brochure simplifiee anglais · 2010-01-31 · The high pressure technology: • Compact design....

Compressors

Compression technology at your service

High quality reciprocating technology: • Dry (non lube) compressor technology

• Controlled lubrication technology matching process requirements and tolerances.

• API 618, 4th edition compressor design

• Pressure vessels according international codes as applicable

• Complete « plug and play » packages integrating control systems, gas regulation

equipments, and gas treatment equipments • Design of package going from basic processes as well as most difficult process ap-

plications. • Customized technical study of your project as soon as initiated • Optimized design based on a wide experience with hundreds of compressor pack-

ages operating in production sites from food industry to petrochemical industries, handling light and heavy gases

• Combined technology grouping a piston compressor line with diaphragm compres-

sor head at the final stage resulting in extra flow/pressure performance. • Easy maintenance mostly handled by the operators themselves

Burton Corblin Diaphragm compressors

Range of performance: • Inlet volume: 10 000 m3/h ( 5800 cfm) • Power: 1300 Kw ( 1743 hp) • Discharge pressure: 250 bar ( 3600 psi )

Company certified

Reliable heavy duty compressors

MAKE-UP & RECYCLE GAS BOOSTER Model P123HGG76/100/62 Poland

Combined make-up & recycle service on one compression system.

Gas : H2 & others Flow : 667 Nm3/h

Suction : 56 bar abs Discharge: 74 bar abs Absorbed power : 23 kW Motor : 37 kW

Typical features Compact skid mounted oil free compressor. Design according to customer’s and international requisitions ( ASME, NACE, ISO, CE marquing, Eex equipment…). Burton Corblin comply with API 618. Special construction for agressive environnement ( sandstorm, freezing/sea atmosphere...). Professional reputation worldwide thanks to reliable compressors running continuously on various applications.

GAS RECOVERY & PROCESS COMPRESSION Model P123HG260/200csh Poland

Gas : C2H4+H2S Flow : 607 Nm3/h

Suction : 1 bar abs Discharge: 61 bar abs Absorbed power : 39kW Motor : 55kW

Typical features Oil-free technology for a clean compression. Design according to customer’s specifications and international requisitions ( SQEL, GOST.R, NACE, ISO…). Burton Corblin comply with API 618. Flow regulation with step (25-50-75-100%) or progressive capacity control.

MOLECULAR SIEVE REGENERATION Model P207H300csh Lybia

Gas : HC Flow : 48019 Nm3/h

Suction: 31 bar abs Discharge: 38 bar abs Absorbed power: 400kW Motor : 726 kW

Typical features Burton Corblin provides a wide range of products fully adapted to this duty. Constructions API618, ASME, ISO... and customer’s specifications.

GAS TURBINE FEED Model P124H160s France

Gas : CH4 Flow : 11730 Nm3/h

Suction : variable 40 bar Discharge: 51 bar abs Absorbed power : 112kW Motor : 160kW

Typical features Fine regulation from 0 to 100% for a constant pressure level as required by the gas turbine. Burton Corblin control system can be integrated or not into the customer’s process control.

Typical installations… …. in key sectors

… and many other possibilities

The high pressure technology:

• Compact design. High pressure rise reached in few stages thanks to a de-

sign allowing high volumetric efficiencies

• Ability for keeping gas original cleanliness level. The compression cham-

ber is totally isolated. It proposes the most performing gas confining

technology. This ensures a contamination-free compression

• Ability for protecting compressor environment from a contamination by

the compressed gas thanks to its fully isolated chamber

• Safety system controlling the eventual rupture of one of the three dia-

phragms ensuring fluids confinement integrity

• Optimized design based on a wide experience with hundreds of compres-

sor packages operating in production sites, laboratories, handling light,

heavy, high purity, rare, toxic, flammable, corrosive, explosive, radioac-

tive gases…

• Customized technical analysis of your project as soon as initiated

• Complete « plug & play » packages integrating Burton Corblin control

systems, gas treatment equipments and regulation equipments

• Easy maintenance operations mostly handled by the operators

themselves

Burton Corblin Diaphragm compressors

Range of performance: • Inlet volume : 200 m3/h ( 117 cfm)

• Power : 250 kW ( 335 hp )

• Discharge pressure : 3000 bar (43500 psi)

Company certified


PTA PLANT Model D166LG2.5/10 China

Gas : H2 & O2 Flow : 390 Nm3/h


Typical features Contamination free compression keeping gas purity. Custom designs following customer & international requisi-tions ( ASME, ISO…). Burton Corblin masters international codes ( CE marquing, EEx...) and proposes specific design for particularly difficult conditions & environments ( sand-storm, explosive atmosphere..)

NEW DEVELOPMENTS Model D123LG16/63 Japan

Gas : H2 Flow : 53 Nm3/h


HIGH PRESSURE COMPRESSOR For gas boosting, tank/cylinder filling & transfilling applications. ( Fuel cell, air bag cartridge…) Extensive experience on high purity and high pressure hydrogen compressors up to 1000 bar.

HIGH SPEED COMPRESSOR MGV Compressor speed increased up to double of standard speed for bigger flow capacities, and new range of performances.

LEAK TIGHT COMPRESSOR Toxic, corrosive, dangerous gases Model D164LL1 South Korea

Gas : H2S Flow : 210 Nm3/h

Suction : 1.3 bar abs Discharge: 4.5 bar abs Absorbed power : 24kW Motor : 45 kW

Typical features Customized material selection according to the gas handled. Suitable for wet HCL and wet H2S ( NACE)... H.Corblin created the diaphragm compressor technology (1916). Burton Corblin is always recorded as being the specia-list for toxic (CO, NF3, NH3..), radioactives and hazardous gases . Reliable integrity detection system insure environmental pro-tection.

INDUSTRIAL GASES O2,N2,H2, Argon, medical gases... Model D123LGG1.6/5.5/25 China

Gas : Helium Flow : 62 Nm3/h

Suction : 2 bar abs Discharge: 254 bar abs Absorbed power : 21 kW Motor : 30 Kw

Typical features Up to 3 stages design on the same crankcase. Compression from 1 up to 600 bar. Compact skid mounted compressor. The triple diaphragm construction completely isolate the gas from the lubricated parts thus ensuring contamination free compression.

Burton Corblin presents today nearly one hundred years of world-wide professional experience with most of the market actors .



The Periflow® compressor is a technology of its own with performance charac-

teristics situated between those of volumetric displacement blowers and cen-

trifugal compressors

The technology allows

• Simple and compact design reaching a high pressure rise with low rotation

speed

• Adequate solution to process requirements. Start up under process pres-

sure, non stop operation. No risk of surge, no pulsation, no vibration

• Design with no dynamic seal

• Double and tandem mechanical seals for processes requiring the highest

performance

• Compatibility with pure, corrosive, explosive, flammable gases, mixtures

… and tolerance with foreign solid and liquid particles

• Savings on maintenance costs, installation budgets and reduced com-

pressor package dimension

Reduced instrumentation

• Low noise level without noise enclosure to stay within 85dB(A) at 1m ( in

free fled)

• Possible driving by variable speed electric motor or steam turbine

Compressor references in petrochemical industries (LLDPE, PP, PE), industrial

gases.

The Periflow® technology is approved and integrated by major contracting

companies and licensors in their process.

PERIFLOW® compressor .

Range of performance:

• Inlet volume : 6000 m3/h ( 3480 cfm)

• Power : 1000 kW ( 1340 hp)

•Pressure increase : 40 bar ( 580 psi)

Inlet static pressure up to 200 bar.

Company certified


GAS TURBINE FEED Model R-N310.1P.4G France

Gas : CH4 Flow : 650 Nm3/h

Suction : 1 bar abs Discharge: 2 bar abs Absorbed power : 43 kW Motor : 55 Kw

Typical features Starting under process pressure. Accept suction pressure fluctation. Doesn’t generate pulsa-tion. Direct drive. Variable speed electrical motor. Roller bearing mounted.

RECYCLE AND BOOSTING Model R-N525.2S.26 Sweden

Gas : N2 Flow : 15000 Nm3/h


Typical features Tolerate liquid and solid particules. Low rotating speed ( < 6000 rpm). Low vibration level. Low external noise level. Reduced maintenance. Roller bearing mounted.

RECYCLE COMPRESSOR FOR MOLECULAR SIEVE REGENERATION Model R-N600.1C.2G Netherland

Gas : Toluene+n2+co2+.. Flow : 3000 Nm

3/h


Typical features No risk of surge. Important capacity for a small dimension machine. Low rotating speed ( <6 000r pm) . Low vibration level. Low external noise level. No sophisticated lubrication system: grease or oil mist. Sealing by carbon ring or mechanical gas packing. Reduced maintenance.



Range of services

• A world wide network providing your local contact • Maintenance contracts • OEM spare parts • Compressor package expertise and up-grade • Parts and sub-assemblies repairs • Control and monitoring systems

Old compressors up grade, rehabilitation, and adaptation.

Assistance and maintenance on site by Burton Corblin site enginneers

Tools & Setting equipments. Components up grade.

Wear control systems. Maintenance tools.

Burton Corblin S.A.

Rue Roland Vachette B.P.80001 60181 Nogent-sur-oise FRANCE

Tel : +33 (0)33 44 74 41 00 Fax : +33 (0)33 44 71 72 43 Fax spares : +33 (0)33 44 74 41 14 E-mail : [email protected] [email protected]

Web : www.BurtonCorblin.fr

Ge

ne

rale

sim

plif

iee

001

re

v 0

-2

005

—D

ocum

en

t n

on c

ontr

actu

el—

R.C

. S

en

lis B

695

58

0 0

19

—C

réatio

n &

Ph

oto

s B

urt

on

Co

rblin

—Im

pre

ssio

n (

à d

éfin

irr)

brochure simplifiee anglais · 2010-01-31 · The high pressure technology: • Compact design....

Documents

Transcript of brochure simplifiee anglais · 2010-01-31 · The high pressure technology: • Compact design....