 350 Railroad Street, Danville, PA 17821-2046 USA
Phone: +1 570 275 3050, Fax: +1 570 275 6789
• Metso Minerals Industries Inc., P.O. Box 15312, York, Pennsylvania, 17405-7312 USA
Phone: +1 717 843 8671, Fax: +1 717 845 5154
• Metso Minerals Canada Inc., 1197 Ballantry Road, Oakville, ON L6H 5M7, Canada
Phone: +1 905 337 8811, Fax: +1 905 337 8827
• Metso Minerals (Brasil) Ltda., Av. Independéncia, 2.500 Éden, 18087-050 Sorocaba, SP, Brazil
Phone: +55 15 219 1300, Fax: +55 15 219 1699
• Metso Minerals (Chile) SA, Avda Vitacura 4380, 5th oor, Vitacura, Santiago, Chile
Phone: +56 2 3702000, Fax: +56 2 3702039
• Metso Minerals (UK) Ltd, 2 Lindenwood, Crockord Lane, Chineham Business Park, Basingstoke, Hampshire RG24 8QY, UK
Phone: +44 (0) 1256 37620, Fax +44 (0) 1256 376221
• Metso Minerals (Johannesburg) (Pty) Ltd, Private Bag X2006, Isando, Johannesburg, 1600, South Arica,
Phone: +27 11 397 5090, Fax: +27 11 397 5826
• Metso Minerals (Asia-Pacic), Level 2, 1110 Hay Street, West Perth, WA 6005, Australia
Phone: +61 8 9420 5555, Fax: +61 8 9320 2500
• Metso Minerals (Sala) AB, Norrängsgatan 2, SE-733 38 Sala, Sweden
Phone: +46 224 374 00, Fax: +46 224 169 69