Bottle Blowing, Filling, Washing, Capping, Labeling ...
Transcript of Bottle Blowing, Filling, Washing, Capping, Labeling ...
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
Featured Machines In This Info Pack
Due to the raw material being organic, the output capacity will vary. The composition of organic raw material varies geographically and the nature of organic matter itself differs. (Eg. Maize in Ghana will have a different composition than maize in South Africa.) Zhauns cannot be held responsible for the output capacity
as well as the processing of your finished products.
Bottle washing, Filling, Capping & Labelling Line
Capping Machines
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076
KZN Tel: +27 (0)31 303 5011Cell: +27(0)82 447 0403
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
Bottle Filling Bottle Labeling
Piston Filler
Bottle Washer & Rinser
Bottle Blowing Machine
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 5011Cell: +27(0)82 447 0403
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
Follow us on
with mineral water, soft juice, soy sauce
Fill PET plastic or glass bottles.
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
WasherCapacity: *1500 - 2000 BPHWorking Position: 30Volume of bottle: 300 - 1500mlPower: 0.55kw 220/380VDimension: 100 x 100 x 140cmWeight: 200kgs
Filler Capacity: 1500 - 3000 BPHWorking position: 12Volume of bottle: 200 - 1500mlPower: 0.75Kw 220/380VDimensions (Filler & Capper): 175x115x200cmWeight (Filler & Capper): 900kg
Capper Capacity: 2000 BPHWorking position: 1Volume of bottle: 350 - 1500mlPower: 0.55Kw 220Dimensions (Filler & Capper): 175x115x200cmWeight (Filler & Capper): 900kg
Labeler:Capacity: 1500-2000 BPHWorking position: Volume of bottle: 200 - 1500mlPower: 3.5Kw 220/380VDimensions: 105x60x80cmWeight: 80kg .
Easy controller adjustment for various bottles & for beverage production. Machines may vary depending on product.
Please confirm the product that you are wanting to fill to get an accurate quote.
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 5011Cell: +27(0)82 447 0403
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
VariousModels
Big Bottle Water FillerFor Full
SpecificationsENQUIRE!
Linear Big bottle �lling machine
Rotary Big bottle �lling
Specifications - Linear bottle filler:YML-4414 washing heads4 filling heads1 capping headsRated Capacity:500-600BPH for 5L PET bottlePower: about 2.5kw4500*1500*1900mmIncluding 8M conveyor system
500-600BPH for 5L PET bottle
Specifications - Rotary bottle filler:YMR-8848 washing heads8filling heads4 capping heads Rated Capacity:1000-1500BPH for 5L PET bottlePower: about 2.5kw 4500*1500*1900mmIncluding 8M conveyor system
Flat & Round Bottle Labelling
BiggerProduction
LinesENQUIRE!
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
Round Bottle Labelling (Semi-Auto)
Capacity: 10-35pcs/minMax. Label dimensions: 120(L) x 400(W) mmPower supply: 220/110V 50/60HZAccuracy: ±0.5 mmAir Pressure: 0.5 MpaPower: 0.5 KWDimensions: 600×300×400 mmNet Weight: 25 Kg
Position bottle, press switch The label will be applied to the semi-curved surface area up to a maximum 1/3rd of the bottles circumference
Capacity: 10-35 pcs/min Max. Label dimensions: 150(L) x 230(W) mmPower supply: 220/110V 50/60Accuracy: ±0.5 mmAir Pressure: 0.5 MpaPower: 0.5 KwDimensions: 600×300×400 mmNet Weight: 35Kg
Position bottle, The label will be applied to the semi-curved surface area up to a maximum of 1/3rd the bottles circumference
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
SPECI FI CATI ONSPASTE/OINTMENT FILLER
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
Bottle Fillers Liquid & Paste Fillers (Piston Type)
Fill:• Medicine• Chemistry• Liquors• Lube• Paste• Shampoo• Conditioner• Tomato Sauce etc.
LIQUID FILLERSPECI FI CATI ONS
MPF-100MODEL MPF-300 MPF-500 MPF-1000 MPF-2500 MPF-5000
10-100ml 30-300ml 50-500ml 100-1000ml 300-2500ml 1000-5000mlFILLING RANGE(ml)
Bottle Fillers Liquid & Paste Fillers (Piston Type)
EGF-100 EGF-300 EGF-500 EGF-1000 EGF-2500 EGF-5000MODEL
10-100ml 30-300ml 50-500ml 100-1000ml 300-2500ml 1000-5000mlFILLING RANGE(ml)
Fill:• Medicine• Chemistry• Liquors• Lube• Paste• Shampoo• Conditioner• Tomato Sauce etc.
Manual Capping Machine
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
Model: -1YP
Multipurpose locking & capping machinestheft-proof locking/ capping revolving shell, turning cap and embossing in various kinds of glass, plastic, porcelain and polyester bottles.
Model:Voltage:Power:Capacity:Cap Diameter:Bottle height:Weight:Size:Type of cap:
DK-50/Z220V/60Hz0.37Kw≤1200 bottles/ hr25-40mm50-320mm65kg650*200*920mmPlastic cap
DK-50/D220V/60Hz0.37Kw≤1200 bottles/ hr20-40mm100-300mm65kg350*250*650mmMetal cap
Oil Filling machine
Line includes: Conveyor & motor heads
400 Bottles/hr
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
Capping Machines
Oil Filling & Capping line
Filling heads: 2Capacity: 400BPH for 2000ml bottlePower: 0.55kwspecification: 1000*600*1650mmAccuracy: ≤ 1%Applicable bottle diameter: Φ30mm—Φ110mm (customizable) Applicable bottleheight:≤300mm (customizable) Electromagneticvalve and cylinderPhotoelectric system: Low-voltageelectrical appliances and switch buttons
For full specs see info pack
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
MAKE
Room temperature for Bottle blowing machine& raw material must be kept between 22-27°C
Make bottle various
designs
4. Air compressor with tank
2. Air dryer
3. Air filter
1. Air chiller
Included with Bottle Blowing Machine
Features1. Produce bottle from 0.1L to 6L (Various models)2. Output capacity up to 0.1L for 400 bottles using two-cavity blow mold3. Advanced PLC control system with a user-friendly panel and time-control precision of PLC up to 0.01second4. Equipped with special designed air storage unit5. Using Infrared preform heater6. Independent Temperature Control for different heating lamp to get ideal preform heating results7. Heating lamps are adjustable in directions to suit various preforms.8. Machine can be operated by one person 9. Simple installation & startup adjustment.10. Waste rate of finished bottle is less than 0.3%
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
Bottle Blowing (Semi Auto)
Bottle
Example of pre form to make finished bottles
This gets blown into various bottle
shapes
We use GermanyFESTO cylinders
forsealing, clamping and stretching
unit on the blowing machine
MG-880 Semi-Automatic Blow Moulding Machine
.
Model A - 2 Cavity Model B - 1 Cavity Model C - 1 & 2 Cavity Blowing Range 100ml - 2.5LCapacity: Up to 400 bottles* per hourDimension: 148x60x213Weight: +-1 TonPre heater: 137 x 61 x 134Voltage Standard: 380v/3PH/50HzNumber of Heating Zones: 2 SectionsPower: 6KW
Blowing Range 2.5L - 6LCapacity: Up to 250 bottles * per hourDimension: 148 x 60 x 213Weight: +-1 TonPre heater: 137 x 61 x 134Voltage Standard: 380v/3PH/50HzNumber of Heating Zones: 2 SectionsPower: 6KW
Blowing Range 0.1L - 6LCapacity: Up to 400 bottles * (0.1L - 2.5L) Up to 250 bottles * (3L - 6L)Dimension: 148 x 60 x 213Weight: +-1 TonPre heater: 137 x 61 x 134Voltage: 380v/3PH/50HzNumber of Heating Zones: 2 SectionsPower: 6KW
X1 Free Mould X1 Free Mould X1 Free Mould
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
Produce bottles for: water, soft drink, juice, medical, cosmetic, dairy products,& many more
Room temperature for Bottle blowing machine & raw material must be kept between 22-27°C
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
Auto Bottle Blowing Machines
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
Specification
MODEL B 1 CAVITY
Includes 1x Free Mould
Max Iength of preform
Diameter of preform
Max. Container Volume
Neck Diameter Range
Max. Container Diameter
Max. Container Height
Specification
MODEL A 2 CAVITY±2500 Bottles per 500ml p/hr ±700 Bottles per p/hr
Max. Container Volume 2.5L Max. Container Volume 6 L
Bottle Blowing, Filling, Washing, Capping, Labeling & Packing Machines
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
MG-SS1LTGeneral Information MG-E2500 General InformationMaterial PET
180kn
130mm
370mm
70mm
2 Cavity
up to 2500 bottles p/hour
300mm
550 x 275mm
Clamping Force
Clamping Stroke
Max. Stretching Stroke
Bottom Moving Stroke
Number of Cavities
Theoritical Output
Max. Mould Thickness
Space between Tie Bars
Material
Clamping Force
Clamping Stroke
Max. Stretching Stroke
Bottom Moving Stroke
Number of Cavities
Theoritical Output
Max. Mould Thickness
Max. area of mouldbase
PET
50T
220mm
500mm
70mm
1 Cavity
up to 700 bottles p/hour
450 x 350mm
270mm
Air System Air System
Dimensions & Weight Dimensions & Weight
Container Container
Electrical System
Electrical System
Low Air Consumption
High Air Consumption
Low Air Consumption
High Air Consumption
8-10 Bar
30-40 Bar
Blow Moulding Machine
Preform Auto-Loader
225 x 150 x 180cm
100 x 150 x 250cm
Blow Moulding Machine
Preform Auto-Loader
2.5 x 1.65 x 2.035m
2.5 x 1.6 x 2.8m
Max. Container Volume
Neck Diameter Range
Max. Container Diameter
Max. Container Height
2.5L
16-38mm110mm
380mm
200mm
6L
50mm
350mm
190mm
380V/3PH/50Hz or special order
2 Sections
32KW
2.0T
380V/3PH/50Hz or special order
3 Sections
48KW
5T
Voltage Standard
Number of Heating Zones
Total Power(Full Loaded)
Net Weight
Voltage Standard
Number of Heating Zones
Total Power(Full Loaded)
Net Weight
Date: 20/04/2021 - PRICES VALID FOR 3 MONTHS
Price List
Prices subject to change - All prices Excl. VAT
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
Bottle_washing_filling_capping_label_line R 408 899.00 $27 299.00Bottle labelling for semi round_slightly curved bottles R 37 699.00 $2 499.00Bottle labelling for flat and semi round_slightly curved bottles R 37 699.00 $2 499.00
Big bottle water filler_Linear_type YML_441 FOR PRICE ENQUIREBig bottle water filler_Rotary_type YMR_884 FOR PRICE ENQUIRE
Paste filler_Piston type EGF_100 R 35 699.00 $2 399.00
Paste filler_Piston type EGF_300 R 37 099.00 $2 499.00
Paste filler_Piston type EGF_500 R 39 899.00 $2 699.00
Paste filler_Piston type EGF_1000 R 40 599.00 $2 699.00
Paste filler_Piston type EGF_2500 R 47 099.00 $3 099.00
Paste filler_Piston type EGF_5000 R 52 799.00 $3 499.00
Liquid filler_Piston type MPF_100 R 28 799.00 $1 899.00
Liquid filler_Piston type MPF_300 R 29 099.00 $1 899.00
Liquid filler_Piston type MPF_500 R 30 999.00 $2 099.00
Liquid filler_Piston type MPF_1000 R 32 099.00 $2 099.00
Liquid filler_Piston type MPF_2500 R 36 599.00 $2 399.00
Liquid filler_Piston type MPF_5000 R 46 699.00 $3 099.00
Manual capping machine R 13 899.00 $899.00
Capping machine_plastic_cap DK_50Z R 13 899.00 $899.00
Capping machine_metal_cap DK_50D R 13 899.00 $899.00
Prices subject to change - All prices Excl. VAT
Date: 20/04/2021 - PRICES VALID FOR 3 MONTHS
Price List
SMS/TEXT/WHATSAPP Enquiries: name, address & email with machine needed to: +27(0)79 067 6929
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
CT (H/O) Tel: +27 (0)21 447 3665Cell: +27(0)82 447 0403
+27(0)76 472 6504 [email protected]
JHB Tel: +27 (0)11 453 0485Cell: +27(0)72 334 6508
+27(0)71 682 9076+27(0)66 119 4553
KZN Tel: +27 (0)31 303 8011Cell: +27(0)82 447 0404
SHOWROOMS:
EMAIL:
Follow us on
visit: www.zhauns.co.za
*Subject to change/enquire Errors and Omissions excluded (E.&O.E.) *Picture for illustration purposes only; Model & Design may vary
Bottle blowing semi autoModel A2 Cavity R 407 999.00 $27 199.00
Bottle blowing semi autoModel B1 Cavity R 413 399.00 $27 599.00
Bottle blowing semi autoModel C1_and_2 cavity R 431 599.00 $28 799.00
Bottle blowing 6L mould_1 CavityFor semi auto machine R 29 599.00 $1 999.00Bottle blowing 5L mould_1 CavityFor semi auto machine R 27 899.00 $1 899.00Bottle blowing 330ml mould_2 cavity R 17 399.00 $1 199.00Bottle blowing 500ml mould_2 cavity R 19 199.00 $1 299.00Bottle blowing 750ml mould_2 cavity R 22 699.00 $1 499.00Bottle blowing 1000ml mould_2 cavity R 22 699.00 $1 499.00Bottle blowing 1500ml mould_2 cavity R 24 399.00 $1 599.00Bottle blowing 2000ml mould_2 cavity R 31 399.00 $2 099.00
Bottle blowing Full autoModel A2_Cavity R 1 022 099.00 $68 099.00
Bottle blowing Full autoModel B1_Cavity R 1 105 199.00 $73 699.00
Bottle blowing 500ml mould_2 cavity R 34 899.00 $2 299.00Bottle blowing 1000ml mould_2 cavity R 41 899.00 $2 799.00Bottle blowing 1500ml mould_2 cavity R 48 799.00 $3 299.00Bottle blowing 2500ml mould_2 cavity R 55 799.00 $3 699.00Bottle blowing 5L mould_1 cavityFor Full auto machine R 38 399.00 $2 599.00