High speed and precise 3D printers for jewellery manufacturing

BRILLIANT PROTOTYPING

We believe that perfection is reachable for all of our customers. Our aim is to provide a printing solution that satisfies the highest demands of jewellery creation with ultra-fine and brilliant products.

Rapid Shape’s mission is to give our customers the tools to succeed. We accomplish this through our versatile 3D printers, our comprehensive service and dedication to providing aid through the manufacturing process.

Andreas GeitnerCTO Rapid Shape GmbH

Andreas SchultheissCEO Rapid Shape GmbH

3

Have you ever seen a bull in a china shop?

Instead of trying to fit a square peg in a round hole, let Rapid Shape provide for you the specialized tools to fulfill your individual requirements.

Our 3D printers cater to a wide range of industries and applications and provide a perfect result. Discover our S20+ and S30+ in fine, regular, large.

WITH THE PRODUCT, SERVICE AND KNOWLEDGE ADVANTAGES THAT WE OFFER, LET YOUR IDEAS BE IMPLEMENTED BRILLIANTLY.

A Force (Feedback) to be reckoned with

Rapid Shape knows that power is only powerful when you know how to use it. Our patented Force Feedback technology measures and responds to the forces applied to the part during 3D printing. This means using less supports during printing, resulting in precise removal and less preparation.

The final product is accurate, beautiful surfaces for your jewellery prints.

Time is money

Time is a commodity that we take seriously. Jewellery customers need both speed and accuracy to be competitive.

Rapid Shape has developed 3D printers that creates precise prints that require a minimal amount of time. Your rings can be printed in as fast as 45 minutes (depending on printing material and design complexity).

Simply Amazing

4 5

The end justifies the means

A short post-processing time means more pieces to go out the door. We have tested our 3D printers in a validated process with a variety of materials to ensure accurate print results and high repeatability.

The automated washing cyles ensure precise gold weights and even better casting thru curing under vacuum. This means that you will be spending less time and getting more results.

Go with the flow

Proper workflow increases efficiency and decreases complexity. We provide our customers with a one-stop solution for printing and post-processing. Start the process with our 3D printers, then post-process in our RS wash and RS cure, which can be inter-connected with your Rapid Shape printer.

Finally, finish your jewellery in our partner Schultheiss‘ heating and casting technologies; tested to provide the highest quality for your jewellery needs.

We won't let you down

Our service team is here should you ever require assitance with any of our high-end products. Contact us by phone, whatsapp or email and schedule a remote or on-site main-tenance session.

Our Rapid Shape Knowledge Center is available 24/7 and has answers for many of your immediate questions. The Knowledge Center can be accessed via your preferred browser or Rapid Shape printer (contact us for log in credentials).

PRECESSION, ATTENTION TO DETAIL, CASTABILITY AND REPEATABLE PRINTING PROCESSES

PRECISE GOLD WEIGHTS AND EVEN BETTER CASTING

6 7

Cure

Print

Wash

Design

Prepare

Simplicity in 3D printing at it's best

8

S20+Professional 3D printers for casting shops, design offices and jewellery manufacturers for easy and fast printing – again and again.

Bring your design to life: our compact and practical S20+ converts your jewellery design easily into printed parts.

Highest precision combined with highest reliability: with the S20+ you can achieve the top level of quality and repe-atability with your printed parts. Fast printing results make the S20+ your essential tool in the implementation of rapid prototyping.

Certified auto calibration (ACCS)

Remote control through TeamViewer®

Optional Force Feedback

Resin handling system (RHS)

Performance parameters S20+ fine S20+ regular S20+ large

Building area 84 × 47 mm 101 × 57 mm 133 × 75 mm

Native pixel +/– 21,5 µm +/– 26 µm +/– 34,5 µm

Max. part height 90 mm

Light source 405 nm UV LED

Resolution HD 1920 × 1080 px

Dimension (W × H × D) 335 × 541 × 349 mm

Connections WLAN, TCO/IC, USB

Control 7" LCD-Display, touch control

Recommended for micropave designs and stone settings

regular rings and college rings

larger pieces like bangles and statues with large surfaces

Low acquisition cost

Fine, regular or large version

available

Professional entry-level

printing solution

10 11

S30+Fast, flexible and semi- automated: The workhorse for casting shops, design offices and jewellery manufacturers.

Greater efficiency for professional print results – the S30+ ease of use and intuitive user interface allow fast, high- volume print results with consistent quality.

The optional automated part separation module (ASM, patents pending) enables cutting of parts without manual operation. Furthermore, the temperature-controlled resin reservoir provides process stability and improves part quality even more at maximum speed.

Resin handling system (RHS)

Certified auto calibration (ACCS)

Remote control through TeamViewer®

Knowledge Center Access

Large touch-screen

Resin temperature control

Resin mixing system for homogeneous part quality

Integrated Force Feedback

Performance parameters S30+ fine S30+ regular S30+ large

Building area 84 × 47 mm 101 × 57 mm 133 × 75 mm

Native pixel +/– 21,5 µm +/– 26 µm +/– 34,5 µm

Max. part height 110 mm

Light source 405 nm UV LED

Resolution HD 1920 × 1080 px

Dimension (W × H × D) 335 × 541 × 349 mm

Connections WLAN, TCO/IC, USB

Control 7" LCD-Display, touch control

Recommended for micropave designs and stone settings

regular rings and college rings

larger pieces like bangles and statues with large surfaces

User friendlyOptional:Automatic Separation

Module (ASM)

Fine, regular or large version

available

Designed for volume production

12 13

RS washPerfect finish for 3D printed jewellery parts:optimize your gold weights by a automated and controlled washing cycle.

The RS wash automated cleaning system boasts several new features to make cleaning your prints safe and easy (patents pending).

Fully automatic cleaning in approximately 6-8 minutes without the need to handle sticky resins. Easily achieve optimal results without wasting cleaning materials. The RS wash connects wirelessly to your printer, streamlining how you clean your prints.

Performance parameters RS wash

Volume 130 × 75 × 60 mm

Cleaning time approx. 6–8 minutes (depending on material)

Cleaning medium Isopropanol, metylalcohol, … (depending on material)

Connections WLAN/Lan

Dimension (W × H × D) 230 × 270 × 450 mm

Effective computer-controlled cleaning agent use

Exchangeable liquid container (plug-in system)

Stackable with RS cure

Reduced odors

Clean process, no handling of

sticky resins

Wireless connectivity to

printer

For optimal gold weight

14 15

RS cureSafety and speed throughout the entire production process: better casting results through curing under vacuum.

The RS cure unit offers a validated material curing in just about 6-10 minutes. The illumination system cures homogeneously from all sides by powerful LEDs in combination with heating and vacuum (patents pending). This process eliminates remaining monomers that otherwise cause investment breakdown in the firing process. The radiation covers the UVA and UVB spectrum.

Performance parameters RS cure

Volume 130 × 75 × 60 mm

Curing time approx. 6–10 minutes (depending on material)

Connections WLAN/Lan

Dimension (W × H × D) 230 × 270 × 380 mm

Versions with vacuum

360° illumination in one go

Certified auto calibration (ACCS)

Stackable with RS wash

Wireless connectivity to

printer

Validated process

Works with vacuum

16 17

Industrial manufacturing solutions: Automated volume production systems incomparable in speed, precision and quantity

18 19

S90+ standaloneYour partner for high performance 3D printing.

A true industrial printer designed for 24/7 production under 100% load, whether for filigree or large jewellery designs.

The patented force feedback technology enables the highest production rate with the lowest production costs per part and without compromising quality. Modular high performance sub-systems including a dual-circuit cooling system with heat exchanger ensure optimal operation.

Performance parameters S90+ standalone

Building area 231,5 × 137,3 mm

Native pixel +/- 22,5 µm

Max. part height 150 mm

Light source 405 nm, ultra high power UV LED

Resolution 2560 × 1520 px

Dimension (W × H × D) 443 × 1593 x 625 mm

Connections TCP/IP, USB

Control 10" LCD-Display, touch control

AC controlled interior for continuous use

Certified auto calibration (ACCS)

Optional automatic resin refill

Connection to process.net database system

Remote control by TeamViewer®

Web browser access

E/pcs

Lowest cost per part

24/7

Industrial continuous

manufacturing

20 21

S90+ cabinetPerfect workflow at maximum speed with consistent quality.

Performance parameters S90+ cabinet

Building area 232 ×137 mm

Native pixel +/– 22,5 µm

Max. part height 150 mm

Light source 405nm, ultra high power UV LED

Resolution 2560 × 1520 px

Dimension (W × H × D) 625 × 1593 × 800 mm

Connections TCP/IP, USB

Control 10" touch-screen

Versions Stand-AloneConveyor (Specifications on request)

Automatic Separation Module (ASM)

Automatic resin refill

AC controlled interior for continuous use

Certified auto calibration (ACCS)

Remote control through TeamViewer®

Web browser access

Connection to process.net database system

Ultra high 4k resolution projector

Brilliant results in a production line - the 3D printer stand- alone or for a fully automatic production line of your 3D printed parts.

The S90+ is a heavy use unit that does not compromise quality. The automated part separation module (ASM) (patents pending) collects multiple print jobs in an integrated catch tank, eliminating the need for constant attention from a human operator. The S90+ is capable of working 24/7, without breaks, to push your company to the next level.

Industrial continuous

manufacturing

24/7

Optional with cabinet or conveyor belt

Automatic Separation

Module (ASM)

22 23

GP 101+Resin to be used for visual models, models for silicone molds.

CP 201+Best casting resin, even for massive parts. Resin designed for conventional investment casting process in the jewellery.

CP 202+Resin especially designed for con-ventional investment casting process in the jewellery. Best RP part look – no wax particles.

CP 203+Most easy casting resin for filigree and medium heavy parts. Resin to be used for conventional investment casting process in the jewellery.

MP 300Ultra-strong mechanical structure. Temperature resistant up to 180°C. Resin designed for rubber & silicone molds.

We meet your specific requirements for all individual applications. Direct casting, mould making or universal resins – our portfolio grows with the market.

Jewellery materials

24 25

Masterpieces of modern engineering

Quality made in Germany

Each of our printers is the product of first class development with the highest quality of German standards. This is how we define top-level engineering.

Workflow can always be streamlined, which is why we consistantly strive to synchronize our customers‘ pro-cesses with our machines. With the know-how of Schultheiss GmbH on our side, we have the means to realize this potential for our customers.

We are pushing printing technology into the future by looking back on many years of experience with renowned jewellery manufacturers who have helped us to make our systems even better. This knowledge and proximity to the market makes us an invaluable partner for your business.

26 27

Rapid Shape GmbH Römerstrasse 21 71296 Heimsheim Germany

+49 7033 3098780 sales@rapidshape.de

rapidshape.de

P8 // 2020 // RS-S+-EN

-02