BUILT-IN SERIES - Sub-Zero

D E S I G N G U I D E

B U I L T- I N S E R I E S

E F F E C T I V E 1 / 4 / 2 0 1 7

TA B L E O F C O N T E N T S

3 B U I LT- I N R E F R I G E R AT I O N

8 S TA N D A R D I N S TA L L AT I O N

12 F L U S H I N S E T I N S TA L L AT I O N

28 S U B - Z E R O W A R R A N T I E S

Features and specifications are subject to change at any time without notice.

Throughout this guide, dimensions may vary by ± 3 mm.

| 3 subzero-wolf.com.au

BUILT-IN REFRIGERATION

Built-In Refrigeration

Sub-Zero designers and engineers continue to perfect the built-in line. The addition of LED lighting throughout and several new models with internal water dispensers, along with the same advanced food preservation technology Sub-Zero is known for, make the built-in line nothing short of revolutionary.

BUILT-IN MODELS

ICBBI-36R

ICBBI-36F

ICBBI-36UID

ICBBI-36UFDID

ICBBI-36S

ICBBI-42S

ICBBI-42SD

ICBBI-48S

ICBBI-48SID

ICBBI-48SD

ICBBI-42UFDID


Overall Dimensions

ALL REFRIGERATOR | ALL FREEZER

Overall dimensions are based on stainless steel models. For flush inset applications, add minimum 13 mm to door clearance dimensions.

Model ICBBI-36R, ICBBI-36F.


914 mm

2134mm

102 mm

1873mm

606mm

946mm

359 mm

606 mm

60 mm

HEIGHT DIMENSIONS ± 13 mm

665 mm

OVER-AND-UNDER

Model ICBBI-36UID.

914 mm

2134mm

102 mm

1289mm

584mm

606mm

600mm 946

mm

606 mm

60 mm


665 mm

359 mm



Model ICBBI-36UFDID.

914 mm

2134mm

102 mm

1289mm

584mm

606mm

600mm

495mm

203mm

606 mmHEIGHT DIMENSIONS ± 13 mm

60 mm

665 mm

Overall Dimensions

OVER-AND-UNDER

Model ICBBI-42UFDID.

1067 mm

2134mm

102 mm

1289mm

584mm

606mm

565mm

229mm

606 mmHEIGHT DIMENSIONS ± 13 mm

60 mm

665 mm

600mm



Model ICBBI-36S.

914 mm

2134mm

102 mm

1873mm

606mm

565mm

184mm

222mm

606 mm

60 mm


665 mm

Overall Dimensions

SIDE-BY-SIDE

Model ICBBI-42S, ICBBI-42SD.

1067 mm

2134mm

102 mm

1873mm

606 mm

606mm

668mm

264mm

191mm

60 mm


665 mm



Overall Dimensions

SIDE-BY-SIDE

Model ICBBI-48S, ICBBI-48SID, ICBBI-48SD.

1219 mm

2134mm

102 mm

1873mm

606 mm

606mm

762mm

295mm

213mm

60 mm


665 mm

Specifications

INTERIOR CAPACITY

ALL REFRIGERATOR | ALL FREEZER R (L)* F (L)*

ICBBI-36R 613ICBBI-36F 612

OVER-AND-UNDER R (L) F (L)

ICBBI-36UID 367 143ICBBI-36UFDID 357 144ICBBI-42UFDID 420 220

SIDE-BY-SIDE R (L) F (L)

ICBBI-36S 328 225ICBBI-42S 430 220ICBBI-42SD 408 194ICBBI-48S 500 264ICBBI-48SID 491 244ICBBI-48SD 478 244

*Useable volume based on ISO 15502



Opening Dimensions

STANDARD INSTALLATION

2127 mmOPENINGHEIGHT

620 mmOPENING

DEPTH

NOTE: Shaded line represents profile of unit.

FRONT VIEWSIDE VIEW

TOP VIEW

WOPENING WIDTH

OPENING WIDTH W

ICBBI-36R, ICBBI-36F 902 mm

ICBBI-36UID, ICBBI-36UFDID, ICBBI-36S 902 mm

ICBBI-42UFDID, ICBBI-42S, ICBBI-42SD 1054 mm

ICBBI-48S, ICBBI-48SID, ICBBI-48SD 1206 mm

If two units are installed side by side, refer to page 9 for dual standard installations.

Side-by-side and French door models can not be dual installed with a dual installation kit or any other model. A 51mm filler strip must be used.



Opening Dimensions

DUAL STANDARD INSTALLATION

2127 mmOPENINGHEIGHT

620 mmOPENING

DEPTH

NOTE: Shaded line represents profile of unit.

FRONT VIEWSIDE VIEW

TOP VIEW

WOPENING WIDTH

OPENING WIDTH W

Two 914 mm Models 1822 mm

A dual installation kit will be required for this installation.



FRONT VIEW

1918 mmFROMFLOOR

178mm E

152mm2,200 mm

minimumFROM

FLOOR

1.

2. 2.

pressurelimiting valve

6mm flexi hose& tape to wall

& floor.

pressurelimiting valve

6mm flexi hose& tape to wall

& floor.

1.

DIRECTION. Ensure water connection is ½” BSP male

Planning information


PANEL REQUIREMENTS

PANEL WEIGHT MAX

ICBBI-36R, ICBBI-36F 34 kgAll Other Models 23 kgGrille Panel 6 kg

PANEL THICKNESS MIN

All Panels 16 mm


6mm3

mm

FLUSH INSETPANEL

SPACERPANEL

BACKERPANEL

19mm

typical

��

��

��

��

application.

��



Opening Dimensions

FLUSH INSET INSTALLATION

FLUSH INSET WIDTH W

ICBBI-36R, ICBBI-36F 965 mm

ICBBI-36UID, ICBBI-36S 965 mm

ICBBI-42S 1118 mm

ICBBI-48S, ICBBI-48SID, ICBBI-48SD 1270 mm

Dimensions assume a 19 mm panel thickness.

If two units are installed side by side, refer to page 18 for dual flush inset installations.

2134 mmFLUSHINSET

HEIGHT

6 mm

675 mmFLUSHINSETDEPTH 56

mm

*76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry.

NOTE: Shaded line represents profile of unit with19 mm panel.

FRONT VIEWSIDE VIEW

TOP VIEW

FINISHEDCLEATS*

32 mm

WFLUSH INSET WIDTH

102 mm

32mm

56mm

76 mm*

TYPICAL



Custom Panels

FLUSH INSET PANELS

The flush inset application is an overlay model with flush inset panels. It is not a separate model.

The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel. Refer to the illustrations for overlay panels. Panels must be fixed together prior to installation.

For flush inset panels thicker than 19 mm, a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this guide.

When installing two units side by side, refer to page 18 for dual flush inset installations.

ICE | WATER DISPENSER

For model ICBBI-48SD, the refrigerator door panel must include a cut-out to accommodate the external dispenser. The thickness of the panel in this area can range from 6 mm to a maximum of 29 mm. Refer to the illustrations below.

160 mm

2 mm

3 mmRADIUS

16 mm

327mm

51mm

25mm

HANDLE

GLASSWELL

Dispenser dimensions.

Handle placement.



Flush Inset Panel Dimensions

MODEL ICBBI-36R, ICBBI-36F

REFRIGERATOR | FREEZER W H

Flush Inset Panel 940 mm 1772 mmSpacer Panel 892 mm 1751 mmBacker Panel 908 mm 1767 mm

GRILLE W H


MODEL ICBBI-36UID

REFRIGERATOR W H


FREEZER W H


GRILLE W H


H

H

H

W

AA

B

B

H

H

W

H

H

W

H

H

W

AA

A

B

H

H

H

W

H

W

H

H

WW

B

A

H

H

W

W W

H

H

H

W

AA

B

B

H

H

W

H

H

W

H

H

W

AA

A

B

H

H

H

W

H

W

H

H

WW

B

A

H

H

W

W W

ICBBI-36R, ICBBI-36F

ICBBI-36UID



Flush Inset Panel Dimensions

MODEL ICBBI-36S

REFRIGERATOR W H


FREEZER W H


GRILLE W H


MODEL ICBBI-42S

REFRIGERATOR W H


FREEZER W H


GRILLE W H


MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD

REFRIGERATOR W H


FREEZER W H


GRILLE W H


DISPENSER ( ICBBI-48SD) W H

Cut-Out 149 mm 316 mmA B

Cut-Out Location 51 mm 732 mm

Grille panel dimensions are for standard 2134 mm overall unit height.

H

H

H

W

AA

A

A

H

H

W

H

H

W

H

H

W

AA

A

B

H

H

H

W

H

W

H

H

WW

B

A

H

H

W

W W

H

H

H

W

AA

A

A

H

H

W

H

H

W

H

H

W

AA

A

B

H

H

H

W

H

W

H

H

WW

B

A

H

H

W

W W

ICBBI-36S, ICBBI-42S, ICBBI-48S, ICBBI-48SID

ICBBI-48SD



Flush Inset Panels

PANEL OFFSET

The illustrations provide panel offsets and reveals for built-in models in a flush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

ALL REFRIGERATOR | ALL FREEZER ILLUS

Door | Grille Sides AGrille Top CGrille Bottom | Door Top DDoor Bottom F

OVER-AND-UNDER ILLUS

Door | Drawer | Grille Sides AGrille Top CGrille Bottom | Door Top DDoor Bottom | Drawer Top EDrawer Bottom F

SIDE-BY-SIDE ILLUS

Doors (hinge) | Grille Sides ADoors (handle) Sides BGrille Top CGrille Bottom | Door Top DDoor Bottom F

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR

DOOR / DRAWER / GRILLE

13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

Illus. A

Illus. B

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

Illus. C

Illus. D

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

Illus. E

Illus. F



Dual Installation

If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 51 mm filler strip is recommended between units. A custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer.

WITHOUT FILLER STRIP FILLER STRIP

Opposite hinges.

Same side hinges.



Opening Dimensions

DUAL FLUSH INSET INSTALLATION

2134 mmFLUSHINSET

HEIGHT

6 mm

675 mmFLUSHINSETDEPTH 56

mm

*76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry.

NOTE: Shaded line represents profile of unit with19 mm panel.

FRONT VIEWSIDE VIEW

TOP VIEW

FINISHEDCLEATS*

32 mm

WFLUSH INSET WIDTH

102 mm

32mm

56mm

76 mm*

TYPICAL

FLUSH INSET WIDTH W

Two 914 mm Models 1886 mm

Dimensions assume a 19 mm panel thickness. A dual installation kit will be required for this installation.



Dual Flush Inset Panel Dimensions

MODEL ICBBI-36R, ICBBI-36F

REFRIGERATOR | FREEZER W H


GRILLE W H


MODEL ICBBI-36UID

REFRIGERATOR W H


FREEZER W H


GRILLE W H


Grille panel dimensions are for standard 2134 mm overall unit height. For dual wide grilles, refer to page 21.

H

H

H

W

AA

B

B

H

H

W

H

H

W

H

H

W

AA

A

B

H

H

H

W

H

W

H

H

WW

B

A

H

H

W

W W

H

H

H

W

AA

B

B

H

H

W

H

H

W

H

H

W

AA

A

B

H

H

H

W

H

W

H

H

WW

B

A

H

H

W

W W

ICBBI-36R, ICBBI-36F

ICBBI-36UID



Dual Installation

DUAL FLUSH INSET PANEL OFFSET

The illustrations provide panel offsets and reveals for built-in models in a dual flush inset application. Refer to the chart below for reference to the illustrations.

PANEL OFFSET

ALL REFRIGERATOR | ALL FREEZER ILLUS

Door (hinge) | Grille Sides ADoor (handle) Sides BGrille Top CGrille Bottom | Door Top DDoor Bottom F

OVER-AND-UNDER ILLUS

Door (hinge) | Drawer | Grille Sides ADoor (handle) Sides BGrille Top CGrille Bottom | Door Top DDoor Bottom | Drawer Top EDrawer Bottom F

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

DUALTRIM

6 mmREVEAL

8 mm3 mm

DOOR DOOR

TOP VIEW

Illus. A

Illus. B

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

Illus. C

Illus. D

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

16mm

16 mm

8 mm13mm

4mm

8mm

8mm

2mm

DOOR

DRAWER

8mm

2mm

DOOR /DRAWER

13 mm

2mm

8mm

8mm

4mm

GRILLE

DOOR

6 mmREVEAL

8 mm3 mm

FLUSH INSET PANEL

SPACER

BACKERDOOR DOOR


13 mm

8mm

3mm

CABINETRY

GRILLE

TOP VIEWTOP VIEW

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

CABINETRY

Illus. E

Illus. F


Dual Installation

DUAL WIDE GRILLE

A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit.

For flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 2134 mm finished height.


DUAL WIDE GRILLE—FLUSH INSET

TWO 914 mm MODELS W H



Side Panel

The custom side panels must be a minimum of 610 mm deep and 13 mm thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below.

When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer.

2134mm

610 mm

ROUT TO5 mm

(OVER-AND-UNDERMODELS)

OPTIONALTOE KICKCUT-OUT

102 mm

521mm

146mm

48 mm

25 mm

108 mm

ROUT TO 3 mm

FRONTOF SIDEPANEL

67mm

MAINFRAME

SIDE PANELROUTING

25 mm48 mm

3 mm

13 mm

Side panel dimensions.

Routing detail.


Standard Handles

Optional stainless steel tubular and pro handles are avail-able through an authorized Sub-Zero dealer.

Refer to the chart below for standard handle lengths for built-in models.

HANDLE LENGTH TUBULAR PRO

Full Door 1622 mm 1147 mm

Over-and-Under Door 1124 mm 952 mm

914 mm Drawer 770 mm 600 mm

1067 mm Drawer 922 mm 753 mm


Overlay | Flush Inset Panels

FULL-SCALE TEMPLATE

Overlay and flush inset panels must be a minimum of 16 mm thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.


Overlay and flush inset panel thickness.

6 mm BACKER PANEL

DOOR

DEPTH OF TUBULARAND PRO HANDLES

25mm

76mm

32 mm PANEL

25 mm PANEL

19 mm PANEL

51mm

3 mm SPACER PANEL



606 mmTO REAR OF UNIT

OVERALL WIDTH OF UNIT

32 mm

38 mm

44 mm

0 mm

25 mm

51 mm

57 mm

63 mm

70 mm

76 mm

83 mm

89 mm

6 mm

13 mm

19 mm

19 mmTHICK OVERLAY PANEL

(TYPICAL)

6 mmBACKER PANEL

25 mmTHICK PANEL

25 mm0

SCALE

90° door opening (top view).

Overlay Application

FULL-SCALE TEMPLATE



32 mm

ASSUMES19 mm

FLUSH INSETPANEL

THICKNESS

56 mm

610 mmTO BACK WALL

19 mmTHICK FLUSH INSET PANEL

(TYPICAL)

6 mmBACKER PANEL

25 mmTHICK PANEL

25 mm0

SCALE

110° door opening (top view).

Flush Inset Application

FULL-SCALE TEMPLATE

For panels thicker than 19 mm, a 90° door stop may be required to prevent interfer-ence with adjacent cabinets.



32 mm

FILLER STRIP

APPROX PROFILE OFSTAINLESS STEEL WRAPPED

DOOR AND HANDLE

DOOROPEN 110°

DOORCLOSED

Dual standard installation (top view).

Dual Standard Installation

FULL-SCALE TEMPLATE

Typical overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

25 mm0

SCALE



38 mm

13 mm

FILLER STRIP

PROFILE OF 19 mm FLUSH INSET PANELAND TUBULAR HANDLE

DOORCLOSED

DOOROPEN 110°

Dual flush inset installation (top view).

Dual Flush Inset Installation

FULL-SCALE TEMPLATE

Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop.

25 mm0

SCALE


Sub-Zero International Limited Warranty

FOR RESIDENTIAL USE

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec-tive in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.

For more information regarding your Sub-Zero product warranty, contact your authorized Sub-Zero dealer. Warranties must comply to all country, state, city, local and or ordinance.

*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.

*Replacement water filters and air purification cartridges are not covered by the product warranty.

Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf & Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design, are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries. All other trademarks are property of their respective owners in the United States and other countries.

S U B Z E R O - W O L F . C O M . A U

Bank House, 11 – 19 Bank Place.

Melbourne Victoria Australia 3000

Telephone 03 9600 2218

[email protected]

BUILT-IN SERIES - Sub-Zero

Documents

Transcript of BUILT-IN SERIES - Sub-Zero