Boq Electrical

8/3/2019 Boq Electrical

1/22

C

Sl.

No

DSR

NO

Description of Itemstotal

Qty Unit DSR NDSR DSR NDSR

C

C1 Non-sch commissioning of free standing, floor

mounted indoor type, air insulated, totally

enclosed vermin proof, dead front,compartmentalised, cubicle type, 2 mm

thick sheet steel enclosure panel suitable

for use on 415 V, 3 Ph.,4 wire, 50 Hz. A.C.

system, incoming circuit breaker/ S F unit,

high conductivity TP & N Aluminium bus

bars, bus bar, risers, extended bus bars

for cable connection, outgoing circuit

breakers instrumental panel, C.Ts,

outgoing feeder terminals and incomingcable compartment. The incoming and

outgoing functional units shall be arranged

in multi tier formation to provide a

compact panel. Each unit shall be

accommodated in a totally separate

compartment having gasketted hinged

door

INTERNAL ELECTRIFICATION WORKSRate Amount (TOTAL)

HEAD: ELECTRICAL WORKS

ELECTRICAL PANELS

ELECTRICAL: Page 1


2/22

Sl.

No

DSR

NO


Qty Unit DSR NDSR DSR NDSR with locking arrangement. The Panel shall

be complete with switches/circuit breakers

of following ratings, interconnection, G.I.

earth bus bar of adequate size covering

the total length of switch board with drilled

holes, G.I. bolts, nuts, washers etc. The

cubicle should be painted with two (2)

coats of light grey synthetic enamel paint

over two coats of zinc chromate primer.The complete fabrication, construction

shall be done as

per the detailed specification and

conforming to the

relevant IS. Short circuit interrupting

current of all MCBss ou e o m n mum. ame p ate

of

Panels/DBs Danger Board, incoming and

outgoing

feeders with Ampere rating of switches/

MCCB/ MCB

etc. are to be fixed up on front door above

or below the

respective switches. Approval ofManufacturer's

drawings from Consultant/Employer is

required before

commencing manufacture and panel

should be tested

in the presence of Consultant/ Employer's

engineer at

ELECTRICAL: Page 2


3/22

Sl.

No

DSR

NO


Qty Unit DSR NDSR DSR NDSR manufacturer's premises before dispatch

to site.

C1a Non-schIncoming :

415 V400 A 50 KA 4pole MCCB (Relay

range 320-400 A) : 1 no.

Multifunction meter to observe

voltage/current/PF etc with sets of 400/5A

CT's ete. As reqd3 Nos. Phase Indicating lamp, 230 V3nos. protective fuse :PVC SLEEVED TPN ALUMINIUM BUS

BAR :100 mm x 8 mm for phases &50 mm x 6 mm for neutral.GI EARTH BUS BAR25 mm x 6 mm covering the total length of

panel.Outgoing :4 Nos.415 V 200 A, 35KA 4 pole MCCB

with relay range 160-200A.1 Nos.415 V 100 A, 25KA 4 pole MCCB

with relay range 80-100A.4 Nos.415 V 63 A, 25KA 4 pole MCCB

with relay range 50-63A. 1.00 No 350,000.000.00 350,000.00

C1a Non-schIncoming :415 V400 A 50 KA 4pole MCCB (Relay

range 250-320 A) : 1 no.Multifunction meter to observe


CT's ete. As reqd3 Nos. Phase Indicating lamp, 230 V3nos. protective fuse :

MAIN POWER DISTRIBUTION BOARD

MAIN POWER DISTRIBUTION BOARD

ELECTRICAL: Page 3


4/22

Sl.

No

DSR

NO


Qty Unit DSR NDSR DSR NDSR PVC SLEEVED TPN ALUMINIUM BUS


panel.Outgoing :4 Nos.415 V 125 A, 35KA 4 pole MCCB

with relay range 100-125A. 1.00 208,600.000.00 208,600.00

C1b Non-schIncoming :415 V100 A25 KA 4pole MCCB (Relay

range 80-100 A) : 1 no.125A 4 pole 415V on load change over

switch-1no

Multifunction meter to observevoltage/current/PF etc with sets of 100/5A


BAR :40 mm x 6 mm for phases &25 mm x 6 mm for neutral.

GI EARTH BUS BAR25 mm x 6 mm covering the total length of

panel.Outgoing :9 Nos.415 V 63 A, 10KA 4 pole MCB1 Nos.415 V 32 A, 10KA 4 pole MCB 1.00 No 108,000.00 0.00 108,000.00

MAIN LIGHT DISTRIBUTION BOARD

ELECTRICAL: Page 4


5/22

Sl.

No

DSR

NO



C1c Non-sch SUB MAIN POWER DISTRIBUTION

BOARD SMPDBIncoming :415 V 200 A 35 KA 4pole MCCB (Relay

range 160-200 A) : 1 no.Multifunction meter to observe




panel.Outgoing :

5 Nos.415 V 100 A, 25KA 4 pole MCCBwith relay range 125-160A.1 Nos.415 V 63 A, 25KA 4 pole MCCB

with relay range 50-63A. 3.00 No 169,000.000.00 507,000.00

C1b Non-sch Area Lighting DBThe Road Lighting DB consists of the

following :

Incoming :1 no. 32A TPN MCBOutgoing :6 no. 16A/20A SP MCB1 no. time switch.( DAILY)1 no. 3 pole power contactor 40A1 set 4 pole 60A Al Bus Barcomplete with all interconnection 1.00 No 21,584.00 0.00 21,584.00

ELECTRICAL: Page 5


6/22

Sl.

No

DSR

NO


Qty Unit DSR NDSR DSR NDSR SUPPLY AND FIXING OF TPN MCB DB

C2 2.33

TPMCB

DB

sheet steel MCB distribution board, 415V

on surface/ recessed, complete with

tinned copper Bus bar, neutral link, earth

bar, din bar, detachable grand plate,

interconnections, phosphatized powder

painted including earthing etc. as

required.(but without MCB/ RCCB/

Isolator)a 2.33.1

4 way (4+12, single door horizontal type) 8.00 nos 820.00

6,560.00 0.00

b 2.33.2

6 way (4+18, single door horizontal type) 1.00 nos 959.00

959.00 0.00

2.35

VTTPM

CBDB

Suppling, installation, testing and

commissioning of surface/ recessed

mounting, vertical type, 415V, TPNMCB

Distribution board of sheet steel, dustprotected, duly phophatised and powder

painted, inclussive of 200A tinned copper

bus bar, common neutral link, earth bar,

din bar for mounting MCB's, detachable

gland/ Knock out plate, and with 100A

10Ka MCCB as incomer, interconnection

between incomer MCCB and Busbars of

following ways (but with out MCBs) as

required.

2.35.2

8 way with 100A MCCB as incommer 16.00 no 3,553.00

56,848.00 0.00

SUPPLY AND FIXING OF SPN

CONSUMER UNIT

ELECTRICAL: Page 6


7/22

Sl.

No

DSR

NO



C3 2.32

SPMCB

DBCO

upp y ng an x ng o o ow ng waysheet steel MCB distribution board

consumer unit, 240V on surface/

recessed, complete with tinned copper

Bus bar, neutral link, earth bar, din bar,

hinged front acrylic cover for the MCB

knobs, detachable grand plate,

interconnections, phosphatized and

powder painted including painting,

earthing etc. as required.(but without

MCB, RCCB, Isolator).

a 2.32.1 2+4 way 1.00 each 559.00 559.00 0.00b 2.32.2 2+8 wat 4.00 each 654.00 2,616.00 0.00

SUPPLY AND FIXING OF 5A to 32A L

series MCB:

C4 2.52

MCBC Supplying and fixing 5amps to 32 amps

rating 240V, 'C' series, MCB suitable for

inductive load of following poles in the

existing MCB DB complete with

connections, testing and commissioning

etc. as required. (Category B)

a 2.52.1 Single Pole 342.00 each 94.00 32,148.00 0.00B 2.52.3 Triple pole 74.00 each 383.00 28,342.00 0.00

S/F DP MCB ISOLATORC5 2.54

MCBDP

IS

Supply and fixing following rating double

pole 240V, isolator in the existing MCB DB

complete with connections, testing and

commissioning etc as required.

2.54.1 40A 5.00 each 166.00 830.00 0.00

ELECTRICAL: Page 7


8/22

Sl.

No

DSR

NO



C6 2.55

MCBTP

IS S/F TP MCB ISOLATOR

Supply and fixing following rating 4 pole

400V, isolator in the existing MCB DB

complete with connections, testing and

commissioning etc as required.

2.55.2 63 A 12.00 each 362.00 4,344.00 0.00

C7 non-

schedul

e

Providing and fixing G.I. pipes complete

with G.I. fittings if required including

trenching and refilling etc.for cable

rotectiona 50 mm dia. Nominal bore 8.00 meter 450.00 0.00 3,600.00b 100 mm dia. Nominal bore 8.00 meter 1,100.00 0.00 8,800.00c 150 mm dia. Nominal bore 26.00 meter 1,600.00 0.00 41,600.00

DISTRIBUTION CABLE :SUPPLYING OF CABLE :

C8 non-

schedul

e

Supplying, Transportation & handling of

1.1 KV grade XLPE insulated and PVC

sheathed armoured aluminium conductor

cable of following size conforming of

IS:1554 (Part-I) :2 core 10 sq.mm. PVCA Al. Cable. 100.00 meter 215.00 0.00 21,500.00

a 4 core 16 sq.mm. PVCA Al. Cable. 100.00 meter 330.00 0.00 33,000.00b 4 core 10 sq.mm. PVCA Al. Cable. 90.00 meter 263.00 0.00 23,670.00c 3.5 core 300 sq.mm. PVCA Al. Cable. 60.00 meter 2,890.00 0.00 173,400.00d 3.5 core 35 sq.mm. PVCA Al. Cable. 300.00 meter 497.00 0.00 149,100.00e 3.5 core 150 sq.mm. PVCA Al. Cable. 40.00 meter 1,490.00 0.00 59,600.00f 3.5 core 70 sq.mm. PVCA Al. Cable. 60.00 meter 827.00 0.00 49,620.00g 3.5 core 50 sq.mm. PVCA Al. Cable. 150.00 meter 697.00 0.00 104,550.00

ELECTRICAL: Page 8


9/22

Sl.

No

DSR

NO



C9 1.1

MVCBG

R25 MV Cable Laying upto 25sqmm in ground:

Laying of 1 no. PVC insul and PVC

sheathed / XLPE cable of 1.1 KV grade

size not exceeding 25sqmm, direct in

ground including excavation, sand

cousioning, protective covering and

refilling the treanch etc as required. 120.00 meter 85.00

10,200.00 0.00

C10 1.2

MVCBG

R120

MV Cable Laying upto 120 sqmm in

ground:



size exceeding 25sqmm but not

exceeding 120 sqmm, direct in ground

including excavation, sand cousioning,protective covering and refilling the

treanch etc as required. 75.00 meter 91.00

6,825.00 0.00

C11 MV Cable Laying upto 400 sqmm in

ground:

1.3

MVCBG

R400



size exceeding 120sqmm but not

exceeding 400 sqmm, direct in ground

including excavation, sand cousioning,protective covering and refilling the

treanch etc as required. 60.00 meter 97.00

5,820.00 0.00

0.00 0.001.11

MVCBS

UR 25

and PVC sheathed/ XLPE aluminium

conductor cable of 1.1 KV grade of size

not exceeding 25sqmm on surface as

required. 190.00 meter 31.00

5,890.00 0.00

ELECTRICAL: Page 9


10/22

Sl.

No

DSR

NO



1.12

MVCBS

UR 120

Laying and fixing of 1 no PVC insulated

and PVC sheathed/ XLPE aluminium

conductor cable of 1.1 KV grade of size

exceeding 25sqmm but not exceeding

120sqmm on surface as required. 435.00 meter 59.00

25,665.00 0.00

1.13

MVCBSUR 400

Laying and fixing of 1 no PVC insulated

and PVC sheathed/ XLPE aluminiumconductor cable of 1.1 KV grade of size

exceeding 120sqmm but not exceeding

400sqmm on surface as required. 40.00 meter 61.00

2,440.00 0.00

BASS COMPRESSION GRAND

C12 4.1

MVET S/M LV/MV cable end termination

Supplying and making end terminationwith brass compression grand and

aluminium lugs for following sizes of PVC

insulated and PVC sheathed/ XLPE

aluminium conductor cable of 1.1 KV

grade as required.

a 4.1.2 2 x 10 sqmm 14.00 each 76.00 1,064.00 0.00b 4.1.32 4 x 10 sqmm 16.00 each 104.00 1,664.00 0.00C12 4.1.33 4 x 16 sqmm 10.00 each 196.00 1,960.00 0.00

d 4.1.26 3.5 x 150 sqmm 6.00 each 278.00 1,668.00 0.00e 4.1.30 3.5 x 300 sqmm 2.00 each 508.00 1,016.00 0.00

4.1.21 3.5 x 35 sqmm 26.00 each 137.00 3,562.00 0.004.1.23 3.5 x 70 sqmm 2.00 each 168.00 336.00 0.004.1.22 3.5 x 50 sqmm 9.00 each 146.00 1,314.00 0.00

C14 1.5

WGSTL

PP2

Power Plug wiring in steel conduit (2 x

4 sqmm)

ELECTRICAL: Page 10


11/22

Sl.

No

DSR

NO



Wiring for light/ power plug with 2x4sqmm

FRPVC insulated copper conductor single

core cable in surface/ recessed steel

conduit along with 1 no 4sqmm FRPVC

insulated copper conductor single core

cable for loop earthing as required. 2600.00 meter 136.00

353,600.00 0.00

(For Lab equipment power plug wiring)

C15 1.14

WGPVCSB Circuit/ submain wiring in PVC conduit

Wiring for circuit / submain wiring along

with earth wire with the following sizes of

FRPVC insulated copper conductor,

single core cable in surface/ recessed in

conduit as required.

a 1.14.1 2 x1.5 sqmm + 1x 1.5sqmm earth wire 1900.00 meter 71.00 134,900.00 0.00(Circuit wiring)

b 1.14.1 2 x1.5 sqmm + 1x 1.5sqmm earth wire 750.00 meter 71.00 53,250.00 0.00(6amp plug wiring)

c 1.14.3 2 x4 sqmm + 1x 4sqmm earth wire 1500.00 meter 97.00 145,500.00 0.00d 1.14.4 2 x6 sqmm + 1x 6sqmm earth wire 10.00 meter 127.00 1,270.00 0.00e 1.14.9 4 x 4 sqmm + 2x 4 sqmm earth wire 5.00 meter 148.00 740.00 0.00f 1.14.10 4 x 6 sqmm + 2x 6 sqmm earth wire 5.00 meter 207.00 1,035.00 0.00

C15 1.7

WGSTLSB Circuit/ submain wiring in Steel conduit

Wiring for circuit / submain wiring along

with bearth wire with the following sizes of

FRPVC insulated copper conductor,

single core cable in surface/ recessed in

conduit as required.

e 1.7.9 4 x 4 sqmm + 2x 4 sqmm earth wire 1250.00 meter 190.00 237,500.00 0.00(For Lab equipment power plug wiring)

ELECTRICAL: Page 11


12/22

Sl.

No

DSR

NO



a 1.7.1 2 x1.5 sqmm + 1x 1.5sqmm earth wire 300.00 meter 109.00 32,700.00 0.00(Circuit wiring)

b 1.7.1 2 x1.5 sqmm + 1x 1.5sqmm earth wire 350.00 meter 109.00 38,150.00 0.00(6amp plug wiring)

1.7.10 4 x 6 sqmm + 2x 6 sqmm earth wire 550.00 meter 258.00 141,900.00 0.00

10 A LIGHT PLUG POINT WIRING ON

BOARD

C16 non-schedul

e

Wiring for 10 A light plug point on board

with 1100volt grade single core 3 Nos.1.5 sq. mm

(1 greencolour for earth) PVC insulated flexible

copperconductor cable (IS:694) complete with

providing

and fixing of 10 A 3 pin socket on switchboard and 10 A switch, earthing the 3rd

pin, etc. as requiredWith Modular Switch and approved

coloured plate 97.00 Point 698.000.00 67,706.00

POINT WIRING FOR LIGHT, FAN, ETC. :

C17 non-

schedul

e

Wiring for light/ ceiling fan / exhaust fan/

call bell point with 2x 1.5 sq.mm PVC

insulated copper conductor cable insurface/ recessed PVC conduit as

required.

a With 10A Modular Switch and approved

colour plate (primary point) 500.00 Point 895.000.00 447,500.00

b Secondary point without switch 300.00 Point 666.00 0.00 199,800.00

ELECTRICAL: Page 12


13/22

Sl.

No

DSR

NO



C17 non-

schedul

e

Wiring for light/ ceiling fan / exhaust fan/

call bell point with 2x 1.5 sq.mm PVC

insulated copper conductor cable in

surface/ recessed steel conduit as

required.

a With 10A Modular Switch and approved

colour plate (primary point) 100.00 Point 996.000.00 99,600.00

b Secondary point without switch 55.00 Point 767.00 0.00 42,185.00

2.62

MCBDP

SOC20

Supply and fixing 20A 240V SPN

Industrial type, socket outlet, with 2 pole

and earth metal enclosed plug top along

with 20A C series SPMCB, in sheet steel

enclosure, on surface or in recessed, with

chained metal cover for the socket outlet

and complete with connection, testing and

commissioning etc as required. 15.00 each 520.00

7,800.00 0.00

2.64

MCBTP

SOC30

Supply and fixing 30A, 415V , TPN

Industrial type, socket outlet, with 4 pole

and earth metal enclosed plug top along

with 30A C series TPMCB, in sheet steel

enclosure, on surface or in recessed, with

chained metal cover for the socket outlet

and complete with connection, testing and

commissioning etc as required. 18.00 each 1,294.00

23,292.00 0.00

non-

schedul

e

Supply and fixing power unit consisting

20A starter, 25A socket, 25A plug top with

4 module plate and box complete as

required. 14.00 each 1,150.00

0.00 16,100.00

SUPPLY & FIXING OF 16 A SOCKET

OUTLET& SWITCH :

ELECTRICAL: Page 13


14/22

Sl.

No

DSR

NO



C18 non-schedul

e

with 16A controlling switch, mounting box

and front cover on wall surface or

recessed in wall complete with chase

cutting, making good all damages to

originalfinish, interconnection, painting, etc. as

required tobe completed in all respect.

With Modular Switch/ socket andapproved coloured plate. 30.00 No. 941.00

0.00 28,230.00

SUPPLY & FIXING OF 10/6 A SOCKET

OUTLET & SWITCH :

C19 non-

schedul

e

Supply and fixing of 10/6 A socket outlet

withcontrolling switch, mounting box and front

cover on

wall surface or recessed in wall completewithchase cutting, making good all damages

to originalfinish, interconnection, painting, etc. as

required tobe completed in all respect.With Modular Switch/ socket and

approved coloured plate. 132.00 No. 711.000.00 93,852.00

ELECTRICAL: Page 14


15/22

Sl.

No

DSR

NO



C20 non-schedul

e

Supply and fixing of 16/13/10 A combined

socket outlet with the following i.e. (a) 1no

16A controlling switch with 16/10A socket,

(b) 1no 16A switch & 1no 13A universal

socket and ( c) 1no 10A switch & 10A

socket outlet, in single modular mounting

box and front cover on wall/ table surface

or recessed in wall complete with chase

cutting, making good all damages tooriginal.finish, interconnection, painting, etc. as

required to be completed in all respect.With Modular Switch/ socket and

approved coloured plate. 54.00 no 2,109.000.00 113,886.00

C21 non-

schedul

e

upp y ng ns a a on o sur ace

mounted Industrial type luminior with

stove enamelled reflector 2x36W T8 eqvWIPRO cat no WCF 26236 SWG,

suspended with required length of 2x

20mm dia painted MS conduit complete

with clamping arrangement as required, . 90.00 nos 3,583.00

0.00 322,470.00

C21 non-

schedul

e

Supplying & Installation of recessed type

integral low bay luminiar simillar to

WIPRO cat no WHH91070 with 1x 70W

MHL (double ended) fixed in metal falseceiling/ cladding complete as required. . 10.00 nos 9,565.00

0.00 95,650.00

C21 non-

schedul

e

mounted mirror optic luminior with

2x14wT5 eqv. PHILIPS cat no TCS

350/214 MI HF. 142.00 nos 3,088.00

0.00 438,496.00

ELECTRICAL: Page 15


16/22

Sl.

No

DSR

NO



C22 non-schedul

e

mounted mirror optic luminior with 2xTL5

28W PHILIPS cat no TCS 350/228 MI

HF. 82.00 nos 3,697.00

0.00 303,154.00

C25 non-

schedul

e

Supplying & Installation of surface

mounted mirror optic lumeniar with

paralite P5 louvers complete with 2x36w

CFL eqv. WIPRO cat no. WVP 44236. 18.00 nos 5,800.00

0.00 104,400.00

C26 non-schedul

e

Supplying & Installation of recessed

mounted mirror optic lumeniar with

paralite P5 louvers complete with 2x36w

CFL eqv. WIPRO cat no. WVP 24236. 36.00 nos 5,550.00

0.00 199,800.00

C27 non-

schedul

e

Supplying & Installation of wall mounted

decorative lumeniar with cylindrical

diffuser including 1x8W CFL eqv. cat

no.CITY-1 of Havells wall mounting range. 6.00 nos 935.00

0.00 5,610.00

C28 non-

schedul

e


mounted ceiling decorative lumeniar with

diffuser including 1x55 W 2D lamp eqv.

cat no.CASPER of Havells. 2.00 nos 11,535.00

0.00 23,070.00

C29 non-

schedul

e


mounted ceiling light low depth

downlighter with fresnel lens and 2 x 18W

CFL eqv. WIPRO WCP 28218. 65.00 nos 1,896.00

0.00 123,240.00

C30 non-

schedul

e

Supplying & Installation of slim energy

saving tube fitting with 1x 28W FTL(T5)

eqv. WIPRO cat no. WIF 21128 SWG 65.00 nos 1,858.00

0.00 120,770.00

C31 non-

schedul

e

Supplying & Installation of slim energysaving tube fitting with 2x 28W FTL(T5)

eqv. WIPRO cat no. WIF 21228 APF 14.00 nos 3,350.00

0.00 46,900.00

C32 non-

schedul

e

Supplying & Installation of bulk head fitting

with 1x 9W PL-S Lamp eqv. Philips

FXC/101. 2.00 nos 1,190.00

0.00 2,380.00

C33 non-

schedul

e

Supplying & Installation of decobattens

with 1x 14 w(T5) TLS eqv. Philips TWG

207 1x14w TLSHF 1.00 nos 955.00

0.00 955.00

ELECTRICAL: Page 16


17/22

Sl.

No

DSR

NO



C34 non-schedul

e

Supplying & Installation of decobattenswith 1x 28 w(T5) TLS eqv. Philips TWG

207 1xTLS28wHF 1.00 nos 1,200.00

0.00 1,200.00

non-

schedul

e

Supplying & Installation of decorative

surface mounted circular fitting with 2 x

18W CFL ( THORN cat no. ORBITLITE S

CORS 218 (E) or equivant. 70.00 nos 5,871.00

0.00 410,970.00

non-

schedul

e

Supplying & Installation of Out door

luminiar suitable for 70W (I) HPSV lamp

integral Translucent of KLITE ID 6831 with10' long Colombia pole complete with all

asseccories of Metal Coat ID No. 6005. 12.00 16,600.00

0.00 199,200.00

non-

schedul

e

Supplying & Installation Emergency light

with 8W PL lamp and one hour battery

backup Cat no. 617 31/617 87 G5NM of

Legrand 11.00 nos 7,820.00

0.00 86,020.00

C38 1.42

ITCFFD

R

ITC fluroscent fitting with down rods and

copper wiring: Installation, testing andcommissioning of prewired, flourescent

fittings of all types complete with all

accessories and tube etc. including supply

and fixing ball and socket arrangement,

2nos. down rods of 20mm dia x 1.6mm

thick steel conduit upto 30cm. length

painting and wiring the down rod and

connection with 1.5sqmmfFR PVC

insulated Cu conducter single core cable

and earthing etc. as required.

200.00 Each 126.00

25,200.00 0.00

ELECTRICAL: Page 17


18/22

Sl.

No

DSR

NO



C39 1.41ITCFFS

UR

ITC fluroscent fitting directly on surfacewith copper wiring: Installation, testing and

commissioning of prewired, flourescent

fittings of all types complete with all

accessories and tube etc. directly on

ceiling/wall including connections with 1.5

sq.mm FR PVC insulated, copper

conductor, single core cable and earthing

etc. as required25.00 Each 43.00

1,075.00 0.00

C40 1.43

EXTDR

P/F extra down rod with copper wiring:

Providing and fixing extra conduit down

rod of 20 mm dia. 2 X 10 cm length with 2

X 1.5 sq.mm FR PVC insulated , copper

conductor , single core cable including

painting etc. as required (Note: more than

5 cm length shall be rounded to the

nearest 10 cm. and 5 cm. or less shall be250.00 Each 17.00

4,250.00 0.00

C41 non-

schedul

e

Supply of 1200 AC ceiling fan of Delux

model quality, complete as required. 42.00 no 2,214.00

0.00 92,988.00

non-

schedul

e

Supply of 1400 AC ceiling fan of Delux

model quality, complete as required. 248.00 no 2,400.00

0.00 595,200.00

C42 non-

schedul

e

Supply of 300mm dia Metal body Exhaust

fan with louvers. 32.00 no 3,036.00

0.00 97,152.00

non-

schedul

e

Supply of 450mm dia Metal body heavy

duty Exhaust fan with louvers. 12.00 no 4,680.00

0.00 56,160.00

C43 non-

schedul

e

Supply and installing 400mm dia with

rotating head wall bracket fan suitable for

240 V AC supply. 13.00 no 2,150.00

0.00 27,950.00

ELECTRICAL: Page 18


19/22

Sl.

No

DSR

NO



C44 non-schedul

e

Supply and fixing 2 module ceiling fanregulator in the existing switch plate as

required. 290.00 no 500.00

0.00 145,000.00

C45 1.44

ITCCF

I T C of ceiling fan including wiring the

down rods of standard length (upto 30cm)

with 1.5 sqmm FRPVC insulated copper

conductor single core cable etc as

required, upto 450mm sweep in the

existing opening, including making the

hole to suit the size of the above fan,

making good the damage, connections,

testing, commissioning etc. as required.290.00 Each 45.00

13,050.00 0.00

C46 1.52

ITCEF4

50

Installation of exhaust fan upto 450mm

sweep in the existing opening, including

making the hole to suit the size of the

above fan, making good the damage,

connections, testing, commissioning etc.

as required. 44.00 Each 223.00

9,812.00 0.00

C47 1.54

LOUSH

EF

Fixing louvres /shutters for exhaust

fan:Extra for fixing the louvres /shutters

complete with frames for exhaust fans of

all sizes 44.00 Each 65.00

2,860.00 0.00

C48 4.2

LCFGI

Providing and fixing of lightning conductor

finial, made of 25mm dia, 300mm long GI

tube, having single prong at top, with

85mm dia 6mm thick GI base plate

including holes etc. complete as required. 16.00 each 243.00

3,888.00 0.00

C49 4.7

LCGITS

URH

Providing and fixing GI tape 20mm x3mm

thick on parapet or surface of wall for

lightning conductors as required ( for

horizontal run) 500.00 meter 31.00

15,500.00 0.00

ELECTRICAL: Page 19


20/22

Sl.

No

DSR

NO



C50 4.8LCGITS

URV

Providing and fixing GI tape 20mm x3mm

thick on parapet or surface of wall for

lightning conductors as required ( for

verticall run) 200.00 meter 43.00

8,600.00 0.00

C51 4.12

LCTJGI

Providing and fixing testing joints, made of

20mm x 3mm thick GI strip, 125mm long

with 4 Nos of GI bolts nuts check nuts and

spring washer complete as required. 8.00 each 37.00

296.00 0.00

C52 3.5EARGIP

L

GI Earth Plate Electrode : Earthing with GIplate 600mm x 600mm x 6mm thick

including accessories and providing

masonry enclosure with cover plate

having locking arrangement and watering

pipe etc. (but without charcoal or coke and

salt complete) as required. 14.00 set 1,585.00

22,190.00 0.00

C53 3.7

EARCH

ARPL

Salt /charcoal for plate earth electrode:

Extra for using charcoal and salt for G.I.

copper plate earth electrode as required14.00 set 603.00

8,442.00 0.00

3.10

EAR6G

GIWR

Supply & Laying of 6 SWG GI wire at

0.5meter below ground level / along cable

thru pipe for conductor earth electrode

including soldering etc s required. 400.00 meter 16.00

6,400.00 0.00

ELECTRICAL: Page 20


21/22

Sl.

No

DSR

NO



Providing, Installation, Testing andCommissioning of Otis or equivalent make

Electric Traction Passenger Elevator of 10

person (680 Kgs) capacity Elevators,

traveling from ground floor to third floor (4

stops, 4 opening,) stopped at all floor and

opening on the same side, 1 m/s speed,

AC varable voltage variable frequency (

with close loop) controlled, simplex full

collective, automatic with ACVVVF door

operator & multi-ray door detector system,

stainless steel hair finished car and car

door, etc complete ( Otis model code No.

OPTIMUS-7C10A-7-18M) as per

specification and instruction of Engineer in

charge. The work also include all building/

structural works for supporting

arrangement system, necessaryscaffolding required for erection of the

complete system, necessary wiring and

installation of lighting for lift well and lift pit,

providing ladder in the lift pit etc. as 1.00 each 2,070,000.00

0.00 2,070,000.00

C55 Non-

schedule

Supply, installation, testing &

commissioning of Hi wall split unit with

outdoor unit, Indoor Unit, refrigeration pipe

of required length (with insulation as

required), PVC drainout pipes of requiredlength, electrical starter unit with

necessary wiring etc. complete as per

instruction of engineer-in-charge. The rate

shall be inclussive of the cost of

supporting system of the outdoor unit.

a 2.0 TR 12.00 each 45,000.00 0.00 540,000.00

ELECTRICAL: Page 21


22/22

Sl.

No

DSR

NO



b 1.5 TR 2.00 each 42,000.00 0.00 84,000.00

Rs. 1,495,830.00Cost after index Rs. 2,587,785.90

Rs. 9,165,218.00

SUB-TOTAL (DSR)

SUB-TOTAL (NON-SCH)

ELECTRICAL: Page 22

Boq Electrical

Documents

Transcript of Boq Electrical