TUNE  YOUR  PLANT        B o t h   i n d u s t r y   a n d  colleges   need   PITOPSTM  to  make  prac;cal  process  control   applica;ons   easy  to  learn  and  apply.      PITOPSTM   is   the   control  engineer’s   toolbox.     It   is  like   a   screw-­‐driver   for   an  electrician.     PITOPSTM   is  the  only  control   soDware  you   will   need   in   the  control   room   or   college  for   designing   all   types   of  primary   and   advanced  control  schemes.      

PITOPS  

•  Increase  produc;on  rate  while  mee;ng  quality  requirements.  

•  Increase  process  stability  and  safety.  •  Reduce  raw  material  and    energy  consump;on  by  reducing  oscilla;ons.  

•  Increase  efficiency  and  effec;veness  of  process  control  engineers  and  technicians.  

•  Reduce  transi;on  ;mes  between  opera;ng  points,  and  as  such  produce  less  off-­‐quality  product.  

•  Benefit  from  low  total  cost  of  ownership  of  PITOPS  thanks  to  its  ease  of  use.  

•  Reduce  manual  opera;on  of  your  control  loops  to  save  ;me  and  reduce  varia;on.  

•  Increase  product  quality.  

Benefits  of  using  PITOPS  

PID  and  Advanced  Process  Control  Tuning  

“Our  engineers  have  been  using  PITOPS  for  almost  a  decade.    Many  of  them  say  and  feel  “We  cannot  live  without  PITOPS”.”  

Cheenu,  Manager  at  Sunoco  Oil  

“We  researched  various  tools  and  chose  PITOPS.    We  believe  PITOPS  is  the  easiest  and  fastest  tool  for  control  calcula@ons  and  tuning.”  

Sebas;en  Osta,    Engineer  at  BP  France  

“The  students  love  PITOPS  and  SIMCET.  They  helped  us  explain  process  control  concepts  beEer  than  ever  before.  And  best  of  all,  they  are  used  in  industry  too.”    

Professors  at  HCCS  College  

 Extraordinary  

high  ROI  

Process  Dynamics  Iden;fica;on  and  

info@yazzoom.com  www.yazzoom.com  

Tel/fax  +32  (0)53  39  77  10  

PiTOPS™  is  a  product  of  PiControl  Solu;ons  LLC  PiTOPS™    is  distributed  and  serviced  in  Europe  by  Yazzoom  ©  2013  All  Rights  Reserved  

 Short  Earn-­‐Back  period  Delivers  quan;fiable  benefits  with  typical  paybacks  ranging  from  a  few  weeks  to  a  year.    Easy  to  learn  and  use  PITOPS  works   en;rely   in   the   Time   Domain   and   is  easy  to  use  for  students,  engineers  and  technicians.  It   comes   with   12   step-­‐by-­‐step   procedures   that  illustrate   actual  DCS   controller   design   applica;ons  and  will  convert  you  into  a  master  prac;;oner.  

For  industry  and  college  Both   industry   and   colleges   need   PITOPS   to   make  prac;cal   process   control   applica;ons   easy   to   learn  and  apply.      For  very  slow  to  very  fast  control    With  PITOPS  you  can  build  simula;ons  to  mimic  any  process   in   just   a   few   minutes.   PITOPS   works   from  fast  millisecond  scan  ;mes  to  seconds,  minutes,  and  mul;ples  of  minutes.    For  any  DCS,  SCADA,  PLC  or  PI  system  PITOPS   will   iden;fy   the   process   characteris;cs   on  data   imported   from   any   DCS,   SCADA,   Produc;on  Informa;on  or  PLC  system  using  either  OPC  or  Excel.    Works  on  both  Live  and  Historical  data  PITOPS  can  use  either  closed-­‐loop  or  open-­‐loop  data.  You  do  not  need  to  take  your  PID  controller  in  manual  or  conduct  special  step  tests,  but  you  can  use  historical  data  from  normal  opera;on  to  iden;fy  the  process  dynamics,  disturbances  and  noise.    

PITOPS  

PITOPSTM  is  a  soNware  tool  for  Process  Dynamics  IdenOficaOon  as  well  as  PID  Tuning  and  Advanced  Process  Control  SimulaOon  and  OpOmizaOon.  

•  Handles   both   SISO   (single-­‐input,   single-­‐output)  and  mul;variable  control.  

•  Transfer   func;on   iden;fica;on   is   done  using  closed-­‐loop  data  or  open-­‐loop  data.  

•  Op;mal   P ID   parameters   a re   not  determined   based   on   heuris;c   methods,  but  based  on  precise  control  objec;ves  and  actual   process   characteris;cs   including  typical   disturbances,   noises   etc.   as  observed  in  the  real  process.  

•  Simultaneous   op;miza;on   of   Master   and  Slave  PID  loops  in  Cascade  control.  

•  Simulates   and   op;mizes   both   simple   PID  Control   and   Advanced   Process   Control  (APC)   techniques   like   Internal   Model  Control  (IMC)  and  Dead  Time  Compensated  Control  (DTC).  

•  Feedforward   Control   can   be   op;mized   in  conjunc;on  with  Feedback  Control.  

•  Can   take   into   account   non-­‐linear   process  behavior,  valve  characteris;cs  and  analyzer  PV  sample  delays.  

•  Simulates  and  op;mizes  gap  ac;on  control.  

Main  Features  of  PITOPS