Build Your Own Fiber Laser - NufernBuild Your Own Fiber Laser • US patent 7,400,812 & others...
2
For many years Nufern & its diverse partners have enhanced high power Large Mode Area fiber laser and amplifier technology for the benefit of all manner of optical fiber applications. The tools developed and used in our own labs provide scientists, engineers, and technicians apparatus to safely and easily obtain the best optical results, reuse valuable fibers, and easily adjust and adapt key performance parameters necessary to understand and develop products. This set of tools is now made available as a kit or in parts to all experimenters & educators. Consisting of a patented inverted coil form set capable of low stress holding & easy loading 5, 10, or 15 m of fiber, a termination device for fibers emitting more than milliwatts, and key optical components which may be required to make lasers and amplifiers such as Bragg reflectors and cladding light strippers. OPTICAL FIBERS – FIBER GYRO COILS – DEFENSE TECHNOLOGY – FIBER LASERS & AMPLIFIERS Build Your Own Fiber Laser www.nufern.com
Transcript of Build Your Own Fiber Laser - NufernBuild Your Own Fiber Laser • US patent 7,400,812 & others...
866.466.0214 | www.nufern.com
For many years Nufern & its diverse partners have enhanced high power Large Mode Area fiber laser and amplifier technology for the benefit of all manner of optical fiber applications. The tools developed and used in our own labs provide scientists, engineers, and technicians apparatus to safely and easily obtain the best optical results, reuse valuable fibers, and easily adjust and adapt key performance parameters necessary to understand and develop products. This set of tools is now made available as a kit or in parts to all experimenters & educators. Consisting of a patented inverted coil form set capable of low stress holding & easy loading 5, 10, or 15 m of fiber, a termination device for fibers emitting more than milliwatts, and key optical components which may be required to make lasers and amplifiers such as Bragg reflectors and cladding light strippers.
O P T I C A L F I B E R S – F I B E R G Y R O C O I L S – D E F E N S E T E C H N O L O G Y – F I B E R L A S E R S & A M P L I F I E R S
Build Your Own Fiber Laser
www.nufern.com
7 Airport Park Road, East Granby, CT 06026 Toll Free: 866.466.0214 | Tel: 860.408.5000 | Fax: 860.844.0210 | www.nufern.com NU232-11/15
®
Build Your Own Fiber Laser
• US patent 7,400,812 & others pending
• Uses the inherent straightening force generated within a bent fiber to gently but firmly contact heat rejecting active fiber to a heat sink
• Keeps heat rejecting coils of fiber out of thermal contact with other fibers & inhibits optical communication from wrap to wrap
• Is easily loaded and unloaded for the benefit of experimenters
• Available in 5, 10 or 15m capacities
• Both SM and LMA fiber coupled cladding light strippers available
• Capable (with heat sink) of sustained high powers (20W for 130 µm fiber and 200W for 400 µm fiber)
• Convenient pedestal package
• Wavelength matching HR & output coupling device
• Matched fo Nufern active fibers; both SM & LMA versions stocked
• High power handling: <30W for 8/130 gratings; <500W for 20/400
Fiber Bragg Reflector
• Large anvil for absorbing rejected heat from fiber
• Large shield face absorbs reflected power from meter & protects fiber
• Finger shelf for easy and repeatable loading
• Spring loaded for fast and easy “no-tool” use
Bench Top FiberTermination Device
Coil Form &Loading Tool Kit
Cladding Light Stripper
Pedestal mounted for easy coil loading and unloading
