BORplus Product Guide
-
Upload
sarmad-aftab -
Category
Documents
-
view
285 -
download
8
description
Transcript of BORplus Product Guide
BORplus2005_Cover_ENG_05.09.fh9 5/9/06 18:05 Page 2
Composite
C M Y CM MY CY CMY K
FOR USE IN HOT&COLD TAP WATER
AND HEATING SYSTEMS
Installation system
BORplus
Product
description
july 2005
EPIC
G111, L61, X721
for home
Top worldwide manufacturer of plastic pipe systems
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 1
Composite
C M Y CM MY CY CMY K
Table of contents
I. Background information ....................................................................................... 3
1. Basic data .................................................................................................. 3
2. System application ..................................................................................... 3
3. System benefits .......................................................................................... 3
II. System characteristics ......................................................................................... 4
1. Scope and conditions of use ....................................................................... 4
2. Product range ............................................................................................. 4
3. Pipes – matching pipe types with system operation parameters ................. 4
4. Fittings ........................................................................................................ 4
5. Approvals and certificates............................................................................ 5
III. Assembly ............................................................................................................. 5
1. Connection technique.................................................................................. 5
2. Installation guide ......................................................................................... 6
3. Welding process parameters ....................................................................... 7
4. Pipe connection........................................................................................... 7
IV. Guarantee ............................................................................................................. 8
V. Product description .............................................................................................. 9
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
Table of contents
2
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 2
Composite
C M Y CM MY CY CMY K
BORplus is made of type 3 polypropylene (PP-R). This material is
resistant to simultaneous and long-term exposure to temperature
and pressure of the medium, as well as 100% resistant to corrosion
and exposure of over 300 different chemical substances at various
temperatures.
Top-quality granulated plastic materials used to manufacture BORplus
system include:
BOREALIS (RA 130E-8427), Vestolen P 9421,
and TIPPLEN CS4-8000 G.
I. Background
information
1. Basic data
BORplus is an all-inclusive, high-quality, and well-tested polypropy-
lene installation system.
Operational safety and useful life of over 50 years of BORplus is ba-
sed on factors such as top-quality raw materials, strict control of
the manufacturing process, and fusion-welding connection techni-
ques used during assembly.
2. System application
BORplus can be used both in assembly of new systems or for repairs
of existing systems:
water systems (hot and cold tap water)
heating systems (radiator heating)
cooling systems (chilled water)
in all types of residential buildings (single-family houses and apart-
ment blocks) and public utility facilities.
Given its good chemical resistance, the system can also be used
for the following applications:
industry (compressed air systems, various types of process
piping)
agriculture and horticulture
3. Advantages
fittings constructed with accordance to requirements of pres-
sure class PN 25
lifetime – over 50 years
secure and quick assembly – fusion-welding guarantees
absolute tightness of connections
low noise level – vibrations are damped, sounds are absorbed
low linear resistance factor (k=0.007) – no pipe encrustation
reduced local resistance factors (even up to 60%) – unique
design of fittings
low thermal conductivity coefficient (0.21 W/mxK) – reduced
thermal losses
sanitary (hygienic) aspects (neutral to water)
resistant to many chemicals
www.wavin.pl
BORplus installation system
BORplus INSTALLATION SYSTEM Product description – july 2005
BORplus installation system
I. Background information
3
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 3
Composite
C M Y CM MY CY CMY K
II. System characteristics
4. Fittings
Compared to other PP systems, the distinguishing characteristics
of BORplus fittings include:
smoother transition at the fitting-pipe point of contact, reducing
flow irregularities
shift of the axis of symmetry in 90° elbows outside the fitting
(diameter range: 16 – 40 mm), directing the main stream of the
flow to a more rounded arch
As a result, BORplus ensures a threefold reduction of hydraulic los-
ses compared to other PP systems.
2. Product range
homogenous PP pipes class PN 10, PN 16, PN 20, diameter
range: 16 – 110 mm
PP pipes stabilised with a perforated aluminium insert, range
diameter: 16 – 110 mm
PP fittings, range diameter: 16 – 110 mm
PP fittings with fused elements (female and male threads)
PP ball and stright valves
accessories and fastening tools
1. Scope and conditions of use
Table 1. Product range and properties of pipes.
System
type
cold tapwater systems
hot tapwater systems
central heatingsystems
Operating pressure P [b]
Operating temperature top [°C]
Maximum emergency temperature te [°C]
Maximum operating time at te
10 10 6
20 60 80
- 95 100
- 100 100
Note: Emergency temperature (te) refers to periods of system breakdowns (e.g. control systems) when temperature might rise to levels presented in the table
above during the total operating time of 100 hours during 50 years of use, with the maximum emergency operating time up to 3 hours.
3. Pipes – matching pipe types with system operation parameters
Depending on the required operating conditions for different tempe-
rature and pressure values, the following pipe pressure range is
available:
PN 10 pipes – cold water systems with operating temperature
up to 20°C and pressure up to 10 bar
PN 16 pipes – cold water systems with operating temperature
up to 20°C and pressure up to 10 bar, as well as hot water sys-
tems with operating temperature up to 60°C and pressure up
to 6 bar
PN 20 pipes and stabilised pipes – cold and hot water systems
with operating temperature up to 60°C and pressure up to
10 bar, as well as central heating systems with operating tem-
perature up to 80°C and pressure up to 6 bar
PP pipes stabilised with a perforated aluminium insert strengthen
the pipe and reduce its thermal elongation.
Water flow characteristics
Standard elbow withcentric profile
elbow withnon-centric profile
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
II. System characteristics
4
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 4
Composite
C M Y CM MY CY CMY K
BORplus INSTALLATION SYSTEM Product description – july 2005
Pressure loss values
1. Connection technique
In general, BORplus pipes and fittings are connected using the poly-
fusion welding technique at 260 – 280°C. This technique guarantees
permanent fusion of the fitting and piping material, producing a uni-
form weld. As a result, the connection has even greater strength
than the pipe itself.
Alternatively, it is possible to use fittings with nickel-coated fused
brass elements with male or female threads, or flanged sleeves.
With these techniques, polypropylene systems can be connected
to any other material used in installation technologies.
5. Approvals and certificates
In line with current requirements for products and materials used in
construction, BORplus has all technical approvals of COBRTIINSTAL
and sanitary certificates of the National Institute of Hygiene.
III. Assembly
elbow
standardelbow
Flow [l/h]
Pre
ssure
loss v
alu
es Δ
p [b
]
0 500 1 000 1 500 2 000 2 500 3 000
1,0
0,0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0,9
www.wavin.pl
BORplus installation system
BORplus installation system
II. System characteristics/III. Assembly
5
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 5
Composite
C M Y CM MY CY CMY K
2. Installation guide
7. It is recommended to keep the connection
fixed for the next 10 – 20 seconds, allowing
the weld to cool down partially and achieve
the initial strength. It is now possible to make
other connections of the system. Full load of
the weld is allowed only when the connection
has cooled down completely.
Cooling
2. Before welding, pipes and fittings must be
cleaned (to remove dust, grease, etc.) and
dried.
3. Mark the required depth of pipe insertion into
the fitting (for a given outer pipe diameter –
see the table).
1. Pipes should be cut down to required length,
at 90° to the axis, using appropriate tools
(pipe shears or cutters).
Cutting Cleaning Marking
4. Before welding any stabilised PP pipes, a layer
of aluminium with the outer plastic coating
must be removed along the entire depth of
the weld. To remove the aluminium coat, use
a special coarse file with the diameter that fits
pipe dimensions.
5. Simultaneously insert the pipe end and slide
the fitting over corresponding heating tips of
the welder (heated up to 260 – 280°C earlier).
Keep the required heating time – see heating
time values for different system dimensions.
6. After heating, remove both elements from
heating tips and push the pipe into the fitting
flange up to the depth marked earlier. The
welding time depends on the outer diameter
of the pipe. Good welds should have a double,
uniform fin of material pushed out to the sur-
face, along the circumference connected
elements.
Heating Welding
Aluminium layer
stripping (stabilised
pipes only)
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
III. Assembly
6
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 6
Composite
C M Y CM MY CY CMY K
BORplus INSTALLATION SYSTEM Product description – july 2005
3. Welding process parameters
Pipe diameter Welding depth Heating time* Welding time Cooling time
[mm] [mm] [s] [s] [min]
16 13 5 4 2
20 14 5 (3) 4 2
25 15 7 (4) 4 2
32 16 8 (4) 6 4
40 18 12 (6) 6 4
50 20 18 (9) 6 4
63 24 24 (12) 8 6
75 26 30 (15) 10 8
90 29 40 (20) 10 8
110 32,5 50 (25) 10 8
Note:
Values presented in the table refer to PN 16, PN 20 pipes and stabilised pipes.
* Heating time values in brackets refer to PN 10 pipes.
* With the outside temperature below +5ºC, the heating time should be increased by 50%.
4. Pipe connection
Distances between (sliding) supports are given in cm for vertical
pipes made of:
polypropylene pipes (homogenous)
Pipe outside diameter
[mm]
Temperature of flowing water [ºC]
20 30 40 50 60 70
16 75 70 70 65 65 55
20 80 75 70 70 65 60
25 85 85 85 80 75 70
32 100 95 95 90 85 75
40 110 110 105 100 95 85
50 125 120 115 110 105 90
63 140 135 130 125 120 105
75 155 150 145 135 130 115
90 170 165 160 155 150 145
110 190 185 180 175 160 155
polypropylene pipes (stabilised)
Pipe outside diameter
[mm]
Temperature of flowing water [ºC]
20 30 40 50 60 70
16 125 120 120 110 110 90
20 135 125 120 120 110 100
25 145 145 145 135 125 120
32 170 160 160 150 145 125
40 185 185 180 170 160 145
50 210 205 200 185 180 150
63 235 230 220 210 200 180
75 250 245 235 225 210 190
90 265 260 250 240 230 210
110 270 265 255 245 235 215
www.wavin.pl
BORplus installation system
BORplus installation system
III. Assembly
7
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 7
Composite
C M Y CM MY CY CMY K
IV. Guarantee
Wavin-Metalplast-Buk Sp. z o.o. guarantees trouble-free operation
of the BORplus installation system for the period of 10 years after
the date of purchase of products covered by the guarantee, regardless
of the date when the system is put into operation.
This guarantee covers all elements of the BORplus installation system
manufactured or supplied by Wavin (excluding assembly tools). Any
compensation is guaranteed only on condition that all principles of
assembly, design, and operation have been complied with, as per
Wavin's recommendations or generally accepted principles of
construction technology.
If any other products (pipes or fittings) are used in the assembly
instead of BORplus installation products supplied by Wavin, this
guarantee shall be null and void.
Any other types of damage (such as mechanical system damage,
frost damage, etc.) or assembly-related errors and faults are not
covered by this guarantee.
If any defects are identified, Wavin hereby reserves the right to test
the defective system on-site within 7 days after any defect is identified,
before any corrective action is taken. In addition, the user should
present the receipt of purchase of products covered by this guarantee
when any defect is reported. Defects shall be reported to and the
said receipt shall be presented at the point of sale where products
covered by this guarantee were purchased. Failure to do so relieves
Wavin of any and all liability under this guarantee.
This guarantee covers the return of costs incurred by any third
person to make good or disassemble defective products as well as
to assemble, supply, and re-install defect-free products.
This guarantee does not cover any lost opportunity compensation,
in particular related to downtimes, business interruptions, reduced
value, or any other consequential damage. Any further claims shall
be excluded.
Wavin's liability for damage shall be limited to: 2,000,000 PLN per
any damage and 4,000,000 PLN per cumulative damage in one ca-
lendar year.
Wavin hereby reserves the right to contract any third-party specialist
companies to carry out any repairs of the system, at Wavin's
discretion.
Any period of repair shall not extend the total guarantee period.
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
IV. Guarantee
8
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 8
Composite
C M Y CM MY CY CMY K
BORplus INSTALLATION SYSTEM Zestawienie produktów – july 2005
Pipes
PN 10 pipe, 4 m longproduct code former
product code
s
[mm]
D
[mm]
3045030100 9503010 20 1,93045030130 9503013 25 2,33045030160 9503016 32 2,93045030190 9503019 40 3,73045030220 9503022 50 4,63045030250 9503025 63 5,83045030280 9503028 75 6,83045030310 9503031 90 8,23045030340 9503034 110 10,0
PN 16 pipe, 4 m longproduct code former
product code
s
[mm]
D
[mm]
3045025070 9502507 16 2,23045025100 9502510 20 2,83045025130 9502513 25 3,53045025160 9502516 32 4,43045025190 9502519 40 5,53045025220 9502522 50 6,93045025250 9502525 63 8,63045025280 9502528 75 10,33045025310 9502531 90 12,33045025340 9502534 110 15,1
PN 20 pipe in coils, 100 m longproduct code former
product code
s
[mm]
D
[mm]
3045035070 9503507 16 2,73045035100 9503510 20 3,4
PN 20 pipe, 4 m longproduct code former
product code
s
[mm]
D
[mm]
3045020070 9502007 16 2,73045020100 9502010 20 3,43045020130 9502013 25 4,23045020160 9502016 32 5,43045020190 9502019 40 6,73045020220 9502022 50 8,33045020250 9502025 63 10,53045020280 9502028 75 12,53045020310 9502031 90 15,03045020340 9502034 110 18,3
PN 20 stabilised pipe, 4 m longproduct code former
product code
s
[mm]
D
[mm]
3245050072 9505007 16 2,73245050102 9505010 20 3,43245050132 9505013 25 4,23245050162 9505016 32 5,43245050192 9505019 40 6,73245050222 9505022 50 8,43245050252 9505025 63 10,53245050280 9505028 75 12,53245050310 9505031 90 15,03245050340 9505034 110 18,4
s
D
unit of
measure
mmmmmmmmmm
unit of
measure
mmmmmmmmmm
unit of
measure
mm
unit of
measure
mmmmmmmmmm
unit of
measure
mmmmmmmmm
D
s
D
s
s
D
s
D
www.wavin.pl
BORplus installation system
BORplus installation system
V. Product description
9
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 9
Composite
C M Y CM MY CY CMY K
Dz Dw
Dz Dw
Corrugated casing pipe (red),coil 50 mproduct code former
product code
Dz
[mm]
Dw
[mm]
3145080070 9508007 21 253145080100 9508010 23 283145080130 9508013 29 343145080160 9508016 36 43
Corrugated casing pipe (blue),coil 50 mproduct code former
product code
Dz
[mm]
Dw
[mm]
3145085070 9508507 21 253145085100 9508510 23 283145085130 9508513 29 343145085160 9508516 36 43
Corrugated casing pipe (red),coil 25 mproduct code former
product code
Dz
[mm]
Dw
[mm]
3145080190 9508019 44 52
Corrugated casing pipe (blue),coil 25 mproduct code former
product code
Dz
[mm]
Dw
[mm]
3145085190 9508519 44 52
Pipes continued
Elbow 90ºproduct code former
product code
3045140070 95140073045140100 95140103045140130 95140133045140160 95140163045140190 95140193045140220 95140223045140250 95140253045140280 95140283045140310 95140313045140340 9514034
Elbows
Nipple elbow 90ºproduct code former
product code
3045143100 95143103045143130 95143133045143160 9514316
162025324050637590
110
D
[mm]
Z
[mm]
L
[mm]
16192124293440465056
222630354250607086
105
unit of
measure
mmmm
unit of
measure
m
unit of
measure
mmmm
unit of
measure
m
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
202532
D
[mm]
Z
[mm]
192124
L
[mm]
313644
L1
[mm]
263136
unit of
measure
szt.szt.szt.
Z
D
L
Z
D
L
L1
D
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
V. Product description
10
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 10
Composite
C M Y CM MY CY CMY K
www.wavin.pl
BORplus INSTALLATION SYSTEM Product description – july 2005
Teeproduct code former
product code
3045155070 95155073045155100 95155103045155130 95155133045155160 95155163045155190 95155193045155220 95155223045155250 95155253045155280 95155283045155310 95155313045155340 9515534
Tees
Reducer tee at branchingproduct code former
product code
3045158100 95158103045158130 95158133045158160 95158163045159130 95159133045159160 95159163045159190 95159193045159220 95159223045160160 95160163045160190 95160193045160220 95160223045161190 95161193045161220 95161223045161250 95161253045162220 95162223045162250 95162253045162280 95162283045163250 95163253045163280 95163283045164280 95164283145163310 95163313145164310 95164313145165310 9516531
Elbow 45ºproduct code former
product code
3045146070 95146073045146100 95146103045146130 95146133045146160 95146163045146190 95146193045146220 95146223045146250 95146253045146280 9514628
Nipple elbow 45ºproduct code former
product code
3045149100 95149103045149130 95149133045149160 9514916
1620253240506375
D
[mm]
Z
[mm]
L
[mm]
1315161821242831
1516182023263135
20 16 20 15 54 2725 16 25 16 63 2932 16 32 18 68 3325 20 25 16 63 3032 20 32 18 68 3440 20 40 21 81 3950 20 50 25 89 4332 25 32 18 76 3640 25 40 21 81 4150 25 50 24 97 4740 32 40 21 91 4350 32 50 24 97 4963 32 63 28 119 5850 40 50 28 109 5263 40 63 28 119 6075 40 75 31 139 6863 50 63 28 134 6375 50 75 31 139 7175 63 75 31 156 7590 50 90 36 140 7290 63 90 36 148 7490 75 90 36 160 78
D1
[mm]
D2
[mm]
D1
[mm]
Z
[mm]
L
[mm]
L1
[mm]
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.
L1
[mm]
162630
L
[mm]
202530
Z
[mm]
192124
202532
D
[mm]
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
L1
[mm]
232732384555677889
105
L
[mm]
4654637691
109134156179210
Z
[mm]
13151925313950597298
162025324050637590
110
D
[mm]
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
Z
L D
D
Z
L1
L
DD
Z
L1
L
D
D
L1
Z
L
D1
D2
BORplus installation system
BORplus installation system
V. Product description
11
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 11
Composite
C M Y CM MY CY CMY K
product code former
product code
3045105070 95105073045105100 95105103045105130 95105133045105160 95105163045105190 95105193045105220 95105223045105250 95105253045105280 95105283045105310 95105313045105340 9510534
Coupler
Pipe cap
product code former
product code
3045223070 95223073045223100 95223103045223130 95223133045223160 95223163045223190 95223193045223220 95223223045223250 95223253045223280 95223283145223310 9522331
Bypass
product code former
product code
3045230070 95230073045230100 95230103045230130 95230133045230160 9523016
Reducers
Reducerproduct code former
product code
3045110100 95110103045110130 95110133045111130 95111133045111160 95111163045111190 95111193045112160 95112163045112190 95112193045113190 95113193045112220 95112223045113220 95113223045114220 95114223045113250 95113253045114250 95114253045114280 95114283045115250 95115253045115280 95115283045116280 9511628
162025324050637590
110
D
[mm]
Z
[mm]
L
[mm]
13151618212428313642
293235394450586689
101
162025324050637590
D
[mm]
Z
[mm]
L
[mm]
131516182124283137
252832364250586572
16202532
D
[mm]
Z
[mm]
L
[mm]
18222734
808693
101
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.
D1
[mm]
2025253240324040505050636375637575
D2
[mm]
1616202020252532253240324040505063
Z
[mm]
1516161821182121242424282831283131
L
[mm]
3840424548465052555759616368667175
L1
[mm]
2629293339333939464646525258525858
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
Z
L
D
Z
L
D
320
L
R100
R100
Z
D
Z
L1
L
D1 D2
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
V. Product description
12
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 12
Composite
C M Y CM MY CY CMY K
www.wavin.pl
BORplus INSTALLATION SYSTEM Product description – july 2005
Flanged fleeve
product code former
product code
3045238250 95238253045238280 95238283045238312 95238313045238342 9523834
Threaded elements
90º elbow with male thread(wall-mounted)product code former
product code
3045330070 9533007 16x½" 25 26 49 523045330100 9533010 20x½" 25 26 49 523045330130 9533013 25x½" 25 30 49 553045331100 9533110 20x¾" 28 26 55 553045331130 9533113 25x¾" 28 30 55 57
D
[mm]
Z
[mm]
Z1
[mm]
L
[mm]
L1
[mm]
90º elbow with female thread
product code former
product code
3045390070 9539007 16x½" 22 383045390100 9539010 20x½" 26 383045390130 9539013 25x½" 30 413045391100 9539110 20x¾" 26 403045391130 9539113 25x¾" 30 423045391160 9539116 32x¾" 32 46
D
[mm]
Z
[mm]
L
[mm]
90º elbow with female thread(wall-mounted)product code former
product code
3045310070 9531007 16x½" 25 26 49 383045310100 9531010 20x½" 25 26 49 383045310130 9531013 25x½" 25 30 49 413045311100 9531110 20x¾" 28 26 55 403045311130 9531113 25x¾" 28 30 55 42
D
[mm]
Z
[mm]
Z1
[mm]
L
[mm]
L1
[mm]
Expansion loop
product code former
product code
H
[mm]
D
[mm]
3045248070 9524807 16 2,7 260 1553045248100 9524810 20 3,4 320 1703045248130 9524813 25 4,2 330 2103045248160 9524816 32 5,4 400 2403045248190 9524819 40 6,7 400 260
s
[mm]
L
[mm]
Nipple reducerproduct code former
product code
3045110110 95110113045111140 95111143045112170 95112173045113200 95113203045115310 95115313045116310 95116313045117310 95117313245180312 9511831
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.
L1
[mm]
1820212330343842
L
[mm]
3437404565707493
Z
[mm]
1315161824283133
D2
[mm]
1620253250637590
D1
[mm]
20253240909090
110
D
[mm]
637590
110
L
[mm]
95110136164
L1
[mm]
637180
103
unit of
measure
szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
Z
A-A
L
A A
L1
Z1
Z
L1
L
D2 D1
L1
L D
H
L
D
A-A
Z
L
L1
AA
Z1
Z
L
BORplus installation system
BORplus installation system
V. Product description
13
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 13
Composite
C M Y CM MY CY CMY K
90º elbow with female threadand wrench unit
product code former
product code
3045395160 9539516 32x1" 34 59
Threaded elements continued
90º elbow with male thread
product code former
product code
3045400070 9540007 16x½"3045400100 9540010 20x½"3045400130 9540013 25x½"3045401100 9540110 20x¾"3045401130 9540113 25x¾"3045401160 9540116 32x¾"
90º elbow with male threadand wrench unitproduct code former
product code
3045405160 9540516 32x1" 34 78
Tee with female threadat branchingproduct code former
product code
3045410070 9541007 16x½"x163045410100 9541010 20x½"x203045411100 9541110 20x¾"x203045410130 9541013 25x½"x253045411130 9541113 25x¾"x253045411160 9541116 32x¾"x32
Tee with female thread at branching,with wrench unitproduct code former
product code
3045415160 9541516 32x1"x32 18 68 78
Tee with male threadat branching
Tee with male thread at branching,with wrench unitproduct code former
product code
3045425160 9542516 32x1"x32 18 68 78
D
[mm]
Z
[mm]
L
[mm]
D
[mm]
Z
[mm]
L
[mm]
L1
Z
L
222630263032
525255555761
D
[mm]
Z
[mm]
L
[mm]
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
131515161618
445151595963
505255555759
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
product code former
product code
3045420070 9542007 16x½"x163045420100 9542010 20x½"x203045421100 9542110 20x¾"x203045420130 9542013 25x½"x253045421130 9542113 25x¾"x253045421160 9542116 32x¾"x32
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
131515161618
445151595963
505255555759
unit of
measure
szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
unit of
measure
szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
unit of
measure
szt.
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
unit of
measure
szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
L
Z
L
Z
L
Z
L1
Z
L
L1
Z
L
L1
Z
L
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
V. Product description
14
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 14
Composite
C M Y CM MY CY CMY K
BORplus INSTALLATION SYSTEM Product description – july 2005
Coupler with female thread
product code former
product code
3045350070 9535007 16x½"3045350100 9535010 20x½"3045350130 9535013 25x½"3045351100 9535110 20x¾"3045351130 9535113 25x¾"
Coupler with female threadand wrench unitproduct code former
product code
3045362160 9536216 32x1"3045363190 9536319 40x1¼"3045364220 9536422 50x1½"3045365250 9536525 63x2"3045366280 9536628 75x2½"
Coupler with male thread
product code former
product code
3045370070 9537007 16x½"3045370100 9537010 20x½"3045370130 9537013 25x½"3045371100 9537110 20x¾"3045371130 9537113 25x¾"
Coupler with male threadand wrench unitproduct code former
product code
3045382160 9538216 32x1"3045383190 9538319 40x1¼"3045384220 9538422 50x1½"3045385250 9538525 63x2"3045386280 9538628 75x2½"3045386310 9538631 90x3"
Half-union with female thread
product code former
product code
3045430070 9543007 16x½"3045431070 9543107 16x¾"3045430100 9543010 20x½"3045431100 9543110 20x¾"3045431130 9543113 25x¾"3045432130 9543213 25x1"
Half-union with male thread
product code former
product code
3045440070 9544007 16x½"3045441070 9544107 16x¾"3045440100 9544010 20x½"3045441100 9544110 20x¾"3045441130 9544113 25x¾"3045442130 9544213 25x1"
60
Z
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
1315161516
4143464647
2828283131
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
1821242831
6472809098
5157626873
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
1315161516
5557586162
4143464647
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
182124283136
8391
102114123127
515762687384
D
[mm]
Z
[mm]
242424243030
D
[mm]
Z
[mm]
L
[mm]
323232323939
898990909195
unit of
measure
szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
Z L1
L
Z L1L
Z
L1L
Z
L1
L
Z
L
www.wavin.pl
BORplus installation system
V. Product description
BORplus installation system
15
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 15
Composite
C M Y CM MY CY CMY K
Union
Z
L product code former
product code
3045450080 9545008 16x¾"x163045450110 9545011 20x¾"x203045450140 9545014 25x1"x25
D
[mm]
Z
[mm]
303037
L
[mm]
120121121
unit of
measure
szt.szt.szt.
Polypropylene manifold (4 branches)
product code former
product code
3045455100 9545510 4/20 32 443045456100 9545610 4/20 40 56
Valves
product code former
product code
3245500100 9550010W 203245500130 9550013W 253245500160 9550016W 323245500190 9550019W 403245500220 9550022W 503245500250 9550025W 63
Stright valve
product code former
product code
3245515100 9551510W 203245515130 9551513W 253245515160 9551516W 323245515190 9551519W 403245515220 9551522W 503245515250 9551525W 633145515280 9551528 75
Ball valve
Steel clamp with rubber insert
product code former
product code
3145803070 9580307 163145803100 9580310 203145803130 9580313 253145803160 9580316 323145803190 9580319 403145803220 9580322 503145803250 9580325 633145803280 9580328 753145803310 9580331 903145803340 9580334 110
D1
[mm]
D2
[mm]
D
[mm]
Z
[mm]
283039414860
L
[mm]
698089
112136162
D
[mm]
60657185
100115134
L
[mm]
D
[mm]
Threaded screw
product code former
product code
3145807010 9580701 M8x503145807020 9580702 M8x803145807030 9580703 M8x1003145807040 9580704 M8x1203145807050 9580705 M8x1503145807060 9580706 M8x200
DxL
[mm]
unit of
measure
szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.
Z
[mm]
Z
40 57
246
D2
D1
L
ZD
L
D
L
D
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
V. Product description
16
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 16
Composite
C M Y CM MY CY CMY K
BORplus INSTALLATION SYSTEM Product description – july 2005
Support clamps
product code former
product code
3145800070 9580007 163145800100 9580010 203145800130 9580013 253145800160 9580016 323145800190 9580019 403145800220 9580022 503145800250 9580025 633145800280 9580028 753145800310 9580031 90
Plastic clamps
D
[mm]
Z
[mm]
L
[mm]
L1
[mm]
141414141414141515
40465157708096
105128
32384550637287
100121
Plastic clamps with a wall plug
Pipe cutter
product code former
product code
unit of
measure
D
[mm]
3145815040 9581540 16 – 40 szt.3145815750 9581575 40 – 63 szt.
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.
Mounting plate
product code former
product code
3145950010 9595001 64 220
Z
[mm]
L
[mm]
unit of
measure
szt.
Plugs
Pressure test plug (blue)
product code former
product code
3145955010 9595501 ½"3145955020 9595502 ¾"
Pressure test plug (red)
product code former
product code
3145955030 9595503 ½"3145955040 9595504 ¾"
Z
L
D
[mm]
Z
[mm]
L
[mm]
3239
6291
D
[mm]
Z
[mm]
L
[mm]
3239
6291
unit of
measure
szt.szt.
unit of
measure
szt.szt.
product code former
product code
3145805070 9580507 163145805100 9580510 203145806130 9580513 253145805160 9580516 323145805190 9580519 403145805220 9580522 503145805250 9580525 63
D
[mm]
Z
[mm]
Z1
[mm]
L
[mm]
14141817171923
88
1010101212
59647592
10111087
L1
[mm]
33384453607088
unit of
measure
szt.szt.szt.szt.szt.szt.szt.
Z
L
L1
Z
Z1
L
L1
L
Z
www.wavin.pl
BORplus installation system
BORplus installation system
V. Product description
17
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 17
Composite
C M Y CM MY CY CMY K
Welders
Welder (800 W)
product code former
product code
unit of
measure
D
[mm]
3145825740 9582575 16 – 63 szt.
Welder (1200 W)
product code former
product code
unit of
measure
D
[mm]
3145825760 9582576 16 – 90 szt.
Welder (1600 W)
product code former
product code
unit of
measure
D
[mm]
3145825790 9582579 16 – 110 szt.
Welder mounting screw
product code former
product code
3145501010 9550101 22
Heating tip
product code former
product code
3145935070 95935073145935100 95935103145935130 95935133145935160 95935163145935190 95935193145935220 95935223145935250 95935253145935280 95935283145935310 95935313145935340 9593534
Coarse file for stabilised pipes
product code former
product code
3145945160 9594516 16/203145945200 9594520 20/253145945250 9594525 25/323145945320 9594532 32/403145945500 9594550 503145945630 9594563 633145945750 9594575 753145945900 9594590 903145946100 9594610 110
16 30 25 2520 34 26 3025 40 28 3432 50 30 4040 60 32 5050 70 35 6063 80 40 7075 100 43 9090 120 52 120
100 140 55 120
Z
[mm]
L
[mm]
L1
[mm]
B
[mm]
Z
[mm]
L
L
[mm]
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.szt.szt.szt.szt.szt.szt.szt.szt.
unit of
measure
szt.
L
[mm]
666770765964666973
L
Z
L1
Z
B
L1
L
Z
PHONE+48 (46) 864 04 00
FAX+48 (46) 864 04 02
BORplus installation system
V. Product description
18
BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 18
Composite
C M Y CM MY CY CMY K
BORplus INSTALLATION SYSTEM Product description – july 2005
www.wavin.pl
BORplus installation system
BORplus installation system
Notes
19
BORplus2005_Cover_ENG_05.09.fh9 5/9/06 13:38 Page 1
Composite
C M Y CM MY CY CMY K
Product
description
Wavin Metalplast-Buk Sp. z o.o.Dobieżyńska 43
64-320 Buk
phone: +48 (61) 891 10 00
fax: +48 (61) 891 10 11
e-mail: [email protected]
www. wavin.pl
All Wavin products come with complete
catalogue documentation and support of
our technical experts. Wavin Metalplast-Buk is continuously developing and improving its products; therefore, we reserve the right to modify
or change our product specifications without prior notice. All information contained herein was prepared in good faith
and was considered up-to-date and without any reservations as at the date when this specification was printed. This
catalogue does not constitute an offer within the meaning of the Civil Code, only information on the product portfolio
offered by Wavin Metalplast-Buk.
“WAVIN for home” sanitary and heatinginstallation system
Our goal is to provide our individual and institutional investors with top-quality
building installation and heating systems. Based on many years of experience,
access to cutting-edge technologies, innovative solutions, and focus on
customer needs, we are able to offer the following range of reliable products:
PVC soil & waste system and Wavin AS low-noise sanitary system,
sanitary and heating installation systems: Tigris Alupex, Tigris Pex,
BORplus, Hepworth,
Wavin QuickStream syphonic roof drainage system,
Kanion gutter systems,
around the house drainage,
linear drainage system,
individual sewer treatment system.
Installation system
BORplus
for home
Wavin Metalplast-Buk Sp. z o.o.Sochaczew Plant
Koscinskiego 23
phone: +48 (46) 864 04 00
fax: +48 (46) 864 04 02
Order service