BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF GROUND ... · boq - details of final quote for...

8
BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF GROUND FLOOR TOILET at NGC, NOIDA Dated: Feb 12, 2018 S.No. ITEM / DESCRIPTION QTY UNITS RATE AMOUNT 1.00 DEMOLITION, DISMANTLING & CARTAGE Thick polythene sheet/Tarpaulin covering Proper covering of entrance to toilet with thick polythene sheet / Tarpaulin to keep out dust from renovation area. The 1.01 sheet will be permanent during the course of the project and will be changed in case of damage. Proper signage will also be maintain stating nature of renovation work under progress. 1.00 job 1.02 Demolition & removal of counter stone in all designated areas as per dwg; and removal of debris from site. 2.08 sqm 1.03 Demolition & removal of all ceramic tiles in all floor and wall areas; and removal of 102.93 sqm debris from site. 1.04 Demolition & dismantling of brick walls, RCC counter and granite stone; and removal of debris from site. 8.70 cum 1.05 Removal of existing sanitary and CP fitting and packing in bubble wrap. 1.00 job 1.06 Removal of doors, electrical fittings and other remaining items. 1.00 job SubTotal (A) 2.00 CIVIL WORK 2.01 Brickwork in 230 mm thick wall extension as/design in cement mortar 1:4 (1 6.58 cum cement and 4 stone dust). 2.02 Brickwork in 115 mm thick wall extension as/design in cement mortar 1:4 (1 24.00 sqm cement and 4 stone dust). Cement Plaster P/L internal 10 mm - 25 mm thick cement plaster on walls 2.03 including repairs on existing walls in 1:6 (1 cement and 6 stone dust) on scraped wall surface, ceiling, cill, lintel, cloumn etc. making smooth edge and corners complete. 132.30 sqm RCC Slab for counters - 100 mm RCC slab for counters including centering, 2.04 shuttering, finishing and nominal reinforcement. Concrete in M20 or in ration 1:1.5:3 (1 cement: 1.5 stone dust : 3 stone aggregate 15-20 mm nominal grade) 2.08 sqm Waterproofing - Providing and laying water proofing treatment to vertical and 2.05 horizontal surfaces of depressed portions of W.C., toilets and the like consisting of P/L water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 58.84 sqm SubTotal (G) 3.00 FLOORING / STONE WORK Vitrified Tile Flooring - P/L of 60 cm x 60 cm high quality digital vitrified tile (thickness as per tile manufacturer) edge to edge in floor areas in pattern as per 3.01 drawings and details on 20 mm thick cement mortar 1:4 (1 cement and 4 stone dust) including grouting the joints with white cement and matching pigment etc. (base rate of tile - INR 55/sqft) Cost includes cartage to site, proper storage, cutting, sizing and fixing. 26.65 sqm. Granite stone counters - P/L 18-20 mm thick granite stone on RCC counter slab in pattern as per drawings and details on 20 mm thick cement mortar 1:4 (1 3.02 cement and 4 stone dust) in cluding grouting the joints with white cement and matching pigment etc. Stone sample to be approved by the architects or engineer in charge. Cost includes cartage to site, proper storage, cutting, sizing and fixing. Base cost of stone landed at site including taxes: INR 265/ per sqft. 2.50 sqm. SubTotal (B) 4.00 WALL FINISHING

Transcript of BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF GROUND ... · boq - details of final quote for...

BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF GROUND FLOOR TOILET at NGC, NOIDA

Dated: Feb 12, 2018

S.No. ITEM / DESCRIPTION QTY UNITS RATE AMOUNT

1.00 DEMOLITION, DISMANTLING & CARTAGE

Thick polythene sheet/Tarpaulin covering ‐ Proper covering of entrance to toilet

with thick polythene sheet / Tarpaulin to keep out dust from renovation area. The

1.01 sheet will be permanent during the course of the project and will be changed in

case of damage. Proper signage will also be maintain stating nature of renovation

work under progress. 1.00 job

1.02

Demolition & removal of counter stone in all designated areas as per dwg; and

removal of debris from site. 2.08 sqm

1.03 Demolition & removal of all ceramic tiles in all floor and wall areas; and removal of 102.93 sqm debris from site.

1.04

Demolition & dismantling of brick walls, RCC counter and granite stone; and

removal of debris from site. 8.70 cum

1.05 Removal of existing sanitary and CP fitting and packing in bubble wrap. 1.00 job

1.06 Removal of doors, electrical fittings and other remaining items. 1.00 job

Sub‐Total (A)

2.00 CIVIL WORK

2.01 Brickwork in 230 mm thick wall extension as/design in cement mortar 1:4 (1 6.58 cum cement and 4 stone dust).

2.02 Brickwork in 115 mm thick wall extension as/design in cement mortar 1:4 (1 24.00 sqm cement and 4 stone dust).

Cement Plaster ‐ P/L internal 10 mm - 25 mm thick cement plaster on walls

2.03 including repairs on existing walls in 1:6 (1 cement and 6 stone dust) on scraped wall surface, ceiling, cill, lintel, cloumn etc. making smooth edge and corners

complete. 132.30 sqm

RCC Slab for counters - 100 mm RCC slab for counters including centering,

2.04 shuttering, finishing and nominal reinforcement. Concrete in M20 or in ration 1:1.5:3 (1 cement: 1.5 stone dust : 3 stone aggregate 15-20 mm nominal grade)

2.08 sqm

Waterproofing - Providing and laying water proofing treatment to vertical and

2.05 horizontal surfaces of depressed portions of W.C., toilets and the like consisting of

P/L water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying

: a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4

hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure

for 4 hours followed with water curing for 48 hours. The rate includes preparation

of surface, treatment and sealing of all joints, corners, junctions of pipes and

masonry with polymer mixed slurry.

58.84 sqm

Sub‐Total (G)

3.00 FLOORING / STONE WORK

Vitrified Tile Flooring - P/L of 60 cm x 60 cm high quality digital vitrified tile

(thickness as per tile manufacturer) edge to edge in floor areas in pattern as per

3.01 drawings and details on 20 mm thick cement mortar 1:4 (1 cement and 4 stone

dust) including grouting the joints with white cement and matching pigment etc.

(base rate of tile - INR 55/sqft)

Cost includes cartage to site, proper storage, cutting, sizing and fixing. 26.65 sqm.

Granite stone counters - P/L 18-20 mm thick granite stone on RCC counter slab

in pattern as per drawings and details on 20 mm thick cement mortar 1:4 (1

3.02 cement and 4 stone dust) in cluding grouting the joints with white cement and

matching pigment etc. Stone sample to be approved by the architects or engineer

in charge.

Cost includes cartage to site, proper storage, cutting, sizing and fixing.

Base cost of stone landed at site including taxes: INR 265/ per sqft. 2.50 sqm.

Sub‐Total (B)

4.00 WALL FINISHING

Ceramic Wall tile - P/L of 30 cm x 60 cm ceramic wall tiles (thickness as per tile

manufacturer) edge to edge on wall surface in pattern as per drawings and details

4.01 on 20 mm thick cement mortar 1:4 (1 cement and 4 stone dust) including grouting

the joints with white cement and matching pigment etc.

Cost includes cartage to site, proper storage, cutting, sizing and fixing.

Base cost of tile landed at site including taxes: INR 45/- per sqft. 94.50 sqm

Wall Putty - P/applying white cement based putty of average thickness 1 mm on

4.02 non tiled area, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 37.80 sqm

Sub‐Total (C)

5.00 ELECTRICAL/LIGHTING/VENTILATION

Internal point wiring for light point/ fan point/ exhaust fan point/ call bell point etc.

with 1.5 Sq. mm LSFR PVC insulated copper conductor single core cable in

5.01 surface/ recessed steel or PVC conduit, with modular switch, modular plate,

suitable size GI box and earthing the point with 1.5 sq.mm LSFR PVC insulated

copper conductor single core cable etc as required. 28.00 points

Wiring for light/ power plug with 2x4 sq.mm LSFR PVC insulated copper

5.02 conductor single core cable in surface/ recessed steel conduit alongwith 1 no. 4 sq.mm LSFR PVC insulated copper conductor single core cable for loop earthing

as required.

a 6/16A switch socket 6.00 points

Supplying and fixing following rating, double pole, (single phase and neutral), 240

5.03 volts, RCCB complete with connections, testing and commissioning etc, as

required. 1.00 job

5.04 Installing, testing and commissioning of electrical fixtures and fittings

a P/F of 18 W recessed/concelaed ceiling LED lights 19.00 nos

b P/F of 18 W mirros light fixtures 4.00 nos

c P/F of 300mm self closing louvred exhaust fans for toilet exhaust, to be fixed in

aluminium window/door frame. 5.00 nos

d P/F of 12 W wall focusing spot light 3.00 nos

Sub‐Total (D)

6.00 PARTITION/ WALLS/DOORS/GLASS/PANELLING/WINDOWS

WC Doors - P&F of pre- laminated flush doors of 20 mm thickness in opening

6.01 size of 750 mm x 2100 mm; hardwood frame of cross section 100 mm x 50 mm; 150 mm gap at bottom. The cost to include providing and fixing of all necessary

hardwares and fittings with lock from inside. 4.00 nos

Main Entrance Door - P&F of pre- laminated flush doors of 40 mm thickness in

opening size of 900 mm x 2100 mm; hardwood frame of cross section 100 mm x

6.02 50 mm; 10 mm gap at bottom. The cost to include providing and fixing of all

necessary hardwares and fittings with lock from outside.

2.00 nos

6.03 Looking Glass (Mirror) - P&F mirror of size 1800 mm x 1200 mm x 6 mm thk., to 2.00 no. be pasted on 6 mm thk ply as base, to be fixed with SS studs.

Toilet Urinal Glass Partitions - P&F frosted toughened glass partitions size 400

6.04 mm x 1000 mm x 6 mm thk., to be fixed with SS hardware. The edge of glass to be 4 mm chamfered both sides. 3.00 nos

Wallpaper Graphic - P/F and pasting fabric finish wall paper (0.4mm to 0.5 mm

6.05 thick) as per design & Details. The item includes making POP base to get a uniform smooth surface. Complete to the satisfaction of the Architect/Engineer in

charge.

6.06 Base cost of wallpaper: INR 55/- per sqft. 7.20 sqm

Sub‐Total (E)

7.00 PAINT WORK

7.01 Wall and ceiling Painting in Toilet - Acrylic emulsion paint, 3 or more coats on 55.50 sqm walls and ceiling after necessary preparation of base surfaces.

7.02 Enamel Paint - Enamel painting of the window frame with necessary preperation 1.00 job of MS frame surface and primer.

Sub‐Total (F)

8.00 FALSE CEILING

8.01 Gypboard grid Ceiling - P/F 12 mm thick Gypboard grid false ceiling consisting

of GI frame work made of 20 mm x 50 mm x 16 gauge as main runners @ 4’ c/c

on both ways and 15 mm x 20 mm x 18 gauge secondary runners @ 2’ c/c, main

runners suspended from true ceiling. 26.60 sqm

Sub‐Total (H)

9.00 PLUMBING / DRAINAGE / FITTING CHARGES (currently selected from Hindware /Jaquar / Camry)

9.01 P/F of plumbing and drainage pipes in CPVC pipe and fittings for - including bend, traps and all required internal fitting

a Urinals 4.00 nos

b Wall hung WC, flush, healthfaucet and angle valve 4.00 nos

c Wash basin 4.00 nos

d Floor drains 8.00 nos

9.02 Fixing of under counter wash basin 4.00 nos

9.03 Fixing of wash basin faucet 4.00 nos

9.04 Fixing of hand dryer 2.00 nos

9.05 Fixing of bottle trap 4.00 nos

9.06 Fixing of angle valves 20.00 nos

10.00 CHINAWARE AND CP FITTINGS (currently selected from Hindware / Jaquar)

10.01 Supply of under counter wash basin 4.00 nos

10.02 Supply of wash basin faucet (make hindware - F320011) 4.00 nos

10.03 Supply of hand dryer (Make camry) 2.00 nos

10.04 Supply of bottle trap 4.00 nos

10.05 Supply of angle valves 20.00 nos

10.06 Supply of paper roll holder 4.00 nos

10.07 Supply of urinal (make hindware - 60011) 4.00 nos

10.08 Supply of health Faucet (make hindware) 4.00 nos

10.08 Supply of wall hung WC with cistern (make hindware - 92535) 4.00 nos

10.09 Supply and fixing of liquid soap dispenser 2.00 nos

10.10 Supply of floor drain 8.00 nos

TOTAL

GST @ 18%

GRAND TOTAL (inclusive of applicable taxes)

BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF FIRST FLOOR TOILET at NGC, NOIDA

Dated: Feb 12, 2018

S.No. ITEM / DESCRIPTION QTY UNITS RATE AMOUNT

1.00 DEMOLITION, DISMANTLING & CARTAGE

Thick polythene sheet/Tarpaulin covering ‐ Proper covering of entrance to toilet

with thick polythene sheet / Tarpaulin to keep out dust from renovation area. The

1.01 sheet will be permanent during the course of the project and will be changed in

case of damage. Proper signage will also be maintain stating nature of renovation

work under progress. 1.00 job

1.02

Demolition & removal of counter stone in all designated areas as per dwg; and

removal of debris from site. 2.08 sqm

1.03 Demolition & removal of all ceramic tiles in all floor and wall areas; and removal of 102.93 sqm debris from site.

1.04

Demolition & dismantling of brick walls, RCC counter and granite stone; and

removal of debris from site. 8.70 cum

1.05 Removal of existing sanitary and CP fitting and packing in bubble wrap. 1.00 job

1.06 Removal of doors, electrical fittings and other remaining items. 1.00 job

Sub‐Total (A)

2.00 CIVIL WORK

2.01 Brickwork in 230 mm thick wall extension as/design in cement mortar 1:4 (1 6.58 cum cement and 4 stone dust).

2.02 Brickwork in 115 mm thick wall extension as/design in cement mortar 1:4 (1 24.00 sqm cement and 4 stone dust).

Cement Plaster ‐ P/L internal 10 mm - 25 mm thick cement plaster on walls

2.03 including repairs on existing walls in 1:6 (1 cement and 6 stone dust) on scraped wall surface, ceiling, cill, lintel, cloumn etc. making smooth edge and corners

complete. 132.30 sqm

RCC Slab for counters - 100 mm RCC slab for counters including centering,

2.04 shuttering, finishing and nominal reinforcement. Concrete in M20 or in ration 1:1.5:3 (1 cement: 1.5 stone dust : 3 stone aggregate 15-20 mm nominal grade)

2.08 sqm

Waterproofing - Providing and laying water proofing treatment to vertical and

2.05 horizontal surfaces of depressed portions of W.C., toilets and the like consisting of

P/L water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying

: a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4

hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure

for 4 hours followed with water curing for 48 hours. The rate includes preparation

of surface, treatment and sealing of all joints, corners, junctions of pipes and

masonry with polymer mixed slurry.

58.84 sqm

Sub‐Total (G)

3.00 FLOORING / STONE WORK

Vitrified Tile Flooring - P/L of 60 cm x 60 cm high quality digital vitrified tile

(thickness as per tile manufacturer) edge to edge in floor areas in pattern as per

3.01 drawings and details on 20 mm thick cement mortar 1:4 (1 cement and 4 stone

dust) including grouting the joints with white cement and matching pigment etc.

(base rate of tile - INR 55/sqft)

Cost includes cartage to site, proper storage, cutting, sizing and fixing. 26.65 sqm.

Granite stone counters - P/L 18-20 mm thick granite stone on RCC counter slab

in pattern as per drawings and details on 20 mm thick cement mortar 1:4 (1

3.02 cement and 4 stone dust) in cluding grouting the joints with white cement and

matching pigment etc. Stone sample to be approved by the architects or engineer

in charge.

Cost includes cartage to site, proper storage, cutting, sizing and fixing.

Base cost of stone landed at site including taxes: INR 265/ per sqft. 2.50 sqm.

Sub‐Total (B)

4.00 WALL FINISHING

Ceramic Wall tile - P/L of 30 cm x 60 cm ceramic wall tiles (thickness as per tile

manufacturer) edge to edge on wall surface in pattern as per drawings and details

4.01 on 20 mm thick cement mortar 1:4 (1 cement and 4 stone dust) including grouting

the joints with white cement and matching pigment etc.

Cost includes cartage to site, proper storage, cutting, sizing and fixing.

Base cost of tile landed at site including taxes: INR 45/- per sqft. 94.50 sqm

Wall Putty - P/applying white cement based putty of average thickness 1 mm on

4.02 non tiled area, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 37.80 sqm

Sub‐Total (C)

5.00 ELECTRICAL/LIGHTING/VENTILATION

Internal point wiring for light point/ fan point/ exhaust fan point/ call bell point etc.

with 1.5 Sq. mm LSFR PVC insulated copper conductor single core cable in

5.01 surface/ recessed steel or PVC conduit, with modular switch, modular plate,

suitable size GI box and earthing the point with 1.5 sq.mm LSFR PVC insulated

copper conductor single core cable etc as required. 28.00 points

Wiring for light/ power plug with 2x4 sq.mm LSFR PVC insulated copper

5.02 conductor single core cable in surface/ recessed steel conduit alongwith 1 no. 4 sq.mm LSFR PVC insulated copper conductor single core cable for loop earthing

as required.

a 6/16A switch socket 6.00 points

Supplying and fixing following rating, double pole, (single phase and neutral), 240

5.03 volts, RCCB complete with connections, testing and commissioning etc, as

required. 1.00 job

5.04 Installing, testing and commissioning of electrical fixtures and fittings

a P/F of 18 W recessed/concelaed ceiling LED lights 19.00 nos

b P/F of 18 W mirros light fixtures 4.00 nos

c P/F of 300mm self closing louvred exhaust fans for toilet exhaust, to be fixed in

aluminium window/door frame. 5.00 nos

d P/F of 12 W wall focusing spot light 3.00 nos

Sub‐Total (D)

6.00 PARTITION/ WALLS/DOORS/GLASS/PANELLING/WINDOWS

WC Doors - P&F of pre- laminated flush doors of 20 mm thickness in opening

6.01 size of 750 mm x 2100 mm; hardwood frame of cross section 100 mm x 50 mm; 150 mm gap at bottom. The cost to include providing and fixing of all necessary

hardwares and fittings with lock from inside. 4.00 nos

Main Entrance Door - P&F of pre- laminated flush doors of 40 mm thickness in

opening size of 900 mm x 2100 mm; hardwood frame of cross section 100 mm x

6.02 50 mm; 10 mm gap at bottom. The cost to include providing and fixing of all

necessary hardwares and fittings with lock from outside.

2.00 nos

6.03 Looking Glass (Mirror) - P&F mirror of size 1800 mm x 1200 mm x 6 mm thk., to 2.00 no. be pasted on 6 mm thk ply as base, to be fixed with SS studs.

Toilet Urinal Glass Partitions - P&F frosted toughened glass partitions size 400

6.04 mm x 1000 mm x 6 mm thk., to be fixed with SS hardware. The edge of glass to be 4 mm chamfered both sides. 3.00 nos

Wallpaper Graphic - P/F and pasting fabric finish wall paper (0.4mm to 0.5 mm

6.05 thick) as per design & Details. The item includes making POP base to get a uniform smooth surface. Complete to the satisfaction of the Architect/Engineer in

charge.

6.06 Base cost of wallpaper: INR 55/- per sqft. 7.20 sqm

Sub‐Total (E)

7.00 PAINT WORK

7.01 Wall and ceiling Painting in Toilet - Acrylic emulsion paint, 3 or more coats on 55.50 sqm walls and ceiling after necessary preparation of base surfaces.

7.02 Enamel Paint - Enamel painting of the window frame with necessary preperation 1.00 job of MS frame surface and primer.

Sub‐Total (F)

9.00 PLUMBING / DRAINAGE / FITTING CHARGES (currently selected from Hindware /Jaquar / Camry)

9.01 P/F of plumbing and drainage pipes in CPVC pipe and fittings for - including bend, traps and all required internal fitting

a Urinals 4.00 nos

b Wall hung WC, flush, healthfaucet and angle valve 4.00 nos

c Wash basin 4.00 nos

d Floor drains 8.00 nos

9.02 Fixing of under counter wash basin 4.00 nos

9.03 Fixing of wash basin faucet 4.00 nos

9.04 Fixing of hand dryer 2.00 nos

9.05 Fixing of bottle trap 4.00 nos

9.06 Fixing of angle valves 20.00 nos

10.00 CHINAWARE AND CP FITTINGS (currently selected from Hindware / Jaquar)

10.01 Supply of under counter wash basin 4.00 nos

10.02 Supply of wash basin faucet (make hindware - F320011) 4.00 nos

10.03 Supply of hand dryer (Make camry) 2.00 nos

10.04 Supply of bottle trap 4.00 nos

10.05 Supply of angle valves 20.00 nos

10.06 Supply of paper roll holder 4.00 nos

10.07 Supply of urinal (make hindware - 60011) 4.00 nos

10.08 Supply of health Faucet (make hindware) 4.00 nos

10.08 Supply of wall hung WC with cistern (make hindware - 92535) 4.00 nos

10.09 Supply and fixing of liquid soap dispenser 2.00 nos

10.10 Supply of floor drain 8.00 nos

TOTAL

GST @ 18%

GRAND TOTAL (inclusive of applicable taxes)

MALE TOILET

4760X2700

FEMALE

TOILET

4760X2100

EXISTING

MALE TOILET

4760 X 3900

FEMALE TOILET

4760 X 2100

PROPOSED

1. ALL DIMENSIONS ARE IN MM.

Client Detail Noida Golf Course Job Title Proposed and Existing Layout Golf Course, Noida, U.P

BANQUET HALL

MALE TOILET

4760X2700

FEMALE

TOILET

4760X2100

EXISTING

BANQUET HALL

MALE TOILET

4760 X 3900

FEMALE TOILET

4760 X 2100

PROPOSED