Advantages of Cold Applied Roofing Systems Name Position Title DERBIGUM.
Brochure DMS EN - Derbigum · IMPERBEL sa/nvBergensesteenweg 32 – B-1651 LOT v. 2019-01-15 Tél....
Transcript of Brochure DMS EN - Derbigum · IMPERBEL sa/nvBergensesteenweg 32 – B-1651 LOT v. 2019-01-15 Tél....
DERBIGUM® DMS
DERBIGUM®
English version
All-round
The First Aid kit for your roof
Derbigum DMS is a multipurpose product for the waterproofi ng of details and upstands, and the cold bonding of overlaps and roofi ng.
Perfect for the execution of small roofs without the use of a fl ame ; for larger roofs, ideal in combination with the bituminous cold adhesive Derbibond® NT.
This two-component adhesive offers a complete, perfect and durable fi nish. 100% fl ame-free.
User-friendly
The perfect mix in no time
With more than 85 years of experience in the production and sale of cold adhesive, Derbigum knows more than anybody that the use of a product on a jobsite must be simple and easy.
The components of Derbigum DMS are therefore pre-measured for a perfect mix, without weighing.
The opening time is adapted to real jobsite conditions, providing a rational consumption without wasting product.
Perfect result
Versatile use
The excellent utilization, the quick drying time and the strength of the end result make Derbigum DMS the outstanding choice for the fi nish and execution of :
• Details• Upstands• Overlaps• Temporary waterproofi ng and/or
vapour barrier• Bonding of insulation panels• Levelling• Bonding of waterproofi ng
membranes• All kinds of small repairs
Ecological
Natural
Derbigum DMS is a bituminous, two-component cold adhesive that is ecologically based. It contains no solvents (VOC’s) and only vegetal oils were used. The fi llers are also of vegetal origin.
The cleaning of the application material can be done ecologically with Derbiclean NT, the biodegradable cleaner of Derbigum. This has to be done immediately after use.
100
%
FLAME-FREE
Ready, steady, go !
The perfect mixture in no time
5 minutes maximum, that is all you need to mix the components and get a ready-to-use product.
Derbigum DMS consists of 3 components : A, B and C
• Component A offers the waterproofing
• Component B offers reaction speed• Component C offers viscosity to the
mixture
The mixture of Component A+B is used for the following jobs:
• Temporary waterproofing and/or vapour barrier
• Bonding of insulation panels (fully bonded)
• Bonding of waterproofing membranes
The mixture of Component A+B+C is used for the following jobs, 100% flame-free:
• Details • Upstands• Overlaps• Bonding of insulation panels
(in stripes)• Levelling• All kinds of small repairs
Mix, with an electrical mixer Component A into a homogeneous mass.
Mix, with an electrical mixer Component A with Component B.
Add Component C (fibres) to the mixture of Component A+B and mix with an electrical mixer until the fibres are no longer visible.
Step 1
1 min
Step 2
2 min
Step 3
2 min
v. 2
019-
01-1
5
IMPERBEL sa/nvBergensesteenweg 32 – B-1651 LOTTél. +32 2 334 87 00 E-mail: [email protected]
Derbigum aims to be the reference provider
of sustainable solutions that safeguard buildings
from the elements of nature.