ORIENT Technologies bv a subsidiary of SNBC of Weihai/China

www.orient-technologies.com

ORIENT Technologies b.v. Meerheide 115, 5521 DX Eersel, The NetherlandsPhone +31 (0)497 331080, Fax +31 (0)497 386430

BT-T080R

Standard features at a glance:Specially designed for unattended printing applicationHang arm paper holder designHigh-speed printing (150 mm/s)Paper roll up to 180 mmAuto paper loading/auto cutterModular design, easy to use and maintain

Applications:ATM/EFT

Information kiosksTest equipment terminal

Data communication terminal

•

•••••

KIOSKThermal printer

The specifications are subject to change without notice and shall not be regarded as a warranty. All product and company names are trademarks, service marks or registered trademarks of their respective owners.

ORIENT Technologies bvMeerheide 115, 5521 DX Eersel, The NetherlandsPhone: +31 (0)497 331080, Fax: +31 (0)497 386430www.orient-technologies.com

BT-T080RKiosk thermal printer

Print Print Method Direct Thermal printing Resolution 203 DPIPrint width 80 mm (Max.) Print speed 150 mm/sMemory RAM: 2MB, FLASH:1M/2MB/4MB (optional)Sensors Paper load sensor, Black Mark sensor, Paper near end sensor,

paper end sensorInterface USB, USB+Serial, Parallel Barcodes Fonts Graphics Bar Code Supported 1D: UPC-A, UPC-E, EAN-8, EAN-13, CODABAR, CODE39, ITF,

CODE128, CODE93 2D: PDF417

Fonts Font A (12 x 24), Font B (9 x 17) Kanji Font A: 24 x 24

Character modification Rotate(0°,90°,180°,270°), enlarges(1-6X), emphasize, under-line, reverse

Graphic printing Support BMP bit image download to RAM,FLASH and direct BMP print Paper Paper type Continuous paper, Paper with black markPaper thickness 0.06~0.10 mmPaper width 48~82.5 mm, continuously adjustmentPaper roll OD 80~180 mm (Max.)Paper roll ID Φ12.5, ΦΦ18, Φ25.4, Φ40mmPaper cut Full cut, Partial cut

Optional module Anti-pulling paper & anti-jamming module, paper outlet with LED module

Paper holder Hang arm paper holder (can be installed in rotated direction) Power supply Input 100~240 VAC, 50~60 HzOutput 24±5%V DC, 2.5A (Printing duty 25%) Reliability Printer head lifetime ≥100Km (standard test sample with 12.5% duty ratio)Cutter lifetime 1,500,000 cuts (standard thermal paper, 60g/m2) Environment Operating conditions 5°C to 45°C, 20% to 90%RH (40°C) Storage conditions -40°C to 60°C, 20% to 93%RH (40°C) Physics Spec. Dimensions 204(L) X 154 (W) X 122.4(H) mmWeight Approx. 1.5 kg (without paper roll)

Certification CE, CB