Brochure

Company Profile

Fastron Electronics is a privately owned company based in Melbourne, Australia specialising in the Manufacturing and supply of Components, Products and Solutions to the Energy Monitoring, Power Electronics, Power Quality, Process Control, E­Mobility, and Electrical Instrumentation markets.

We Are:Manufacturers, importers, design/development and consulting engineers in electrical, 

electronic and systems solution disciplines.

Fastron's expertise reflects up to 40 years experience in:

•Power Control, Process Control & Automation•Switchgear (LV,MV,HV)•Power Electronics Components & Assemblies•Heatsink and Cooling•Energy Management•Electrical Measurement & Test•Electrical Protection•Power Quality •E­Mobility

Our Mission:• To select the most suitable components, products or engineered solutions to meet and potentially exceed our customers requirements in an unbiased and professional manner.• To be actively involved in improving the reliability and energy efficiency of power conversion equipment, temperature and electric heating controls.• To promote Energy Monitoring and Management solutions as the means to benchmark, measure and reduce energy waste, reduce costs and CO2 emissions.

Brochure Process Control

1

Temperature/Humiditiy Controllers

Industrial Temperature & Humidity Sensors  

Timers, Time Relays,Time Switches, Monitoring Relays

Panel Mount ­ 48x48mm, 96x48mm, 

48x96mm, 72x72mm, 96x96mm

Din Rail Mount ­ 22.5 x 75mm Dual Input/Dual 

Output options, 5 Amp Relay Alarm Output

Dual Input and Dual Output versions

Step Control ­ Included as standard 

Pattern/Kiln Controllers ­ Up to 10 Steps, 10 

Patterns

HVAC/Brewery/Servo/Valve ­ Low Cost SCR 

Controllers with integrated PID loop

CE and UL

MIMS Resistance Temperature Detector 

(RTD) ­ Standard ranges in stock

MIMS Thermocouples ­ Type K,Type R,Type S 

(stocked)

EGT Sensors ­ Inconel 600 (Stocked)

Plastic Industry ­ Type K with two pin Bayonet 

fitting (Stocked)

Pipe/Clamp style ­ Made to order

Machine/Bolt Style ­ Type K (Made to order)

Accessories ­  BSP, Bayonet, Flange Fittings, 

TC Cable

Virtually any style made to order

CE, ANSI and ROHS

Analogue ­ Single and Dual, Multifunction, 

Delay ON/OFF, Assymetric, Staircase, Double 

Delay, Memory, Latching, Delay On Star Delta

Digital Time Switch ­ Daily/Weekly, Monthly, 

Yearly, Dual and Astronomical Types with 100 

Programs and Removable Battery

Digital Timers ­ Single and Dual Output Types, 

9999 Hr timing range.Monitoring/Control Relays ­ AC/DC Voltage, Current, Frequency, Level, Light, TemperatureTwilight Switch ­ Digital or Analogue Timing

CE/UL

Brochure Process Control

2

Programmable Logic Controllers & HMI Touch Screens

Signal Conditioners/Transmitters/Transducers

Motors, Starter Motors, Alternators, Encoders

Miniature PLC ­ Din Rail Mount, 3 Ranges with 

various Conficurations, Millenium 3, Millenium 

EVO, EM4

I/O ­ 10/12 Input 4 Output, 14 Input 10 Output 

Expandable to a maximum of 54 I/O

Communcation ­ RS485, Ethernet, Bluetooth, 

3G, Wifi

HMI Touch Screen ­ Essential ( 4 or 7 Inch & 

Dual RS485 Comms), Performance ( 4,7 or 10 

Inch Ethernet & RS485 included VNC Server)CE/UL ROHS

Voltage & Phase Moitoring Relays ­ High 

performance, and low cost types

Current Monitoring Relays ­ Single and 3 

Phase, AC & DC Custom made types available

Speed Monitoring Relays ­ For Motor Speed 

Monitoring and Control

Motor Protection Relays ­ Mechanical Circuit 

Breakers (Thermal or Thermal and Magnetic)

Tank Level Control Relays ­ Low cost

Signal Condtioners/Transmitters ­ Process 

Levels or AC/DC Current/Voltages

Oil Pressure/Temperature Transducers ­ For 

Compressors or ChillersCE/UL

Motor Contactors ­ DIN Rail Mount AC/DC 

Motor Contactors, DC PWM Rated Contactors 

(up to IP67K), Aviation and Milspec types

E Bike Systems ­ For up to 250W, with HMI, 

Smartphone Applications, Tube Batteries

Encoders ­ State of the art industrial 

postitoning and speed encoders for utilities 

Electric Motors ­ Starter Motors, AC & DC 

Motors, Alternators, BLP Motors, and Electrical 

Drives and Replacement Spare PartsMotor Protection Circuit Breakers ­ Thermal or Thermal & Magnetic Release              CE/UL

Brochure Power Control & Power Quality

3

Phase Angle/Burst SCR Power Controllers

Power Factor Correction  

EMC Filters, Chokes, Pulse Transformers & IEC Inlets

Premium SCR Controllers  ­ AE(AEG)Thyro 

S, Thyro A, Thyro AX, Thyro PX

 U,U², I,I², P,P² Modes with Sync & Comms

Din Rail Mount ­ SCR and SSR Based models

100% Australian Made ­ Oztherm F330, F430, 

F431, F311, F312 Series. Customisable

Voltage Regulators ­ SSR based Proportional 

Single and 3 Phase

HVAC Controllers ­ SSR and SCR Based, 

PWM Controller, Compact with Display

Power Factor Correction Capacitors ­ Singe 

Phase and 3 Phase 440/525V 5 kVar to 40 kVar 

Dry Type kept in stock, Gas Filled and Dry Type

Power Factor Correction Controllers up to 12 

Steps, Basic and Logging types

Capacitor Duty Contactors ­ 12 kVar to 50 

kVar with Aux Contacts kept in stock 

Smart Capacitor Banks ­ 100% Australian 

Made up to 600kVar with low lead time

Power Quality Meters and Transducers ­ 

Panel Mount, DIN Rail, Iot Loggers with Email 

and Relay Alarms, and in built Web PageCE, ANSI and ROHS

EMC(RFI) Line FIlters ­ Single and 3 Phase, 1 

and 2 Stage, Low Leakage, Medical Grade, 

Assymetric and Symmetric Attenuation

IEC Inlets ­ With or Without EMC(RFI) Filter, 

Fuse(s), Switch or Illumination

Chokes ­ Limited Range of Chokes for Line 

Attenuation 

Pulse Transformers ­ For optimum low EMC 

switching of devices.Appliance Fuses & Fuse Holders ­ Time Lag (Slow Blow), Fast Acting types up to 30 Amp.CE/UL

Brochure  Electronic Components

4

Power Capacitors

Power Semiconductors

Solid State Relays

Low Voltage Power Factor Correction 

Capacitors ­ 440/525VAC 5kVar to 50kVar 

types with triples safety feature. 

Medium Voltage ­ 22kV, 400kVar capacitors 

made to order for indoor or outdoor use

Induction Heating ­ All Types Made to order

Snubber/Absorbtion (Kondensator) ­ 

Railways grade, standard and custom made 

types DC Link and Electrolytic ­ Project qty's on requestCE/UL/ROHS

Bridge Rectifiers ­ Single and 3 Phase, Half  

Controlled, Braking Diode, Welder Types

Isolated Power Modules ­ Diodes, SCR's, 

Hybrid, IGBT's, Fast and Standard Types

Stud Mount Devices ­ Metric and Imperial 

Diodes, SCR's, Flat Base, Rotating, Fast and 

Standard Types

Capsule (PUK) Devices ­ Diodes, SCR's, 

GTO's, Fast and Standard Types.

Press Fit Diodes ­ Diode Pellets, Welding 

Diode Capsules, Press Fit (Button) Diodes

Part Cross Reference & Alternative 

  Sourcing Specialist

  CE/UL/ROHS

DIN Rail Mount ­ AC or DC Control, AC or DC 

Switching types with heatsink 

Panel Mount ­ AC or DC Control, AC or DC 

Switching types for mounting onto heatsink

Solid State Contactors ­ For Single and 3 

Phase Heatsink Applications

Solid State Motor Contactors ­ 3 Phase, 7.6, 

and 18/20 Amps Forward and Reversing Types

PCB Mount SSR's ­ SIP, 5 Pin Socket, and 

Input/Output Modules 5 Pin Socket Mount ­ For Standard Relay SocketsCE/UL & ROHS

Brochure Electronic Components

5

Industrial Current & Voltage Transducers

Solid State Contactors

Power Supplies

Current Sensors with Process Outputs ­ Compact Designs for Process Automation, Data Logging, and Control SystemsSolid and Split Core Current Sensors ­Busbar Mount, Panel Mount, DIN Rail MountAC/DC Current and Voltage Sensors ­ Bidirectional Instantaneous, and Signal Conditioned TypesHigh Isolation & Operating Ranges ­ MV Isolated Voltage or Measurement up to 6.4kV, 20,000 Amp AC or DCCE/UL/ROHS

Natural and Fan Cooled ­ Contactor Output Ratings @ 50 Deg C AmbientVarious Control Input Types ­ 24VAC, 3­32VDC, or 90­280VACWide Range of Load Current/Voltage ­ 24­660VAC, 13­500 Amp Single or 3 Phase Two SSR Configurations ­ Solid State Relay or Contactor Style ModulesCrydom or Fastron SSR ­ Crydom for UL requirement, or Fastron lower cost SSR for CE RequirementCustom and Standard Models Available ­ To suit customer requirements, available spaceCE/UL/ROHS

Din Rail Mount ­ Plastic or metal framed typesOpen Frame ­ Open Frame OEM style, Bipolar Power Supplies ­ To suit LEM or other Hall Effect Sensors and TransucersPlug Packs ­ Convenient GPO Mounted Plug Pack StylePanel Mount ­ Available on RequestCustom Power Supplies ­ Available on Request AC to DC Rectifiers ­ Custom made on request for heavy industrial applications and retrofitControlled Rectifiers ­ For ElectrolysisCE/UL/ROHS

Brochure

6

Revenue Grade Utility, ICG, Tariff Meters

Power, Current, Voltage Meters

Calibration and Compliance

Revenue Meters ­ Single and 3 Phase (ME172 & ME174), with TOU, RS485, Optical Port, Extended Load Profile, PV Friendly, Import/Export, "No power reading" funtionality, Optional Digital I/O, 5 Years backup, Tarriff Schemes, up to 120 Amp direct connectSmart Meter ­ AM550 DLMS 0/1 Supported, M­Bus (wried or wireless), SSR/Relay Output options, Supercap or removable batteryICG Meters ­ MT880/MT860 Industrial Power Quality Meter, and Tarriff MeterNMI Pattern Approved

Digital Voltmeters and Ammeters ­ Wide 

range of input options, CT Current, 4­20mA 

inputs with optional Relay Alarms and 

Retransmission output. Dual Display and LCD 

(non backlit) options. Up to 600VAC/DC

Analogue Voltmeters and Ammeters ­ Direct 

or CT Connected, Dual Paramater, Voltage 

Ranges up to 690VAC/DC 

Hour Meters ­ Round or Square faced with 

various cutout sizes, IP54Indicators ­ Temperature or Proportional scalable indicators with Red/Green or White/green LED DisplaysCE and UL

Portable Meters ­ Clamp Meters, Multimeters, 

Power Quality Analyser/Logger, Thermometer

High Precisions Current Sensors ­ For 

Compliance or Medcial equipment

Synchronometers ­ For monitoring and control 

of Gas/Diesel gensets

Hand Held Clamp on Current Sensors ­ For 

testing and analysis purposes

High Precision Potentiometers ­ For high 

precision test and calibration equipment

Power Semicondutor Testers ­ Portable,  

Laboratory, or Production Line modelsCE and UL

Test And Measurement

Brochure Test And Measurement

7

Railway Current and Voltage 

Power Meters & Power Quality Analysers

Current Transformers  

Hall Effect Current Transducers ­ AC and DC 

Measurement 0­5V, +/­4V, Rm(Current) outputs

Hall Effect Voltage Transducers ­ AC and DC 

Low and Medium Voltage Measurement 0­5V, 

+/­4V, Rm(Current) outputs

Signal Conditioned Transducers ­ Standard 

process outputs

Differential Current Transducer ­ For earth 

leakage measurement devices

CE and UL

kWh Submeters ­ kWh Meters, Network 

Recorders, Network Analysers, Power Quality 

Analysers, Class 0.1 to Class 1 with Various 

Comms, Din Rail and Panel Mount

Current Transformer ­ Direct, 0.333V, 1/5 Amp

Modular kWh Meters ­ Major Cost and space 

savings

EV Charger Meters ­ AC, and DC Meters with 

PTB (Eichrect) CertificationNetwork Recorders ­ Wide range of Input Options Galvanic Isolation, Process OutputsPower Quality Analysers ­ Class ACE/UL

Solid Core Current Transformers ­ Class 

0.2(S), 0.5(S), 1, moulded style

Split Core Current Transformers ­ Clip, Snap, 

Screw on and busbar mount styles, 

encapsulated and moulded types

Signal Conditioned Output ­ Solid and Split 

Core ranges

Rogowski Coils ­ Class 1 and Class 0.5, True 

RMS condtioned output, adjustable sensitivity

Hand Held Clamp on Current Sensors ­ For 

testing and analysis purposesOutput Standards ­ 0.333V, 1/5 Amp, or Custom models on requestCE, ANSI and ROHS

Brochure Switching Technology

8

Mechanical Relays & Bistable Switches

Contactors

Switches for HMI and Appliances

Subminiature Relays ­ PCB or DIN Rail Mount with large flat pins Single Pole 5 Pin 1 x 12 Amp SPDT Form CTwo Pole 8 Pin 2 x 10 Amps (DPDT) Form CFour Pole 14 Pin 4 x 5 Amp SPDT Form CLatched Relays/Bistable Switches ­  Position Indicator, No Hold Consumption, up to 80 Amp Ratings, Manual Switch, Modbus BiCom Versions Slim Relays ­ PCB or DIn Rail Mount with 12­24VAC/DC or 240VAC InputsRelays Bases ­ Sold SeperatelyCE/UL and ROHS

Din Rail Mount Contactors ­ Ratings up to 1100 Amp Per Phase, Motor Duty ContactorsControl Input Ranges ­ 24VAC, 24VDC, 415VAC, 240VAC, 220VDC Capacitor Duty Contactors ­ For Extremely High Inductive or Capacitive LoadsThermal Overload Relays ­ Adjustable type for Mounted on Contactor Output ContactsAuxilliary Contacts ­ Snap on Single or Multi PoleHermetially Sealed Types ­ IP67K, PWM Rated Coils, Designed for DC & AC LoadsMilspec & Aviation ­ High reliability versions for Military, Electric Vehicle and Aviation MarketsCE/UL and ROHS 

Thermal & Magnetic Circuit Breakers ­ Manual and Automatic Reset Types, Optional Aux Contact, Various Mounting Types, Ratings up to 16 Amp, 28VDCThermoplastic Membrane Switches ­ HMI User Panels, Low Resistance, 48VDC 100mA, Standard and Custom Printed Versions   Piezo Switches ­ Metal Line, Touch Sensitive, 48VDC 100mA, Long Life, Ring, Point or Button Illuminated and Standard/Custom Engraved Metal Line Switches ­ Switches with Latching or Non Latching Relay, 240VAC, 10 Amp, Illuminated or Standard/Custom EngravedRocker Switch ­ Thermal Breaker, Illuminated, Non Illuminated, Latched, Optional CoversCE/UL and ROHS

Brochure Electrical Protection

9

Semiconductor and Solar Fuses

Surge Protection Devices

Electrical Wholesale Components

BS88 Fuse Links (aR) ­ Most Popular models 

kept in stock up to 700 Amp with mounting kits

Cartridge Fuses (gR) ­ versions

NH European Style Fuses (aR,gG) ­ 78mm, 

108mm Bussmann Equivlents 

Appliance Fuses ­ Time Lag (Slow Blow) and 

Solar Fuses (gPV, Type J) ­ 10.3x38mm 

Ratings for 1000VDC, 275VAC, 1 to 50 Amp 

Fuse Holders and Standoffs ­ Din Rail 

(Cartridge) and Panel Mount (NH, BS88)CE/UL and ROHS

Metal Oxide Varistors(MOV) ­ Up to 680VAC 

kept in stock (1100VAC on request)

GDT's

Surge Protection Devices(SPD) ­ Main/Sub 

Boards versions, 1, 2 and 3 Pole modular 

options, Type 1, 2/ B, C Class I, II. MOV and 

GDT, L/N­PE, L­PEN, L­N, L­PE

Snubber Capacitors ­ LV to MV Range, 

Railway Grade, High Overload, AC and DC 

Thermal Ciruit Breakers ­ HMI Appliances

Transient Supression Resistors ­ For 

continuous voltage clamping in drives

Low Voltage Switchgear ­ See Next Category

CE/UL and ROHS

Moulded Case Circuit Breakers (MCCB) ­ 

Ratings for 690VAC and 1250 Amp, Fixed, 

Adjustable, and Electronic Types

Circuit Breakers (MCB) ­ AC Types 1 to 120 

Amp 230/400VAC Rated, DC Types 1 to 63 

Amp 400VDC Rated

Twilight Switches ­ Timers with light detection

Residual Current Circuit Breakers (RCD) ­ 

100 Amp 230/400VAC Rated

Residual Circuit Breakers with Overcurrent 

Detection (RCBO) ­ 40 Amp, 230/400VAC

Disconnect Switches ­ For Solar or Industry 

Busbar Systems ­ To suit our range

Enclosures ­ 4 to 36 DIN, IP65/40

CE/VDE/GHOST

Brochure New Technologies & Projects

10

Communication Accessories

E­Mobility & Renewables

Industrial Communication Gateways ­ 

RS485, Ethernet, RS232, USB Converters

Remote Web Server Datalogger ­ Mini web 

server with 1 or 8GB storage

Remote Alarming System ­ Email, Digital or 

Relay Output remote Alarming Devices.

Thyro Series Anybus Interface ­ Profibus, 

Profinet,EthernetIP,EtherCAT,Modbus RTU

Energy Management Software ­ Fastron Ergo 

and Iskra Miqen scaleable software system.CE and UL

Home EV Charger (AC) ­ Standard ranges up 

to 22kW 3 Phase or BiPhase

Public EV Charger (DC) ­ 160kW versions for 

Rapid Charging Networks

EV Charging Systems ­ Secure EV Charging, 

Payment and Notification System

Hall Effect Current Sensors ­ Dual 

Range(DHAB), and Can Bus Types(CAB)

Automotive gR Fuses ­ Ratings up to 200 

Amp 60VDC with Enclosed Fuse Holders

Gigavac DC Contactors ­ 1000 Amp and 90kV 

Ratings IP67

CE, ANSI and ROHS

Project/Manufacturing CapabilitiesRectifier Design ­ Forward/reversing types

DC Subsation Blocking Diodes ­ Proven 

Railway Designs with redundancy

Rectifer Exciter Cubicles ­ Power stations

Power Factor Correction Capacitor Banks ­ 

100kVAr ­ 600kVar

Snubber Panels ­ Supression Panels

Heating Control Cubicles ­ SCR Controller, 

Contactor, Relay, PID Controller Systems

PLC Systems ­  Custom PLC Projects using 

Crouzet Automation min PLC, 54 I/O Maximum

Metering Panels ­ Design and 

assembly or kitting

Cooling AccessoriesFans for Heatsink ­ Ballbearing Fans for standard heatsink sizes 60x60mm, 80x80mm, 92x92mm, 120x120mm, 150x150mmFan Cooled Heatsink ­ Various sizes for almost any application, 117 x 150mm, 117 x 168mm, 125x125mm.Thermal Paste for Heatsink ­ Wolfracoat C Conductive lubricating paste 400gm and 1.2kg, and small non conductive paste packsThermal Bimetal Switches ­ Normally Open or Normally Closed, 70 to 150 Deg CDouble and Single Sided ClampsClamps for Capsule Devices ­ Insulated, Double Sided and Single Sided (Box Clamp)Water Coolers ­ For Isolated Modulesor Capsule Devices

Brochure Cooling & Assemblies

11

Heatsink

Semiconductor Assemblies  

Extruded ­ Most popular styles kept in stock 

and made to order.

High Dissipation ­ Bonded and extruded 

types, single and double sided

Din Rail or Panel Mount ­ For all types of 

semiconductor mounting

Fan Cooled ­ For 92mm,120mm,150mm fans

Water Cooled ­ Various configurations for 

extreme applicationsMachining Services ­ MIlling, drilling, alodining Heatsink Design ­ Custom heatsink 

Bridge Rectifiers ­ Single, 3 Phase, 6 or 12 

Pulse with or without IPT Transformer

Blocking Diodes ­ For Datacenter Online 

Protection, Substation Fault Protection

Water Cooled ­ For welders, or extremely 

demanding applications

Button/Pellet Diode Assemblies ­ Air 

Cooled ,Low Cost, Up to 

AC Switches ­ For ON/OFF or Phase Control 

of extremely high powered applications

High Voltage Diode Arrays ­ For Electrostatic 

Precipitators or similar.

CE, ANSI and ROHS

Brochure

Expect Nothing Less than the Best!

For specific or general enquiries, please contact our friendly sales team 

BRIDGE RECTIFIERS - Single and Three Phase PULSE TRANSFORMERS - PCB type, leaded and SMD

CHOKES - Line, RFI, EMC SCR / DIODE BRIDGES - Single / Three Phase

DIODES - Std., Fast. (Stud, Puk, Module) - Half / Full Control

FANS/ACCESSORIES - AC/DC to 150mm dia. SOLID STATE RELAYS - AC & DC Input / Output

FILTERS - Line, RFI, EMC - PCB & Module Type

FUSES - Semiconductor Protection THYRISTORS - Std., Fast (Stud, Puk, Module)

HEAT SINK - Extruded, Cast & Fabricated SCR / DIODE MODULES - Std., Fast

types machined to order

IGBT's - 1, 2 & 6 pack modules VARISTORS - High power module type, versions

POWER CAPACITORS - Power, PFC, DC Link and Electrolytic types with thermal disconnect

SMART RELAYS - Millenium EVO 24 I/O Programable Relays PROGRAMABLE LOGIC - Crouzet 26 I/O, Compact, Blind,

CONTROLLERS(PLC) Expanadable 3G, Bluetooth versions

PROCESS CONTROLLERS - Pressure, R. Humidity, other.

HMI TOUCH SCREENS - Ethernet, Modbus, 4,7,10 Inch

ELECTRICITY METERS - I, V, kW, kWh, kvar, kvarh, PF,

Freq, THD, Pulse, Comms, Load Shedding TEMP. CONTROLLERS - Shinko, Single / Multi-Point

- Panel & Din Mount Type - Pattern Control

CURRENT TRIP MODULES - Measurement / Alarm SENSOR POWER SUPPLY - +/- 15v for Hall Effect Sensors

LOOP POWER SUPPLIES - Process type, 24V/ 4 - 20mA TEMPERATURE TRANSMTR - Thermocouple / RTD

MONITORING RELAYS - V, I, Watts, Temp, Level etc. VOLTAGE TRIP MODULES - Measurement / AlarmSIGNAL CONDITIONERS - DC/AC, I/V, Trip/Reset and Alarms

CURRENT AC / DC - Hall Effect Sensors, CT types RELATIVE HUMIDITY - Room/Duct SensorsDCCT's - Hall Effect Sensors TEMPERATURE - Thermocouples, RTD's, Infra-RedLEVEL - Paddle Switch Type VOLTAGE AC / DC - Hall Effect Sensors, VT typesPOWER (kW, kWh, kVa,kVarh) - Process Level O/P and Pulse - Oztherm (Fastron in-house design)

HEAT SINK ASSEMBLIES - AC, Single/ 3 Phase & WATER COOLERS - Non-isolated & Isolated

multi-phase water path

- DC Bridge and DC switch SEMICONDUCTOR CLAMPS - Single and Double sided

- Convection, Fan forced, SNUBBERS - AC Single / 3 Phase / DC

oil or water cooled DC SUBSTATION DIODES - Blocking Diode Cubicles

SOLID STATE CONTACTORS - AC/DC Input or Output THYRISTOR CONTROLLER - Single & 3 Phase- Single, 3 Phase (SCR) - Phase Angle, Burst Control- Solid State Relay & - OZtherm Brand Thyristor Types. (Fastron in-house design)

ENERGY MONITORING - Ergo Energy monitoring software DATA ACQUISITION - Electrical and Process Parameters

- Cloud or local data collection options

- Real-time monitoring and profiling TEMPERATURE MONITORING - Single and Multi-point

- Wi-Lem Wireless Energy Moitoring & CONTROL - Pattern Control

- Crouzet Smartphone PLC app

DATA LOGGING - Historical Analysis

POWER QUALITY - RS485 MOBUS / Ethernet TCP/IP Comms - Trending & Reporting

- Power Quality Analysers, MiQEN and

MiSMART software. POWER FACTOR -Smart Capacitor Bank, Substations

ABN: 38 622 808 137

Email: sales@fastron.com.au Web: www.fastron.com.au

ENERGY MONITORING, POWER ELECTRONICS AND AUTOMATION

# PROGRAMABLE LOGIC CONTROLLERS, HMI TOUCH SCREENS, TEMPERATURE, HUMIDITY, AND LIGHT SENSORS # PRODUCT DESIGN AND DEVELOPMENT; CONTROL CUBICLE DESIGN, ASSEMBLY AND TESTING # APPLICATIONS ENGINEERING AND CONSULTANCY # POWER SEMICONDUCTOR REPLACEMENT; TESTING AND MATCHING TO CRITICAL PARAMETERS

# ENERGY MONITORING, POWER QUALITY, DATA AQUISITION, ELECTRICAL & PROCESS MEASUREMENT SOLUTIONS

9B Lakewood Blvd Braeside Tel: +61-3-9763 5155 Victoria, Australia 3195 Fax: +61-3-9763 5206

# REPAIR & REFURBISHMENT OF SEMICONDUCTOR ASSEMBLIES & POWER ELECTRONIC EQUIPMENT # REPAIR, TESTING, UPGRADE AND TRAINING ON ALL PRODUCTS

PRODUCTS AND SERVICES

SYSTEMS SOLUTIONS & ENGINEERING SERVICES

SOLUTIONS

SOLID STATE SWITCHES AND POWER CONTROLLERS

POWER SEMICONDUCTOR HEAT-SINK ASSEMBLIESAND ACCESSORIES

SENSORS / PROBES / TRANSDUCERS

POWER SUPPLIES / SIGNAL CONDITIONERS / MONITORING RELAYS

AUTOMATION / INSTRUMENTS / PROCESS CONTROLLERS

POWER ELECTRONIC COMPONENTS

Digital Power Meters, Digital Panel Meters, Isolated Transmitters, Transducers, Converters, I/O Controllers, Current Shunts and Current Transformers.

Monitoring Relays, Programmable Logic Controllers(PLC), Smart Relays, HMI Touch Screens, Encoders, Brushless DC Motors, Motor Controllers, Smartphone/Tablet PLC apps, Solenoid/Valve Switches

PID Temperature/Humidity Controllers, Sensors (ANSI, CE, ROHS), Mechanical Relays (UL,CE,ROHS), Solid State Relays(CE,PICC), Solid State Contactors, Split Core Currrent Transformers(UL, CE), aR NH, BS88, SCR Power Controllers, Voltage Regulators, Power Factor Capacitor Banks, Static Var Compensators

DC Contactors for Automotive, Renwables, Aviation, and Military Industries, High Voltage, High Current, PWM Rated, Hermetically Sealed (IP67K, UL, CE)

Thyro S, Thyro A, Thyro AX, Thyro PX SCR Power Controllers with Profibus, Rockwell Support, Precison High Voltage Power Supplies, Precision Low Current Power Supplies, Phototonic Sensors, Pyrometers

Discretes, IGBTs, Power Modules, Bridge Rectifiers & AC Controllers, Thyristor and Diode modules, Specialist Semiconductors including Silicone carbide

IGBTs, Power Modules, Bridge Rectifiers & AC Controllers, Thyristor and Diode modules, IGBT driver boards, Stacks and Assemblies.

Monitoring, Control and Measurement of electrical parameters related to Energy Monitoring and Power Quality including Power Factor Correction products. Single and 3 phase Energy Meters, Measuring Centres and Network Analyzers with MiQEN and MiSMART software; Measuring Transducers. MV and LV, PFC capacitors and contactors. DC Link capacitors. Synchronisation Meters.

EV Chargers, AC (up to 22kW) or DC(up to 160kW), with Smart Phone Support, Security and Alarm Features, Billing Management Software, Smart Card (NFC) Access, Public Charger Software Framework.

Power Capacitors for Critical Applications and Extreme Environments such as Railways including Snubber Energy Absorbers (Kondensator), High end Electrolytic Capacitors (Audio, Automotive).

Voltage & Current Transducers for industrial drives, robots & cranes, cable cars & ski lifts, elevators & escalators, ventilation & conditioning, medical systems and power supplies for computer & mobile systems. Rogowski Coils, Battery Monitoring system and Wi-Lem Energy Monitoring Solutions.

Rope CT's, Rogowski Coils with Integrators, Standalone Integrators, Teardrop Coils, Standard CT's, Pulse CT's, Hall Effect CT's, Signal Conditioners, Voltage Transducers.

Electricity Measurement, including Voltage, Current, Power, Power Factor, Total Harmonic Distortion, with analogue outputs and MODBUS / Ethernet communications available for all of your energy measurement requirements. Current and Voltage Transducers, Clamp on Current Sensors.

SCR (thyristor) Power Controllers complete with Control Electronics and Power Semiconductor heat sink assembly, (Phase angle, burst firing, ON/OFF switching) Solid State Contactors, Signal Conditioners and custom products. Designed and Manufactured in Australia

3 Phase and Single Phase, Diode or Controlled Bridge Rectifers for AC/DC motor drives, Welding, Power Supplies, and UPS, used in Temperature, Medical, Traffic Signals, and Home Appliance Applications.

Programmable Logic Controllers(PLC), Smart Relays, Temperature Controllers and Control Relays, Current and Voltage Monitoring Relays, Current Switches, Hour Meters, Signal Conditioners.

Custom Heatsink Extrusions, Bonded Heatsink, Water cooled Heatsink, Thermal Analysis Services

Rishabh InstrumentsCT's, Shunts, Signal Conditioners, Electrical Energy Meters and Software Systems Solutions for Measurement, Test and Energy Management applications in the industrial, commercial and government sectors.

Surge Suppression, Chokes, EMC Filters, Power Input Filter, Pulse Transformers.

Solid State Relays, I/O Modules, Filters, Heat Sinks, Din Rail Mounting systems, for low power and high power electrical switching and control applications. SCR/Diode Bridges and Modules.

Temperature, Process and Humidity Controllers, Sensors and Recorders for a wide range of applications including furnaces, boilers, ovens, kilns and extruders as well as a range of Signal Conditioners.

Low and Medium Voltage Power Factor Correction, and Induction Heating Capacitors, Controllers, Thyristor Switches, DC Link/Film Capacitors, AC Heavy Duty Capacitors, Customised or Standard Sizes.

Semiconductor Fuses for power control applications. Designed and Manufactured by Private label name brand replacement(NBR) Semiconductors and Solid Sate Relays

High energy Varistors and thermal disconnects for voltage transient suppression used in telecommunications, rectifier electronics, power electronics, measurement & control, process systems, computers, medical, automotive, test and instrumentation.

9B Lakewood Blvd Braeside Tel: +61-3-9763 5155 Victoria, Australia 3195 Fax: +61-3-9763 5206 Email: sales@fastron.com.au Web: www.fastron.com.au

ABN: 38 622 808 137

PROUDLY SUPPORTING