Brackets Mounting plates - NIEDAX...In order to avoid the deformation of ceiling support during the...

Support System

Ceiling bracket and wall bracket

Brackets

Profi les

Mounting plates

TKTKTKTK14

CABLE TRAY SYSTEM GFK

Compatible with our different ranges of cable trays, our supporting systems are available in

several fi nishes and different support structures. A range of support structures ranging from hot-dip

galvanized steel and epoxy, through the stainless steel, loaded polyester reinforced fi berglass.

Dimensions and perforations supports are suitable for EBO Systems cables trays.

The load capacities are variable according to the type of installation (ceiling, wall ...).

Profi les

Mounting plates

15

Overview brackets and hangers

Hangers and wall supports - average load KTAM 17

Hangers and wall supports, standard KTA 17

GRP brackets, pultruded FPAP 18

GRP brackets, pressed FPAM 18

GRP brackets, pultruded, Z Profi l FPCO 19

GRP support, pultruded FPPS 19

Hangers, U profi le HU 5050 20/21

Hangers-profi les HDS 21/22

Profi l U 5050 22/23

Anchor fi xing plate KU 5050 23

GRP hangers, U profi l FPES 24

GRP hangers, pultruded, Profi l C FPDS 24

STAINLESS STEEL Fixing system SS anchor bolt FPBGV 24

Track C-Profi l, opening of 15 mm, perforated FPAR 25

Protective cover KA 18

Protective cover K 5050 21

SYSTEM

ACCESSORIES

The classifi cation of brackets and hangers into categories like light, medium and heavy is only an indication for their typical usage. For engineering purposes exact calculations of overall loads considering the weight of the cable, the weight of the tray and the support span are mandatory. In the event that the support structures and loads of cables are uniformly distributed, the supporting capacity of the bracket must be calculated as follows: load F = (cables weight + weight of the various components of the support installation) x support distance

Load ratings shown in this catalog are valid only for proper anchorage to the building structure. Please refer to the general information section and consult site management or structural enginee-ring for details about the building structure and local regulations.

!16

SUPPORT SYSTEM

17

Hanger and wall bracketmiddle range

Warning: different properties for various lengths

for a wall mounting or a ceiling mounting

KTAM 100 E5

60 110 1,2 2 FLM 6x12 E5KTAM 200 E5 80 210 1,2 2 FLM 6x12 E5KTAM 300 E5 85 310 1,2 2 FLM 6x12 E5KTAM 400 E5 115 410 1,2 2 FLM 6x12 E5

E5

E5E5E5

Item ref. Height LengthL

adj. at L/2

Accessories/bolts

includedmm mm kN

Min. pack.

20 p.20 p.20 p.20 p.

EANcode

728305728404728503728602

Weight 100 units

pc.

16,5130,6144,3373,59

The load capacities are only valid if the main supporting part is sufficiently and correctly fixed,particularly the ceiling supports.

Ceiling support and wall bracketstandard range

for a wall mounting and for a ceiliing mounting

Mounting accessories required for cable ladder UL : ULKG, M10x30 V4A (to be ordered separatly )

KTA 100

45 40 110 2,5 2 FLM 6x12KTA 150 45 40 160 2,5 2 FLM 6x12KTA 200 55 40 210 2,5 2 FLM 6x12KTA 250 55 40 260 2,5 2 FLM 6x12KTA 300 65 50 310 2,5 2 FLM 6x12KTA 350 65 50 360 2,5 2 FLM 6x12KTA 400 75 50 410 2,5 2 FLM 6x12KTA 450 75 50 460 2,5 2 FLM 6x12KTA 500 90 50 510 2,5 2 FLM 6x12KTA 550 90 50 560 2,5 2 FLM 6x12KTA 600 90 50 610 2,5 2 FLM 6x12KTA 100 E5

45 40 110 2,5 2 FLM 6x12 E5KTA 200 E5 55 40 210 2,5 2 FLM 6x12 E5KTA 300 E5 65 50 310 2,5 2 FLM 6x12 E5KTA 400 E5 90 50 410 2,5 2 FLM 6x12 E5KTA 500 E5 110 50 510 2,5 2 FLM 6x12 E5KTA 600 E5 110 50 610 2,5 2 FLM 6x12 E5

F

FFFFFFFFFF

E5

E5E5E5E5E5

Item ref. Height WidthB

LengthL

adj. at L/2

Accessories/bolts

includedmm mm mm kN

Min. pack.

20 p.20 p.20 p.20 p.20 p.20 p.20 p.10 p.10 p.10 p.10 p.20 p.20 p.20 p.20 p.20 p.20 p.

EANcode

186907187003187102187201187300187409187508187607187706187805187904842605842629842643842667917402917426

Weight 100 units

pc. /

13,6016,9025,2029,8055,8062,7075,2083,80

106,70129,20122,8014,8025,9255,6980,00

120,00135,00


Oblong holes dimensions LL 7x40 mm in the KTA 100-600 seriesOblong holes dimensions LL 7x15 mm in the KTA 150-550 series (intermediate sizes) and in thealuminum finish KTA 100-600

Ceiling support and wall bracketepoxy, standard

for a wall mounting on supporting rail FPAR and on ceiling support FPES / FPDS

Mounting accessories required for cable ladder UL: ULKG, M6x30 V4A (to be ordered separatly )Mounting accessories required for cable ladder UL: ULKG, M10x30 V4A (to be ordered separatly )

KTA 100 C1KG

7032 45 40 110 2,5 2 FLM 6x12 E5KTA 150 C1KG 7032 45 40 160 2,5 2 FLM 6x12 E5KTA 200 C1KG 7032 55 40 210 2,5 2 FLM 6x12 E5KTA 250 C1KG 7032 55 40 260 2,5 2 FLM 6x12 E5KTA 300 C1KG 7032 65 50 310 2,5 2 FLM 6x12 E5KTA 350 C1KG 7032 65 50 360 2,5 2 FLM 6x12 E5KTA 400 C1KG 7032 75 50 410 2,5 2 FLM 6x12 E5KTA 450 C1KG 7032 75 50 460 2,5 2 FLM 6x12 E5KTA 500 C1KG 7032 90 50 510 2,5 2 FLM 6x12 E5KTA 550 C1KG 7032 90 50 560 2,5 2 FLM 6x12 E5KTA 600 C1KG 7032 90 50 610 2,5 2 FLM 6x12 E5

C1

C1C1C1C1C1C1C1C1C1C1

Item ref. RAL colour

Height WidthB

LengthL

adj. at L/2

Accessories/bolts

includedmm mm mm kN

Min. pack.

1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.

EANcode

967209967216967223967230967247967254967261967278967285967292967308

Weight 100 units

pc

13,116,424,428,853,960,772,881,1

103,3125,0118,8


Oblong holes dimensions LL 7x40 mm in the KTA 100-600 seriesOblong holes dimensions LL 7x15 mm in the KTA 150-550 series (intermediate sizes) and in thealuminum finish KTA 100-600

18

SUPPORT SYSTEM

Protective end cap

The end caps must prescripted in areas where the risk of hazard is important!

to protect the profile ends

KA 100-600

yellowK10

Item ref. Colour Min. pack.

10 p.

EANcode

347056

Weight 100 units

1,4

GRP bracketpultruded


Used for: Hanger FPES… and FPDS…

Fixing accessories for cables trays ( to be ordered separately ) : for cables trays K² and KP : M6x20 V4A

FPAP 100/AC

7032 110 1,25FPAP 150/AC 7032 160 1,25FPAP 200/AC 7032 210 1,25FPAP 250/AC 7032 260 1,25FPAP 300/AC 7032 310 1,25

K23

K23K23K23K23


LengthL

adj. at L/2

mm kN

Min. pack.

1 p.1 p.1 p.1 p.1 p.

EANcode

955725955732955749955756955763

Weight 100 units

pc. pc/

47,054,558,565,072,2


GRP bracketpultruded



FPAP 400/AC

7032 410 1,25FPAP 500/AC 7032 510 1,25FPAP 600/AC 7032 610 1,25

K23

K23K23


LengthL

adj. at L/2

mm kN

Min. pack.

1 p.1 p.1 p.

EANcode

955770955787955794

Weight 100 units

pc

161,5174,5186,0


GRP bracketpressed



FPAM 100

7032 50 55 120 1,25FPAM 150 7032 60 55 170 1,25FPAM 200 7032 70 55 220 1,25FPAM 300 7032 90 55 320 1,25

K23

K23K23K23


Height WidthB

LengthL

adj. at L/2

mm mm mm kN

Min. pack.

1 p.1 p.1 p.1 p.

EANcode

955848955855955862955879

Weight 100 units

pc.

17183650


19

GRP bracketpultruded, Z-profile

for the horizontal mounting of cable trays

Used for: Only for the cable trays KK… and KP…

Mounting accessories required for cable tray K2 and KP : M6x20 V4A ( to be ordered separatly )

FPCO 100/AC

7032 100FPCO 150/AC 7032 150FPCO 200/AC 7032 200FPCO 300/AC 7032 300

K23

K23K23K23


WidthB

mm

Min. pack.

1 p.1 p.1 p.1 p.

EANcode

963102963119963126963133

Weight 100 units

pc

556877

100

GRP supportpultruded, Z-profile

The support is universal

for the horizontal mounting of cable trays

Used for: Only for the cable trays KK… and KP… and UL…

Mounting accessories required for cable tray K2 and KP : M6x20 V4A ( to be ordered separatly )

FPPS

7032K23


Min. pack.

1 p.

EANcode

963140

Weight 100 units

pc

0

20

SUPPORT SYSTEM

Ceiling supportProfile U

Load F in kN

Def

lect

ion

f in

mm

In case of symetrical loads, the deflection is not significant.

Total length = U profile length, included fixing plate.HU 5050/200, has limited space for equipment in cable trays (bracket length & height)Used for: Rail FPAR and wall mounted bracket FPAP

Rail and wall mounted bracket KTA...

Load diagram : deflection of the hanger in case of one-sided charges

HU 5050/200

205HU 5050/250 255HU 5050/300 305HU 5050/400 405HU 5050/500 505HU 5050/600 605HU 5050/700 705HU 5050/800 805HU 5050/900 905HU 5050/1000 1005HU 5050/1100 1105HU 5050/1200 1205HU 5050/1500 1505HU 5050/2000 2005HU 5050/200 E5

205HU 5050/300 E5 305HU 5050/400 E5 405HU 5050/500 E5 505HU 5050/600 E5 605HU 5050/800 E5 805HU 5050/1000 E5 1005

F

FFFFFFFFFFFFF

E5

E5E5E5E5E5E5

Item ref. Total length L

mm

Min. pack.

1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.

EANcode

858705858729858743858767858781858804858828858842858866858880858903858927858941858965945757945702945764945771945788965953965960

Weight 100 units

pc. pc/

93,08105,23117,38141,68165,97190,27214,57238,87263,17287,46311,76336,06408,95530,4486,02

108,48130,92153,38175,83220,74265,65

The load data are only valid in case of a sufficiently strong fixing of the supporting part. The share ofloads in the building must be defined with the contractor. You must follow the guidelines anddefinitions in force.

In order to avoid the deformation of ceiling support during the mounting of brackets, it is necessaryfor mechanical reason, to take into account of the thickness of the ceiling support when screwing thehexagonal bolts. for static reasons and to facilitate the mounting of end caps, the bracket must be mounted at x=50 mmabove the ceiling support end.To prevent the deformation of the ceiling support profile when installing the brackets, it isrecommended to use hexagonal head bolts for mechanical reasons. Serie of oblong holes (13x40 mm) on 3 profile sides.

21

Hangerepoxy, U-profile

Load F in kN

Def

lect

ion

f in

mm

In case of symetrical loads, the deflection is not significant.

Total length = U profile length, included fixing plate.HU 5050/200, has limited space for equipment in cable trays (bracket length & height)Used for: Hangers FPES / FPDS and wall bracket FPAP

Rail FPAR and wall mounted bracket FPAP

Load diagram : deflection of the hanger in case of one-sided charges

HU 5050/200 C1KG

7032 205HU 5050/250 C1KG 7032 255HU 5050/300 C1KG 7032 305HU 5050/400 C1KG 7032 405HU 5050/500 C1KG 7032 505HU 5050/600 C1KG 7032 605HU 5050/700 C1KG 7032 705HU 5050/800 C1KG 7032 805HU 5050/900 C1KG 7032 905HU 5050/1000 C1KG 7032 1005HU 5050/1100 C1KG 7032 1105HU 5050/1200 C1KG 7032 1205HU 5050/1500 C1KG 7032 1505HU 5050/2000 C1KG 7032 2005

C1

C1C1C1C1C1C1C1C1C1C1C1C1C1


Total length L

mm

Min. pack.

1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.

EANcode

967100967124967131967148967155967162967179967186967193967063967070967087967094967117

Weight 100 units

pc

88,099,5

111,0133,9156,9179,9202,9225,8248,8271,8294,8317,7386,6501,5

Protective end cap

The end caps must prescripted in areas where the risk of hazard is important!

to protect the profile ends

Used for: Profile U 5050/… and hanger HU 5050/…

K 5050

yellowK10

Item ref. Colour Min. pack.

10 p.

EANcode

347025

Weight 100 units

pc.

3

To facilitate the assembly of end caps, a minimum space of 50 mm is required between the bracketbottom and the ceiling support end.

Ceiling support profile

Used for: Profile U 5050/… and hanger HU 5050/…

HDS 50.50 F

1 SKM 10x80 F, 2 UGM 10HDS 50.50 E5

1 SKM 10x90 E4, 2 UGM 10F

E5

Item ref. Accessories/bolts

included

Min. pack.

50 p.50 p.

EANcode

931705962266

Weight 100 units

pc. pc/

7,56,8

In order to avoid the deformation of ceiling support during the mounting of brackets, it is necessaryfor mechanical reason, to take into account of the thickness of the ceiling support when screwing thehexagonal bolts. To prevent the deformation of the ceiling support profile when installing the brackets, it isrecommended to use hexagonal head bolts for mechanical reasons.

21

Pendardepoxy, Profil U

Charge F en KN

Déf

lexi

on f

en m

m

Dans le cas de charges à peu près symétriques, la déflexion est à peine mesurable.

Longueur totale = la longueur du profil U, plaque de fixation compriseHU 5050/200, dispose d'un espace restreint pour l'equipement en chemins de câbles (lalongueur des pendards - la hauteur des consoles)Utilisable pour : Pendard FPES / FPDS et console murale FPAP

Rail FPAR et console murale FPAP

Diagramme des charges : flexion du pendard dans le cas d'une charge unilatérale.

HU 5050/200 C1KG

7032 205HU 5050/250 C1KG 7032 255HU 5050/300 C1KG 7032 305HU 5050/400 C1KG 7032 405HU 5050/500 C1KG 7032 505HU 5050/600 C1KG 7032 605HU 5050/700 C1KG 7032 705HU 5050/800 C1KG 7032 805HU 5050/900 C1KG 7032 905HU 5050/1000 C1KG 7032 1005HU 5050/1100 C1KG 7032 1105HU 5050/1200 C1KG 7032 1205HU 5050/1500 C1KG 7032 1505HU 5050/2000 C1KG 7032 2005

C1

C1C1C1C1C1C1C1C1C1C1C1C1C1

Réf. Art. Cou-leurRAL

Longueur totale L

mm

Coli-sage mini.

1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.

CodeEAN

967100967124967131967148967155967162967179967186967193967063967070967087967094967117

Poids100uni.

pc

kg

88,099,5

111,0133,9156,9179,9202,9225,8248,8271,8294,8317,7386,6501,5

Embout de protection

Les embouts de protection sont à prescrire dans les zones où le risque d'accident estimportant !

pour la protection des extrémités de profils

Utilisable pour : Profil U 5050/... et pendard HU 5050/...

K 5050

jauneK10

Réf. Art. Couleur Coli-sage mini.

10 p.

CodeEAN

347025

Poids100uni.

pc.

kg

3

Pour faciliter le montage des embouts de protection, un écart d'au moins 50 mm est à respecter entrela partie inférieure de la console et le bout du pendard.

Profil du pendard

Utilisable pour : Profil U 5050/... et pendard HU 5050/...

HDS 50.50 F

1 SKM 10x80 F, 2 UGM 10HDS 50.50 E5

1 SKM 10x90 E4, 2 UGM 10F

E5

Réf. Art. Accessoires/Boulonnerie

incluse

Coli-sage mini.

50 p.50 p.

CodeEAN

931705962266

Poids100uni.

pc. pc/

kg

7,56,8

Dans le but d'éviter la déformation des pendards au moment du montage des consoles, il estnécessaire pour des raisons statiques, de tenir compte de l'épaisseur du profil du pendard au momentdu serrage avec les boulons à têtes hexagonales.Pour empêcher la déformation du profil du pendard lors du montage des consoles, il faut utiliser desboulons à tête hexagonale pour des raisons mécaniques.

22

SUPPORT SYSTEM

Ceiling support profileepoxy

Used for: Profile U 5050/... C1KG and hanger HU 5050/… C1KG

HDS 50.50 C1KG

7032 1 SKM 10x90 E4, 2 UGM 10C1


Accessories/bolts

included

Min. pack.

10 p.

EANcode

967056

Weight 100 units

pc

7,5

To prevent the deformation of the ceiling support profile when installing the brackets, it isrecommended to use hexagonal head bolts for mechanical reasons.

Profile U 5050

for the manufacturing of ceiling supports and supporting systems made of different elements

U 5050/300 F

300U 5050/400 F 400U 5050/500 F 500U 5050/600 F 600U 5050/700 F 700U 5050/800 F 800U 5050/900 F 900U 5050/1000 F 1000U 5050/1100 F 1100U 5050/1200 F 1200U 5050/1500 F 1500U 5050/2000 F 2000U 5050/3000 F 3000U 5050/6000 F 6000U 5050/300 E5L

300U 5050/400 E5L 400U 5050/500 E5L 500U 5050/600 E5L 600U 5050/800 E5L 800U 5050/1000 E5L 1000U 5050/6000 E5L 6000

F

FFFFFFFFFFFFF

E5

E5E5E5E5E5E5

Item ref. LengthL

mm

Min. pack.

1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.2 m3 m6 m1 p.1 p.1 p.1 p.1 p.1 p.6 m

EANcode

918560918584918607918621918645918669918683918706918720918744918768918782859306859320965977965984965991966004966011966028966035

Weight 100 units

pc. pc/ m/

72,9097,20

121,50145,79170,09194,38218,68242,98267,28291,58364,47242,98242,98242,9867,3789,82

112,28134,73179,64224,55224,55

Serie of oblong holes (13x40 mm) on 3 profile sides

23

Profile U 5050epoxy

for the manufacturing of ceiling supports and supporting systems made of different elements

U 5050/300 C1KG

7032 300U 5050/400 C1KG 7032 400U 5050/500 C1KG 7032 500U 5050/600 C1KG 7032 600U 5050/700 C1KG 7032 700U 5050/800 C1KG 7032 800U 5050/900 C1KG 7032 900U 5050/1000 C1KG 7032 1000U 5050/1100 C1KG 7032 1100U 5050/1200 C1KG 7032 1200U 5050/1500 C1KG 7032 1500U 5050/2000 C1KG 7032 2000

C1

C1C1C1C1C1C1C1C1C1C1C1


LengthL

mm

Min. pack.

1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 p.1 m

EANcode

967384967391967407967414967421967438967445967339967346967353967360967377

Weight 100 units

pc

72,0096,00

120,00144,00168,00192,00216,00128,33141,17154,00359,00229,73


Anchor fixing plate included bolts

for the mounting on straight ceilings

Used for: Profile U 5050/…

KU 5050

105 5 2 FLM 10x25 FKU 5050 E5

105 5 2 FLM 10x25 E5F

E5

Item ref. Total length L

thickness of top

plates (th)

Accessories/bolts

includedmm mm

Min. pack.

1 p.1 p.

EANcode

191956967322

Weight 100 units

pc. /

76,8578,75


Anchor fixing plate included boltsepoxy

for the mounting on straight ceilings

Used for: Profile U 5050/... C1KG

KU 5050 C1KG

7032 105 5 2 SKM 10x25 E5C1


Total length L

thickness of top

plates (th)

Accessories/bolts

includedmm mm

Min. pack.

1 p.

EANcode

967315

Weight 100 units

pc

72,7


24

SUPPORT SYSTEM

Ceiling supportpultruded, C-profile

Total length = L + 53 millimetersThe ceiling support fixing to the ceiling with screws require the use of a large washer, to beordered separetly

for a mounting on 1 side of the support

Used for: Bracket FPAP…/AC and FPAM…/AC

Mounting accessories required : FPBGV10 V4A ( to be ordered separately )Other lengths are available on request

FPES 200/AC

7032 200 1,5FPES 300/AC 7032 300 1,5FPES 400/AC 7032 400 1,5FPES 500/AC 7032 500 1,5

K23

K23K23K23


LengthL

Admissible load

F in tractionmm kN

Min. pack.

1 p.1 p.1 p.1 p.

EANcode

955923955930955947955954

Weight 100 units

pc

7592

110127

Ceiling supportpultruded, double C-profile

Total length = L + 53 millimetersThe ceiling support fixing to the ceiling with screws require the use of a large washer, to beordered separetly

to mount on the both support sides

Used for: Bracket FPAP…/AC and FPAM…/AC

Mounting accessories required : FPBGV10 V4A ( to be ordered separately )Other lengths are available on request

FPDS 200/AC

7032 200 2 x 1,5FPDS 300/AC 7032 300 2 x 1,5FPDS 400/AC 7032 400 2 x 1,5FPDS 500/AC 7032 500 2 x 1,5

K23

K23K23K23


LengthL

Admissible load

F in tractionmm kN

Min. pack.

1 p.1 p.1 p.1 p.

EANcode

955886955893955909955916

Weight 100 units

pc

7696

175205

Anchor bolt

for fixing the cables on the C profile

Used for: Bracket FPAP/AC, FPAM/AC and FPAR/AC

FPBGV 10 E4

30E4

Item ref. LengthL

mm

Min. pack.

25 p.

EANcode

962662

Weight 100 units

pc

6,6

25

GRP fixing railpultruded, C-profile, slot width 15 mm, perforated

FPAR 500/AC

7032 500 1,5FPAR 750/AC 7032 750 1,5FPAR 1000/AC 7032 1000 1,5FPAR 2000/AC 7032 2000 1,5

K23

K23K23K23


LengthL

Admissible load

F in tractionmm kN

Min. pack.

1 p.1 p.1 p.1 p.

EANcode

955961955978955985955992

Weight 100 units

pc

5276

168244

Brackets Mounting plates - NIEDAX...In order to avoid the deformation of ceiling support during the...

Documents

Transcript of Brackets Mounting plates - NIEDAX...In order to avoid the deformation of ceiling support during the...