PRODUCTCATALOGUE

Digital Tap Position Indicator

19 TAP to BCD Converter

Digital Tap Position Indicator

Key BenefitPrecisionCompact sizedWide voltage aux. rangeWide input selectionEnergy savingEasily maintainedQuick installation

General DescriptionSpace limitations on the control panel due to the application of SAS requires a mounted equipment has dimensions as small as possible, as well as the monitoring equipment of tap position on the transformer. A combination of dry contact as an indication of tap position is still considered as the best way. This device is designed in a compact size and has a variety of dry contact input selected from BCD to 19 TAP.

Technical DataAuxiliary voltage 80-130 VDC

Input Voltage 110 VDC

Power Consumption Less than 5W2Connection 3 pressure clamps for standard wire 0.5-1 .5mm2(With wire end ferrule)and rigid wire 0.5-1.5mm

Dimension 96x48mm

Mounting Flush mounting

Display Two seven segment displays 19 TAP

Operating/storage temp -40 to +55 C

Accessories Screw fixing.

Ordering Code

Dimension

True Table

Terminal Connection

Dimension

True Table

Terminal Connection

yourBESTpartner

Dimension

True Table

Terminal Connection

19 TAP to BCD Converter

General DescriptionThe best way to monitor the transformer TAP position with IEC 61850 based IED is using binary coded decimal (BCD) dry contact as an input of indication of TAP position. Unfortunately, not all, even old designed transformers do not provide this facility. Usually they provide 19 TAP dry contact facility as indication. This device convert 19 TAP dry contact to binary coded decimal (BCD) and can be mounted as well as in transformers local control or control panels.

Key BenefitPrecisionCompact sized with high power outputWide voltage aux. rangeWide operating temperatureOutdoor/Indoor InstalledEasily maintainedQuick installation

Technical DataAuxiliary voltage 80-130 VDC

Input Voltage 110 VDC

Output Voltage 110 VDC

Power Output Up to 250 Watt2Connection Ringlug for standard wire 0.5-2.5mm

Fitting position Vertical/Horizontal

Mounting Clip for 35mm DIN rail

Operating/storage temp -40 to +55 C

Accessories Clip fixing.Ordering Code

Office and WarehouseUbud VillageKuta Business CentreBlok A No. 18, Jln. Ciledug RayaKota Tangerang, Provinsi Banten 15151

Indonesia

Phone

Fax

62-21 730.999762-21 730.9998

62-21 2943.1199

Mail and Siteinfo@luxonmandiri.comwww.luxonmandiri.com

Terminal Block, Surge Arrester

Phoenix Contact

Power Control

GE

MV Panel - Uni Switch

ABB

Capacitor Modul & Reactor

System Electric

Battery Charger

NIKSA

Battery Nickel CadmiumNICA

Battery Lead AcidUltralead

Panel Enclosure

Liquid Mercury Lamp

Megaman

Electronic Product Relay

ABB

Automatic Capacitor Bank

System Electric

Test Switch, Discrepency Switch

Fuji Electric

Wiring Accessories

OURPRODUCTS

Socket & Accessories for Relay

Finder

Digital/Analog Instrumention & Sensor

Poundful

TCS Relay

Siemens