Brochure f Cm Ceram Valve
Transcript of Brochure f Cm Ceram Valve
-
8/13/2019 Brochure f Cm Ceram Valve
1/6
-
8/13/2019 Brochure f Cm Ceram Valve
2/6
Ceram 4-way PneumaticDirectional Control ValveTough enough to survive, no matterwhere in the world you send it.The secrets a ceramic seal.
Inside the valve a pair of sliding ceramic plates form a nearly perfect, almost indestructible seal. Thenear diamond hard plates wipe themselves clean, shrugging off ingested dirt that destroys ordinary
valves. The ceramic plates are warranted for the life of the valve.
Extended life
Years of proven field service verifies an anticipated life
of 150 million cycles even under adverse conditions....
Just as tough with no lubricationThe Ceram valve is pre-lubed with grease. Its unique
ceramic plate wiping action prevents wear even with-
out line lubrication.
World standard ISO mountingISO 5599/1 mounting dimensions mean that wherever
you send it, its completely interchangeable with other
ISO valves anywhere in the world.
Standard electrical connections
The solenoid versions operate with either AC 50 or 60
HZ service or DC voltages, using continuous duty
plug-in solenoids with DIN 43 650 connectorsavailable anywhere. Lighted or non-lighted connec-
tors are options. The Ceram valve meets NEMA 4
electrical specifications.
Complete offeringFour basic valve sizes ISO 1 through 4 with subbases
and manifolds available for 1/4 through 1 in NPT or
ISO G(BSPP) ports. Manifolds can be end or bottom
ported with no special tie rods. Models include single
or double solenoid, and single or double air pilot.
Solenoids can be either internal or external pilot.
STAINLESS STEEL NEEDLEBEARING ASSEMBLY
PILOT CHAMBER & PISTON
STATIC CERAMIC PLATEDYNAMIC CERAMIC PLATE
SHOP AIR NEVERFLOWS ABOVECERAMIC PLATES
2 Features | Valve options | Accessories
Bosch Rexroth Corp. 2003
-
8/13/2019 Brochure f Cm Ceram Valve
3/6
Ceram valves fit the job.Choose the valve model thats right for your application. Ceram offers lots of choices other than thefour ISO sizes and solenoid vs. air pilot operation. You can have two or three-position (closed center
or exhaust open center) operation, even dual-pressure and vacuum operation if needed.
Complete offering
Available for
sizes 1and2.
End ported manifold
Available for all
sizes.
Bottom ported manifold
Available for all
sizes. Standardwith 1/2 con-duit housing and18 inch wireleads. VariousU.L. and NEMAapprovals.
Explosion proof solenoid operators
Available for allsizes. Electri-cally daisy-chainvalves for seriallink or fieldbusapplications.
Contact bridges for serial link
Available for allsizes. Two portsize choices forsizes 1 through3.
Single side ported subbase
Available for allsizes in 3,4 or 5pin in single so-lenoid, and 4 or5 pin in doublesolenoid.
Brad Harrisontype connectors
3
-
8/13/2019 Brochure f Cm Ceram Valve
4/6
Ceram valve accessories customized for your application.Everything pipes directly into the base, even remote piloted air signals. That makes it easy to addaccessories like flow controls or a regulator, or even a maintenance plate that allows a valve to be
serviced while the other valves on the manifold operate.
Accessories
Available for all
sizes. Adjust viascrew on eachside.
Sandwich flow controls
Available for
sizes 1 through3. Knob canlock in a givenposition.
Sandwich regulator
Available forsizes 1 through3. Provides twoseparate deliverypressures.
Dual pressure sandwich regulator
Available forsizes 1 through3. Allows ser-vicing of an indi-vidual valve in amanifold system.
Maintenance plate
Available forsizes 1 through3. Remote con-trol of all pres-sure settingsthroughout theselected range.
Remote pilot-operated regulator
Full line of 1/2conduit andstrain relief con-nectors for allvalve sizes.Lighted and non-lighted versions.
Plug-in solenoid connectors
4
-
8/13/2019 Brochure f Cm Ceram Valve
5/6
-
8/13/2019 Brochure f Cm Ceram Valve
6/6
2003 Bosch Rexroth Corporation
Bosch Rexroth CorporationPneumatics1953 Mercer RoadLexington, KY 40511-1021Telephone (859) 254-8031Facsimile (859) 254-4188www.boschrexroth-us.com
Factory Automation
Regional sales offices:
Central
Bosch Rexroth Corporation5150 Prairie Stone ParkwayHoffman Estates, IL 60192-3707Telephone (847) 645-3600Facsimile (847) 645-0804
Great Lakes
Bosch Rexroth Corporation1701 Harmon RoadAuburn Hills, MI 48326-1549
Telephone (248) 393-3330Facsimile (248) 393-2893
Northeast
Bosch Rexroth Corporation99 Rainbow RoadEast Grandby, CT 06026-0000Telephone (860) 844-8377Facsimile (860) 844-8595
Bosch Rexroth Corporation2315 City Line RoadBethlehem, PA 18017-2131Telephone (610) 694-8300Facsimile (610) 694-8467
SoutheastBosch Rexroth Corporation14001 South Lake DriveCharlotte, NC 28273-5544Telephone (704) 583-4338Facsimile (704) 583-0523
West
Bosch Rexroth Corporation11 GoddardIrvine, CA 92618-4600Telephone (949) 450-2777Facsimile (949) 450-2790
Bosch Rexroth CorporationService Automation5150 Prairie Stone ParkwayHoffman Estates, IL 60192-3707Telephone (847) 645-3600Facsimile (847) 645-0804
2315 City Line RoadBethlehem, PA 18017-2131Telephone (610) 694-8300Facsimile (610) 694-8467
Bosch Rexroth Corporation
Mobile Hydraulics145 Southchase BoulevardFountain Inn, SC 29644-9018Telephone (864) 967-2777Facsimile (864) 962-5338
International offices:
Asia:
China RussiaIndia SingaporeJapan South KoreaMalaysia
Australia
Europe:
Austria NetherlandsBelgium NorwayBulgaria Poland
Czech Republic PortugalDenmark RomaniaFinland SlovakiaFrance SpainGermany SwedenGreece SwitzerlandHungary TurkeyItaly Ukraine
United Kingdom
North America:
Canada United StatesMexico
South America:
Argentina Venezuela
Brazil
U.S. business unit offices:
Bosch Rexroth CorporationCorporate Headquarters5150 Prairie Stone ParkwayHoffman Estates, IL 60192-3707Telephone (847) 645-3600Facsimile (847) 645-0804
Bosch Rexroth CorporationIndustrial Hydraulics2315 City Line RoadBethlehem, PA 18017-2131Telephone (610) 694-8300
Facsimile (610) 694-8467
Bosch Rexroth CorporationElectric Drives and Controls5150 Prairie Stone ParkwayHoffman Estates, IL 60192-3707Telephone (847) 645-3600Facsimile (847) 645-6201
Bosch Rexroth CorporationLinear Motion andAssembly Technologies816 E. Third StreetBuchanan, MI 49107Telephone (269) 695-0151Facsimile (269) 695-5363
14001 South Lakes DriveCharlotte, NC 28273Telephone (800) 438-5983Facsimile (704) 583-0523