BS Code Guide
-
Upload
melvinbvaldevieso6896 -
Category
Documents
-
view
1.032 -
download
2
Transcript of BS Code Guide
BS EN ISO 21670 ................................................17BS EN ISO 23953 ................................................22BS EN 25580 ......................................................17DD ENV 1591 .....................................................10BS ISO 76 ...........................................................22BS ISO 113 .........................................................22BS ISO 155 .........................................................22BS ISO 199 .........................................................22BS ISO 254 .........................................................22BS ISO 461 .........................................................17BS ISO 1122 .......................................................22BS ISO 1919 .......................................................22BS ISO 2344 .......................................................22BS ISO 2534 .......................................................22BS ISO 2704 .......................................................22BS ISO 4010 .......................................................22BS ISO 4126 .......................................................12BS ISO 4411 .......................................................12BS ISO 5389 .......................................................22BS ISO 5391 .......................................................22BS ISO 6264 .......................................................22BS ISO 6535 .................................................12, 19BS ISO 6621 .......................................................22BS ISO 6622 .......................................................22BS ISO 6624 .......................................................22BS ISO 6966 .......................................................23BS ISO 6968 .......................................................23BS ISO 7063 .......................................................23BS ISO 7146 .......................................................12BS ISO 7654 .......................................................23BS ISO 8404 .......................................................23BS ISO 8443 .......................................................23BS ISO 9981 .......................................................23BS ISO 9982 .......................................................23BS ISO 10054 .....................................................23BS ISO 10129 .....................................................12BS ISO 11500 .....................................................12BS ISO 11901 .....................................................23BS ISO 12140 .....................................................23BS ISO 12745 .....................................................14BS ISO 13203 .....................................................23BS ISO 13357 .....................................................23BS ISO 13556 .....................................................23BS ISO 14469 .....................................................23BS ISO 14681 .....................................................23BS ISO 14794 .....................................................23BS ISO 15312 .....................................................23BS ISO 16860 .....................................................23BS ISO 16915 .....................................................23BS ISO 17080 .....................................................23BS ISO 17559 .....................................................24BS ISO 17584 .....................................................24BS ISO 18084 .....................................................24BS ISO 18653 .....................................................24BS ISO 19438 .....................................................24BS ISO 21009 .....................................................14BS ISO 24347 .....................................................24BS ISO 26322 .....................................................14BS 2A 296 ..........................................................24BS A 305 ............................................................24BS 4G 173 ..........................................................24BS 2G 219 ..........................................................24BS 2M 52 ...........................................................24BS M 55 .............................................................24BS M 57 .............................................................24BS M 61 .............................................................24BS M 66 .............................................................24BS HC 404 ..........................................................18BS 3SP 89 ...........................................................24BS AU 259 ..........................................................24
BS EN 60289 ......................................................11BS EN 60317 ......................................................11BS EN 60491 ......................................................19BS EN 60730 ................................................11, 19BS EN 61300 ......................................................12BS EN 61754 ......................................................12BS EN 61810 ......................................................19BS EN 61970 ......................................................12BS EN 61996 ......................................................12BS EN 62031 ......................................................12BS IEC 60870 ......................................................14DD IEC/PAS 62396 ..............................................14DD IEC/PAS 62588 ..............................................14DD IEC/TS 62396 ................................................14
EngineeringBS 4361 ..............................................................19BS 5655 ..............................................................17BS 6607 ..............................................................20BS 6916 ........................................................12, 19BS 7020 ..............................................................20BS 7745 ..............................................................20DD CEN/TS 15053 ..............................................17DD CEN ISO/TS 21432 ........................................17BS EN 444 ..........................................................16BS EN 462 ..........................................................16BS EN 583 ..........................................................16BS EN 1124 ..........................................................8BS EN 1301 ........................................................10BS EN 1330 ........................................................16BS EN 1518 ........................................................16BS EN 1591 ........................................................10BS EN 1593 ........................................................16BS EN 1715 ........................................................10BS EN 1779 ........................................................16BS EN ISO 2342 ..................................................16BS EN ISO 3452 ..................................................16BS EN ISO 3953 ..................................................20BS EN ISO 4026 ..................................................16BS EN ISO 4027 ..................................................16BS EN ISO 4028 ..................................................16BS EN ISO 4029 ..................................................16BS EN ISO 4126 ..................................................20BS EN ISO 4934 ..................................................20BS EN ISO 7048 ..................................................16BS EN ISO 10664 ................................................16BS EN ISO 10806 ................................................20BS EN 12223 ......................................................16BS EN 12409 ......................................................10BS EN 12421 ......................................................16BS EN 12543 ......................................................16BS EN 12544 ................................................16, 17BS EN 12679 ......................................................17BS EN 13068 ......................................................17BS EN 13348 ......................................................10BS EN 13802 ......................................................21BS EN 13925 ......................................................17BS EN 13927 ......................................................17BS EN 13957 ......................................................10BS EN 13958 ......................................................11BS EN 14096 ......................................................17BS EN 14218 ......................................................17BS EN 14219 ......................................................17BS EN ISO 14935 ................................................21BS EN ISO 15065 ................................................17BS EN 15093 ......................................................11BS EN 15094 ......................................................11BS EN 15272 ......................................................11BS EN ISO 16047 ................................................17BS EN ISO 20783 ................................................21
The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.
Building and civil engineering
BS 598 ..........................................................15, 18BS 4211 ..............................................................15BS 6088 ..............................................................17BS 6282 ..............................................................18BS 7412 ..............................................................19BS 8100 ..............................................................16BS 8110 ..............................................................18BS 8493 ................................................................8DD 213 ...............................................................18BS EN 975 ..........................................................20BS EN 1917 ........................................................15BS EN 12273 ......................................................10BS EN 12808 ......................................................10BS EN ISO 13789 ................................................10BS EN 13959 ................................................15, 18BS EN 13990 ......................................................21BS EN 14076 ......................................................21BS EN 14317 ......................................................11BS EN 14451 ................................................15, 18BS EN 15603 ......................................................11DD ENV 14464 ...................................................21BS ISO 29470 .....................................................14PD CEN/TR 15728 ...............................................14
Consumer products and servicesBS 969 ..................................................................8BS 4540 ..............................................................19BS 4585 ..............................................................19BS EN 1116 ........................................................20BS EN 1177 ..........................................................8BS EN 1957 ........................................................20BS EN 13721 ......................................................21BS EN 13722 ......................................................21BS EN 14073 ......................................................21BS EN 14074 ......................................................21BS EN 15570 ......................................................11BS ISO 5 .............................................................22BS ISO 762 .........................................................22BS ISO 763 .........................................................22BS ISO 855 .........................................................22BS ISO 2173 .......................................................22BS ISO 2240 .......................................................22BS ISO 3519 .......................................................22BS ISO 3761 .......................................................22BS ISO 8899 .......................................................23BS ISO 8900 .......................................................23BS ISO 9848 .......................................................23BS ISO 14717 .....................................................14BS ISO 16067 .....................................................23BS ISO 16212 .....................................................14BS ISO 18929 .....................................................24BS ISO 18938 .....................................................14BS ISO 20462 .....................................................24BS ISO 21093 .....................................................24BS ISO 21390 .....................................................24BS ISO 22234 .....................................................24
ElectrotechnicalBS 697 ................................................................17BS 5266 ................................................................8BS 7288 ..............................................................16BS EN 13757 ......................................................10BS EN 60065 ......................................................19BS EN 60076 ......................................................11BS EN 60255 ......................................................11
British Standards – Quick Reference Guide
4 Update Standards Dec 2008Prices may be subject to change.
BIP 2139 .............................................................15BIP 2181 .............................................................15DD 213 ...............................................................18DD CEN/TS 15053 ..............................................17DD CEN ISO/TS 21432 ........................................17DD CEN ISO/TS 27687 ........................................14BS EN ISO 105 ....................................................20BS EN ISO 150 ....................................................20BS EN 444 ..........................................................16BS EN 462 ..........................................................16BS EN 583 ..........................................................16BS EN 589 ............................................................8BS EN ISO 648 ................................................8, 18BS EN 725 ............................................................8BS EN ISO 787 ....................................................20BS EN 927 ............................................................8BS EN 975 ..........................................................20BS EN 1018 ..........................................................8BS EN 1019 ..........................................................8BS EN 1116 ........................................................20BS EN 1124 ..........................................................8BS EN 1177 ..........................................................8BS EN ISO 1248 ..................................................20BS EN 1301 ........................................................10BS EN 1330 ........................................................16BS EN 1518 ........................................................16BS EN 1591 ........................................................10BS EN 1593 ........................................................16BS EN 1715 ........................................................10BS EN 1779 ........................................................16BS EN 1917 ........................................................15BS EN 1957 ........................................................20BS EN ISO 2342 ..................................................16BS EN ISO 2360 ..................................................20BS EN ISO 3175 ..................................................20BS EN ISO 3262 ..................................................20BS EN ISO 3382 ..................................................10BS EN ISO 3452 ..................................................16BS EN ISO 3953 ..................................................20BS EN ISO 4026 ..................................................16BS EN ISO 4027 ..................................................16BS EN ISO 4028 ..................................................16BS EN ISO 4029 ..................................................16BS EN ISO 4126 ..................................................20BS EN ISO 4618 ..................................................20BS EN ISO 4684 ..................................................20BS EN ISO 4934 ..................................................20BS EN ISO 6401 ..................................................10BS EN ISO 7048 ..................................................16BS EN ISO 8502 ..................................................18BS EN ISO 10081 ....................................15, 19, 20BS EN ISO 10664 ................................................16BS EN ISO 10806 ................................................20BS EN ISO 10931 ................................................21BS EN ISO 11890 ................................................10BS EN 12223 ......................................................16BS EN 12273 ......................................................10BS EN 12409 ......................................................10BS EN 12421 ......................................................16BS EN 12475 ......................................................19BS EN 12543 ......................................................16BS EN 12544 ................................................16, 17BS EN 12563 ................................................11, 19BS EN 12679 ......................................................17BS EN 12808 ......................................................10BS EN 12882 ......................................................10BS EN 12911 ......................................................10BS EN 13068 ......................................................17BS EN 13348 ......................................................10BS EN 13721 ......................................................21
BS EN ISO 21181 ................................................22BS EN ISO 21182 ................................................22BS EN ISO 21183 ................................................22DD ENV 927 .........................................................8BS ISO 124 ...................................................12, 18BS ISO 1170 .......................................................12BS ISO 1505 .......................................................22BS ISO 2385 .......................................................22BS ISO 6743 .......................................................22BS ISO 8007 .......................................................23BS ISO 8008 .......................................................23BS ISO 9276 .......................................................12BS ISO 9588 .......................................................12BS ISO 9947 .......................................................23BS ISO 10059 .....................................................23BS ISO 10458 .....................................................23BS ISO 10952 .....................................................12BS ISO 14595 .....................................................17BS ISO 15112 .....................................................14BS ISO 15237 .....................................................23BS ISO 15238 .....................................................23BS ISO 15970 .....................................................14BS ISO 17455 .....................................................24BS ISO 17470 .....................................................17BS ISO 18114 .....................................................17BS ISO 18573 .....................................................24BS ISO 19334 .....................................................24BS ISO 20203 .....................................................24BS ISO 20508 .....................................................24BS ISO 22029 .....................................................24BS ISO 22493 .....................................................14BS ISO 23380 .....................................................14PD ISO/TR 11150 ................................................14
Alpha-numeric sequence of BritishStandards quoted in this issue
BS 598 ..........................................................15, 18BS 697 ................................................................17BS 969 ..................................................................8BS 1583 ..........................................................8, 18BS 3483 ........................................................19, 20BS 4211 ..............................................................15BS 4361 ..............................................................19BS 4540 ..............................................................19BS 4585 ..............................................................19BS 5072 ..............................................................20BS 5266 ................................................................8BS 5655 ..............................................................17BS 5724 ..............................................................18BS 6057 ........................................................12, 18BS 6088 ..............................................................17BS 6282 ..............................................................18BS 6607 ..............................................................20BS 6902 ........................................................11, 18BS 6916 ........................................................12, 19BS 7020 ..............................................................20BS 7083 ..............................................................17BS 7288 ..............................................................16BS 7412 ..............................................................19BS 7445 ..............................................................16BS 7745 ..............................................................20BS 8100 ..............................................................16BS 8110 ..............................................................18BS 8493 ................................................................8BS 25999 ..............................................................8BS 31100 ..............................................................8BIP 0026 .............................................................15BIP 0096 .............................................................15BIP 2034 .............................................................15BIP 2082 .............................................................15
Health and environment
BS 5724 ..............................................................18BS 6902 ........................................................11, 18BS 7445 ..............................................................16BS EN ISO 3382 ..................................................10BS EN 12563 ................................................11, 19BS EN 15004 ................................................11, 19BS EN 15446 ......................................................11BS EN ISO 21535 ..........................................11, 19BS EN 45502 ................................................11, 18BS EN 60601 ......................................................18BS ISO 5667 .......................................................12BS ISO 14520 ...............................................11, 19
Information systems
BS 7083 ..............................................................17BS EN ISO 18104 ................................................21BS EN ISO 19112 ................................................21BS EN ISO 19133 ................................................21BS EN ISO 19135 ................................................21BS ISO/IEC 7816 .................................................23BS ISO/IEC 11694 ...............................................14BS ISO/IEC 13249 ...............................................23BS ISO 19128 .....................................................24PD ISO/IEC TR 90005 ..........................................14
Materials and chemicals
BS 1583 ..........................................................8, 18BS 3483 ........................................................19, 20BS 5072 ..............................................................20BS 6057 ........................................................12, 18DD CEN ISO/TS 27687 ........................................14BS EN ISO 105 ....................................................20BS EN ISO 150 ....................................................20BS EN 589 ............................................................8BS EN ISO 648 ................................................8, 18BS EN 725 ............................................................8BS EN ISO 787 ....................................................20BS EN 927 ............................................................8BS EN 1018 ..........................................................8BS EN 1019 ..........................................................8BS EN ISO 1248 ..................................................20BS EN ISO 2360 ..................................................20BS EN ISO 3175 ..................................................20BS EN ISO 3262 ..................................................20BS EN ISO 4618 ..................................................20BS EN ISO 4684 ..................................................20BS EN ISO 6401 ..................................................10BS EN ISO 8502 ..................................................18BS EN ISO 10081 ....................................15, 19, 20BS EN ISO 10931 ................................................21BS EN ISO 11890 ................................................10BS EN 12475 ......................................................19BS EN 12882 ......................................................10BS EN 12911 ......................................................10BS EN ISO 14419 ................................................21BS EN ISO 15236 ................................................21BS EN 15688 ......................................................11BS EN ISO 15732 ................................................21BS EN ISO 15874 ................................................21BS EN ISO 15875 ................................................21BS EN ISO 15876 ................................................21BS EN ISO 17834 ................................................21BS EN ISO 18756 ................................................21BS EN ISO 18757 ................................................21BS EN ISO 19954 ................................................21BS EN ISO 21178 ................................................21BS EN ISO 21179 ................................................21BS EN ISO 21180 ................................................21
Update Standards Dec 2008 Prices may be subject to change. 5
British Standards – Quick Reference Guide continued...
BS ISO 14520 ...............................................11, 19
BS ISO 14595 .....................................................17
BS ISO 14681 .....................................................23
BS ISO 14717 .....................................................14
BS ISO 14794 .....................................................23
BS ISO 15112 .....................................................14
BS ISO 15237 .....................................................23
BS ISO 15238 .....................................................23
BS ISO 15312 .....................................................23
BS ISO 15970 .....................................................14
BS ISO 16067 .....................................................23
BS ISO 16212 .....................................................14
BS ISO 16860 .....................................................23
BS ISO 16915 .....................................................23
BS ISO 17080 .....................................................23
BS ISO 17455 .....................................................24
BS ISO 17470 .....................................................17
BS ISO 17559 .....................................................24
BS ISO 17584 .....................................................24
BS ISO 18084 .....................................................24
BS ISO 18114 .....................................................17
BS ISO 18573 .....................................................24
BS ISO 18653 .....................................................24
BS ISO 18929 .....................................................24
BS ISO 18938 .....................................................14
BS ISO 19128 .....................................................24
BS ISO 19334 .....................................................24
BS ISO 19438 .....................................................24
BS ISO 20203 .....................................................24
BS ISO 20462 .....................................................24
BS ISO 20508 .....................................................24
BS ISO 21009 .....................................................14
BS ISO 21093 .....................................................24
BS ISO 21390 .....................................................24
BS ISO 22029 .....................................................24
BS ISO 22234 .....................................................24
BS ISO 22493 .....................................................14
BS ISO 23380 .....................................................14
BS ISO 24347 .....................................................24
BS ISO 26322 .....................................................14
BS ISO 29470 .....................................................14
BS IEC 60870 ......................................................14
DD IEC/PAS 62396 ..............................................14
DD IEC/PAS 62588 ..............................................14
DD IEC/TS 62396 ................................................14
PD CEN/TR 15728 ...............................................14
PD ISO/TR 11150 ................................................14
PD ISO/IEC TR 90005 ..........................................14
BS 2A 296 ..........................................................24
BS A 305 ............................................................24
BS 4G 173 ..........................................................24
BS 2G 219 ..........................................................24
BS 2M 52 ...........................................................24
BS M 55 .............................................................24
BS M 57 .............................................................24
BS M 61 .............................................................24
BS M 66 .............................................................24
BS HC 404 ..........................................................18
BS 3SP 89 ...........................................................24
BS AU 259 ..........................................................24
PAS 67 ................................................................15
PAS 220 ..............................................................15
DD ENV 1591 .....................................................10DD ENV 14464 ...................................................21BS ISO 5 .............................................................22BS ISO 76 ...........................................................22BS ISO 113 .........................................................22BS ISO 124 ...................................................12, 18BS ISO 155 .........................................................22BS ISO 199 .........................................................22BS ISO 254 .........................................................22BS ISO 461 .........................................................17BS ISO 762 .........................................................22BS ISO 763 .........................................................22BS ISO 855 .........................................................22BS ISO 1122 .......................................................22BS ISO 1170 .......................................................12BS ISO 1505 .......................................................22BS ISO 1919 .......................................................22BS ISO 2173 .......................................................22BS ISO 2240 .......................................................22BS ISO 2344 .......................................................22BS ISO 2385 .......................................................22BS ISO 2534 .......................................................22BS ISO 2704 .......................................................22BS ISO 3519 .......................................................22BS ISO 3761 .......................................................22BS ISO 4010 .......................................................22BS ISO 4126 .......................................................12BS ISO 4411 .......................................................12BS ISO 5389 .......................................................22BS ISO 5391 .......................................................22BS ISO 5667 .......................................................12BS ISO 6264 .......................................................22BS ISO 6535 .................................................12, 19BS ISO 6621 .......................................................22BS ISO 6622 .......................................................22BS ISO 6624 .......................................................22BS ISO 6743 .......................................................22BS ISO 6966 .......................................................23BS ISO 6968 .......................................................23BS ISO 7063 .......................................................23BS ISO 7146 .......................................................12BS ISO 7654 .......................................................23BS ISO/IEC 7816 .................................................23BS ISO 8007 .......................................................23BS ISO 8008 .......................................................23BS ISO 8404 .......................................................23BS ISO 8443 .......................................................23BS ISO 8899 .......................................................23BS ISO 8900 .......................................................23BS ISO 9276 .......................................................12BS ISO 9588 .......................................................12BS ISO 9848 .......................................................23BS ISO 9947 .......................................................23BS ISO 9981 .......................................................23BS ISO 9982 .......................................................23BS ISO 10054 .....................................................23BS ISO 10059 .....................................................23BS ISO 10129 .....................................................12BS ISO 10458 .....................................................23BS ISO 10952 .....................................................12BS ISO 11500 .....................................................12BS ISO/IEC 11694 ...............................................14BS ISO 11901 .....................................................23BS ISO 12140 .....................................................23BS ISO 12745 .....................................................14BS ISO 13203 .....................................................23BS ISO/IEC 13249 ...............................................23BS ISO 13357 .....................................................23BS ISO 13556 .....................................................23BS ISO 14469 .....................................................23
BS EN 13722 ......................................................21BS EN 13757 ......................................................10BS EN ISO 13789 ................................................10BS EN 13802 ......................................................21BS EN 13925 ......................................................17BS EN 13927 ......................................................17BS EN 13957 ......................................................10BS EN 13958 ......................................................11BS EN 13959 ................................................15, 18BS EN 13990 ......................................................21BS EN 14073 ......................................................21BS EN 14074 ......................................................21BS EN 14076 ......................................................21BS EN 14096 ......................................................17BS EN 14218 ......................................................17BS EN 14219 ......................................................17BS EN 14317 ......................................................11BS EN ISO 14419 ................................................21BS EN 14451 ................................................15, 18BS EN ISO 14935 ................................................21BS EN 15004 ................................................11, 19BS EN ISO 15065 ................................................17BS EN 15093 ......................................................11BS EN 15094 ......................................................11BS EN ISO 15236 ................................................21BS EN 15272 ......................................................11BS EN 15446 ......................................................11BS EN 15570 ......................................................11BS EN 15603 ......................................................11BS EN 15688 ......................................................11BS EN ISO 15732 ................................................21BS EN ISO 15874 ................................................21BS EN ISO 15875 ................................................21BS EN ISO 15876 ................................................21BS EN ISO 16047 ................................................17BS EN ISO 17834 ................................................21BS EN ISO 18104 ................................................21BS EN ISO 18756 ................................................21BS EN ISO 18757 ................................................21BS EN ISO 19112 ................................................21BS EN ISO 19133 ................................................21BS EN ISO 19135 ................................................21BS EN ISO 19954 ................................................21BS EN ISO 20783 ................................................21BS EN ISO 21178 ................................................21BS EN ISO 21179 ................................................21BS EN ISO 21180 ................................................21BS EN ISO 21181 ................................................22BS EN ISO 21182 ................................................22BS EN ISO 21183 ................................................22BS EN ISO 21535 ..........................................11, 19BS EN ISO 21670 ................................................17BS EN ISO 23953 ................................................22BS EN 25580 ......................................................17BS EN 45502 ................................................11, 18BS EN 60065 ......................................................19BS EN 60076 ......................................................11BS EN 60255 ......................................................11BS EN 60289 ......................................................11BS EN 60317 ......................................................11BS EN 60491 ......................................................19BS EN 60601 ......................................................18BS EN 60730 ................................................11, 19BS EN 61300 ......................................................12BS EN 61754 ......................................................12BS EN 61810 ......................................................19BS EN 61970 ......................................................12BS EN 61996 ......................................................12BS EN 62031 ......................................................12DD ENV 927 .........................................................8
Alpha-numeric Sequence of British Standards continued...
6 Update Standards Dec 2008Prices may be subject to change.
BS EN 927:—Paints and varnishes. Coating materials andcoating systems for exterior wood
BS EN 927-2:2006Performance specification
supersedes DD ENV 927-2:2000ISBN 978 0 580 56014 9£40.00 members, £80.00 non-members
STI/28
BS EN 927-3:2006Natural weathering test
supersedes BS EN 927-3:2000ISBN 978 0 580 56078 1£57.00 members, £114.00 non-members
STI/28
BS EN 927-5:2006Assessment of the liquid water permeability
supersedes BS EN 927-5:2000ISBN 978 0 580 56079 8£40.00 members, £80.00 non-members
STI/28
BS EN 927-6:2006Exposure of wood coatings to artificialweathering using fluorescent UV lamps andwater
no current standard is supersededISBN 978 0 580 55269 4£40.00 members, £80.00 non-members
STI/28
BS EN 1018:2006Chemicals used for treatment of water intendedfor human consumption. Calcium carbonate
supersedes BS EN 1018:1998ISBN 978 0 580 57136 7£32.00 members, £64.00 non-members
CII/59
BS EN 1019:2005Chemicals used for treatment of water intendedfor human consumption. Sulfur dioxide
supersedes BS EN 1019:1996ISBN 978 0 580 55208 3£40.00 members, £80.00 non-members
CII/59
BS EN 1124:—Pipes and fittings of longitudinally weldedstainless steel pipes with spigot and socket forwaste water systems
BS EN 1124-3:2008System X. Dimensions
supersedes BS EN 1124-3:1999ISBN 978 0 580 58014 7£75.00 members, £150.00 non-members
ISE/8
BS EN 1177:2008Impact attenuating playground surfacing.Determination of critical fall height
supersedes BS EN 1177:1998 which remains currentISBN 978 0 580 55368 4£40.00 members, £80.00 non-members
SW/65
BS 25999:—Business continuity management
BS 25999-1:2006 (German)Code of practice (German translation ofBS 25999-1:2006)
no current standard is supersededISBN 978 0 580 62938 9£50.00 members, £100.00 non-members
BCM/1
BS 25999-2:2007 (German)Specification (German translation of BS 25999-2:2007)
no current standard is supersededISBN 978 0 580 62942 6£45.00 members, £90.00 non-members
BCM/1/-/2
BS 31100:2008Risk management. Code of practice
no current standard is supersededISBN 978 0 580 64908 0£50.00 members, £100.00 non-members
RM/1
BS EN PUBLICATIONS
The following are British Standardimplementations of the English languageversions of European Standards (ENs).
BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.
Note: The date referenced in theidentifier is the date of the Europeanstandard.
BS EN 589:2008Automotive fuels. LPG. Requirements and testmethods
supersedes BS EN 589:2004ISBN 978 0 580 61256 5£40.00 members, £80.00 non-members
PTI/15
BS EN ISO 648:2008Laboratory glassware. Single-volume pipettes
supersedes BS 1583:1986ISBN 978 0 580 58559 3£40.00 members, £80.00 non-members
LBI/36/1
BS EN 725:—Advanced technical ceramics. Methods of testfor ceramic powders
BS EN 725-3:2007Determination of the oxygen content ofnonoxides by thermal extraction with a carriergas
supersedes BS EN 725-3:1994ISBN 978 0 580 54525 2£32.00 members, £64.00 non-members
RPI/13
BRITISH STANDARDS
The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).
The publications listed below are newand revised British Standards that weremade available last month.
An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.
In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.
BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.
Please order by the British Standardreference not the ISBN number.
BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.
BS 969:2008Specification for limits and tolerances on plainlimit gauges
supersedes BS 969:1982ISBN 978 0 580 61998 4£40.00 members, £80.00 non-members
TDW/4
BS 5266-10:2008Guide to the design and provision ofemergency lighting to reduce the risks fromhazards in the event of failure of the normallighting supply
no current standard is supersededISBN 978 0 580 58881 5£57.00 members, £114.00 non-members
CPL/34/9
BS 8493:2008Light reflectance value (LRV) of a surface.Method of test
no current standard is supersededISBN 978 0 580 57517 4£40.00 members, £80.00 non-members
B/559
British Standards
8 Update Standards Dec 2008Prices may be subject to change.
BS EN 12882:2008Conveyor belts for general purpose use.Electrical and flammability safety requirements
supersedes BS EN 12882:2002ISBN 978 0 580 58508 1£40.00 members, £80.00 non-members
PRI/67
BS EN 12911:2006Products used for treatment of water intendedfor human consumption. Manganese greensand
supersedes BS EN 12911:1999ISBN 978 0 580 56080 4£57.00 members, £114.00 non-members
CII/59
BS EN 13348:2008Copper and copper alloys. Seamless, roundcopper tubes for medical gases or vacuum
supersedes BS EN 13348:2001ISBN 978 0 580 60508 6£57.00 members, £114.00 non-members
NFE/34/1
BS EN 13757:—Communication systems for meters and remotereading of meters
BS EN 13757-6:2008Local Bus
no current standard is supersededISBN 978 0 580 58232 5£32.00 members, £64.00 non-members
PEL/894
BS EN ISO 13789:2007Thermal performance of buildings. Transmissionand ventilation heat transfer coefficients.Calculation method
supersedes BS EN ISO 13789:1999ISBN 978 0 580 54446 0£57.00 members, £114.00 non-members
B/540
BS EN 13957:2008Aluminium and aluminium alloys. Extrudedround, coiled tube for general applications.Specification
supersedes BS EN 13957:2003ISBN 978 0 580 56396 6£40.00 members, £80.00 non-members
NFE/35
BS EN ISO 6401:2008Plastics. Poly(vinyl chloride). Determination ofresidual vinyl chloride monomer. Gas-chromatographic method
supersedes BS EN ISO 6401:2004ISBN 978 0 580 57207 4£32.00 members, £64.00 non-members
PRI/21
BS EN ISO 11890:—Paints and varnishes. Determination of volatileorganic compound (VOC) content
BS EN ISO 11890-1:2007Difference method
supersedes BS EN ISO 11890-1:2001ISBN 978 0 580 55941 9£40.00 members, £80.00 non-members
STI/10
BS EN 12273:2008Slurry surfacing. Requirements
no current standard is supersededISBN 978 0 580 56940 1£65.00 members, £130.00 non-members
B/510/2
BS EN 12409:2008Plastics and rubber machines. Thermoformingmachines. Safety requirements
supersedes BS EN 12409:1999ISBN 978 0 580 54652 5£75.00 members, £150.00 non-members
MCE/3/2
BS EN 12808:—Grouts for tiles
BS EN 12808-1:2008Determination of chemical resistance ofreaction resin mortars
supersedes BS EN 12808-1:1999ISBN 978 0 580 63511 3£32.00 members, £64.00 non-members
B/539
BS EN 12808-2:2008Determination of resistance to abrasion
supersedes BS EN 12808-2:2002ISBN 978 0 580 61257 2£32.00 members, £64.00 non-members
B/539
BS EN 12808-3:2008Determination of flexural and compressivestrength
supersedes BS EN 12808-3:2002ISBN 978 0 580 61258 9£32.00 members, £64.00 non-members
B/539
BS EN 12808-5:2008Determination of water absorption
supersedes BS EN 12808-5:2002ISBN 978 0 580 61259 6£32.00 members, £64.00 non-members
B/539
BS EN 1301:—Aluminium and aluminium alloys. Drawn wire
BS EN 1301-1:2008Technical conditions for inspection and delivery
supersedes BS EN 1301-1:1997ISBN 978 0 580 56393 5£32.00 members, £64.00 non-members
NFE/35
BS EN 1301-2:2008Mechanical properties
supersedes BS EN 1301-2:1997ISBN 978 0 580 56394 2£40.00 members, £80.00 non-members
NFE/35
BS EN 1301-3:2008Tolerances on dimensions
supersedes BS EN 1301-3:1997ISBN 978 0 580 56395 9£32.00 members, £64.00 non-members
NFE/35
BS EN 1591:—Flanges and their joints. Design rules forgasketed circular flange connections
BS EN 1591-2:2008Gasket parameters
supersedes DD ENV 1591-2:2001ISBN 978 0 580 56594 6£80.00 members, £160.00 non-members
PSE/15
BS EN 1715:—Aluminium and aluminium alloys. Drawingstock
BS EN 1715-1:2008General requirements and technical conditionsfor inspection and delivery
supersedes BS EN 1715-1:1998ISBN 978 0 580 57005 6£40.00 members, £80.00 non-members
NFE/35
BS EN 1715-4:2008Specific requirements for welding applications
supersedes BS EN 1715-4:1998ISBN 978 0 580 57008 7£32.00 members, £64.00 non-members
NFE/35
BS EN ISO 3382:—Acoustics. Measurement of room acousticparameters
BS EN ISO 3382-2:2008Reverberation time in ordinary rooms
partially supersedes BS EN ISO 3382:2000ISBN 978 0 580 53586 4£57.00 members, £114.00 non-members
EH/1/6
BS EN Publications continued...
10 Update Standards Dec 2008Prices may be subject to change.
your order
BS EN 45502:—Active implantable medical devices
BS EN 45502-2-2:2008Particular requirements for active implantablemedical devices intended to treattachyarrhythmia (includes implantabledefibrillators)
supersedes BS 6902-1:1990 and BS 6902-1:Supplement No. 1:1996ISBN 978 0 580 53918 3£90.00 members, £180.00 non-members
CH/150/6
BS EN 60076:—Power transformers
BS EN 60076-6:2008Reactors
supersedes BS EN 60289:1995 which remainscurrentISBN 978 0 580 55392 9£98.00 members, £196.00 non-members
PEL/14
BS EN 60255:—Measuring relays and protection equipment
BS EN 60255-22-3:2008Electrical disturbance tests. Radiatedelectromagnetic field immunity
supersedes BS EN 60255-22-3:2001ISBN 978 0 580 56752 0£40.00 members, £80.00 non-members
PEL/95
BS EN 60317:—Specifications for particular types of windingwires
BS EN 60317-0-1:2008General requirements. Enamelled round copperwire
supersedes BS EN 60317-0-1:1998ISBN 978 0 580 56283 9£57.00 members, £114.00 non-members
GEL/55
BS EN 60730:—Automatic electrical controls for household andsimilar use
BS EN 60730-2-6:2008Particular requirements for automatic electricalpressure sensing controls including mechanicalrequirements
supersedes BS EN 60730-2-6:1995 which remainscurrentISBN 978 0 580 54106 3£57.00 members, £114.00 non-members
CPL/72
BS EN 15094:2008Safety of machinery. Safety requirements forcold flat rolling mills
no current standard is supersededISBN 978 0 580 55205 2£80.00 members, £160.00 non-members
MCE/23
BS EN 15272:—Inland navigation vessels. Equipment for ropeleading
BS EN 15272-3:2007Roller fairleads
no current standard is supersededISBN 978 0 580 56350 8£40.00 members, £80.00 non-members
SME/32/-/7
BS EN 15446:2008Fugitive and diffuse emissions of commonconcern to industry sectors. Measurement offugitive emission of vapours generating fromequipment and piping leaks
no current standard is supersededISBN 978 0 580 56280 8£40.00 members, £80.00 non-members
EH/2/1
BS EN 15570:2008Hardware for furniture. Strength and durabilityof hinges and their components. Hingespivoting on a vertical axis
no current standard is supersededISBN 978 0 580 57711 6£57.00 members, £114.00 non-members
FW/0/1
BS EN 15603:2008Energy performance of buildings. Overallenergy use and definition of energy ratings
no current standard is supersededISBN 978 0 580 59028 3£80.00 members, £160.00 non-members
B/540
BS EN 15688:2008Fertilizers. Determination of urease inhibitor N-(n-butyl)thiophosphoric triamide (NBPT) usinghigh-performance liquid chromatography(HPLC)
no current standard is supersededISBN 978 0 580 58650 7£32.00 members, £64.00 non-members
CII/37
BS EN ISO 21535:2007Non-active surgical implants. Joint replacementimplants. Specific requirements for hip-jointreplacement implants
supersedes BS EN 12563:1999ISBN 978 0 580 56282 2£40.00 members, £80.00 non-members
CH/150/4
BS EN 13958:2008Aluminium and aluminium alloys. Cold drawn,round, coiled tube for general applications.Specification
supersedes BS EN 13958:2003ISBN 978 0 580 56397 3£40.00 members, £80.00 non-members
NFE/35
BS EN 14317:—Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliatedvermiculite (EV) products
BS EN 14317-2:2007Specification for the installed products
no current standard is supersededISBN 978 0 580 58021 5£32.00 members, £64.00 non-members
B/540
BS EN 15004:—Fixed firefighting systems. Gas extinguishingsystems
BS EN 15004-7:2008Physical properties and system design of gasextinguishing systems for IG-01 extinguishant
supersedes BS ISO 14520-12:2005ISBN 978 0 580 59948 4£32.00 members, £64.00 non-members
FSH/18/6
Also available as part of KIT 105.
BS EN 15004-8:2008Physical properties and system design of gasextinguishing systems for IG-100 extinguishant
supersedes BS ISO 14520-13:2005ISBN 978 0 580 59949 1£32.00 members, £64.00 non-members
FSH/18/6
Also available as part of KIT 105.
BS EN 15004-9:2008Physical properties and system design of gasextinguishing systems for IG-55 extinguishant
supersedes BS ISO 14520-14:2005ISBN 978 0 580 59950 7£40.00 members, £80.00 non-members
FSH/18/6
Also available as part of KIT 105.
BS EN 15004-10:2008Physical properties and system design of gasextinguishing systems for IG-541 extinguishant
supersedes BS ISO 14520-15:2005ISBN 978 0 580 59951 4£40.00 members, £80.00 non-members
FSH/18/6
Also available as part of KIT 105.
BS EN 15093:2008Safety of machinery. Safety requirements forhot flat rolling mills
no current standard is supersededISBN 978 0 580 55204 5£80.00 members, £160.00 non-members
MCE/23
Update Standards Dec 2008 Prices may be subject to change. 11
BS ISO 7146:—Plain bearings. Appearance andcharacterization of damage to metallichydrodynamic bearings
BS ISO 7146-1:2008General
no current standard is supersededISBN 978 0 580 56413 0£80.00 members, £160.00 non-members
MCE/12
BS ISO 7146-2:2008Cavitation erosion and its countermeasures
no current standard is supersededISBN 978 0 580 56927 2£57.00 members, £114.00 non-members
MCE/12
BS ISO 9276:—Representation of results of particle sizeanalysis
BS ISO 9276-6:2008Descriptive and quantitative representation ofparticle shape and morphology
no current standard is supersededISBN 978 0 580 57387 3£65.00 members, £130.00 non-members
LBI/37
BS ISO 9588:2007Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reducethe risk of hydrogen embrittlement
supersedes BS ISO 9588:1999ISBN 978 0 580 60513 0£32.00 members, £64.00 non-members
STI/33
BS ISO 10129:2006Plain bearings. Testing of bearing materials.Resistance to corrosion by lubricants understatic conditions
no current standard is supersededISBN 978 0 580 54573 3£32.00 members, £64.00 non-members
MCE/12
BS ISO 10952:2008Plastics piping systems. Glass-reinforcedthermosetting plastics (GRP) pipes and fittings.Determination of the resistance to chemicalattack for the inside of a section in deflectedcondition
no current standard is supersededISBN 978 0 580 56900 5£40.00 members, £80.00 non-members
PRI/88/2
BS ISO 11500:2008Hydraulic fluid power. Determination of theparticulate contamination level of a liquidsample by automatic particle counting using thelight-extinction principle
supersedes BS ISO 11500:1997ISBN 978 0 580 55546 6£65.00 members, £130.00 non-members
MCE/18/-/6
BS IMPLEMENTATIONS
BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.
Note: The date referenced in theidentifier is the date of the internationalstandard.
BS ISO 124:2008Latex, rubber. Determination of total solidscontent
supersedes BS 6057-3.2:1997ISBN 978 0 580 63390 4£40.00 members, £80.00 non-members
PRI/50
BS ISO 1170:2008Coal and coke. Calculation of analyses todifferent bases
no current standard is supersededISBN 978 0 580 56508 3£40.00 members, £80.00 non-members
PTI/16
BS ISO 4126:—Safety devices for protection against excessivepressure
BS ISO 4126-9:2008Application and installation of safety devicesexcluding stand-alone bursting disc safetydevices
no current standard is supersededISBN 978 0 580 55250 2£65.00 members, £130.00 non-members
PVE/12
BS ISO 4411:2008Hydraulic fluid power. Valves. Determination ofpressure differential/flow characteristics
no current standard is supersededISBN 978 0 580 58646 0£40.00 members, £80.00 non-members
MCE/18/-/5
BS ISO 5667:—Water quality. Sampling
BS ISO 5667-17:2008Guidance on sampling of bulk suspended solids
supersedes BS ISO 5667-17:2000ISBN 978 0 580 55614 2£65.00 members, £130.00 non-members
EH/3/6
BS ISO 6535:2008Portable chain-saws. Chain brake performance
supersedes BS 6916-5:1988ISBN 978 0 580 58472 5£32.00 members, £64.00 non-members
AGE/29
BS EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures
BS EN 61300-2-15:2008Tests. Torque strength of coupling mechanism
supersedes BS EN 61300-2-15:1997ISBN 978 0 580 57891 5£32.00 members, £64.00 non-members
GEL/86/2
BS EN 61754:—Fibre optic interconnecting devices and passivecomponents. Fibre optic connector interfaces
BS EN 61754-7:2008Type MPO connector family
supersedes BS EN 61754-7:2005ISBN 978 0 580 57566 2£57.00 members, £114.00 non-members
GEL/86/2
BS EN 61970:—Energy management system applicationprogram interface (EMS-API)
BS EN 61970-453:2008CIM based graphics exchange
no current standard is supersededISBN 978 0 580 57135 0£40.00 members, £80.00 non-members
PEL/57
BS EN 61996:—Maritime navigation and radiocommunicationequipment and systems. Shipborne voyage datarecorder (VDR)
BS EN 61996-1:2008Voyage data recorder (VDR). Performancerequirements, methods of testing and requiredtest results
supersedes BS EN 61996:2001ISBN 978 0 580 55514 5£80.00 members, £160.00 non-members
EPL/80
BS EN 61996-2:2008Simplified voyage data recorder (S-VDR).Performance requirements, methods of testingand required test results
supersedes BS EN 61996-2:2006ISBN 978 0 580 58402 2£80.00 members, £160.00 non-members
EPL/80
BS EN 62031:2008LED modules for general lighting. Safetyspecifications
no current standard is supersededISBN 978 0 580 55559 6£40.00 members, £80.00 non-members
CPL/34/1
BS EN Publications continued...
12 Update Standards Dec 2008Prices may be subject to change.
PD CEN/TR 15728:2008Design and use of inserts for lifting andhandling of precast concrete. Elements
no current standard is supersededISBN 978 0 580 60274 0£80.00 members, £160.00 non-members
B/524
PD ISO/IEC TR 90005:2008Systems engineering. Guidelines for theapplication of ISO 9001 to system life cycleprocesses
no current standard is supersededISBN 978 0 580 63975 3£103.00 members, £206.00 non-members
IST/15
DRAFTS FOR DEVELOPMENT
DD CEN ISO/TS 27687:2008Nanotechnologies. Terminology and definitionsfor nano-objects. Nanoparticle, nanofibre andnanoplate
no current standard is supersededISBN 978 0 580 56419 2£20.00 members, £40.00 non-members
NTI/1
DD IEC/TS 62396:—Process management for avionics. Atmosphericradiation effects
DD IEC/TS 62396-2:2008Guidelines for single event effects testing foravionics systems
supersedes DD IEC/PAS 62396-2:2007ISBN 978 0 580 62024 9£32.00 members, £64.00 non-members
GEL/107
DD IEC/TS 62396-3:2008Optimising system design to accommodate thesingle event effects (SEE) of atmosphericradiation
supersedes DD IEC/PAS 62396-3:2007ISBN 978 0 580 62278 6£32.00 members, £64.00 non-members
GEL/107
DD IEC/TS 62396-5:2008Guidelines for assessing thermal neutron fluxesand effects in avionics systems
supersedes DD IEC/PAS 62396-5:2007ISBN 978 0 580 61825 3£20.00 members, £40.00 non-members
GEL/107
DD IEC/PAS 62588:2008Marking and labeling of components, PCBs andPCBAs to identify lead(Pb), Pb-free and otherattributes
no current standard is supersededISBN 978 0 580 64571 6£20.00 members, £40.00 non-members
EPL/501
BS ISO 21009:—Cryogenic vessels. Static vacuum-insulatedvessels
BS ISO 21009-1:2008Design, fabrication, inspection and tests
no current standard is supersededISBN 978 0 580 57349 1£103.00 members, £206.00 non-members
PVE/18
BS ISO 22493:2008Microbeam analysis. Scanning electronmicroscopy. Vocabulary
no current standard is supersededISBN 978 0 580 54987 8£65.00 members, £130.00 non-members
CII/9
BS ISO 23380:2008Selection methods for the determination oftrace elements in coal
no current standard is supersededISBN 978 0 580 56513 7£40.00 members, £80.00 non-members
PTI/16
BS ISO 26322:—Tractors for agriculture and forestry. Safety
BS ISO 26322-1:2008Standard tractors
no current standard is supersededISBN 978 0 580 58317 9£40.00 members, £80.00 non-members
AGE/6
BS ISO 29470:2008Thermal insulating products for buildingapplications. Determination of the apparentdensity
no current standard is supersededISBN 978 0 580 58940 9£40.00 members, £80.00 non-members
B/540/8
BS IEC 60870:—Telecontrol equipment and systems
BS IEC 60870-5-6:2006Guidelines for conformance testing for the IEC60870-5 companion standards
no current standard is supersededISBN 978 0 580 53893 3£57.00 members, £114.00 non-members
PEL/57
PUBLISHED DOCUMENTS
PD ISO/TR 11150:2007Natural gas. Hydrocarbon dew point andhydrocarbon content
no current standard is supersededISBN 978 0 580 61345 6£57.00 members, £114.00 non-members
PTI/15
BS ISO/IEC 11694:—Identification cards. Optical memory cards.Linear recording method
BS ISO/IEC 11694-3:2008Optical properties and characteristics
supersedes BS ISO/IEC 11694-3:2001ISBN 978 0 580 58565 4£32.00 members, £64.00 non-members
IST/17
BS ISO/IEC 11694-4:2008Logical data structures
supersedes BS ISO/IEC 11694-4:2001ISBN 978 0 580 58564 7£57.00 members, £114.00 non-members
IST/17
BS ISO 12745:2008Copper, lead and zinc ores and concentrates.Precision and bias of mass measurementtechniques
no current standard is supersededISBN 978 0 580 63619 6£80.00 members, £160.00 non-members
NFE/36
BS ISO 14717:2008Oil of origanum, Spanish type [Coridothymuscapitatus (L.) Rchb.f.]
no current standard is supersededISBN 978 0 580 58208 0£40.00 members, £80.00 non-members
AW/54
BS ISO 15112:2007Natural gas. Energy determination
no current standard is supersededISBN 978 0 580 54653 2£85.00 members, £170.00 non-members
PTI/15
BS ISO 15970:2008Natural gas. Measurement of properties.Volumetric properties: density, pressure,temperature and compression factor
no current standard is supersededISBN 978 0 580 58165 6£80.00 members, £160.00 non-members
PTI/15
BS ISO 16212:2008Cosmetics. Microbiology. Enumeration of yeastand mould
no current standard is supersededISBN 978 0 580 55541 1£57.00 members, £114.00 non-members
CW/217
BS ISO 18938:2008Imaging materials. Optical discs. Care andhandling for extended storage
no current standard is supersededISBN 978 0 580 57624 9£65.00 members, £130.00 non-members
CPW/42
BS Implementations continued...
14 Update Standards Dec 2008Prices may be subject to change.
UPDATED BRITISHSTANDARDS
The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.
NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.
BS 4211:2005+A1:2008Specification for permanently fixed ladders
AMENDMENT 1£57.00 members, £114.00 non-members
B/208
SPECIAL ANNOUNCEMENTS
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
BS 598:—Sampling and examination of bituminousmixtures for roads and other paved areas
BS 598-110:1998Methods of test for the determination ofwheel-tracking rate and depth
This standard was withdrawn in error and hasnow been re-instated as the relevantBSI committee reported that there are still usersof this standard.Contact: Bernard WilliamsEmail: [email protected]
B/510/1
BIP 2181:2008Guide to PAS 2050. How to assess the carbonfootprint of goods and services
no current standard is supersededISBN 978 0 580 64636 2£9.95 members, £9.95 non-members
AMENDMENTS TO BRITISHSTANDARDS
Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is re-issued as anew edition (see ’Updated BritishStandards’). Amendments which makesmaller changes or corrections areavailable on request, free of charge topast purchasers of the standard. Allamendments to date of despatch areincluded within any main publicationwhen ordered for the first time.
The following amendments to BritishStandards were made available lastmonth.
BS EN 1916:2002Concrete pipes and fittings, unreinforced, steelfibre and reinforced
CORRIGENDUM 1
B/505
BS EN 1917:2002Concrete manholes and inspection chambers,unreinforced, steel fibre and reinforced
CORRIGENDUM 3
B/505
Also incorporates Corrigenda 1 & 2.
BS EN ISO 10081:—Classification of dense shaped refractoryproducts
BS EN ISO 10081-3:2005Basic products containing from 7% to 50%residual carbon
CORRIGENDUM 2
RPI/1
Also incorporates Corrigendum 1.
BS EN 13959:2004Anti-pollution check valves. DN 6 to DN 250inclusive Family E, type A, B, C, and D
CORRIGENDUM 1
B/504
BS EN 14451:2005Devices to prevent pollution by backflow ofpotable water. In-line anti-vacuum valves DN 8to DN 80. Family D, type A
CORRIGENDUM 1
B/504
PUBLICLY AVAILABLESPECIFICATIONS
Publicly Available Specifications (formerlyProduct Assessment Specifications) areissued to provide an interim documentwhere there is a market need but wherea full British or European Standard hasyet to be published.
PAS 67:2008Laboratory tests to determine the heating andelectrical performance of heat-led micro-cogeneration packages primarily intended forheating dwellings
no current standard is supersededISBN 978 0 580 64480 1£65.00 members, £65.00 non-members
PAS 220:2008Prerequisite programmes on food safety forfood manufacturing
no current standard is supersededISBN 978 0 580 62878 8£70.00 members, £70.00 non-members
SPECIALIST BOOKS FROMBSI
BIP 0026:2008ISO/IEC 27001. Complete ISMS DocumentationToolkit
supersedes BIP 0026:2006£529.00 members, £529.00 non-membersVAT is applicable to this item.
BIP 0096:2007ITIL version 3. Official introduction to the ITILservice lifecycle
no current standard is supersededISBN 978 0113 31061 6£30.00 members, £30.00 non-members
BIP 2034:2008Disaster and emergency management systems
no current standard is supersededISBN 978 0 580 60710 3£30.00 members, £30.00 non-members
BIP 2082:2008Electrician’s Guide to the Building RegulationsPart P. 2nd Edition
supersedes BIP 2082:2005ISBN 978 0 86341 862 4£20.00 members, £20.00 non-members
BIP 2139:2007Principles and practices of business continuity.Tools and techniques
no current standard is supersededISBN 1 931332 39 8£55.00 members, £55.00 non-members
Update Standards Dec 2008 Prices may be subject to change. 15
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
BS EN ISO 4026:2003Hexagon socket set screws with flat point
FME/9/3
BS EN ISO 4027:2003Hexagon socket set screws with cone point
FME/9/3
BS EN ISO 4028:2003Hexagon socket set screws with dog point
FME/9/3
BS EN ISO 4029:2003Hexagon socket set screws with cup point
FME/9/3
BS EN ISO 7048:1999Cross recessed cheese head screws
FME/9/3
BS EN ISO 10664:2005Hexalobular internal driving feature for boltsand screws
FME/9/2
BS EN 12223:2000Non-destructive testing. Ultrasonic examination.Specification for calibration block No.1
WEE/46
BS EN 12421:1998Magnesium and magnesium alloys. Unalloyedmagnesium
NFE/35
BS EN 12543:—Non-destructive testing. Characteristics of focalspots in industrial X-ray systems for use in non-destructive testing
BS EN 12543-1:1999Scanning method
WEE/46
BS EN 12543-3:1999Slit camera radiographic method
WEE/46
BS EN 12543-4:1999Edge method
WEE/46
BS EN 12543-5:1999Measurement of the effective focal spot size ofmini and micro focus X-ray tubes
WEE/46
BS EN 12544:—Non-destructive testing. Measurement andevaluation of the X-ray tube voltage
BS EN 12544-1:1999Voltage divider method
WEE/46
BS EN 12544-2:2000Constancy check by the thick filter method
WEE/46
BS EN 462-4:1995Experimental evaluation of image quality valuesand image quality tables
WEE/46
BS EN 583:—Non-destructive testing. Ultrasonic examination
BS EN 583-1:1999General principles
WEE/46
BS EN 583-5:2001Characterization and sizing of discontinuities
WEE/46
BS EN 1330:—Non-destructive testing. Terminology
BS EN 1330-1:1998List of general terms
WEE/46
BS EN 1330-2:1998Terms common to the non-destructive testingmethods
WEE/46
BS EN 1330-8:1998Terms used in leak tightness testing
WEE/46
BS EN 1330-10:2003Terms used in visual testing
WEE/46
BS EN 1518:1998Non-destructive testing. Leak testing.Characterization of mass spectrometer leakdetectors
WEE/46
BS EN 1593:1999Non-destructive testing. Leak testing. Bubbleemission techniques
WEE/46
BS EN 1779:1999Non-destructive testing. Leak testing. Criteriafor method and technique selection
WEE/46
BS EN ISO 2342:2003Slotted headless screws with shank
FME/9/1
BS EN ISO 3452:—Non-destructive testing. Penetrant testing
BS EN ISO 3452-3:1999Reference test blocks
WEE/46
BS EN ISO 3452-4:1999Equipment
WEE/46
BRITISH STANDARDSREVIEWED ANDCONFIRMED
It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.
Confirmation indicates the continuingcurrency of a standard.
Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.
BS 7288:1990Specification for socket outlets incorporatingresidual current devices (S.R.C.D.s)
PEL/23
BS 7445:—Description and measurement of environmentalnoise
BS 7445-1:2003Guide to quantities and procedures
EH/1/3
BS 8100:—Lattice towers and masts
BS 8100-2:1986Guide to the background and use of Part 1’Code of practice for loading’
B/525/32
BS 8100-3:1999Code of practice for strength assessment ofmembers of lattice towers and masts
B/525/32
BS 8100-4:1995Code of practice for loading of guyed masts
B/525/32
BS EN 444:1994Non-destructive testing. General principles forradiographic examination of metallic materialsby X- and gamma-rays
WEE/46
BS EN 462:—Non-destructive testing. Image quality ofradiographs
BS EN 462-1:1994Image quality indicators (wire type).Determination of image quality value
WEE/46
BS EN 462-2:1994Image quality indicators (step/hole type).Determination of image quality value
WEE/46
British Standards Reviewed and Confirmed
16 Update Standards Dec 2008Prices may be subject to change.
BRITISH STANDARDSPROPOSED FORDECLARATION OFOBSOLESCENCE
Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment, but needs to beretained for the servicing of existingequipment that is expected to have along working life.
A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 31 January, 2009.
BS 7083:1996Guide to the accommodation and operatingenvironment for information technology (IT)equipment
ICT/-
This standard has been proposed for obsolescenceas the document needs to be revised in light ofprogression in the area relating to the environmentsfor information technology equipment
BRITISH STANDARDSDECLARED OBSOLESCENT
Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.
BS 697:1986Specification for rubber gloves for electricalpurposes
PEL/78
This standard has been declared obsolescent as it isno longer relevant. It is superseded byBS EN 60903:1993
BS 5655:—Lifts and service lifts
BS 5655-10:1986Specification for the testing and inspection ofelectric and hydraulic lifts
MHE/4
This standard has been declared obsolescent as it issuperseded by BS 8486-1:2007 and BS 8486-2:2007, which has replaced BS 5655-10.1.1:1995and BS 5655-10.2.1:1995
BS 6088:1981Specification for solid glass beads for use withroad marking compounds and for otherindustrial uses
B/510
This standard has been re-declared as obsolescentfor a further period as it is no longer relevant
DD CEN/TS 15053:2005Non-destructive testing. Recommendations fordiscontinuities-types in test specimens forexamination
WEE/46
BS EN ISO 15065:2005Countersinks for countersunk head screws withhead configuration in accordance with ISO 7721
FME/9/3
BS EN ISO 16047:2005Fasteners. Torque/clamp force testing
FME/9/1
DD CEN ISO/TS 21432:2005Non-destructive testing. Standard test methodfor determining residual stresses by neutrondiffraction
WEE/46
BS EN ISO 21670:2003Hexagon weld nuts with flange
FME/9
BS EN 25580:1992Specification for minimum requirements forindustrial radiographic illuminators for non-destructive testing
WEE/46
BS ISO 461:—Aircraft. Connectors for ground electricalsupplies
BS ISO 461-1:2003Design, performance and test requirements
ACE/6
BS ISO 14595:2003Microbeam analysis. Electron probemicroanalysis. Guidelines for the specification ofcertified reference materials (CRMs)
CII/9
BS ISO 17470:2004Microbeam analysis. Electron probemicroanalysis. Guidelines for qualitative pointanalysis by wavelength dispersive X-rayspectrometry
CII/9
BS ISO 18114:2003Surface chemical analysis. Secondary-ion massspectrometry. Determination of relativesensitivity factors from ion-implanted referencematerials
CII/60
BS EN 12544-3:1999Spectrometric method
WEE/46
BS EN 12679:2000Non-destructive testing. Determination of thesize of industrial radiographic sources.Radiographic method
WEE/46
BS EN 13068:—Non-destructive testing. Radioscopic testing
BS EN 13068-1:2000Quantitative measurement of imagingproperties
WEE/46
BS EN 13068-2:2000Check of long term stability of imaging devices
WEE/46
BS EN 13068-3:2001General principles of radioscopic testing ofmetallic materials by X- and gamma rays
WEE/46
BS EN 13925:—Non-destructive testing. X-ray diffraction frompolycrystalline and amorphous materials
BS EN 13925-1:2003General principles
WEE/46
BS EN 13925-2:2003Procedures
WEE/46
BS EN 13927:2003Non-destructive testing. Visual testing.Equipment
WEE/46
BS EN 14096:—Non-destructive testing. Qualification ofradiographic film digitisation systems
BS EN 14096-1:2003Definitions, quantitative measurements ofimage quality parameters, standard referencefilm and qualitative control
WEE/46
BS EN 14096-2:2003Minimum requirements
WEE/46
BS EN 14218:2003Hexagon nuts with flange. Fine pitch thread
FME/9
BS EN 14219:2003Hexagon bolts with flange with metric finepitch thread. Small series
FME/9/3
Update Standards Dec 2008 Prices may be subject to change. 17
BS 598-107:2004Method of test for the determination of thecomposition of design surface course rolledasphalt
B/510/1
This standard has been withdrawn as it is no longerused or required in the UK
BS 1583:1986Specification for one-mark pipettes
LBI/36
Superseded by BS EN ISO 648:2008
DD 213:1993Method for determination of the indirecttensile stiffness modulus of bituminous mixtures
B/510
This standard has been withdrawn as it is no longerused or required in the UK
BS 6057:—Rubber latices
BS 6057-3.2:1997Methods of test. Determination of total solidscontent of rubber latices
PRI/50
Superseded by BS ISO 124:2008
BS 6282:—Devices with moving parts for the prevention ofcontamination of water by backflow
BS 6282-1:1982Specification for check valves of nominal size upto and including DN 54
B/504
Superseded by BS EN 13959:2004
BS 6282-2:1982Specification for terminal anti-vacuum valves ofnominal size up to and including DN 54
B/504
Superseded by BS EN 14451:2005
BS 6282-4:1982Specification for combined check and anti-vacuum valves of nominal size up to andincluding DN 42
B/504
Superseded by BS EN 14451:2005
BS 6902:—Cardiac pacemakers
BS 6902-1:1990Specification for implantable cardiacpacemakers
CH/150/6
Superseded by BS EN 45502-2-1:2003 andBS EN 45502-2-2:2008
BS 6902-1:Supplement No. 1:1996Specification for implantable cardiacpacemakers. Electromagnetic compatibility
CH/150/6
Superseded by BS EN 45502-2-1:2003 andBS EN 45502-2-2:2008
BRITISH STANDARDSPROPOSED FORWITHDRAWAL
A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by31 January, 2009.
Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.
BS EN ISO 8502:—Preparation of steel substrates beforeapplication of paints and related products. Testsfor the assessment of surface cleanliness
BS EN ISO 8502-10:2004Field method for the titrimetric determinationof water-soluble chloride
STI/21
This standard has been proposed for withdrawal asthe corresponding CEN and ISO standards have beenwithdrawn
BRITISH STANDARDSWITHDRAWN
If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn
BS 598:—Sampling and examination of bituminousmixtures for roads and other paved areas
BS 598-100:2004Methods for sampling for analysis
B/510/1
This standard has been withdrawn as it is no longerused or required in the UK
BS 598-101:2004Methods for preparatory treatments of samplesfor analysis
B/510/1
This standard has been withdrawn as it is no longerused or required in the UK
BS 598-102:2003Analytical test methods
B/510/1
This standard has been withdrawn as it is no longerused or required in the UK
BS 598-104:2005Methods of test for the determination ofdensity and compaction
B/510/1
This standard has been withdrawn as it is no longerused or required in the UK
BS 8110:—Structural use of concrete
BS 8110-1:1997Code of practice for design and construction
B/525/2
All relevant Eurocodes and their National Annexesfor design of concrete buildings will be published in2008. The NA to BS EN 1991-1-4 was published inSeptember 2008. The relevant committee, B/525/2consider that there is no need to continue tosupport BS 8110 now this is published as DCLGhave indicated it is acceptable to use EC2 for designaccording to the Building Regulations and will beadvising Local Authorities of this in the near future
BS 8110-2:1985Code of practice for special circumstances
B/525/2
All relevant Eurocodes and their National Annexesfor design of concrete buildings will be published in2008. The NA to BS EN 1991-1-4 was published inSeptember 2008. The relevant committee, B/525/2consider that there is no need to continue tosupport BS 8110 now this is published as DCLGhave indicated it is acceptable to use EC2 for designaccording to the Building Regulations and will beadvising Local Authorities of this in the near future
BS 8110-3:1985Design charts for singly reinforced beams,doubly reinforced beams and rectangularcolumns
B/525/2
All relevant Eurocodes and their National Annexesfor design of concrete buildings will be published in2008. The NA to BS EN 1991-1-4 was published inSeptember 2008. The relevant committee, B/525/2consider that there is no need to continue tosupport BS 8110 now this is published as DCLGhave indicated it is acceptable to use EC2 for designaccording to the Building Regulations and will beadvising Local Authorities of this in the near future
BS EN 60601:—Medical electrical equipment
BS EN 60601-1-3:1995(BS 5724-1.3:1995)General requirements for safety. Collateralstandard. General requirements for radiationprotection in diagnostic X-ray equipment
CH/62/2
This standard has been declared obsolescent as it issuperseded by BS EN 60601-1-3:2008 and will bewithdrawn on publication of the revisedBS EN 60601-2 series
BS HC 404:1977Specification for chromium-molybdenum alloycast iron ring pots (suitable for centrifugallycast and sand cast sealing rings, piston ringsand cylinder liners)
ACE/61/-/15
This standard has been re-declared as obsolescentfor a further period as it is no longer relevant
British Standards Declared Obsolescent continued...
18 Update Standards Dec 2008Prices may be subject to change.
BS 4361:—Woodworking machines
BS 4361-0:1990(ISO 7984:1988)Classification of woodworking machines andauxiliary machines used for woodworking
MTE/23
BS 4361-20:1990(ISO 7983:1988)Specification for single blade circular sawingmachines with travelling table
MTE/23
BS 4361-22:1990(ISO 7988:1988)Specification for double-end tenoning machines
MTE/23
BS 4361-23:1990(ISO 9264:1988)Nomenclature for narrow belt sandingmachines with sliding table or frame
MTE/23
BS 4361-24:1990(ISO 9265:1988)Nomenclature for multi-spindle boringmachines
MTE/23
BS 4361-25:1990(ISO 9266:1988)Nomenclature for universal tool and cuttersharpeners
MTE/23
BS 4361-26:1990(ISO 9267:1988)Nomenclature for bandsaw blade sharpeningmachines
MTE/23
BS 4540:—Sampling of spices and condiments
BS 4540-2:1982(ISO 2825:1981)Method for preparation of a ground sample foranalysis
AW/7
BS 4585:—Methods of test for spices and condiments
BS 4585-16:1990(ISO 7541:1989)Determination of total natural colouring mattercontent of ground (powdered) paprika
AW/7
BS EN 61810-5:1999Insulation coordination
EPL/94
Superseded by BS EN 61810-1:2004
BS ISO 14520:—Gaseous fire-extinguishing systems. Physicalproperties and system design
BS ISO 14520-12:2005IG-01 extinguishant
FSH/18/6
Superseded by BS EN 15004-7:2008
BS ISO 14520-13:2005IG-100 extinguishant
FSH/18/6
Superseded by BS EN 15004-8:2008
BS ISO 14520-14:2005IG-55 extinguishant
FSH/18/6
Superseded by BS EN 15004-9:2008
BS ISO 14520-15:2005IG-541 extinguishant
FSH/18/6
Superseded by BS EN 15004-10:2008
BRITISH STANDARDS UNDERREVIEW
The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.
Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by31 January, 2009, in order to beconsidered by the relevantUK Committee.
BS 3483:—Methods for testing pigments for paints
BS 3483-A1:1983(ISO 787-1:1982)Comparison of colour
STI/1
BS 3483-C3:1982(ISO 787-4:1981)Determination of acidity or alkalinity of theaqueous extract
STI/1
BS 6916:—Chain saws
BS 6916-5:1988Methods of evaluating chain brakeperformance
AGE/29
Superseded by BS ISO 6535:2008
BS 7412:2002Plastics windows made from unplasticizedpolyvinyl chloride (PVC-U) extruded hollowprofiles. Specification
B/538/1
Superseded by BS 7412:2007
BS EN 12475:—Classification of dense shaped refractoryproducts
BS EN 12475-3:1998Basic products containing from 7% to 30%residual carbon
RPI/1
Superseded by BS EN ISO 10081-3:2005
BS EN 12563:1999Non-active surgical implants. Joint replacementimplants. Specific requirements for hip jointreplacement implants
CH/150/4
Superseded by BS EN ISO 21535:2007
BS EN 60491:1997Safety requirements for electronic flashapparatus for photographic purposes
EPL/108
Superseded by BS EN 60065:2002
BS EN 60730:—Specification for automatic electrical controlsfor household and similar use
BS EN 60730-2:—Particular requirements
BS EN 60730-2-5:1995Automatic electrical burner control systems
CPL/72
Superseded by BS EN 60730-2-5:2002
BS EN 60730-2-8:1995Electrically operated water valves, includingmechanical requirements
CPL/72
Superseded by BS EN 60730-2-8:2002
BS EN 60730-2-9:1995Temperature sensing controls
CPL/72
Superseded by BS EN 60730-2-9:2002
BS EN 61810:—Electromechanical non-specified time all-or-nothing relays
BS EN 61810-1:1999General requirements
EPL/94
Superseded by BS EN 61810-1:2004
Update Standards Dec 2008 Prices may be subject to change. 19
BS EN ISO 3175-3:2003Procedure for testing performance whencleaning and finishing using hydrocarbonsolvent
TCI/82
BS EN ISO 3175-4:2003Procedure for testing performance whencleaning and finishing using simulatedwetcleaning
TCI/82
BS EN ISO 3262:—Extenders for paints. Specifications andmethods of test
BS EN ISO 3262-8:2000Natural clay
STI/1
BS EN ISO 3953:1995Metallic powders. Determination of tap density
ISE/65
BS EN ISO 4126:—Safety devices for protection against excessivepressure
BS EN ISO 4126-6:2003Application, selection and installation ofbursting disc safety devices
PVE/12
BS EN ISO 4618:2006Paints and varnishes. Terms and definitions
STI/11
BS EN ISO 4684:2005Leather. Chemical tests. Determination ofvolatile matter
TCI/69
BS EN ISO 4934:2003Steel and iron. Determination of sulfur content.Gravimetric method
ISE/18
BS EN ISO 10081:—Classification of dense shaped refractoryproducts
BS EN ISO 10081-1:2005Alumina-silica
RPI/1
BS EN ISO 10081-2:2005Basic products containing less than 7% residualcarbon
RPI/1
BS EN ISO 10081-3:2005Basic products containing from 7% to 50%residual carbon
RPI/1
BS EN ISO 10806:2003Pipework. Fittings for corrugated metal hoses
PSE/12
BS EN ISO 787-10:1995Determination of density. Pyknometer method
STI/1
BS EN ISO 787-11:1995Determination of tamped volume and apparentdensity after tamping
STI/1
BS EN ISO 787-18:1995Determination of residue on sieve. Mechanicalflushing procedure
STI/1
BS EN ISO 787-19:1995(BS 3483-C9:1995)Determination of water-soluble nitrates(Salicylic acid method)
STI/1
BS EN ISO 787-25:2006(ISO 787-25:1993)Comparison of the colour, in full-shade systems,of white, black and coloured pigments.Colorimetric method
STI/1
BS EN 975:—Sawn timber. Appearance grading ofhardwoods
BS EN 975-2:2004Poplars
B/543
BS EN 1116:2004Kitchen furniture. Co-ordinating sizes forkitchen furniture and kitchen appliances
FW/0
BS EN ISO 1248:2008Iron oxide pigments. Specifications andmethods of test
STI/1
BS EN 1957:2000Domestic furniture. Beds and mattresses. Testmethods for the determination of functionalcharacteristics
FW/0/2
BS EN ISO 2360:2003Non-conductive coatings on non-magneticelectrically conductive basis materials.Measurement of coating thickness. Amplitude-sensitive eddy current method
STI/33
BS EN ISO 3175:—Textiles. Dry cleaning and finishing
BS EN ISO 3175-1:1998Method for assessing the cleanability of textilesand garments
TCI/82
BS EN ISO 3175-2:1998Procedures for tetrachloroethene
TCI/82
BS 5072:—Methods of test for sodium fluoride forindustrial use
BS 5072-8:1980(ISO 3566:1976)Determination of chlorides content
CII/24
BS 6607:—Tool shanks with 7/24 taper for automatic toolchangers
BS 6607-4:1994(ISO 9524:1993)Specification for functional dimensions of frontfaces of spindle holders for machine centres
MTE/5
BS 7020:—Analysis of iron ores
BS 7020-8.1:1988(ISO 6830:1986)Methods for the determination of aluminiumcontent. Titrimetric method
ISE/58
BS 7745:—End mills with brazed helical hardmetal tips
BS 7745-1:1994(ISO 10145-1:1993)Dimensions of end mills with parallel shank
MTE/18
BS 7745-2:1994(ISO 10145-2:1993)Dimensions of end mills with taper shank
MTE/18
BS EN ISO 105:—Textiles. Tests for colour fastness
BS EN ISO 105-G02:1997Colour fastness to burnt-gas fumes
TCI/81
BS EN ISO 150:2007Raw, refined and boiled linseed oil for paintsand varnishes. Specifications and methods oftest
STI/3
BS EN ISO 787:—General methods of test for pigments andextenders
BS EN ISO 787-2:1995Determination of matter volatile at 105°C
STI/1
BS EN ISO 787-9:1995Determination of pH value of aqueoussuspension
STI/1
British Standards Under Review continued...
20 Update Standards Dec 2008Prices may be subject to change.
BS EN ISO 18104:2003Health informatics. Integration of a referenceterminology model for nursing
IST/35
BS EN ISO 18756:2005Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of fracturetoughness of monolithic ceramics at roomtemperature by the surface crack in flexure(SCF) method
RPI/13
BS EN ISO 18757:2005Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of specificsurface area of ceramic powders by gasadsorption using the BET method
RPI/13
BS EN ISO 19112:2005Geographic information. Spatial referencing bygeographic identifiers
IST/36
BS EN ISO 19133:2007Geographic information. Location basedservices. Tracking and navigation
IST/36
BS EN ISO 19135:2007Geographic information. Procedures for itemregistration
IST/36
BS EN ISO 19954:2003Footwear. Test methods for whole shoe.Washability in a domestic washing machine
TCI/69
BS EN ISO 20783:—Petroleum and related products. Determinationof emulsion stability of fire-resistant fluids
BS EN ISO 20783-1:2003Fluids in category HFAE
MCE/18/-/16
BS EN ISO 20783-2:2003Fluids in category HFB
MCE/18/-/16
BS EN ISO 21178:2006Light conveyor belts. Determination of electricalresistances
PRI/67
BS EN ISO 21179:2006Light conveyor belts. Determination of theelectrostatic field generated by a running lightconveyor belt
PRI/67
BS EN ISO 21180:2006Light conveyor belts. Determination of themaximum tensile strength
PRI/67
BS EN ISO 15732:2005Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for fracturetoughness of monolithic ceramics at roomtemperature by single edge precracked beam(SEPB) method
RPI/13
BS EN ISO 15874:—Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP)
BS EN ISO 15874-1:2003General
PRI/88/2
BS EN ISO 15874-2:2003Pipes
PRI/88/2
BS EN ISO 15874-5:2003Fitness for purpose of the system
PRI/88/2
BS EN ISO 15875:—Plastics piping systems for hot and cold waterinstallations. Crosslinked polyethylene (PE-X)
BS EN ISO 15875-1:2003General
PRI/88/2
BS EN ISO 15875-2:2003Pipes
PRI/88/2
BS EN ISO 15875-3:2003Fittings
PRI/88/2
BS EN ISO 15875-5:2003Fitness for purpose of the system
PRI/88/2
BS EN ISO 15876:—Plastics piping systems for hot and cold waterinstallations. Polybutylene (PB)
BS EN ISO 15876-1:2003General
PRI/88/2
BS EN ISO 15876-2:2003Pipes
PRI/88/2
BS EN ISO 15876-3:2003Fittings
PRI/88/2
BS EN ISO 15876-5:2003Fitness for purpose of the system
PRI/88/2
BS EN ISO 17834:2003Thermal spraying. Coatings for protectionagainst corrosion and oxidation at elevatedtemperatures
STI/40
BS EN ISO 10931:2005Plastics piping systems for industrialapplications. Poly(vinylidene fluoride) (PVDF).Specifications for components and the system
PRI/88/2
BS EN 13721:2004Furniture. Assessment of the surface reflectance
FW/0/1
BS EN 13722:2004Furniture. Assessment of the surface gloss
FW/0/1
BS EN 13802:2004Railway applications. Suspension components.Hydraulic dampers
RAE/3/-/4
BS EN 13990:2004Wood flooring. Solid softwood floor boards
B/543
BS EN 14073:—Office furniture. Storage furniture
BS EN 14073-2:2004Safety requirements
FW/0
BS EN 14073-3:2004Test methods for the determination of stabilityand strength of the structure
FW/0
BS EN 14074:2004Office furniture. Tables and desks and storagefurniture. Test methods for the determinationof strength and durability of moving parts
FW/0
BS EN 14076:2004Timber stairs. Terminology
B/543
BS EN ISO 14419:1999Textiles. Oil repellency. Hydrocarbon resistancetest
TCI/82
DD ENV 14464:2002Sawn timber. Method for assessment of case-hardening
B/543
BS EN ISO 14935:1999Petroleum and related products. Determinationof wick flame persistence of fire-resistant fluids
MCE/18/-/16
BS EN ISO 15236:—Steel cord conveyor belts
BS EN ISO 15236-1:2005Design, dimensions and mechanicalrequirements for conveyor belts for general use
PRI/67
Update Standards Dec 2008 Prices may be subject to change. 21
BS ISO 4010:1998Diesel engines. Calibrating nozzle, delay pintletype
MCE/22
BS ISO 5389:2005Turbocompressors. Performance test code
MCE/8
BS ISO 5391:2003Pneumatic tools and machines. Vocabulary
MCE/8
BS ISO 6264:1998Hydraulic fluid power. Pressure-relief valves.Mounting surfaces
MCE/18
BS ISO 6621:—Internal combustion engines. Piston rings
BS ISO 6621-2:2003Inspection measuring principles
MCE/14/-/10
BS ISO 6621-4:2003General specifications
MCE/14/-/10
BS ISO 6621-5:2005Quality requirements
MCE/14/-/10
BS ISO 6622:—Internal combustion engines. Piston rings
BS ISO 6622-1:2003Rectangular rings made of cast iron
MCE/14/-/10
BS ISO 6622-2:2003Rectangular rings made of steel
MCE/14/-/10
BS ISO 6624:—Internal combustion engines. Piston rings
BS ISO 6624-2:2003Half keystone rings made of cast iron
MCE/14/-/10
BS ISO 6624-4:2003Half keystone rings made of steel
MCE/14/-/10
BS ISO 6743:—Lubricants, industrial oils and related products(class L). Classification
BS ISO 6743-3:2003Family D (Compressors)
PTI/7
BS ISO 763:2003Fruit and vegetable products. Determination ofash insoluble in hydrochloric acid
AW/100
BS ISO 855:2003Oil of lemon [Citrus limon (L.) Burm. f.],obtained by expression
AW/54
BS ISO 1122:—Vocabulary of gear terms
BS ISO 1122-1:1998Definitions related to geometry
MCE/5
BS ISO 1505:1993Textile machinery. Widths relating to dyeingand finishing machines. Definitions and rangeof nominal widths
TCI/33
BS ISO 1919:1998Road vehicles. M14 x 1,25 spark plugs with flatseating and their cylinder head housings
MCE/9
BS ISO 2173:2003Fruit and vegetable products. Determination ofsoluble solids. Refractometric method
AW/100
BS ISO 2240:2003Photography. Colour reversal camera films.Determination of ISO speed
CPW/42
BS ISO 2344:1998Road vehicles. M14 x 1,25 spark plugs withconical seating and their cylinder head housings
MCE/9
BS ISO 2385:1993Corkwood in planks, virgin cork, cleanings, corkpieces, corkwood refuse and corkwaste.Sampling to determine moisture content
PRI/81
BS ISO 2534:1998Road vehicles. Engine test code. Gross power
MCE/22
BS ISO 2704:1998Road vehicles. M10 x 1 spark plugs with flatseating and their cylinder head housings
MCE/9
BS ISO 3519:2005Oil of lime distilled, Mexican type [Citrusaurantifolia (Christm.) Swingle]
AW/54
BS ISO 3761:2005Oil of rosewood, Brazilian type [Anibarosaeodora Ducke var. amazonica Ducke orAniba parviflora (Meissner) Mez]
AW/54
BS EN ISO 21181:2006Light conveyor belts. Determination of therelaxed elastic modulus
PRI/67
BS EN ISO 21182:2006Light conveyor belts. Determination of thecoefficient of friction
PRI/67
BS EN ISO 21183:—Light conveyor belts
BS EN ISO 21183-1:2006Principal characteristics and applications
PRI/67
BS EN ISO 21183-2:2006List of equivalent terms
PRI/67
BS EN ISO 23953:—Refrigerated display cabinets
BS EN ISO 23953-1:2005Vocabulary
RHE/19
BS EN ISO 23953-2:2005Classification, requirements and test conditions
RHE/19
BS ISO 5:—Photography. Density measurements
BS ISO 5-4:1995Geometric conditions for reflection density
CPW/42
BS ISO 76:2006Rolling bearings. Static load ratings
MCE/7
BS ISO 113:1999Rolling bearings. Plummer block housings.Boundary dimensions
MCE/7
BS ISO 155:1998Belt drives. Pulleys. Limiting values foradjustment of centres
MCE/10
BS ISO 199:2005Rolling bearings. Thrust bearings. Tolerances
MCE/7
BS ISO 254:1998Belt drives. Pulleys. Quality, finish and balance
MCE/10
BS ISO 762:2003Fruit and vegetable products. Determination ofmineral impurities content
AW/100
British Standards Under Review continued...
22 Update Standards Dec 2008Prices may be subject to change.
BS ISO 13357:—Petroleum products. Determination of thefilterability of lubricating oils
BS ISO 13357-2:2005Procedure for dry oils
MCE/18/-/16
BS ISO 13556:1998Road vehicles. Localization of exhaust systemleaks and equipment specifications
MCE/22
BS ISO 14469:—Road vehicles. Compressed natural gas (CNG)refuelling connector
BS ISO 14469-3:200625 MPa (250 bar) connector
GSE/40
BS ISO 14681:1998Diesel engines. Fuel injection pump testing.Calibrating fuel injectors
MCE/22
BS ISO 14794:2003Heavy commercial vehicles and buses. Brakingin a turn. Open-loop test methods
AUE/15
BS ISO 15237:2003Solid mineral fuels. Determination of totalmercury content of coal
PTI/16
BS ISO 15238:2003Solid mineral fuels. Determination of totalcadmium content of coal
PTI/16
BS ISO 15312:2003Rolling bearings. Thermal speed rating.Calculation and coefficients
MCE/7
BS ISO 16067:—Photography. Spatial resolution measurementsfor electronic scanners for photographic images
BS ISO 16067-1:2003Scanners for reflective media
CPW/42
BS ISO 16860:2005Hydraulic fluid power. Filters. Test method fordifferential pressure devices
MCE/18/-/6
BS ISO 16915:2003Tools for moulding. Sprue pullers
MTE/12
BS ISO 17080:2005Manually portable agricultural and forestrymachines and powered lawn and gardenequipment. Design principles for single-panelproduct safety labels
AGE/6
BS ISO 9848:2003Photography. Source document microfilms.Determination of ISO speed and ISO averagegradient
CPW/42
BS ISO 9947:2005Textile machinery and accessories. Two-for-onetwisters. Vocabulary
TCI/33
BS ISO 9981:1998Belt drives. Pulleys and V-ribbed belts for theautomotive industry. PK profile: Dimensions
MCE/10
BS ISO 9982:1998Belt drives. Pulleys and V-ribbed belts forindustrial applications. PH, PJ, PK, PL and PMprofiles. Dimensions
MCE/10
BS ISO 10054:1998Internal combustion compression-ignitionengines. Measurement apparatus for smokefrom engines operating under steady-stateconditions. Filter type smokemeter
MCE/22
BS ISO 10059:—Dense shaped refractory materials.Determination of cold compressive strength
BS ISO 10059-2:2003Test with packing
RPI/1
BS ISO 10458:1993Textile machinery. Square bars for windingdevices relating to dyeing and finishingmachines. Dimensions
TCI/33
BS ISO 11901:—Tools for pressing. Gas springs
BS ISO 11901-1:2003General specifications
MTE/12
BS ISO 12140:1998Agricultural machinery. Agricultural trailers andtrailed equipment. Drawbar jacks
AGE/6
BS ISO 13203:2006Chains, sprockets and accessories. List ofequivalent terms
MCE/1
BS ISO/IEC 13249:—Information technology. Database languages.SQL multimedia and application packages
BS ISO/IEC 13249-2:2003Full-text
IST/40
BS ISO/IEC 13249-5:2003Still image
IST/40
BS ISO 6966:—Aircraft ground equipment. Basic requirements
BS ISO 6966-1:2005General design requirements
ACE/57
BS ISO 6966-2:2005Safety requirements
ACE/57
BS ISO 6968:2005Aircraft ground equipment. Lower deck loader.Functional requirements
ACE/57
BS ISO 7063:2003Rolling bearings. Needle roller bearing trackrollers. Boundary dimensions and tolerances
MCE/7
BS ISO 7654:1998Road vehicles. Spin-on fuel filters for dieselengines. Mounting and connecting dimensions
MCE/21
BS ISO/IEC 7816:—Identification cards. Integrated circuit(s) cardswith contacts
BS ISO/IEC 7816-1:1998+A1:2003Physical characteristics
IST/17
BS ISO 8007:—Carbonaceous materials used in the productionof aluminium. Sampling plans and samplingfrom individual units
BS ISO 8007-3:2004Sidewall blocks
CII/24
BS ISO 8008:2005Aluminium oxide primarily used for theproduction of aluminium. Determination ofspecific surface area by nitrogen adsorption
CII/24
BS ISO 8404:2003Tools for moulding. Angle pins
MTE/12
BS ISO 8443:1999Rolling bearings. Radial ball bearings withflanged outer ring. Flange dimensions
MCE/7
BS ISO 8899:2003Oil of lemon petitgrain [Citrus limon (L.)Burm.f.]
AW/54
BS ISO 8900:2005Oil of bergamot petitgrain [Citrus bergamia(Risso et Poit.)]
AW/54
Update Standards Dec 2008 Prices may be subject to change. 23
BS 2M 52:1989(ISO 6772:1988)Method for impulse testing of hydraulic hose,tubing and fitting assemblies for aerospacefluid systems
ACE/69
BS M 55:1984(ISO 7257:1983)Method for rotary flexure testing of hydraulictubing joints and fittings for aerospace use
ACE/69
BS M 57:1985(ISO 7313:1984)Specification for high temperature convolutedhose assemblies in polytetrafluoroethylene(PTFE) for aerospace applications
ACE/69
BS M 61:1989(ISO 7315:1988)Specification for envelope dimensions of “P”clamps (loop clamps) for fluid systems
ACE/69
BS M 66:1987Specification for dimensions of ’Q’ clamps(centre-mounted clamps) for fluid systems
ACE/69
BS 3SP 89:1983(ISO 1002:1983)Specification for characteristics, boundarydimensions, tolerances and static load ratings ofairframe bearings
MCE/7
BS AU 259:1995(ISO 12667:1993)Specification for components for commercialvehicles and buses. Cross-tooth propeller shaftflanges, type T
AUE/13
NEW WORK STARTED
The reference number of the committeeresponsible for each item of new workstarted is given after each entry.
Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.
BS 476:—Fire tests on building materials and structures
BS 476-6:1989/Amendment 1Method of test for fire propagation forproducts
FSH/21/1
BS ISO 20462-3:2005Quality ruler method
CPW/42
BS ISO 20508:2003Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of lighttransmittance of ceramic films with transparentsubstrate
RPI/13
BS ISO 21093:2003Oil of dwarf pine (Pinus mugo Turra)
AW/54
BS ISO 21390:2005Oil of wintergreen, China [Gaultheriayunnanensis (Franch.) Rehd.], redistilled
AW/54
BS ISO 22029:2003Standard file format for spectral data exchange
CII/9
BS ISO 22234:2005Cinematography. Relative and absolute soundpressure levels for motion-picture multi-channelsound systems. Measurement methods andlevels applicable to analog photographic filmaudio, digital photographic film audio and D-cinema audio
CPW/36
BS ISO 24347:2005Agricultural vehicles. Mechanical connectionsbetween towed and towing vehicles.Dimensions of ball-type coupling device (80 mm)
AGE/6
BS 2A 296:1995(ISO 7913:1994)Bolts and screws, metric. Tolerances of form andposition
ACE/12
BS A 305:1994(ISO 7961:1994)Bolts. Test methods
ACE/12
BS 4G 173:—Specification for dimensions
BS 4G 173-2:1985(ISO 461-2:1985)Connectors for ground electrical supplies foraircraft
ACE/6
BS 2G 219:1983(ISO 6858:1982)Specification for general requirements forground support electrical supplies for aircraft
ACE/6
BS ISO 17455:2005Plastics piping systems. Multilayer pipes.Determination of the oxygen permeability ofthe barrier pipe
PRI/88/4
BS ISO 17559:2003Hydraulic fluid power. Electrically controlledhydraulic pumps. Test methods to determineperformance characteristics
MCE/18
BS ISO 17584:2005Refrigerant properties
RHE/18
BS ISO 18084:2005Press tools for tablets. Punches and dies
MTE/12
BS ISO 18573:2003Conveyor belts. Test atmospheres andconditioning periods
PRI/67
BS ISO 18653:2003Gears. Evaluation of instruments for themeasurement of individual gears
MCE/5/-/2
BS ISO 18929:2003Imaging materials. Wet-processed silver-gelatintype black-and-white photographic reflectionprints. Specifications for dark storage
CPW/42
BS ISO 19128:2005Geographic information. Web map serverinterface
IST/36
BS ISO 19334:2006Binders for paints and varnishes. Gum rosin.Gas-chromatographic analysis
STI/3
BS ISO 19438:2003Diesel fuel and petrol filters for internalcombustion engines. Filtration efficiency usingparticle counting and contaminant retentioncapacity
MCE/21/6
BS ISO 20203:2005Carbonaceous materials used in the productionof aluminium. Calcined coke. Determination ofcrystallite size of calcined petroleum coke by X-ray diffraction
CII/24
BS ISO 20462:—Photography. Psychophysical experimentalmethods for estimating image quality
BS ISO 20462-1:2005Overview of psychophysical elements
CPW/42
BS ISO 20462-2:2005Triplet comparison method
CPW/42
British Standards Under Review continued...
24 Update Standards Dec 2008Prices may be subject to change.
BS EN 299 (Revision)Oil pressure atomizing nozzles. Determinationof the angle and spray characteristics
will supersede BS EN 299:1999
GSE/27
BS EN 527:—Office furniture. Work tables and desks
BS EN 527-1 (Revision)Dimensions
will supersede BS EN 527-1:2000
FW/0/3
BS EN 794:—Lung ventilators
BS EN 794-3:1999/Amendment 2Particular requirements for emergency andtransport ventilators
CH/121/5
BS EN 795 (Revision)Protection against falls from a height. Anchordevices. Requirements and testing
will supersede BS EN 795:1997
PH/5
DD CEN/TS 81:—Safety rules for the construction and installationof lifts. Basics and interpretations
DD CEN/TS 81-11Interpretations related to EN 81 family ofstandards
MHE/4
BS EN 973 (Revision)Chemicals used for treatment of water intendedfor human consumption. Sodium chloride forregeneration of ion exchangers
will supersede BS EN 973:2002
CII/59
PD CEN/TR XXXXTextiles. Cosmetotextiles
TCI/80
BS EN 1060:—Specification for non-invasivesphygmomanometers
BS EN 1060-1:1996/Amendment 2General requirements
CH/205/10
BS EN 1060-2:1996/Amendment 1Supplementary requirements for mechanicalsphygmomanometers
CH/205/10
BS EN 1060-3:1997/Amendment 2Supplementary requirements for electro-mechanical blood pressure measuring systems
CH/205/10
BS 8527Aggregates. Aggregates for unbound andhydraulically bound materials for use in civilengineering works and road construction.Guidance on the use of BS EN 13242
B/502
BS 8528Aggregates. Armourstone. Guidance on the useof BS EN 13383-1
B/502
BS 8551Water quality. Guide to assuring potable waterquality in temporary supply situations
EH/3
BS EN 31 (Revision)Pedestal wash basins. Connecting dimensions
will supersede BS EN 31:1999
B/503
BS EN 33 (Revision)Pedestal W.C. pans with close-coupled flushingcistern. Connecting dimensions
will supersede BS EN 33:2003
B/503
BS EN 71:—Safety of toys
BS EN 71-4 (Revision)Experimental sets for chemistry and relatedactivities
will supersede BS EN 71-4:1998+A3:2007
CW/15
BS EN WI 00216061Chemical disinfectants and antiseptics.Chemical-thermal linen disinfection. Testmethod and requirements (phase 2, step 2)
CH/216
BS EN WI CSF05025Weigh-in-motion of road vehicles
PRI/69
BS EN 115:—Safety of escalators and moving walks
BS EN 115-2Rules for the improvement of safety of existingescalators and moving walks
MHE/4
BS EN 131:—Ladders
BS EN 131-3 (Revision)User instructions
will supersede BS EN 131-3:2007
B/512
BS EN 285:2006+A1:2008/Amendment 2Sterilization. Steam sterilizers. Large sterilizers
LBI/35
BS 1916:—Limits and fits for engineering
BS 1916-1 (Revision)Limits and tolerances
will supersede BS 1916-1:1953
TDW/4
BS 1916-2 (Revision)Guide to the selection of fits in BS 1916-1
will supersede BS 1916-2:1953
TDW/4
BS 1916-3 (Revision)Recommendations for tolerances, limits and fitsfor large diameters
will supersede BS 1916-3:1963
TDW/4
BS 3655:1981/Amendment 1Recommendations for informative labelling oftextile floor coverings
PRI/3
BS 4311:—Specification for gauge blocks and accessories
BS 4311-2 (Revision)Accessories
will supersede BS 4311-2:1994
TDW/4
BS 4500 (Revision)ISO limits and fits. Guidance
will supersede BS 4500-4:1985 and BS 4500-5:1988
TDW/4
BS 6915:2001/Amendment 1Design and construction of fully supported leadsheet roof and wall coverings. Code of practice
B/542/11
BS 8204:—Screeds, bases and in situ floorings
BS 8204-1:2003/Amendment 1Concrete bases and cement sand levellingscreeds to receive floorings. Code of practice
B/507/6
BS 8204-2:2003/Amendment 1Concrete wearing surfaces. Code of practice
B/507/6
BS 8204-3:2004/Amendment 1Polymer modified cementitious levelling screedsand wearing screeds. Code of practice
B/507/6
BS 8409 (Revision)Soft indoor play areas. Code of practice
will supersede BS 8409:2002
SW/65/5
BS 8526Aggregates. Aggregates for concrete. Guidanceon the use of BS EN 12620
B/502
Update Standards Dec 2008 Prices may be subject to change. 25
BS EN 12006:—Non-active surgical implants. Particularrequirements for cardiac and vascular implants
BS EN 12006-2:1998/Amendment 1Vascular prostheses including cardiac valveconduits
CH/150/2
BS EN 12006-3:1999/Amendment 1Endovascular devices
CH/150/2
BS EN 12342:1998/Amendment 1Breathing tubes intended for use withanaesthetic apparatus and ventilators
CH/121/5
BS EN 12470:—Clinical thermometers
BS EN 12470-1:2000/Amendment 1Metallic liquid-in-glass thermometers withmaximum device
LBI/36/3
BS EN 12470-2:2001/Amendment 1Phase change type (dot matrix) thermometers
LBI/36/3
BS EN 12470-3:2000/Amendment 1Performance of compact electricalthermometers (non-predictive and predictive)with maximum device
LBI/36/3
BS EN 12470-4:2001/Amendment 1Performance of electrical thermometers forcontinuous measurement
LBI/36/3
BS EN 12470-5:2003/Amendment 1Performance of infra-red ear thermometers(with maximum device)
LBI/36/3
BS EN 12735:—Copper and copper alloys. Seamless, roundcopper tubes for air conditioning andrefrigeration
BS EN 12735-1 (Revision)Tubes for piping systems
will supersede BS EN 12735-1:2001
NFE/34/1
BS EN 12735-2 (Revision)Tubes for equipment
will supersede BS EN 12735-2:2001
NFE/34/1
BS EN 13060:2004/Amendment 1Small steam sterilizers
LBI/35
BS EN 13060:2004/Amendment 2Small steam sterilizers
LBI/35
BS EN 3155-075Contacts, electrical, quadrax, size 8, female,type E, crimp, class R. Product standard
ACE/6
BS EN 3475:—Aerospace series. Cables, electrical, aircraft use.Test methods
BS EN 3475-100 (Revision)General
will supersede BS EN 3475-100:2002
ACE/6
BS EN 4652:—Aerospace series. Connectors, coaxial,radiofrequency
BS EN 4652-001Technical specification
ACE/6
BS EN 4652-002Specification of performances
ACE/6
PD CEN/TR 4653Aerospace series. Technical specification ofplating of connectors cadmium and hexavalentchromium replacement
ACE/6
BS EN 4673:—Aerospace series. Inserts, UNJ threads, self-locking, self-broaching keys
BS EN 4673-003Technical specification
ACE/12
PD CEN/TR 4676Aerospace series. Aluminium pigmentedcoatings. List of commercial products
ACE/12
BS EN ISO 8359 (Revision)Medical electrical equipment. Oxygenconcentrators for medical use. Safetyrequirements
will supersede BS EN ISO 8359:1997
CH/121/5
BS EN ISO 8835:—Inhalational anaesthesia systems
BS EN ISO 8835-2 (Revision)Anaesthetic breathing systems
will supersede BS EN ISO 8835-2:2007
CH/121
BS EN ISO 9360:—Anaesthetic and respiratory equipment. Heatand moisture exchangers (HMEs) forhumidifying respired gases in humans
BS EN ISO 9360-2 (Revision)HMEs for use with tracheostomized patientshaving minimum tidal volumes of 250 ml
will supersede BS EN ISO 9360-2:2002
CH/121
BS EN 1276 (Revision)Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in food, industrial,domestic, and institutional areas. Test methodand requirements (phase 2, step 1)
will supersede BS EN 1276:1997
CH/216
BS EN 1282:—Tracheostomy tubes
BS EN 1282-2:1997/Amendment 1Paediatric tubes
CH/121/5
BS EN 1536 (Revision)Execution of special geotechnical work. Boredpiles
will supersede BS EN 1536:2000
B/526
BS EN 1538 (Revision)Execution of special geotechnical works.Diaphragm walls
will supersede BS EN 1538:2000
B/526
BS EN 1656 (Revision)Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsused in veterinary field. Test method andrequirements (phase 2/step 1)
will supersede BS EN 1656:2000
CH/216
BS EN 1782:1998/Amendment 1Tracheal tubes and connectors
CH/121/5
BS EN 1820:2005/Amendment 1Anaesthetic reservoir bags
CH/121/5
BS EN 3155:—Aerospace series. Electrical contacts used inelements of connection
BS EN 3155-032Contacts, electrical, coaxial, 50 ohms, size 5,male, type D, crimp, class R. Product standard
ACE/6
BS EN 3155-033Contacts, electrical, coaxial, 50 ohms, size 5,female, type D, crimp, class R. Product standard
ACE/6
BS EN 3155-063Contacts, electrical, coaxial, 50 ohms, size 1,male, type D, solder, class R. Product standard
ACE/6
BS EN 3155-064Contacts, electrical, coaxial, 50 ohms, size 1,female, type D, solder, class R. Product standard
ACE/6
New Work Started continued...
26 Update Standards Dec 2008Prices may be subject to change.
BS EN 60601:—Medical electrical equipment
BS EN 60601-1:2006/Amendment 1General requirements for basic safety andessential performance
CH/62/1
BS EN 60601-1-6 (Revision)General requirements for basic safety andessential performance. Collateral standard.Usability
will supersede BS EN 60601-1-6:2007
CH/62/1
BS EN 60601-2-62Particular requirements for basic safety andessential performance of high intensitytherapeutic ultrasound (HITU) system
CH/62/4
BS EN 60728:—Cable networks for television signals, soundsignals and interactive services
BS EN 60728-11 (Revision)Safety
will supersede BS EN 60728-11:2005
EPL/100
BS EN 60811:—Insulating and sheathing materials of electriccables. Common test methods
BS EN 60811-100General
GEL/20/17
BS EN 60811-201Measurement of insulation thickness
will partially supersede BS EN 60811-1.1:1995
GEL/20/17
BS EN 60811-202Measurement of thickness and overalldimensions
will partially supersede BS EN 60811-1.1:1995
GEL/20/17
BS EN 60811-203Measurement of overall dimensions
will partially supersede BS EN 60811-1.1:1995
GEL/20/17
BS EN 60811-301Measurement of the permittivity at 23°C offilling compounds
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 60811-302Measurement of the D.C. resistivity at 23°C and100°C of filling
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 15643:—Sustainability of construction works.Sustainability assessment of buildings
BS EN 15643-1General framework
B/558
BS EN 15643-2Framework for the assessment ofenvironmental performance
B/558
BS EN 15890Fixed vertical road traffic signs. Visualperformance of retroreflective sheetingmaterials
B/509/3
BS EN 15892Railway applications. Noise emission.Measurement of noise inside driver’s cabs
RAE/1
DD CEN ISO/TS 17575:—Electronic fee collection. Application interfacedefinition for autonomous systems
DD CEN ISO/TS 17575-1Charging
EPL/278
DD CEN ISO/TS 17575-2Communication and connection to the lowerlayers
EPL/278
BS EN ISO 21427:—Water quality. Evaluation of genotoxicity bymeasurement of the induction of micronuclei
BS EN ISO 21427-2Mixed population method using the cell lineV79
will supersede BS ISO 21427-2:2006
EH/3/5
BS EN 60086:—Primary batteries
BS EN 60086-5:2005/Amendment 1Safety of batteries with aqueous electrolyte
CPL/35
BS EN 60268:—Sound system equipment
BS EN 60268-4 (Revision)Microphones
will supersede BS EN 60268-4:2004
EPL/100
BS EN 13241:—Industrial, commercial and garage doors andgates. Product standard
BS EN 13241-1:2003/Amendment 1Products without fire resistance or smokecontrol characteristics
B/538
BS EN 13544:—Respiratory therapy equipment
BS EN 13544-2:2002/Amendment 1Tubing and connectors
CH/121/5
BS EN 13544-3:2001/Amendment 1Air entrainment devices
CH/121/5
BS EN 13633Building hardware. Electrically controlled panicexit systems for use on escape routes.Requirements and test methods
B/538
BS EN 13637Building hardware. Electrically controlledemergency exit systems for use on escaperoutes. Requirements and test methods
B/538
BS EN 13724 (Revision)Postal services. Apertures of private letter boxesand letter plates. Requirements and testmethods
will supersede BS EN 13724:2002
SVS/4
BS EN 13751 (Revision)Foodstuffs. Detection of irradiated food usingphotostimulated luminescence
will supersede BS EN 13751:2002
AW/-/3
BS EN 13798 (Revision)Hydrometry. Specification for a referenceraingauge pit
will supersede BS EN 13798:2002
CPI/113/5
BS EN 13867:2002/Amendment 1Concentrates for haemodialysis and relatedtherapies
CH/105/2
BS EN 14081:—Timber structures. Strength graded structuraltimber with rectangular cross section
BS EN 14081-2 (Revision)Machine grading. Additional requirements forinitial type testing
will supersede BS EN 14081-2:2005
B/518
Update Standards Dec 2008 Prices may be subject to change. 27
BS EN 60811-512Tensile strength and elongation at break afterconditioning at elevated temperature; methodsspecific to polyethylene and polypropylenecompounds
will partially supersede BS EN 60811-4-2:2004
GEL/20/17
BS EN 60811-513Methods specific to polyethylene andpolypropylene compounds. Wrapping test afterconditioning
will partially supersede BS EN 60811-4-2:2004
GEL/20/17
BS EN 60811-601Methods specific of the drop-point to fillingcompounds
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 60811-602Separation of oil in filling compounds
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 60811-603Measurement of total acid number of fillingcompounds
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 60811-604Measurement of absence of corrosive gassescomponents in filling compounds
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 60811-605Measurement of carbon black
will partially supersede BS EN 60811-4-1:2004
GEL/20/17
BS EN 60811-606Methods for determining the density
will partially supersede BS EN 60811-1.3:1995
GEL/20/17
BS EN 60811-607Test for the assessment of carbon blackdispersion in polyethylene and polypropylene
will partially supersede BS EN 60811-4-1:2004
GEL/20/17
BS EN 61169:—Radio-frequency connectors
BS EN 61169-18Sectional specification. Radio frequency coaxialconnectors of type SSMA
EPL/46/2
BS EN 60811-501Tests for determining the mechanical propertiesinsulating and sheathing compounds
will partially supersede BS EN 60811-1.1:1995
GEL/20/17
BS EN 60811-502Shrinkage test for insulations
will partially supersede BS EN 60811-1.3:1995
GEL/20/17
BS EN 60811-503Shrinkage test for sheaths
will partially supersede BS EN 60811-1.3:1995
GEL/20/17
BS EN 60811-504Bending tests at low temperature for insulationand sheaths
will partially supersede BS EN 60811-1-4:1995
GEL/20/17
BS EN 60811-505Elongation at low temperature for insulationsand sheaths
will partially supersede BS EN 60811-1-4:1995
GEL/20/17
BS EN 60811-506Impact test at low temperature for insulationsand sheaths
will partially supersede BS EN 60811-1-4:1995
GEL/20/17
BS EN 60811-507Hot set test for cross-linked materials
will partially supersede BS EN 60811-2-1:1998
GEL/20/17
BS EN 60811-508Pressure test at high temperature for insulationand sheaths
will partially supersede BS EN 60811-3.1:1995
GEL/20/17
BS EN 60811-509Tests for resistance of insulations and sheaths tocracking
will partially supersede BS EN 60811-3.1:1995
GEL/20/17
BS EN 60811-510Methods specific to polyethylene andpolypropylene compounds. Wrapping test afterthermal ageing in air
will partially supersede BS EN 60811-4-2:2004
GEL/20/17
BS EN 60811-511Measurement of the melt flow index ofpolyethylene and polypropylene compounds
will partially supersede BS EN 60811-4-1:2004
GEL/20/17
BS EN 60811-401Thermal ageing methods. Ageing in an air oven
will partially supersede BS EN 60811-1.2:1995
GEL/20/17
BS EN 60811-402Water absorption tests
will partially supersede BS EN 60811-1.3:1995
GEL/20/17
BS EN 60811-403Ozone resistance test on elastomericcompounds
will partially supersede BS EN 60811-2-1:1998
GEL/20/17
BS EN 60811-404Mineral oil immersion test for sheaths madewith elastomeric compounds
will partially supersede BS EN 60811-2-1:1998
GEL/20/17
BS EN 60811-405Thermal stability test for PVC insulations andPVC sheaths
will partially supersede BS EN 60811-3.2:1995
GEL/20/17
BS EN 60811-406Resistance to environmental stress cracking ofpolyethylene and polypropylene compounds
will partially supersede BS EN 60811-4-1:2004
GEL/20/17
BS EN 60811-407Measurement of mass increase of polyethyleneand polypropylene compounds
will partially supersede BS EN 60811-4-2:2004
GEL/20/17
BS EN 60811-408Long-term stability test of polyethylene andpolypropylene compounds
will partially supersede BS EN 60811-4-2:2004
GEL/20/17
BS EN 60811-409Loss of mass test for thermoplastic insulationsand sheaths
will partially supersede BS EN 60811-3.2:1995
GEL/20/17
BS EN 60811-410Test method for copper-catalysed oxidativedegradation of polyolefin insulated conductors
will partially supersede BS EN 60811-4-2:2004
GEL/20/17
BS EN 60811-411Lower temperature brittleness of fillingcompounds
will partially supersede BS EN 60811-5.1:2000
GEL/20/17
BS EN 60811-412Thermal ageing methods. Ageing in an airbomb
will partially supersede BS EN 60811-1.2:1995
GEL/20/17
New Work Started continued...
28 Update Standards Dec 2008Prices may be subject to change.
BS ISO 4602 (Revision)Reinforcements. Woven fabrics. Determinationof number of yarns per unit length of warp andweft
will supersede BS ISO 4602:1997
PRI/42
BS ISO 4901Reinforced plastics based on unsaturatedpolyester resins. Determination of residualstyrene monomer content
will supersede BS 2782-4:Method 432A:1991
PRI/42
BS ISO 6356 (Revision)Textile floor coverings. Assessment of staticelectrical propensity. Walking test
will supersede BS ISO 6356:2000
PRI/3
BS ISO 6498:—Animal feeding stuffs. Preparation of testsamples
BS ISO 6498-1Terms and definitions
will partially supersede BS 5766-10:1999
AW/10
BS ISO 6498-2Guidelines
will partially supersede BS 5766-10:1999
AW/10
BS ISO 6721:—Plastics. Determination of dynamic mechanicalproperties
BS ISO 6721-11Glass transition temperature
PRI/21
BS ISO 7010:2003/Amendment 61Graphical symbols. Safety colours and safetysigns. Safety signs used in workplaces andpublic areas
PH/8/1
BS ISO 7718:—Aircraft. Passenger doors interface requirementsfor connection of passenger boarding bridge
BS ISO 7718-1Main deck doors
ACE/57
BS ISO 7792:—Plastics. Thermoplastic polyester (TP) mouldingand extrusion materials
BS ISO 7792-1Designation system and basis for specifications
will supersede BS EN ISO 7792-1:2004
PRI/82
BS ISO 7792-2Preparation of test specimens anddetermination of properties
will supersede BS EN ISO 7792-2:2004
PRI/82
BS ISO 1043:—Plastics. Symbols and abbreviated terms
BS ISO 1043-1Basic polymers and their special characteristics
will supersede BS EN ISO 1043-1:2002
PRI/10
BS ISO 1060:—Plastics. Homopolymer and copolymer resins ofvinyl chloride
BS ISO 1060-2Preparation of test samples and determinationof properties
will supersede BS EN ISO 1060-2:1999
PRI/82
BS ISO 1658:—Natural rubber (NR)
BS ISO 1658-2Evaluation procedure
will supersede BS 5738:1980
PRI/50/-/1
BS ISO 1872:—Plastics. Polyethylene (PE) moulding andextrusion materials
BS ISO 1872-2Preparation of test specimens anddetermination of properties
will supersede BS EN ISO 1872-2:2007
PRI/82
BS ISO 1926 (Revision)Rigid cellular plastics. Determination of tensileproperties
will supersede BS ISO 1926:2005
PRI/24
BS ISO 2076 (Revision)Textiles. Man-made fibres. Generic names
will supersede BS ISO 2076:1999
TCI/24
BS ISO 3767:—Tractors, machinery for agriculture and forestry,powered lawn and garden equipment. Symbolsfor operator controls and other displays
BS ISO 3767-2 (Revision)Symbols for agricultural tractors and machinery
will supersede BS ISO 3767-2:1991
AGE/6
BS ISO 4000:—Passenger car tyres and rims
BS ISO 4000-1 (Revision)Tyres (metric series)
will supersede BS ISO 4000-1:2007
AUE/4
BS EN 61169-19Sectional specification. Radio frequency coaxialconnectors of type SSMB
EPL/46/2
BS EN 61169-35Sectional specification. Radio frequency coaxialconnectors of type 2, 92
EPL/46/2
BS EN 61169-41Sectional specification. Radio frequency coaxialconnectors of type CQA
EPL/46/2
BS EN 61169-42Sectional specification. Radio frequency coaxialconnectors of type CQN
EPL/46/2
BS EN 62595Measurement methods of LED backlight unitfor liquid crystal displays
EPL/47
BS EN 62604:—Surface Acoustic Wave (SAW) and Bulk AcousticWave (BAW) dupliexers
BS EN 62604-2Guide to the use
EPL/49
BS ISO 5:—Photography and graphic technology. Densitymeasurements
BS ISO 5-1Terms, symbols and notations
will supersede BS 1384-1:1985
CPW/42
BS ISO 5-2Geometric conditions for transmission density
will supersede BS 1384-2:2001
CPW/42
BS ISO 5-3 (Revision)Spectral conditions
will supersede BS ISO 5-3:1995
CPW/42
BS ISO 5-4 (Revision)Geometric conditions for reflection density
will supersede BS ISO 5-4:1995
CPW/42
BS ISO 294:—Plastics. Injection moulding of test specimens ofthermoplastic materials
BS ISO 294-2Small tensile bars
will supersede BS EN ISO 294-2:1998
PRI/21
Update Standards Dec 2008 Prices may be subject to change. 29
DD ISO/TS 10303-1003Application module. Curve appearance
AMT/4
DD ISO/TS 10303-1004Application module. Elemental geometric shape
AMT/4
DD ISO/TS 10303-1007Application module. General surfaceappearance
AMT/4
DD ISO/TS 10303-1008Application module. Layer assignment
AMT/4
DD ISO/TS 10303-1009Application module. Shape appearance layers
AMT/4
DD ISO/TS 10303-1012Application module. Approval
AMT/4
DD ISO/TS 10303-1022Application module. Part and versionidentification
AMT/4
DD ISO/TS 10303-1025Application module. Alias identification
AMT/4
DD ISO/TS 10303-1026Application module. Assembly structure
AMT/4
DD ISO/TS 10303-1027Application module. Contextual shapepositioning
AMT/4
DD ISO/TS 10303-1032Application module. Shape property assignment
AMT/4
DD ISO/TS 10303-1040Application module. Process propertyassignment
AMT/4
DD ISO/TS 10303-1103Application module. Product class
AMT/4
DD ISO/TS 10303-1104Application module. Specified product
AMT/4
DD ISO/TS 10303-1106Application module. Extended measurerepresentation
AMT/4
DD ISO/TS 10303-1109Application module. Alternative solution
AMT/4
BS ISO 9241-420Selection procedures for physical input devices
PH/9
BS ISO 9801Ophthalmic instruments. Trial case lenses
will supersede BS EN ISO 9801:1999
CH/172/6
BS ISO 10203 (Revision)Iron ores. Determination of calcium content.Flame atomic absorption spectrometric method
will supersede BS ISO 10203:2006
ISE/58
BS ISO 10204 (Revision)Iron ores. Determination of magnesiumcontent. Flame atomic absorption spectrometricmethod
will supersede BS ISO 10204:2006
ISE/58
BS ISO 10303:—Industrial automation systems and integration.Product data representation and exchange
BS ISO 10303-58Integrated generic resource. Risk
AMT/4
BS ISO 10303-61Integrated generic resource. Systemsengineering representation
AMT/4
BS ISO 10303-229Application protocol. Exchange ofmanufacturing product information for forgedparts
AMT/4
BS ISO 10303-233Systems engineering data representation
AMT/4
BS ISO 10303-1264Application module. Risk
AMT/4
BS ISO 10303-1785Application module. Analysis representation
AMT/4
DD ISO/TS 10303:—Industrial automation systems and integration.Product data representation and exchange
DD ISO/TS 10303-403Application module. AP203 Configurationcontrolled 3D design of mechanical parts andassemblies
AMT/4
DD ISO/TS 10303-1001Application module. Appearance assignment
AMT/4
DD ISO/TS 7849:—Acoustics. Determination of airborne soundpower levels emitted by machinery usingvibration measurement
DD ISO/TS 7849-1Survey method estimating an upper limit of theA-weighted sound power level
EH/1
BS ISO 7919:—Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts
BS ISO 7919-2 (Revision)Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600r/min
will supersede BS ISO 7919-2:2001
GME/21/5
BS ISO 8566:—Cranes. Cabins
BS ISO 8566-1General
MHE/3/5
BS ISO 8566-3Tower cranes
MHE/3/5
BS ISO 8596Ophthalmic optics. Visual acuity testing.Standard optotype and its presentation
will supersede BS EN ISO 8596:1996
CH/172/3
BS ISO 8695Tools for pressing. Punches. Nomenclature andterminology
will supersede BS 7568-1:1992
MTE/12
BS ISO 8820:—Road vehicles. Fuse-links
BS ISO 8820-4Fuse-links with female contacts (Type A) andbolt-in contacts (Type B) and their test fixtures
AUE/16
BS ISO 8873:—Rigid cellular plastics
BS ISO 8873-1Spray-applied polyurethane foam for thermalinsulation
PRI/72
BS ISO 9241:—Ergonomic requirements for office work withvisual display terminals (VDTs)
BS ISO 9241-129Guidance on software individualization
PH/9
New Work Started continued...
30 Update Standards Dec 2008Prices may be subject to change.
DD ISO/TS 10303-1433Application module. Project management
AMT/4
DD ISO/TS 10303-1434Application module. Project managementresource information
AMT/4
DD ISO/TS 10303-1435Application module. Organization structure
AMT/4
DD ISO/TS 10303-1436Application module. Project breakdown
AMT/4
DD ISO/TS 10303-1437Application module. Schedule
AMT/4
DD ISO/TS 10303-1438Application module. Work structure
AMT/4
DD ISO/TS 10303-1450Application module. System structure
AMT/4
DD ISO/TS 10303-1453Application module. Function based behaviour
AMT/4
DD ISO/TS 10303-1509Application module. Manifold surface
AMT/4
DD ISO/TS 10303-1514Application module. Advanced boundaryrepresentation
AMT/4
DD ISO/TS 10303-1628Application module. Design product datamanagement
AMT/4
DD ISO/TS 10303-1654Application module. Characteristic
AMT/4
DD ISO/TS 10303-1655Application module. Chemical substance
AMT/4
DD ISO/TS 10303-1667Application module. Extended basic geometry
AMT/4
DD ISO/TS 10303-1681Application module. Generic material aspects
AMT/4
DD ISO/TS 10303-1702Application module. Manifold subsurface
AMT/4
DD ISO/TS 10303-1252Application module. Probability
AMT/4
DD ISO/TS 10303-1255Application module. State definition
AMT/4
DD ISO/TS 10303-1256Application module. State observed
AMT/4
DD ISO/TS 10303-1262Application module. Task specification
AMT/4
DD ISO/TS 10303-1274Application module. Probability distribution
AMT/4
DD ISO/TS 10303-1275Application module. External class
AMT/4
DD ISO/TS 10303-1281Application module. Resource itemcharacterized
AMT/4
DD ISO/TS 10303-1282Application module. Resource managementcharacterized
AMT/4
DD ISO/TS 10303-1283Application module. Resource as realizedcharacterized
AMT/4
DD ISO/TS 10303-1291Application module. Plib class reference
AMT/4
DD ISO/TS 10303-1342Application module. Expression
AMT/4
DD ISO/TS 10303-1345Application module. Item definition structure
AMT/4
DD ISO/TS 10303-1349Application module. Incomplete data referencemechanism
AMT/4
DD ISO/TS 10303-1366Application module. Tagged text representation
AMT/4
DD ISO/TS 10303-1367Application module. Textual expressionrepresentation
AMT/4
DD ISO/TS 10303-1371Application module. State based behaviourrepresentation
AMT/4
DD ISO/TS 10303-1110Application module. Surface conditions
AMT/4
DD ISO/TS 10303-1111Application module. Classification withattributes
AMT/4
DD ISO/TS 10303-1112Application module. Specification control
AMT/4
DD ISO/TS 10303-1115Application module. Part collection
AMT/4
DD ISO/TS 10303-1129Application module. External properties
AMT/4
DD ISO/TS 10303-1130Application module. Derived shape element
AMT/4
DD ISO/TS 10303-1131Application module. Construction geometry
AMT/4
DD ISO/TS 10303-1132Application module. Associative text
AMT/4
DD ISO/TS 10303-1136Application module. Text appearance
AMT/4
DD ISO/TS 10303-1140Application module. Requirement identificationand version
AMT/4
DD ISO/TS 10303-1206Application module. Draughting annotation
AMT/4
DD ISO/TS 10303-1215Application module. Physical breakdown
AMT/4
DD ISO/TS 10303-1216Application module. Functional breakdown
AMT/4
DD ISO/TS 10303-1231Application module. Product data management
AMT/4
DD ISO/TS 10303-1233Application module. Requirement assignment
AMT/4
DD ISO/TS 10303-1248Application module. Product breakdown
AMT/4
Update Standards Dec 2008 Prices may be subject to change. 31
BS ISO/IEC 11693:—Identification cards. Optical memory cards.General characteristics
BS ISO/IEC 11693-1Co-existence of optical memory with othermachine-readable technologies
IST/17
BS ISO 11783:—Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network
BS ISO 11783-14Sequence control
AGE/32
BS ISO 11981Ophthalmic optics. Contact lenses and contactlens care products. Determination of physicalcompatibility of contact lens care products withcontact lenses
will supersede BS EN ISO 11981:1999
CH/172
BS ISO 12460:—Wood-based panels. Determination offormaldehyde release
BS ISO 12460-5Perforator method
B/541
DD ISO/TS 12854Gaseous media fire extinguishing systems.Physical properties and system design. Scalingfactors for Class B fuels other than heptane
FSH/18/6
BS ISO 12856Plastic railway sleepers
RAE/2
PD ISO/TR 12888:—Selected illustrations of gauge repeatability andreproducibility studies
PD ISO/TR 12888-1Continuous variables
SS/4
BS ISO 13351Fans for general purposes. Dimensions
will supersede BS 848-4:1997
MCE/17
DD ISO/TS 13584:—Industrial automation systems and integration.Parts library
DD ISO/TS 13584-35Implementation resources. Spreadsheet datainterface for parts library
AMT/4
BS ISO 10816:—Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts
BS ISO 10816-2 (Revision)Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600r/min
will supersede BS ISO 10816-2:2001
GME/21/5
BS ISO 10927Determination of molecular mass and molecularmass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDITOF-MS)
PRI/21
BS ISO 10944Ophthalmic instruments. Synoptophores
will supersede BS EN ISO 10944:1998
CH/172/6
BS ISO 10972:—Cranes. Requirements for mechanisms
BS ISO 10972-2 (Revision)Mobile cranes
will supersede BS ISO 10972-1:1998
MHE/3/5
BS ISO 11093:—Paper and board. Testing of cores
BS ISO 11093-5 (Revision)Determination of characteristics of concentricrotation
will supersede BS ISO 11093-5:1994
PAI/11
BS ISO 11237:—Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulicapplications. Specification
BS ISO 11237-1 (Revision)Oil-based fluid applications
will supersede BS ISO 11237-1:2005
PRI/66
BS ISO 11237-2 (Revision)Water-based fluid applications
will supersede BS ISO 11237-2:2006
PRI/66
BS ISO 11339Adhesives. T-peel test for flexible-to-flexiblebonded assemblies
will supersede BS EN ISO 11339:2005
PRI/52
BS ISO 11382Optical materials and components.Characterization of optical materials used in theinfrared spectral range from 0,78 um to 100 um
CPW/172/3
DD ISO/TS 10303-1715Application module. Part occurrence
AMT/4
DD ISO/TS 10303-1749Application module. Styled curve
AMT/4
DD ISO/TS 10303-1750Application module. Text representation
AMT/4
DD ISO/TS 10303-1753Application module. Value with unit extension
AMT/4
DD ISO/TS 10303-1760Application module. Pre defined product datamanagement specializations
AMT/4
DD ISO/TS 10303-1762Application module. Generic productoccurrence
AMT/4
DD ISO/TS 10303-1784Application module. External analysisrepresentation
AMT/4
BS ISO 10341Ophthalmic instruments. Refractor heads
will supersede BS EN ISO 10341:1999
CH/172/6
BS ISO 10343Ophthalmic instruments. Ophthalmometers
will supersede BS EN ISO 10343:1999
CH/172/6
BS ISO 10352Fibre-reinforced plastics. Moulding compoundsand prepregs. Determination of mass per unitarea
will supersede BS EN ISO 10352:1997
PRI/42
BS ISO/IEC 10373:—Identification cards. Test methods
BS ISO/IEC 10373-6 (Revision)Proximity cards
will supersede BS ISO/IEC 10373-6:2001+A5:2007
IST/17
BS ISO 10685:—Ophthalmic optics. Spectacle frames electroniccatalogue and identification
BS ISO 10685-2Data specification
CH/172/3
BS ISO 10810Surface chemical analysis. X-ray photoelectronspectroscopy. Guidelines for analysis
CII/60
New Work Started continued...
32 Update Standards Dec 2008Prices may be subject to change.
BS ISO 21748Guidance for the use of repeatability,reproducibility and trueness estimates inmeasurement uncertainty estimation
will supersede DD ISO/TS 21748:2004
SS/6
BS ISO 21749Measurement uncertainty for metrologicalapplications. Repeated measurements andnested experiments
will supersede DD ISO/TS 21749:2005
SS/6
BS ISO 22390:—Timber structures. Laminated veneer lumber(LVL)
BS ISO 22390-1Structural properties
B/518
DD ISO/TS 22745:—Industrial automation systems and integration.Open technical dictionaries and theirapplication to master data
DD ISO/TS 22745-11Guidelines for the formulation of terminology
AMT/4
DD ISO/TS 22745-13Identification of concepts and terminology
AMT/4
PD ISO/TR 22849Design recommendations for bevel gears
MCE/5/-/13
BS ISO 22857 (Revision)Health informatics. Guidelines on dataprotection to facilitate trans-border flows ofpersonal health information
will supersede BS ISO 22857:2004
IST/35
BS ISO 22867Forestry machinery. Vibration test code forportable hand-held machines with internalcombustion engine. Vibration at the handles
will supersede BS EN ISO 22867:2006
AGE/29
BS ISO 24917Space systems. General test requirements forlaunch vehicles
ACE/68/-/2
BS ISO 25902:—Titanium pipes and tubes. Non-destructivetesting
BS ISO 25902-2Ultrasonic examination for the detection oflongitudinal flaws
NFE/35
BS ISO 16063:—Methods for the calibration of vibration andshock transducers
BS ISO 16063-41Calibration of laser vibrometers
GME/21/2
DD ISO/TS 16457Earth’s ionosphere and plasmasphere. Model ofdistribution of density, temperature andeffective collision frequency of electrons
ACE/68/-/4
BS ISO 16895:—Wood-based panels. Dry process fibreboard
BS ISO 16895-2Requirements
B/541
BS ISO 16992 (Revision)Passenger car tyres. Spare unit substitutiveequipment (SUSE)
will supersede BS ISO 16992:2006
AUE/4
BS ISO 18280Plastics. Epoxy resins. Test methods
PRI/42
BS ISO 19142Geographic information. Web feature service
IST/36
BS ISO 19143Geographic information. Filter encoding
IST/36
PD ISO/IEC TR 20000:—Information technology. Service management
PD ISO/IEC TR 20000-4Process Reference Model
IST/15/-/8
PD ISO/IEC TR 20000-5Exemplar of an ISO/IEC 20000 IncrementalImplementation Plan
IST/15/-/8
BS ISO 20152:—Timber structures. Bond performance ofadhesives
BS ISO 20152-1Basic requirements
B/518
BS ISO 21581Timber structures. Static and cyclic lateral loadtesting of shear walls
B/518
BS ISO 14660:—Geometrical Product Specifications (GPS).Geometrical features
BS ISO 14660-3Extracted centre of a sphere
TDW/4
BS ISO 14708:—Implants for surgery. Active implantable medicaldevices
BS ISO 14708-5Circulatory support devices
CH/150/6
BS ISO 14708-6Particular requirements for active implantablemedical devices intended to treattachyarrhythmia (including implantabledefibrillators)
CH/150/6
BS ISO 15063Plastics. Polyols for use in the production ofpolyurethanes. Determination of hydroxylnumber by NIR spectroscopy
PRI/42
BS ISO 15254Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision
will supersede BS EN ISO 15254:2002
CH/172/6
DD ISO/TS 15869Gaseous hydrogen and hydrogen blends. Landvehicle fuel tanks
PVE/3/8
BS ISO 16014:—Plastics. Determination of average molecularmass and molecular mass distribution ofpolymers using size-exclusion chromatography
BS ISO 16014-1 (Revision)General principles
will supersede BS ISO 16014-1:2003
PRI/21
BS ISO 16014-2 (Revision)Universal calibration method
will supersede BS ISO 16014-2:2003
PRI/21
BS ISO 16014-3 (Revision)Low-temperature method
will supersede BS ISO 16014-3:2003
PRI/21
BS ISO 16014-4 (Revision)High-temperature method
will supersede BS ISO 16014-4:2003
PRI/21
BS ISO 16014-5Light-scattering method
PRI/21
Update Standards Dec 2008 Prices may be subject to change. 33
DD IEC/PAS 61169-35Sectional specification. Radio frequency coaxialconnectors of type 2, 92
EPL/46/2
DD IEC/PAS 61169-41Sectional specification. Radio frequency coaxialconnectors of type CQA
EPL/46/2
DD IEC/PAS 61169-42Sectional specification. Radio frequency coaxialconnectors of type CQN
EPL/46/2
DD IEC/PAS 62596Electrotechnical products. Guideline forsampling procedure for determination ofrestricted substances in electrotechnicalproducts
GEL/111
BS IEC 62598Nuclear instrumentation. Constructionalrequirements and classification of radiometricgauges
NCE/2
PD 6705-3Recommendations for the execution ofaluminium structures to BS EN 1090-3
B/525/9
PAS 100 (Revision)Specification for composted materials
will supersede PAS 100:2005
NA to BS EN 1995:—UK National Annex to Eurocode 5. Design oftimber structures
NA to BS EN 1995-1-1:2004/Amendment 1General. Common rules and rules for buildings
B/525/5
BS ISO 28803Ergonomics of the physical environment.Application of international standards topeople with special requirements
PH/9
BS ISO 29002:—Industrial automation systems and integration.Exchange of characteristic data
BS ISO 29002-5Identification scheme
AMT/4
BS ISO/IEC 29128Information technology. Security techniques.Verification of cryptographic protocols
IST/33
BS ISO/IEC 29146Information technology. Security techniques. A framework for access management
IST/33
PD ISO/IEC TR 29149Information technology. Security techniques.Best practices for time stamping services
IST/33
BS ISO/IEC 29150Information technology. Security techniques.Signcryption
IST/33
BS ISO 29262Production equipment for microsystems.Interface between grippers and handlingsystem
MTE/1
DD ISO/TS 29584Glass in building. Technical specification.Pendulum impact testing and classification ofsafety glass for use in buildings
B/520
DD IEC/TS 60318:—Electroacoustics. Simulators of human head andear
DD IEC/TS 60318-7Head and torso simulator for acousticmeasurements of air-conduction hearing aids
EPL/29
DD IEC/PAS 61169:—Radio-frequency connectors
DD IEC/PAS 61169-18Sectional specification. Radio frequency coaxialconnectors of type SSMA
EPL/46/2
DD IEC/PAS 61169-19Sectional specification. Radio frequency coaxialconnectors of type SSMB
EPL/46/2
BS ISO 26367:—Guidelines for assessing the adverseenvironmental impact of fire effluents
BS ISO 26367-1Fundamentals
FSH/16
BS ISO/IEC 27001 (Revision)Information technology. Security techniques.Information security management systems.Requirements
will supersede BS ISO/IEC 27001:2005
IST/33
BS ISO/IEC 27033:—Information technology. Security techniques. IT network security
BS ISO/IEC 27033-3Reference networking scenarios. Risks, designtechniques and control issues
IST/33
BS ISO/IEC 27033-4Securing communications between networksusing security gateways. Risks, designtechniques and control issues
IST/33
BS ISO/IEC 27033-5Securing remote access. Risks, design techniquesand control issues
IST/33
BS ISO/IEC 27033-6Securing communications across networks usingVirtual Private Networks (VPNs). Risks, designtechniques and control issues
IST/33
BS ISO 27468Nuclear fuel technology. Criticality evaluationmethodology for PWR burn up credit (BUC)
NCE/9
BS ISO 27730Information and documentation. Internationalstandard collection identifier (ISCI)
IDT/2/18
BS ISO 27769:—Wood-based panels. Wet process fibreboard
BS ISO 27769-2Specifications
B/541
BS ISO 27875Space systems. Re-entry risk management forunmanned spacecraft and launch vehicle orbitalstages
ACE/68
BS ISO 28802Ergonomics of the physical environment. Theassessment of environments by means of anenvironmental survey involving physicalmeasurements of the environment andsubjective responses of people
PH/9
New Work Started continued...
34 Update Standards Dec 2008Prices may be subject to change.
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
08/30087642 DCBS ISO 10140-1 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 1. Test codes
EH/1/6
08/30087646 DCBS ISO 10140-2 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 2. Measurement of airbornesound insulation
EH/1/6
08/30087650 DCBS ISO 10140-3 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 3. Measurement of impact soundinsulation
EH/1/6
08/30087655 DCBS ISO 10140-4 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 4. Measurement procedures andrequirements
EH/1/6
08/30087659 DCBS ISO 10140-5 Acoustics. Laboratorymeasurement of sound insulation of buildingelements. Part 5. Requirements for test facilitiesand equipment
EH/1/6
08/30099651 DCBS ISO 16900-1 Respiratory protective devices.Methods of test and test equipment. Part 1.Determination of inward leakage
PH/4
08/30099655 DCBS ISO 16900-3 Respiratory protective devices.Methods of test and test equipment. Part 3.Determination of particle filter penetration
PH/4
08/30099658 DCBS ISO 16900-4 Respiratory protective devices.Methods of test and test equipment. Part 4.Determination of gas filter capacity
PH/4
08/30128080 DCBS ISO/IEC 19770-2 Software assetmanagement. Part 2. Software identificationtag£18.00 members, £36.00 non-members
IST/15
Comments for the above document are required by28 February, 2009
08/30144212 DCBS ISO 4986 Steel and iron casting. Magneticparticle inspection
ISE/6
08/30144215 DCBS ISO 4987 Steel and iron castings. Liquidpenetrant inspection
ISE/6
08/30164455 DCBS 8468-3-1 Respiratory protective devices foruse against chemical, biological, radiologicaland nuclear (CBRN) agents. Part 3-1. Self-contained open-circuit compressed airbreathing apparatus incorporating a hood forescape. Specification
PH/4
08/30180387 DCBS 8878 Guide to good practice incommissioning accessible websites
IST/45
08/30180523 DCBS 8517 The use of general purpose securitydogs. Code of practice
GW/3/-/15
08/30182996 DCBS 8887-2 Design for manufacturing, assembly,disassembly and end-of-life processing. Part 2.Vocabulary
TDW/4
08/30193234 DCBS 8484 Code of practice for the provision oflone worker services
GW/3
DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS
All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)
Most drafts are charged at£10.00 to members and£20.00 to non-members.
Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.
Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 31 January, 2009 unlessotherwise stated, to be considered by therelevant BSI committee.
Draft standards may be modified beforeadoption and issue as British Standards.
08/30017005 DCBS EN ISO 10848-4 Acoustics. Laboratorymeasurement of the flanking transmission ofairborne and impact noise between adjoiningrooms. Part 4. All other cases
EH/1/6
Comments for the above document are required by28 February, 2009
08/30084137 DCBS ISO 22538-6 Space systems. Oxygen safety.Part 6. Facility planning and implementation
ACE/68
DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS
You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.
Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.
Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is31 January, 2009 unless otherwisestated.
Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).
08/30113948 DCBS 2482 Specification for timber scaffoldboards
B/514/42
08/30142156 DCBS 5834-1 Surface boxes, guards andunderground chambers for utilities purposes.Part 1. Specification for guards and plinths
B/504
08/30142158 DCBS 5834-2 Surface boxes, guards andunderground chambers for utilities purposes.Part 2. Specification for boxes
B/504
08/30142165 DCBS 5834-4 Surface boxes, guards andunderground chambers for utilities purposes.Part 4. Specification for utility chambers
B/504
08/30154716 DCBS 5268-6-2 AMD1 Structural use of timber.Part 6-2. Code of practice for timber framewalls. Buildings other than dwellings notexceeding four storeys
B/525
Update Standards Dec 2008 Prices may be subject to change. 35
08/30167126 DCBS EN ISO 14171 Welding consumables. Solidwire electrodes, tubular cored electrodes andelectrode/flux combinations for submerged arcwelding of non alloy and fine grain steels.Classification
WEE/39
08/30167362 DCBS ISO 10710 Water quality. Growth inhibitiontest with the marine and brackish watermacroalgae Ceramium tenuicorne
EH/3/5
08/30167904 DCBS ISO 4251-1 AMD1 Tyres (ply rating markedseries) and rims for agricultural tractors andmachines. Part 1. Tyre designation anddimensions, and approved rim contours
AUE/4
Comments for the above document are required by28 February, 2009
08/30167985 DCBS ISO 8664 AMD1 Tyres for agriculturaltractors and machines. Code-designated andservice-description marked radial drive-wheeltyres
AUE/4
Comments for the above document are required by28 February, 2009
08/30169640 DCBS ISO 17089-1 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas.Part 1. Meters for custody transfer andallocation measurement
CPI/30/5
Comments for the above document are required by28 February, 2009
08/30169888 DCBS EN ISO 6887-5 Microbiology of food andanimal feeding stuffs. Preparation of testsamples, initial suspension and decimal dilutionsfor microbiological examination. Part 5. Specificrules for the preparation of milk and milkproducts
AW/9
Comments for the above document are required by9 February, 2009
08/30169896 DCBS EN 61907 Guidance on communicationnetwork dependability engineering
DS/1
08/30170398 DCBS ISO 10932 Milk and milk products.Determination of the minimal inhibitoryconcentration (MIC) of antibiotics applicable tobifidobacteria and non-enterococcal lactic acidbacteria (LAB)
AW/5
Comments for the above document are required by28 February, 2009
08/30170415 DCBS ISO 5667-21 Water quality. Sampling. Part 21. Guidance on sampling of drinkingwater distributed by tankers or means otherthan distribution pipes
EH/3/6
08/30165412 DCBS ISO 5610-8 Tool holders with rectangularshank for indexable inserts. Part 8. Style K
MTE/18
08/30165416 DCBS ISO 5610-9 Tool holders with rectangularshank for indexable inserts. Part 9. Style L
MTE/18
08/30165420 DCBS ISO 5610-10 Tool holders with rectangularshank for indexable inserts. Part 10. Style N
MTE/18
08/30165424 DCBS ISO 5610-11 Tool holders with rectangularshank for indexable inserts. Part 11. Style R
MTE/18
08/30165427 DCBS ISO 5610-12 Tool holders with rectangularshank for indexable inserts. Part 12. Style S
MTE/18
08/30165431 DCBS ISO 5610-13 Tool holders with rectangularshank for indexable inserts. Part 13. Style T
MTE/18
08/30165435 DCBS ISO 5610-14 Tool holders with rectangularshank for indexable inserts. Part 14. Style H
MTE/18
08/30165441 DCBS ISO 5610-15 Tool holders with rectangularshank for indexable inserts. Part 15. Style V
MTE/18
08/30166507 DCBS ISO 10580 Resilient, textile and laminatefloor coverings. Test method for emissions ofvolatile organic compounds (VOC)
PRI/3
08/30166847 DCBS ISO 21254-1 Lasers and laser-relatedequipment. Test methods for laser radiation-induced damage threshold. Part 1. Definitionsand general principles
CPW/172/9
08/30166853 DCBS ISO 21254-3 Lasers and laser-relatedequipment. Test methods for laser radiation-induced damage threshold. Part 3. Assurance oflaser power (energy) handling capabilities
CPW/172/9
08/30167121 DCBS EN ISO 14174 Welding consumables. Fluxesfor submerged arc welding and electroslagwelding. Classification
WEE/39
08/30147086 DCBS ISO 690 Information and documentation.Guidelines for bibliographic references andcitations to information resources
IDT/2/2
08/30153135 DCBS ISO 28218 Radiation protection.Performance criteria for radiobioassay
NCE/2
Comments for the above document are required by28 February, 2009
08/30159962 DCBS EN 384 Structural timber. Determination ofcharacteristic values of mechanical propertiesand density
B/518
08/30161152 DCBS EN 13634 Protective footwear formotorcycle riders. Requirements and testmethods
PH/1
08/30164483 DCBS ISO 28540 Water quality. Determination of16 polycyclic aromatic hydrocarbons (PAH) inwater. Method using gas chromatography withmass spectrometric detection (GC-MS)
EH/3/2
08/30165376 DCBS ISO 5610-1 Tool holders with rectangularshank for indexable inserts. Part 1. Generalsurvey, correlation and determination ofdimensions
MTE/18
08/30165388 DCBS ISO 5610-2 Tool holders with rectangularshank for indexable inserts. Part 2. Style A
MTE/18
08/30165392 DCBS ISO 5610-3 Tool holders with rectangularshank for indexable inserts. Part 3. Style B
MTE/18
08/30165395 DCBS ISO 5610-4 Tool holders with rectangularshank for indexable inserts. Part 4. Style D
MTE/18
08/30165399 DCBS ISO 5610-5 Tool holders with rectangularshank for indexable inserts. Part 5. Style F
MTE/18
08/30165402 DCBS ISO 5610-6 Tool holders with rectangularshank for indexable inserts. Part 6. Style G
MTE/18
08/30165406 DCBS ISO 5610-7 Tool holders with rectangularshank for indexable inserts. Part 7. Style J
MTE/18
Draft British Standards for Public Comment continued...
36 Update Standards Dec 2008Prices may be subject to change.
08/30185788 DCBS EN 15864 Characterisation of waste.Leaching behaviour test for basiccharacterization. Dynamic monolithic leachingtest with continuous leachant renewal underconditions relevant for specified scenario(s)
B/508/3
Comments for the above document are required by31 December, 2008
08/30186451 DCBS EN 573-3 Aluminium and aluminium alloys.Chemical composition and form of wroughtproducts. Part 3. Chemical composition andform of products
NFE/35/5
08/30186605 DCBS EN 13381-2 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 2. Vertical protectivemembranes
FSH/22
08/30186609 DCBS EN 13381-3 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 3. Applied protectionto concrete members
FSH/22
08/30186613 DCBS EN 13381-5 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 5. Applied protectionto concrete/profiled sheet steel compositemembers
FSH/22
08/30186617 DCBS EN 13381-6 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 6. Applied protectionto concrete filled hollow steel columns
FSH/22
08/30186620 DCBS EN 13381-7 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 7. Applied protectionto timber members
FSH/22
08/30186890 DCBS EN 12490 Durability of wood and wood-based products. Preservative-treated solidwood. Determination of the penetration andretention of creosote in treated wood
B/515
08/30186893 DCBS EN 1014-1 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 1. Procedure for sampling creosote
B/515
08/30186896 DCBS EN 1014-2 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 2. Procedure for obtaining asample of creosote from creosoted timber forsubsequent analysis
B/515
08/30179725 DCBS EN 1889-2 AMD1 Machines forunderground mines. Mobile machines workingunderground. Safety. Part 2. Rail locomotives
MRE/1
Comments for the above document are required by31 December, 2008
08/30179728 DCBS EN 12321 AMD1 Underground miningmachinery. Specification for the safetyrequirements of armoured face conveyors
MRE/1
Comments for the above document are required by31 December, 2008
08/30179770 DCBS EN 12545 AMD1 Footwear, leather andimitation leather goods manufacturingmachines. Noise test code. Commonrequirements
MCE/3/12
08/30180269 DCBS EN 934-2 Admixtures for concrete, mortarand grout. Part 2. Concrete admixtures.Definitions, requirements, conformity, markingand labelling
B/517/3
08/30180275 DCBS EN 934-4 Admixtures for concrete, mortarand grout. Part 4. Admixtures for grout forprestressing tendons. Definitions, requirements,conformity, marking and labelling
B/517/3
08/30182118 DCBS EN 50397-3 Covered conductors foroverhead lines and the related accessories forrated voltages above 1 kV A.C. and notexceeding 36 kV A.C. Part 3. Guide to use
GEL/20/16
08/30182125 DCBS ISO 10679 Steel. Cast tool steel
ISE/6
08/30183528 DCBS EN 50518-2 Monitoring and alarm receivingcentre. Part 2. Requirements for technicalfacilities
GW/1/11
08/30185782 DCBS EN 15862 Characterization of waste.Compliance leaching test. One stage batchleaching test for monoliths at a fixed liquid tosurface area ratio (L/A) for test portions withfixed minimum dimensions
B/508/3
Comments for the above document are required by31 December, 2008
08/30185785 DCBS EN 15863 Characterisation of waste.Leaching behaviour test for basiccharacterisation. Dynamic monolithic leachingtest with periodic leachant renewal, under fixedtest conditions
B/508/3
Comments for the above document are required by31 December, 2008
08/30170610 DCBS EN ISO 12543-5 Glass in building.Laminated glass and laminated safety glass. Part5. Dimensions and edge finishing
B/520/1
08/30172385 DCBS ISO 11452-11 Road vehicles. Componenttest methods for electrical disturbances fromnarrowband radiated electromagnetic energy.Part 11. Radiated immunity test method using areveberation chamber
AUE/16
08/30172620 DCBS EN ISO 8536-6 Infusion equipment formedical use. Part 6. Freeze drying closures forinfusion bottles
CH/212
08/30172647 DCBS ISO 8729-2 Ships and marine technology.Marine radar reflectors. Part 2. Active type
EPL/80
08/30173839 DCBS ISO 3548-2 Plain bearings. Thin walled halfbearings with or without flange. Part 2.Measurement of wall-thickness and flangethickness
MCE/12
Comments for the above document are required by28 February, 2009
08/30174756 DCBS EN 13128 AMD2 Safety of machine tools.Milling machines (including boring machines)
MTE/1
08/30175103 DCBS ISO 27108 Water quality. Determination ofselected plant treatment agents and biocideproducts. Method using solid-phasemicroextraction (SPME) followed by gaschromatography-mass spectrometry (GC-MS)
EH/3/2
08/30177295 DCBS ISO 14341 Welding consumables. Wireelectrodes and deposits for gas shielded metalarc welding of non alloy and fine grain steels.Classification
WEE/39
08/30178269 DCBS EN 1827 AMD1 Respiratory protectivedevices. Half masks without inhalation valvesand with separable filters to protect againstgases or gases and particles or particles only.Requirements, testing, marking
PH/4
Comments for the above document are required by28 February, 2009
08/30178500 DCBS EN 61169-40 Radio-frequency connectors.Part 40. Sectional specification for 2.4 series R.Fconnectors
EPL/46/2
Comments for the above document are required by28 February, 2009
Update Standards Dec 2008 Prices may be subject to change. 37
08/30188793 DCBS EN 50525-2-31 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-31. Cables forgeneral applications. Single core non-sheathedcables with thermoplastic PVC insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188796 DCBS EN 50525-2-41 Low voltage energy cablesof rated voltages up to and including 450/750 V.Part 2-41. Cables for general applications. Singlecore cables with crosslinked silicone rubberinsulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188799 DCBS EN 50525-2-42 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-42. Cables forgeneral applications. Single core non-sheathedcables with crosslinked EVA insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188804 DCBS EN 50525-2-51 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-51. Cables forgeneral applications. Oil resistant control cableswith thermoplastic PVC insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188810 DCBS EN 50525-2-71 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-71. Cables forgeneral applications. Flat tinsel cables (cords)with thermoplastic PVC insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188813 DCBS EN 50525-2-72 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-72. Cables forgeneral applications. Flat divisible cables (cords)with thermoplastic PVC insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188818 DCBS EN 50525-2-81 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-81. Cables forgeneral applications. Cables with crosslinkedelastomeric covering for arc welding
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188437 DCBS EN 13766 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for thetransfer of liquid petroleum gas and liquefiednatural gas. Specification
PRI/66
08/30188440 DCBS EN 1911 Stationary source emissions.Determination of mass concentration ofgaseous chlorides expressed as HCl. Standardreference method
EH/2/1
08/30188443 DCBS EN 15876-1 Electronic fee collection.Conformity evaluation of on board unit androadside equipment to EN 15509. Part 1. Testsuite structure and test purposes£18.00 members, £36.00 non-members
EPL/278
Comments for the above document are required by28 February, 2009
08/30188764 DCBS EN 50525-1 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 1. Generalrequirements
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188771 DCBS EN 50525-2-11 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-11. Cables forgeneral applications. Flexible cables withthermoplastic PVC insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188779 DCBS EN 50525-2-12 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-12. Cables forgeneral applications. Extensible leads withthermoplastic PVC insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188783 DCBS EN 50525-2-21 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-21. Cables forgeneral applications. Flexible cables withcrosslinked elastomeric insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188788 DCBS EN 50525-2-22 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-22. Cables forgeneral applications. High flexibility braidedcables with crosslinked elastomeric insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30186900 DCBS EN 1014-3 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 3. Determination of thebenzo[a]pyrene content of creosote
B/515
08/30186903 DCBS EN 1014-4 Wood preservatives. Creosoteand creosoted timber. Methods of sampling andanalysis. Part 4. Determination of the water-extractable phenols content of creosote
B/515
08/30187190 DCBS EN 13888 Grouts for tiles. Definitions andspecifications
B/539
08/30187193 DCBS EN 15871 Ventilation for buildings. Fireresisting duct sections
RHE/2
08/30187196 DCBS EN 1533 Wood and parquet flooring.Determination of bending strength under staticload. Test methods
B/543
08/30187552 DCBS EN 13306 Maintenance. Maintenanceterminology
DS/1
08/30187719 DCBS EN 1493 Vehicle lifts
MHE/12
08/30187745 DCBS EN 12566-6 Small wastewater treatmentsystems for up to 50 PT. Part 6. Prefabricatedtreatment units for septic tank effluent
B/505
08/30187751 DCBS EN 1457-1 Chimneys. Clay/ceramic flueliners. Part 1. Flue liners operating under dryconditions. Requirements and test methods
B/506/3
08/30187754 DCBS EN 1457-2 Chimneys. Clay ceramic flueliners. Part 2. Flue liners operating under wetconditions. Requirements and test methods
B/506/3
08/30188125 DCBS EN 15269-3 Extended application of testresults for fire resistance and/or smoke controlfor door, shutter and openable windowassemblies, including their elements of buildinghardware. Part 3. Timber hinged and pivoteddoorsets
FSH/22
08/30188146 DCBS EN 10169 Continuously organic coated (coilcoated) steel flat products. Technical deliveryconditions
ISE/10
Draft British Standards for Public Comment continued...
38 Update Standards Dec 2008Prices may be subject to change.
08/30190898 DCBS EN 60745-2-14 AMD Hand-held motor-operated electric tools. Safety. Part 2-14.Particular requirements for planers
CPL/61/6
08/30190901 DCBS EN 60745-2-18 AMD Hand-held motoroperated electric tools. Safety. Part 2-18.Particular requirements for strapping tools
CPL/61/6
08/30190906 DCBS EN 60745-2-20 AMD Hand-held motoroperated electric tools. Safety. Part 2-20.Particular requirements for band saws
CPL/61/6
08/30190909 DCBS EN 60745-2-21 AMD Hand-held motoroperated electric tools. Safety. Part 2-21.Particular requirements for drain cleaners
CPL/61/6
08/30190912 DCBS EN 60745-2-3 AMD Hand-held motoroperated electric tools. Safety. Part 2-3.Particular requirements for grinders, polishersand disk-type sanders
CPL/61/6
08/30190915 DCBS EN 60745-2-4 AMD Hand-held motoroperated electric tools. Safety. Part 2-4.Particular requirements for sanders andpolishers other than disk type
CPL/61/6
08/30190962 DCBS ISO 3213 Polypropylene (PP) pipes. Effect oftime and temperature on expected strength
PRI/88/4
08/30190974 DCBS ISO 26428-9 Digital cinema (D-cinema)distribution master. Part 9. Image pixel structurelevel 3. Serial digital interface signal formatting
CPW/36
Comments for the above document are required by28 February, 2009
08/30190977 DCBS ISO 26429-8 Digital cinema (D-cinema)packaging. Part 8. Packing list
CPW/36
Comments for the above document are required by28 February, 2009
08/30190980 DCBS ISO 26429-9 Digital cinema (D-cinema)packaging. Part 9. Asset mapping and filesegmentation
CPW/36
Comments for the above document are required by28 February, 2009
08/30190989 DCBS ISO 26430-5 Digital cinema (D-cinema)operations. Part 5. Packaging. Security log eventclass and constraints
CPW/36
Comments for the above document are required by28 February, 2009
08/30189949 DCBS EN 61558-2-20 Safety of transformers,reactors, power supply units and similarproducts for supply voltages up to 1100 V. Part 2-20. Particular requirements and tests forsmall reactors
PEL/96
Comments for the above document are required by20 February, 2009
08/30190494 DCBS ISO 5351 Pulps. Determination of limitingviscosity number in cupri-ethylenediamine (CED)solution
PAI/11
08/30190636 DCBS ISO 10961 Gas cylinders. Cylinder bundles.Design, manufacture, identification and testing
PVE/3/7
Comments for the above document are required by9 January, 2009
08/30190661 DCBS ISO 7752-3 Cranes. Controls. Layout andcharacteristics. Part 3. Tower cranes
MHE/3/5
Comments for the above document are required by28 February, 2009
08/30190664 DCBS ISO 7752-1 Cranes. Controls. Layout andcharacteristics. Part 1. General principles
MHE/3/5
Comments for the above document are required by28 February, 2009
08/30190670 DCBS ISO 29681 Pulps. Determination of pH ofsalted water extracts
PAI/11
08/30190684 DCBS ISO 18436-5 Condition monitoring anddiagnostics of machines. Requirements forqualification and assessment of personnel. Part 5. Lubricant laboratory technician/analyst
GME/21/7
Comments for the above document are required by23 January, 2009
08/30190852 DCBS EN 61000-4-21 Electromagneticcompatibility (EMC). Part 4-21. Testing andmeasurement techniques. Reverberationchamber test methods£18.00 members, £36.00 non-members
GEL/210/12
08/30190887 DCBS EN 60745-2-8 AMD Hand-held motoroperated electric tools. Safety. Part 2-8.Particular requirements for shears and nibblers
CPL/61/6
08/30190894 DCBS EN 60745-2-9 AMD Hand-held motoroperated electric tools. Safety. Part 2-9.Particular requirements for tappers
CPL/61/6
08/30188821 DCBS EN 50525-2-82 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-82. Cables forgeneral applications. Cables with crosslinkedelastomeric insulation for decorative chains
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188826 DCBS EN 50525-2-83 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 2-83. Cables forgeneral applications. Multicore cables withcrosslinked silicone rubber insulation
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188833 DCBS EN 50525-3-11 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-11. Cables withspecial fire performance. Flexible cables withhalogen-free thermoplastic insulation, and lowemission of smoke
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188836 DCBS EN 50525-3-21 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-21. Cables withspecial fire performance. Flexible cables withhalogen-free crosslinked insulation, and lowemission of smoke
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188839 DCBS EN 50525-3-31 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-31. Cables withspecial fire performance. Single core non-sheathed cables with halogen-freethermoplastic insulation, and low emission ofsmoke
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30188842 DCBS EN 50525-3-41 Electric cables. Low voltageenergy cables of rated voltages up to andincluding 450/750 V. Part 3-41. Cables withspecial fire performance. Single core non-sheathed cables with halogen-free crosslinkedinsulation, and low emission of smoke
GEL/20/17
Comments for the above document are required by28 February, 2009
08/30189945 DCBS EN 61558-2-12 Safety of transformers,reactors, power supply units and similarproducts for supply voltages up to 1100 V. Part 2-12. Particular requirements and tests forconstant voltage transformers and powersupply units incorporating constant voltagestransformers
PEL/96
Comments for the above document are required by20 February, 2009
Update Standards Dec 2008 Prices may be subject to change. 39
08/30191883 DCBS EN 60401-2 Terms and nomenclature forcores made of magnetically soft ferrite. Part 2.Reference of dimensions
EPL/51
08/30191891 DCBS EN 61936-1 Power installations exceeding 1kV A.C. Part 1. Common rules
PEL/99
08/30191902 DCBS EN 61204-7 AMD1 Low voltage powersupplies, D.C. output. Part 7. Safetyrequirements
PEL/22
08/30191907 DCBS EN 13623 Chemical disinfectants andantiseptics. Quantitative suspension test for theevaluation of bactericidal activity againstLegionella pneumophila of chemicaldisinfectants for aqueous systems. Test methodand requirements (phase 2, step 1)
CH/216
08/30192094 DCBS EN 3911 Aerospace series. Six lobe recess.Geometrical definition
ACE/12
08/30192115 DCBS EN 4473 Aerospace series. Aluminiumpigmented coatings for fasteners. Technicalspecification
ACE/12
08/30192124 DCBS ISO/IEC 23000-4 AMD2 Informationtechnology. Multimedia application format(MPEG-A). Part 4. Musical slide show applicationformat
IST/37
08/30192173 DCBS EN 62542 Environmental standardizationfor electrical and electronic products andsystems. Standardization of environmentalaspects. Glossary of terms
GEL/111
Comments for the above document are required by19 December, 2008
08/30192184 DCBS ISO 15928-4 Houses. Description ofperformance. Part 4. Fire safety
B/500
08/30192220 DCBS EN 60335-1 AMD F1 Household and similarelectrical appliances. Safety. Part 1. Generalrequirements
CPL/61
08/30192250 DCBS EN 60335-1 AMD F2 Household and similarelectrical appliances. Safety. Part 1. Generalrequirements
CPL/61
08/30191324 DCBS EN 61029-2-1 AMD Safety of transportablemotor-operated electric tools. Part 2-1.Particular requirements for circular saw benches
CPL/61/6
08/30191327 DCBS EN 61029-2-8 AMD Safety of transportablemotor-operated electric tools. Part 2-8.Particular requirements for single spindlevertical moulders
CPL/61/6
08/30191341 DCBS EN 60670-24 AMD1 Boxes and enclosuresfor electrical accessories for household andsimilar fixed electrical installations. Part 24.Particular requirements for enclosures forhousing protective devices and other powerdissipating electrical equipment
PEL/23
08/30191365 DCBS EN 50388 Railway applications. Powersupply and rolling stock. Technical criteria forthe coordination between power supply(substation) and rolling stock to achieveinteroperability
GEL/9/3
08/30191444 DCBS ISO 18334 Pallets for materials handling.Quality of assembly of new, wooden, flatpallets
PKW/0/-/11
Comments for the above document are required by10 February, 2009
08/30191453 DCBS EN 50527-1 Assessment of human exposureat the workplace for persons bearing activeimplantable medical devices (AIMD) in electric,magnetic and electromagnetic fields withfrequencies from 0 Hz to 300 GHz. Part 1.General
GEL/106
08/30191626 DCBS ISO 27186 Active implantable medicaldevices. Four-pole connector system forimplantable cardiac rhythm managementdevices. Dimensional and test requirements
CH/150/6
08/30191664 DCBS EN 50522 Earthing of power installationsexceeding 1 kV A.C
PEL/99
08/30191694 DCBS EN ISO 23328-2 Breathing system filters foranaesthetic and respiratory use. Part 2. Non-filtration aspects
CH/121/5
Comments for the above document are required by28 December, 2008
08/30191879 DCBS EN 3838 Aerospace series. Requirementsand tests on user-applied markings on aircraftelectrical cables
ACE/6
Comments for the above document are required by16 January, 2009
08/30190998 DCBS ISO 26431-2 Digital cinema (D-cinema)quality. Part 2. Reference projector andenvironment
CPW/36
Comments for the above document are required by28 February, 2009
08/30191123 DCBS ISO 9362 Banking. Bankingtelecommunication messages. Bank identifiercodes
IST/12
Comments for the above document are required by28 February, 2009
08/30191166 DCBS EN 60079-25 Explosive atmospheres. Part 25. Intrinsically safe systems
GEL/31/13
08/30191192 DCBS EN 60079-20-1 Explosive atmospheres. Part 20-1. Material characteristics. Gas andvapour classification, test methods and data
GEL/31
08/30191241 DCBS EN 60444-6 Measurement of quartz crystalunit parameters. Part 6. Measurement of drivelevel dependence (DLD)
EPL/49
08/30191251 DCBS EN 62553 Methods of measurement fordigital network. Performance characteristics ofterrestrial digital multimedia transmissionnetwork
EPL/103
Comments for the above document are required by15 December, 2008
08/30191273 DCBS EN 61977 Fibre optic interconnectingdevices and passive components. Fibre opticfilters. Generic specification
GEL/86/2
Comments for the above document are required by15 December, 2008
08/30191281 DCBS EN 60320-2-4 AMD1 Appliance couplers for household and similar general purposes.Part 2-4. Appliance couplers dependent onappliance weight for engagement
PEL/23/3
08/30191289 DCBS EN 50304/60350 AMD Electric cookingranges, hobs, ovens and grills for householduse. Methods for measuring performance
CPL/59
08/30191292 DCBS EN 62077 Fibre optic interconnectingdevices and passive components. Fibre opticcirculators. Generic specification
GEL/86/2
Comments for the above document are required by15 December, 2008
Draft British Standards for Public Comment continued...
40 Update Standards Dec 2008Prices may be subject to change.
08/30192677 DCBS EN 6059-307 Aerospace series. Electricalcables, installation. Protection sleeves. Testmethods. Part 307. Ageing
ACE/6
Comments for the above document are required by2 February, 2009
08/30192697 DCBS ISO/IEC 9797-1 Information technology.Security techniques. Message authenticationcodes (MACs). Part 1. Mechanisms using a blockcipher
IST/33
Comments for the above document are required by28 February, 2009
08/30192767 DCBS EN 62301 Household electrical appliances.Management of standby power
CPL/59
Comments for the above document are required by28 February, 2009
08/30192771 DCBS EN 60704-2-2 Household and similarelectrical appliances. Test code for thedetermination of airborne acoustical noise. Part 2-2. Particular requirements for fan heaters
CPL/59
Comments for the above document are required by28 February, 2009
08/30192819 DCBS EN 50428 AMD2 Switches for householdand similar fixed electrical installations.Collateral standard. Switches and relatedaccessories for use in home and buildingelectronic systems (HBES)
PEL/23
Comments for the above document are required by28 February, 2009
08/30193565 DCBS EN 61784-5 Industrial communicationnetworks. Profiles. Part 5. Installation offieldbuses
AMT/7
Comments for the above document are required by31 December, 2008
DOCUMENTS NOT ISSUEDAS DPCs
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
EN 1463:—Road marking materials. Retroreflecting roadstuds
EN 1463-1Initial performance requirements
The above draft has been circulated for UAPvote. Copies are available on request from thecontact point (below).Contact: Committee Service CentreEmail: [email protected]
B/509/2
08/30192512 DCBS EN ISO 10079-1 Medical suction equipment.Part 1. Electrically powered suction equipment.Safety requirements
CH/121/1
Comments for the above document are required by28 December, 2008
08/30192541 DCBS EN ISO 10079-3 Medical suction equipment.Part 3. Suction equipment powered from avacuum or pressure source
CH/121/1
Comments for the above document are required by28 December, 2008
08/30192545 DCBS EN ISO 23747 Anaesthetic and respiratoryequipment. Peak expiratory flow meters for theassessment of pulmonary function inspontaneously breathing humans
CH/121/5
Comments for the above document are required by28 December, 2008
08/30192553 DCBS EN ISO 18777 Transportable liquid oxygensystems for medical use. Particular requirements
CH/121/5
Comments for the above document are required by28 December, 2008
08/30192648 DCBS EN 6049-007 Aerospace series. Electricalcables, installation. Protection sleeve in meta-aramid fibres. Part 007. Self-wrappingmechanical and electrical protective sleeve,flexible post installation operating temperaturefrom -55°C to 260°C. Product standard
ACE/6
Comments for the above document are required by2 February, 2009
08/30192660 DCBS EN 62541-7 OPC Unified ArchitectureSpecification. Part 7. Profiles
AMT/7
Comments for the above document are required by12 January, 2009
08/30192664 DCBS EN 62541-9 OPC Unified ArchitectureSpecification. Part 9. Alarms and Conditions£18.00 members, £36.00 non-members
AMT/7
Comments for the above document are required by12 January, 2009
08/30192668 DCBS EN 62541-10 OPC Unified ArchitectureSpecification. Part 10. Programs
AMT/7
Comments for the above document are required by12 January, 2009
08/30192674 DCBS EN 6059-100 Aerospace series. Electricalcables, installation. Protection sleeves. Testmethods. Part 100. General
ACE/6
Comments for the above document are required by2 February, 2009
08/30192264 DCBS EN 60335-1 AMD F3 Household and similarelectrical appliances. Safety. Part 1. Generalrequirements
CPL/61
08/30192272 DCBS EN 60335-1 AMD F4 Household and similarelectrical appliances. Safety. Part 1. Generalrequirements
CPL/61
08/30192276 DCBS ISO 22009 Space systems. Spaceenvironment (natural and artificial). Model ofthe Earth’s magnetospheric magnetic field
ACE/68
Comments for the above document are required by10 February, 2009
08/30192282 DCBS EN 3155-002 Aerospace series. Electricalcontacts used in elements of connection. Part 002. List and utilization of contacts
ACE/6/-/3
08/30192288 DCBS EN ISO 179-1 Plastics. Determination ofCharpy impact properties. Part 1. Non-instrumented impact test
PRI/21
08/30192293 DCBS EN 60086-5 AMD1 Primary batteries. Part 5.Safety of batteries with aqueous electrolyte
CPL/35
Comments for the above document are required by2 January, 2009
08/30192301 DCBS EN 60384-26 Fixed capacitors for use inelectronic equipment. Part 26. Sectionalspecification. Aluminium electrolytic capacitorswith conductive polymer solid electrolyte
EPL/40X
Comments for the above document are required by31 December, 2008
08/30192480 DCBS EN ISO 17510-2 Sleep apnoea breathingtherapy. Part 2. Masks and application
CH/121/5
Comments for the above document are required by28 December, 2008
08/30192501 DCBS EN ISO 10079-2 Medical suction equipment.Part 2. Manually powered suction equipment
CH/121/5
Comments for the above document are required by28 December, 2008
08/30192505 DCBS EN ISO 17510-1 Sleep apnoea breathingtherapy. Part 1. Sleep apnoea breathing therapyequipment
CH/121/5
Comments for the above document are required by28 December, 2008
Update Standards Dec 2008 Prices may be subject to change. 41
CEN EUROPEANSTANDARDS
EUROPEAN RATIFIED TEXTS
The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.
EN 485:—Aluminium and aluminium alloys. Sheet, stripand plate
EN 485-2:2008Mechanical properties
NFE/35/5
EN 500:—Mobile road construction machinery. Safety
EN 500-2:—Specific requirements for road-milling machines
AMENDMENT 1:October 2008
to EN 500-2:2006B/513/1
EN 500-3:—Specific requirements for soil-stabilisingmachines and recycling machines
AMENDMENT 1:October 2008
to EN 500-3:2006B/513/1
EN 528:2008Rail dependent storage and retrievalequipment. Safety requirements
MHE/14
EN 539:—Clay roofing tiles for discontinuous laying.Determination of physical characteristics
EN 539-2:—Test for frost resistance
CORRIGENDUM 1:October 2008
to EN 539-2:2006B/542/3
EN 894:—Safety of machinery. Ergonomics requirementsfor the design of displays and control actuators
EN 894-1:1997+A1:2008General principles for human interactions withdisplays and control actuators
PH/9
prEN 696Ductile iron pipes, fittings, accessories and theirjoints for gas pipelines. Requirements and testmethods
This standard has been circulated under theCEN UAP procedure. A copy of the documentmay be obtained from the contact point(below) on request.Contact: Committee Service CentreEmail: [email protected]
PSE/10
prEN 1447Plastics piping systems. Glass-reinforcedthermosetting plastics (GRP) pipes.Determination of long-term resistance tointernal pressure
This standard has been circulated under theCEN UAP procedure. A copy of the documentmay be obtained from the contact point(below) on request.Contact: Committee Service CentreEmail: [email protected]
PRI/88/2
prEN ISO 5182Resistance welding. Materials for electrodes andancillary equipment
This standard has been circulated under theCEN UAP procedure to adopt ISO 5182:2008 asan identical European Standard. ISO 5182:2008has already been adopted as identicalBS ISO 5182:2008 in the UK.Contact: Committee Service CentreEmail: [email protected]
WEE/29
prEN ISO 17678Milk and milk products. Determination of milkfat purity by gas chromatographic analysis oftriglycerides (Reference method)
This document has been issued as a seconddraft for parallel enquiry in CEN and ISO. Copiesare available on request from the contact point(below) under document referenceAW/5_08_0060.Contact: Committee Service CentreEmail: [email protected]
AW/5
prEN ISO 24373Welding consumables. Solid wires and rods forfusion welding of copper and copper alloys.Classification
This document which will not be issued as aDraft for Public Comment is identical toISO 24373:2008 and has been circulated toCEN members for voting. Please sumbit anycomments to the Programme Manager (below)by 31 December, 2008.Contact: Anne HannanEmail: [email protected]
WEE/39
EN 1755:2000/Amendment 1Safety of industrial trucks. Operation inpotentially explosive atmospheres. Use inflammable gas, vapour, mist and dust
The above draft has been circulated for UAPvote. Copies are available on request from thecontact point (below).Contact: Committee Service CentreEmail: [email protected]
MHE/7
EN 13155:—Cranes. Safety
EN 13155-1:2003/Amendment 2Non-fixed load lifting attachments
This amendment addresses the revisedMachinery Directive 2006/42/EC by adding anew informative annex ZB. Annex ZA ismodified to include the Official Journal citationand presumption of conformity to the relevantEssential Requirements. The references havebeen updated and there are also minor changesto 7.2.1 minimum marking to require additionaldetails of the manufacturer and/or theauthorised representative, and to clarify themachinery designation and year ofmanufacture.Contact: Mike HodsonEmail: [email protected]
MHE/3
EN 15056:2006/Amendment 1Cranes. Requirements for container handlingspreaders
This amendment addresses the revisedMachinery Directive 2006/42/EC by adding anew informative annex ZB. A new clause 5.5.3covering electrical connection to the crane hasalso been added. The references have beenupdated and 7.1 Information for use has beenmodified in respect of the information on statictest load to be given in the machine manual,not the technical file. Table B.1, which identifiessuitable sets of standards, has also beenupdated.Contact: Mike HodsonEmail: [email protected]
MHE/3
EN ISO 20361Liquid pumps and pump units. Noise test code.Grades 2 and 3 of accuracy
It has been proposed that the above standardbe issued under the Unique AcceptanceProcedure. BS EN ISO 20361 will supersedeBS EN 12639:2000. Any comments on thisproposal should be received by the ProgrammeManager (below) by 15 February, 2009.
Please note that only editorial, as opposed totechnical, changes can be proposed to thedocument.Contact: Manjit MatharuEmail: [email protected]
MCE/6
Documents Not Issused as DPCs continued...
42 Update Standards Dec 2008Prices may be subject to change.
EN 13411-7:—Symmetric wedge socket
AMENDMENT 1:October 2008
to EN 13411-7:2006MHE/2
EN 13747:—Precast concrete products. Floor plates for floorsystems
AMENDMENT 1:October 2008
to EN 13747:2005B/524
EN 13757:—Communication systems for meters and remotereading of meters
EN 13757-5:2008Wireless relaying
PEL/894
EN 14267:—Irrigation techniques. Irrigation hydrants
CORRIGENDUM 1:October 2008
to EN 14267:2004AGE/30
EN 14459:—Control functions in electronic systems for gasburners and gas burning appliances. Methodsfor classification and assessment
CORRIGENDUM 1:October 2008
to EN 14459:2007GSE/22
EN 15181:2008Measuring method of the energy consumptionof gas fired ovens
GSE/35
EN 15258:2008Precast concrete products. Retaining wallelements
B/524
EN 15327:—Railway applications. Passenger alarmsubsystem
EN 15327-1:2008General requirements and passenger interfacefor the passenger emergency brake system
RAE/4
EN 15355:2008Railway applications. Braking. Distributor valvesand distributor-isolating devices
RAE/4
EN 15427:2008Railway applications. Wheel/rail frictionmanagement. Flange lubrication
RAE/3/-/6
EN 12385:—Steel wire ropes. Safety
EN 12385-1:2002+A1:2008General requirements
MHE/2
EN 13138:—Buoyant aids for swimming instruction
EN 13138-1:2008Safety requirements and test methods forbuoyant aids to be worn
SW/136
EN 13297:—Textile floor coverings. Classification of needledpile floor coverings
CORRIGENDUM 1:October 2008
to EN 13297:2007AGE/30
EN 13411:—Terminations for steel wire ropes. Safety
EN 13411-1:—Thimbles for steel wire rope slings
AMENDMENT 1:October 2008
to EN 13411-1:2002MHE/2
EN 13411-2:—Splicing of eyes for wire rope slings
AMENDMENT 1:October 2008
to EN 13411-2:2001MHE/2
EN 13411-3:—Ferrules and ferrule-securing
AMENDMENT 1:October 2008
to EN 13411-3:2004MHE/2
EN 13411-4:—Metal and resin socketing
AMENDMENT 1:October 2008
to EN 13411-4:2002MHE/2
EN 13411-5:—U-bolt wire rope grips
AMENDMENT 1:October 2008
to EN 13411-5:2003MHE/2
EN 13411-6:—Asymmetric wedge socket
AMENDMENT 1:October 2008
to EN 13411-6:2004MHE/2
EN 894-3:2000+A1:2008Control actuators
PH/9
EN 1005:—Safety of machinery. Human physicalperformance
EN 1005-1:2001+A1:2008Terms and definitions
PH/9/4
EN 1170:—Test method for glass-fibre reinforced cement
EN 1170-8:2008Cyclic weathering type test
B/524
EN 1264:—Water based surface embedded heating andcooling systems
EN 1264-2:2008Floor heating. Prove methods for thedetermination of the thermal output usingcalculation and test methods
RHE/6
EN 1264-5:2008Heating and cooling surfaces embedded infloors, ceilings and walls. Determination of thethermal output
RHE/6
EN 1434:—Heat meters
EN 1434-3:2008Data exchange and interfaces
PEL/894
EN 1634:—Fire resistance and smoke control tests for door,shutter and, openable window assemblies andelements of building hardware
EN 1634-1:2008Fire resistance tests for doors, shutters andopenable windows
FSH/24
EN 12002:2008Adhesives for tiles. Determination of transversedeformation for cementitious adhesives andgrouts
B/539
EN 12003:2008Adhesives for tiles. Determination of shearadhesion strength of reaction resin adhesives
B/539
EN 12336:2005+A1:2008Tunnelling machines. Shield machines, thrustboring machines, auger boring machines, liningerection equipment. Safety requirements
B/513
Update Standards Dec 2008 Prices may be subject to change. 43
EN 15564:2008Precast concrete products. Resin boundconcrete. Requirements and test methods
B/524
EN 15613:2008Knee and elbow protectors for indoor sports.Safety requirements and test methods
PH/3
EN 15620:2008Steel static storage systems. Adjustable palletracking. Tolerances, deformations andclearances
MHE/8
CEN REPORTS
CEN/TR 15775:2008Child use and care articles. National translationsof warnings and instructions for use in child useand care articles standards
CW/39
CEN TECHNICALSPECIFICATIONS
CEN/TS 99001:2008Business support. Support services provided tosmall enterprises. Terminology, quality andperformance
SVS/1/1
CENELEC PUBLICATIONS
EUROPEAN RATIFIED TEXTS
The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.
EN 50106:2008Safety of household and similar electricalappliances. Particular rules for routine testsreferring to appliances under the scope ofEN 60335-1
CPL/61
EN 50131:—Alarm systems. Intrusion systems
EN 50131-5-3:—Requirements for interconnections equipmentusing radio frequency techniques
AMENDMENT 1:October 2008
to EN 50131-5-3:2005GW/1/1
EN 60335-2-27:—(IEC 60335-2-27:2002/A1:2004)Particular requirements for appliances for skinexposure to ultraviolet and infrared radiation
AMENDMENT 1:October 2008
to EN 60335-2-27:2003CPL/61/01
EN 60335-2-27:—(IEC 60335-2-27:2002/A2:2007)Particular requirements for appliances for skinexposure to ultraviolet and infrared radiation
AMENDMENT 2:October 2008
to EN 60335-2-27:2003CPL/61/01
EN 60335-2-43:—(IEC 60335-2-43:2002/A2:2008)Particular requirements for clothes dryers andtowel rails
AMENDMENT 2:October 2008
to EN 60335-2-43:2003CPL/61/07
EN 60335-2-60:—(IEC 60335-2-60:2002/A2:2008)Particular requirements for whirlpool baths andwhirlpool spas
AMENDMENT 2:October 2008
to EN 60335-2-60:2003CPL/61/07
EN 60335-2-61:—(IEC 60335-2-61:2002/A2:2008)Particular requirements for thermal-storageroom heaters
AMENDMENT 2:October 2008
to EN 60335-2-61:2003CPL/61/07
EN 60335-2-75:—(IEC 60335-2-75:2002/A2:2008)Particular requirements for commercialdispensing appliances and vending machines
AMENDMENT 2:October 2008
to EN 60335-2-75:2004CPL/61/5
EN 60335-2-98:—(IEC 60335-2-98:2002/A2:2008)Particular requirements for humidifiers
AMENDMENT 2:October 2008
to EN 60335-2-98:2003CPL/61/07
EN 60404:—Magnetic materials
EN 60404-2:—(IEC 60404-2:1998/A1:2008)Methods of measurement of magneticproperties of electrical steel sheet and strip bymeans of an Epstein frame
AMENDMENT 1:CORRIGENDUM 1:October 2008
to EN 60404-2:1998ISE/NFE/5
EN 50465:2008Gas appliances. Fuel cell gas heating appliance.Fuel cell gas heating appliance of nominal heatinput inferior or equal to 70 kW
GEL/105
EN 55014:—Electromagnetic compatibility. Requirements forhousehold appliances, electric tools and similarapparatus
EN 55014-2:—(IEC CISPR 14-2:1997/A2:2008)Immunity. Product family standard
AMENDMENT 2:October 2008
to EN 55014-2:1997GEL/210/11
EN 60079:—Explosive atmospheres
EN 60079-14:2008(IEC 60079-14:2007)Electrical installations design, selection anderection
GEL/31/11
EN 60137:2008(IEC 60137:2008)Insulated bushings for alternating voltagesabove 1000 V
PEL/36
EN 60335:—Household and similar electrical appliances.Safety
EN 60335-2-5:—(IEC 60335-2-5:2002/A2:2008)Particular requirements for dishwashers
AMENDMENT 2:October 2008
to EN 60335-2-5:2003CPL/61/14
EN 60335-2-8:—(IEC 60335-2-8:2002/A2:2008)Particular requirements for shavers, hair clippersand similar appliances
AMENDMENT 2:October 2008
to EN 60335-2-8:2003CPL/61/01
EN 60335-2-14:—(IEC 60335-2-14:2006/A1:2008)Particular requirements for kitchen machines
AMENDMENT 1:October 2008
to EN 60335-2-14:2003CPL/61/01
EN 60335-2-15:—(IEC 60335-2-15:2002/A2:2008)Particular requirements for appliances forheating liquids
AMENDMENT 2:October 2008
to EN 60335-2-15:2005CPL/61/07
CEN European Standards continued...
44 Update Standards Dec 2008Prices may be subject to change.
EN 61858:2008(IEC 61858:2008)Electrical insulation systems. Thermal evaluationof modifications to an established wire-woundEIS
GEL/112
EN 62227:2008(IEC 62227:2008)Multimedia home server systems. Digital rightspermission code
EPL/100
EN 62288:2008(IEC 62288:2008)Maritime navigation and radiocommunicationequipment and systems. Presentation ofnavigation-related information on shipbornenavigational displays. General requirements,methods of testing and required test results
EPL/80
EN 62305:—Protection against lightning
EN 62305-3:—(IEC 62305-3:2006)Physical damage to structures and life hazard
CORRIGENDUM 1:September 2008
to EN 62305-3:2006GEL/81
EN 62317:—Ferrite cores. Dimensions
EN 62317-14:2008(IEC 62317-14:2008)EFD-cores for use in power supply applications
EPL/51
HARMONIZATIONDOCUMENTS
CENELEC HD 629:—Test requirements on accessories for use onpower cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42) kV
CENELEC HD 629.1 S2:—Cables with extruded insulation
AMENDMENT 1:September 2008
to CENELEC HD 629.1 S2:2006£38.00 members, £40.00 non-members
GEL/20/11
CENELEC HD 629.2 S2:—Cables with impregnated paper insulation
AMENDMENT 1:September 2008
to CENELEC HD 629.2 S2:2006£38.00 members, £40.00 non-members
GEL/20/11
EN 60851:—Winding wires. Test methods
EN 60851-5:2008(IEC 60851-5:2008)Electrical properties
GEL/55
EN 60966:—Radio frequency and coaxial cable assemblies
EN 60966-2-1:2008(IEC 60966-2-1:2003)Sectional specification for flexible coaxial cableassemblies
EPL/46/1
EN 60966-3:2008(IEC 60966-3:2003)Sectional specification for semi-flexible coaxialcable assemblies
EPL/46/1
EN 61000:—Electromagnetic compatibility (EMC)
EN 61000-3-3:2008(IEC 61000-3-3:2008)Limits. Limitation of voltage changes, voltagefluctuations and flicker in public low-voltagesupply systems, for equipment with ratedcurrent ≤ 16 A per phase and not subject toconditional connection
GEL/210/12
EN 61039:2008(IEC 61039:2008)Classification of insulating liquids
GEL/10
EN 61291:—Optical amplifiers
EN 61291-4:2008(IEC 61291-4:2008)Multichannel applications. Performancespecification template
GEL/86/3
EN 61291-6-1:2008(IEC 61291-6-1:2008)Interfaces. Command set
GEL/86/3
EN 61857:—Electrical insulation systems. Procedures forthermal evaluation
EN 61857-22:2008(IEC 61857-22:2008)Specific requirements for encapsulated-coilmodel. Wire-wound electrical insulation system(EIS)
GEL/112
EN 60512:—Connectors for electronic equipment. Tests andmeasurements
EN 60512-26-100:2008(IEC 60512-26-100:2008)Measurement setup, test and referencearrangements and measurements forconnectors according to IEC 60603-7. Tests 26ato 26g
EPL/48
EN 60598:—Luminaires
EN 60598-1:2008(IEC 60598-1:2008)General requirements and tests
CPL/34/4
EN 60669:—Switches for household and similar fixed-electrical installations
EN 60669-1:—(IEC 60669-1:1998/A2:2006)General requirements
AMENDMENT 2:October 2008
to EN 60669-1:1999PEL/23
EN 60695:—Fire hazard testing
EN 60695-1-30:2008(IEC 60695-1-30:2008)Guidance for assessing the fire hazard ofelectrotechnical products. Preselection testingprocess. General guidelines
GEL/89
EN 60794:—Optical fibre cables
EN 60794-2-41:2008(IEC 60794-2-41:2008)Indoor cables. Product specification for simplexand duplex buffered A4 fibres
GEL/86/1
EN 60810:—(IEC 60810:2003/A1:2008)Lamps for road vehicles. Performancerequirements
AMENDMENT 1:October 2008
to EN 60810:2003CPL/34/1
EN 60825:—Safety of laser products
EN 60825-4:—(IEC 60825-4:2006/A1:2008)Laser guards
AMENDMENT 1:October 2008
to EN 60825-4:2006EPL/76
CENELEC Publications continued...
46 Update Standards Dec 2008Prices may be subject to change.
IEC CISPR 15:—Limits and methods of measurement of radiodisturbance characteristics of electrical lightingand similar equipment
AMENDMENT 2:October 2008
to IEC CISPR 15:2005£14.40 members, £15.00 non-members
GEL/210/11
IEC CISPR 16:—Specification for radio disturbance andimmunity measuring apparatus and methods
IEC CISPR 16-2-1:2008(Edition 2)
Methods of measurement of disturbances andimmunity. Conducted disturbancemeasurements£156.48 members, £163.00 non-members
GEL/210/12
ISO PUBLICATIONS
It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.
The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)
ISO 445:2008(Edition 3)
Pallets for materials handling. Vocabulary£112.32 members, £117.00 non-members
PKW/0/-/11
Will be implemented as an identical British Standard
ISO 589:2008(Edition 4)
Hard coal. Determination of total moisture£45.12 members, £47.00 non-members
PTI/16
Will not be implemented as a British Standard
ISO 1750:—Pesticides and other agrochemicals. Commonnames
AMENDMENT 5:November 2008
to ISO 1750:1981£137.28 members, £143.00 non-members
AW/81
Will not be implemented as a British Standard
ISO 2320:2008(Edition 4)
Prevailing torque type steel nuts. Mechanicaland performance properties£65.28 members, £68.00 non-members
FME/9/1
Will be implemented as an identical British Standard
IEC 61000:—Electromagnetic compatibility (EMC)
IEC 61000-4:—Testing and measurement techniques
IEC 61000-4-6:2008(Edition 3)
Immunity to conducted disturbances, inducedby radio-frequency fields£137.28 members, £143.00 non-members
GEL/210/12
IEC 61000-4-30:2008(Edition 2)
Power quality measurement methods£98.00 members, £163.00 non-members
GEL/210/12
IEC 61606:—Audio and audiovisual equipment. Digital audioparts. Basic measurement methods of audiocharacteristics
IEC 61606-3:2008Professional use£120.00 members, £125.00 non-members
EPL/100
IEC 62059:—Electricity metering equipment (A.C.).Dependability
IEC 62059-31:2008Accelerated reliability testing. Elevatedtemperature and humidity£168.00 members, £175.00 non-members
PEL/13
IEC/TS 62239:2008(Edition 2)
Process management for avionics. Preparationof an electronic components management plan£78.72 members, £82.00 non-members
GEL/107
IEC 80601:—Medical electrical equipment
IEC 80601-2-58:2008Particular requirements for the basic safety andessential performance of lens removal devicesand vitrectomy devices for ophthalmic surgery£86.40 members, £90.00 non-members
CH/62/4
IEC 80601-2-59:2008Particular requirements for the basic safety andessential performance of screeningthermographs for human febrile temperaturescreening£96.00 members, £100.00 non-members
CH/62/4
IEC PUBLICATIONS
It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.
The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)
IEC 60034:—Rotating electrical machines
IEC 60034-30:2008Efficiency classes of single-speed three-phasecage induction motors£59.52 members, £62.00 non-members
PEL/2
IEC/TS 60815:—Selection and dimensioning of high-voltageinsulators intended for use in pollutedconditions
IEC/TS 60815-1:2008Definitions, information and general principles£137.28 members, £143.00 non-members
PEL/36
IEC/TS 60815-2:2008Ceramic and glass insulators for A.C. systems£72.00 members, £75.00 non-members
PEL/36
IEC/TS 60815-3:2008Polymer insulators for A.C. systems£65.28 members, £68.00 non-members
PEL/36
IEC 60853:—Calculation of cyclic and emergency currentrating of cables
IEC 60853-1:—Cyclic rating factor for cables up to andincluding 18/30 (36) kV
AMENDMENT 2:October 2008
to IEC 60853-1:1985£14.40 members, £15.00 non-members
GEL/20/16
IEC 60853-2:—Cyclic rating of cables greater than 18/30 (36)kV and emergency ratings for cables of allvoltages
AMENDMENT 1:October 2008
to IEC 60853-2:1989£35.52 members, £37.00 non-members
GEL/20/16
Update Standards Dec 2008 Prices may be subject to change. 47
ISO 7573:2008(Edition 2)
Technical product documentation. Parts lists£38.40 members, £40.00 non-members
TDW/4
Will be implemented as an identical British Standard
ISO 8362:—Injection containers and accessories
ISO 8362-2:2008(Edition 2)
Closures for injection vials£33.60 members, £35.00 non-members
CH/212
Will be implemented as an identical British Standard
ISO 8362-5:2008(Edition 2)
Freeze drying closures for injection vials£45.12 members, £47.00 non-members
CH/212
Will be implemented as an identical British Standard
ISO 8406:2008(Edition 3)
Tools for moulding. Mould bases. Roundlocating elements and spacers£28.80 members, £30.00 non-members
MTE/12
Will be implemented as an identical British Standard
ISO/IEC 9075:2008 (CD-ROM)Information technology. Database languages.SQL£242.88 members, £253.00 non-members
IST/40
This CD contains Parts 1-4, 9-11, 13 and 14 ofISO/IEC 9075.
Will be implemented as an identical British Standard
ISO 9697:2008(Edition 2)
Water quality. Measurement of gross betaactivity in non-saline water. Thick sourcemethod£49.92 members, £52.00 non-members
EH/3
Will be implemented as an identical British Standard
ISO 9895:2008(Edition 2)
Paper and board. Compressive strength. Short-span test£38.40 members, £40.00 non-members
PAI/11
Will be implemented as an identical British Standard
ISO 4666:—Rubber, vulcanized. Determination oftemperature rise and resistance to fatigue inflexometer testing
ISO 4666-2:2008(Edition 2)
Rotary flexometer£45.12 members, £47.00 non-members
PRI/22
Will be implemented as an identical British Standard
ISO 4706:2008Gas cylinders. Refillable welded steel cylinders.Test pressure 60 bar and below£91.20 members, £95.00 non-members
PVE/3/3
Will be implemented as an identical British Standard
ISO 5492:2008(Edition 2)
Sensory analysis. Vocabulary£137.28 members, £143.00 non-members
AW/12
Will be implemented as an identical British Standard
ISO 6292:2008(Edition 2)
Powered industrial trucks and tractors. Brakeperformance and component strength£49.92 members, £52.00 non-members
MHE/7
Will be implemented as an identical British Standard
ISO 7176:—Wheelchairs
ISO 7176-10:2008(Edition 2)
Determination of obstacle-climbing ability ofelectrically powered wheelchairs£33.60 members, £35.00 non-members
CH/173/1
Will not be implemented as a British Standard
ISO 7240:—Fire detection and alarm systems
ISO 7240-28:2008Fire protection control equipment£78.72 members, £82.00 non-members
FSH/12/4
Will not be implemented as a British Standard
ISO/IEC 7501:—Identification cards. Machine readable traveldocuments
ISO/IEC 7501-1:2008 (CD-ROM)(Edition 5)
Machine readable passport£25.92 members, £27.00 non-members
IST/17
Will be implemented as an identical British Standard
ISO 2470:—Paper, board and pulps Measurement of diffuseblue reflectance factor
ISO 2470-2:2008Outdoor daylight conditions (D65 brightness)£38.40 members, £40.00 non-members
PAI/11
Will be implemented as an identical British Standard
ISO 2575:—Road vehicles. Symbols for controls, indicatorsand tell-tales
AMENDMENT 3:October 2008
to ISO 2575:2004£11.52 members, £12.00 non-members
AUE/12
Will be implemented as an identical British Standard
ISO 2898:—Plastics. Plasticized poly (vinyl chloride)(PVC-P)moulding and extrusion materials
ISO 2898-2:2008(Edition 4)
Preparation of test specimens anddetermination of properties£33.60 members, £35.00 non-members
PRI/82
Will be implemented as an identical British Standard
ISO 3767:—Tractors, machinery for agriculture and forestry,powered lawn and garden equipment. Symbolsfor operator controls and other displays
ISO 3767-2:2008(Edition 3)
Symbols for agricultural tractors and machinery£70.08 members, £73.00 non-members
AGE/6
Will be implemented as an identical British Standard
ISO 4254:—Agricultural machinery. Safety
ISO 4254-7:2008(Edition 2)
Combine harvesters, forage harvesters andcotton harvesters£100.80 members, £105.00 non-members
AGE/32
Will not be implemented as a British Standard
ISO 4254-9:2008(Edition 2)
Seed drills£62.40 members, £65.00 non-members
AGE/32
Will be implemented as an identical British Standard
ISO 4373:2008(Edition 3)
Hydrometry. Water level measuring devices£65.28 members, £68.00 non-members
CPI/113/5
Will be implemented as an identical British Standard
ISO Publications continued...
48 Update Standards Dec 2008Prices may be subject to change.
ISO/TR 11955:2008Hybrid-electric road vehicles. Guidelines forcharge balance measurement£45.12 members, £47.00 non-members
PEL/69
Will be implemented as an identical British Standard
ISO 11961:2008(Edition 2)
Petroleum and natural gas industries. Steel drillpipe£137.28 members, £143.00 non-members
PSE/17/-/5
Will be implemented as an identical British Standard
ISO 12004:—Metallic materials. Sheet and strip.Determination of forming-limit curves
ISO 12004-1:2008Measurement and application of forming-limit.Diagrams in the press shop£57.60 members, £60.00 non-members
ISE/NFE/4/2
Will be implemented as an identical British Standard
ISO 12004-2:2008Determination of forming-limit curves inlaboratory£86.40 members, £90.00 non-members
ISE/NFE/4/2
Will be implemented as an identical British Standard
ISO 13041:—Test conditions for numerically controlledturning machines and turning centres
ISO 13041-2:2008Geometric tests for machines with a verticalworkholding spindle£91.20 members, £95.00 non-members
MTE/1
Will be implemented as an identical British Standard
ISO/TS 13434:2008Geosynthetics. Guidelines for the assessment ofdurability£94.08 members, £98.00 non-members
B/553
Will be implemented as an identical British Standard
ISO 13500:2008(Edition 3)
Petroleum and natural gas industries. Drillingfluid materials. Specifications and tests£129.60 members, £135.00 non-members
PSE/17/-/3
Will be implemented as an identical British Standard
ISO 11612:2008(Edition 2)
Protective clothing. Clothing to protect againstheat and flame£73.92 members, £77.00 non-members
PH/3/2
Will be implemented as an identical British Standard
ISO/IEC 11695:—Identification cards. Optical memory cards.Holographic recording method
ISO/IEC 11695-1:2008Physical characteristics£21.12 members, £22.00 non-members
IST/17
Will be implemented as an identical British Standard
ISO/IEC 11695-2:2008Dimensions and location of accessible opticalarea£14.40 members, £15.00 non-members
IST/17
Will be implemented as an identical British Standard
ISO/IEC 11695-3:2008Optical properties and characteristics£14.40 members, £15.00 non-members
IST/17
Will be implemented as an identical British Standard
ISO/IEC 11801:—Information technology. Generic cabling forcustomer premises
AMENDMENT 1:CORRIGENDUM 1:October 2008
to ISO/IEC 11801:2002TCT/7
Will not be implemented as a British Standard
ISO 11900:—Tools for pressing. Ball-lock punch retainers
ISO 11900-2:2008(Edition 2)
Types C and D, reduced for light duty£33.60 members, £35.00 non-members
MTE/12
Will be implemented as an identical British Standard
ISO 11903:2008(Edition 2)
Tools for pressing. Guide pillar mountings£28.80 members, £30.00 non-members
MTE/12
Will not be implemented as a British Standard
ISO/TR 11954:2008Fuel cell road vehicles. Maximum speedmeasurement£38.40 members, £40.00 non-members
PEL/69
Will not be implemented as a British Standard
ISO 10303:—Industrial automation systems and integration.Product data representation and exchange
ISO 10303-59:2008Integrated generic resource. Quality of productshape data£194.88 members, £203.00 non-members
AMT/4
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/TS 10303:—Industrial automation systems and integration.Product data representation and exchange
ISO/TS 10303-1052:2007 (CD-ROM)(Edition 2)
Application module. Default tolerance£83.52 members, £87.00 non-members
AMT/4
Will not be implemented as a British Standard
ISO 10407:—Petroleum and natural gas industries. Rotarydrilling equipment
ISO 10407-2:2008Inspection and classification of used drill stemelements£175.68 members, £183.00 non-members
PSE/17/-/4
Will be implemented as an identical British Standard
ISO/IEC 10646:— (CD-ROM)Information technology. Universal Multiple-Octet Coded Character Set (UCS)
AMENDMENT 4:July 2008
to ISO/IEC 10646:2003£112.32 members, £117.00 non-members
IST/5
Will not be implemented as a British Standard
ISO 10907:—Tools for moulding. Locating rings
ISO 10907-1:2008(Edition 2)
Locating rings for mounting without thermalinsulating sheets in small or medium moulds(types A and B)£38.40 members, £40.00 non-members
MTE/12
Will be implemented as an identical British Standard
ISO 10993:—Biological evaluation of medical devices
ISO 10993-7:2008(Edition 2)
Ethylene oxide sterilization residuals£129.60 members, £135.00 non-members
CH/194
Will be implemented as an identical British Standard
ISO Publications continued...
50 Update Standards Dec 2008Prices may be subject to change.
your order
ISO 16000:—Indoor air
ISO 16000-13:2008Determination of total (gas and particle-phase)polychlorinated dioxin-like biphenyls (PCBs) andpolychlorinated dibenzo-p-dioxidibenzofurans(PCDDs/PCDFs). Collection on sorbent-backedfilters£83.52 members, £87.00 non-members
EH/2/3
Will be implemented as an identical British Standard
ISO/IEC 16022:—Information technology. Automaticidentification and data capture techniques.Data matrix bar code symbology specification
CORRIGENDUM 1:October 2008
to ISO/IEC 16022:2006IST/34
Will be implemented as an identical British Standard
ISO 16634:—Food products. Determination of the totalnitrogen content by combustion according tothe Dumas principle and calculation of thecrude protein content
ISO 16634-1:2008Oilseeds and animal feeding stuffs£83.52 members, £87.00 non-members
AW/4
Will be implemented as an identical British Standard
ISO 18436:—Condition monitoring and diagnostics ofmachines. Requirements for qualification andassessment of personnel
ISO 18436-4:2008Field lubricant analysis£57.60 members, £60.00 non-members
GME/21/7
Will be implemented as an identical British Standard
ISO 18436-6:2008Acoustic emission£49.92 members, £52.00 non-members
GME/21/7
Will be implemented as an identical British Standard
ISO 18436-7:2008Thermography£62.40 members, £65.00 non-members
GME/21/7
Will be implemented as an identical British Standard
ISO 18921:2008(Edition 2)
Imaging materials. Compact discs (CD-ROM).Method for estimating the life expectancybased on the effects of temperature andrelative humidity£65.28 members, £68.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO/IEC 14496-4:— (CD-ROM)Conformance testing
AMENDMENT 27:October 2008
to ISO/IEC 14496-4:2004£11.52 members, £12.00 non-members
IST/37
Will not be implemented as a British Standard
ISO/IEC 14496-9:2008 (CD-ROM)(Edition 2)
Reference hardware description£223.68 members, £233.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/IEC 14496-10:2008 (CD-ROM)(Edition 4)
Advanced video coding£194.88 members, £203.00 non-members
IST/37
Will not be implemented as a British Standard
ISO/IEC 14496-12:2008(Edition 3)
ISO base media file format£137.28 members, £143.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 15783:—Seal-less rotodynamic pumps. Class II.Specification
AMENDMENT 1:November 2008
to ISO 15783:2002£11.52 members, £12.00 non-members
MCE/6
Will be implemented as an identical British Standard
ISO 15784:—Intelligent transport systems (ITS). Dataexchange involving roadside modulescommunication
ISO 15784-1:2008General principles and documentationframework of application profiles£45.12 members, £47.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO 15784-3:2008Application profile-data exchange (AP-DATEX)£57.60 members, £60.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO/TR 15847:2008Graphic technology. Graphical symbols forprinting press systems and finishing systems,including related auxiliary equipment£120.00 members, £125.00 non-members
PAI/43
Will not be implemented as a British Standard
ISO 13680:2008(Edition 2)
Petroleum and natural gas industries.Corrosion-resistant alloy seamless tubes for useas casing, tubing and coupling stock. Technicaldelivery conditions£129.60 members, £135.00 non-members
PSE/17/-/5
Will be implemented as an identical British Standard
ISO 13943:2008(Edition 2)
Fire safety. Vocabulary£105.60 members, £110.00 non-members
FSH/9
Will be implemented as an identical British Standard
ISO/IEC 14102:2008(Edition 2)
Information technology. Guideline for theevaluation and selection of CASE tools£94.08 members, £98.00 non-members
IST/15
Will be implemented as an identical British Standard
ISO 14172:2008(Edition 2)
Welding consumables. Covered electrodes formanual metal arc welding of nickel and nickelalloys. Classification£62.40 members, £65.00 non-members
WEE/39
Will be implemented as an identical British Standard
ISO 14310:2008(Edition 2)
Petroleum and natural gas industries.Downhole equipment. Packers and bridge plugs£78.72 members, £82.00 non-members
PSE/17/-/4
Will be implemented as an identical British Standard
ISO/IEC 14496:—Information technology. Coding of audio-visualobjects
ISO/IEC 14496-4:— (CD-ROM)Conformance testing
AMENDMENT 20:August 2008
to ISO/IEC 14496-4:2004£11.52 members, £12.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/IEC 14496-4:— (CD-ROM)Conformance testing
AMENDMENT 26:October 2008
to ISO/IEC 14496-4:2004£11.52 members, £12.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO Publications continued...
52 Update Standards Dec 2008Prices may be subject to change.
ISO 23868:2008Document management. Monitoring andverification of information stored on 130 mmoptical media£38.40 members, £40.00 non-members
IDT/1/1
Will be implemented as an identical British Standard
ISO/TR 24156:2008Guidelines for using UML notation interminology work£65.28 members, £68.00 non-members
TS/1
Will be implemented as an identical British Standard
ISO 24394:2008Welding for aerospace applications.Qualification test for welders and weldingoperators. Fusion welding of metalliccomponents£83.52 members, £87.00 non-members
WEE/-/1
Will be implemented as an identical British Standard
ISO 24538:2008Plastics. Homopolymer and copolymer resins ofvinyl chloride. Determination of residual vinylchloride monomer by gas-chromatographicanalysis of dry powder£45.12 members, £47.00 non-members
PRI/21
Will be implemented as an identical British Standard
ISO/IEC 24727:—Identification cards. Integrated circuit cardprogramming interfaces
ISO/IEC 24727-4:2008Application programming interface (API)administration£129.60 members, £135.00 non-members
IST/17
Will be implemented as an identical British Standard
ISO/IEC 24757:2008Information technology. Keyboard interactionmodel. Machine-readable keyboard description£146.88 members, £153.00 non-members
ICT/-/1
Will not be implemented as a British Standard
ISO 26424:2008Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of theabrasion resistance of coatings by a micro-scaleabrasion test£57.60 members, £60.00 non-members
RPI/13
Will be implemented as an identical British Standard
ISO 28702:2008Rubber and plastics hoses and tubing. Textile-reinforced types. Sub-ambient temperaturecrush test£28.80 members, £30.00 non-members
PRI/66
Will be implemented as an identical British Standard
ISO 21212:2008Intelligent transport systems. Communicationsaccess for land mobiles (CALM). 2G Cellularsystems£38.40 members, £40.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO 21213:2008Intelligent transport systems. Communicationsaccess for land mobiles (CALM). 3G Cellularsystems£38.40 members, £40.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO/IEC 21827:2008(Edition 2)
Information technology. Security techniques.Systems Security Engineering. CapabilityMaturity Model® (SSE-CMM®)£146.88 members, £153.00 non-members
IST/33
Will be implemented as a British Standard
ISO 22702:— (CD-ROM)Utility lighters. General consumer-safetyrequirements
AMENDMENT 1:September 2008
to ISO 22702:2003£28.80 members, £30.00 non-members
CW/32
Will be implemented as an identical British Standard
ISO 22915:—Industrial trucks. Verification of stability
ISO 22915-1:2008General£38.40 members, £40.00 non-members
MHE/7
Will be implemented as an identical British Standard
ISO/IEC 23000:—Information technology. Multimedia applicationformat (MPEG-A)
ISO/IEC 23000-7:2008 (CD-ROM)Open access application format£91.20 members, £95.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/IEC 23000-9:2008 (CD-ROM)Digital Multimedia Broadcasting applicationformat£94.08 members, £98.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 18925:2008(Edition 2)
Imaging materials. Optical disc media. Storagepractices£49.92 members, £52.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO 18927:2008(Edition 2)
Imaging materials. Recordable compact discsystems. Method for estimating the lifeexpectancy based on the effects of temperatureand relative humidity£78.72 members, £82.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO/IEC 19776:—Information technology. Computer graphics,image processing and environmental datarepresentation. Extensible 3D (X3D) encodings
ISO/IEC 19776-2:2008(Edition 2)
Classic VRML encoding£28.80 members, £30.00 non-members
IST/31
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 20283:—Mechanical vibration. Measurement of vibrationon ships
ISO 20283-2:2008Measurement of structural vibration£57.60 members, £60.00 non-members
GME/21/5
Will be implemented as an identical British Standard
ISO 20712:—Water safety signs and beach safety flags
ISO 20712-1:2008 (CD-ROM)Specifications for water safety signs used inworkplaces and public areas£105.60 members, £110.00 non-members
PH/8/1
Will be implemented as an identical British Standard
ISO 20860:—Road vehicles. 50 ohms impedance radiofrequency connection system interface
ISO 20860-1:2008Dimensions and electrical requirements£49.92 members, £52.00 non-members
AUE/9
Will be implemented as an identical British Standard
Update Standards Dec 2008 Prices may be subject to change. 53
ISO 29767:2008Thermal insulating products for buildingapplications. Determination of short-term waterabsorption by partial immersion£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29768:2008Thermal insulating products for buildingapplications. Determination of lineardimensions of test specimens£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29769:2008Thermal insulating products for buildingapplications. Determination of behaviour underpoint load£45.12 members, £47.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29770:2008Thermal insulating products for buildingapplications Determination of thickness forfloating-floor insulating products£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29771:2008Thermal insulating materials for buildingapplications. Determination of organic content£38.40 members, £40.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29467:2008Thermal insulating products for buildingapplications. Determination of squareness£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29468:2008Thermal insulating products for buildingapplications. Determination of flatness£28.80 members, £30.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29469:2008Thermal insulating products for buildingapplications. Determination of compressionbehaviour£45.12 members, £47.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29471:2008Thermal insulating products for buildingapplications. Determination of dimensionalstability under constant normal laboratoryconditions (23°C/50% relative humidity)£38.40 members, £40.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29472:2008Thermal insulating products for buildingapplications. Determination of dimensionalstability under specified temperature andhumidity conditions£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29764:2008Thermal insulating products for buildingapplications. Determination of deformationunder specified compressive load andtemperature conditions£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29765:2008Thermal insulating products for buildingapplications. Determination of tensile strengthperpendicular to faces£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29766:2008Thermal insulating products for buildingapplications. Determination of tensile strengthparallel to faces£33.60 members, £35.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 28722:2008Vitreous and porcelain enamels. Characteristicsof enamel coatings applied to steel panelsintended for architecture£33.60 members, £35.00 non-members
STI/33
Will be implemented as an identical British Standard
ISO 28723:2008Vitreous and porcelain enamels. Determinationof the edge covering on enamelled steel plateto be used in heat exchangers£33.60 members, £35.00 non-members
STI/33
Will be implemented as an identical British Standard
ISO 28762:2008Vitreous and porcelain enamels. Enamelcoatings applied to steel for writing surfaces.Specification£28.80 members, £30.00 non-members
STI/33
Will be implemented as an identical British Standard
ISO 28763:2008Vitreous and porcelain enamels. Regenerative,enamelled and packed panels for air-gas andgas-gas heat exchangers. Specifications£45.12 members, £47.00 non-members
STI/33
Will be implemented as an identical British Standard
ISO 28764:2008Vitreous and porcelain enamels. Production ofspecimens for testing enamels on sheet steel,sheet aluminium and cast iron£33.60 members, £35.00 non-members
STI/33
Will be implemented as an identical British Standard
ISO/TR 29381:2008Metallic materials. Measurement of mechanicalproperties by instrumented indentation test.Indentation tensile properties£78.72 members, £82.00 non-members
ISE/NFE/4
Will not be implemented as a British Standard
ISO 29465:2008Thermal insulating products for buildingapplications. Determination of length andwidth£28.80 members, £30.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO 29466:2008Thermal insulating products for buildingapplications. Determination of thickness£45.12 members, £47.00 non-members
B/540/8
Will be implemented as an identical British Standard
ISO Publications continued...
54 Update Standards Dec 2008Prices may be subject to change.
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you