brochure 2600t_266_261_ing
-
Upload
alaa-mohammed -
Category
Documents
-
view
213 -
download
0
Transcript of brochure 2600t_266_261_ing
-
7/29/2019 brochure 2600t_266_261_ing
1/8
2600T Pressure TransmittersPressure measurement made easy
-
7/29/2019 brochure 2600t_266_261_ing
2/8
2600T produced by evolutionDiscover all the innovative eatureso a top quality transmitter amily
Unrivalled in its expertiseand longstanding traditionin transmitter manuacturing,
ABB oers the worlds mostcomprehensive range opressure measurement
products.
- New intuitive HMIor quick commissioning
- Reliable sensor technologies- Easy to install and congure- Multivariable version- Taylor Instruments all-welded
technology or diaphragm seals- Best-in-class stability
2 | 2600T Pressure Transmitters
-
7/29/2019 brochure 2600t_266_261_ing
3/8
ABB, common eatures across the range
Unique ease o operation innovative plug & play graphic
display
The user riendly HMI allows simple and intuitive transmitter
operation. The Easy Setup procedure allows the user to easily
commission the instrument without the need or an expensive
hand-held terminal.
The Communication You Need
ABB Instrumentation products are available with HART / 4-20 mA,
PROFIBUS PA, FOUNDATION Fieldbus, and MODBUS
communication protocols. The 266 series allows you to
preserve your investment allowing an upgrade rom HART toany other available communication protocol in minutes with
no need to remove the device rom its installation or to
recongure it. The modular construction o the 266 series
enables eld repairs to be carried out so that the instrument
is back in operation within 5 minutes o ailure detection.
The perect solution or your application
The 2600T amily oers products specically designed
to meet the widest range o applications ranging rom arduous
conditions in oshore oil and gas to the laboratory environment o
the pharmaceutical industry.
The 261 and the 364 space saver pressure transmitters with
stainless steel housings oer an optimum solution or extreme
environments where space and weight are critical. The new S26
diaphragm seals provide an optimum solution or high vacuum/
high temperature applications.
Reliability in severe service with S26 diaphragm seals
ABB remote seals have a high integri ty al l-welded construction
as standard. This construction is based on decades o
experience in manuacturing remote seal systems by Taylor
Instruments and produces the optimum solution or vacuum
applications.
The S26 diaphragm seal range is manuactured by ABB
and oers one o the widest choices o process connections
and wetted materials on the market today. ABB gives
customers the opportunity o choosing among dierent special
materials: Tantalum, Superduplex, Inconel 625, Monel,Hastelloy C-276 and unique to ABB Hastelloy C-2000.
The diaphragm seal portolio includes dierent coatings such
as anti-abrasion Diafex, gold plated to prevent hydrogen
penetration, anti-stick and anticorrosion, available as standard.
The broad range o wetted materials provides long lasting
solutions or highly corrosive applications.
ABB are also able to oer special designed remote seals
or individual process solutions.
S26 seals repair is supported by the ABB pressure service
centers worldwide.
2600T Pressure Transmitters | 3
-
7/29/2019 brochure 2600t_266_261_ing
4/8
The 261 series the high-quality cost-eective transmitter, as a result o ouruncompromised ocus on pressure and
level measurement
The 364 series represents the best solutionor hazardous areas and highly demanding
fow, level and pressure applications
- Compact housing- Maintenance ree due to ABBs
reliable well-proven sensor technology- Easy operation and set up via the
graphic display with intuitive menunavigation
- Wide choice o process connectionsto suit multiple installations
- Designed to meet both CIPand SIP applications
- HART digital communication
- Long term stability o 0.15%or 10 years
- The solution or multiple installationsin reduced spaces
- Smart drain/vent solution- Boltless and gasket-ree one
piece body design- On board LCD display with
intuitive menu navigation- Bi-directional low and totalization
capability- NACE conormity to MR0103 and to
MR0175 / ISO15156
4 | 2600T Pressure Transmitters
-
7/29/2019 brochure 2600t_266_261_ing
5/8
The 266 pressure transmitter amilyo products delivers previouslyunattainable operational beneits
TTG Technology: no more barriers between users and
instruments
ABB is the rst instrumentation company that is able to oer
TTG Technology (Through The Glass). With this exclusive and
innovative option, users can interact directly with the instrument,
without removing the windowed ront cover, saving cost and
time, especially in hazardous areas.
Using ABBs proven our button HMI (Human Machine Interace)
with intuitive menu navigation and Easy Set Up menu,
conguration times can be greatly reduced.Moreover, expensive hand-held congurators are no longer
necessary since all the essential parameters can be set via the
HMI with just one touch.
Easy to use starting rom the outside
The external non-intrusive zero and span push buttons allow
users to rerange the transmitter saely in a ew seconds.
An additional external write protection is also provided.
266: perormance with intelligence.From the design to the sotwareunctionality, the 266 representsthe latest evolutionionary stepin the wide ABB product portolio.Users can easily nd the right applicationsolution or their measurement needsand select among our dierent levelso accuracy: rom 0.075% up to 0.025%so as to boost plant availability ordemanding pressure measurement.
Accuracy is no longer a constraint.
5 | 2600T Pressure Transmitters
-
7/29/2019 brochure 2600t_266_261_ing
6/8
Simplicity and compactnessare the key to the ABB platormor pressure measurement
The 266 series never lets you down:
plug-in communication board and terminal block
The new design enables in-eld maintenance operations.
Both terminal block and communication boards can be
replaced in minutes without the need to recongure the
transmitter.
Failures due to lightening, wrong earth wiring, etc. are not now
an issue: 266 is protecting your plant productivity smartly.
PILD: Plugged Impulse Line Diagnostic as standard
Process diagnostics will continuously protect your 266HART / 4-20 mA, PROFIBUS PA and FOUNDATION Fieldbus
pressure transmitters rom the risk o impulse line clogging
or reezing.
Once a process anomaly is detected, the PILD unction will
generate a warning on the local LCD as well as via the
communication protocol.
SIL2 and SIL3 TUV certifed
The 266 series is certied by TUV NORD or use in saety
instrumented systems as per the requirements o IEC61508.
The transmitters meet the requirements or SIL2 applications
in a single transmitter conguration (1oo1) and or SIL3applications in a redundant conguration (1oo2).
2600T Pressure Transmitters | 6
-
7/29/2019 brochure 2600t_266_261_ing
7/8
2600T diaphragm sealsTaylors All-welded technologyPerformance and reliability over time
Flanged models
The ABB diaphragm seal portolioincludes rotating and xed-fange modelsspecically designed to connect tofanged pipe ttings according to ASME,JIS and EN standards.
Ring-Joint construction
This type o diaphragm seal, fangedaccording to ASME standard, has
been designed or high pressure /hightemperature conditions.
Waer / Pancake
Designed to connect to ASME and ENstandard fanges the waer diaphragmseal oers stable perormance ora large number o applications.Joints and fushing rings completethe already wide oering. Waer sealsrepresent a cost-eective and reliableapplication solution.
O-line seal
Available with threaded or ASME/EN fanged process connection, theO-line model matches small processconnections. Recommended or cleanprocess fuid measurements.
Sanitary models
Diaphragm seals developed according tothe stringent 3-A requirements. Availablewith dierent process ttings (Triclamp,
Cherry Burrel, Union Nut and Sanitary), thisrange demonstrates ABBs commitment tosatisy users needs by engineering solutionsor the most demanding processes.
Union connection
A screw thread process connection thatprovides a fush diaphragm or gaugepressure applications. Originally designedby Taylor Instrument this connectionis combined with the all weldedtechnology to provide a high integritysolution or arduous applications.
Chemical Tee
Available only rom ABB and designedor the chemical and Oil&Gas industries,the Chemical Tee remote seal is designedto connect to a Wedge Flow Elementor to any process tting with theappropriate dimensions.
Button
Button seals are designed or accuratehigh pressure measurement with a small
diaphragm size. This type o connectionis especially suitable or plastic and resinsproduction processes, at high pressureand high temperature conditions.
In-line
In line seals are suitable or measuringthe pressure o fuids in pipes.
The pressure measuring diaphragmorms the pipe wall making this type oseal suitable or measuring the pressureo fowing fuids particularly those that arehighly viscous or contain solids.
Pulp & Paper
Designed especially or preventingprocess media rom plugging theprocess connection, Pulp & Paperdiaphragm seals can be manuacturedwith anti-stick coatings which removethe need or manual cleaning andthereore reduce costs.
Urea service
This specialized remote seal ismanuactured rom materials whichmatch the aggressively corrosive
conditions when Urea is present in theprocess. The urea grade wetted materialsensure stable perormances even in hightemperature / high vacuum conditions.Huey test available as option.
Socket & Saddle
These diaphragm seals have beendeveloped to meet the requirementso users who require a directly weldedprocess connection. Suited or highlyviscous process fuids measurements.
2600T Pressure Transmitters | 7
-
7/29/2019 brochure 2600t_266_261_ing
8/8
Contacts
RB / 2 6 0 0 T - EN
1Note
We reserve the right to make technical changes or
modiy the contents o this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any
responsibility whatsoever or potential errors or
possible lack o inormation in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained therein.
Any reproduction, disclosure to third parties or
utilization o its contents - in whole or in parts is
orbidden without prior written consent o ABB.
Copyright 2009 ABB.
All right reserved.
ABB Automation Products GmbH
Borsigstr. 2
63755 Alzenau, Germany
Phone: +49 551 905 534
Fax: +49 551 905 555
E-Mail: [email protected]
ABB Engineering (Shanghai) Ltd.
No. 5, Lane 369, Chuangye Road
Kangqiao Town, Nanhui District
Shanghai, 201319, P.R. ChinaPhone: +86 (0) 21 61056666
Fax: +86 (0) 21 61056677
ABB Inc.
Automation Tecnology Products
125 E. County Line Rd
Warminster PA 18974-4995, USA
Phone: +1 215 674 6000
Fax: +1 215 674 7183
ABB S.p.A.
Via Statale 113
22016 Lenno (CO), Italy
Phone: +39 0344 58111
Fax: +39 0344 56278
www.abb.com/pressure
ABB Limited
Oldends Lane
Stonehouse
Gloucestershire GL 10 3TA, UKPhone: +44 1453 826 661
Fax: +44 1453 829 671
Hastelloy C-276 is a Cabot Corporation trademark
Hastelloy C-2000 is a Haynes International
trademark
Monel is an International Nickel Co. trademark