BS SERIES corrected - MAD Elevator · PDF fileBS Series Pushbutton General: Vandal Proof...
2
PUSHBUTTONS BS Series MAD ELEVATOR FIXTURES 115 City View Drive Etobicoke, Ontario M9W 5A8, Canada 1-866-957-8500 (416) 245-8500 (416) 245-8502 Fax [email protected] www.madfixtures.com MAD’s BS Series Pushbutton is vandal-proof, machine-turned stainless steel with an illuminated ring. Buttons may be paired with a large selection of Braille tag options for different effect Studless Mounting u u Vandal Proof Stainless Steel or PVD Brass, non-tarnishing finish u LED Illumination available in Red, Amber, Blue, Green and White u Classic Disc Moon California 110714BS
Transcript of BS SERIES corrected - MAD Elevator · PDF fileBS Series Pushbutton General: Vandal Proof...
PUSHBUTTONS
BSSeries
MAD ELEVATOR FIXTURES115 City View DriveEtobicoke, OntarioM9W 5A8, Canada
1-866-957-8500(416) 245-8500
(416) 245-8502 [email protected]
www.madfixtures.com
MAD’s BS Series Pushbutton is vandal-proof, machine-turned stainless steel with an
illuminated ring. Buttons may be paired with a large selection of Braille tag options
for different effect
Studless MountinguuVandal Proof
Stainless Steel or PVD Brass, non-tarnishing finishuLED Illumination available in Red, Amber, Blue, Green and Whiteu
ClassicDiscMoonCalifornia
110714BS
BS Series Pushbutton
General: Vandal Proof Studless Frontal Mounting Stainless Steel Pushbutton. Fastened by jam-nut on plates from 11 to 22 Gauge thick Pressel: AISI 303 turned Stainless Steel (standard or PVD-coated finishes) Pressel activation is limited by Stainless Steel base in Pressel. This prevents any stress on contact block resulting in a extremely robust vandal-proof pushbutton.
Contacts: Available with one or two microswitch (2NO/1NÑ)
Wiring: Screw terminals or JST Pin Connector
Voltage: Multivolt: 6V to 120 V AC/DC, 24V AC/DC
Illumination: LED-illumination of ring in Red, Amber, Blue, Green and White Stroke: 0.040”
Avg. life: 1,500,000 activations
Degree of protection: IP54
0.83”
1.1
8”
1”
1.2
5”
1”
1.2
5”
Classic
Disc
Moon
0.20”
0.14”
0.15”1”
1.2
5”
Illumination0 - No IlluminationA - AmberB - BlueR - RedG - GreenW - White
BS
1.57”
2.75”
GENERAL DETAILS
PHYSICAL CHARACTERISTICS MOUNTING REQUIREMENTS
Cutout
Minimum Spacing
COMPONENT ORDERING INFORMATION
X X F
Complete Assembly
X X X .00
Voltage4 - 24V AC/DCM - Multivolt 6V-120V AC/DC0 - No Illumination
StyleC - ClassicD - DiscM - MoonR - California
FinishV - Stainless SteelY - PVD Brass
Contact0 - No Contact3 - 1 Contact (Microswitch)
4 - 2 Contact (Microswitch)
BSX X F
Pressel Only
0 0 0 .00
StyleC - ClassicD - DiscM - MoonR - California
FinishV - Stainless SteelY - PVD Brass
Illumination0 - No IlluminationA - AmberB - BlueR - RedG - GreenW - White
BS0 0 0
Contact Only
X X X .01
Voltage4 - 24V AC/DCM - Multivolt 6V-120V AC/DC0 - No Illumination
Contact0 - No Contact3 - 1 Contact (Microswitch)
4 - 2 Contact (Microswitch)
1.4
5”
Adaptor ring for Ø 1.38” Cutouts
X
WiringM - Screw TerminalsC - JST Connector
0 X
WiringM - Screw TerminalsC - JST Connector
110714BS
1”
1.2
5”
0.21”California
