BT-311-Exchangers Shell & Tube
Transcript of BT-311-Exchangers Shell & Tube
-
8/12/2019 BT-311-Exchangers Shell & Tube
1/6
To: Date: Revision:
Inquiry No.: Inquiry Revision:
Project No: Client: Plant Site:
Description:
Item No's.:
The attached bid evaluation and vendor recommendation are for the following quotations:
Technically Acceptable
Evaluated Bids Quote No. Yes No
1.
2.
3.
4.
5.
Quotations are NOT technically acceptable because of the following reasons:
Recommended Vendor(s):
Reasons for Recommendation:
Vendor's Technical Clarifications:
Other Comments:
Please complete your commercial evaluation for submittal to Client A.S.A.P.
Distribution:
Project Manager: (Name) Originator
Project Engineer: (Name) Lead Mechanical Engineer
(Name)
(Name)
Technical Bid Evaluation for Shell & Tube Exchangers
File: 232493894.xls.ms_office, Sheet: Tech. Evalu. (4/98) Page 1 of 6
-
8/12/2019 BT-311-Exchangers Shell & Tube
2/6
Summary of Bids for Shell & Tube
Project Number: Date: General Notes:
Inquiry Number: Rev. No.: 1. Shaded areas are Technically Unacceptable Inquiry Revision Number: Engineer: (Name) 2. ARO = After Receipt of Order.
** = Data furnished by Vendor 3. ARAD = After Receipt of Approved Drawings.
Client: Plant Site: ~ = Data not specified by Vendor.
No. Item No. / Service
1234 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
26 27 28 29
31 Base Price
32 Price Add for - 100% Spare Gaskets 33 Price Add for - Surface Preparation and Painting 34 35
36 Total Price37 Estimated Freight Price (Total per Unit) 38 Total Evaluated Price
39 Shipping Weight, lbs. (Total per Unit)40 Shipping Terms (F.O.B.)41 e very, ee s raw ngs qu pment
42 Recommended Vendor (YES)
File: 232493894.xls.ms_office, Sheet: Summary (4/98)
-
8/12/2019 BT-311-Exchangers Shell & Tube
3/6
Technic
Project Number: Date: GENERAL NOT
Inquiry Number: Rev. No.: 1. Shaded area
Inquiry Revision Number: Engineer: (Name) 2. ARO = After
Item Number: (input) ** = Data furnished by Vendor 3. ARAD = Afte
Client: Plant Site: ~ = Data not specified by Vendor.
No. Description Unit Specification
1 No. of Shells / Size / TEMA Type (input) (input) (input)
2 Arrangement / Effective Area per Shell & Unit Sq. Ft. xP X xS (input) (input)
3 Heat Duty, Btu/Hr / Corrected LMTD, F (input) (input)
4 U-Service / U-Clean (input) (input)
5 PERFORMANCE OF ONE UNIT Shell Tube Shell Tube Shell
6 Fluid Name (input) (input)
7 Flow Rate Lbs/Hr (input) (input)
8 Temperature - Inlet F (input) (input)
9 Temperature - Outlet F (input) (input)
10 Fouling Resistance Hr Ft F/Bt (input) (input)
11 Pressure Drop Psi (input) (input)
12 Velocity Ft/Sec (input) (input)
13 CONSTRUCTION DATA Shell Tube Shell Tube Shell
14 Pressure - Design / Test Psig xxx/Code xxx/Code
15 Temperature- Design / MDMT F xxx/xxx xxx/xxx
16 No. Passes per Shell (input) (input)
17 Corrosion Allowance In (input) (input)
18 Shell Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
19 Shell Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
20 Tube Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
21 Tube Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
22
23 Shell - O.D. / I.D. In (input) (input)
24 Tubes - Number / Nominal Length Ft (input) (input)
25 Tubes - O.D. / Wall Thickness In (input) (input)
26 Tubes - Arrangement / Pitch In (input) (input)
27 Baffle - Type / % Cut / Pitch In (input) (input) (input)
28 Impingement Protection (Yes / No) (input)
29 Tube to Tubesheet Joints (Rolled, Seal/Strength Welded) (input)
30
31 Material - Shell (input)
32 Material - Tube (input)
33 Material - Channel & Channel Covers (input)
34 Material - Tubesheets (input)
35 Material - Gaskets - Shellside / Tubeside (input) (Input)
36 Material - Expansion Joint (F&F, Bellows, Ends) (input)
37
38 Radiography - Shellside / Tubeside (input) (input)
39 API-660 / TEMA Class (input) (input)
40 ASME Code Design / ASME Code Stamp YES YES
41 Guarantees - Thermal / Hydraulic YES YES
42 Guarantees - Mechanical / Vibration YES YES
43 Shipping Weight lbs. ** 44
45 TECHNICALLY ACCEPTABLE (YES / NO)
46 Recommended Vendor (YES / NO)
File: 232493894.xls.ms_office, Sheet: Item No.
-
8/12/2019 BT-311-Exchangers Shell & Tube
4/6
Technic
Project Number: Date: GENERAL NOT
Inquiry Number: Rev. No.: 1. Shaded area
Inquiry Revision Number: Engineer: (Name) 2. ARO = After
Item Number: (input) ** = Data furnished by Vendor 3. ARAD = Afte
Client: Plant Site: ~ = Data not specified by Vendor.
No. Description Unit Specification
1 No. of Shells / Size / TEMA Type (input) (input) (input)
2 Arrangement / Effective Area per Shell & Unit Sq. Ft. xP X xS (input) (input)
3 Heat Duty, Btu/Hr / Corrected LMTD, F (input) (input)
4 U-Service / U-Clean (input) (input)
5 PERFORMANCE OF ONE UNIT Shell Tube Shell Tube Shell
6 Fluid Name (input) (input)
7 Flow Rate Lbs/Hr (input) (input)
8 Temperature - Inlet F (input) (input)
9 Temperature - Outlet F (input) (input)
10 Fouling Resistance (input) (input)
11 Pressure Drop Psi (input) (input)
12 Velocity Ft/Sec (input) (input)
13 CONSTRUCTION DATA Shell Tube Shell Tube Shell
14 Pressure - Design / Test Psig xxx/Code xxx/Code
15 Temperature- Design / MDMT F xxx/xxx xxx/xxx
16 No. Passes per Shell (input) (input)
17 Corrosion Allowance In (input) (input)
18 Shell Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
19 Shell Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
20 Tube Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
21 Tube Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
22
23 Shell - O.D. / I.D. In (input) (input)
24 Tubes - Number / Nominal Length Ft (input) (input)
25 Tubes - O.D. / Wall Thickness In (input) (input)
26 Tubes - Arrangement / Pitch In (input) (input)
27 Baffle - Type / % Cut / Pitch In (input) (input) (input)
28 Impingement Protection (Yes / No) (input)
29 Tube to Tubesheet Joints (Rolled, Seal/Strength Welded) (input)
30
31 Material - Shell (input)
32 Material - Tube (input)
33 Material - Channel & Channel Covers (input)
34 Material - Tubesheets (input)
35 Material - Gaskets - Shellside / Tubeside (input) (Input)
36 Material - Expansion Joint (F&F, Bellows, Ends) (input)
37
38 Radiography - Shellside / Tubeside (input) (input)
39 API-660 / TEMA Class (input) (input)
40 ASME Code Design / ASME Code Stamp YES YES
41 Guarantees - Thermal / Hydraulic YES YES
42 Guarantees - Mechanical / Vibration YES YES
43 Shipping Weight lbs. ** 44
45 TECHNICALLY ACCEPTABLE (YES / NO)
46 Recommended Vendor (YES / NO)
File: 232493894.xls.ms_office, Sheet: Item No. (2)
-
8/12/2019 BT-311-Exchangers Shell & Tube
5/6
Technic
Project Number: Date: GENERAL NOT
Inquiry Number: Rev. No.: 1. Shaded area
Inquiry Revision Number: Engineer: (Name) 2. ARO = After
Item Number: (input) ** = Data furnished by Vendor 3. ARAD = Afte
Client: Plant Site: ~ = Data not specified by Vendor.
No. Description Unit Specification
1 No. of Shells / Size / TEMA Type (input) (input) (input)
2 Arrangement / Effective Area per Shell & Unit Sq. Ft. xP X xS (input) (input)
3 Heat Duty, Btu/Hr / Corrected LMTD, F (input) (input)
4 U-Service / U-Clean (input) (input)
5 PERFORMANCE OF ONE UNIT Shell Tube Shell Tube Shell
6 Fluid Name (input) (input)
7 Flow Rate Lbs/Hr (input) (input)
8 Temperature - Inlet F (input) (input)
9 Temperature - Outlet F (input) (input)
10 Fouling Resistance (input) (input)
11 Pressure Drop Psi (input) (input)
12 Velocity Ft/Sec (input) (input)
13 CONSTRUCTION DATA Shell Tube Shell Tube Shell
14 Pressure - Design / Test Psig xxx/Code xxx/Code
15 Temperature- Design / MDMT F xxx/xxx xxx/xxx
16 No. Passes per Shell (input) (input)
17 Corrosion Allowance In (input) (input)
18 Shell Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
19 Shell Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
20 Tube Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
21 Tube Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
22
23 Shell - O.D. / I.D. In (input) (input)
24 Tubes - Number / Nominal Length Ft (input) (input)
25 Tubes - O.D. / Wall Thickness In (input) (input)
26 Tubes - Arrangement / Pitch In (input) (input)
27 Baffle - Type / % Cut / Pitch In (input) (input) (input)
28 Impingement Protection (Yes / No) (input)
29 Tube to Tubesheet Joints (Rolled, Seal/Strength Welded) (input)
30
31 Material - Shell (input)
32 Material - Tube (input)
33 Material - Channel & Channel Covers (input)
34 Material - Tubesheets (input)
35 Material - Gaskets - Shellside / Tubeside (input) (Input)
36 Material - Expansion Joint (F&F, Bellows, Ends) (input)
37
38 Radiography - Shellside / Tubeside (input) (input)
39 API-660 / TEMA Class (input) (input)
40 ASME Code Design / ASME Code Stamp YES YES
41 Guarantees - Thermal / Hydraulic YES YES
42 Guarantees - Mechanical / Vibration YES YES
43 Shipping Weight lbs. ** 44
45 TECHNICALLY ACCEPTABLE (YES / NO)
46 Recommended Vendor (YES / NO)
File: 232493894.xls.ms_office, Sheet: Item No. (3)
-
8/12/2019 BT-311-Exchangers Shell & Tube
6/6
Technic
Project Number: Date: GENERAL NOT
Inquiry Number: Rev. No.: 1. Shaded area
Inquiry Revision Number: Engineer: (Name) 2. ARO = After
Item Number: (input) ** = Data furnished by Vendor 3. ARAD = Afte
Client: Plant Site: ~ = Data not specified by Vendor.
No. Description Unit Specification
1 No. of Shells / Size / TEMA Type (input) (input) (input)
2 Arrangement / Effective Area per Shell & Unit Sq. Ft. xP X xS (input) (input)
3 Heat Duty, Btu/Hr / Corrected LMTD, F (input) (input)
4 U-Service / U-Clean (input) (input)
5 PERFORMANCE OF ONE UNIT Shell Tube Shell Tube Shell
6 Fluid Name (input) (input)
7 Flow Rate Lbs/Hr (input) (input)
8 Temperature - Inlet F (input) (input)
9 Temperature - Outlet F (input) (input)
10 Fouling Resistance (input) (input)
11 Pressure Drop Psi (input) (input)
12 Velocity Ft/Sec (input) (input)
13 CONSTRUCTION DATA Shell Tube Shell Tube Shell
14 Pressure - Design / Test Psig xxx/Code xxx/Code
15 Temperature- Design / MDMT F xxx/xxx xxx/xxx
16 No. Passes per Shell (input) (input)
17 Corrosion Allowance In (input) (input)
18 Shell Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
19 Shell Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
20 Tube Nozzles - Inlet (Size / Rating / Type) (input) (input) (input)
21 Tube Nozzles - Outlet (Size / Rating / Type) (input) (input) (input)
22
23 Shell - O.D. / I.D. In (input) (input)
24 Tubes - Number / Nominal Length Ft (input) (input)
25 Tubes - O.D. / Wall Thickness In (input) (input)
26 Tubes - Arrangement / Pitch In (input) (input)
27 Baffle - Type / % Cut / Pitch In (input) (input) (input)
28 Impingement Protection (Yes / No) (input)
29 Tube to Tubesheet Joints (Rolled, Seal/Strength Welded) (input)
30
31 Material - Shell (input)
32 Material - Tube (input)
33 Material - Channel & Channel Covers (input)
34 Material - Tubesheets (input)
35 Material - Gaskets - Shellside / Tubeside (input) (Input)
36 Material - Expansion Joint (F&F, Bellows, Ends) (input)
37
38 Radiography - Shellside / Tubeside (input) (input)
39 API-660 / TEMA Class (input) (input)
40 ASME Code Design / ASME Code Stamp YES YES
41 Guarantees - Thermal / Hydraulic YES YES
42 Guarantees - Mechanical / Vibration YES YES
43 Shipping Weight lbs. ** 44
45 TECHNICALLY ACCEPTABLE (YES / NO)
46 Recommended Vendor (YES / NO)
File: 232493894.xls.ms_office, Sheet: Item No. (4)