Bronze & Brass Valves - KITZ
-
Upload
truongcong -
Category
Documents
-
view
228 -
download
4
Transcript of Bronze & Brass Valves - KITZ
Bronze & Brass ValvesJIS 5K/10K, ASME Class 125/150/300, KITZ Type 100/125/150/300/400/600
Presenting Design Features ofKITZ Bronze/Brass Valves
01
As a world leading manufacturer of general service valves, KITZ Corporation is glad to present you a broad range of our KITZ bronze/brass valves for your commercial and industrial applications.
KITZ bronze/brass valves are produced in modern factories used exclusively for valve manufacturing. Each phase of the manufacturing process, from selection of raw materials to casting, forging, machining, assembly and testing, has been improved with automated production facilities and unparalleled production technology. Standardization and automation yield KITZ bronze/brass valves of superior quality and higher uniformity at competitive prices supported by incomparably prompt delivery.
KITZ bronze/brass valves are all designed by the state-of-the-art computors, built by automation and inspected by the people who care the quality.
Human Engineering in Handwheel DesignComputer designed handwheels of all KITZ bronze/brass valves, the product of KITZ human engineering, are featured with an ideal combination of an operational efficiency and high mechanical strength for reliability.
Asbestos-free Gland PackingsAll KITZ bronze/brass gate and globe valves employ Aramid Fiber PTFE as the material of asbestos-free gland packing, meeting the latest industrial demand to minimize pollutional concerns. With its leak-free sealing performance and reduced valve operating torque, Aramid Fiber PTFE is considered a reliable substitution for conventional asbestos sheet for service of water, oil, gas and saturated steam pressure of maximum 300psi within the temperature range up to 300˚C.
Pressure RatingThe pressure rating designation of KITZ valves follows the accepted practice of the valve and pipe fitting industry today. Each product is rated for W.O.G. (Non-shock cold water, oil, and gas*) and Saturated steam pressure service.
Inspection and TestingKITZ valves are manufactured under strict quality control throughout all stages of production, beginning with inspection of chemical composition and mechanical properties of materials. Extra care is given to inspection and testing at all machine shops and assembly plants, utilizing up-to-date precision equipment. All KITZ valves are subjected to strict pressure testing of body and seat sealing to assure long-life service and quality performance.
*The valves introduced in this catalog are not designed to handle toxic gases. Use specially designed or certified valves for flammable gas service.
This catalog use MPa, a SI unit, for indication of pressures. For readers' convenience, however psi is also used for ASME and JIS related products respectively.The products introduced in this catalog are all covered by the ISO 9001 Certification.
KITZ Corporation, Nagasaka Plant, Japan (ISO 9001) KITZ (Thailand) Ltd, Bangkok Plant, Thailand (ISO 9002)
C3TM
TM
TK AKTK TKT
TKW
TF
TFJ
TL TLT
CTLTU
CTL
TLTU
AK3TM
ZO
ZS
ZET
AKSZA
SZA
CSZA
CSZAWAKSZAW
TN AKTN CTN
T4LT4T AKT4T
CTNPAKTNP
Ball valves 40040040060060040040040040010K600600400600600600600400400400
BallBallBallBallBall
Full bore BallFull bore Ball
BallBallBallBall
Full bore BallBall
Full bore BallFull bore BallFull bore BallFull bore Ball
3-Way Ball3-Way Ball3-Way Ball
BrassBrassBrassBrassBrassBrassBrass
BronzeBronzeBronzeBrassBrassBrassBrassBrassBrassBrassBrass
BronzeBrass
ThreadedThreaded(F&M)
ThreadedThreadedThreadedThreadedThreaded
Threaded/SolderedThreaded/Union T/S
FlangedThreaded/Soldered
Threaded(F&M)ThreadedThreadedThreaded
Threaded/SolderedThreaded
Threaded/SolderedThreaded
Threaded/Soldered
2727282828292929303030313131323232333333
NAH
NSH
INAH
INSH
RAH
RSH
CNAH
CNSH
CRAH
CRSH
RTRM
RTRO
RTRR
RTRU
Fancoil valves 20020020020020020020020020020010K10K10K10K
AngleStraightAngle
StraightAngle
StraightAngle
StraightAngle
StraightBallBallBallBall
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedThreadedThreaded
Threaded-SolderedThreaded-SolderedThreaded-SolderedThreaded-Soldered
ThreadedThreaded(F&M)Threaded(F&M)Threaded/Union
TGGas Service valves Ball Brass Threaded 35
AKTAF
CTAF
AKTFLL CTFLL
CTAFM
CTAFD
CTAFC
AKTAFM
AKTAFP
AKTAFPM
AKTAFD
AKTAFC
AKTAFO
AKTAFU
AKTAFS
TH
T
CTH
AKT TT
TO
Ball valves 600600600600600600600600600600200
400/600
Full bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore Ball
Ball
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedSoldered
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/SolderedThreaded(M&F)Threaded/Union
ThreadedThreaded/Soldered
232323242424252525262627
A AKA
Q QA
C AKC
CA AKCA
B BH
G AKG
D
DB DBH
FR AKFS CFS
FH AKFH CFH
H AKH CH
E
EB EBH
F AKF
R AKR CR
RF AKAF CAF
VF
FT&FTS
Y AKY CY
YR
FV
CONTENTS
02 03
Tite Fig Class Type PageBody Material End Connection Tite Fig Class Type PageBody Material End Connection
KITZ Standardgate, globe, check,angle & butterfly valves,Y-pattern strainers.
100
150150150125150150125125125125150150150125125150(5K)(5K)
150175
GlobeGlobeGlobeAngleGlobeGlobeGlobeGlobeGateGateGateGateGateGate
Lift CheckSwing CheckSwing Check
Lift CheckLift Check
FootStrainerButterfly
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrassBrass
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedFlanged
ThreadedThreadedFlanged
Threaded/SolderedThreaded/SolderedThreaded/Soldered
ThreadedThreadedFlanged
ThreadedThreaded/Soldered
ThreadedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded
666777888999
10101011111112121213
AK125M C125M
AK125E C125E
S
AK150E
AK150L C150L
AK150LU
AK300LU
C150LU
AK125C C125C
AK150D
AK300D
AK300J
C150D
AKYR CYR
AK150YR C150YR
AK300YR
AS-FH
Industrialgate, globe & Check valves
125125150150150300125150300300125150300
PN16
GateGateGateGateGateGateGlobeGlobeGlobeGlobe
Swing CheckSwing CheckSwing Check
Gate
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrass
Threaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
1818181919192020202121212222
J
JB
M
L
LB
O
OB
10BW
JIS Standardgate, globe & Check valves
10K10K5K10K10K10K10K10K
GlobeGlobeGateGateGate
Swing CheckSwing CheckWafer Check
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedFlanged
ThreadedThreadedFlanged
ThreadedFlangedWafer
1414141515151616
3636363737373838383940404041
S1
S2
S22
S3
S4
S5
S52
S6
S23N
S24N
S25N
S28N
Utility Ball valves 10K10K10K10K10K10K10K10K10K10K10K10K10K10K
StraightStraightStraightStraightStraightAngleAngleAngle
Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreaded
Threaded(F&M)Threaded(F&M)Threaded(F&M)
4343434444444545464747474848
BS
BSS
RTUC
Balancing valves 10K10K10K
BalancerBalancer
Constant flow Valve
BronzeBronzeBronze
ThreadedThreadedThreaded
414142
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
TB
The valves introduced in this catalog are not designed to handle toxic gases.Use specially designed or certified valves for flammable gas service.CAUTION
S24N - 3/4 x
S28N - 3/4 x
C3TM
TM
TK AKTK TKT
TKW
TF
TFJ
TL TLT
CTLTU
CTL
TLTU
AK3TM
ZO
ZS
ZET
AKSZA
SZA
CSZA
CSZAWAKSZAW
TN AKTN CTN
T4LT4T AKT4T
CTNPAKTNP
Ball valves 40040040060060040040040040010K600600400600600600600400400400
BallBallBallBallBall
Full bore BallFull bore Ball
BallBallBallBall
Full bore BallBall
Full bore BallFull bore BallFull bore BallFull bore Ball
3-Way Ball3-Way Ball3-Way Ball
BrassBrassBrassBrassBrassBrassBrass
BronzeBronzeBronzeBrassBrassBrassBrassBrassBrassBrassBrass
BronzeBrass
ThreadedThreaded(F&M)
ThreadedThreadedThreadedThreadedThreaded
Threaded/SolderedThreaded/Union T/S
FlangedThreaded/Soldered
Threaded(F&M)ThreadedThreadedThreaded
Threaded/SolderedThreaded
Threaded/SolderedThreaded
Threaded/Soldered
2727282828292929303030313131323232333333
NAH
NSH
INAH
INSH
RAH
RSH
CNAH
CNSH
CRAH
CRSH
RTRM
RTRO
RTRR
RTRU
Fancoil valves 20020020020020020020020020020010K10K10K10K
AngleStraightAngle
StraightAngle
StraightAngle
StraightAngle
StraightBallBallBallBall
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedThreadedThreaded
Threaded-SolderedThreaded-SolderedThreaded-SolderedThreaded-Soldered
ThreadedThreaded(F&M)Threaded(F&M)Threaded/Union
TGGas Service valves Ball Brass Threaded 35
AKTAF
CTAF
AKTFLL CTFLL
CTAFM
CTAFD
CTAFC
AKTAFM
AKTAFP
AKTAFPM
AKTAFD
AKTAFC
AKTAFO
AKTAFU
AKTAFS
TH
T
CTH
AKT TT
TO
Ball valves 600600600600600600600600600600200
400/600
Full bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore BallFull bore Ball
Ball
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedSoldered
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/SolderedThreaded(M&F)Threaded/Union
ThreadedThreaded/Soldered
232323242424252525262627
A AKA
Q QA
C AKC
CA AKCA
B BH
G AKG
D
DB DBH
FR AKFS CFS
FH AKFH CFH
H AKH CH
E
EB EBH
F AKF
R AKR CR
RF AKAF CAF
VF
FT&FTS
Y AKY CY
YR
FV
CONTENTS
02 03
Tite Fig Class Type PageBody Material End Connection Tite Fig Class Type PageBody Material End Connection
KITZ Standardgate, globe, check,angle & butterfly valves,Y-pattern strainers.
100
150150150125150150125125125125150150150125125150(5K)(5K)
150175
GlobeGlobeGlobeAngleGlobeGlobeGlobeGlobeGateGateGateGateGateGate
Lift CheckSwing CheckSwing Check
Lift CheckLift Check
FootStrainerButterfly
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrassBrass
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedThreadedThreadedThreadedFlanged
ThreadedThreadedFlanged
Threaded/SolderedThreaded/SolderedThreaded/Soldered
ThreadedThreadedFlanged
ThreadedThreaded/Soldered
ThreadedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded
66677788899910101011111112121213
AK125M C125M
AK125E C125E
S
AK150E
AK150L C150L
AK150LU
AK300LU
C150LU
AK125C C125C
AK150D
AK300D
AK300J
C150D
AKYR CYR
AK150YR C150YR
AK300YR
AS-FH
Industrialgate, globe & Check valves
125125150150150300125150300300125150300
PN16
GateGateGateGateGateGateGlobeGlobeGlobeGlobe
Swing CheckSwing CheckSwing Check
Gate
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBronzeBrass
Threaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded/SolderedThreaded/Soldered
ThreadedThreaded
Threaded/SolderedThreaded/Soldered
ThreadedThreaded
1818181919192020202121212222
J
JB
M
L
LB
O
OB
10BW
JIS Standardgate, globe & Check valves
10K10K5K10K10K10K10K10K
GlobeGlobeGateGateGate
Swing CheckSwing CheckWafer Check
BronzeBronzeBronzeBronzeBronzeBronzeBronzeBronze
ThreadedFlanged
ThreadedThreadedFlanged
ThreadedFlangedWafer
1414141515151616
3636363737373838383940404041
S1
S2
S22
S3
S4
S5
S52
S6
S23N
S24N
S25N
S28N
Utility Ball valves 10K10K10K10K10K10K10K10K10K10K10K10K10K10K
StraightStraightStraightStraightStraightAngleAngleAngle
Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)Ball(Built in Check)
BrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrassBrass
ThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreaded
Threaded(F&M)Threaded(F&M)Threaded(F&M)
4343434444444545464747474848
BS
BSS
RTUC
Balancing valves 10K10K10K
BalancerBalancer
Constant flow Valve
BronzeBronzeBronze
ThreadedThreadedThreaded
414142
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
TB
The valves introduced in this catalog are not designed to handle toxic gases.Use specially designed or certified valves for flammable gas service.CAUTION
S24N - 3/4 x
S28N - 3/4 x
Cu
83.0-87.0
Sn
4.0-6.0
Zn
4.0-6.0
Pb
4.0-6.0
Ni Fe P Sb Al Si
0.01Max.
0.01Max.
0.2Max.
0.05Max.
0.3Max.
1.0Max.
KITZ BRONZE & BRASS VALVES
KITZ “K-Metal”: Unique Dezincification Resistant Brass (UNS No. C35350)
KITZ BRONZE & BRASS VALVES
04 05
What is dezincification?
The following factors cause dezincification. These factors are generally believed to occurtogether, rather than independently.
Excessive aqueous solution in acidity.Warm water containing excessive free carbonic acid with high electric conductivity.High electric conductivity with excessive presence of chlorides and sulfides.Copper or vinyl chloride pipes.Excessive dissolved oxygen.
Solder joint end valves should not be used in servicewhere the temperature of the line fluid if higherthan the softening point of solder.
Water pollution and employment of new piping material have amplified valve dezincification problems.
KITZ Bronze and Brass Materials to JIS Standards
KITZ Bronze and Brass Materials to ASTM Standards
The copper alloy used in bronze valves contains zinc, tin, and lead with copper as a base. When bronze valves are subjected to unfavorable service conditions, the zinc component contained in the copper alloy separates from the copper base, and the metal corrodes. This is called dezincification. In case of bronze valve, the body, bonnet, and other cast bronze parts hardly corrode due to the small percent of zinc contained in the alloy. But brass valve parts such as stems, which contain 40% zinc, often corrodes due to extreme dezincification.
Copper tubing is widely used with bronze/brass valves in steam and water-line applications in schools, hospitals, hotels, and private houses because of excellent physical characteristics. It resists corrosion, meets sanitation require- ments, and is easy to install.Copper Tubes: There are three types of copper tubing for complying with ASTM B88 shown below.Each type is provided with a different wall thickness to meet application requirements.
Fig. 1 Compared tensile strength Fig. 2 Compared hardness Fig. 3 Compared corrosion(1mg/cm2=0.014mlb/in2)
Fig. 4 Compared dezincification(to AS C316)
What causes dezincification? 1
2
3
4
5
JIS H5120-2009 (Copper & Copper Alloy Castings)
Bronze/Brass Valve Solder Joints
Use solder of 95-5 tin-antimony or 96-4 tin-silver, and an open-flame torch. Keep torch temperature relatively low to assure a firmly soldered joint. Because the solder melting point ranges 500˚F (260˚C) solder jointed valves cannot be used for high temperature service.
Soldering Leak-free Joints
CastbronzeClass 6
Chemical composition (%) Mechanical propertyDesignation
CAC406 (BC6)
Tensile strength195 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.0-2.5
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2010 (Copper & Copper Alloy Rods and Bars)
ForgedbrassAlloyNo.3771
Chemical composition (%) Mechanical propertyDesignation
C3771BE C3771BD
Tensile strength315 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.8-3.7
Fe
0.5 Max.
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2010 (Copper & Copper Alloy Rods and Bars)
Free-cuttingbrassAlloyNo.3604
Chemical composition (%) Mechanical propertyDesignation
C3604BE C3604BD
Tensile strength335 Min. (N/mm2)
Elongation(%)-
Copper
84.0-86.0 4.0-6.0 4.0-6.0 4.0-6.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.30Max.
Sulfer
0.08Max.
Phosphorus
0.05Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
ASTM B62-2002
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.20%
Yieldstrength
14 ksi
Tensilestrength
30 ksi
Solder P-T Rating
Copper
78.0-82.0 2.3-3.5 6.0-8.0 7.0-10.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.40Max.
Sulfer
0.08Max.
Phosphorus
0.02Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.18%
Yieldstrength
13 ksi
Tensilestrength
29 ksi
ASTM B584 C84400-2004
Copper
58.0-61.0
Lead
1.5-2.5
Iron
0.30 Max.
Zinc
Remainder
ASTM B283 C37700-2004
Chemical composition (%) Mechanical properties
Minimum
Yield strength18 ksi
Elongation in 4x thickness25%
Tensile strength50 ksi
K-Metal
0 20 40
Tensile Strength (ksi)
60 80
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40 60 80
Hardness (HRB)
100
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40
Corrosion Quantity (mg/cm2)
60
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 0.01 0.02
Dezincification Depth (inch)
0.03 0.04
B-124No.C377700
B16
Competitor’sMaterial
B62
For use in steam, oil and gas lines for undergroundinstallation and/or severe conditions.
For general cooling and heating systems and relatedwater piping and ventilation systems.
For home air-conditioning and heating applications.
Type K
Type L
Type M
CAUTION
psi MPa psi
Max. working pressure
MPa psi
38
66
93
121
3.45
2.76
2.07
1.38
MPa
size 1/4”~1” size 1/4”~2” size 21/4”~4”SolderMax.temp.
(˚C)
95-5tin-antimony[H95 Sb-5A]
96-4tin-silver
[H96 Ag-3.5A]
500
400
300
200
2.76
2.41
1.72
1.21
400
350
250
175
2.07
1.90
1.38
1.03
300
275
200
150
Compliance with RoHS Requirements.
Aiming to reduce the negative environmental health impact, KITZ CORPORATION can offer products which meet the restriction of the use of six hazardous substances imposed by RoHS* directive of EU, namely mercury, lead, cadmium, hexavalent chromium, PBB and PBDE, to the market. The products meeting this requirement bear the symbol shown below. Please consult KITZ for more details on these products.
*The Restriction of the use of certain Hazardous Substances in electrical and electronic equipmentSymbol
®
Cu
83.0-87.0
Sn
4.0-6.0
Zn
4.0-6.0
Pb
4.0-6.0
Ni Fe P Sb Al Si
0.01Max.
0.01Max.
0.2Max.
0.05Max.
0.3Max.
1.0Max.
KITZ BRONZE & BRASS VALVES
KITZ “K-Metal”: Unique Dezincification Resistant Brass (UNS No. C35350)
KITZ BRONZE & BRASS VALVES
04 05
What is dezincification?
The following factors cause dezincification. These factors are generally believed to occurtogether, rather than independently.
Excessive aqueous solution in acidity.Warm water containing excessive free carbonic acid with high electric conductivity.High electric conductivity with excessive presence of chlorides and sulfides.Copper or vinyl chloride pipes.Excessive dissolved oxygen.
Solder joint end valves should not be used in servicewhere the temperature of the line fluid if higherthan the softening point of solder.
Water pollution and employment of new piping material have amplified valve dezincification problems.
KITZ Bronze and Brass Materials to JIS Standards
KITZ Bronze and Brass Materials to ASTM Standards
The copper alloy used in bronze valves contains zinc, tin, and lead with copper as a base. When bronze valves are subjected to unfavorable service conditions, the zinc component contained in the copper alloy separates from the copper base, and the metal corrodes. This is called dezincification. In case of bronze valve, the body, bonnet, and other cast bronze parts hardly corrode due to the small percent of zinc contained in the alloy. But brass valve parts such as stems, which contain 40% zinc, often corrodes due to extreme dezincification.
Copper tubing is widely used with bronze/brass valves in steam and water-line applications in schools, hospitals, hotels, and private houses because of excellent physical characteristics. It resists corrosion, meets sanitation require- ments, and is easy to install.Copper Tubes: There are three types of copper tubing for complying with ASTM B88 shown below.Each type is provided with a different wall thickness to meet application requirements.
Fig. 1 Compared tensile strength Fig. 2 Compared hardness Fig. 3 Compared corrosion(1mg/cm2=0.014mlb/in2)
Fig. 4 Compared dezincification(to AS C316)
What causes dezincification? 1
2
3
4
5
JIS H5120-2009 (Copper & Copper Alloy Castings)
Bronze/Brass Valve Solder Joints
Use solder of 95-5 tin-antimony or 96-4 tin-silver, and an open-flame torch. Keep torch temperature relatively low to assure a firmly soldered joint. Because the solder melting point ranges 500˚F (260˚C) solder jointed valves cannot be used for high temperature service.
Soldering Leak-free Joints
CastbronzeClass 6
Chemical composition (%) Mechanical propertyDesignation
CAC406 (BC6)
Tensile strength195 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.0-2.5
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2010 (Copper & Copper Alloy Rods and Bars)
ForgedbrassAlloyNo.3771
Chemical composition (%) Mechanical propertyDesignation
C3771BE C3771BD
Tensile strength315 Min. (N/mm2)
Elongation(%)
15 Min.
DrawnExtruded Cu
57.0-61.0
Pb
1.8-3.7
Fe
0.5 Max.
Fe + Sn
1.0 Max.
Zn
Remainder
JIS H3250-2010 (Copper & Copper Alloy Rods and Bars)
Free-cuttingbrassAlloyNo.3604
Chemical composition (%) Mechanical propertyDesignation
C3604BE C3604BD
Tensile strength335 Min. (N/mm2)
Elongation(%)-
Copper
84.0-86.0 4.0-6.0 4.0-6.0 4.0-6.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.30Max.
Sulfer
0.08Max.
Phosphorus
0.05Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
ASTM B62-2002
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.20%
Yieldstrength
14 ksi
Tensilestrength
30 ksi
Solder P-T Rating
Copper
78.0-82.0 2.3-3.5 6.0-8.0 7.0-10.0
Tin Lead ZincNickel
&cobalt
1.0Max.
Iron
0.40Max.
Sulfer
0.08Max.
Phosphorus
0.02Max.
Antimony
0.25Max.
Aluminum
0.005Max.
Silicon
0.005Max.
Chemical composition (%) Mechanical properties
Minimum
Elongationin 2 in.18%
Yieldstrength
13 ksi
Tensilestrength
29 ksi
ASTM B584 C84400-2004
Copper
58.0-61.0
Lead
1.5-2.5
Iron
0.30 Max.
Zinc
Remainder
ASTM B283 C37700-2004
Chemical composition (%) Mechanical properties
Minimum
Yield strength18 ksi
Elongation in 4x thickness25%
Tensile strength50 ksi
K-Metal
0 20 40
Tensile Strength (ksi)
60 80
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40 60 80
Hardness (HRB)
100
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 20 40
Corrosion Quantity (mg/cm2)
60
B-124No.C377700
B16
Competitor’sMaterial
B62
K-Metal
0 0.01 0.02
Dezincification Depth (inch)
0.03 0.04
B-124No.C377700
B16
Competitor’sMaterial
B62
For use in steam, oil and gas lines for undergroundinstallation and/or severe conditions.
For general cooling and heating systems and relatedwater piping and ventilation systems.
For home air-conditioning and heating applications.
Type K
Type L
Type M
CAUTION
psi MPa psi
Max. working pressure
MPa psi
38
66
93
121
3.45
2.76
2.07
1.38
MPa
size 1/4”~1” size 1/4”~2” size 21/4”~4”SolderMax.temp.
(˚C)
95-5tin-antimony[H95 Sb-5A]
96-4tin-silver
[H96 Ag-3.5A]
500
400
300
200
2.76
2.41
1.72
1.21
400
350
250
175
2.07
1.90
1.38
1.03
300
275
200
150
Compliance with RoHS Requirements.
Aiming to reduce the negative environmental health impact, KITZ CORPORATION can offer products which meet the restriction of the use of six hazardous substances imposed by RoHS* directive of EU, namely mercury, lead, cadmium, hexavalent chromium, PBB and PBDE, to the market. The products meeting this requirement bear the symbol shown below. Please consult KITZ for more details on these products.
*The Restriction of the use of certain Hazardous Substances in electrical and electronic equipmentSymbol
®
H
L
D
H
L
D
H
L
D
H
L
L
D
H
L
D
H
L
D
KITZ BRONZE & BRASS VALVES
CLASS 100 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Dimensions mm
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
1/4
8mm
inch
406650
426750
486955
538060
639470
73104 80
81127 90
94147100
115179115
131200135
171250180
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
4100• Threaded end to BS21 (JIS B0203)
Fig. A
• Threaded end to ASME B1.20.1
Fig. AKA
• Rubber Disc
Fig. Q• PTFE Disc (for oil service)
Fig. QA
• Threaded end to BS21 (JIS B0203)
Fig. C
• Threaded end to ASME B1.20.1
Fig. AKC
• Threaded end to BS21 (JIS B0203)
Fig. CA
• Threaded end to ASME B1.20.1
Fig. AKCA
• Undrilled unless drilling is specified as an option
Fig. B
• Drilled according to JIS 10K
Fig. BH
• Threaded end to BS21 (JIS B0203)
Fig. G
• Threaded end to ASME B1.20.1
Fig. AKG
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 4 only
06 07
Dimensions mm1/4
8mm
inch
446650
446850
537960
659370
77104 80
85127 90
100145100
119174115
139199135
158215155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 3 only
Screwed Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)
Dimensions mm
BRONZE GLOBE VALVE
mm
inch
447050
507355
638660
73108 80
81132 90
94150100
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassUrethane rubber/PTFEAramid Fibers Graphite
CLASS 150 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPTBRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
216650
246850
287960
349370
40104 80
47127 90
52145100
61174115
74199135
85215155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 3 only
CLASS 150 BRONZE GLOBE VALVE
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
837960
889470
100105 80
113127 90
120145100
145174115
165198135
177215155
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
220250180
4100
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 3 and 4
CLASS 150 BRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
476850
538855
57100 60
66110 70
76120 80
88140 90
100156100
120185115
147210135
162229155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassG/F PTFEAramid Fibers Graphite
*Size 21/2 and 3
CLASS 125 BRONZE GLOBE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Angle type body, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Screwed Bonnet, Rising StemFlanged ends drilled or undrilled optionally.
Union Bonnet*, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203) or NPT
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
W.O.G. non-shock 1.03 MPa (150 psi), Saturated steam pressure 0.7 MPa (100 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
LHD
LHD
LHD
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
*Size 1¼ & lager = QA only
valve open
valve open
valve open
LHD
valve open
LHD
valve open
LHD
valve open
H
L
D
H
L
D
H
L
D
H
L
L
D
H
L
D
H
L
D
KITZ BRONZE & BRASS VALVES
CLASS 100 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Dimensions mm
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
1/4
8mm
inch
406650
426750
486955
538060
639470
73104 80
81127 90
94147100
115179115
131200135
171250180
3/8
10
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
804
100• Threaded end to BS21 (JIS B0203)
Fig. A
• Threaded end to ASME B1.20.1
Fig. AKA
• Rubber Disc
Fig. Q• PTFE Disc (for oil service)
Fig. QA
• Threaded end to BS21 (JIS B0203)
Fig. C
• Threaded end to ASME B1.20.1
Fig. AKC
• Threaded end to BS21 (JIS B0203)
Fig. CA
• Threaded end to ASME B1.20.1
Fig. AKCA
• Undrilled unless drilling is specified as an option
Fig. B
• Drilled according to JIS 10K
Fig. BH
• Threaded end to BS21 (JIS B0203)
Fig. G
• Threaded end to ASME B1.20.1
Fig. AKG
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 4 only
06 07
Dimensions mm1/4
8mm
inch
446650
446850
537960
659370
77104 80
85127 90
100145100
119174115
139199135
158215155
3/8
10
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 3 only
Screwed Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)
Dimensions mm
BRONZE GLOBE VALVE
mm
inch
447050
507355
638660
73108 80
81132 90
94150100
1/2
15
3/4
201
2511/4
3211/2
402
50
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassUrethane rubber/PTFEAramid Fibers Graphite
CLASS 150 Screwed Bonnet, Rising StemThreaded ends to BS21 (JIS B0203) or NPTBRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
216650
246850
287960
349370
40104 80
47127 90
52145100
61174115
74199135
85215155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 3 only
CLASS 150 BRONZE GLOBE VALVE
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
837960
889470
100105 80
113127 90
120145100
145174115
165198135
177215155
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
220250180
4100
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 3 and 4
CLASS 150 BRONZE GLOBE VALVE
Dimensions mm1/4
8mm
inch
476850
538855
57100 60
66110 70
76120 80
88140 90
100156100
120185115
147210135
162229155
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassG/F PTFEAramid Fibers Graphite
*Size 21/2 and 3
CLASS 125 BRONZE GLOBE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Angle type body, Rising StemThreaded ends to BS21 (JIS B0203) or NPT
Screwed Bonnet, Rising StemFlanged ends drilled or undrilled optionally.
Union Bonnet*, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203) or NPT
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
Nominal Size
W.O.G. non-shock 1.03 MPa (150 psi), Saturated steam pressure 0.7 MPa (100 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
LHD
LHD
LHD
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
*Size 1¼ & lager = QA only
valve open
valve open
valve open
LHD
valve open
LHD
valve open
LHD
valve open
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
Dimensions mm
*Shall not be in accordance with JIS B 2240
*21/2 and 3 = AKFS only
mm
inch
82113 60
95138 90
108156100
120184115
140187115
165212135
190244155
220281180
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
270321225
4100
Nominal Size
Dimensions mm
mm
inch
42457350
47608755
50709760
60 77117 70
63 86126 80
72102154 90
80
167100
90
200115
1/2
1538
7350
3/8
10
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
LL1HD
KITZ BRONZE & BRASS VALVES
CLASS 150 Union Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. D
• Undrilled unless drilling is specified as an option
Fig. DB
• Drilled according to JIS 10K
Fig. DBH
• Threaded end to BS21 (JIS B0203)
Fig. FH
• Threaded end to ASME B1.20.1
Fig. AKFH
• Solder joint endsto ASME B16.18
Fig. CFH
• Threaded end to BS21 (JIS B0203)
Fig. H
• Threaded end to ASME B1.20.1
Fig. AKH
• Solder joint endsto ASME B16.18
Fig. CH
• Threaded end to BS21 (JIS B0203)
Fig. FR
• Threaded end to ASME B1.20.1
Fig. AKFS
• Solder joint endsto ASME B16.18
Fig. CFS
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassG/F PTFEAramid Fibers Graphite
*Size 11/2 & 2
08 09
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassAramid Fibers Graphite
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
*Size 11/2 & larger**Size 4 only
CLASS 150 Union Bonnet*, Rising Stem, Soft seated discFlanged ends drilled or undrilled optionally.BRONZE GLOBE VALVE
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassG/F PTFEAramid Fibers Graphite/PTFE Fiber Braid**
CLASS 125Screwed Bonnet, Non-rising Stem
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
BRASS GATE VALVE
Dimensions mm1/4
8mm
inch
35
7050
38377350
42457350
47608755
50709760
60 77118 70
63 86126 80
72104154 90
82115187100
92127205115
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassAramid Fibers Graphite
CLASS 125 BRASS GATE VALVE
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassDezincification Resistant Brass/Bronze*Aramid Fibers Graphite
*Size 3/4 & larger
CLASS 125 BRONZE GATE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.3/8 to 2 Screwed-over-bonnet*Size 21/2 and larger : Bolted bonnet
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
LL1HD
Dimensions mm
mm
inch
42397450
45468050
50619055
57 72105 60
61 78118 70
67 87135 80
74102159 90
90115202115
100130223135
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
121173280155
4100
Nominal Size
LL1HD
Dimensions mm
mm
inch
64113 60
78138 90
90156100
105184115
120187115
145212135
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
Dimensions mm
mm
inch
478655
509760
60117 70
63126 80
72154 90
80164100
90200115
3/4
20427550
1/2
15387550
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
BRONZE GATE VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassBrassAramid Fibers Graphite
CLASS 125 Screwed Bonnet, Non-rising Stem,Threaded ends to BS21 (JIS B0203)
LHD• Threaded end to BS21 (JIS B0203)
Fig. S
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
LHD
valve open
LHD
valve open
Solder
Solder
Solder
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
H
L
D
Dimensions mm
*Shall not be in accordance with JIS B 2240
*21/2 and 3 = AKFS only
mm
inch
82113 60
95138 90
108156100
120184115
140187115
165212135
190244155
220281180
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80270321225
4100
Nominal Size
Dimensions mm
mm
inch
42457350
47608755
50709760
60 77117 70
63 86126 80
72102154 90
80
167100
90
200115
1/2
1538
7350
3/8
10
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
LL1HD
KITZ BRONZE & BRASS VALVES
CLASS 150 Union Bonnet, Rising Stem, Soft seated discThreaded ends to BS21 (JIS B0203)BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. D
• Undrilled unless drilling is specified as an option
Fig. DB
• Drilled according to JIS 10K
Fig. DBH
• Threaded end to BS21 (JIS B0203)
Fig. FH
• Threaded end to ASME B1.20.1
Fig. AKFH
• Solder joint endsto ASME B16.18
Fig. CFH
• Threaded end to BS21 (JIS B0203)
Fig. H
• Threaded end to ASME B1.20.1
Fig. AKH
• Solder joint endsto ASME B16.18
Fig. CH
• Threaded end to BS21 (JIS B0203)
Fig. FR
• Threaded end to ASME B1.20.1
Fig. AKFS
• Solder joint endsto ASME B16.18
Fig. CFS
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassG/F PTFEAramid Fibers Graphite
*Size 11/2 & 2
08 09
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassAramid Fibers Graphite
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
*Size 11/2 & larger**Size 4 only
CLASS 150 Union Bonnet*, Rising Stem, Soft seated discFlanged ends drilled or undrilled optionally.BRONZE GLOBE VALVE
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassG/F PTFEAramid Fibers Graphite/PTFE Fiber Braid**
CLASS 125Screwed Bonnet, Non-rising Stem
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
BRASS GATE VALVE
Dimensions mm1/4
8mm
inch
35
7050
38377350
42457350
47608755
50709760
60 77118 70
63 86126 80
72104154 90
82115187100
92127205115
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBrassBrassDezincification Resistant BrassBrassAramid Fibers Graphite
CLASS 125 BRASS GATE VALVE
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassDezincification Resistant Brass/Bronze*Aramid Fibers Graphite
*Size 3/4 & larger
CLASS 125 BRONZE GATE VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.3/8 to 2 Screwed-over-bonnet*Size 21/2 and larger : Bolted bonnet
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.55 MPa (225 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
LL1HD
Dimensions mm
mm
inch
42397450
45468050
50619055
57 72105 60
61 78118 70
67 87135 80
74102159 90
90115202115
100130223135
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
121173280155
4100
Nominal Size
LL1HD
Dimensions mm
mm
inch
64113 60
78138 90
90156100
105184115
120187115
145212135
1/2
15
3/4
201
2511/4
3211/2
402
50Nominal Size
Dimensions mm
mm
inch
478655
509760
60117 70
63126 80
72154 90
80164100
90200115
3/4
20427550
1/2
15387550
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
BRONZE GATE VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrassDezincification Resistant BrassBrassAramid Fibers Graphite
CLASS 125 Screwed Bonnet, Non-rising Stem,Threaded ends to BS21 (JIS B0203)
LHD• Threaded end to BS21 (JIS B0203)
Fig. S
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
LHD
valve open
LHD
valve open
Solder
Solder
Solder
H
L
D
H
L
H
L
L
S
H
L
D
H
L
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
759655
80111 60
95122 70
110142 80
120165 90
140197100
165225115
190264155
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
230309225
4100
Nominal Size
LHD
KITZ BRONZE & BRASS VALVES
CLASS 150 Screwed Bonnet, Non-rising StemFlanged ends drilled or undrilled optionally.BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
• Drilled according to JIS 10K
Fig. EBH
• Undrilled unless drilling is specified as an option
Fig. EB
• Threaded end to BS21 (JIS B0203)• NBR Disc
Fig. RF
• Threaded end to ASME B1.20.1• FKM Disc
Fig. AKAF
• Solder joint ends to ASME B16.18• FKM Disc
Fig. CAF
• Threaded end to BS21 (JIS B0203)
Fig. R
• Threaded end to ASME B1.20.1
Fig. AKR
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CR
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 21/2 & larger
MaterialsParts
BodyCapDisc
MaterialBronzeBrass/Bronze*Bronze
*Size 21/2 & 3
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBrass/Bronze*
*Size 4 only
10 11
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203) or NPTBRONZE LIFT CHECK VALVE
CLASS 125Screwed Cap, Swing type disc
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.BRONZE SWING CHECK VALVE
Dimensions mm
mm
inch
53612628
59763234
67893941
78974850
84110 54 57
98132 67 70
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR/FKM*
CLASS 150 BRONZE LIFT CHECK VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.72 MPa (250 psi)
LL1S (AKAF)S (RF)
Dimensions mm
mm
inch
535639
606739
708945
80104 52
92120 62
102134 67
122164 79
150193 91
165213102
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
195
119
4100
Nominal Size
LL1H
Dimensions mm
mm
inch
4426
5328
6534
7742
8550
100 56
119 67
139 79
158 91
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
LH
CLASS 150
• Threaded end to ASME B1.20.1
Fig. AKF
• Threaded end to BS21 (JIS B0203)
Fig. F
Screwed Cap, Lift type discThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Dimensions mm
mm
inch
489655
53111 60
62122 70
69141 80
75164 90
86197100
105225115
116261135
1/2
15438650
3/8
10
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD• Threaded end to ASME B1.20.1
Fig. AKE
• Threaded end to BS21 (JIS B0203)
Fig. E
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 21/2 & 3
CLASS 150 BRONZE GATE VALVE Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
Dimensions mm
mm
inch
7049
8058
9571
110 80
128 95
3/4
20125
11/4
3211/2
405440
3/8
105640
1/2
15250
Nominal Size
LH
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
BRONZE Y-PATTERN SWING CHECK VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
CLASS 125 Screwed cap, Swing type disc,Threaded ends to BS21 (JIS B0203)
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21 (JIS B0203)
Fig. YR
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
*AKAF & CAF
Solder
Solder
H
L
D
H
L
H
L
L
S
H
L
D
H
L
Dimensions mm
*Shall not be in accordance with JIS B 2240
mm
inch
759655
80111 60
95122 70
110142 80
120165 90
140197100
165225115
190264155
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80230309225
4100
Nominal Size
LHD
KITZ BRONZE & BRASS VALVES
CLASS 150 Screwed Bonnet, Non-rising StemFlanged ends drilled or undrilled optionally.BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
• Drilled according to JIS 10K
Fig. EBH
• Undrilled unless drilling is specified as an option
Fig. EB
• Threaded end to BS21 (JIS B0203)• NBR Disc
Fig. RF
• Threaded end to ASME B1.20.1• FKM Disc
Fig. AKAF
• Solder joint ends to ASME B16.18• FKM Disc
Fig. CAF
• Threaded end to BS21 (JIS B0203)
Fig. R
• Threaded end to ASME B1.20.1
Fig. AKR
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CR
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 21/2 & larger
MaterialsParts
BodyCapDisc
MaterialBronzeBrass/Bronze*Bronze
*Size 21/2 & 3
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBrass/Bronze*
*Size 4 only
10 11
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203) or NPTBRONZE LIFT CHECK VALVE
CLASS 125Screwed Cap, Swing type disc
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.BRONZE SWING CHECK VALVE
Dimensions mm
mm
inch
53612628
59763234
67893941
78974850
84110 54 57
98132 67 70
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR/FKM*
CLASS 150 BRONZE LIFT CHECK VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
Nominal Size
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.72 MPa (250 psi)
LL1S (AKAF)S (RF)
Dimensions mm
mm
inch
535639
606739
708945
80104 52
92120 62
102134 67
122164 79
150193 91
165213102
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
195
119
4100
Nominal Size
LL1H
Dimensions mm
mm
inch
4426
5328
6534
7742
8550
100 56
119 67
139 79
158 91
3/8
10
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
LH
CLASS 150
• Threaded end to ASME B1.20.1
Fig. AKF
• Threaded end to BS21 (JIS B0203)
Fig. F
Screwed Cap, Lift type discThreaded ends to BS21 (JIS B0203) or NPT,
or solder joint ends.
Dimensions mm
mm
inch
489655
53111 60
62122 70
69141 80
75164 90
86197100
105225115
116261135
1/2
15438650
3/8
10
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
LHD• Threaded end to ASME B1.20.1
Fig. AKE
• Threaded end to BS21 (JIS B0203)
Fig. E
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeAramid Fibers Graphite
*Size 21/2 & 3
CLASS 150 BRONZE GATE VALVE Screwed Bonnet, Non-rising StemThreaded ends to BS21 (JIS B0203) or NPT
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
Dimensions mm
mm
inch
7049
8058
9571
110 80
128 95
3/4
20125
11/4
3211/2
405440
3/8
105640
1/2
15250
Nominal Size
LH
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
BRONZE Y-PATTERN SWING CHECK VALVEW.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
CLASS 125 Screwed cap, Swing type disc,Threaded ends to BS21 (JIS B0203)
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21 (JIS B0203)
Fig. YR
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
*AKAF & CAF
Solder
Solder
H
A60゜
60゜
B
L
H1
D
H
L
B
H
D
H1
L
S
1.41.5
2.42.5
A B
Dimensions mm
mm
inch
80804968
100105 57 83
115125 70105
135145 82124
160170 98149
195210121188
230250148216
240280180267
1/2
1570
4461
3/8
10
3/8 to 221/2 to 3
3/4
20125
11/4
3211/2
40250
21/2
65380
H1
Nominal Size
LL1H
KITZ BRONZE & BRASS VALVES
CLASS 150Y-Pattern body, Screwed cap, 304 stainless steel screen
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
Y-PATTERN STRAINER
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. Y
• Threaded end to ASME B1.20.1
Fig. AKY
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CY
MaterialsParts
BodyBody capScreen
MaterialBronzeBrassType304 Stainless Steel
MaterialsParts
BodyStem
Disc
O-ring
MaterialBrassType 304 stainless steelType 304 stainless steel+ White-NBRNBR
12 13
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
NBR lined disc, Balancing stop hand leverThreaded ends to BS21 (JIS B0203)BRASS BUTTERFLY VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) up to size 2*
W.O.G. non-shock 1.21 MPa (175 psi)
Dimensions mm
mm
inch
474585
514785
585085
67 60110
73 64110
82 70110
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
LHD
CLASS 175
• Threaded end to BS21 (JIS B0203)
Fig. FV
*Contact KITZ for lager sizes
Dimensions mm
mm
inch
484125
585229
626232
707035
808343
90102 50
100116 51
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
HDH1
• Threaded end to BS21 (JIS B0203)and parallel
Fig. FT (Screen)
Threaded end to parallel
Fig. FTS
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203) and parallel
Water 80ºC (0.5 MPa)
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR
5K
• Threaded end to BS21 (JIS B0203)
Fig. VF
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203)
W.O.G. non-shock 120ºC (0.5 MPa)
Dimensions mm
mm
inch
3724
5136
8263
1/2
154430
3/4
20125
6245
11/4
326952
11/2
40250
Nominal Size
LS
MaterialsParts
Body
Cap
Disc
MaterialBronzeBrass (Size 1/2 & 3/4)Bronze (Size 1 to 2)Dezincification Resistant Brass (Size 1/2 & 3/4) Bronze (Size 1 to 2)
5K
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas. Don’t use for Flammable gas or Toxic gas.
Solder
H
A60゜
60゜
B
L
H1
D
H
L
B
H
D
H1
L
S
1.41.5
2.42.5
A B
Dimensions mm
mm
inch
80804968
100105 57 83
115125 70105
135145 82124
160170 98149
195210121188
230250148216
240280180267
1/2
1570
4461
3/8
10
3/8 to 221/2 to 3
3/4
201
2511/4
3211/2
402
5021/2
653
80
H1
Nominal Size
LL1H
KITZ BRONZE & BRASS VALVES
CLASS 150Y-Pattern body, Screwed cap, 304 stainless steel screen
Threaded ends to BS21 (JIS B0203) or NPT,or solder joint ends.
Y-PATTERN STRAINER
KITZ BRONZE & BRASS VALVES
• Threaded end to BS21 (JIS B0203)
Fig. Y
• Threaded end to ASME B1.20.1
Fig. AKY
• Solder joint endsto JIS B2011 /
ASME B16.18 (21/2 & 3)
Fig. CY
MaterialsParts
BodyBody capScreen
MaterialBronzeBrassType304 Stainless Steel
MaterialsParts
BodyStem
Disc
O-ring
MaterialBrassType 304 stainless steelType 304 stainless steel+ White-NBRNBR
12 13
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
NBR lined disc, Balancing stop hand leverThreaded ends to BS21 (JIS B0203)BRASS BUTTERFLY VALVE
KIT
Z S
tan
da
rd
KIT
Z S
tan
da
rd
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) up to size 2*
W.O.G. non-shock 1.21 MPa (175 psi)
Dimensions mm
mm
inch
474585
514785
585085
67 60110
73 64110
82 70110
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
LHD
CLASS 175
• Threaded end to BS21 (JIS B0203)
Fig. FV
*Contact KITZ for lager sizes
Dimensions mm
mm
inch
484125
585229
626232
707035
808343
90102 50
100116 51
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
HDH1
• Threaded end to BS21 (JIS B0203)and parallel
Fig. FT (Screen)
Threaded end to parallel
Fig. FTS
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203) and parallel
Water 80ºC (0.5 MPa)
MaterialsParts
BodyCapDisc
MaterialBronzeBronzeNBR
5K
• Threaded end to BS21 (JIS B0203)
Fig. VF
BRONZE LIFT CHECK VALVE Screwed cap, Lift type discThreaded ends to BS21 (JIS B0203)
W.O.G. non-shock 120ºC (0.5 MPa)
Dimensions mm
mm
inch
3724
5136
8263
1/2
154430
3/4
201
256245
11/4
326952
11/2
402
50Nominal Size
LS
MaterialsParts
Body
Cap
Disc
MaterialBronzeBrass (Size 1/2 & 3/4)Bronze (Size 1 to 2)Dezincification Resistant Brass (Size 1/2 & 3/4) Bronze (Size 1 to 2)
5K
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas. Don’t use for Flammable gas or Toxic gas.
Solder
H
L
D
H
L
D
H
L
D
H
L
H
L
D
H
D
L
• B is undrilled unless drilling is specified as an option.
Dimensions mm
”t” Shall not be in accordance with JIS B 2011 **3/4 & 4 shall not be in accordance with JIS B2011
mm
inch
90153 70 10
100178 80 12
110223 90 12
125254100 14
140302115 14
170376155 16
190436180 16
3/4**
20**125
11/4
3211/2
40250
21/2
65380
220327225 18
4**100**
t*
Nominal Size
L
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-Asbestos Packing
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-Asbestos Packing
Dimensions mm
mm
inch
50126 60
60145 60
65170 70
75213 90
85244100
95294115
115366135
130428155
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-Asbestos Packing
Dimensions mm
*Shall not be in accordance with JIS B 2011
mm
inch
85936010
95122 80 10
110135 90 12
130157100 12
150171115 14
180196135 14
210232155 16
240268180 16
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
280323225 18
4100
t*
Nominal Size
LHD
Dimensions mm
mm
inch
558755
659360
80122 80
90135 90
105157100
120171115
140196135
180232155
200268180
3/8
10508650
1/4
8
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
Dimensions mm
mm
inch
80 51.5
90 58.5
105 67
120 73.5
140 86
180 97
200108
3/4
206543
1/2
1555
38.5
1/4
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LH
KITZ BRONZE & BRASS VALVES
JIS 10K BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
Fig. J
Fig. JB
Fig. M
Fig. LB
Fig. O
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-Asbestos Packing
*Size 1 & larger
14 15
10K BRONZE GLOBE VALVE
JIS 5K BRONZE GATE VALVE
Dimensions mm
mm
inch
55126 60
65153 70
70178 80
80223 90
90254100
100302115
1/2
15
3/4
20125
11/4
3211/2
40120376155
21/2
65250
140436180
380
JIS 10K BRONZE GATE VALVE
10K BRONZE GATE VALVE
JIS 10K BRONZE SWING CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged ends to JIS B2011
Nominal Size
W.O.G –29ºC to +120ºC (Not Freezing) 1.4 MPa, Saturated steam pressure 1.0 MPa (See P.17)
W.O.G –29ºC to +120ºC (Not Freezing) 0.7 MPa, Saturated steam pressure 0.5 MPa (See P.17)
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 1.0 MPa
W.O.G –29ºC to +120ºC (Not Freezing) 1.4 MPa, Saturated steam pressure 1.0 MPa (See P.17)
W.O.G –29ºC to +120ºC (Not Freezing) 1.4 MPa, Saturated steam pressure 1.0 MPa (See P.17)
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7 MPa
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded ends to JIS B0203 (also to BS21)
Screwed Bonnet, Swing type discDesigned to JIS B2011, Threadedends to JIS B0203 (also to BS21)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-Asbestos Packing
*Size 1 & larger
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassBrassBronze
10K
10K
10K
10K
10K
5K
Screwed Bonnet*, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged end to JIS B2011
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Fig. L
HD
*Size 4 : Bolted Bonnet
*Size 3 : Bolted Bonnet
*Size 3 & larger : Bolted Bonnet
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
LHD
valve open
valve open
valve open
LHD
valve open
valve open
H
L
D
H
L
D
H
L
D
H
L
H
L
D
H
D
L
• B is undrilled unless drilling is specified as an option.
Dimensions mm
”t” Shall not be in accordance with JIS B 2011 **3/4 & 4 shall not be in accordance with JIS B2011
mm
inch
90153 70 10
100178 80 12
110223 90 12
125254100 14
140302115 14
170376155 16
190436180 16
3/4**
20**125
11/4
3211/2
40250
21/2
65380
220327225 18
4**100**
t*
Nominal Size
L
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-Asbestos Packing
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-Asbestos Packing
Dimensions mm
mm
inch
50126 60
60145 60
65170 70
75213 90
85244100
95294115
115366135
130428155
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
LHD
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeDezincification Resistant BrassBronzeNon-Asbestos Packing
Dimensions mm
*Shall not be in accordance with JIS B 2011
mm
inch
85936010
95122 80 10
110135 90 12
130157100 12
150171115 14
180196135 14
210232155 16
240268180 16
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80280323225 18
4100
t*
Nominal Size
LHD
Dimensions mm
mm
inch
558755
659360
80122 80
90135 90
105157100
120171115
140196135
180232155
200268180
3/8
10508650
1/4
8
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80Nominal Size
Dimensions mm
mm
inch
80 51.5
90 58.5
105 67
120 73.5
140 86
180 97
200108
3/4
206543
1/2
1555
38.5
1/4
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LH
KITZ BRONZE & BRASS VALVES
JIS 10K BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
Fig. J
Fig. JB
Fig. M
Fig. LB
Fig. O
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-Asbestos Packing
*Size 1 & larger
14 15
10K BRONZE GLOBE VALVE
JIS 5K BRONZE GATE VALVE
Dimensions mm
mm
inch
55126 60
65153 70
70178 80
80223 90
90254100
100302115
1/2
15
3/4
20125
11/4
3211/2
40120376155
21/2
65250
140436180
380
JIS 10K BRONZE GATE VALVE
10K BRONZE GATE VALVE
JIS 10K BRONZE SWING CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged ends to JIS B2011
Nominal Size
W.O.G –29ºC to +120ºC (Not Freezing) 1.4 MPa, Saturated steam pressure 1.0 MPa (See P.17)
W.O.G –29ºC to +120ºC (Not Freezing) 0.7 MPa, Saturated steam pressure 0.5 MPa (See P.17)
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 1.0 MPa
W.O.G –29ºC to +120ºC (Not Freezing) 1.4 MPa, Saturated steam pressure 1.0 MPa (See P.17)
W.O.G –29ºC to +120ºC (Not Freezing) 1.4 MPa, Saturated steam pressure 1.0 MPa (See P.17)
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7 MPa
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded ends to JIS B0203 (also to BS21)
Screwed Bonnet, Swing type discDesigned to JIS B2011, Threadedends to JIS B0203 (also to BS21)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*Dezincification Resistant BrassBronzeNon-Asbestos Packing
*Size 1 & larger
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassBrassBronze
10K
10K
10K
10K
10K
5K
Screwed Bonnet*, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Screwed Bonnet*, Rising Stem,Designed to JIS B2011
Flanged end to JIS B2011
Screwed Bonnet, Rising StemDesigned to JIS B2011
Threaded end to JIS B0203 (also to BS21)
Fig. L
HD
*Size 4 : Bolted Bonnet
*Size 3 : Bolted Bonnet
*Size 3 & larger : Bolted Bonnet
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
LHD
valve open
valve open
valve open
LHD
valve open
valve open
H
L
F
H
D
L
Dimensions mm
mm
inch
56139101
56146121
59152131
66165156
72183187
78208217
96237267187
109289330231
250
5413286
4021/211/2
65380
145316375256
4100
5125
6150
8200
10250
12300
Nominal Size
LHDF
Dimensions mm
”t” Shall not be in accordance with JIS B2240
mm
inch
854310
955210
110 59 12
130 67 12
150 74 14
180 86 14
210 97 16
240108 16
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
280127 18
4100
t*
Nominal Size
LH
KITZ BRONZE & BRASS VALVES
Screwed Bonnet,Swing type disc,
Flanged end to JIS B224010K BRONZE SWING CHECK VALVE
KITZ BRONZE & BRASS VALVES
Fig. OB
• With by-pass
Fig. 10BWZ
MaterialsParts
BodyBonnetHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBronze
*Size 4 only
MaterialsParts
BodyBonnetStemDisc ADisc B
MaterialBronze + NBRBrassDezincification Resistant BrassBronzeDezincification Resistant Brass
16 17
10K
10K
Double plateWafer connection JIS 10KBRONZE WAFER TYPE CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, Oil, Gas 80ºC (1.4 MPa)
Don’t use for Flammable gas or Toxic gas.
Technical Data Pressure and temperature rating of JIS standard bronze valves.
5K
10K
■Nominal pressure 5K
Nominal pressure
■Nominal pressure 10K
1. Fluid Water, oil, gas, air and steam. However, combustible gas and toxic gas are excluded.
2. The relationship between the temperature of fluid and the maximum permissible pressure (hereinafter, referred to as the “pressure-temperature criteria”) shall be in accordance with table 1. However, the fluid shall not be frozen.
3. In the case where the use is prohibited or restricted by the High Pressure Gas Safety Act and other regulations, the user shall use the valves within the range of laws and ordinances.
Notes a) It shall be the maximum service temperature, and in the case of gate valve, it shall be 134°C.b) It shall be the maximum service temperature, and in the case of gate valve, it shall be 171°C.c) The maximum permissible pressure at the intermediate temperature between over 120°C and
the maximum service temperature shall be obtained by proportional interpolation.
Gate valve
Gate valve
Table 1 Pressure-temperature criteria
0.7
0.5
1.4
1.0
–29 to 120
159 a)
–29 to 120
185 b)
Temperature of fluid °C
Maximum permissible working pressure c)
MPa
0.7MPa
1.4MPa
1.0MPa
0.5MPa
–29°C 0°C 100°C 134°C 159°C
–29°C 0°C 100°C 171°C 185°C
H
L
F
H
D
L
Dimensions mm
mm
inch
56139101
56146121
59152131
66165156
72183187
78208217
96237267187
109289330231
250
5413286
4021/211/2
653
80145316375256
4100
5125
6150
8200
10250
12300
Nominal Size
LHDF
Dimensions mm
”t” Shall not be in accordance with JIS B2240
mm
inch
854310
955210
110 59 12
130 67 12
150 74 14
180 86 14
210 97 16
240108 16
1/2
15
3/4
201
2511/4
3211/2
402
5021/2
653
80280127 18
4100
t*
Nominal Size
LH
KITZ BRONZE & BRASS VALVES
Screwed Bonnet,Swing type disc,
Flanged end to JIS B224010K BRONZE SWING CHECK VALVE
KITZ BRONZE & BRASS VALVES
Fig. OB
• With by-pass
Fig. 10BWZ
MaterialsParts
BodyBonnetHinge pinDisc
MaterialBronzeBrass/Bronze*BrassBronze
*Size 4 only
MaterialsParts
BodyBonnetStemDisc ADisc B
MaterialBronze + NBRBrassDezincification Resistant BrassBronzeDezincification Resistant Brass
16 17
10K
10K
Double plateWafer connection JIS 10KBRONZE WAFER TYPE CHECK VALVE
JIS
Sta
nd
ard
JIS S
tan
da
rd
Water, non-shock 120ºC (1.4 MPa), Oil & water 120ºC (1.0 MPa), Saturated steam pressure 0.7MPa
Water, Oil, Gas 80ºC (1.4 MPa)
Don’t use for Flammable gas or Toxic gas.
Technical Data Pressure and temperature rating of JIS standard bronze valves.
5K
10K
■Nominal pressure 5K
Nominal pressure
■Nominal pressure 10K
1. Fluid Water, oil, gas, air and steam. However, combustible gas and toxic gas are excluded.
2. The relationship between the temperature of fluid and the maximum permissible pressure (hereinafter, referred to as the “pressure-temperature criteria”) shall be in accordance with table 1. However, the fluid shall not be frozen.
3. In the case where the use is prohibited or restricted by the High Pressure Gas Safety Act and other regulations, the user shall use the valves within the range of laws and ordinances.
Notes a) It shall be the maximum service temperature, and in the case of gate valve, it shall be 134°C.b) It shall be the maximum service temperature, and in the case of gate valve, it shall be 171°C.c) The maximum permissible pressure at the intermediate temperature between over 120°C and
the maximum service temperature shall be obtained by proportional interpolation.
Gate valve
Gate valve
Table 1 Pressure-temperature criteria
0.7
0.5
1.4
1.0
–29 to 120
159 a)
–29 to 120
185 b)
Temperature of fluid °C
Maximum permissible working pressure c)
MPa
0.7MPa
1.4MPa
1.0MPa
0.5MPa
–29°C 0°C 100°C 134°C 159°C
–29°C 0°C 100°C 171°C 185°C
H
L
D
H
L
D
D
H
L
D
H
L
H
L
D
H
L
D
Dimensions mm
mm
inch
51149 70
56173 80
66194 80
74228100
84274115
98313135
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
LHD
46125 60
3/8
10
Dimensions mm
mm
inch
56 64157 70
66 76180 70
68 82216 80
74 86257 90
84109297100
3/4
20125
11/4
3211/2
40 51 49137 55
1/2
15 46
108 50
3/8
15 45
108 50
1/4
15250
Nominal Size
LL1HD
Dimensions mm
mm
inch
56 64155 60
66 76180 70
68 82216 80
74 86257 90
84109296100
115
371135
130
432155
3/4
20 51 49129 55
1/2
15125
11/4
3211/2
40250
21/2
65380
D
Nominal Size
LL1H
Dimensions
mm
inch
D
Nominal Size
LL1H
Dimensions mm
mm
inch
56 64157 70
66 76180 70
68 82216 80
74 86257 90
84109296100
120
385155
140
432155
3/4
20125
11/4
3211/2
40 51 49137 55
1/2
15250
21/2
65380
Nominal Size
LL1HD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeBronze
Flexible Graphite& Aluminum
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeCopper-Nickel Alloy
Flexible Graphite& Aluminum
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
Dimensions mm
mm
inch
499855
53114 70
61126 70
68145 80
74176 90
84201100
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
LHD
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
KITZ BRONZE & BRASS VALVES
BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
18 19
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
Ind
ust
ria
l Ind
ustria
l
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT
Screwed Bonnet, Non-rising Stem, Designed to MSS SP-80 Type 1A
Threaded ends to NPT
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 6.89 MPa (1000 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
CLASS 150
CLASS 150
CLASS 300
CLASS 125
CLASS 150
• Threaded end toASME B1.20.1
Fig. AK125M• Solder joint end to
ASME B16.18
Fig. C125M• Threaded end to
ASME B1.20.1
Fig. AK150L• Solder joint end to
ASME B16.18
Fig. C150L
• Threaded end toASME B1.20.1
Fig. AK150LU• Solder joint end to
ASME B16.18
Fig. C150LU
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK150E• Threaded end to ASME B1.20.1
Fig. AK300LU438650
3/8
10
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125E• Solder joint end to
ASME B16.18
Fig. C125E
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
BRONZE GATE VALVEScrewed Bonnet, Non-rising Stem,
Designed to MSS SP-80 Type 1AThreaded ends to NPT or solder joint ends.
49469355
53 60110 60
61 71126 70
64 79145 80
68 88170 90
74108189100
1/2
15
3/4
20125
11/4
3211/2
40250
43398650
3/8
10
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas. Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
valve open
valve open
valve open
valve open
Solder
Solder
Solder
Solder
H
L
D
H
L
D
D
H
L
D
H
L
H
L
D
H
L
D
Dimensions mm
mm
inch
51149 70
56173 80
66194 80
74228100
84274115
98313135
1/2
15
3/4
20125
11/4
3211/2
40250
Nominal Size
LHD
46125 60
3/8
10
Dimensions mm
mm
inch
56 64157 70
66 76180 70
68 82216 80
74 86257 90
84109297100
3/4
20125
11/4
3211/2
40 51 49137 55
1/2
15 46
108 50
3/8
15 45
108 50
1/4
15250
Nominal Size
LL1HD
Dimensions mm
mm
inch
56 64155 60
66 76180 70
68 82216 80
74 86257 90
84109296100
115
371135
130
432155
3/4
20 51 49129 55
1/2
151
2511/4
3211/2
402
5021/2
653
80
D
Nominal Size
LL1H
Dimensions
mm
inch
D
Nominal Size
LL1H
Dimensions mm
mm
inch
56 64157 70
66 76180 70
68 82216 80
74 86257 90
84109296100
120
385155
140
432155
3/4
20125
11/4
3211/2
40 51 49137 55
1/2
15250
21/2
65380
Nominal Size
LL1HD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeBronze
Flexible Graphite& Aluminum
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeCopper-Nickel Alloy
Flexible Graphite& Aluminum
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
Dimensions mm
mm
inch
499855
53114 70
61126 70
68145 80
74176 90
84201100
1/2
15
3/4
201
2511/4
3211/2
402
50Nominal Size
LHD
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
KITZ BRONZE & BRASS VALVES
BRONZE GATE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
18 19
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
BRONZE GATE VALVE
Ind
ust
ria
l Ind
ustria
l
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT
Screwed Bonnet, Non-rising Stem, Designed to MSS SP-80 Type 1A
Threaded ends to NPT
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 6.89 MPa (1000 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
CLASS 150
CLASS 150
CLASS 300
CLASS 125
CLASS 150
• Threaded end toASME B1.20.1
Fig. AK125M• Solder joint end to
ASME B16.18
Fig. C125M• Threaded end to
ASME B1.20.1
Fig. AK150L• Solder joint end to
ASME B16.18
Fig. C150L
• Threaded end toASME B1.20.1
Fig. AK150LU• Solder joint end to
ASME B16.18
Fig. C150LU
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded ends to NPT or solder joint ends.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeAramid Fibers Graphite
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK150E• Threaded end to ASME B1.20.1
Fig. AK300LU438650
3/8
10
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125E• Solder joint end to
ASME B16.18
Fig. C125E
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
BRONZE GATE VALVEScrewed Bonnet, Non-rising Stem,
Designed to MSS SP-80 Type 1AThreaded ends to NPT or solder joint ends.
49469355
53 60110 60
61 71126 70
64 79145 80
68 88170 90
74108189100
1/2
15
3/4
201
2511/4
3211/2
402
5043398650
3/8
10
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas. Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
valve open
valve open
valve open
valve open
Solder
Solder
Solder
Solder
H
L
D
H
L
D
H
L
H
L
H
L
D
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
Dimensions mm
mm
inch
70864947
80105 58 56
95121 71 69
110137 80 77
128170 95 92
156194114111
184222131127
3/4
20125
11/4
3211/2
4056674038
1/2
15250
21/2
65380
Nominal Size
LL1HH1
Dimensions mm
mm
inch
65849870
77100108 80
85115137 90
100130160100
119155180115
150192202135
178232246155
3/4
20125
11/4
3211/2
4053647660
1/2
15250
21/2
65380
Nominal Size
LL1HD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeG/F PTFE
Flexible Graphite& Aluminum
Dimensions mm
mm
inch
78 95136 90
90112149100
105126173115
120145182115
145180209135
170205247155
200244275180
3/4
20 55 61109 60
3/8
10 64 72116 70
1/2
15 53 58109 60
1/4
8125
11/4
3211/2
40250
21/2
65380
245312298225
4100
D
Nominal Size
LL1H
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
KITZ BRONZE & BRASS VALVES
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeG/F PTFEAramid Fibers Graphite PTFE Braided Packing**
20 21
BRONZE GLOBE VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
Ind
ust
ria
l Ind
ustria
l
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*BronzeBronzeAramid Fibers Graphite
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeFlexible Graphite & Aluminum
CLASS 150
CLASS 150
CLASS 300
CLASS 125
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT
Union Bonnet*, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT or solder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK300D
• Threaded end to ASME B1.20.1
Fig. AK300J
Dimensions mm
mm
inch
55113 60
64126 80
78139 90
90157100
105187115
120192135
145221155
1/2
15
3/4
20
3/8
10 53113 60
1/4
8125
11/4
3211/2
40250
Nominal Size
Dimensions mm
mm
inch
55113 60
64126 80
78139 90
90159100
105187115
120195135
145224155
1/2
15
3/4
20
3/8
10 53113 60
1/4
8125
11/4
3211/2
40250
Nominal Size
• Threaded end to ASME B1.20.1
Fig. AKYR• Solder joint end to
ASME B16.18
Fig. CYR• Threaded end to
ASME B1.20.1
Fig. AK150D• Solder joint end to
ASME B16.18
Fig. C150D
• Threaded end toASME B1.20.1
Fig. AK150YR• Solder joint end to
ASME B16.18
Fig. C150YR
Dimensions mm
mm
inch
728649
84105 58
99121 70
113137 79
131170 95
162194114
186222132
3/4
20606739
1/2
15546139
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LL1H
*Size 21/2 and larger = Bolted bonnet
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125C• Solder joint end to
ASME B16.18
Fig. C125C
CLASS 300
BRONZE GLOBE VALVE
BRONZE GLOBE VALVE
*Size 21/2 & 3
**Size 3 & 4
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
LHD
valve open
valve open
valve open
LHD
valve open
Solder
Solder Solder
Solder
Solder
D
H
L
H
L
D
H
L
D
H
L
H
L
H
L
D
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
Dimensions mm
mm
inch
70864947
80105 58 56
95121 71 69
110137 80 77
128170 95 92
156194114111
184222131127
3/4
20125
11/4
3211/2
4056674038
1/2
15250
21/2
65380
Nominal Size
LL1HH1
Dimensions mm
mm
inch
65849870
77100108 80
85115137 90
100130160100
119155180115
150192202135
178232246155
3/4
201
2511/4
3211/2
4053647660
1/2
152
5021/2
653
80Nominal Size
LL1HD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeG/F PTFE
Flexible Graphite& Aluminum
Dimensions mm
mm
inch
78 95136 90
90112149100
105126173115
120145182115
145180209135
170205247155
200244275180
3/4
20 55 61109 60
3/8
10 64 72116 70
1/2
15 53 58109 60
1/4
81
2511/4
3211/2
402
5021/2
653
80245312298225
4100
D
Nominal Size
LL1H
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBrassCopperBronze
KITZ BRONZE & BRASS VALVES
BRONZE GLOBE VALVE
KITZ BRONZE & BRASS VALVES
MaterialsParts
BodyBonnetStemDisc
Gland Packing
MaterialBronzeBronzeBronzeG/F PTFEAramid Fibers Graphite PTFE Braided Packing**
20 21
BRONZE GLOBE VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
BRONZE Y-PATTERN SWING CHECK VALVE
Ind
ust
ria
l Ind
ustria
l
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi) W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 2.07 MPa (300 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBrass/Bronze*BronzeBronzeAramid Fibers Graphite
MaterialsParts
BodyBonnetStemDiscGland Packing
MaterialBronzeBronzeBronzeBronzeFlexible Graphite & Aluminum
CLASS 150
CLASS 150
CLASS 300
CLASS 125
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT
Union Bonnet*, Rising Stem, Designed to MSS SP-80 Type 2Threaded end to NPT or solder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT orsolder joint ends.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to ASME B1.20.1
Fig. AK300D
• Threaded end to ASME B1.20.1
Fig. AK300J
Dimensions mm
mm
inch
55113 60
64126 80
78139 90
90157100
105187115
120192135
145221155
1/2
15
3/4
20
3/8
10 53113 60
1/4
8125
11/4
3211/2
40250
Nominal Size
Dimensions mm
mm
inch
55113 60
64126 80
78139 90
90159100
105187115
120195135
145224155
1/2
15
3/4
20
3/8
10 53113 60
1/4
81
2511/4
3211/2
402
50Nominal Size
• Threaded end to ASME B1.20.1
Fig. AKYR• Solder joint end to
ASME B16.18
Fig. CYR• Threaded end to
ASME B1.20.1
Fig. AK150D• Solder joint end to
ASME B16.18
Fig. C150D
• Threaded end toASME B1.20.1
Fig. AK150YR• Solder joint end to
ASME B16.18
Fig. C150YR
Dimensions mm
mm
inch
728649
84105 58
99121 70
113137 79
131170 95
162194114
186222132
3/4
20606739
1/2
15546139
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LL1H
*Size 21/2 and larger = Bolted bonnet
CLASS 125
• Threaded end toASME B1.20.1
Fig. AK125C• Solder joint end to
ASME B16.18
Fig. C125C
CLASS 300
BRONZE GLOBE VALVE
BRONZE GLOBE VALVE
*Size 21/2 & 3
**Size 3 & 4
Screwed Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT or solder joint ends.
Union Bonnet, Rising Stem, Designed to MSS SP-80 Type 1Threaded ends to NPT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
W.O.G. non-shock 1.38 MPa (200 psi), Saturated steam pressure 0.86 MPa (125 psi)
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
Don’t use for Flammable gas or Toxic gas.
LHD
valve open
valve open
valve open
LHD
valve open
Solder
Solder Solder
Solder
Solder
D
H
L
H
L
H
L
D
H
D
L
D
H
L
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBronzeCopperBronze
Dimensions mm
mm
inchNominal Size
LHD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
Material AS DesignationBrassBrassBrassBrassAramid Fibers Graphite
AS 2345AS 2345AS 2345AS 2345Asbestos FreePacking
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
22 23
BRONZE Y-PATTERN SWING CHECK VALVE
BRASS GATE VALVE AS 1628
Ind
ust
ria
l Ind
ustria
l
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT
Screwed Bonnet, Non-rising Stem,Designed to AS 1628-2001
Threaded ends to AS 1722.1
Working temperature and pressure, non-shock 99ºC /1.6 MPa
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
CLASS 300
PN16
• Australian Standard AS 1628 Lic No WMKA02054
Fig. AS-FH
• Solder joint end to ASME B1.20.1
Fig. AK300YR
Dimensions mm
mm
inchNominal Size
LH
6042
7251
8461
9974
113 83
131 98
1/2
15
3/4
20125
11/4
3211/2
40250
557455
608655
689460
78116 70
81128 80
94158 90
1/2
15
3/4
20125
11/4
3211/2
40250
Don’t use for Flammable gas or Toxic gas.
Dimensions mm
mm
inch
73 51100
88 59130
100 64130
115 73150
140 80150
163108200
187122300
3/4
20544282
1/2
15463982
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFENBR, FKM: CTFLL only
Dimensions mm
mm
inch
60 73 47100
72 88 55130
82100 59130
92115 67150
105140 75150
3/4
20125
11/4
3211/2
4053543982
1/2
1542
3582
3/8
1041
3582
1/4
8250
Nominal Size
LL1HD
BRASS BALL VALVE, FULL PORT
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass (TEA Plating)PTFEPTFE
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)Maximum pressure temperature limitation: 150 psi at 300ºF
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant Brass
PTFEPTFE
TYPE 600
TYPE 600
TYPE 600
Screwed body cap, Blowout-proof StemSolder joint ends to ASME B16.18
Screwed body cap, Blowout-proof StemThreaded ends to ASME B1.20.1
Screwed body cap, Blowout-proof stem.Double O-ring stem seals
Threaded ends to NPT or solder joint ends.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Dimensions mm
mm
inch
423982
534282
60 51100
72 59130
82 64130
92 73150
105 80150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
• Threaded end toASME B1.20.1
Fig. AKTFLL• Solder joint end to
ASME B16.18
Fig. CTFLL
Fig. AKTAF
*Size 21/2 & 3
• Threaded end to ASME B1.20.1
Fig. CTAF• Solder joint end to ASME B16.18
Approvals(up to 2)
UL
AKTFLL only
FM
Approvals(up to 2)
Approvals(up to 2)
CSA (US/C)NSF/ANSI61-8 UL FM
NSF/ANSI61-8
CSA (US/C)
Brass: TEA Plating (Size 3/8 to 2)Brass: Nickel-Chrome Plating (Size 21/2 & 3)
Solder
H
D
L
H
L
H
L
D
H
D
L
D
H
L
MaterialsParts
BodyCapHinge pinDisc
MaterialBronzeBronzeCopperBronze
Dimensions mm
mm
inchNominal Size
LHD
MaterialsParts
BodyBonnetStemDisc
Gland Packing
Material AS DesignationBrassBrassBrassBrassAramid Fibers Graphite
AS 2345AS 2345AS 2345AS 2345Asbestos FreePacking
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
22 23
BRONZE Y-PATTERN SWING CHECK VALVE
BRASS GATE VALVE AS 1628
Ind
ust
ria
l Ind
ustria
l
Screwed cap, Swing type disc,Designed to MSS SP-80 Type 3
Threaded ends to NPT
Screwed Bonnet, Non-rising Stem,Designed to AS 1628-2001
Threaded ends to AS 1722.1
Working temperature and pressure, non-shock 99ºC /1.6 MPa
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 2.07 MPa (300 psi)
CLASS 300
PN16
• Australian Standard AS 1628 Lic No WMKA02054
Fig. AS-FH
• Solder joint end to ASME B1.20.1
Fig. AK300YR
Dimensions mm
mm
inchNominal Size
LH
6042
7251
8461
9974
113 83
131 98
1/2
15
3/4
201
2511/4
3211/2
402
50
557455
608655
689460
78116 70
81128 80
94158 90
1/2
15
3/4
201
2511/4
3211/2
402
50
Don’t use for Flammable gas or Toxic gas.
Dimensions mm
mm
inch
73 51100
88 59130
100 64130
115 73150
140 80150
163108200
187122300
3/4
20544282
1/2
15463982
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFENBR, FKM: CTFLL only
Dimensions mm
mm
inch
60 73 47100
72 88 55130
82100 59130
92115 67150
105140 75150
3/4
20125
11/4
3211/2
4053543982
1/2
1542
3582
3/8
1041
3582
1/4
8250
Nominal Size
LL1HD
BRASS BALL VALVE, FULL PORT
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass (TEA Plating)PTFEPTFE
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)Maximum pressure temperature limitation: 150 psi at 300ºF
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant Brass
PTFEPTFE
TYPE 600
TYPE 600
TYPE 600
Screwed body cap, Blowout-proof StemSolder joint ends to ASME B16.18
Screwed body cap, Blowout-proof StemThreaded ends to ASME B1.20.1
Screwed body cap, Blowout-proof stem.Double O-ring stem seals
Threaded ends to NPT or solder joint ends.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Dimensions mm
mm
inch
423982
534282
60 51100
72 59130
82 64130
92 73150
105 80150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
• Threaded end toASME B1.20.1
Fig. AKTFLL• Solder joint end to
ASME B16.18
Fig. CTFLL
Fig. AKTAF
*Size 21/2 & 3
• Threaded end to ASME B1.20.1
Fig. CTAF• Solder joint end to ASME B16.18
Approvals(up to 2)
UL
AKTFLL only
FM
Approvals(up to 2)
Approvals(up to 2)
CSA (US/C)NSF/ANSI61-8 UL FM
NSF/ANSI61-8
CSA (US/C)
Brass: TEA Plating (Size 3/8 to 2)Brass: Nickel-Chrome Plating (Size 21/2 & 3)
Solder
H
D
L
Mounting PadUp to size 2
Mounting PadSize 21/2 and larger
D
H
L
D
H
L
Mounting PadUp to size 2
Mounting PadSize 21/2and larger
H
D
L
d3
H
D
L
D
H
L
Dimensions mm
mm
inch
423982
534282
60 51100
72 59130
82 64130
92 73150
105 80150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40135108200
21/2
65250
156122300
380
192140300
4100
Nominal Size
LHD
Dimensions mm
mm
inch
423982
534282
60 51100
72 59130
82 64130
92 73150
105 80150
1/2
15
3/4
20
3/8
10413982
1/4
8125
11/4
3211/2
40135108200
21/2
65250
156122300
380
192140300
4100
Nominal Size
LHD
Dimensions mm
mm
inch
42463982
53544282
60 73 51100
72 88 59130
82100 64130
92115 73150
105140 80150
1/2
15
3/4
20
3/8
1041
3982
1/4
8125
11/4
3211/2
40250
Nominal Size
LL1HD
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Stainless Steel (Type 316)Stainless Steel(Type 316 or Gr. CF8M)Reinforced PTFEReinforced PTFE
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrassBrassStainless Steel (Type 316)Stainless Steel (Type 316 or Gr. CF8M)PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass: NIckel-Chrome PlatingPTFEPTFE
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
24 25
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.72 MPa (250 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600250 WSP Steam trim, Mounting pad
Screwed body cap, Blowout-proof stem.Threaded ends to ASME B1.20.1
• Threaded end toASME B1.20.1
Fig. AKTAFM• Solder joint end to
ASME B16.18
Fig. CTAFM
Stainless steel trimScrewed body cap, Blowout-proof Stem
Threaded ends to NPT or solder joint ends.
Mounting padScrewed body cap, Blowout-proof Stem
Threaded ends to ASME B1.20.1
Fig. AKTAFP• Threaded end to ASME B1.20.1
Fig. AKTAFPM• Threaded end to ASME B1.20.1
*Size 21/2 and larger
*Size 21/2 and larger
Approvals(up to 2)
Approvals
UL
*AKTAFM only
(up to 2)
Approvals
UL(up to 2)
UL
*
NSF/ANSI61-8
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CSA (US/C)
*
Dimensions mm
mm
inch
74754282
3/4-11.5 NHR
84 90 51100
3/4-11.5 NHR
1/2
15
3/4
20Nominal Size
LL1HDd3
Dimensions mm
mm
inch
55544282
62 73 51100
73 88 59130
1/2
15
3/4
20125
Nominal Size
LL1HD
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600
Drainable, Screwed body cap,Blowout-proof Stem, Drain portThreaded ends to ASME B1.20.1
Threaded end 3/4 Hose connectionwith cap & chain, Blowout-proof stem,
Threaded/Hose connection(ASME B1.20.1/ASME B1.20.7 3/4 11.5NHR)
Screwed body cap,Blowout-proof Stem, Male & Female,
Threaded ends to ASME B1.20.1
Dimensions mm
mm
inch
533982
664282
73 51100
88 59130
1/2
15
3/4
20
3/8
10523982
1/4
8125
Nominal Size
LHD
Fig. AKTAFO• Threaded end to ASME B1.20.1
• Threaded end toASME B1.20.1
Fig. AKTAFC• Solder joint end to
ASME B16.18
Fig. CTAFC
• Threaded end toASME B1.20.1
Fig. AKTAFD• Solder joint end to
ASME B16.18
Fig. CTAFDSolder Solder
Solder
L
D
H
Mounting PadUp to size 2
Mounting PadSize 21/2 and larger
D
H
L
D
H
L
Mounting PadUp to size 2
Mounting PadSize 21/2and larger
H
D
L
d3
H
D
L
D
H
L
Dimensions mm
mm
inch
423982
534282
60 51100
72 59130
82 64130
92 73150
105 80150
1/2
15
3/4
20
3/8
10413982
1/4
81
2511/4
3211/2
40135108200
21/2
652
50156122300
380
192140300
4100
Nominal Size
LHD
Dimensions mm
mm
inch
423982
534282
60 51100
72 59130
82 64130
92 73150
105 80150
1/2
15
3/4
20
3/8
10413982
1/4
81
2511/4
3211/2
40135108200
21/2
652
50156122300
380
192140300
4100
Nominal Size
LHD
Dimensions mm
mm
inch
42463982
53544282
60 73 51100
72 88 59130
82100 64130
92115 73150
105140 80150
1/2
15
3/4
20
3/8
1041
3982
1/4
81
2511/4
3211/2
402
50Nominal Size
LL1HD
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Stainless Steel (Type 316)Stainless Steel(Type 316 or Gr. CF8M)Reinforced PTFEReinforced PTFE
MaterialsParts
BodyBody capStem
Ball
Ball seatGland Packing
MaterialBrassBrassStainless Steel (Type 316)Stainless Steel (Type 316 or Gr. CF8M)PTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass: NIckel-Chrome PlatingPTFEPTFE
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
24 25
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.72 MPa (250 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600250 WSP Steam trim, Mounting pad
Screwed body cap, Blowout-proof stem.Threaded ends to ASME B1.20.1
• Threaded end toASME B1.20.1
Fig. AKTAFM• Solder joint end to
ASME B16.18
Fig. CTAFM
Stainless steel trimScrewed body cap, Blowout-proof Stem
Threaded ends to NPT or solder joint ends.
Mounting padScrewed body cap, Blowout-proof Stem
Threaded ends to ASME B1.20.1
Fig. AKTAFP• Threaded end to ASME B1.20.1
Fig. AKTAFPM• Threaded end to ASME B1.20.1
*Size 21/2 and larger
*Size 21/2 and larger
Approvals(up to 2)
Approvals
UL
*AKTAFM only
(up to 2)
Approvals
UL(up to 2)
UL
*
NSF/ANSI61-8
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
CSA (US/C)
*
Dimensions mm
mm
inch
74754282
3/4-11.5 NHR
84 90 51100
3/4-11.5 NHR
1/2
15
3/4
20Nominal Size
LL1HDd3
Dimensions mm
mm
inch
55544282
62 73 51100
73 88 59130
1/2
15
3/4
20125
Nominal Size
LL1HD
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600
Drainable, Screwed body cap,Blowout-proof Stem, Drain portThreaded ends to ASME B1.20.1
Threaded end 3/4 Hose connectionwith cap & chain, Blowout-proof stem,
Threaded/Hose connection(ASME B1.20.1/ASME B1.20.7 3/4 11.5NHR)
Screwed body cap,Blowout-proof Stem, Male & Female,
Threaded ends to ASME B1.20.1
Dimensions mm
mm
inch
533982
664282
73 51100
88 59130
1/2
15
3/4
20
3/8
10523982
1/4
8125
Nominal Size
LHD
Fig. AKTAFO• Threaded end to ASME B1.20.1
• Threaded end toASME B1.20.1
Fig. AKTAFC• Solder joint end to
ASME B16.18
Fig. CTAFC
• Threaded end toASME B1.20.1
Fig. AKTAFD• Solder joint end to
ASME B16.18
Fig. CTAFDSolder Solder
Solder
L
D
H
D
H
L
D
H
LE
H
D
L
H
L
D
H H1
D D1
L L
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
Dimensions mm
mm
inch
523982
634282
75 51100
88 59130
98 64130
113 73150
126 80150
1/2
15
3/4
20
3/8
10523982
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
Dimensions mm
mm
inch
4239 482
5342 482
60 51 4100
72 59 4130
82 64 4130
92 73 4150
105 80 4150
1/2
15
3/4
20
3/8
104139 482
1/4
8125
11/4
3211/2
40250
Nominal Size
LHED
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
26 27
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
Safety exhaust, Screwed body cap,Blowout-proof stem, Latch lock handle
Threaded ends to ASME B1.20.1
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), –18ºC to + 93ºC (Not Freezing)
TYPE 600
TYPE 200
Single union, Screwed body cap,Blowout-proof Stem,
Threaded ends to ASME B1.20.1
● Exhaust hole diameter : 4mm (all nominal size)
Fig. AKTAFU• Threaded end to ASME B1.20.1
Fig. AKTAFS• Threaded end to ASME B1.20.1
Dimensions mm
mm
inchNominal Size
LHD
744580
805080
94 55110
1/2
15604560
3/8
10594560
1/4
8
3/4
20125
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions mm
mm
inch
6850488080
79 55 55110 90
86 60 61110105
96 65 66110105
109 75 80140120
127 91
200
153105
300
3/4
205045416065
3/8
106545448080
1/2
155045416065
1/4
8125
11/4
3211/2
40250
21/2
65380
179124
400
4100
D1
Nominal Size
LHH1D
*TT: 1/4 to 2
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 4 only**Nickel-chrome plated
*Nickel-Chrome Plated
Dimensions mm
mm
inch
63734880
3/4
2045474160
3/8
1056544580
1/2
1544474160
1/4
8 74 88 54110
125
82 98 58110
11/4
32 91113 63110
11/2
40104135 74140
250
–147 89200
21/2
65–
177103300
380
D
Nominal Size
LL1H
BRASS BALL VALVE
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
BRASS BALL VALVE
BRASS BALL VALVE
CTH W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)TH W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 400/600
TYPE 400
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or solder joint ends.
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21
Fig. TO
• Threaded end to BS21
Fig. TH• Solder joint end to
ASME B16.18
Fig. CTH
• Threaded end to BS21
Fig. T
• Threaded end to ASME B1.20.1
Fig. AKT
• Threaded end to BS21
Fig. TT
*TH: 1/4 to 2
*Nickel-chrome plated
Solder
D
H
L
D
H
LE
H
D
L
H
L
D
H H1
D D1
L L
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
MaterialsParts
BodyBody capStemBallBall seatGland Packing
MaterialBrassBrassDezincification Resistant BrassBrass: Nickel-Chrome PlatingPTFEPTFE
Dimensions mm
mm
inch
523982
634282
75 51100
88 59130
98 64130
113 73150
126 80150
1/2
15
3/4
20
3/8
10523982
1/4
81
2511/4
3211/2
402
50Nominal Size
LHD
Dimensions mm
mm
inch
4239 482
5342 482
60 51 4100
72 59 4130
82 64 4130
92 73 4150
105 80 4150
1/2
15
3/4
20
3/8
104139 482
1/4
81
2511/4
3211/2
402
50Nominal Size
LHED
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
26 27
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
Safety exhaust, Screwed body cap,Blowout-proof stem, Latch lock handle
Threaded ends to ASME B1.20.1
W.O.G. non-shock 4.14 MPa (600 psi), Saturated steam pressure 1.03 MPa (150 psi)
W.O.G. non-shock 1.38 MPa (200 psi), –18ºC to + 93ºC (Not Freezing)
TYPE 600
TYPE 200
Single union, Screwed body cap,Blowout-proof Stem,
Threaded ends to ASME B1.20.1
● Exhaust hole diameter : 4mm (all nominal size)
Fig. AKTAFU• Threaded end to ASME B1.20.1
Fig. AKTAFS• Threaded end to ASME B1.20.1
Dimensions mm
mm
inchNominal Size
LHD
744580
805080
94 55110
1/2
15604560
3/8
10594560
1/4
8
3/4
20125
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions mm
mm
inch
6850488080
79 55 55110 90
86 60 61110105
96 65 66110105
109 75 80140120
127 91
200
153105
300
3/4
205045416065
3/8
106545448080
1/2
155045416065
1/4
8125
11/4
3211/2
40250
21/2
65380
179124
400
4100
D1
Nominal Size
LHH1D
*TT: 1/4 to 2
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 4 only**Nickel-chrome plated
*Nickel-Chrome Plated
Dimensions mm
mm
inch
63734880
3/4
2045474160
3/8
1056544580
1/2
1544474160
1/4
8 74 88 54110
125
82 98 58110
11/4
32 91113 63110
11/2
40104135 74140
250
–147 89200
21/2
65–
177103300
380
D
Nominal Size
LL1H
BRASS BALL VALVE
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
BRASS BALL VALVE
BRASS BALL VALVE
CTH W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)TH W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC non-shock 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 400/600
TYPE 400
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or solder joint ends.
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end to BS21
Fig. TO
• Threaded end to BS21
Fig. TH• Solder joint end to
ASME B16.18
Fig. CTH
• Threaded end to BS21
Fig. T
• Threaded end to ASME B1.20.1
Fig. AKT
• Threaded end to BS21
Fig. TT
*TH: 1/4 to 2
*Nickel-chrome plated
Solder
H
L
D
H
D
L
H
D
L
H1
D1
L
D
H
L
D
H
L
H
L
D
L
D1
H1
Dimensions mm
mm
inch
684980
80 55110
86 60110
101 65110
117 75140
136 91200
160105300
3/4
20604580
1/2
15564560
3/8
10125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD
Dimensions mm
mm
inchNominal Size
LHD
56.53555
714169
1/2
15392535
1/4
8442940
3/8
10322535
1/8
6125
593955
3/4
20
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*G/F PTFEG/F PTFE
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*G/F PTFEG/F PTFE
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
28 29
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 400
TYPE 600
• Threaded end to BS21
Fig. TK
• Threaded end to ASME B1.20.1• AKTK 1/4 to 2
Fig. AKTK
• Threaded end to BS21
Fig. TKT
• Threaded end to BS21
Fig. TM
• Threaded end to BS21
Fig. TKW
Dimensions mm
mm
inch
4436277040
56.541318560
5944348560
71 48 42100 76
78 54 48100 76
83 65 53125100
100 72 60125100
3/4
20
3/8
103931236035
1/2
153231236035
1/8
6
1/4
8125
11/4
3211/2
40250
Nominal Size
LHH1DD1
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals, Threaded ends to BS21
One-piece body, Blowout-proof Stem,Threaded ends to BS21 or NPT
One-piece body, Blowout-proof Stem, with Wing handleThreaded ends to BS21
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
Dimensions mm
mm
inchNominal Size
LHD
625365
735865
856790
987290
108 90110
124 98.5
110
1/2
15
3/4
20125
11/4
3211/2
40250
Dimensions mm
mm
inchNominal Size
L
HL1
H1DD1
565875798082
657379838082
78 88 83 90110 94
86 99 98105110 94
96114102109110 94
109135109124140120
1/2
15
3/4
20125
11/4
3211/2
40250
Dimensions mm
mm
inchNominal Size
LHD
624880
73 54110
85 58110
98 64110
108 75140
124 84150
1/2
15
3/4
20125
11/4
3211/2
40250
TL, CTL W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), TLT W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
TYPE 400W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 2 only**Nickel-chrome plated
*Size 2 only**Nickel-chrome plated
BRASS BALL VALVE, FULL PORT
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
BRASS BALL VALVE, FULL PORT
BRONZE BALL VALVE
W.O.G. non-shock 1.03 MPa (150 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 150
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Locking device, Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or solder joint ends
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end toBS21
Fig. TL• Solder joint end to
ASME B16.18
Fig. CTL• Threaded end to
BS21
Fig. TLT
• Threaded end to BS21
Fig. TF
• Threaded end to BS21
Fig. TFJ
Solder
H
L
D
H
D
L
H
D
L
H1
D1
L
D
H
L
D
H
L
H
L
D
L
D1
H1
Dimensions mm
mm
inch
684980
80 55110
86 60110
101 65110
117 75140
136 91200
160105300
3/4
20604580
1/2
15564560
3/8
101
2511/4
3211/2
402
5021/2
653
80Nominal Size
LHD
Dimensions mm
mm
inchNominal Size
LHD
56.53555
714169
1/2
15392535
1/4
8442940
3/8
10322535
1/8
61
25593955
3/4
20
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*G/F PTFEG/F PTFE
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*G/F PTFEG/F PTFE
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
28 29
BRASS BALL VALVE
BRASS BALL VALVE
BRASS BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 400
TYPE 600
• Threaded end to BS21
Fig. TK
• Threaded end to ASME B1.20.1• AKTK 1/4 to 2
Fig. AKTK
• Threaded end to BS21
Fig. TKT
• Threaded end to BS21
Fig. TM
• Threaded end to BS21
Fig. TKW
Dimensions mm
mm
inch
4436277040
56.541318560
5944348560
71 48 42100 76
78 54 48100 76
83 65 53125100
100 72 60125100
3/4
20
3/8
103931236035
1/2
153231236035
1/8
6
1/4
81
2511/4
3211/2
402
50Nominal Size
LHH1DD1
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals, Threaded ends to BS21
One-piece body, Blowout-proof Stem,Threaded ends to BS21 or NPT
One-piece body, Blowout-proof Stem, with Wing handleThreaded ends to BS21
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
Dimensions mm
mm
inchNominal Size
LHD
625365
735865
856790
987290
108 90110
124 98.5
110
1/2
15
3/4
20125
11/4
3211/2
40250
Dimensions mm
mm
inchNominal Size
L
HL1
H1DD1
565875798082
657379838082
78 88 83 90110 94
86 99 98105110 94
96114102109110 94
109135109124140120
1/2
15
3/4
20125
11/4
3211/2
40250
Dimensions mm
mm
inchNominal Size
LHD
624880
73 54110
85 58110
98 64110
108 75140
124 84150
1/2
15
3/4
20125
11/4
3211/2
40250
TL, CTL W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), TLT W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
TYPE 400W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
*Size 2 only**Nickel-chrome plated
*Size 2 only**Nickel-chrome plated
BRASS BALL VALVE, FULL PORT
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Dezincification Resistant BrassBrass**PTFEFKM
BRASS BALL VALVE, FULL PORT
BRONZE BALL VALVE
W.O.G. non-shock 1.03 MPa (150 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 150
TYPE 400
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Locking device, Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21 or solder joint ends
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
• Threaded end toBS21
Fig. TL• Solder joint end to
ASME B16.18
Fig. CTL• Threaded end to
BS21
Fig. TLT
• Threaded end to BS21
Fig. TF
• Threaded end to BS21
Fig. TFJ
Solder
H
L
D
H
L
D
H
L
D
D
H
L
H
D
L
L
D
H
Dimensions mm
mm
inch
90.5 89.5
7982
103.5 107.5
83 82
119124 90 94
1/2
15
3/4
20125
Nominal Size
LL1HD
Dimensions mm
mm
inch
120 88130
130 95160
140100160
165115230
180122230
190153400
200162400
3/4
20110 85130
1/2
15125
11/4
3211/2
40250
21/2
65380
230190460
4100
Nominal Size
LHD
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBronzeBronzeDezincification Resistant BrassBrass**/ Stainless Steel*PTFEPTFE
*Size 4 only**Chrome or Nickel-chrome plated
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
30 31
BRONZE BALL VALVE
BRONZE BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 1.4 MPa (14kgf/cm2), W.O.G. 150ºC 0.69 MPa (7kgf/cm2)
10K
TYPE 400
• Flanged ends to JIS 10K
Fig. TB
Single union, Screwed body and cap,Blowout-proof stem, Double O-ring stem seals,
Threaded ends to BS21 or solder joint ends
Bolted body cap, Full boreFringed ends to JIS B2240 10K
Dimensions mm
mm
inch
70 73 55100
83 88 63130
99 99 69130
117117 78150
139139 85150
167167108200
3/4
2049493982
3/8
1061614882
1/2
1549
3982
1/4
8125
11/4
3211/2
40250
21/2
65Nominal Size
LL1HD
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass (chrome free plated)PTFEPTFE
*Size 21/2 only
BRASS BALL VALVE, FULL PORTW.O.G. non-shock 2.76 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600Three piece body with Mounting pad
Threaded end to ASME B1.20.1Solder jointed to ASME B16.18
• Threaded end to BS21
Fig. TLTU• Solder joint end to
ASME B16.18
Fig. CTLTU
*C3TM 3/8 to 21/2
• Threaded end toASME B1.20.1
Fig. AK3TM• Solder joint end to
ASME B16.18
Fig. C3TM*
Approvals(up to 2)
NSF/ANSI61-8
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Dimensions mm
mm
inchNominal Size
LHD
804480
94 50110
3/4
20603770
3/8
10744080
1/2
15593770
1/4
8125
Dimensions mm
mm
inch
423555
524170
604570
72 54100
84 59100
92 75130
110 82130
1/2
15
3/4
20
3/8
10423555
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
Dimensions mm
mm
inch
434472
514587
594987
71 63116
78 67116
88 71117
99 76117
1/2
15
3/4
20
3/8
10424472
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel platedBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEG/F PTFE
BRASS BALL VALVE, FULL PORT
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel platedBrass*PTFEFKM
BRASS BALL VALVE
BRASS BALL VALVE, FULL PORT
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), Saturated steam pressure 0.98 MPa (142 psi)
TYPE 600
TYPE 400
TYPE 600
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
• Threaded end to BS21
Fig. ZET
• Threaded end to BS21
Fig. ZO
• Threaded end to BS21
Fig. ZS
Solder
Solder
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
H
L
D
H
L
D
H
L
D
D
H
L
H
D
L
L
D
H
Dimensions mm
mm
inch
90.5 89.5
7982
103.5 107.5
83 82
119124 90 94
1/2
15
3/4
201
25Nominal Size
LL1HD
Dimensions mm
mm
inch
120 88130
130 95160
140100160
165115230
180122230
190153400
200162400
3/4
20110 85130
1/2
151
2511/4
3211/2
402
5021/2
653
80230190460
4100
Nominal Size
LHD
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 80ºC 1.96 MPa (286 psi)
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassStainless Steel (Type 304)PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBronzeBronzeDezincification Resistant BrassBrass**/ Stainless Steel*PTFEPTFE
*Size 4 only**Chrome or Nickel-chrome plated
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
30 31
BRONZE BALL VALVE
BRONZE BALL VALVE
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 1.4 MPa (14kgf/cm2), W.O.G. 150ºC 0.69 MPa (7kgf/cm2)
10K
TYPE 400
• Flanged ends to JIS 10K
Fig. TB
Single union, Screwed body and cap,Blowout-proof stem, Double O-ring stem seals,
Threaded ends to BS21 or solder joint ends
Bolted body cap, Full boreFringed ends to JIS B2240 10K
Dimensions mm
mm
inch
70 73 55100
83 88 63130
99 99 69130
117117 78150
139139 85150
167167108200
3/4
2049493982
3/8
1061614882
1/2
1549
3982
1/4
81
2511/4
3211/2
402
5021/2
65Nominal Size
LL1HD
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass (chrome free plated)PTFEPTFE
*Size 21/2 only
BRASS BALL VALVE, FULL PORTW.O.G. non-shock 2.76 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600Three piece body with Mounting pad
Threaded end to ASME B1.20.1Solder jointed to ASME B16.18
• Threaded end to BS21
Fig. TLTU• Solder joint end to
ASME B16.18
Fig. CTLTU
*C3TM 3/8 to 21/2
• Threaded end toASME B1.20.1
Fig. AK3TM• Solder joint end to
ASME B16.18
Fig. C3TM*
Approvals(up to 2)
NSF/ANSI61-8
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Dimensions mm
mm
inchNominal Size
LHD
804480
94 50110
3/4
20603770
3/8
10744080
1/2
15593770
1/4
8125
Dimensions mm
mm
inch
423555
524170
604570
72 54100
84 59100
92 75130
110 82130
1/2
15
3/4
20
3/8
10423555
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
Dimensions mm
mm
inch
434472
514587
594987
71 63116
78 67116
88 71117
99 76117
1/2
15
3/4
20
3/8
10424472
1/4
8125
11/4
3211/2
40250
Nominal Size
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel platedBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatGrand packing
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEG/F PTFE
BRASS BALL VALVE, FULL PORT
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel platedBrass*PTFEFKM
BRASS BALL VALVE
BRASS BALL VALVE, FULL PORT
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi), Saturated steam pressure 0.98 MPa (142 psi)
TYPE 600
TYPE 400
TYPE 600
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
• Threaded end to BS21
Fig. ZET
• Threaded end to BS21
Fig. ZO
• Threaded end to BS21
Fig. ZS
Solder
Solder
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
H
D
L
L
H
D
L
H
D
H
L1
L
D
L1
H
L
D
H
D
L
L1
Mounting Pad
Dimensions mm
mm
inch
42463555
53544170
60734570
72 88 54100
84100 59100
92115 75130
110140 82130
1/2
15
3/4
20
3/8
1042
3555
1/4
8125
11/4
3211/2
40250
Nominal Size
L
HD
Dimensions mm
mm
inch
42463770
53544080
60734380
72 88 50110
84100 55110
92115 65150
110140 72150
1/2
15138164100200
65
3/4
20
3/8
1042
3770
1/4
8125
11/4
3211/2 21/2
40250
167187112300
380
193
131300
4100
Nominal Size
L
HD
Dimensions mm
mm
inch
423770
534080
604380
72 50110
84 55110
92 65150
110 72150
1/2
15
3/4
20
3/8
10423770
1/4
8125
11/4
3211/2
40250
Nominal Size
LH
L1
L1
D
MaterialsParts
BodyBody capStem
Ball Ball seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Brass: Nickel platedBrass: chrome free plated (Size 1/4 to 3)Brass: Nickel-chrome plated (Size 4)
PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel platedBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel plated Brass: Chrome free platedPTFEFKM
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
32 33
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi)*, W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600
• Threaded end to ASME B1. 20. 1
Fig. AKSZA
• Threaded end to BS21
Fig. SZA
• Solder joint to ASME B16.18
Fig. CSZAW
• Solder joint to ASMB 16.18
Fig. CSZA
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to BS21
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
• Threaded end to ASME B1. 20. 1
Fig. AKSZAW
Approvals(up to 2)
CSA (US/C)NSF/ANSI 61-8 UL FM
*Size 4 : W.O.G. non-shock 2.76MPa (400psi), W.O.G. 150˚C 0.69MPa (100psi)
*Size 4 only
CSA (US/C) UL FMNSF/ANSI61-8
*AKSZA: Size 1/4 to 3, **AKSZA only
* **
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Approvals(up to 2)
*AKSZAW only
*
T4T/AKT4T: Port position fig: Position 1,2,3 & 4 T4L: Port position fig: Position 1 & 2
Dimensions mm
mm
inchNominal Size
LL1HD
70 35 52130
85 42.5
56130
100 50 63150
115 57.5
68150
130 65
94.5230
150 75102230
1/2
15
3/4
20125
11/4
3211/2
40250
Port position fig: Position 1 & 2
Dimensions (AKTNP) mm
mm
inchNominal Size
LL1HD
67 33.5
4580
68344880
79 40 55110
89 44.5
60110
100 50 65130
115 57.5
75140
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions (TN/AKTN) mm
mm
inch
68344880
79 39.5
55110
89 44.5
60110
100 50 65110
115 57.5
75140
138 69 91200
166 83105300
3/4
2046233570
3/8
1067
33.54580
1/2
1540203060
1/4
8125
11/4
3211/2
40250
21/2
65380
D
Nominal Size
LL1H
3-WAY BRASS BALL VALVE
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass**PTFEFKM
3-WAY BRONZE BALL VALVE
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 400
TYPE 400
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals*
Threaded ends to BS21 or NPT, or solder joint ends.
Screwed body cap, 4-seat, L or T-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
Solder joint end valves should not be used inservice where the temperature of line fluidis higher than the softening point of solder.
• Threaded end toASME B1.20.1
Fig. AKTNP
• Threaded end to BS21
Fig. TN
• Threaded end to ASME B1.20.1
Fig. AKTN
• Solder joint end toASME B16.18• CTN 1/2 to 2
Fig. CTN
• Solder joint end toASME B16.18
Fig. CTNP
• Threaded end to BS21
Fig. T4T
• Threaded end to ASME B1.20.1
Fig. AKT4T
• Threaded end to BS21
Fig. T4L
*Size 21/2 and 3
*Size 1/2 and larger
Port position fig: Position 1 & 2
TYPE 400 3-WAY BRONZE BALL VALVE,with MOUNTING PAD
Solder
Solder
*Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
**Chrome or Nickel-chrome plated
H
D
L
L
H
D
L
H
D
H
L1
L
D
L1
H
L
D
H
D
L
L1
Mounting Pad
Dimensions mm
mm
inch
42463555
53544170
60734570
72 88 54100
84100 59100
92115 75130
110140 82130
1/2
15
3/4
20
3/8
1042
3555
1/4
81
2511/4
3211/2
402
50Nominal Size
L
HD
Dimensions mm
mm
inch
42463770
53544080
60734380
72 88 50110
84100 55110
92115 65150
110140 72150
1/2
15138164100200
65
3/4
20
3/8
1042
3770
1/4
81
2511/4
3211/2 21/2
402
50167187112300
380
193
131300
4100
Nominal Size
L
HD
Dimensions mm
mm
inch
423770
534080
604380
72 50110
84 55110
92 65150
110 72150
1/2
15
3/4
20
3/8
10423770
1/4
81
2511/4
3211/2
402
50Nominal Size
LH
L1
L1
D
MaterialsParts
BodyBody capStem
Ball Ball seatO-ring
MaterialBrass/Bronze*Brass/Bronze*Brass: Nickel platedBrass: chrome free plated (Size 1/4 to 3)Brass: Nickel-chrome plated (Size 4)
PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel platedBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassBrass: Nickel plated Brass: Chrome free platedPTFEFKM
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
32 33
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
BRASS BALL VALVE, FULL PORT
Ba
ll V
alv
es B
all V
alv
es
W.O.G. non-shock 4.14 MPa (600 psi)*, W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
W.O.G. non-shock 4.14 MPa (600 psi), W.O.G. 150ºC 1.03 MPa (150 psi)
TYPE 600
TYPE 600
TYPE 600
• Threaded end to ASME B1. 20. 1
Fig. AKSZA
• Threaded end to BS21
Fig. SZA
• Solder joint to ASME B16.18
Fig. CSZAW
• Solder joint to ASMB 16.18
Fig. CSZA
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to BS21
Bolted body and cap, Blowout-proof Stem,Double O-ring stem seals,
Threaded ends to ASME B1.20.1 or solder joint ends.
• Threaded end to ASME B1. 20. 1
Fig. AKSZAW
Approvals(up to 2)
CSA (US/C)NSF/ANSI 61-8 UL FM
*Size 4 : W.O.G. non-shock 2.76MPa (400psi), W.O.G. 150˚C 0.69MPa (100psi)
*Size 4 only
CSA (US/C) UL FMNSF/ANSI61-8
*AKSZA: Size 1/4 to 3, **AKSZA only
* **
Solder joint end valves should not be used in servicewhere the temperature of line fluid is higher than thesoftening point of solder.
Approvals(up to 2)
*AKSZAW only
*
T4T/AKT4T: Port position fig: Position 1,2,3 & 4 T4L: Port position fig: Position 1 & 2
Dimensions mm
mm
inchNominal Size
LL1HD
70 35 52130
85 42.5
56130
100 50 63150
115 57.5
68150
130 65
94.5230
150 75102230
1/2
15
3/4
20125
11/4
3211/2
40250
Port position fig: Position 1 & 2
Dimensions (AKTNP) mm
mm
inchNominal Size
LL1HD
67 33.5
4580
68344880
79 40 55110
89 44.5
60110
100 50 65130
115 57.5
75140
1/2
15
3/4
20125
11/4
3211/2
40250
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFEFKM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBrassDezincification Resistant BrassBrass*PTFEFKM
Dimensions (TN/AKTN) mm
mm
inch
68344880
79 39.5
55110
89 44.5
60110
100 50 65110
115 57.5
75140
138 69 91200
166 83105300
3/4
2046233570
3/8
1067
33.54580
1/2
1540203060
1/4
8125
11/4
3211/2
40250
21/2
65380
D
Nominal Size
LL1H
3-WAY BRASS BALL VALVE
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrass/Bronze*BrassDezincification Resistant BrassBrass**PTFEFKM
3-WAY BRONZE BALL VALVE
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
W.O.G. non-shock 2.76 MPa (400 psi), W.O.G. 150ºC 0.69 MPa (100 psi)
TYPE 400
TYPE 400
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals*
Threaded ends to BS21 or NPT, or solder joint ends.
Screwed body cap, 4-seat, L or T-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
Screwed body cap, 2-seat, L-port design,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21 or NPT
Solder joint end valves should not be used inservice where the temperature of line fluidis higher than the softening point of solder.
• Threaded end toASME B1.20.1
Fig. AKTNP
• Threaded end to BS21
Fig. TN
• Threaded end to ASME B1.20.1
Fig. AKTN
• Solder joint end toASME B16.18• CTN 1/2 to 2
Fig. CTN
• Solder joint end toASME B16.18
Fig. CTNP
• Threaded end to BS21
Fig. T4T
• Threaded end to ASME B1.20.1
Fig. AKT4T
• Threaded end to BS21
Fig. T4L
*Size 21/2 and 3
*Size 1/2 and larger
Port position fig: Position 1 & 2
TYPE 400 3-WAY BRONZE BALL VALVE,with MOUNTING PAD
Solder
Solder
*Nickel-chrome plated
*Chrome or Nickel-chrome plated
*Chrome or Nickel-chrome plated
**Chrome or Nickel-chrome plated
H
D
L
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”B” in Form 3. Flow is between Ports ”A” and ”C” in Form 4. All forms are available for switching, diverging or mixing of flows. The stopper is assembled for standard operation pattern to switch flow from Form 1 to Form 2.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)• Pattern 3 : From Form 3 to Form 4• Pattern 4 : From Form 2 to Form 3
Please select one of the above operationpatterns at time of order.
3-Way 4-seatT-port ball valve
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”C” in Form 4. Flow can be switched from Form 1 to Form 2, (Standard operation pattern) or from Form 1 to Form 4 in either direction. The stopper is assembled for the standard operation pattern.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
Fluid Passage
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)
Please select one of the above operationpatterns at time of order.
3-Way 2-seatT-port ball valve
3-Way 4-seatL-port ball valve
KITZ BRONZE & BRASS VALVES
ALLOWABLE PORT ORIENTATION
KITZ BRONZE & BRASS VALVES
34 35
Ba
ll V
alv
es B
all V
alv
esValve Design
3-Way 2-seatL-port ball valve
Form
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3Not Available
Form 4
A A
A A
B B
B B
CP1
C
A BP1P2
P1
CCP1
A BP2P1
Form 1 Form 2
Top View
Top View
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3 Form 4
A A
A A
B B
B B
CCP1
Top View
A B A B
C
P1
CP1 P1
P2P2P1
Form 1 Form 2
Top View
Dimensions mm1/4
8mm
inch
504560
504560
654580
685080
79 55110
86 60110
96 65110
109 75140
127 91200
153105300
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFENBR
Gas service 40ºC 0.98 MPa (142 psi)
Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Fig. TG
BRASS BALL VALVE,DESIGNED FOR GAS SERVICE
*Nickel-chrome plated
H
D
L
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”B” in Form 3. Flow is between Ports ”A” and ”C” in Form 4. All forms are available for switching, diverging or mixing of flows. The stopper is assembled for standard operation pattern to switch flow from Form 1 to Form 2.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)• Pattern 3 : From Form 3 to Form 4• Pattern 4 : From Form 2 to Form 3
Please select one of the above operationpatterns at time of order.
3-Way 4-seatT-port ball valve
All ports are open in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow is between Ports ”A” and ”C” in Form 4. Flow can be switched from Form 1 to Form 2, (Standard operation pattern) or from Form 1 to Form 4 in either direction. The stopper is assembled for the standard operation pattern.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
Fluid Passage
Flow is between Ports ”A” and ”C” in Form 1. Flow is between Ports ”B” and ”C” in Form 2. Flow paths in Form 1and Form 2 can be changed each other.
When the fluid pressure P2 in the closed path is higher than P1 in the open path, a little fluid leakage may occur to P1 through the ball seat of the closed path.
1
2
1
2
■ Operation patterns available• Pattern 1 : From Form 1 to Form 4• Pattern 2 : From Form 1 to Form 2 (Standard)
Please select one of the above operationpatterns at time of order.
3-Way 2-seatT-port ball valve
3-Way 4-seatL-port ball valve
KITZ BRONZE & BRASS VALVES
ALLOWABLE PORT ORIENTATION
KITZ BRONZE & BRASS VALVES
34 35
Ba
ll V
alv
es B
all V
alv
esValve Design
3-Way 2-seatL-port ball valve
Form
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3Not Available
Form 4
A A
A A
B B
B B
CP1
C
A BP1P2
P1
CCP1
A BP2P1
Form 1 Form 2
Top View
Top View
P2 P1
P1 P1 P1 P2
P1P2
C C
Form 1 Form 2
Form 3 Form 4
A A
A A
B B
B B
CCP1
Top View
A B A B
C
P1
CP1 P1
P2P2P1
Form 1 Form 2
Top View
Dimensions mm1/4
8mm
inch
504560
504560
654580
685080
79 55110
86 60110
96 65110
109 75140
127 91200
153105300
3/8
10
1/2
15
3/4
20125
11/4
3211/2
40250
21/2
65380
Nominal Size
LHD
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBrassBrassDezincification Resistant BrassBrass*PTFENBR
Gas service 40ºC 0.98 MPa (142 psi)
Screwed body cap,Blowout-proof Stem, Double O-ring stem seals
Threaded ends to BS21
Fig. TG
BRASS BALL VALVE,DESIGNED FOR GAS SERVICE
*Nickel-chrome plated
H
L1L
D
H
L1L
D
H
LL1
D
H
LL1
D
L1L
H
H
LL1
Dimensions mm
mm
inch
525677
47.5
56 60.5
79 47.5
636790
47.5
707596
47.5
1/2
15
3/4
20125
11/4
32Nominal Size
L
Valve openHD
Dimensions mm
mm
inch
275761
30 62.5
61
35 70.5
70
418181
1/2
15
3/4
20125
11/4
32Nominal Size
L
Valve openH
Dimensions mm
mm
inch
525670
56 60.5
72
636783
707589
1/2
15
3/4
20125
11/4
32Nominal Size
L
L1
L1
L1Valve openH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
Material
Material
Material
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
Material
Material
Material
BronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
L
Valve openHD
30 62.5
68 47.5
35 70.5
77 47.5
3/4
20275768
47.5
1/2
15125
Dimensions mm
mm
inchNominal Size
L
L1
L1Valve openH
D
56 60.5
79 47.5
636790
47.5
3/4
20525677
47.5
1/2
15125
Dimensions mm
mm
inch
275768
47.5
30 62.5
68 47.5
35 70.5
77 47.5
418188
47.5
1/2
15
3/4
20125
11/4
32Nominal Size
LL1
Valve openHD
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
36 37
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
• Flow Control Valves with Indicators
Fig. INAH
• Flow Control Valves
Fig. NAH
• Flow Control Valves
Fig. NSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
IndicatorFemale & Male Threaded ends to BS21
IndicatorFemale & Male Threaded ends to BS21
• On-off Valves
Fig. RSH
• Flow Control Valves with Indicators
Fig. INSH
• On-off Valves
Fig. RAH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
H
L1L
D
H
L1L
D
H
LL1
D
H
LL1
D
L1L
H
H
LL1
Dimensions mm
mm
inch
525677
47.5
56 60.5
79 47.5
636790
47.5
707596
47.5
1/2
15
3/4
20125
11/4
32Nominal Size
L
Valve openHD
Dimensions mm
mm
inch
275761
30 62.5
61
35 70.5
70
418181
1/2
15
3/4
20125
11/4
32Nominal Size
L
Valve openH
Dimensions mm
mm
inch
525670
56 60.5
72
636783
707589
1/2
15
3/4
20125
11/4
32Nominal Size
L
L1
L1
L1Valve openH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
Material
Material
Material
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
Material
Material
Material
BronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
L
Valve openHD
30 62.5
68 47.5
35 70.5
77 47.5
3/4
20275768
47.5
1/2
151
25
Dimensions mm
mm
inchNominal Size
L
L1
L1Valve openH
D
56 60.5
79 47.5
636790
47.5
3/4
20525677
47.5
1/2
151
25
Dimensions mm
mm
inch
275768
47.5
30 62.5
68 47.5
35 70.5
77 47.5
418188
47.5
1/2
15
3/4
201
2511/4
32Nominal Size
LL1
Valve openHD
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
36 37
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
CLASS 200
• Flow Control Valves with Indicators
Fig. INAH
• Flow Control Valves
Fig. NAH
• Flow Control Valves
Fig. NSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
IndicatorFemale & Male Threaded ends to BS21
IndicatorFemale & Male Threaded ends to BS21
• On-off Valves
Fig. RSH
• Flow Control Valves with Indicators
Fig. INSH
• On-off Valves
Fig. RAH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Female & Male Threaded ends to BS21
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
LL1
D
H
D
H
L1L
L1L
H
H
LL1
■Nominal size: 1/2 Cv=1.8 ■Nominal size: 3/4 Cv=2.6 ■Nominal size: 1, 11/4 Cv=3.3
8060
446810
20406080
6810
20
40
000 10 20 30 40 50 60 70 80 90 1001
10
100
1
10
100
1
10
100
10 20 30 40 50 60 70 80 90 100
0 1 2
10 20 24 30 38
3 4 5 6 7 8 9 10
543210
10 20 30 40 50 60 70 80 90 100
9 16 21 288 15 20
0 1 2 3 4 5 6
0 1 2 3 0 1 2 3 4
0 1 2 3 4 5 6 7 8
46810
20406080
※ Indicator readings refer to frow rates when the pressure loss is 60 kPa.
Handle Turn
Indicator readings min min min
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Dimensions mm
mm
inch
52 47.5
70
56 55.5
72
636983
707089
1/2
15
3/4
20125
11/4
32Nominal Size
LL1
Valve openH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
Material
Material
Material
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
L
Valve openHD
30 57.5
68 47.5
35 67.5
77 47.5
3/4
2027
48.568
47.5
1/2
15125
Dimensions mm
mm
inchNominal Size
L
Valve openHD
56 55.5
79 47.5
636390
47.5
3/4
2052
47.577
47.5
1/2
15125
Dimensions mm
mm
inch
27 48.5
61
30 57.5
61
35 67.5
70
417681
1/2
15
3/4
20125
11/4
32Nominal Size
L
L1
L1
L1Valve openH
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
38 39
FLOW CHARASTARISTICS
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200CLASS 200
CLASS 200
CLASS 200
• On-off Valves
Fig. CRAH
• Flow Control Valves
Fig. CNAH
• Flow Control Valves
Fig. CNSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21
• On-off Valves
Fig. CRSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
LL1
D
H
D
H
L1L
L1L
H
H
LL1
■Nominal size: 1/2 Cv=1.8 ■Nominal size: 3/4 Cv=2.6 ■Nominal size: 1, 11/4 Cv=3.3
8060
446810
20406080
6810
20
40
000 10 20 30 40 50 60 70 80 90 1001
10
100
1
10
100
1
10
100
10 20 30 40 50 60 70 80 90 100
0 1 2
10 20 24 30 38
3 4 5 6 7 8 9 10
543210
10 20 30 40 50 60 70 80 90 100
9 16 21 288 15 20
0 1 2 3 4 5 6
0 1 2 3 0 1 2 3 4
0 1 2 3 4 5 6 7 8
46810
20406080
※ Indicator readings refer to frow rates when the pressure loss is 60 kPa.
Handle Turn
Indicator readings min min min
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Handle Turn
Indicator readings
Lift(%)
Lift(mm)
Flowrate
Pressureloss
Dimensions mm
mm
inch
52 47.5
70
56 55.5
72
636983
707089
1/2
15
3/4
20125
11/4
32Nominal Size
LL1
Valve openH
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
Material
Material
Material
BronzeBrassDezincification Resistant BrassPTFEFKM
MaterialsParts
BodyBonnetStemDiscO-ring
MaterialBronzeBrassDezincification Resistant BrassPTFEFKM
Dimensions mm
mm
inchNominal Size
L
Valve openHD
30 57.5
68 47.5
35 67.5
77 47.5
3/4
2027
48.568
47.5
1/2
151
25
Dimensions mm
mm
inchNominal Size
L
Valve openHD
56 55.5
79 47.5
636390
47.5
3/4
2052
47.577
47.5
1/2
151
25
Dimensions mm
mm
inch
27 48.5
61
30 57.5
61
35 67.5
70
417681
1/2
15
3/4
201
2511/4
32Nominal Size
L
L1
L1
L1Valve openH
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
38 39
FLOW CHARASTARISTICS
Fan
coil
Va
lve
s Fan
coil V
alv
es
CLASS 200CLASS 200
CLASS 200
CLASS 200
• On-off Valves
Fig. CRAH
• Flow Control Valves
Fig. CNAH
• Flow Control Valves
Fig. CNSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21
• On-off Valves
Fig. CRSH
W.O.G. 60ºC 1.57 MPa, W.O.G. 120ºC 1.37 MPa
Solder joint end & Female Threaded end to BS21FANCOIL VALVES, BRONZE,FLOW CONTROL, ANGLE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, GLOBE TYPE
FANCOIL VALVES, BRONZE,FLOW CONTROL, GLOBE TYPE
FANCOIL VALVES, BRONZE,ON-OFF, ANGLE TYPE
D
H
L
D
H
L
D
H
L
D
H
L
H
D
L
L
H
D
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
92.57240
104 75.5
40
3/4
20887240
1/2
15125
Dimensions mm
mm
inchNominal Size
LHD
667240
75.5 75.5
40
3/4
20627240
1/2
15125
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
617240
70.5 75.5
40
3/4
20567240
1/2
15125
Dimensions mm
mm
inchNominal Size
LHD
667240
75.5 75.5
40
3/4
20627240
1/2
15125
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
40 41
Fan
coil
Va
lve
s Fan
coil V
alv
es
10K
10K
10K
Fig. RTRR
Fig. RTRM
Fig. RTRO
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem sealsMale (parallel) & Female
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
10K
Fig. RTRU
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Female & Male (union)Threaded ends to BS21
Dimensions mm
mm
inchNominal Size
LHD
100.5 63.5
55
115.5 66.5
55
3/4
20 94.5 63.5
55
1/2
15125
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 80ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 4 to 30 /min
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 80ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 3 to 40 /min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBronzeDezincification Resistant BrassBrass: Chrome platedPTFEFKM
MaterialsParts
BodyBonnetCapStemDisc
Material
Material
BronzeBrassBrassDezincification Resistant BrassReinforced PTFE
Dimensions mm
mm
inchNominal Size
LValve openH
D
121.5 89 40
3/4
20 118.5
89 40
1/2
15
10K
10K
Fig. BS
Fig. BSS
Constant flow control valveFemale & Male (union nipple)
Threaded ends to BS21
Constant flow control valve, Ball valve typeFemale & Male (union nipple)
Threaded ends to BS21
BRONZE BALANCING VALVESLOW-NOISE TYPE
BRONZE BALANCING VALVESwith BUILT-IN SCREEN
D
H
L
D
H
L
D
H
L
D
H
L
H
D
L
L
H
D
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
92.57240
104 75.5
40
3/4
20887240
1/2
15125
Dimensions mm
mm
inchNominal Size
LHD
667240
75.5 75.5
40
3/4
20627240
1/2
151
25
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
MaterialsParts
BodyBody capStemBallBall seatO-ring
MaterialBronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
617240
70.5 75.5
40
3/4
20567240
1/2
151
25
Dimensions mm
mm
inchNominal Size
LHD
667240
75.5 75.5
40
3/4
20627240
1/2
151
25
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
40 41
Fan
coil
Va
lve
s Fan
coil V
alv
es
10K
10K
10K
Fig. RTRR
Fig. RTRM
Fig. RTRO
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem sealsMale (parallel) & Female
Threaded ends to BS21
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Male & Female Threaded ends to BS21
10K
Fig. RTRU
Water 0ºC to 90ºC 1.0 MPa (Not Freezing)
BRONZE BALL VALVES withDETACHABLE HANDLE FOR FANCOIL UNIT
Screwed body cap, Blowout-proof Stem,Double O-ring stem seals
Female & Male (union)Threaded ends to BS21
Dimensions mm
mm
inchNominal Size
LHD
100.5 63.5
55
115.5 66.5
55
3/4
20 94.5 63.5
55
1/2
15125
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 80ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 4 to 30 /min
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 80ºC,Control range 0.05 MPa to 0.49 MPa, Flow rate 3 to 40 /min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBronzeDezincification Resistant BrassBrass: Chrome platedPTFEFKM
MaterialsParts
BodyBonnetCapStemDisc
Material
Material
BronzeBrassBrassDezincification Resistant BrassReinforced PTFE
Dimensions mm
mm
inchNominal Size
LValve openH
D
121.5 89 40
3/4
20 118.5
89 40
1/2
15
10K
10K
Fig. BS
Fig. BSS
Constant flow control valveFemale & Male (union nipple)
Threaded ends to BS21
Constant flow control valve, Ball valve typeFemale & Male (union nipple)
Threaded ends to BS21
BRONZE BALANCING VALVESLOW-NOISE TYPE
BRONZE BALANCING VALVESwith BUILT-IN SCREEN
D
L
H
Predetermined Flow Rates and Product Coding forBalancing Valves and Balancers ”SADAMARU”
●Predetermined Flow Rate
Dimensions mm
mm
inchNominal Size
LHD
92.57240
104 75.5
40
3/4
20887240
1/2
15125
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 60ºC,Control range 0.15 MPa to 0.49 MPa, Flow rate 5 to 30 /min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
Material
Note: Flow rates marked with ● are available.
Product Coding
Example : RTUC, Nominal size 20, Predetermined flow rate: 10R/min
Predetermined Flow Rate
Product Code: BS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
4 5 7.5 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
●
(R/min)
(R/min)
(R/min)
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
42 43
Ba
lan
cin
g V
alv
es B
ala
ncin
g V
alv
es
10K
Fig. RTUC
RTUC20-10
BSBSSRTUC -
Ball ValveFemale & Male (union nipple)
Threaded ends to BS21
”SADAMARU”CONSTANT FLOW CONTROL
Product Code: BSS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
25
43 5 7.56 10 12.5 15 17.5 20 25 30 35 40
●
●
● ● ● ● ● ● ●
● ●
● ● ● ● ● ● ● ● ● ●
●
●
●
Product Code: RTUC [Controllable flow rate ±15%, ±20% (5 /min only)]Nominal Size (mm)
15
20
25
5 7.56 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ●
● ● ● ●
8
●
● ● ● ● ● ●
●
●
●
Nominal Size
Constant Flow Valve Product Code
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFENBR
Dimensions mm
mm
inchNominal Size
LHD
584240
3/4
20 52.5
3940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
584240
3/4
20 52.5
3940
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
584240
3/4
20 52.5
3940
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE
UTILITY BALL VALVES, STRAIGHT TYPE
Fig. S22
Fig. S1
Fig. S2
Male (parallel) & Male Threaded ends to BS21
Nickel-Chrome plated bodyMale (parallel) & Male Threaded ends to BS21
Nickel-Chrome plated body, For kerosene serviceMale (parallel) & Male Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
D
L
H
D
L
H
D
L
H
D
L
H
Predetermined Flow Rates and Product Coding forBalancing Valves and Balancers ”SADAMARU”
●Predetermined Flow Rate
Dimensions mm
mm
inchNominal Size
LHD
92.57240
104 75.5
40
3/4
20887240
1/2
151
25
Max working pressure 1.0 MPa, Working temperature Water 0ºC to 60ºC,Control range 0.15 MPa to 0.49 MPa, Flow rate 5 to 30 /min
MaterialsParts
BodyCapStemBallBall seatsO-ring
BronzeBronzeDezincification Resistant BrassBrass: Nickel-chrome platedPTFEEPDM
Material
Note: Flow rates marked with ● are available.
Product Coding
Example : RTUC, Nominal size 20, Predetermined flow rate: 10R/min
Predetermined Flow Rate
Product Code: BS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
4 5 7.5 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ●
●
(R/min)
(R/min)
(R/min)
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
42 43
Ba
lan
cin
g V
alv
es B
ala
ncin
g V
alv
es
10K
Fig. RTUC
RTUC20-10
BSBSSRTUC -
Ball ValveFemale & Male (union nipple)
Threaded ends to BS21
”SADAMARU”CONSTANT FLOW CONTROL
Product Code: BSS [Controllable flow rate ±10%]Nominal Size (mm)
15
20
25
43 5 7.56 10 12.5 15 17.5 20 25 30 35 40
●
●
● ● ● ● ● ● ●
● ●
● ● ● ● ● ● ● ● ● ●
●
●
●
Product Code: RTUC [Controllable flow rate ±15%, ±20% (5 /min only)]Nominal Size (mm)
15
20
25
5 7.56 10 12.5 15 17.5 20 25 30
● ● ● ● ● ● ●
● ● ● ●
8
●
● ● ● ● ● ●
●
●
●
Nominal Size
Constant Flow Valve Product Code
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFENBR
Dimensions mm
mm
inchNominal Size
LHD
584240
3/4
20 52.5
3940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
584240
3/4
20 52.5
3940
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
584240
3/4
20 52.5
3940
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE
UTILITY BALL VALVES, STRAIGHT TYPE
Fig. S22
Fig. S1
Fig. S2
Male (parallel) & Male Threaded ends to BS21
Nickel-Chrome plated bodyMale (parallel) & Male Threaded ends to BS21
Nickel-Chrome plated body, For kerosene serviceMale (parallel) & Male Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
D
L
H
D
L
H
D
L
H
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
44 45
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
314240
3/4
20 28.5
3940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
585540
3/4
20 52.5
5240
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
585540
3/4
20 52.5
5240
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE
UTILITY BALL VALVES, ANGLE TYPE
Fig. S5
Fig. S3
Fig. S4
Nickel-Chrome plated body, Long HandleMale (parallel) & Male Threaded ends to BS21
Long HandleMale (parallel) & Male Threaded ends to BS21
Nickel-Chrome plated bodyMale (parallel) & Male Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
594240
3/4
20543940
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFENBR
Dimensions mm
mm
inchNominal Size
LHD
314240
3/4
20 28.5
3940
1/2
15
UTILITY BALL VALVES, ANGLE TYPE
Fig. S52
Fig. S6
Male & Female Threaded ends to BS21
Nickel-Chrome plated body, For kerosene serviceMale (parallel) & Male Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
D
L
H
D
L
H
D
L
H
D
L
H
D
L
H
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
44 45
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
314240
3/4
20 28.5
3940
1/2
15
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
585540
3/4
20 52.5
5240
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrassDezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
585540
3/4
20 52.5
5240
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE
UTILITY BALL VALVES, ANGLE TYPE
Fig. S5
Fig. S3
Fig. S4
Nickel-Chrome plated body, Long HandleMale (parallel) & Male Threaded ends to BS21
Long HandleMale (parallel) & Male Threaded ends to BS21
Nickel-Chrome plated bodyMale (parallel) & Male Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass Dezincification Resistant BrassBrass*G/F PTFEEPDM
Dimensions mm
mm
inchNominal Size
LHD
594240
3/4
20543940
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
1.0 MPa water, -20ºC to +100ºC (Not Freezing)
MaterialsParts
BodyStemBallBall seatsO-ring
MaterialBrass (Nickel-chrome plated)Dezincification Resistant BrassBrass*G/F PTFENBR
Dimensions mm
mm
inchNominal Size
LHD
314240
3/4
20 28.5
3940
1/2
15
UTILITY BALL VALVES, ANGLE TYPE
Fig. S52
Fig. S6
Male & Female Threaded ends to BS21
Nickel-Chrome plated body, For kerosene serviceMale (parallel) & Male Threaded ends to BS21
UTILITY BALL VALVES, STRAIGHT TYPE
*Chrome or Nickel-chrome plated
D
L
H
D
L
H
D
L
H
D
L
H
D
L
H
D
H
L
H
L
D
H
L
D
Design feature of KITZ S Ball Valve, check valve built-in ball valves body.
Cross-sectional illustration of the check-valve-built-in ball valves
Compact design with a check valve built in the ball valve body.Prevention of reverse flow by automatic closing of the spring-loaded built-in check valve ( Water hammer proof ).Quarter turn operation with detachable handle for easy valve mounting or maintenance, and piping insulation.Direct installation of the valves to flexible pipes on the downstream side.
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
46 47
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrassDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
74516340
3/4
2072516340
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, 0ºC to +40ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveMale (parallel) & Male Threaded ends to BS21
Fig. S23N
Handle
Body
Cap
Ball seat
Ball
Check Valve
O-ring
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
74516340
3/4
2072516340
1/2
15
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
75516340
3/4
2073516340
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveMale (parallel) & Male Threaded ends to BS21
A Check Valve Built-in Ball ValveFemale & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Nickel-Chrome plated body
Fig. S24N
• Nickel-Chrome plated body
Fig. S25N
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
72.5516340
3/4
20 70.5
516340
1/2
15
A Check Valve Built-in Ball ValveMale (parallel) & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Nickel-Chrome plated body
Fig. S28N
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Attachment
2 Way Handle
D
L
H
FLOW FLOW
FLOW
FLOW
D
H
L
H
L
D
H
L
D
Design feature of KITZ S Ball Valve, check valve built-in ball valves body.
Cross-sectional illustration of the check-valve-built-in ball valves
Compact design with a check valve built in the ball valve body.Prevention of reverse flow by automatic closing of the spring-loaded built-in check valve ( Water hammer proof ).Quarter turn operation with detachable handle for easy valve mounting or maintenance, and piping insulation.Direct installation of the valves to flexible pipes on the downstream side.
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
46 47
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrassDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
74516340
3/4
2072516340
1/2
15
*Chrome or Nickel-chrome plated
1.0 MPa water, 0ºC to +40ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveMale (parallel) & Male Threaded ends to BS21
Fig. S23N
Handle
Body
Cap
Ball seat
Ball
Check Valve
O-ring
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
74516340
3/4
2072516340
1/2
15
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
75516340
3/4
2073516340
1/2
15
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveMale (parallel) & Male Threaded ends to BS21
A Check Valve Built-in Ball ValveFemale & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Nickel-Chrome plated body
Fig. S24N
• Nickel-Chrome plated body
Fig. S25N
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
72.5516340
3/4
20 70.5
516340
1/2
15
A Check Valve Built-in Ball ValveMale (parallel) & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Nickel-Chrome plated body
Fig. S28N
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Attachment
2 Way Handle
D
L
H
FLOW FLOW
FLOW
FLOW
D
H
L
H
L
D
Dimensions mm
mm
inchNominal Size
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
• Nickel-Chrome plated body
Fig. S24N - 3/4 x
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
48 49
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
73516340
3/4 x 1/2
20 x 15
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveMale (parallel) & Male Threaded ends to BS21
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAXMaterials
PartsBodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
A Check Valve Built-in Ball ValveMale (parallel) & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Nickel-Chrome plated body
Fig. S28N - 3/4 x
71.5516340
3/4 x 1/2
20 x 15
FLOW
FLOW
D
H
L
H
L
D
Dimensions mm
mm
inchNominal Size
MaterialsParts
BodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
• Nickel-Chrome plated body
Fig. S24N - 3/4 x
KITZ BRONZE & BRASS VALVESKITZ BRONZE & BRASS VALVES
48 49
Uti
lity
Ba
ll V
alv
es U
tility B
all V
alv
es
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
73516340
3/4 x 1/2
20 x 15
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
UTILITY BALL VALVES, STRAIGHT TYPE A Check Valve Built-in Ball ValveMale (parallel) & Male Threaded ends to BS21
Direct flow 40ºC MAX, Reverse flow 80ºC MAX
Direct flow 40ºC MAX, Reverse flow 80ºC MAXMaterials
PartsBodyStemBallBall seatsCheck valveO-ring
MaterialBrass: Nickel-chrome platedDezincification Resistant BrassBrass*PTFEPolyacetal + NBREPDM
*Chrome or Nickel-chrome plated
1.0 MPa clean water, 0ºC to +40ºC (Not Freezing)
Dimensions mm
mm
inchNominal Size
Add Attachment
LHHD
A Check Valve Built-in Ball ValveMale (parallel) & Female Threaded ends to BS21UTILITY BALL VALVES, STRAIGHT TYPE
• Nickel-Chrome plated body
Fig. S28N - 3/4 x
71.5516340
3/4 x 1/2
20 x 15
FLOW
FLOW
E-101=19
Printed in Japan 1306① ITP
Pressure-temperature ratings and other performance date published in this catalog have been developed from our design calculation, in-house testing, field reports provided by our customers and / or published official standards or specifications. They are good only to cover typical applications as a general guideline to users of KITZ products introduced in this catalog.
For any specific application, users are kindly requested to contact KITZ Corporation for technical advice, or to carry out their own study and evaluation for proving suitability of these products to such an application. Failure to follow this request could result in property damage and / or personal injury, for which we shall not be liable.
While this catalog has been compiled with the utmost care, we assume no responsibility for errors, impropriety or inadequacy. Any information provided in this catalog is subject to from-time-to-time change without notice for error rectification, product discontinuation, design modification, new product introduction or any other cause that KITZ Corporation considers necessary. This edition cancels all previous issues.
Read instruction manual carefully before use.
If any products designated as strategic material in the Foreign Exchange and Foreign Trade Law, Cabinet Order Concerning Control of Export Trade, Cabinet order Concerning Control of Foreign Exchange and other related laws and ordinances (“Foreign Exchange Laws”) are exported to any foreign country or countries, an export license issued by the Japanese Government will be required under the Foreign Exchange Laws.
Further, there may be cases where an export license issued by the government of the United States or other country will be required under the applicable export-related laws and ordinances in such relevant countries.
The contract shall become effective subject to that a relevant export license is obtained from the Japanese Government.