BOOTH-SR40-48 acoustic doors flush frame datasheet
-
Upload
booth-commercial -
Category
Documents
-
view
218 -
download
2
description
Transcript of BOOTH-SR40-48 acoustic doors flush frame datasheet
TYP
E A
Lea
f
BOOTH-FD FIRE RESISTANT (integrity) steel doorset
Designed primarily for internal use on commercial, industrial and infrastructure projects the BOOTH FD doorset has been tested for periods up to 4 hours fire resistance, isCERTIFIRE certified and manufactured to the ISO9001 Quality Assurance Standard
FIRE DOOR - INTEGRITY PD02
CloserDORMA TS71 or TS83 as standard
Locks & LeversDIN Standard locks with stainless steel levers as standard. Also available with architect specified hardware (subject to fire rating requirements)
Hinge3 No. (up to 2250mm tall door) 112x100mm class 13 stainless steel ball bearing hinges
FrameSingle or double rebate profile
Flush edge
LeafGalvanized steel construction with a bonded honeycomb core
Sound Proof
Security Heat/Thermal Proof
Fire Proof Smoke Proof
Air Pressure
SMOKE CONTROLBS476: Part 31.1
FIRE TESTED BS EN1634-1 up to 240 minutes integrity
Sound Proof
Security Heat/Thermal Proof
Fire Proof Smoke Proof
Air Pressure
SOUND REDUCINGEN ISO 717-1 up to 35dB
Sound Proof
Security Heat/Thermal Proof
Fire Proof Smoke Proof
Air Pressure
BOOTH-FD FIRE RESISTANT steel door set
Available in
Construction
Available in
Construction
FIRE DOOR - INTEGRITY PD02
Door Leaf• 45mm thick, constructed from two skins of galvanized
steel bonded to a structural honeycomb core
The vertical edges of the skins are folded to create a full height interlocking seam for increased panel strength and rigidity.
The void between the two skins is in-filled with a bonded honeycomb core material, selected for its compression & torsional load performance.
The hinging edge is reinforced by steel hinge mounting plates welded within the leaf, and the lock mechanism is installed within an inner enclosure to facilitate is removal for future maintenance or replacement.
On externally located double doors an astragal is fitted to one leaf to ensure positive sealing at the centre.
Frame• 1.5mm galvanised steel folded to form a
double or single rebate profile
Frame sections are pressed from 1.5mm galvanised steel to form a double (standard) or single rebate profile. Headers are profiled to form a smooth, butt joint with the full height vertical posts and headers include bolt fixing for positive engagement.
Uprights are reinforced with steel plates at all hinge & lock points. Shallow depth thresholds are available at extra cost, either as folded steel or extruded aluminium sections
Frames are arranged for bolt fixing to any suitable opening structure.
HardwareHinges: As standard, door leaves are pre-hung with 1½ pairs of 3.4mm thick stainless steel grade 13 hinges, CE marked for use on fire resisting doors. For door leaves above 2250mm high 2 pairs of hinges are fitted. Hinges are recessed into to the frame and edge of the leaf.
Locks & Latches: A complete range of standard locks & latches are available, CE marked for use on fire resisting steel doorsets.
Alternative locks & latches which have been CERTIFIRE approved for use on steel door sets are deemed suitable for use.
Handles:Stainless steel levers & pull handles are fitted as standard.
Self Closing Devices: Overhead face fixed (standard) or concealed overhead door closers are fitted to both latched and unlatched doorsets.
BOOTH-FD doorsets are also available with CERTIFIRE approved floor springs and top pivots.
NB: Closers with hold-open mechanisms are not permitted and are not available.
Other Items:Manual lever action flush bolts for double door passive leaves; door viewers; letter plates; door signs, etc. are available
Whatever hardware is selected all items are normally factory fitted, requiring no additional assembly work on site.
Vision PanelsVision panels are available in various standard sizes, glazed with CERTIFIRE approved glass and gaskets.
Smoke SealsA variety of approved compression seals are available, fitted to the frame to leaf rebate, between the leading edges of double door leaves and in the bottom edge of door leaves.
FinishesDoorsets are supplied with standard factory PPC applied rust inhibiting primer or factory applied PPC finish to any BS or RAL colour.
Door WeightBooth-FD doors weigh approximately 25 kg/sq. metre.
Whilst every effort is made to ensure that this datasheet is comprehensive and accurate, Booth Industries will not accept any liability for errors or omissions
Contact us at:PO Box 50, Nelson Street, Bolton, Greater Manchester BL3 2APTel: +44(0)1204 366333 Fax: +44(0)1204 380888Email: [email protected]