Boq Gaza Park Boq

7/31/2019 Boq Gaza Park Boq

1/13

UNITED NATIONS

DEVELOPMENT PROGRAMME

Implemented By:

United Nations Development Programme

"Programme of Assistance to the Palestinian People"

Bill of Quantity

CONSTRUCTUIN OF UNDP

PARKING AREA


2/13

1/1

Demolishing of the existing store 120 m2 area according to

the approved method statement and including transfer the

rubble to approved dump yard according to the UNDPengineer instructions.

L.S 1

1/2

Relocation and replanting of the existing trees. The work

includes importing all required materials; such as

agricultural soil, fertilizer, concrete basins, etc. and making

good all according to drawings, specifications and

instructions of the Engineer.

L.S 1

1/3

Clean, excavate, cut and fill the parking area and Ramp

with clean dune sand to the bottom of the sub-base layer

design level including watering, compaction not less than

98% & CBR not less than 15% ,all according to drawing

and technical specifications .

m2 1,050.0

1/4

Supply and lay approved sub-base material ( Kurkar) of 20

cm thickness for the parking area in one layer with CBR.>

30%, watering and compaction up to 98% maximum drydensity according to modified proctor test. all according to

drawing and technical specifications .

m2 1,000.0

1/5

Supplying ,spreading ,leveling , damping and compacting

(M.D.D 100%) of 15cm base coarse material with CBR80

up to required` levels, according to drawing specifications

and under supervision .

m2 1,000.0

1/6

Supply, spread, install approved colored interlock tiles 8

cm thick including 5 cm clean sand bed, compacting and

tiles testing all according to drawings, specifications and

instructions by the Engineer.

m2 1,000.0

Total (US $)

Total

AmountUS $

QuantityUnitUnit Rate

US $(letters)

Item

No.Description

Unit Rate

US $(Numbers)

Bill No. 1

Excavation and Interlock Work

2


3/13

Rates of Concrete Works shall include:-

1. All form works and shuttering (new lumber for shuttering)

in any form, shape and size . Making chamfered and curved

edges, allowing for and making grooves and sleeves and

using Tie Rods (Batant) for concrete walls ; removal of

forms and cleaning of all exposed tie wires and rods. Steel

forms must be used in shuttering the external decorations.

2. Supplying, Casting, vibrating and curing as per

specifications.

3. Approved additives and admixtures.

5. Supplying reinforcement of any grade, size and length as

detailed in the drawings, storing on site including cutting,

bending and fixing in position and providing all tying wires,

spacers, shop drawings, testing and bar bending schedules

6. Painting of exposed surfaces of underground reinforced

concrete elements with two coats of hot bituminous paint(75/25) after primer layer , the strokes of each layer to be

opposite to each other.

7. Compaction and testing under the foundation, ground

beams, and ground slabs, the compaction must exceed 97%

of MDD.

8. All works according to specifications , drawings and

supervisor engineer instructions

2/1

Supply and cast ready mix reinforced concrete B(250)

kg/cm2

for the footings and ground beams for bounadary

beams around the parking area, edge beam. The work shall

include polythene sheets under the footings and beams,

excavation, compaction and backfilling ,all according to

drawings and technical specifications .

M3 16

2/2Ditto but for middle and copping beam as per specifications,

drawings and supervisor engineer's instructions.M

3 8

2/3

Supply and cast ready mix reinforced concrete B (300)

kg/cm2 for columns, footing, ground beams and lintels for

guard room . Then price include the cost of used materials

equipments, and workmanship for all necessary protections

and safety measures for the excavated area, in addition to the

protection of the neighbouring foundations if any.

M3 6

2/4

Supply and cast ready mix reinforced concrete B (300)

kg/cm2 for retaining walls (footing, stem) stairs and retaining

beams. The price includes the cost of used materials,

equipments and workmanship for all necessary protections

and safety measures for the excavated area, in addition to the

protection of the neighbouring foundations if any. all works

should be according to Drawings, Specifications and


M3 24

Bill No. 2

Concrete Works.Unit Rate

US $

(letters)

Unit Rate

US $

(Numbers)

Total

Amount

US $

Item

No.Description Unit Quantity

3


4/13

Unit Rate

US $

(letters)

Unit Rate

US $

(Numbers)

Total

Amount

US $

Item


2/5

Supply and cast ready mix concrete B250 for Ribbed Slabs

of 25cm thickness including reinforced steel, hollow block

(25x40x17cm), drop beams and electrical conduits and all

other materials according to Drawings, Specifications and


M2 40

2/6

Supply and cast reinforced concrete (B-250) concrete lining

for Ground Slab, ramp and Abutment for retaining wall of

10cm. thickness including steel reinforcement ( 8 mm

diameter every 20 cm in both directions), reinforced edge

beam and polythene sheet , the rate shall include applying

well trowelled surface, all in according to drawings,

specifications and engineer's instructions.

M2 40

2/7Ditto but 15 cm thick with 10 mm diameter of reinforcement

steel every 20 cm in both directions for cars' ramp.M

2 60

Total (US $)

4


5/13

The price include:

1- supplying hollow or solid cement block from goodand approved factory in perfect dimension and build it

in good manner with a compressive strength 35 kg/cm2

for hollow block and 60 kg/cm2

for solid block. This

item will include cement mortars, reinforced concrete

infill (B250) between columns & block walls (10-20 cm

wide) with 28mm/40cm horizontally and 210mm

vertically according to drawings, pipes encasement, and

bituminous paper between block work and drop beams

& all requirements needed to finish the works according

to the drawings, specification and to the supervision

engineer instructions.

2- Providing samples for approval and all the required

tests.

3/1

Supply and build hollow cement block 40x20x20cm for

external walls according to the drawings, specification

and to the supervision engineer instructions.M

2 400

3/2

Supply and build solid cement block 40x20x20 cm,

under ground beams, and external boundary for building

including painting the buried parts with one coat of

primer and two coats of hot bitumen according to the

drawings, specification and to the supervision engineer

instructions.

M2 50

Bill No. 3

Building Works.

Total (US $)

Unit Rate

US $

(letters)

Unit Rate

US $

(Numbers)

Total

Amount

US $

Item


5


6/13

All works must be according to drawings, specification and engineer

instructions. Rates shall include :

Supply of all needed materials, including galvanized angles for the

corners as well as the use of galvanized wire mesh between

concrete and block work.

Preparation works by covering all conduits of electricity, water

supplies , etc, with a galvanized wire mesh at least 20cm width

coated by mortar (1:1) cement : sand and the work includes removal

of wires and nails and cleaning of surfaces to be ready for

plastering.

Contractor shall take into consideration that all direct and indirect

works and expenses required for the completion of the coming items

are included in the unit price.

Trimming of concrete chippings, removing the wires and etc. and

cleaning of existing surfaces to be ready for plastering.

This should be done prior to commencement of plastering and after

obtaining a written approval from the supervision engineer.

Curing with water for at least three days for each coat.

4/1

Supply and make internal plastering 13 mm thick for ceiling, walls

and soffits. The work includes rough primer nail rendering to form a

key with (mix 1:1) cement sand, second layer 13mm: Base-Coat

"Rendering" with (1:3:0.25) cement: sand: lime and third layer:

Finishing Coat with (1:4:0.50) cement: sand: lime . Works include

all materials needed to finish the works according to specifications ,

drawings and supervisor engineer's instructions.

M2 120

4/2

Supply and make external plastering 20mm thick to walls with four

faces : the first is the rough nail rendering (mix 1:1) cement sand;

the second is 5mm thick mortar (mix 1: 2) cement: sand, the third is

the undercoat 13mm (mix 1: 3 :0.25) cement:sand:lime, the forth is

two coats of Tyrolean finish ( mix 1: 3) white cement to fineaggregate (Quartiz) and all is according to specifications , drawings

and supervisor engineer's instructions.

M2 600

Bill No. 4

Plaster Works.

Total (US $)

ItemNo.

Description Unit Quantity

Unit Rate

US $(letters)

Unit Rate

US $(Numbers)

Total

AmountUS $

6


7/13

5/1

Supply and install terrazzo floor tiles (grade A) size

25cm x 25cm x 2.5cm laid on 2cm mortar bed and 5

cm sand bed and terrazzo skirting 25cm x 7cm x1cm

including all materials and testing as per

specifications and drawings

M2 35

5/2Supply and Paint the ceiling with one coat of Pendroleprimer and at least two coats of emulsion paint

(Polyside) as per specification and drawingsM2 40

5/3

Supply and Paint, internal walls with one coat of

Pendrole primer and at least two coats of emulsion

paint (Supercryle) as per specification and drawingsM2 120

5/4

Supply and Paint, external road mark painting for the

roof of guard room, for the cars parking and tracks

arrows with one prime coat and two finishing coats of

approved brand name painting material or equal

approved as specification and drawings

M2 100

5/5

Supplying & fix (W1) (1.2X1.6 m) colored aluminum

window section 7000 with two rails, with min. wallthick 1.5mm, glass 4 mm thick, ironmongery ,

accessories and hard ware as per specification and

drawings.

No. 2

5/6

Supply and fix colored aluminum window W2 hinged

type section 4500 type , overall s ize 70 x100 cm,

complete with frame, two hinges at the mid (Jack

type), glass 4mm thick, ironmongery and hardware

and as per specifications and drawings.The work shall

include applying Shatter Resistance Film to the glass.

No. 1

5/7

Supply & fix Wooden Door D1 (80X220X4.5 cm)

made of wood grade A including frame cover

mould, architrave and at least two coats of oil paint,

hard ware locked type Walley switch or equivalent

and brass hinges 10cm height and all other fitting

according to specification and drawings.

No. 1

5/8

Supply and install white glazed wall tiles (grade A)

size 20 cm x 20cm x 6mm thick laid on mortar

backing up to lintel level including limefree cement

plaster coat (1:3) as specified in the drawing and

approved by representative engineer.

M2 20

5/9

Supply and install best quality non slipping ceramic

floor tiles (grade A) size 20 cm x 20cm x 6mm thick

as specification and drawings.M2

5

5/10

Supply and install roof water proofing course

consisting of polypit sheets (4.0mm thick) and base

coat of bitumen and making good all according to

specifications and instructions by the Engineer.Therate include verticals parts skirting as per specificat

M2 40

Total (US $)

Unit Rate

US $

(Numbers)

Total

Amount

US $

Bill No. 5

Finishing work

Item


Unit

Rate

US $

7


8/13

.6/1 Supplying , fixing and erecting 3" hot galvanize steel Pipe

3 m hight, with 3 mm thick hot galvanized sheet base

plate, 2020 cm . The item shall include 43/4" Galv.

Steel bolts. The item shall also include outdoor street

light fixture 250 Watt lamp Gaash type or equevelent with

1.5" hot galvanized arm 2 m, ignitor, choke coil, starter,

capacitor,junction box , 32.5 sq. mm NYY cable from

junction box to the outdoor street light fixture 250 Wattlamp, and all other materials and accessories required to

complete the job according to Drawings, Specifications

and instructions of the Engineer.

No. 7

.6/2 Supplying ,fixing and erecting wall outdoor mounted

projector . The item shall include 23/4" Galv. Steel

bolts , 250 Watt lamp,junction box, ignitor, choke coil,

starter, capacitor, 32.5 sq. mm NYY cable from junction

box to the outdoor street light fixture 250 Watt lamp , and

all other materials and accessories required to complete

the job according to Drawings, Specifications and

instructions of the Engineer.No. 3

.6/3 Supplying and erecting 510mm2 XLPE cable to connect

the MDB with the source. The item shall include

excavation ,backfilling, 3" flexible conduits and warningtape and all other materials and accessories required to


and instructions of the Engineer.Mr 80

.6/4 Supplying and erecting 56mm2 XLPE cable, connecting

the MDB with each junction box of the external light

Projectors. The item shall include cable channel

,excavation, backfilling, 3" flexible conduits , warning tape

and all other materials and accessories required to



Mr 120

.6/5 Supplying and installing MDB box (60x40) cm (Type is

MOELLER or equivalent). including all circuit breakers,

busbars, accessories, and all other materials and

accessories required to complete the job according to

Drawings, Specifications and instructions of the Engineer.

LS 1

.6/6 Supplying and erecting TV socket outlet including wiring

co axial cable 75 ohms and all other materials and



No. 1

.6/7 Supplying and erecting telephone socket outlet including

wiring 2 pair cable from themain tel. box including sleeves

and all other materials and accessories required to



No. 2

.6/8 Suppling and erecting flurescent light fixture 220 V, 1X36

W, 120 cm long discharge lamp, dayligh, electronic

starter, wires, conduits, bolts & clamps. Type Gaash orequivelent and all other materials and accessories

required to complete the job according to Drawings,

Specifications and instructions of the Engineer.

No. 5

Unit Rate

US $

(Numbers)

Total

Amount

US $

Bill No. 6

ELECTRICAL WORKS

Item


Unit Rate

US $

(letters)

8


9/13

Unit Rate

US $

(Numbers)

Total

Amount

US $

Item


Unit Rate

US $

(letters)

.6/9 Supplying and erecting circular wall and ceiling mounted

polycarbonate light with 60 W lamp waterproof type IP54

including wires, conduits and all other materials and



No. 2

.6/10 Supplying and erecting double pole switch Type Gewiss

or approved equal including wires, conduits and all other

materials and accessories required to complete the job

according to Drawings, Specifications and instructions ofthe Engineer.No. 3

.6/11 Supplying and erecting single phase, 220V, 16 A socket

outlet including wires, conduits and all other materials

and accessories required to complete the job according

to Drawings, Specifications and instructions of the

Engineer.No. 5

.6/12 Supplying and erecting Oz-On A/C regulator including

wires, conduits and all other materials and accessories

required to complete the job according to Drawings,

Specifications and instructions of the Engineer.

No. 1

.6/13 Supplying and erecting security lighting control panel

including one 10 A photocell, 1 three poles 3 Kw

contactor, with the needed auxiliary contacts, one toggle

switch (0,1,2), one 110 A MCB, 316 A MCB, and one24 hour timer and all other materials and accessories

according to Drawings, Specifications and instructions of

the Engineer.LS 1

.6/14 Supply, install UPVC 4" pipes for electrical cable as per

drawings , the work include Excavation ,backfilling on

layers 20 cm thick with compacting to 97% of MDD. and

all required accessories required to complete the job, all

according to drawings, specifications and instructions of

the Engineer.

Mr 100

.6/15 Supply and install 3" flexible PVC conduit with a rope

inside it for futuer ducts, the work include Excavation

,backfilling on layers 20 cm thick with compacting to 98 %

,and all required accessories required to complete the

job, all according to drawings, specifications andinstructions of the Engineer.

Mr 200

.6/16 Supply and install 60 cm internal diameter precast

circular reinforced concrete electrical manholes, complete

with B300 cast in place reinforced concrete base or

(approved precast), cast iron cover (25ton Capacity),

Frame, ring's inside , excavation in any type of soil up to

1.5 mdepth , backfilling with clean sand and compaction,

and all required accessories required to complete the job,

all according to drawings, specifications and instructions

of the Engineer.

No. 3

Total (US $)

9


10/13

All Plumbing works include the required units and

its accessories as described in the items and the

rates include:

1- All the plumbing units should be from the best

quality and has trade mark.

2- Submitting shopdrawing for water supply and

waste water networks for approval prior to

commencement of the work.

3-Submitting samples for all required material with

catalogue indicating its specifications.

4-All required tests , pressure for water net work ,

hydraulic test for sewage lines

5- Cleaning and desinficting all water pipes.

6- Insulation of all galvanized water pipes and

wraping it with bitumen's sheets and protect pipes

located under tiles with cement morter. In addition

to the insulation materials against heat loss for hot

water pipes.

7- All hot and cold water pipes for the points of

fixtures to the nearest distribution board.

8-All plumbing works ( wash basin, kitchen sink,

gully traps,etc) include the connection to the

nearest trap, WC to the nearest vertical sewage

header in the typical floors and WC in the GF to the

nearest manhole and include all accessories

including PVC S and caps for all the ends of pipes

7/1 Supply and fix white glazed fireclay Oriental W.C.

suite (Vitra type - grade A ), or equivalent complete

with 9 liter plastic double action flushing cistern,

and fixed chromium plated tap 1/2 Tibesa type or

equivelent, including all water supply pipes16mm(Golany) to the nearest dist. box (DB),

flushing hose sprayer, angle valves, UPVC drainage

pipe connecting to the nearest manhole or sewage

header as per specifications , drawings and

supervisor engineer instructions.No. 1

7/2 Supply and fix white glazed fire clay hand wash

basin size 55cm x45cm (Vitra type - grade A ) or

equivalent, complete with all water supply pipes

16mm (Golany) to the nearest distribution box (DB),

waste fitting, trap, plug and chain, chromium water

mixer ( Tebisa ,jack, wall mounted type or

equivalent), glazed fire clay soap holder, and the

drainage line 2 to the nearest floor trap. No. 1

7/3 Supply and install white glazed steel shower tray

size 70x70x7cm with shower mixer (Tebisa jack

type) including sprayer, hose, stand, glazed fire clay

soap holder, including all needed fittings, pipes, and

connections to water network to reach the

distribution box.including cold and hot water supply

lines EPDM 16 mm to the distribution box dia.,

waste fitting, trap, plug with chain and drainage

connection to the nearest manholes.No. 1

Total

Amount

US $

Bill No. 7

Plumbing WORKS

Item


Unit Rate

US $

(letters)

Unit Rate

US $

(Numbers)

10


11/13

Total

Amount

US $

Item


Unit Rate

US $

(letters)

Unit Rate

US $

(Numbers)

7/4 Supply and fix floor trap 4inch diameter, complete

with heavy duty brass grating and 4& 2 PVC

drainage pipe to the nearest manhole and including

S trap if needed as specification and drawings. No. 1

7/5 Supply and install 3" P.V.C drainage pipes

including all necessary bends connections and

making good all according to specifications and

instructions by the Engineer.

MR 97/6 Supply, paint, fix and disinfect cold water storage

plastic tank 1500 liter capacity , approved type, float

valve, overflow pipe (1diam) and drip tray, with all

connections to the rising main and distribution pipe

work and stop valves 1, and painted steel

foundation from welded angles 45x45x4.5mm

50cm high , 5cm new hard wood on the complete

area under the tanks, with all accessories as

specification and drawings. the rate includes

painting of the water tank.No. 3

7/7 Supply and install concrete manhole of internal

diameter 60 cm ,and (50-100) cm depth according to

the required level, 12cm thick plain concrete forwalls and base, slab, with cast iron cover with frame

50cm opening, 8 ton bearing capacity, including

excavation, backfilling, hunching and making good

according to specification ,drawing, and the

engineer instructions.

No. 2

7/8Supply and install water distribution box

(60x65x15) cm with Golani Pipes all needed

accessories .All lines to have Sagiv valves and Air

valves with aluminum cover as per drawings and

engineers instructions. No. 2

7/9 Supply and install PE pipe 20mm to connect the

main feeder galv. steel pipe 1" to the DB in thegaurd room with all reguired fittings and

accessories. The item includes fixing to the walls

using galvanized brakets and connecting it to theMR 70

7/10 Supply and install Galvanized steel pipe1" from the

water tanks on the UNDP buildin roof to the car

bark. The item includes fixing to the walls using

galvanized brakets and connecting it to the water

tank with all reguired fittings and accessories. MR 25

7/11 Supply and install UPVC pipes 200mm, SN8 for

outlet drain, with sockets ,work includes

excavating of trenches (depth 0.75-1.5m), bedding,

compacted backfilling with clean sand, connecting

to the existing manholes and hydraulic test

according to the specifications and the engineersMR 30

7/12 Supply and construct storm water collection gullies

of length 3.0 m as detailed in drawings constructed

of reinforced concrete B300 , including cast iron

grills, cast iron curb stone , benching, excavation

and backfilling with clean sand and compaction,

remove the surplus soil to the tip as shown in the

drawings and according to the specifications and the

engineers instructions. No. 3

Total (US $)

11


12/13

8/1

Supply and install steel door 2.20x0.9m (type SD1). The

price should include oil painting two coats, primer coat, and

Walley switch type lock, hinges and iron mongery all

according to drawings, specifications and instructions by

the Engineer.

No. 1

8/2

Supply and install steel door 2.20x1.0m (type SD2). The

price should include oil painting two coats, primer coat, and

Walley switch type lock, hinges and iron mongery all

according to drawings, specifications and instructions by

the Engineer.

No. 1

8/3

Supply and install steel sliding gate 2.55.0 m to be

mounted at the UNDP parking entrance .the unit rate shall

include painted one primer coat and two oil coats at least,

the unit rate shall include supplying ,installing and erecting

an approved complete electrical motorreducer ''DELMA

ROY 6 or equivalent''with electrical power capable to

operate the sliding gate ,complete with control panel ,

remote control, latches, and all needed electrical cables

,wires ,and conduits and all needed parts, fittings and

accessories .The unit rate shall include all needworkmanship ,equipment , concrete to fix the gate with the

existing walls and requirement to complete the job .The

work shall be done all as per drawings, specifications

,manufacture instructions and instructions by the Engineer.

No. 1

8/4

Supply and install steel sliding gate 2.55.0 m to be

mounted at the UNDP emergency parking exit .the unit rate

shall include painted one primer coat and two oil coats at

least, Walley switch type lock, hinges , iron mongery and

all needed parts, fittings and accessories, suspended

parbed wires .The unit rate shall include all need

workmanship ,equipment, concrete to fix the gate with the

existing walls and requirement to complete the job .The

work shall be done all as per drawings, specifications

,manufacture instructions and instructions by the Engineer.

No. 1

8/5

Supply and install fence 1.5 m height including supply and

fixing steel tri - angles edge (Type ST-37 total length 2.5m)

and fixing at least 1 m from the total length in concrete

columan, 40*40*4mm Wire Mesh 1.5m height , three rows

of 4mm Tension Wire,and Barbed wire 0.45m height, all

according to drawings and engineers instructions.

MR 120

Unit Rate

US $

(Numbers)

Total

Amount

US $

Total (US $)

Bill No. 8

Metal WORKS

Item


Unit Rate

US $

(letters)

12


13/13

1

2

3

4

5

6

7

8

Summary

Item Total (Us $)

Metal works

Description

Excavation and Intrlock works

Concrete Works

Plumbing works

Plastering works

Total in letters ..............................................................................

Building works

Total in numbers .........................................................................

Finishing works

Electrical works

VAT(0%)

TOTAL (US $)

Name of the contractor ......

Mobile .

Authorized signature ......

Signature and Sealing.

Title ...

Telephone.

Fax .

13

Boq Gaza Park Boq

Documents

Transcript of Boq Gaza Park Boq